KW-R520 - Wavetech Imports
ENGLISH
FRANÇAIS
DEUTSCH
KW-R520
CD RECEIVER
INSTRUCTION MANUAL
RÉCEPTEUR CD
MANUEL D’INSTRUCTIONS
CD-RECEIVER
BEDIENUNGSANLEITUNG
B5A-0828-00 [E]
JS_JVC_KW_R520_E_C_00.indd 1
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
26/10/2015 1:54:07 PM
Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of
handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper
recycling and waste disposal will help conserve resources whilst preventing detrimental effects
on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien
(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)
Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist
darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf,
sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten
und batterien abgegeben werden muss.
Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und
die Gesundheit Ihrer Mitmenschen.
Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere
Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den
kommunalen Entsorgungsbetrieben.
Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei
enthalt.
Information sur l’élimination des anciens équipements électriques et électroniques
et piles électriques (applicable dans les pays qui ont adopté des systèmes de collecte
sélective)
Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne
peuvent pas être éliminés comme ordures ménagères.
Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés
sur des sites capables de traiter ces produits et leurs déchets.
Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage
adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des
leurs effets nocifs sur notre santé et sur l’environnement.
Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient
du plomb.
i
JS_JVC_KW_R520_E_C_00.indd i
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
26/10/2015 1:54:07 PM
For Israel
Declaration of Conformity with regard to the EMC Directive
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU Representative:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
Déclaration de conformité se rapportant à la directive EMC
Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU
Fabricant:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
Représentants dans l’UE:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
Konformitätserklärung in Bezug auf die EMC-Vorschrift
Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU
Hersteller:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU-Vertreter:
JVC Technical Services Europe GmbH
Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany
ii
JS_JVC_KW_R520_E_C_00.indd ii
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
26/10/2015 1:54:07 PM
CONTENTS
BEFORE USE
BEFORE USE
2
IMPORTANT
BASICS
3
GETTING STARTED
4
• To ensure proper use, please read through this manual before using this product. It is especially important
that you read and observe Warning and Caution in this manual.
• Please keep the manual in a safe and accessible place for future reference.
1 Cancel the demonstration
2 Set the clock
3 Set the basic settings
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
CD / USB / ANDROID
5
RADIO
6
AUX
8
AUDIO SETTINGS
8
DISPLAY SETTINGS
11
REFERENCES
12
Maintenance
More information
TROUBLESHOOTING
13
SPECIFICATIONS
14
INSTALLATION /
CONNECTION
16
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level.
General:
• Avoid using the external device if it might hinder safe driving.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded
data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short
circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
How to read this manual
• Operations are explained mainly using buttons on the faceplate.
• English indications are used for the purpose of explanation. You can select the display language from the
menu. ( 4)
• [XX] indicates the selected items.
• ( XX) indicates references are available on the stated page.
2
JS_JVC_KW_R520_E_1.indd 2
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
26/10/2015 2:06:58 PM
BASICS
Faceplate
How to reset
Loading slot
Display window
TI
Your preset adjustments will
be erased except stored radio
stations.
ST
Volume knob
To
On the faceplate
Turn on the power
Press
.
• Press and hold to turn off the power.
Adjust the volume
Turn the volume knob.
Press the volume knob to mute the sound or pause playback.
• Press again to cancel.
Select a source
• Press
• Press
Change the display information
Press
repeatedly.
, then turn the volume knob within 2 seconds.
repeatedly. ( 13)
ENGLISH
JS_JVC_KW_R520_E_1.indd 3
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
3
26/10/2015 2:06:58 PM
GETTING STARTED
3
Set the basic settings
1 Press and hold
.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press
to exit.
To return to the previous setting item, press
.
Default: XX
SETTINGS
BEEP
1
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1 Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
AM *
ON: Enables AM in source selection. ; OFF: Disables.
AUX *
BT ADAPTER: Selects when the KS-BTA100 Bluetooth adapter is connected to the
AUX jack. ( 8) ; ON: Enables AUX in source selection. ; OFF: Disables.
F/W UPDATE
SYSTEM
F/W xxxx
2
Set the clock
1
2
3
4
Press and hold
.
Turn the volume knob to select [CLOCK], then press the knob.
Turn the volume knob to select [CLOCK SET], then press the knob.
Turn the volume knob to make the settings, then press the
knob.
Day Hour Minute
5 Turn the volume knob to select [24H/ 12H], then press the knob.
6 Turn the volume knob to select [12 HOUR] or [24 HOUR], then
press the knob.
7 Press
to exit.
To return to the previous setting item, press
.
ON: Activates the keypress tone. ; OFF: Deactivates.
SRC SELECT
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: <http://www.jvc.net/cs/car/>.
CLOCK
CLOCK SYNC
AUTO: The clock time is automatically set using the Clock Time (CT) data in FM
Radio Data System signal. ; OFF: Cancels.
CLOCK DISP
ON: The clock time is shown on the display even when the unit is turned off. ;
OFF: Cancels.
ENGLISH
РУССКИЙ
Select the display language for menu and music information if applicable.
By default, ENGLISH is selected.
ESPANOL
* Not displayed when the corresponding source is selected.
4
JS_JVC_KW_R520_E_1.indd 4
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
26/10/2015 2:06:59 PM
CD / USB / ANDROID
Start playback
The source changes automatically and
playback starts.
CD
Eject disc
Label side
To directly select USB/ ANDROID source, press
To
USB input terminal
USB
USB 2.0 cable*1
(commercially available)
On the faceplate
Reverse / Fast-forward*3
Press and hold
Select a track/file
Press
Select a folder*4
Press
Repeat play*3
Press
repeatedly.
TRACK RPT/ ALL RPT
: Audio CD
TRACK RPT/ FOLDER RPT/ ALL RPT : MP3/WMA/WAV/FLAC file
ONE RPT/ ALL RPT/ RPT OFF
: ANDROID
Random play*3
Press
repeatedly.
ALL RND/ RND OFF
: Audio CD
FOLDER RND/ ALL RND/ RND OFF : MP3/WMA/WAV/FLAC file
SONG RND/ ALL RND/ RND OFF
: ANDROID
ANDROID*2
Micro USB 2.0 cable*1
(commercially available)
.
.
.
.
*1 Do not leave the cable inside the car when not using.
*2 When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install
the application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting.
( 12)
3
* For ANDROID: Applicable only when [AUTO MODE] is selected. ( 6)
4
* For CD: Only for MP3/WMA files. This does not work for ANDROID.
ENGLISH
JS_JVC_KW_R520_E_1.indd 5
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
5
26/10/2015 2:06:59 PM
CD / USB / ANDROID
RADIO
Select control mode
While in ANDROID source, press
repeatedly.
AUTO MODE: Control Android device from this unit via JVC MUSIC PLAY
application installed in the Android device.
AUDIO MODE: Control Android device using the Android device itself via
other media player applications installed in the Android
device. However, you can still play/pause or file skip from
this unit.
Select music drive
Press
repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass Storage
Class).
• Selected drive of a multiple drives device.
Select a file from a folder/list
.
1 Press
2 Turn the volume knob to select a folder/list, then press the knob.
3 Turn the volume knob to select a file, then press the knob.
Quick Search
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list quickly.
• To return to the previous setting item, press
.
• To cancel, press and hold
.
• For ANDROID, applicable only when [AUTO MODE] is selected.
“ST” lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
repeatedly to select FM or AM.
1 Press
2 Press
to search for a station automatically.
(or)
Press and hold
until “M” flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESET MODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
6
JS_JVC_KW_R520_E_2_F.indd 6
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
4/11/2015 1:43:57 PM
RADIO
Select a stored station
LOCAL SEEK
ON: Searches only FM stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
IF BAND
AUTO: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to
interference noises from adjacent FM stations, but sound quality will not
be degraded and the stereo effect will remain.
MONO
ON: Improves the FM reception, but the stereo effect will be lost. ;
OFF: Cancels.
NEWS-STBY*2
ON: The unit will temporarily switch to News Programme if available. ;
OFF: Cancels.
4 Repeat step 3 until the desired item is selected/activated or follow
REGIONAL*2
the instructions stated on the selected item.
5 Press
to exit.
To return to the previous setting item, press
.
ON: Switches to another station only in the specific region using the “AF”
control. ; OFF: Cancels.
AF SET*2
ON: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ; OFF: Cancels.
TI SET*2
ON: Allows the unit to temporarily switch to Traffic Information if
available (“TI” lights up). ; OFF: Cancels.
PTY SEARCH*2
Select a PTY code (see below).
If there is a station broadcasting a program of the same PTY code as you
have selected, that station is tuned in.
Press
or one of the number buttons (1 to 6).
(or)
1 Press
.
2 Turn the volume knob to select a preset number, then press the
knob to confirm.
Other settings
.
1 Press and hold
2 Turn the volume knob to select [TUNER], then press the knob.
3 Turn the volume knob to select an item (see the following table),
then press the knob.
Default: XX
RADIO TIMER
SSM
Turns on the radio at a specific time regardless of the current source.
1 ONCE/ DAILY/ WEEKLY/ OFF: Select how often the timer will be turned
on.
2 FM/ AM: Select the band.
3 01 to 18 (for FM)/ 01 to 06 (for AM): Select the preset station.
4 Set the activation day *1 and time.
“M” lights up when complete.
Radio Timer will not activate for the following cases.
• The unit is turned off.
• [OFF] is selected for [AM] in [SRC SELECT] after Radio Timer for AM is
selected. ( 4)
SSM 01 – 06 / SSM 07 – 12 / SSM 13 – 18: Automatically presets up to
18 stations for FM. “SSM” stops flashing when the first 6 stations are stored.
Select SSM 07 – 12 / SSM 13 – 18 to store the following 12 stations.
PTY code: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE,
VARIED, POP M (music), ROCK M (music), EASY M (music), LIGHT M (music),
CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION,
PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M
(music), DOCUMENT
*1 Selectable only when [ONCE] or [WEEKLY] is selected in step 1.
*2 Only for FM source.
ENGLISH
JS_JVC_KW_R520_E_1.indd 7
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
7
26/10/2015 2:07:00 PM
AUX
AUDIO SETTINGS
Use a portable audio player
1 Connect a portable audio player (commercially available).
3.5 mm stereo mini plug with “L” shaped connector
(commercially available)
Auxiliary input jack
Portable audio player
2 Select [ON] for [AUX] in [SRC SELECT]. ( 4)
3 Press
repeatedly to select AUX.
4 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio
output.
Use a Bluetooth® device
1 Connect the Bluetooth adapter, KS-BTA100 (separately purchased).
Blue/white
Black
Brown
Wiring harness of the unit
( 17)
Blue/white: Remote
Black: Ground
Select a preset equalizer
Press
repeatedly.
(or)
Press
, then turn the volume knob within 5 seconds.
Preset equalizer: FLAT (default), HARD ROCK, HIP HOP, JAZZ, POP, R&B, TALK, USER,
VOCAL BOOST, BASS BOOST, CLASSICAL, DANCE
Store your own sound settings
to enter EASY EQ setting.
1 Press and hold
2 Turn the volume knob to select an item, then press the knob.
Refer to [EASY EQ] for setting ( 9) and the result is stored to [USER].
.
• To return to the previous setting item, press
• To exit, press
.
Brown: Tel muting
Auxiliary input jack
2
3
4
5
Register (pair) the Bluetooth device with KS-BTA100.
Select [BT ADAPTER] for [AUX] in [SRC SELECT]. ( 4)
Press
repeatedly to select BT AUDIO.
Start using the Bluetooth device.
For details, refer to the instruction manual of KS-BTA100.
8
JS_JVC_KW_R520_E_1.indd 8
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
26/10/2015 2:07:00 PM
AUDIO SETTINGS
Other settings
.
1 Press and hold
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press
to exit.
To return to the previous setting item, press
.
AUDIO
BASS BOOST
+01 — +05 (+01): Selects your preferred bass boost level. ;
OFF: Cancels.
LOUD
01 / 02: Boosts low or high frequencies to produce a well-balanced
sound at low volume. ; OFF: Cancels.
SUB.W LEVEL *1
SPK-OUT *2
00 to +06 (+03): Adjusts the output level of the
subwoofer connected via speaker lead. ( 17)
PRE-OUT *3
–08 to +08 (00): Adjusts the output level of the
subwoofer connected to the lineout terminals (REAR/
SW) through an external amplifier. ( 17)
Default: XX
EQ SETTING
EQ PRESET
EASY EQ
PRO EQ
Select a preset equalizer suitable to the music genre. (Select [USER] to use the
settings made in [EASY EQ].)
FLAT (default) / HARD ROCK / HIP HOP / JAZZ / POP / R&B / TALK / USER /
VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE
Adjust your own sound settings. The settings are stored to [USER].
SUB.W SP *1*2: 00 to +06
(Default: 03
SUB.W *1*3:
–08 to +08
00
BASS LVL:
–06 to +06
00
MID LVL:
–06 to +06
00
TRE LVL:
–06 to +06
00)
1 BASS / MIDDLE / TREBLE: Select a sound tone.
2 Adjust the sound elements of the selected sound tone.
BASS
Frequency: 60/ 80/ 100/ 200 HZ
(Default: 80 HZ
Level:
–06 to +06
00
Q:
Q1.0/ Q1.25/ Q1.5/ Q2.0
Q1.0)
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 KHZ
(Default: 1.0 KHZ
Level:
–06 to +06
00
Q:
Q0.75/ Q1.0/ Q1.25
Q1.25)
TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 KHZ (Default: 10.0 KHZ
Level:
–06 to +06
00
Q:
Q FIX
Q FIX)
SUB.W *3
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF *1
THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ /
MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than
55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.
SUB.W PHASE *1
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[SUB.W LPF].)
FADER
R06 — F06 (00): Adjusts the front and rear speaker output balance.
BALANCE *4
L06 — R06 (00): Adjusts the left and right speaker output balance.
VOL ADJUST
–15 — +06 (00): Preset the initial volume level of each source
(compared to the FM volume level). Before adjustment, select the
source you want to adjust. (“VOL ADJ FIX” appears if FM is selected.)
*1
*2
*3
*4
Displayed only when [SUB.W] is set to [ON].
Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 10)
Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W]. ( 10)
This adjustment will not affect the subwoofer output.
ENGLISH
JS_JVC_KW_R520_E_2_F.indd 9
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
9
5/11/2015 4:43:37 PM
AUDIO SETTINGS
AMP GAIN
LOW POWER: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ; HIGH POWER: The maximum volume level is 35.
Connection via speaker leads
For connections without using an external amplifier. However, with this
settings you can also enjoy the subwoofer output. ( 17)
D.T.EXP
(Digital Track
Expander)
ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ; OFF: Cancels.
TEL MUTING *5
ON: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100). ; OFF: Cancels.
REAR/REAR
Rear speakers output
Rear speakers output
REAR/SUB.W
Rear speakers output
Rear speakers output
Depending on the speaker connection method, select the appropriate
setting to get the desired output. ( Speaker output settings)
SUB.W/SUB.W
Subwoofer output
SPK/PRE OUT
*5 Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT]. ( 4)
Audio signal through rear speaker lead
Setting on
[SPK/PRE OUT]
L (left)
R (right)
(Mute)
If [SUB.W/SUB.W] is selected:
– [HIGH 120HZ] is selected in [SUB.W LPF] and [THROUGH] is not available.
– [R01] is selected in [FADER] and selectable range is [R06] to [00].
Speaker output settings
Select the output setting for the speakers [SPK/PRE OUT], base on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier. ( 17)
Audio signal through lineout terminal
Setting on
[SPK/PRE OUT]
REAR/SW
REAR/REAR
Rear speakers output
REAR/SUB.W
Subwoofer output
SUB.W/SUB.W
Subwoofer output
10
JS_JVC_KW_R520_E_2_F.indd 10
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
5/11/2015 4:43:38 PM
DISPLAY SETTINGS
BRIGHTNESS
Set the button, display and USB input terminal brightness for day and night
separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone. ( Illustration on left column)
3 Set the brightness level (00 to 31).
(Default: BUTTON ZONE: DAY: 25 ; NIGHT: 09
DISP ZONE: DAY: 31 ; NIGHT: 12)
SCROLL *2
ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at
5-second intervals. ; OFF: Cancels.
COLOR
PRESET
.
Press COL to enter [COLOR] directly.
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press
to exit.
To return to the previous setting item, press
.
Default: XX
Select a color for the button illumination.
• COLOR 01 to COLOR 49 [COLOR 08]
• USER: The color you have created for [DAY COLOR] or [NIGHT COLOR] is
shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different speeds.
DAY COLOR
Make your own day and night colors for the button illumination.
1 RED / GREEN / BLUE: Select a primary color.
2 00 to 31: Select the level.
Repeat steps 1 and 2 for all primary colors.
• Your setting is stored to [USER] in [PRESET].
DISPLAY
MENU COLOR
1 Press and hold
DIMMER
Dim the display and button illuminations.
OFF: Dimmer is turned off.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 or 6:00 PM
[OFF]: 6:00 or 6:00 AM)
AUTO: Dimmer turns on and off automatically when you turn off or on the car
1
headlights. *
NIGHT COLOR
ON: Changes the button illumination in menu mode or when selecting a
music file from a folder/list. ; OFF: Cancels.
[NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car’s
headlight.
*1 The illumination control wire connection is required. ( 17)
*2 Some characters or symbols will not be shown correctly (or will be blanked).
ENGLISH
JS_JVC_KW_R520_E_2.indd 11
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
11
29/10/2015 3:47:55 PM
REFERENCES
Maintenance
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
More information
Visit also the following website <http://www.jvc.net/cs/car/> for:
– Latest firmware updates and latest compatible item list
– Android™ application JVC MUSIC PLAY
– Any other latest information
About discs and audio files
• This unit can only play the following CDs:
• This unit can play back multi-session discs; however, unclosed sessions will be skipped
during playback.
• Unplayable discs:
- Discs that are not round.
- Discs with coloring on the recording surface or discs that are dirty.
- Recordable/ReWritable discs that have not been finalized.
- 8 cm CD. Attempting to insert using an adapter may cause malfunction.
• DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with the “Compact
Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product
cannot be recommended.
• Playable files:
- File extensions: MP3 (.mp3), WMA (.wma)
- Bit rate: MP3: 8 kbps — 320 kbps
WMA: 32 kbps — 192 kbps
- Sampling frequency:
MP3: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, 8 kHz
WMA: 8 kHz — 48 kHz
- Variable bit rate (VBR) files.
• Maximum number of characters for file/folder name:
It depends on the disc format used (includes 4 extension characters—<.mp3> or <.wma>).
- ISO 9660 Level 1 and 2: 32 characters
- Romeo: 32 characters
- Joliet: 32 characters
- Windows long file name: 32 characters
About USB devices
• This unit can play MP3/WMA/WAV/FLAC files stored on a USB mass storage class device.
• You cannot connect a USB device via a USB hub.
• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
• The maximum number of characters for:
- Folder names: 64 characters
- File names: 64 characters
- MP3 Tag: 64 characters
- WMA Tag: 64 characters
- WAV Tag: 64 characters
- FLAC Tag: 64 characters
• This unit can recognize a total of 15 000 files, 500 folders (999 files per folder including folder
without unsupported files), and of 8 hierarchies.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
About Android device
• This unit supports Android OS 4.1 and above.
• Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory
(AOA) 2.0.
• If the Android device supports both mass storage class device and AOA 2.0, this unit always
playback via AOA 2.0 as priority.
12
JS_JVC_KW_R520_E_2_F.indd 12
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
5/11/2015 4:44:20 PM
TROUBLESHOOTING
Change the display information
Each time you press
, the display information changes.
• If the information is unavailable or not recorded, “NO TEXT”, “NO NAME”, or other
information (eg. station name) appears.
Frequency
Day/Clock
(For FM Radio Data System stations only)
Station name (PS) Frequency Program type (PTY)
Day/Clock (back to the beginning)
(For CD-DA)
Playing time Day/Clock
(back to the beginning)
Disc name
Track title
(For MP3/WMA/WAV/FLAC files)
Playing time Day/Clock Album title/Artist
Folder/file name (back to the beginning)
ANDROID
Playing time Day/Clock
(back to the beginning)
AUX
AUX
BT AUDIO
BT AUDIO
Album title/Artist
Radio
CD or USB
Radio text+
Remedy
Sound cannot be heard.
Track title
• Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the [SRC SELECT] setting. ( 4)
• Radio reception is poor.
• Static noise while
listening to the radio.
Connect the antenna firmly.
Disc cannot be ejected.
Press and hold to forcibly eject the disc. Be careful not
to drop the disc when it is ejected.
“IN DISC” appears.
Make sure nothing is blocking the loading slot when you
eject the disc.
“PLEASE” and “EJECT”
appear alternately.
Press , then insert the disc correctly.
Playback order is not as
intended.
The playback order is determined by the file name (USB)
or the order in which files were recorded (disc).
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears
and track skips.
Check whether the track is a playable format. ( 12)
Track title
Day/Clock
Available Cyrillic letters
Available characters
Display indications
Day/Clock
CD / USB
FM or AM
Symptom
General
REFERENCES
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.
ENGLISH
JS_JVC_KW_R520_E_1.indd 13
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
13
26/10/2015 2:07:01 PM
SPECIFICATIONS
TROUBLESHOOTING
FM Frequency Range
“CANNOT PLAY” flashes
and/or connected device
cannot be detected.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 12)
• Reattach the device.
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Sound cannot be heard
during playback.
• Sound output only from
the Android device.
• Reconnect the Android device.
• If in [AUDIO MODE], launch any media player
application on the Android device and start playback.
• If in [AUDIO MODE], relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. ( 12)
ANDROID
Cannot playback at [AUTO
MODE].
• Make sure JVC MUSIC PLAY APP is installed on the
Android device. ( 5)
• Reconnect the Android device and select the appropriate
control mode. ( 6)
• If this does not solve the problem, the connected Android
device does not support [AUTO MODE]. ( 12)
“NO DEVICE” or “READING” • Switch off the developer options on the Android device.
keeps flashing.
• Reconnect the Android device.
• If this does not solve the problem, the connected Android
device does not support [AUTO MODE]. ( 12)
Playback is intermittent or
sound skips.
“CANNOT PLAY”
Turn off the power saving mode on the Android device.
• Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
Tuner
Remedy
87.5 MHz — 108.0 MHz (50 kHz step)
Usable Sensitivity (S/N = 26 dB)
0.71 μV/75 Ω
Quieting Sensitivity
(DIN S/N = 46 dB)
2.0 μV/75 Ω
Frequency Response (±3 dB)
30 Hz — 15 kHz
Signal-to-Noise Ratio (MONO)
64 dB
Stereo Separation (1 kHz)
MW Frequency Range
Usable Sensitivity (S/N = 20 dB)
LW Frequency Range
40 dB
531 kHz — 1 611 kHz (9 kHz step)
28.2 μV
153 kHz — 279 kHz (9 kHz step)
Usable Sensitivity (S/N = 20 dB)
CD player
CD / USB
Symptom
50 μV
Laser Diode
GaAIAs
Digital Filter (D/A)
8 times over sampling
Spindle Speed
500 rpm — 200 rpm (CLV)
Wow & Flutter
Below measurable limit
Frequency Response (±1 dB)
20 Hz — 20 kHz
Total Harmonic Distortion (1 kHz)
0.01 %
Signal-to-Noise Ratio (1 kHz)
105 dB
Dynamic Range
90 dB
Channel Separation
85 dB
MP3 Decode
Compliant with MPEG-1/2 Audio Layer-3
WMA Decode
Compliant with Windows Media Audio
If you still have troubles, reset the unit. ( 3)
14
JS_JVC_KW_R520_E_1.indd 14
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
26/10/2015 2:07:02 PM
Audio
Auxiliary USB Standard
USB 1.1, USB 2.0 (Full speed)
Compatible Devices
Mass storage class
File System
FAT12/ 16/ 32
Maximum Supply Current
DC 5 V 1 A
MP3 Decode
Compliant with MPEG-1/2 Audio Layer-3
WMA Decode
Compliant with Windows Media Audio
WAV Decode
Linear-PCM
FLAC Decode
FLAC files
Frequency Response (±3 dB)
20 Hz — 20 kHz
Input Maximum Voltage
1 000 mV
Input Impedance
30 kΩ
Maximum Output Power
50 W × 4 or
50 W × 2 + 50 W × 1 (Subwoofer = 4 Ω)
Full Bandwidth Power
(at less than 1 % THD)
22 W × 4
Speaker Impedance
4 Ω — 8 Ω
Preout Level/Load (CD/USB)
2 500 mV/10 kΩ
Preout Impedance
≤ 600 Ω
General
USB
SPECIFICATIONS
Operating Voltage
(10.5 V — 16 V allowable)
14.4 V
Maximum Current Consumption
10 A
Operating Temperature Range
–10°C — +60°C
Installation Size (W × H × D)
182 mm × 112 mm × 158 mm
Weight
1.6 kg
Subject to change without notice.
ENGLISH
JS_JVC_KW_R520_E_2.indd 15
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
15
29/10/2015 3:48:12 PM
INSTALLATION / CONNECTION
Warning
Installing the unit (in-dash mounting)
• The unit can only be used with a 12 V DC power supply, negative ground.
• Disconnect the battery’s negative terminal before wiring and mounting.
• Do not connect Battery wire (yellow) and Ignition wire (red) to the car
chassis or Ground wire (black) to prevent a short circuit.
• Insulate unconnected wires with vinyl tape to prevent a short circuit.
• Be sure to ground this unit to the car’s chassis again after installation.
Do the required wiring.
( 17)
Bend the appropriate tabs to hold
the mounting sleeve firmly in place.
Caution
• For safety’s sake, leave wiring and mounting to professionals. Consult the
car audio dealer.
• Install this unit in the console of your vehicle. Do not touch the metal
parts of this unit during and shortly after use of the unit. Metal parts such
as the heat sink and enclosure become hot.
• Do not connect the wires of speakers to the car chassis or Ground wire
(black), or connect them in parallel.
• Connect speakers with a maximum power of more than 50 W. If the
maximum power of the speakers is lower than 50 W, change the
[AMP GAIN] setting to avoid damaging the speakers. ( 10)
• Mount the unit at an angle of less than 30º.
• If your vehicle wiring harness does not have the ignition terminal,
connect Ignition wire (red) to the terminal on the vehicle’s fuse box
which provides 12 V DC power supply and is turned on and off by the
ignition key.
• Keep all cables away from heat dissipate metal parts.
• After the unit is installed, check whether the brake lamps, blinkers,
wipers, etc. on the car are working properly.
• If the fuse blows, first make sure the wires are not touching car’s chassis,
then replace the old fuse with one that has the same rating.
Basic procedure
1 Remove the key from the ignition switch, then
disconnect the
Dashboard of your car
When installing without the mounting
sleeve
1 Remove the mounting sleeve and
trim plate from the unit.
2 Align the holes in the unit (on both
sides) with the vehicle mounting
bracket and secure the unit with
screws (supplied).
Use only the specified screws. Using wrong screws
might damage the unit.
How to remove the unit
1 Fit the catch pin on the
extraction keys into the holes on
both sides of the trim plate, then
pull it out.
2 Insert the extraction keys deeply
into the slots on each side, then
follow the arrows as shown
below.
terminal of the car battery.
2 Connect the wires properly.
See Wiring connection. ( 17)
3 Install the unit to your car.
See Installing the unit (in-dash mounting).
4 Connect the terminal of the car battery.
5 Reset the unit. ( 3)
16
JS_JVC_KW_R520_E_1.indd 16
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
26/10/2015 2:07:03 PM
Wiring connection
When connecting to an external
amplifier, connect its ground wire to the
car’s chassis to avoid damaging the unit.
Rear/subwoofer output
Part list for
installation
(A) Trim plate
Fuse (10 A)
Antenna terminal
(B) Mounting sleeve
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
Yellow (Battery wire)
Red (Ignition wire)
Ignition wire
(Red)
A7 (Red)
Vehicle
If no connections are made, do not let the wire
come out from the tab.
Light blue/yellow
To the steering wheel
STEERING
remote control adapter
(Steering remote
WHEEL
REMOTE
control wire)
Unit
Battery wire
(Yellow)
A4 (Yellow)
Default wiring
Red (A7)
Yellow (A4)
* You can also connect a subwoofer speaker directly without
an external subwoofer amplifier. For setting, 10.
If your car does not have an ISO terminal
We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
ISO connectors
Pin
A2
A4
A5
A6
A7
A8
B1
B2
B3
B4
B5
B6
B7
B8
Color and function
Brown
: Mobile phone system
Yellow
: Battery
Blue/White
: Power control
Orange/white
: Car light control switch
Red
: Ignition (ACC)
Black
: Earth (ground) connection
Purple ]
: Rear speaker (right)
Purple/black [
Gray ]
: Front speaker (right)
Gray/black [
White ]
: Front speaker (left)
White/black [
Green ]
: Rear speaker (left) *
Green/black [
(C) Wiring harness
(D) Extraction key
(E) Flat head screw
(M5 × 8 mm)
(F) Round head screw
(M5 × 8 mm)
ENGLISH
JS_JVC_KW_R520_E_2_F.indd 17
Data Size:
Book Size:
B6L (182 mm x 128 mm)
B6L (182 mm x 128 mm)
17
4/11/2015 1:44:05 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising