36331 Battery pack for NA
INSTALL THE BATTERY PACK INTO THE HOUSING
Instruction Manual for
Battery Pack for NA-A6500 Housing
PN# 36331
FOREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognize the requirements
of professional as well as amateur underwater photographers and fulfill them
through the innovative designs of our products. We strive to achieve a high
level of user-friendliness by allowing stress-free installation and easy
operation of all important functions of the camera.
Please read this manual carefully before using the product, this will maximize
its performance as well as its lifetime.
Connect the micro USB cable to the battery pack and slide into the slot at the
bottom of the housing as shown.
WARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for consumer
use. This warranty only applies to products purchased from authorized
NAUTICAM dealers and does not extend beyond the original retail purchaser.
To return your product for service, please contact your regional authorized
service center(s). Please note that this warranty only applies when the product
is purchased in the territory where the service center is located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the inability
to capture images even if it is due to the malfunctioning of our products.
Unauthorized modifications and/or repairs of our products will automatically
invalidate the warranty.
PRECAUTIONS
•
•
•
•
Do not store the product in an environment of high humidity.
Do not leave the product in direct sunlight for prolonged periods.
Keep out of reach of children, failure to do so could result in injury.
Defective products should be shipped to our distributors for service,
unauthorized disassembling and/or modifications could result in malfunction.
Plug the micro USB cable into the camera’s micro UCB port.
PACKAGE CONTENTS
•
• 2500mAh Battery Pack
• Micro USB cable
SPECIFICATIONS
Dimensions:
Weight:
Capacity:
Input:
Output:
Type:
Life Cycle:
Recharge time:
92mm x 58mm x 6.5mm
Approx. 70g
2500mAh
DC 5V / 1A
DC 5V / 1.5A
Polymer Lithium-Ion Battery
Recharge 500 times
Approx. 2.5hrs
Confirm that the battery pack is active and charging the camera before closing
the housing. The battery level icon in the camera will charge to a socket icon
when external battery is connected.
IDENTIFICATION OF PARTS
Battery Level Indicator
Flashing while charging
Power Input Socket
Type: Micro USB
Input: 5V/1A
Tips:
It is suggested to always check if the battery pack is active before going into
water. The battery pack will be inactive once the camera battery is fully
charged. Re-plug in the micro USB cable is required to re-activate the battery
pack.
Power Output Socket
Type: USB
Output: 5V/1.5A (max.)
Current as of 2017-02-09
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising