Device Networking Access Device Networking
Device Networking Access
3G
Industrial M2M Cellular Gateway
■ ■
SE5901A/MB5901A
RoHS-compliant
■ Dual-band UMTS 900/2100 MHz
Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
■ Industrial EMC protection
■ Rugged metal case with wall or DIN-Rail mount
■ 1-port 10/100Mbps Fast Ethernet
■ 2-port USB 2.0 high speed OTG
■ TCP Server/Client, UDP, Virtual COM and Tunneling
modes supported
■ Remotely monitor, manage, and control industrial
field devices
■ Configuration via Web Browser / Serial Console /
Telnet Console / Windows Utility
■ Remote firmware upgrade
Make Serial Devices Ready to the Network
The Indusrial M2M Cellular Gateway SE5901A/MB5901A is a cost
effective gateway for connecting your Ethernet and serial devices over a
cellular TCP/IP network.
By encapsulating serial data and transporting it over Ethernet, SE5901A
offers full-duplex and bi-directional data seamlessly between the serial
port and the Ethernet/Cellular network.
Easy to Use
Flexible configuration options enable this unit to be setup over Ethernet
by Telnet, Web Browser, Serial Console, or our Windows Utility. Packed in
a rugged metal housing for wall or DIN-Rail mount with 9~48VDC wide
range power input, SE5901A/MB5901A is ideal for almost any industrial
and manufacturing automation process.
Atop Virtual COM software provides a virtual environment for applications
when accessing SE5901A/MB5901A through TCP.
Specially Designed for Automation Fields
In industrial and manufacturing automation fields, SE5901A/MB5901A is
used as a field device to connect the Ethernet/Cellular network through
TCP/IP protocol directly. It is also specially designed for conjunction with
PLCs, HMIs, Barcode Scanners, Data Terminals, Electronic Kanbans,
Shop Floor Control Systems, and Pick-to-Light Systems.
Technologies
Indusrial M2M Cellular Gateway
SE5901A/MB5901A
Specification
Cellular Interface
SE5901A SDK P/N:1P1SE5901A0002G
Standard
GSM/GPRS/EDGE/UMTS
Band Options
Dual-band UMTS 900/2100 MHz
Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
Data Rate
EDGE: Max. 236.8Kbps (downlink) / Max. 236.8Kbps (uplink)
GPRS: Max. 85.6Kbps (downlink) / Max. 85.6Kbps (uplink)
CSD: 14.4Kbps
Serial Interface
Connector
D-Sub9 RS-232/485 (2-wire) software selectable
5.08mm TB5 RS-232/485 (2-wire) software selectable (TB models)
Ports
1 Port
Baud Rate
110 ~ 921.6Kbps
Data Bits
5,6,7,8
Stop Bits
1,2
Flow Control
None, Xon/Xoff, RTS/CTS
USB Interface
Speed
USB 2.0
Connector
USB A Type *1 / USB A Type with postive lock *1
DI/DO Interface (Optional)
DI
2 channels photo coupler isolated digital input
DO
2 channels relay output. Selectable N.O./N.C. (1A@120VAC/2A@24VDC)
Power Characteristics
Input Voltage
9 - 48VDC
Input Current(9VDC)
0.6A
Power Consumption
Approx. 7.2W (max)
Reverse Polarity Protection
Yes
Connector
5.08mm 3-pin Lockable Terminal Block
USB Power Backup
DC 5V Power Input
Mechanicals
Dimensions(W x H x D)
32 mm x 92 mm x 122mm
Installation
DIN Rail, Wall Mount (optional)
Reset Button
Yes
Weight
400g
Environmental Limits
Operating Temperature
-40º ~ 70ºC ( -40º ~ 158ºF )
Storage Temperature
-40º ~ 85ºC ( -40º ~ 185ºF )
Ambient Relative Humidity
5~95% RH, (non-condensing)
Software
Protocols
IPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP,NTP,SMTP,Modbus TCP,
Modbus ASCII/RTU
Configuration
Serial Manager, Web UI, Telnet
Virtual COM
Windows / Linux redirection software
Link Modes
TCP Server
4 connections, Virtual COM, or Reverse Telnet
TCP Client
Single destination or Virtual COM
UDP
Up to 4 ranges of IPs
Warranty
5 years
Ordering Information
SE5901A
P/N:1P1SE5901A0001G
1-port RS-232/485 Industrial Serial Device Server, DB9
SE5901A SDK
P/N:1P1SE5901A0002G
1-port RS-232/485 Industrial Serial Device Server, DB9
SE5901A-3G
P/N:1P1SE5901A3G01G
1-port RS-232/485 Industrial Cellular Serial Gateway, DB9
SE5901A-3G SDK
P/N:1P1SE5901A3G02G
1-port RS-232/485 Industrial Cellular Serial Gateway, DB9
SE5901A-IO SDK
P/N:1P1SE5901AIO01G
1-port RS-232/485 Industrial Serial Device Server, TB14
SE5901A-IO-3G SDK
P/N:1P1SE5901AIO02G
1-port RS-232/485 Industrial Modbus Gateway, TB14
MB5901A
P/N:1P1MB5901A0001G
1-port RS-232/485 Industrial Modbus Gateway, DB9
MB5901A-3G
P/N:1P1MB5901A3G01G
1-port RS-232/485 Industrial Cellular Modbus Gateway, DB9
MB5901A-IO
P/N:1P1MB5901AIO01G
1-port RS-232/485 Industrial Cellular Serial Gateway, TB14
MB5901A-IO-3G
P/N:1P1MB5901AIO02G
1-port RS-232/485 Industrial Cellular Modbus Gateway, TB14
Optional Accessories
US315-12 (US-Y) Power Adapter
P/N:50500151120009G
Y-Type (5.08 mm) power adaptor,100-240VAC input, 1.25A @ 12VDC output, US plug
USE315-12 (EU-Y) Power Adapter
P/N:50500151120019G
Y-Type (5.08 mm) power adaptor,100-240VAC input, 1.25A @ 12VDC output, EU plug
ADP-DB9(F)-TB5
P/N:59906231G
Female DB9 to Female 3.81 TB5 Converter
WMK-315-Black
P/N:70100000000050G
Black Aluminum Wall Mount Kit
WL-7200-V1 WLAN 11n Dongle
P/N:59908002G
802.11b/g/n300M , USB Dongl
Atop Technologies, Inc.
TEL:+886-3-5508137
FAX:+886-3-5508131
sales@atop.com.tw
http://www.atop.com.tw
Design and specification are subjected to change without notice.
All product names referenced herein are registered trademarks of their respective companies.
DM_SE901A/MB5901A_E:v2-141013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising