Cable Testers - ASSMANN WSW components

Cable Testers - ASSMANN WSW components
Cable Tester for Patch Cables and Coaxial Cables
Modular Cable Tester, RJ45 / RJ11 / RJ12
Modular cable tester for cable with RJ45, RJ12, RJ11 and BNC plug. Testet are connection, allocation and
pairs. With Remote Unit for testing of installed cable. Operation with 9V block battery, incl. artificial leather
bag.
•
•
•
•
•
•
•
testfunction for cable with RJ45, RJ12, RJ11, BNC plug
fast testfunction by Auto-Scanning
testet are: connection, allocation, pairs
main device with 2 x RJ45 female, Remote Unit with 1 x RJ45 female
with Remote Unit already installed cable can be tested
LEDs for status display, operation with 9 V block battery
delivery incl. artificial leather bag
ACT-MM
ACT-MN
Modular Tester for Cable with RJ45/12/11 plugs
TwistedPair + Coax Cable Tester, RJ45 and BNC
Premium Network Cable Tester, RJ45, BNC
Totally 18 LEDs (for each wire and for shielding) show the allocation and give a fast and exact test result.
Suitable for CAT5 cable with RJ45 plugs and for BNC Coax cable. With Remote Unit for testing of already
installed cable. Operation with 9V block battery, incl. artificial leather bag.
• testfunction for cable with RJ45/11 UTP/STP and BNC plugs,
PatchPanels and Modular wall plates
• incl. BNC cable adaptor for Coax cable test
• manual or automatical test run
• testet are: connection, allocation, pairs
according to EIA/TIA 356A / 568A / 568B / TokenRing
• main device with 2xRJ45 female, Remote Unit with 1 x RJ45 female
• with Remote Unit already installed cable can be tested
• delivery incl. artificial leather bag and BNC adaptor
ACT-LAN
Premium TwistedPair + Coax Cable Tester
Premium Network Cable Tester, RJ45, BNC
Network cable tester with back-lit LCD display for testing UTP, FTP, STP and RG58 cabling.
•
•
•
•
•
•
•
•
•
back-lit LCD display
2 x RJ45 connectors
Remote Unit with 1 x RJ45 connector
pre-set testing modes for 10(100)Base-T, TokenRing, TP-PMD, AT&T 258A, EIA/TIA-568A/B USOC,
10Base-2 (BNC)
4 additional adjustable user testing modes
tests the covering, parity, flow and insulation
terminator loop-back test: cable measurement with up to 16 Remote Units
automatic cable identification
supplied complete with 2 RJ45 / BNC adaptors, 30cm Patch cable and storage pouch
ACT-LCS-400
ACT-TERM4004
ACT-TERM4008
ACT-TERM4016
Premium Network Cable Tester
Kit, 3 Remote-Modules (ID1-2)
Kit, 4 Remote-Modules (ID5-8)
Kit, 8 Remote-Modules (ID9-16)
Remote Network Cable Tester, RJ45, BNC
Very robust test device for 10 Base2 (BNC), 10 BaseT, 100 BaseTX, IA/IA 356A/ 568A/ 568B and TokenRing
cable. By four LEDs and a graphical LCD display the test status is shown. With Remote Unit for testing of
installed cable. Cable up to max. 150 m can be tested. Operation with 9V block battery.
• testfunction for 10 Base2 (BNC), 10 BaseT, 100 BaseTX,
EIA/TIA 356A/ 568A/ 568B and TokenRing cable
• testet are: connection, allocation, pairs
• main device with 1 x RJ45 and 1 x BNC female
• Remote Unit with 1 x RJ45 and 1 x BNC female ó female
• delivery incl. BNC cable adaptor for Coax cable test (male ó female),
Modular adaptor (female ó female 8P8C), BNC adaptor (female ó female),
Modular cable adaptor (RJ45 ó RJ45) and artificial leather bag
ACT-REM
Remote Network Cable Tester, RJ45 + BNC
23
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising