SPECIFICATIONS
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
SPECIFICATIONS
AR
CUSTOMER
:
MODEL NO.
:
GFT043HA480272Y
Version
:
A
TEC
DATE
:
2011.02.14
CERTIFICATION :
LOG
HNO
Customer Sign
ROHS
Sales Sign
Approved By
Prepared By
GIFAR
GIFAR
2011.02.14
2011.02.14
HAZEL
DONLIN
Y
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
台北縣樹林市中山路二段 249 巷 11 號
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
TEL: +886-2-2680-7766 FAX: +886-2-2668-8378
TEL: +886-2-2680-7766
PAGE 1/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
Revision Record
Data(y/m/d) Ver.
2011.02.14
A
Description
Note
page
Specification released
AR
Y
LOG
HNO
TEC
TEL: +886-2-2680-7766
PAGE 2/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
Contents
1. General Specifications …………………………………………………………….…………………4
2. Pin Assignment …………………………………………………………………….………….……..5
2.1. TFT LCD Panel Driving Section.................................................................................................5
AR
2.2. Touch Screen Panel Section.........................................................................................................7
3. Operation Specifications…………………………………………..……………….…………………8
3.1. Absolute Maximum Ratings ........................................................................................................8
3.2. Typical operation conditions .......................................................................................................9
3.3 Backlight Driving Conditions .......................................................................................................9
TEC
3.4. Power Sequence .........................................................................................................................10
3.5. Timing Characteristics ................................................................................................................11
3.5.1. Timing Conditions..............................................................................................................11
3.5.2. Timing Diagram .................................................................................................................12
4. Touch Screen Panel Specifications …………………………………………………………………..13
4.1. Electrical Characteristics ............................................................................................................13
LOG
HNO
4.2. Mechanical & Reliability Characteristics .................................................................................. 14
4.3. Linearity Definition ....................................................................................................................15
4.4. Housing design guide …………………………………………………………………………..16
5. Optical Specifications ……………………………….…………………………………………….....17
6. Reliability Test Items …………………………………..…………………………………………….21
7. General Precautions ………………………………………………………………………………….22
7.1. Safety ..........................................................................................................................................22
7.2. Handling .....................................................................................................................................22
7.3. Static Electricity..........................................................................................................................22
7.4. Storage ........................................................................................................................................22
7.5. Cleaning .....................................................................................................................................22
8. Mechanical Drawing ……………………..………………………………………………………….23
Y
TEL: +886-2-2680-7766
PAGE 3/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
1.General Specifications
No.
Specification
1
LCD size
4.3 inch(Diagonal)
2
Driver element
a-Si TFT active matrix
3
Resolution
480 × 3(RGB) × 272
4
Display mode
Normally White, Transmissive
5
Dot pitch
0.066(W) × 0.198(H) mm
6
Active area
95.04 (W) × 53.856(H) mm
7
Module size
8
Surface treatment
Anti-Glare
9
Color arrangement
RGB-stripe
10
Interface
11
Backlight Power consumption
0.558W(Typ.)
Note 2
12
Panel Power consumption
0.056W(Typ.)
Note 3
AR
Item
TEC
105.5(W) × 67.2(H) × 4.05(D) mm
Note 1
LOG
HNO
Note 1: Refer to Mechanical Drawing.
Remark
Digital
Y
TEL: +886-2-2680-7766
PAGE 4/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
2.Pin Assignment
2.1. TFT LCD Panel Driving Section
FPC Connector is used for the module electronics interface. The recommended model is
“FH19SC-40S-0.5SH” manufactured by HIROSE.
Symbol
I/O
Function
1
VLED-
P
Power for LED backlight cathode
2
VLED+
P
Power for LED backlight anode
3
GND
P
Power ground
4
VDD
P
Power voltage
5
R0
I
Red data (LSB)
6
R1
I
Red data
7
R2
I
Red data
8
R3
I
Red data
9
R4
I
Red data
10
R5
I
Red data
11
R6
I
Red data
12
R7
I
Red data (MSB)
13
G0
I
Green data (LSB)
14
G1
I
Green data
15
G2
I
Green data
16
G3
I
Green data
17
G4
I
Green data
18
G5
I
Green data
19
G6
I
Green data
20
G7
I
Green data (MSB)
AR
Pin No.
PAGE 5/24
Y
LOG
HNO
TEC
TEL: +886-2-2680-7766
Remark
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
B0
I
Blue data (LSB)
22
B1
I
Blue data
23
B2
I
Blue data
24
B3
I
Blue data
25
B4
I
Blue data
26
B5
I
Blue data
27
B6
I
Blue data
28
B7
I
Blue data (MSB)
29
GND
P
Power ground
30
CLK
I
Pixel clock
31
DISP
I
Display on/off
32
NC
-
No connection
33
NC
-
No connection
34
DE
I
Data Enable
35
NC
-
No connection
36
GND
P
Power ground
37
X1
I/O
Right electrode – differential analog
38
Y1
I/O
Bottom electrode – differential analog
39
X2
I/O
Left electrode – differential analog
40
Y2
I/O
Top electrode – differential analog
AR
GIF
21
Environmentally Certified
Y
LOG
HNO
TEC
Note: I: input, O: output t, P: Power
TEL: +886-2-2680-7766
PAGE 6/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
2.2. Touch Screen Panel Section
GIF
Pin No.
Symbol
I/O
1
X1
Right
2
Y1
Bottom
4
Remark
Right electrode – differential analog
Bottom electrode – differential analog
AR
3
Function
X2
Left
Left electrode – differential analog
Y2
Top
Top electrode – differential analog
Note: Touch Screen Panel Block
Y
LOG
HNO
TEC
TEL: +886-2-2680-7766
PAGE 7/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
3. Operation Specifications
3.1. Absolute Maximum Ratings
Item
Symbol
Power voltage
Values
Unit
Remark
Max.
VCC
-0.5
5.0
V
Logic input
-0.5
5.0
V
Operation temperature
TOP
-20
70
℃
Note 3,4
Storage temperature
TST
-30
80
℃
Note 3,4
LED Reverse Voltage
VR
-
1.2
V
Each LED
Note 2
LED Forward Current
IF
-
25
mA
Each LED
Input signal voltage
AR
Min.
LOG
HNO
TEC
Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times. A module
should be used with any of the absolute maximum ratings exceeded, the characteristics of the module may
not be recovered, or in an extreme condition, the module may be permanently destroyed.
Note 2: VR Conditions: Zener Diode 20mA
Note 3: 90% RH Max. (Max wet temp. is 60℃)
Maximum wet-bulb temperature is at 60℃ or less. And No condensation (no drops of dew)
Note 4: In case of temperature below 0℃,the response time of liquid crystal (LC) becomes slower and the color of
Y
panel darker than normal one.
TEL: +886-2-2680-7766
PAGE 8/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
3.2. Typical Operation Conditions
GIF
Item
Symbol
Power voltage
Values
Unit
Typ.
Max.
VDD
3.1
3.3
3.5
V
Current for Driver
IVDD
-
17
25
mA
Input logic high voltage
VIH
0.8VDD
-
VDD
V
Input logic low voltage
VIL
GND
-
0.2VDD
V
AR
Min.
Remark
VDD=3.2V
Note1
Note1: CLK, DE, R0~ R7, G0~ G7, B0~ B7.
Item
Voltage for LED Backlight
Current for LED Backlight
LED life time
TEC
3.3 Backlight Driving Conditions
Symbol
Values
Unit
Remark
31.5
V
Note2
20
22
mA
-
-
Hr
Min.
Typ.
Max.
VL
25.2
27.9
IL
18
20,000
-
Note3
LOG
HNO
Note 1: The “LED life time” is defined as the module brightness decrease to 50% original brightness that the
ambient temperature is 25℃ and IL =20mA. The
LED lifetime could be decreased if operating IL is lager than 20 mA.
Note 2: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and
IL =20mA.
Y
TEL: +886-2-2680-7766
PAGE 9/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
3.4. Power Sequence
GIF
To prevent a latch-up or DC operation of the LCD module, the power on/off sequence should be as the
diagram below.
AR
LOG
HNO
TEC
Symbol
Symbol
T1
Specification
0≦T1≦10 msec
T4
Specification
160 msec ≦T4
T2
0≦T2≦100 msec
T5
160 msec ≦T5
T3
0≦T3≦200 msec
T6
1 msec ≦T6
Y
TEL: +886-2-2680-7766
PAGE 10/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
3.5. Timing Characteristics
GIF
3.5.1. Timing Conditions
Parallel DE mode RGB input timing table
Parameter
Symbol
CLK frequency
Values
Unit
Typ.
Max.
fclk
7
9
12
MHz
DEV period time
Tv
277
288
400
H
DEV display area
Tvd
DEV blanking
Tvb
5
16
128
H
DEH period time
Th
520
525
800
CLK
AR
Min.
DEH blanking
CLK cycle time
TEC
DEH display area
Clock width of high level
Clock falling time
Data Setup Time
Thd
H
480
CLK
Thb
40
45
320
CLK
Tclk
83
110
143
ns
Tcwh
40
50
60
%
LOG
HNO
Clock width of low level
Clock rising time
272
Tcwl
40
50
60
%
trck
-
9
ns
tfck
-
9
ns
tdesu
10
-
-
ns
Data Hold Time
tdahd
10
-
-
ns
DE Setup Time
tdesu
10
-
-
ns
tdehd
10
-
-
ns
DE Hold Time
Y
TEL: +886-2-2680-7766
PAGE 11/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
3.5.2. Timing Diagram
AR
GIF
Y
LOG
HNO
TEC
TEL: +886-2-2680-7766
PAGE 12/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
4. Touch Screen Panel Specifications
4.1. Electrical Characteristics
Item
Values
Unit
Remark
Typ.
Max.
-1.5
-
1.5
%
Analog X and Y directions
300
-
1500
Ω
X
100
-
900
Ω
Y
Insulation resistance
25
-
-
MΩ
DC 25V
Voltage
-
5
7
V
DC
Chattering
-
-
10
ms
100kΩ pull-up
Transparency
80
-
-
%
JIS K7105
Linearity
AR
Min.
Terminal Resistance
TEC
Note: Avoid operating with hard or sharp material such as a ball point pen or a mechanical pencil except a
polyacetal pen (tip R0.8mm or less) or a finger.
Y
LOG
HNO
TEL: +886-2-2680-7766
PAGE 13/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
4.2. Mechanical & Reliability Characteristics
GIF
Item
Values
Unit
Remark
-
gf
Note 1
-
characters
Note 2
-
-
touches
Note 3
-
-
H
JIS K5400
Typ.
Max.
Activation force
80
-
Durability-surface
scratching
Write
100,000
-
Durability-surface
pitting
1,000,000
Surface hardness
3
AR
Min.
TEC
Note 1: Activation force test condition
(1) Input DC 5V on X direction, Drop off Polyacetal Stylus (R0.8), until output voltage stabilize ,then get the
activation force。
(2) R8.0mm Silicon rubber for finger Activation force test
(3) Test point: 9 points
LOG
HNO
Y
Note 2: Measurement for surface area.
-Scratch 100,000 times straight line on the film with a stylus change every 20,000 times.
-Force: 250gf.
-Speed: 60mm/sec.
-Stylus: R0.8 polyacetal tip.
Note 3: Pit 1,000,000 times on the film with a R0.8 silicon rubber.
-Force: 250gf.
-Speed: 2times/sec.
TEL: +886-2-2680-7766
PAGE 14/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
4.3. Linearity Definition
AR
GIF
LOG
HNO
TEC
Va: maximum voltage in the active area of touch panel
Vb: minimum voltage in the active area of touch panel
X: random measuring point
Vxm: actual voltage of Lx point
Vxi: theoretical voltage of Lx point
Linearity = [|Vxi-Vxm |/(Va-Vb)]*100%
Note: Test area is as follows and operation force is 150gf.
Y
TEL: +886-2-2680-7766
PAGE 15/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
4.4. Housing design guide
GIF
Housing design follow as below
1) Avoid the design that housing overlap and press on the active area of the LCM
2) Give enough gap(over 0.5mm at compressed) between the housing and TSP to protect wrong operating.
AR
TEC
3) Use a buffer material(Gasket) between the TSP and housing to protect damage and wrong operating
4) Avoid the design that buffer material overlap and press on the inside of TSP view area.
Y
LOG
HNO
TEL: +886-2-2680-7766
PAGE 16/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
5. Optical Specifications
Item
Condition
θL
Response time
Contrast ratio
Unit
Remark
degree
Note 1
Note 7
20
msec
Note 3
15
30
msec
Note 3
400
500
-
-
Note 4
0.26
0.31
0.36
-
Note 2
Note 5
Note 6
Note7
Typ.
Max.
Φ=180°(9 o’clock)
60
70
-
θR
Φ=0°(3 o’clock)
60
70
-
θT
Φ=90°(12 o’clock)
40
50
-
θB
Φ=270°(6 o’clock)
60
70
-
TON
-
10
TOFF
-
CR
WX
Normal
θ=Φ=0°
TEC
Color chromaticity
Values
Min.
AR
Viewing angle
(CR≥10)
Symbol
WY
0.28
0.33
0.38
-
Luminance
L
250
400
-
cd/m2
Note 6
Luminance uniformity
YU
70
75
-
%
Note 8
2. The test systems refer to Note 2.
Y
LOG
HNO
Test Conditions:
1. VDD=3.3V, IL=20mA (Backlight current), the ambient temperature is 25℃.
TEL: +886-2-2680-7766
PAGE 17/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
Note 1: Definition of viewing angle range
AR
GIF
TEC
Fig. 4-1 Definition of viewing angle
Y
LOG
HNO
Note 2: Definition of optical measurement system.
The optical characteristics should be measured in dark room. After 30 minutes operation, the optical
properties are measured at the center point of the LCD screen. (Response time is measured by Photo
detector TOPCON BM-7, other items are measured by BM-5A/Field of view: 1° /Height: 500mm.)
Fig. 4-2 Optical measurement system setup
TEL: +886-2-2680-7766
PAGE 18/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
AR
GIF
Note 3: Definition of Response time
The response time is defined as the LCD optical switching time interval between “White” state and “Black”
state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And
fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%.
TEC
Fig. 4-3 Definition of response time
Note 4: Definition of contrast ratio
Luminance measured when LCD on the "White" state
Contrast ratio (CR) = —————————————————————————————
LOG
HNO
Luminance measured when LCD on the "Black" state
Note 5: Definition of color chromaticity (CIE1931)
Color coordinates measured at center point of LCD.
Note 6: All input terminals LCD panel must be ground while measuring the center area of the panel. The LED
driving condition is IL=20mA.
Note 7: The values shall be measured without Touch Screen Panel.
Y
TEL: +886-2-2680-7766
PAGE 19/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
Note8: Definition of Luminance Uniformity
Active area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every measuring point is placed at the
center of each measuring area.
B min
Luminance Uniformity (Yu) = —————
B Max
AR
L-------Active area length
W----- Active area width
LOG
HNO
TEC
Fig. 4-4 Definition of measuring points
Bmax: The measured maximum luminance of all measurement position.
Bmin: The measured minimum luminance of all measurement position.
Y
TEL: +886-2-2680-7766
PAGE 20/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
Item
GIF
6. Reliability Test
Remark
240 hrs
Note 1, 4
Low Temperature Storage
Ta = -30℃
240hrs
Note 1, 4
High Temperature Operation
Ts = 70℃
240hrs
Note 2, 4
Low Temperature Operation
Ta = -20℃
240hrs
Note 1, 4
Operate at High Temperature and
Humidity
+60℃, 90%RH
240 hrs
Note 5
Thermal Shock
-30℃/30 min ~ +80℃/30 min for a total 100
AR
High Temperature Storage
Test Conditions
Ta = 80℃
Note 4
cycles, Start with cold temperature and end
with high temperature
Mechanical Shock
Frequency range:10~55Hz
Stroke:1.5mm
Sweep:10Hz~55Hz~10Hz
2 hours for each direction of X. Y. Z.
(6 hours for total)
TEC
Vibration Test
LOG
HNO
100G 6ms,±X, ±Y, ±Z 3 times for each
direction
Package Vibration Test
Random Vibration :
0.015G*G/Hz from 5-200HZ,
-6dB/Octave from 200-500HZ
2 hours for each direction of X. Y. Z.
(6 hours for total)
Package Drop Test
Height: 60 cm
1 corner, 3 edges, 6 surfaces
Electro Static Discharge
± 2KV, Human Body Mode, 100pF/1500Ω
Y
Note 1: Ta is the ambient temperature of samples.
Note 2: Ts is the temperature of panel’s surface.
Note 3: In the standard condition, there shall be no practical problem that may affect the display function. After the
reliability test, the product only guarantees operation, but doesn’t guarantee all the cosmetic specification.
Note 4: Before cosmetic and function tests, the product must have enough recovery time, at least 2 hours at room
temperature.
Note 5: Before cosmetic and function tests, the product must have enough recovery time, at least 24 hours at room
temperature.
TEL: +886-2-2680-7766
PAGE 21/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
GIF
7. General Precautions
7.1. Safety
Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or clothes, wash it
off immediately by using soap and water.
7.2. Handling
AR
1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its
surface.
2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other
damages.
3. To avoid contamination on the display surface, do not touch the module surface with bare hands.
4. Keep a space so that the LCD panels do not touch other components.
5. Put cover board such as acrylic board on the surface of LCD panel to protect panel from damages.
6. Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions
where the condensation of dew occurs.
7. Do not leave module in direct sunlight to avoid malfunction of the ICs.
TEC
7.3. Static Electricity
1. Be sure to ground module before turning on power or operating module.
2. Do not apply voltage which exceeds the absolute maximum rating value.
LOG
HNO
7.4. Storage
1. Store the module in a dark room where must keep at 25±10℃ and 65%RH or less.
2. Do not store the module in surroundings containing organic solvent or corrosive gas.
3. Store the module in an anti-electrostatic container or bag.
7.5. Cleaning
1. Do not wipe the polarizer with dry cloth. It might cause scratch.
2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the
polarizer.
Y
TEL: +886-2-2680-7766
PAGE 22/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
AR
GIF
8. Mechanical Drawing
Y
LOG
HNO
TEC
TEL: +886-2-2680-7766
PAGE 23/24
FAX.:+886-2-2668-8378
晶 發 科 技 有 限 公 司
GI FAR TECHNOLOGY CO.,LTD
Quality Certified
No. 11, Lane 249, Sec. 2, Chung Shan Rd., Shulin City, Taipei Hsien, Taiwan, R.O.C.
ISO 9001:2008
ISO 14001:2004
Licence No: TA1062-QC-EC
Licence No: TA1062-QC-EC
Environmentally Certified
CONNECT DRAWING
AR
GIF
Y
LOG
HNO
TEC
TEL: +886-2-2680-7766
PAGE 24/24
FAX.:+886-2-2668-8378
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising