Honda CR-Z 2011

Honda CR-Z 2011
2011 Honda CR-Z
ABOUT THE VEHICLE
Make: Honda
Model: CR-Z
Year: 2011
Scosche Pro App
STANDARD/ OPTIONAL
- AM/FM in-dash CD Player
- Navigation Radio
- Satillite Radio
- Steering Wheel Controls
- Bluetooth
- 3.5mm Aux/USB/iPod
SPEAKER NOTES
Front Speakers
Dash Speaker:
1 1/2”
Lower Door:
6 1/2”
Speaker Adapter: SAHC634
Speaker Harness: SHHA02B
Speaker Assembly: (1) Phillips Head Screw
Securing Speaker
Dimensions:
Tweeter
L: 1.56”
W: 1.56”
D: 0.62”
Rear Speakers
Side Panel:
Subwoofer:
Speaker Adapter:
Speaker Harness:
Speaker Assembly:
Dimensions:
Door
L: 6.62”
W: 6.62”
D: 2.25”
6 1/2”
8”
SAHC634
SHHA02B
(1) Phillips Head Screw
Securing Speaker
Side
L: 6.62”
W: 6.62”
D: 2.25”
SUB
L: 8.43”
W: 8.43”
D: 4.37”
APPLICATIONS
Dash Type:
Aftermarket Type:
Aftermarket Kit:
Harness:
Antenna Adapter:
A
:
Auxiliary Input:
USB Input:
New Custom Dash
Single/Double Din
HA1712B
HA11B
HAA2B
To The Left Of The Radio
Opening
On Radio Face
In Pocket Below Radio
FACTORY COLOR CODES
(+)12v Battery
(+)12v Accessory
(-) 12v Ground:
(+)12v Amp Turn On:
Left Front Speaker (+):
Left Front Speaker (-):
Right Front Speaker (+):
Right Front Speaker (-):
Left Rear Speaker (+):
Left Rear Speaker (-):
Right Rear Speaker (+):
Right Rear Speaker (-):
Pink
Purple
Black
White
Yellow
Pink
Light Green
Orange
Red
Green
Light Green
White
2011 Honda CR-Z
PRELIMINARY:
Disconnect the negative battery cable.
RADIO
1. Use PRT to unclip upper panel in pocket below radio, unplug
and remove.
2. Remove (1) 8mm bolt on bottom side of radio.
3. Use PRT to unclip the radio.
4. Pull radio out unplug harness and antenna then remove radio.
FRONT DOOR SPEAKERS
1. Use PRT to unclip (2) plastic window trim pieces.
2. Use small flathead screwdriver to remove cover behind
door handle.
3. Unscrew (2) phillip head screws behind panel just removed.
4. Use PRT to remove rubber triangle located in the door grab.
5. Remove (1) phillips head screw.
6. Use PRT to unclip window switch panel, unplug and remove.
7. Unscrew (1) phillips head screw located under the window
switch panel.
8. Use PRT to unclip door panel.
9. Unplug harness and remove door panel.
10. Unscrew (1) phillips head screw securing speaker.
11. Pull out speaker unplug harness and remove.
VEHICLE DISASSEMBLY
Make: Honda
Model: CR-Z
Year:
2011
Scosche Pro App
DASH SPEAKERS
1. Use PRT to unclip dash gril.
2. Unplug harness and remove.
3. Use PRT to remove tweeter from dash grill.
REAR SIDE SPEAKERS
Rear Right Negative:
Brown/ Pink
1. Use PRT to unclip speaker grill.
2. Unscrew (1) phillips head screw securing speaker.
3. Pull speaker out, unplug and remove.
2011 Honda CR-Z
PRELIMINARY:
Disconnect the negative battery cable.
VEHICLE DISASSEMBLY
Make: Honda
Model: CR-Z
Year:
2011
AMPLIFIER
SUBWOOFER
1. Remove cargo cover.
2. Unclip and remove the floor carpet.
3. Use PRT to unclip rear sill plate and remove.
4. Remove styrofoam inserts on both sides of the spare tire.
5. Unscrew bolt in middle of spare tire, then remove tire.
6. Use PRT to unclip trunk floor panel and remove.
7. Use PRT to unclip rear dome light, unplug and remove.
8. Use PRT to unclip rear side light, unplug and remove.
9. Use PRT to unclip the back of the side panel.
10. Undo door gasket, use PRT to unclip the front of the
side panel, remove panel.
11. Unplug subwoofer harness.
12. Unscrew (4) 10mm bolts securing subwoofer enclosure.
13. Unscrew (4) phillip head screws securing subwoofer grill.
14. Unscrew (8) phillip head screws securing subwoofer to
the enclosure.
15. Remove subwoofer enclosure from vehicle.
16. Unscrew (1) phillips head screw to release subwoofer from
the enclosure.
17. Unplug harness and remove subwoofer.
Scosche Pro App
TBA
AUX/USB
ANTENNA
Located on radio face.
Rear Right Negativ :
Located in the pocket below the radio.
Pink
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising