MBP5630 - Magnavox
Owner’s Manual
ES INSTRUCCIONES SIMPLIFICADAS
INCLUIDOS EN ESPANOL.
MBP5630
Blu-ray Disc™ / DVD Player
© 2016 Funai Electric Co., Ltd.
CONTENTS
INTRODUCTION .............................................. 3
NETWORK FEATURES .................................. 37
Safety Instructions ............................................................................................3
Supplied Accessories ......................................................................................4
Before Using Network Features........................................................... 37
Information on Network Services ...................................................... 37
FEATURES .......................................................... 5
LIST OF SETTINGS ........................................ 38
Features .................................................................................................................5
System Information .........................................................................................7
Symbols Used in this Owner’s Manual ................................................7
SETUPS............................................................. 41
Network Connection ................................................................................. 41
fun-Link (HDMI CEC) ................................................................................ 48
HDMI Video Resolution ............................................................................ 49
Parental ............................................................................................................... 51
Software Update ........................................................................................... 53
Restore Default Settings ........................................................................... 55
FUNCTIONAL OVERVIEW ............................. 8
Front Panel ...........................................................................................................8
Rear Panel.............................................................................................................8
Remote Control ...............................................................................................9
Guide to On-Screen Display .................................................................. 11
TROUBLESHOOTING ................................... 56
CONNECTIONS.............................................. 12
SPECIFICATIONS ........................................... 60
Connection to a TV ..................................................................................... 12
Connection to an Audio System .......................................................... 13
HDMI Audio Output .................................................................................. 14
Connection to the Network .................................................................. 15
NETWORK SERVICE DISCLAIMER ............. 61
MAINTENANCE .............................................. 62
BEFORE YOU START ...................................... 17
TRADEMARK INFORMATION ...................... 63
Finding a Viewing HDMI Input on Your TV ..................................... 17
Initial Setup........................................................................................................ 17
GLOSSARY ....................................................... 65
LIMITED WARRANTY .................................... 68
INFORMATION ON PLAYBACK .................. 19
ESPAÑOL ......................................................... 69
Information on Playback............................................................................ 19
Guide to File List ........................................................................................... 22
How to Insert a Disc .................................................................................. 23
Mando a Distancia ........................................................................................ 69
Encontrar el HDMI en su Televisor ..................................................... 70
Instalacion Inicial ............................................................................................. 71
Garantía Limitada ........................................................................back cover
BASIC PLAYBACK .......................................... 24
Playing Back a Disc ....................................................................................... 24
Playing Back Contents from a USB Memory Stick .................... 25
Using the Title / Disc / Pop Menu ....................................................... 26
SPECIAL PLAYBACK ...................................... 27
Fast Forward / Fast Reverse.................................................................... 27
Slow Forward Playback .............................................................................. 27
Step by Step Playback................................................................................. 27
Repeat Playback ............................................................................................. 28
Shuffle / Random Playback....................................................................... 28
Slide Show ......................................................................................................... 29
PiP (BONUSVIEW™) Setting ............................................................... 30
Enjoying BD-Live™ Discs Using Internet ........................................ 30
T itle / Chapter Search ............................................................................... 31
Track / File Search ......................................................................................... 31
T ime Search ..................................................................................................... 32
Number Select Search ............................................................................... 32
Switching Subtitles ........................................................................................ 33
Switching Audio Soundtrack ................................................................... 34
Switching Camera Angles ......................................................................... 35
Noise Reduction ............................................................................................ 35
Closed Caption .............................................................................................. 36
2
Register Online at www.magnavox.com/support/ today to get the most benefits from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits such as software upgrades and
important product notifications. Register Online at www.magnavox.com/support/
1. INTRODUCTION
1.1.
Safety Instructions
See “Setup Manual” for more details of Safety Instructions.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC Power cord with wet hands.
• Do not pull on the AC Power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of picture and/or sound may be generated if the unit is placed too close
to them. In this case, please ensure enough space between external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC Power cord from the outlet before moving the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours until its
inside gets dry.
– The unit is moved from a cold place to a warm place.
– Under conditions of high humidity.
– After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with
your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations
concerning chemical wastes.
• For product recycling information, please visit - www.magnavox.com/support/
Click on
EN
3
1.2.
Supplied Accessories
• Remote Control (NC451UH)
• Setup Manual
MAGNAVOX is a registered trademark of Philips North America Corporation and is used by Funai Electric Co., Ltd. and Funai
Corporation, Inc. under license from Philips North America.
© 2016 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored
in any storage medium, in any form or for any purpose without the express prior written consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the
obligation to notify any person or organization of such changes.
EN
4
2. FEATURES
2.1.
Features
Blu-ray Disc™
You can enjoy Blu-ray Disc™ which is capable of storing five
times more data than a conventional DVD.
BD-Live™
BD-Live™ (BD-ROM version 2 Profile 2.0) that allows
interactive functions to be used when this unit is connected to
the Internet in addition to the BONUSVIEW™ function. The
various functions differ depending on the disc.
BD-Java
With some Blu-ray™ discs which contain Java applications, you
can enjoy interactive functions such as games or interactive
menus.
Pop Menu
Some BD-Videos have a Pop Menu which is a navigation menu
that can be called up and be operated on the TV screen
without interrupting playback. You can call up the Pop Menu
by pressing [POP MENU/MENU]. Contents in the Pop
Menu vary depending on the disc.
DVD upscaling for enhanced picture quality
Your current DVD will look even better than before thanks
to video upscaling. Upscaling will increase the resolution of
standard definition DVD to high definition up to 1080p over
an HDMI connection. The picture will be less jagged and more
realistic for a near high definition experience.
HDMI 1080p/24 output (Blu-ray Disc™ only)
This unit is equipped with the feature which can provide
smooth movement during playback of film originated material
with a frame rate of 24 frames per second with progressive.
(Available only when the display device is connected with an
HDMI cable.) Refer to “HDMI Video Resolution” on page
49.
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD and USB Memory
Stick ensures that you can continue to enjoy your current
audio-video collection. Additionally, you can enjoy AVCHD
(for DVD-RW/-R only) / Photo files / Music files.
Playing back contents from a USB Memory Stick
You can play back Photo files / Music files stored on a USB
Memory Stick. BD-ROM discs sometimes store picturein-picture commentary, Subtitles or other extras on a USB
Memory Stick for use during playback with the BD-Video.
Listen to rich multi-channel surround sound
Multi-channel surround sound, which realizes real-to-life sound
and makes you feel that you are really there.
Easy and simple connection to your HDTV via HDMI
Connect this unit to your HDTV with one single HDMI (HighDefinition Multimedia Interface) cable. It is recommended to
use a High Speed HDMI cable for better compatibility. The
high definition video output signal will be transferred to your
HDTV without conversion to analog signals, so you will get
excellent picture and sound quality, completely free from
noise.
Playing back AVCHD files
This unit supports playback of AVCHD format files (new
format for high definition video camcorders) recorded on a
disc / SD Memory Card using USB Card Reader. Your high
definition personal archive is playable in HD quality.
x.v.Color
This unit supports playback of video contents on discs
recorded with “x.v.Color” technology. To watch this video
content with the “x.v.Color” space, a TV or other display
device supporting both video image reproduction using
“x.v.Color” standard and capability of manual switching of its
color space setting is required. Please refer to the User Manual
of your display device for further information.
fun-Link (HDMI CEC)
This unit supports HDMI CEC, which allows integrated system
control over an HDMI cable and is part of the HDMI standard.
This function may not work properly on some devices.
PiP (BONUSVIEW™)
Some BD-Videos have the PiP function which enables you to
display the Secondary Video in the Primary Video. You can call
up the Secondary Video by pressing [MODE] whenever the
scene contains a Secondary Video.
continued on next page
EN
5
Netflix
With this unit, you can enjoy movies and TV episodes
streamed instantly from Netflix via the Internet.
In order to use this feature, you must visit
www.netflix.com/ on your PC and become a Netflix member.
VUDU
This unit supports VUDU which is the leading HD on-demand
video service.
With VUDU, you can also enjoy movies and TV episodes.
In order to use this feature, you must visit www.vudu.com
YouTube™
This unit enables you to access YouTube™.
On your TV screen, you can enjoy a large number of video
clips streamed from YouTube™.
Digital Rights Management
This product contains technology subject to certain intellectual
property rights of Microsoft.
Use or distribution of this technology outside of this product is
prohibited without the appropriate license(s) from Microsoft.
EN
6
2.2.
System Information
“System Information” screen provides information about this unit’s Software Version.
You can also download the latest software from the Magnavox website and update it yourself if it is newer than the version
currently on your unit. The current version of software on your unit can be seen on the “System Information” screen.
To access “System Information”, follow the procedure below.
1. Press [HOME].
2. Use [
3. Use [
2.3.
] to select “Setup”, then press [OK].
] to select “
”.
Symbols Used in this Owner’s Manual
To specify which media type each function is applicable to, a combination of the symbols shown below will be depicted next to
that function's explanation.
Symbol
BD
[BD Video]
VIDEO
[DVD Video]
DVD
Description
Description refers to BD-Video
VIDEO
Description refers to DVD-Video
CD
Description refers to Audio CD / DTS-CD
[CD]
[AVCHD]
AVCHD
Description refers to DVD-RW/-R with AVCHD files
PHOTO
[JPEG]
FILE
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and USB Memory Stick with Photo files.
MUSIC
[MUSIC
FILE
Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and USB Memory Stick with Music files.
If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media types.
EN
7
3. FUNCTIONAL OVERVIEW
3.1.
Front Panel
1
2
3* 4* 5* 6
7
* The unit can also be turned On by pressing this button.
1. Disc tray
5.
2. Infrared sensor window
6. Power-On indicator
3.
4.
(OPEN/CLOSE) button*
(POWER/Standby) button*
7. USB Input
(PLAY/PAUSE) button*
• Press to start playback.
• During playback, press to pause playback.
C Caution
• Do not connect any device other than USB Memory Stick or USB Card Reader into the USB Input. (e.g. PC, external HDD, digital
camera, keyboard, mouse, USB-Hub, etc.)
• When connecting a USB Memory Stick, connect it directly to the USB Input. Do not use a USB extension cable.
D Note
• Due to new ENERGY STAR® requirements, this unit will automatically turn on the screen saver after 5 minutes of inactivity and
enter standby mode after 25 minutes of inactivity.
3.2.
Rear Panel
1
2
3
1. AC Power cord
2. LAN terminal
3. HDMI OUT jack
C Caution
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
• This unit does not have a TV RF modulator.
EN
8
3.3.
Remote Control
7.
1
10*
11
2
12
8. SUBTITLE
• Press to select Subtitles on a disc.
13
3
4
5
6*
7
8
9
(SKIP BACK/DOWN)
• During playback, press once to return to the beginning of
the current Title, Chapter, Track or File.
• During playback, press twice to return to the previous
Title, Chapter, Track or File.
• During Photo playback, press to return to the previous
File.
9. AUDIO
• Press to select the Audio Channel (such as audio
languages) on a disc.
10.
14
(OPEN/CLOSE)
• Press to Open or Close the disc tray.
15
11. HOME
• Press to display the Home Menu.
16
17
18
12. POP MENU/MENU
Blu-ray Disc™: Press to display the Pop Menu.
DVD: Press to display the Disc Menu.
19*
14. RETURN
• Press to Return to the previously displayed menu or
screen function.
13. OK
• Press to confirm or select menu items.
15. RED/GREEN/BLUE/YELLOW
• Press to activate shortcut Keys on some
BD-Video functions.
16.
(FORWARD)
• During playback, press to Fast Forward the playback.
• When playback is in pause, press to Slow Forward the
playback.
17.
(STOP)
• Press to Stop playback.
18.
(SKIP FORWARD/UP)
• During playback, press to Skip to the next Chapter, Track
or File.
• When playback is in pause mode, press to Forward the
Playback Picture by Picture.
* The unit can also be turned on by pressing these buttons.
1. y(POWER/Standby)
• Press to Turn On the unit, or to switch the unit into
Standby mode. (To completely Turn Off the unit, you must
unplug the AC Power cord.)
2. TOP MENU
Blu-ray Disc™: Press to display the Top Menu.
DVD: Press to display the Title Menu.
3.
19. YouTube/NETFLIX/VUDU
• Press to Launch VOD (Video On Demand).
(CURSOR)
• Press to select items or settings.
4. MODE
• During playback, press to display the Play Menu to configure
playback functions such as Search, Repeat, Angle, etc.
5.
(REVERSE)
• During playback, press to Fast Reverse the playback.
6. BF (PLAY/PAUSE)
• Press to start playback.
• Press to Pause playback.
continued on next page
EN
9
C Using the Remote Control
D Note
• Use the supplied Remote Control. Remote-control operation
on any other Remote Control, such as a universal Remote
Control, is not guaranteed.
Remote Control Usage Guidelines:
• Make sure that there are no obstacles between the Remote
Control and the infrared sensor window on the unit.
• Remote operation may become unreliable if strong sunlight
or fluorescent light is shining on the infrared sensor window
of the unit.
• Remote Controls of different devices can interfere with each
other. Avoid using a Remote Control from another device
which is located close to the unit.
• Replace the batteries when you notice a fall-off in the
operating range of the Remote Control.
• The maximum operable ranges from the unit are as follows.
C Installing the Batteries in the Remote Control
Install 2 AAA (1.5V) batteries matching the polarity indicated
inside battery compartment of the Remote Control.
1
2
3
– Line of sight:
approx. 23 feet (7 m)
– Either side of the center:
approx. 16 feet (5 m) within 30°
– Above:
approx. 16 feet (5 m) within 15°
C Caution
Incorrect use of batteries can result in hazards such as leakage
and bursting. Please follow the guidelines below:
• Lithium or ni-cad and ni-mh rechargeable batteries are not
recommended to use for Remote Control.
• Do not mix different types of batteries such as alkaline and
standard (carbon-zinc).
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together. Although
they may look similar, different batteries may have different
voltages.
• Make sure that the + and - ends of each battery match the
indications in the battery compartment.
• Remove batteries from battery compartment, when the
remote is not going to be used for a month or more.
• When disposing of used batteries, please comply with
governmental regulations or environmental public rules that
apply in your country or area.
• Do not recharge, short-circuit, heat, burn or disassemble
batteries.
EN
– Below:
approx. 10 feet (3 m) within 30°
30˚
16 feet (5 m)
10
30˚
23 feet (7 m)
16 feet (5 m)
3.4.
Guide to On-Screen Display
C Home Menu
When you Turn On the unit, Home Menu will appear automatically. Otherwise, press [HOME].
1
3
2
Disc
Disc
Netflix
4
USB
USB
Setup
Setup
VUDU
YouTube
6
5
1. “Disc”:
Initiates playback of inserted disc, displays a list of Tracks / Files.
2. “USB”:
Displays a list of Tracks / Files on the connected USB Memory Stick.
3. “Setup”:
To access the Setup Menu.
4. “Netflix” :
Access directly to Netflix.
5. “VUDU” :
Access directly to VUDU.
6. “YouTube” : Access directly to YouTube™.
C Setup Menu
Setup
1
Network
Interface
Ethernet
Language
Wireless Setting
Scan
Streaming Co...
Network Status
More...
Security
Connection Test
More...
System
IP Setting
Auto
2
1. Category
2. Menus / Options: Displays options for the highlighted item on the left whenever available
C Play Menu
During playback, press [MODE] to display the Play Menu.
e.g.) Blu-ray Disc™
BDMV
Display
Search
Audio
Subtitle
Subtitle Style
Repeat
EN
11
4. CONNECTIONS
4.1.
Connection to a TV
C HDMI Connection (Supports up to 1080i(*1), 1080p(*2), 1080p/24(*3) resolution.)
Your TV
HDMI cable
(not supplied)
HDMI OUT
HDMI IN
.
(*1) 1080i:
(*2) 1080p:
(*3) 1080p/24:
Outputs video data with a frame rate of 30 frames per second.
Outputs video data with a frame rate of 60 frames per second.
Outputs video data with a frame rate of 24 frames per second. To enable 1080p/24 output, set “Resolution” to
“Auto” or “1080p”, and set “HDMI1080p 24Hz” to “On”.
• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are
matched.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also known as
HDMI category 2 cable) is recommended for better compatibility.
D Note
• If the TV receives no Audio / Video signal after properly connecting the unit and the TV with an HDMI cable, it may be the TV.
Please refer to the TV’s user’s manual.
• If the TV receives no Audio signal after properly connecting the unit and the TV with an HDMI cable, make sure the TV input is not
an HDMI-DVI Input terminal.
EN
12
4.2.
Connection to an Audio System
• When you change the connections, all devices should be Turned Off.
• When connecting the unit to an external audio system, refer to the User Manual for Setup / Configuration help.
C HDMI Audio Connection
AV receiver/amplifier with an
HDMI input jack
HDMI IN
HDMI cable
(not supplied)
HDMI OUT
Your TV
HDMI OUT
HDMI cable
(not supplied)
HDMI IN
EN
13
4.3.
HDMI Audio Output
“HDMI” > “HDMI” setting
A
Bitstream
PCM
Re-encode
Dolby Digital
Dolby Digital
Multi LPCM
Dolby Digital
Dolby Digital Plus
Dolby Digital Plus
Multi LPCM
Dolby Digital Plus(*1)
Dolby TureHD
Dolby TrueHD
Multi LPCM
Dolby TrueHD(*1)
DTS
DTS
2ch PCM
DTS
DTS-HD
High Resolution
DTS-HD
High Resolution
2ch PCM(*2)
DTS-HD
High Resolution(*3)
DTS-HD
Master Audio
DTS-HD
Master Audio
2ch PCM(*2)
DTS-HD
Master Audio(*3)
LPCM
Multi LPCM
Multi LPCM
Multi LPCM(*1)
Dolby Digital
Dolby Digital
Multi LPCM
Dolby Digital
DTS
DTS
2ch PCM
DTS
MPEG
Multi LPCM
Multi LPCM
Multi LPCM
PCM
Multi LPCM
Multi LPCM
Multi LPCM
Audio CD
LPCM
2ch PCM
2ch PCM
2ch PCM
DTS-CD
DTS
DTS
2ch PCM
DTS
AVCHD
Dolby Digital
Dolby Digital
Multi LPCM
Dolby Digital
LPCM
Multi PCM
Multi PCM
Multi PCM
MP3/FLAC
2ch PCM
2ch PCM
2ch PCM
AAC
AAC(*4)
2ch PCM
AAC(*4)
Dolby Digital Plus
Dolby Digital Plus
Multi LPCM
Dolby Digital Plus
HE-AAC
AAC
2ch PCM
AAC
Dolby Digital
Dolby Digital
Multi PCM
Dolby Digital
Dolby Digital Plus
Dolby Digital Plus
Multi LPCM
Dolby Digital Plus
HE-AAC
AAC
2ch PCM
AAC
MP3
2ch PCM
2ch PCM
2ch PCM
HE-AAC
AAC
2ch PCM
AAC
Media
Source
BD
DVD
Audio File
Netflix
VUDU
YouTube™
*1)
*2)
*3)
*4)
If there is Secondary Audio or Interactive Audio, it will be output in Dolby Digital.
Only the Core Substream is decoded.
If there is Secondary Audio or Interactive Audio, it will be output in DTS.
AAC Raw only supports the source with sample rate between 32kHz and 48kHz.
D Note
• If the connected device is not compatible with HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel down-mixed
LPCM depending on the capability of the connected device even if you select “Bitstream” in “HDMI” setting.
• If “HDMI” is set to “Bitstream” and this unit is connected to a Bitstream compatible device, only Primary Audio of the BD-Video
will be output. (Secondary Audio and Button Sounds will not be output.)
EN
14
4.4.
Connection to the Network
By connecting this unit to the Internet, you can update Software via the Internet, access BD-Live™ and other Network Services
such as Netflix, VUDU and YouTube™.
– Software Update: For more information, refer to “Network Update” on page 54.
– BD-Live™: For more information, refer to “Enjoying BD-Live™ Discs Using Internet” on page 30.
– Netflix / VUDU / YouTube™ : For more information, refer to “Information on Network Services” on page 37
D Note
• A wired connection is the preferred method of connecting this unit to the Internet, especially while performing a Software update
of this unit via the Internet. It also provides a more stable connection while streaming HD video versus Wireless LAN. Wireless
LAN performance could be unstable if there are other devices near this unit which also operate in the same frequency spectrum.
C Wired Connection
Nerwork equipment
(Modem, etc.)
Broadband Router or
Hub
WAN
LAN
LAN
5
4
3
2
1
Ethernet cable
(not supplied)
Ethernet cable
(not supplied)
Internet
C Caution
• Do not insert any cable other than an Ethernet cable to the LAN terminal to avoid damaging the unit.
• Do not connect your PC directly to the LAN terminal of this unit.
D Note
• When you connect an Ethernet cable from a Router with Internet access to this unit, it will automatically configure Network
settings. (You do not need to manually configure Network settings unless particular settings are required.) However, when
switching from Wireless to Wired, you need to select “Ethernet” in the Setup.
• If your modem does not have Router functions, connect a wired Router.
• If your modem has Router functions but there is no vacant port, add a Switch / Hub.
• Please purchase shielded Ethernet cables at your local store and use them when you connect to Network equipment.
continued on next page
EN
15
C Wireless Connection
Internet
LAN
WAN
Wireless Router
Ethernet cable
(not supplied)
D Note
• If using the Wireless Connection, refer to “Wireless Connection” on page 44 to configure Network settings.
• For a Wireless Router, use a Router that supports IEEE 802.11 b/g/n specifications.
(“n” is preferred type for a faster stable operation of the Wireless Network.)
• Our player supports infrastructure mode when using a Wireless Router. This unit does not support ad-hoc mode.
• Other radio devices or obstacles may cause interference to the Wireless Network Connection.
• If you are experiencing signal issues with your Wireless Connection, please confirm that your Wireless Router is placed close
enough to the unit.
EN
16
5. BEFORE YOU START
5.1.
Finding a Viewing HDMI Input on Your TV
After you have completed all of the connections to your TV, review the steps below.
1. Press [y(POWER/Standby)] to Turn On the unit.
2. Turn On your TV.
3. Switch your TV's input to the HDMI port which your unit is connected to.
This is the correct HDMI Input view.
• It may take a few moments for the Menu screen to appear.
• When this unit is turned On for the first time, the “Initial Setup” screen will appear.
5.2.
Initial Setup
Please follow the instructions below to complete the initial Setup.
1. While Welcome screen is displayed, press [OK].
] to select your Language, then press [OK].
2. Language Setup screen will appear. Use [
Page: 2/4
Language Setting
Easy Setup
English
Français
Choose OSD language for all OSD windows,
menu, etc...
Previous
Español
Next
3. The fun-Link (HDMI CEC) Setup screen will appear. Use [
4. Network Setup screen will appear. Use [
] to select “On” or “Off ”, then press [OK].
] to select “Set up now” or “Not now”, then press [OK].
• If you select “Set up now”, refer to “Network Connection” on page 41 for further operation.
• If you select “Not now”, the Home Menu screen will appear.
continued on next page
EN
17
C How to Reset the OSD Language
You can reset the OSD Language if you selected the wrong Language.
1. Press [HOME] to display the Home Menu.
2. Use [
] to select “
”, then press [OK].
• This item is “Setup” (English) / “Instalación” (Spanish) / “Installation” (French).
• From here on, please select one of the following items you can find on screen:
3. Use [
] to select “
4. Use [
] to select “Language” (English) / “Idioma” (Spanish) / “Langue” (French), then press [OK].
5. Use [
] to select “OSD”(English) / “OSD”(Spanish) / “Affichage sur l’écran”(French), then press [OK].
6. Use [
] to select your desired Language, then press [OK].
”, then press [OK].
7. If the items that were set are displayed in your desired Language, then press [HOME] to exit.
EN
18
6. INFORMATION ON PLAYBACK
6.1.
Information on Playback
C Playable Discs and Files
Playable discs
Logos
Blu-ray Disc™
- BD-Video
- BD-RE* (ver. 2.1)
(Recorded in BDMV format)
- BD-R* (ver. 1.1 / 1.2 / 1.3)
(Recorded in BDMV format)
(Unfinalized disc may not be played back.)
DVD-Video
DVD-RW
(finalized video mode discs only)
DVD-R
(finalized video mode discs only)
CD-DA (Audio CD)
CD-RW
CD-R
DTS-CD
-
(*) Due to the intentional progression of the Blu-ray Disc™ format by its standard setting authority, the company cannot
guarantee or warrant the playability of future extensions of the Blu-ray Disc™ format with this product.
Playable files
AVCHD
Media
DVD-RW/-R
SD Memory Card using USB Card Reader
BD-RE/-R
DVD-RW/-R
CD-RW/-R
USB Memory Stick
JPEG / PNG / MP3 /
FLAC / AAC
Readable device
USB Memory Stick
Playable Files / Data
Photo files, Music files, Picture-in-Picture commentary, Subtitles or other extras for some BD-ROM.
D Note
• This unit may not be able to play back discs recorded on PC’s or other recorders.
continued on next page
EN
19
C Recommended Specifications
AVCHD
This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t) written to a DVD or copied to an SD Memory Card.
The DVD or SD Memory Card containing AVCHD files must have a proper file and folder structure meeting AVCHD format
specifications. Please use AVCHD compliant Device / Software to burn or copy AVCHD files to DVD or SD Memory Card.
(Please refer to User Manuals of your Device / Software for more information.)
Music file
Photo file
MP3 (.mp3)
JPEG(.jpg/.jpeg)
Sampling frequency: up to 48kHz
Bit rate:
up to 320kbps
PNG(.png)
AAC (.aac)
Sampling frequency: up to 98kHz
Bit rate:
up to 320kbps
FLAC (.flac)
Sampling frequency: up to 192kHz
Number of bits:
8/12/16/20/24bit
D Note
• Regardless of the file type, some files may be unplayable due to their incompatible file structure.
Caution / Note for USB Memory Stick
C Caution
• Do not try to open or modify the USB Memory Stick.
• Do not touch the terminal surface with your fingers or any metals.
D Note
• This unit supports USB Memory Stick with FAT16 / FAT32 file system.
• This unit does not support NTFS file system.
• Please keep the USB Memory Sticks in their cases when you are not using them.
• Some USB Memory Sticks may not work with this unit.
• This unit can read SD Memory Cards using a USB Card Reader.
– Readable cards:
SD Memory Card (8 MB - 2 GB)
miniSD Memory Card (16 MB - 2 GB)
microSD Memory Card (256 MB - 2 GB)
SDHC Memory Card (4 GB - 32 GB)
miniSDHC Memory Card (4 GB - 8 GB)
microSDHC Memory Card (4 GB - 16 GB)
– Readable files:
AVCHD / JPEG / PNG / MP3 / FLAC / AAC
• Depending on a USB Card Reader, connected card or device may not be recognized.
continued on next page
EN
20
C Unplayable Media and Files
The following discs will not be played back on this unit.
•
•
•
•
•
•
•
•
•
•
•
•
•
CD-ROM
• CD-I (compact disc-interactive)
DVD-RAM
• VSD (video single disc)
DVD-audio
• video CD
HD DVD
• SVCD
SDXC Memory Card
• microSDXC Memory Card
unfinalized disc
• BD-RE (ver. 1.0)
BD-RE (ver. 2.1) (Recorded in BDAV format)
• BD-R (ver. 1.1 / 1.2 / 1.3) (Recorded in BDAV format)
BDXL™
Blu-ray Disc™ / DVD / CD / USB Memory Stick / SD Memory Card containing DivX® files
Blu-ray Disc™ / USB Memory Stick that contains AVCHD files
Blu-ray Disc™ / DVD hybrid disc (played back as a BD-Video only)
DVD-RW/-R recorded in non compatible recording format
Super Audio CD - Only the sound on the CD layer can be heard. The sound on the high-density Super Audio CD layer cannot be
heard.
• Playability of dual discs is not guaranteed.
• This unit cannot play back the disc contents protected by Windows Media™ Digital Rights Management (DRM).
C Region Codes
This unit has been designed to play back BD-Video with Region “A” and DVD-Video with Region “1” or
“ALL”. You cannot play back BD-Video or DVD-Video that is labeled for other Regions.
Look for the symbols on your BD-Video or DVD-Video. If these Region symbols do not appear on your
BD-Video or DVD-Video, you cannot play back the disc on this unit. The letter or number inside the
globe refers to Region of the world. BD-Video or DVD-Video discs labeled for a specific Region can
only be played back on players with the same Region Code.
BD-Video
DVD-Video
C Hint for Disc Playback
The contents of a disc are generally divided into sections or folders (group of titles / files) as shown below.
BD-Video, DVD-Video, AVCHD
Title 1
Chapter 1 Chapter 2
Track 1
Track 2
Title 2
Chapter 1 Chapter 2
Audio CD
Track 3
Chapter 3
Track 4
Track 5
Folder 2
File 4
File 5
Photo / Music
Folder 1
File 1
File 2
File 3
continued on next page
EN
21
C Description for Icons
[
] : Folder icon
[
] : Music File icon
[
] : Photo File icon
– “Folders” refers to the group of Files.
– “Track” refers to the contents recorded on the Audio CD.
– “Files” refers to the contents on a disc which are recorded in AVCHD or JPEG / PNG / MP3 / FLAC / AAC file format.
D Note
• Unrecognizable characters will not be displayed.
6.2.
Guide to File List
C Photo File List
1
Item 03/54
..
Photo_data01
Photo_data02
PICTURE0001
PICTURE0002
PICTURE0003
PICTURE0004
2
5
Type : JPG
Size : 1.16M
Resolution : 3264x2448
Exit
4
3
1. Number of Folders or Files in this directory / Total
number of Folders or Files in this directory
4. File information
5. Thumbnail
2. Folder
3. File List
C Music File List
1
Item 03/54
2
..
Music_data01
Music_data02
MUSIC001
MUSIC002
MUSIC003
MUSIC004
5
Type : MP3
Total Time : 04:23
Title : music
Exit
3
4
1. Number of Folders or Files in this Directory /
Total number of Folders or Files in this Directory
4. Track information
5. Cover Art (when available)
2. Folder
3. File List
C How to Navigate through the File List
• Use [
] to move the Highlighted text up and down. Press [ ] to go back to the previous hierarchy.
• If the List has multiple pages, you can switch pages using [
(SKIP BACK/DOWN) /
(SKIP
FORWARD/UP)].
• To access Files in a Folder, select the desired folder, then press [OK].
• Press [HOME] to Exit.
D Note
• When selecting a Photo/Music folder, all Folders in the Disc/USB Memory Stick will be displayed. If the stored Files are not
compatible with this unit, these incompatible Files will not be displayed, although the Folders will still be displayed.
EN
22
6.3.
How to Insert a Disc
1. Press [
(OPEN/CLOSE)] to Open the disc tray.
2. Place the Disc on the disc tray with its label side facing up.
3. Press [
(OPEN/CLOSE)] to Close the disc tray.
• It may take a while to load the disc.
Align the Disc to the disc tray guide.
EN
23
7. BASIC PLAYBACK
7.1.
Playing Back a Disc
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
CD
[CD]
[AVCHD]
AVCHD
PHOTO
[JPEG]
FILE
MUSIC
[MUSIC
FILE
1. Insert a disc (refer to “How to Insert a Disc” on page 23).
• When the disc is BD / DVD / AVCHD / Audio CD, playback starts automatically. If not, press [
(PLAY/PAUSE)].
• When Photo and/or Music files are contained on the disc, the File List will be displayed (see step 2). Even if the content type is
of one type only, the File List screen will still be displayed.
• Some discs may show a Title or a Disc Menu. In this case, refer to “Using the Title / Disc / Pop Menu” on page 26.
• “BD-ROM Data (USB) Check” message may be displayed while loading a Blu-ray Disc™.
In such cases, connect a USB Memory Stick first, then insert the Disc. Refer to “Enjoying BD-Live™ Discs Using Internet” on
page 30.
2. Select the type of the file you want to play back, then press [OK].
Item 0/2
..
Photo
Music
Type : Folder
Exit
• Select the Folder/File to Play, and press [
(PLAY/PAUSE)] or [OK].
Refer to “How to Navigate through the File List” on page 22.
To Skip to the next Title / Chapter / Track / File:
Press [
(SKIP FORWARD/UP)].
To Skip to the previous Title / Chapter / Track / File: Press [
(SKIP BACK/DOWN)].
To Pause playback:
Press [
(PLAY/PAUSE)]
To Return to Normal playback:
Press [
(PLAY/PAUSE)]
To Stop playback:
Press [ (STOP)].
Playback will be in Resume-On-Stop mode. To clear the resume information, press [
(STOP)] again.
D Note
• Discs containing AVCHD and Photo/Music files will be played back as AVCHD.
• CDs/DVDs containing FLAC (.flac) files with high frequency and large quantization bit rates may not play properly.
• With regard to the multi-border BD-RE/-R, additionally recorded sections cannot be recognized.
• With regard to the multi-border DVD-RW/-R, additionally recorded sections may not be recognized.
D Note for Photo File Playback
• Every press of [
] will turn the Image by 90 degrees when an Image is displayed.
• Some unplayable Folders or Files may be listed due to the recording status.
• High-resolution Photo files take longer to be displayed.
• Progressive Photo files (Photo files saved in Progressive format) cannot be played back on this unit.
C Caution
• The Screen Saver and Auto Power Off Do Not Function while displaying the Disc Menu or Title Menu. For that reason, leaving the
unit On such Screens may cause Screen Burn-in. To avoid this, turn Off the unit, or press [HOME] to exit the Disc/Title Menu
screen after finishing Disc Playback.
continued on next page
EN
24
C Resume-On-Stop Mode
Blu-ray Disc™ / DVD / AVCHD
When you press [OK] next time, playback will start from the point where it had been stopped. If you press [RETURN]
instead of [OK], playback will start from the beginning.
Audio CD
Playback will start from the point where it was stopped next time you press [OK]. If you press [RETURN] instead of [OK],
playback will start from the the beginning of the 1st track of the Audio CD instead of resuming from the Stop Point.
Music file
When you press [
(PLAY/PAUSE)] or [OK] next time, the playback will start from the point where it has been stopped.
D Note
• If [HOME] is pressed during playback, the playback will stop and the Resume point will be cleared.
• For BD-Java application, the Resume-On-Stop may not be available.
• For BD / DVD / AVCHD / Audio CD, except for Photo files/Music files, Resume-On-Stop mode remains in effect even after Power
is Turned Off. It will be cancelled once the Disc is Ejected.
7.2.
Playing Back Contents from a USB Memory Stick
PHOTO
[JPEG]
FILE
MUSIC
[MUSIC
FILE
You can play back JPEG / PNG / MP3 / FLAC / AAC files stored on a USB Memory Stick. With the USB Memory Stick, you can
also enjoy the following functions.
• Special additional contents for BD-ROM.
(For more information about the special additional contents, refer to the Instruction Book that came with the disc.)
1. Connect a USB Memory Stick.
2. Press [HOME].
3. Use [
] to select “USB”, then press [OK].
4. Select the File type you want to play back, then press [OK].
C Caution
• Do Not Disconnect the USB Memory Stick or Switch the unit to Standby mode while contents on the USB Memory Stick are
being accessed. It may result in Malfunction or Loss of the stick’s Data.
• Occasionally, SD Memory Cards / Micro SD Memory Cards will not be recognized when using certain Adapters. In such cases, try
a different USB Adapter.
D Note
• The Resume information will be cleared when;
– [ (STOP)] or [HOME] is pressed while in Resume-On-Stop mode.
– the USB Memory Stick is disconnected.
– the unit is Switched to Standby mode.
• If a Folder/File name contains an unrecognizable character, the Folder/File name will not be displayed.
• This unit can read JPEG / PNG / MP3 / FLAC / AAC files and AVCHD on an SD Memory Card by using USB Card Reader.
EN
25
7.3.
Using the Title / Disc / Pop Menu
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
[AVCHD]
AVCHD
Some BD-Videos, DVD-Videos or AVCHD files may contain a Title Menu which describes the contents of the disc, or a Disc
Menu which guides you through the available functions on the disc.
• With such discs, a Title Menu or a Disc Menu may appear automatically when you insert the disc. Otherwise, press [TOP MENU]
or [POP MENU/MENU] to call up the Menu. Refer to the Disc’s Manual on how to navigate through the Menu.
D Note
• Menus vary among discs. Refer to the information accompanying the disc for details.
• [TOP MENU] or [POP MENU/MENU] may not work with some discs.
EN
26
8. SPECIAL PLAYBACK
8.1.
Fast Forward / Fast Reverse
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
CD
[AVCHD]
AVCHD
[CD]
1. During playback, press [
(FORWARD)] repeatedly for Fast Forward.
During playback, press [
2. Press [
MUSIC
[MUSIC
FILE
(REVERSE)] repeatedly for Fast Reverse.
(PLAY/PAUSE)] to return to Normal playback.
D Note
• For Blu-ray Disc™, DVD, AVCHD, Audio CD, and Music files, speed changes at 5 different levels.
• For Audio CD and Music files, Fast Forward / Fast Reverse search between different tracks/files are not available.
8.2.
Slow Forward Playback
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
[AVCHD]
AVCHD
1. During playback, press [
Every time you press [
2. Press [
(PLAY/PAUSE)]. Then press [
(FORWARD)].
(FORWARD)], the playback speed changes at 4 different levels.
(PLAY/PAUSE)] to return to Normal playback.
D Note
• Slow Reverse is not available.
8.3.
Step by Step Playback
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
[AVCHD]
AVCHD
1. In Pause mode, press [
Every time you press [
2. Press [
(SKIP FORWARD/UP)] repeatedly.
(SKIP FORWARD/UP)], playback will advance One Step at a time.
(PLAY/PAUSE)] to return to Normal playback.
D Note
• Step by Step Reverse is not available.
EN
27
8.4.
Repeat Playback
Available Repeat functions vary depending on the disc.
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Repeat”, then press [OK].
3. Use [
] to select the desired Repeat mode, then press [OK].
REPEAT MODE
Chapter Repeat
The current Chapter will be played back repeatedly.
Title Repeat
The current Title will be played back repeatedly.
Track Repeat
The current Track/File will be played back repeatedly.
All Repeat
All Tracks/Files in the current folder will be played back repeatedly.
AVAILABLE MEDIA
BD
[BD Video]
[DVD Video]
DVD
BD
[BD Video]
[DVD Video]
DVD
CD
PHOTO
[JPEG]
FILE
MUSIC
[MUSIC
FILE
CD
PHOTO
[JPEG]
MUSIC
[MUSIC
FILE
VIDEO
VIDEO
[CD]
[CD]
VIDEO
VIDEO
FILE
[AVCHD]
AVCHD
[AVCHD]
AVCHD
4. Press [MODE] to Exit.
D Note
• The Repeat setting will be cancelled when you Stop playback.
• Repeat setting may be unavailable with some Blu-ray™ discs.
• Depending on the DVD Video, these are cases where Title Repeat is unavailable.
8.5.
Shuffle / Random Playback
Available Shuffle and Random functions vary depending on the disc.
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Mode”, then press [OK].
3. Use [
] to select the desired Playback mode, then press [OK].
SHUFFLE / RANDOM MODE
Shuffle Playback
Plays all Songs or Photo / Music files in the current folder one at a time
in Random order.
Random Playback
Plays all Songs or Photo / Music files in the current folder repeatedly in
Random order.
4. Press [MODE] to Exit.
EN
28
AVAILABLE MEDIA
CD
PHOTO
[JPEG]
FILE
MUSIC
[MUSIC
FILE
CD
PHOTO
[JPEG]
MUSIC
[MUSIC
FILE
[CD]
[CD]
FILE
8.6.
Slide Show
PHOTO
[JPEG]
FILE
1. Follow steps 1 and 2 in “Playing Back a Disc” on page 24.
2. Open the folder which contains the desired Photo files.
3. Use [
] to select a desired file to be played back, then press [
(PLAY/PAUSE)] or [OK].
• An image will be played back from the selected file.
4. Press [
(STOP)] to Stop playback.
D Note
• Large-size Photo files take time to load before being displayed on the screen.
EN
29
8.7.
PiP (BONUSVIEW™) Setting
BD
[BD Video]
VIDEO
Some BD-Videos have the PiP function which enables you to display the Secondary Video in the Primary Video.
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “PiP” then press [OK].
• PiP information will appear.
3. Use [
] to select the Secondary Video you want to show.
• The Secondary Video will be displayed with Secondary Audio.
4. Press [MODE] to Exit.
• To select the Secondary Audio output, refer to “Switching Audio Soundtrack” on page 34.
D Note
• Secondary video may not be displayed all the time, depending on the scene, it may or may not be available for display.
8.8.
Enjoying BD-Live™ Discs Using Internet
BD
[BD Video]
VIDEO
You can enjoy BD-Live™ which enables you to use interactive features when the unit is connected to the Internet.
Examples of BD-Live™ features:
• Online access to additional content such as movie trailers, Subtitles, BD-Java applications, etc.
• While downloading, special video data may be played back.
– Service and functions differ depending on the disc. Follow the instructions given by the disc when using the
BD-Live™ function.
– Connect a USB Memory Stick with at least 1 GB of available memory before using BD-Live™ features on a
Blu-ray Disc™.
– Do not disconnect the USB Memory Stick while using BD-Live™ features.
D Note
• You must connect the unit to the Internet and set up necessary settings in order to use BD-Live™.
• For the Network Connection, refer to “Connection to the Network” on page 15.
• For the Network setup, refer to “Network Connection” on page 41.
• For certain discs, “BD-Live Connection” under “Network” under “Setup” may need to be changed.
• Depending on your connection environment, it may take a few moments to connect to the Internet or the Internet may not be
connected. Refer to “TROUBLESHOOTING” on page 56.
• Some discs with BD-Live™ function require memory when playing back the content. If you cannot play back a disc with BD-Live™
function, connect a USB Memory Stick (1GB or more of available memory).
• Not all BD-Video discs have a BD-Live™ content. To enjoy the BD-Live™ features, please use discs with a BD-Live™ content.
D Note for AACS Online
• The player or disc ID may be sent to the content provider when playing back a disc with BD-Live™ function.
• If you save your viewing history on the server by using these ID’s, you will be introduced to other similar movies.
• You can save game score histories.
EN
30
8 .9 . Title / Chapter Search
BD
[BD Video]
VIDEO
[DVD Video]
DVD
[AVCHD]
AVCHD
VIDEO
C Using [
(SKIP BACK/DOWN)] / [
1. During playback, press [
(SKIP FORWARD/UP)]
(SKIP FORWARD/UP)] to Skip the current Title or Chapter and move to the next.
The Title or Chapter will move forward one at a time.
• If there is no Chapter in a Title, the current Title may be Skipped.
To go back to the beginning of the current Title or Chapter, press [
(SKIP BACK/DOWN)].
Press [
(SKIP BACK/DOWN)] repeatedly to go to the previous Title or Chapter. The Title or Chapter may move
backward one at a time.
C Using [MODE]
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Search”, then press [OK].
3. Use [
] to select Title Search or Chapter Search, then press [OK].
e.g.) Blu-ray Disc™
005/029
001/028
1 / 3 English Dolby Audio – DolbyTrueHD 5.1
1 / 4 English
4. Use [
00:21:54
] to select the Title / Chapter number, then press [OK].
Playback will start from the beginning of the Title / Chapter.
D Note
• As for BD-Video, how it performs is strongly determined by the disc, and may not perform as described.
• For DVD, Title Search can be performed on the Stop screen by pressing [MODE] while in Stop mode or Resume-On-Stop
mode.
8.10. Track / File Search
CD
[CD]
PHOTO
[JPEG]
C Using [
FILE
MUSIC
[MUSIC
FILE
(SKIP BACK/DOWN)] / [
1. During playback, press [
(SKIP FORWARD/UP)]
(SKIP FORWARD/UP)] to Skip the current Track or File and move to the next.
The Track / File will move forward one at a time. To go back to the beginning of the current Track / File,
press [
(SKIP BACK/DOWN)].
Press it repeatedly to go to the previous Track / File. The Track / File will move backward one at a time.
• For Photo files, press [
(SKIP BACK/DOWN)] once to go to the previous file.
C Using [MODE]
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Search”, then press [OK].
• For Photo files, move on to step 4.
3. Use [
4. Use [
] to select Track Search, then press [OK].
] to select the Track / File number, then press [OK].
Playback will start from the beginning of the Track.
EN
31
8 .1 1 . Time Search
BD
[BD Video]
VIDEO
[DVD Video]
DVD
CD
[CD]
VIDEO
[AVCHD]
AVCHD
MUSIC
[MUSIC
FILE
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Search”, then press [OK].
3. Use [
] to select Time Search, then press [OK].
• Blu-ray Disc™ / DVD-Video / AVCHD: “
Audio CD: “
” or “
”.
” or “
”.
e.g.) Blu-ray Disc™
001/028
005/029
1 / 3 English Dolby Audio – DolbyTrueHD 5.1
1 / 4 English
00:21:54
4. Enter the time count you want to jump to.
• Use [
] to enter the time count, then press [OK].
Playback will start from the desired time entered.
8.12. Number Select Search
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
[AVCHD]
AVCHD
Some BD-Videos and DVD-Videos or AVCHD files have Button menus to jump to each Button displayed scene. During playback
the scenes which have the Button menu, you can enter the Button number by using the Number Select Menu.
1. During playback, press [MODE] to display the Play Menu.
] to select “Number Select”, then press [OK].
2. Use [
e.g.) Blu-ray Disc™
0000
• For BD-Java, a single-digit Number Select Menu is displayed.
• For DVD, a double-digit Number Select Menu is displayed.
• For BD-Videos and AVCHD files, the Number Select Menu is displayed even if there is no Button menu in the scene.
3. Use [
] to enter the number you want to jump to.
• To move to the digit you wish to change, press [
].
4. After all digits are entered, press [OK].
Playback of the selected scene will start.
D Note
• As for the BD-Video, how it performs is strongly determined by the disc, and may not perform as described.
EN
32
8.13. Switching Subtitles
Some Video materials may have Subtitles in one or more languages. For commercially available discs, the supported languages can
be found on the disc case. Follow the steps below to switch the Subtitle language during playback.
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
[AVCHD]
AVCHD
C Using [SUBTITLE]
1. During playback, press [SUBTITLE].
• Pressing [SUBTITLE] repeatedly switches the Subtitles.
1 / 5 English
• For Blu-ray™ discs, [SUBTITLE] is only available in Primary Subtitle.
C Using [MODE]
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Subtitle”, then press [OK].
3. Use [
] to select your desired Subtitle, then press [OK].
e.g.) Blu-ray Disc™
BDMV
Display
Search
Audio
Subtitle
1 / 5 English
Subtitle Style
Repeat
4. Press [MODE] to Exit.
C Subtitle Style
For Blu-ray™ discs, the text style can be changed if Subtitle Style is available.
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Subtitle Style”, then press [OK].
3. Use [
] to select your desired Style, then press [OK].
4. Press [MODE] to Exit.
D Note
• Some discs will only allow you to change the Subtitles from the Disc Menu or Pop Menu. Press [TOP MENU] or
[POP MENU/MENU] to display the Disc Menu or Pop Menu.
• If the disc has no Subtitle language or Subtitle Style, “
” will appear if you press [
] or [SUBTITLE].
• During playback of the Secondary Video, the Primary Subtitle setting is not available except when there is no Subtitle for the
Secondary Video.
EN
33
8.14. Switching Audio Soundtrack
When playing back Video material recorded with two or more soundtracks (these are often in different Audio Languages or
Audio formats), you can switch between them during playback.
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
[AVCHD]
AVCHD
C Using [AUDIO]
1. During playback, press [AUDIO].
• Pressing [AUDIO] repeatedly switches the Audio.
1 / 5 English DolbyAudio– DolbyTrueHD 5.1
• For Blu-ray™ discs, [AUDIO] is only available in Primary Audio.
C Using [MODE]
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Audio”, then press [OK].
3. Use [
] to select your desired Audio, then press [OK].
e.g.) Blu-ray Disc™
BDMV
Display
Search
Audio
1 / 5 English Dolby Audio - Dolby
Subtitle
Subtitle Style
Repeat
4. Press [MODE] to Exit.
C Secondary Audio
For Blu-ray™ discs, the Audio in PiP can be switched. (Refer to “PiP (BONUSVIEW™) Setting” on page 30.)
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Secondary Audio”, then press [OK].
3. Use [
] to select your desired Audio, then press [OK].
4. Press [MODE] to Exit.
D Note
• Secondary Audio will not be output when Secondary Video is not displayed or when the HDMI setting for Audio output is set to
“Bitstream”. (For some Blu-ray™ discs, Secondary Audio will be output even when Secondary Video is Off.)
• Sound mode cannot be changed during playback of discs not recorded in Multiple Audio mode.
• Some discs allow changing the Audio language setting from Disc Menu. (Operation varies depending on the discs. Refer to the
Manual accompanying the disc.)
• [AUDIO] may not work on some discs with Multiple Audio streams or Channels (e.g. DVDs that allow changing Audio setting
on the Disc Menu).
• If the disc has no Audio Language, “
” will appear if you press [
] or [AUDIO].
EN
34
8.15. Switching Camera Angles
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
Some BD-Videos and DVD-Videos contain scenes which have been shot simultaneously from various angles. You can change the
appears on the TV screen.
Camera Angle when
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “Angle”, then press [OK].
3. Use [
] to select your desired angle, then press [OK].
4. Press [MODE] to Exit.
D Note
• If “Angle Mark” setting is set to “Off ”,
will not appear on the TV screen.
8.16. Noise Reduction
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
[AVCHD]
AVCHD
Reduces the noise of the playback picture.
1. Press [HOME] to access the Home Menu.
2. Use [
] to select “Setup”, then press [OK].
3. Use [
] to select “
”, then press [OK].
4. Use [
] to select “Picture Control”, then press [OK].
5. Use [
] to select “Noise Reduction”, then press [OK].
6. Use [
] to select your desired setting, then press [OK].
7. Press [HOME] to Exit.
D Note
• With regard to the setting value, the larger the value is, the more notably the effect appears. Value “0” turns Off Noise Reduction.
EN
35
8.17. Closed Caption
BD
[BD Video]
VIDEO
[DVD Video]
DVD
VIDEO
[AVCHD]
AVCHD
Closed Caption displays Subtitles in synchronization with the Video.
1. During playback, press [MODE] to display the Play Menu.
2. Use [
] to select “CC Select”, then press [OK].
3. Use [
] to select your desired Stream, then press [OK].
4. Press [MODE] to Exit.
D Note
• Configure the Closed Caption display settings (font color, size, style, etc.) in the Setup in advance. Refer to page 39-40.
EN
36
9. NETWORK FEATURES
9.1.
Before Using Network Features
Please follow the instructions below before using Network features.
1. Connect this unit to the Internet.
• Refer to “Connection to the Network” on page 15.
2. Set up necessary Network Connection settings.
• Refer to “Network Connection” on page 41.
3. Use [
] to select the desired Application in the Home Menu, then press [OK].
4. Press [HOME] to Exit.
D Note
• Pressing [NETFLIX] / [VUDU] / [YouTube] allows you to directly access the corresponding Network service.
9.2.
Information on Network Services
For detailed information on the third-party Internet services, please visit each Service Provider's Website:
Netflix :
http://www.netflix.com
VUDU :
http://www.vudu.com
YouTube™:
http://www.youtube.com
Netflix / VUDU / YouTube™ can be deactivated in Setup.
1. Press [HOME] to access the Home Menu.
2. Use [
] to select “Setup”, then press [OK].
3. Use [
] to select “
4. Use [
] to select “Streaming Content”, then press [OK].
5. Use [
] to select the desired Network Service from “Netflix”, “VUDU”, or “YouTube”, then press [OK].
• When pressing [OK], “
”, then press [OK].
” will be displayed before the “Deactivate” text.
C Caution
• Some features may require an always-on Broadband Internet connection, Software Update and/or a minimum Bandwidth.
Internet services vary by location. Third party Internet services are not provided by Funai Corporation, Inc., and may change or be
discontinued at any time and may be subject to third party restrictions. Funai Corporation, Inc. does not make any representations
or warranties about these services, which may require the creation of a User account through a computer with Internet access
and one-time and/or recurring charges.
EN
37
10.
LIST OF SETTINGS
In “Setup”, you can customize various kinds of settings as you prefer.
Refer to the following instructions to navigate through the Setup Menu.
1. Press [HOME] to access the Home Menu.
2. Use [
] to select “Setup”, then press [OK].
3. Use [
] to select the desired Setting, then press [OK].
4. Use [
] to select the desired Category, then press [OK].
5. Use [
] to move up and down the list to select Menus / Options.
6. To make a selection or to access options for an item, select the desired item, then press [OK].
• To go back to the previous screen, press [RETURN] or [
].
7. Press [HOME] to Exit.
Refer to the following table for the types of settings you can customize.
The items highlighted in gray are the Default Settings.
Settings
Mode Settings
Category
Network
Menus / Options
Ethernet (Wired)
Wireless
Interface
Wireless Setting
Network Status
Connection Test
IP Setting
BD-Live Connection
Proxy Setting
Language
OSD
Menu
Audio
Auto
Manual
Allow
Limited Allowance
Prohibit
Disable
Enable
Proxy Host
Proxy Port
English
Français
Español
Chinese
German
Russian
Danish
Italian
Spanish
Dutch
Japanese
Swedish
English
Korean
More
Finnish
Norwegian
French
Portuguese
Chinese
German
Russian
Danish
Italian
Spanish
Dutch
Japanese
Swedish
English
Korean
More
Finnish
Norwegian
French
Portuguese
continued on next page
EN
38
Settings
Mode Settings
Category
Language
Streaming Content
Security
Menus / Options
Subtitle
Off
French
Chinese
German
Portuguese
Russian
Danish
Italian
Spanish
Dutch
Japanese
Swedish
English
Korean
More
Finnish
Norwegian
Netflix Information
Netflix
Deactivate Netflix
VUDU
Deactivate VUDU
YouTube
Deactivate YouTube
Change Password
Parental Control
System
fun-Link(HDMI CEC)
On
Off
Software Update
Disc
Network
USB Memory Stick
BD-ROM Data(USB)
BD-ROM Data (USB) Information
Unit Name
Copyright
Disclaimer
Digital Rights Mgmt
Load Default
Display Setting
TV
TV Screen
16:9 Full
Resolution
4:3 Pan&Scan
16:9 Normal
4:3 Letterbox
Auto
1080i
480p
1080p
720p
HDMI 1080p 24Hz
On
Off
Picture Control
Noise Reduction
Angle Mark
0
2
1
3
On
Off
Closed Caption
CC Attribute
Auto
Custom
Font color
Font size
Default
Red
Yellow
White
Green
Magenta
Black
Default
Blue
Cyan
Standard
Small
Large
continued on next page
EN
39
Settings
Display Setting
Category
Closed Caption
Menus / Options
Default
Font style
Monospaced with serifs
Proportionally spaced with serifs
Monospaced without serifs
Proportionally spaced without serifs
Casual font type
Cursive font type
Small capitals
Font opacity
Solid
Translucent
Transparent
Font edge
Default
Uniform
None
Left drop shadowed
Raised
Right drop shadowed
Depressed
Font edge color
BG color
White
Blue
Black
Yellow
Red
Magenta
Green
Cyan
Default
Blue
White
Yellow
Black
Magenta
Red
Cyan
Green
Solid
BG opacity
Translucent
Transparent
Window color
Window opacity
Default
Blue
White
Yellow
Black
Magenta
Red
Cyan
Green
Solid
Translucent
Transparent
Audio Setting
Audio Output
HDMI
Bitstream
PCM
Re-encode
Dolby DRC
Off
On
Auto
System Information
EN
40
11.
SETUPS
11.1. Network Connection
HOME A “Setup” A “
” A “Network”
Perform the Network Connection Setup in order to use Network Features, such as BD-Live™, Netflix, VUDU, YouTube™ and
the Network Update function.
C Connection Test
After you enable a Network Connection or change Network settings, always perform the Connection Test to check to see if the
Connection is correctly made.
1. Use [
] to select “Setup” in the Home Menu, then press [OK].
2. Use [
] to select “
3. Use [
] to select “Network”, then press [OK].
4. Use [
] to select “Connection Test”, then press [OK].
”, then press [OK].
• Connection Test will automatically start. The test result will appear right after the test finishes.
5. If the Connection Test passes, press [OK].
D Note
• If the Connection Test passes, you are ready to use BD-Live™, Netflix, VUDU, YouTube™ and Network update function, using the
Internet without making any additional settings.
• If the Connection Test fails, you may need to check your Router settings and make sure the physical connection is secure. If you
need the MAC address of this unit to complete your Router settings, you can view it in System Information.
• When connecting this unit directly to a Modem for the first time or connecting it to a Modem which was previously connected to
any other Network device (e.g. a Router, PC, etc.), you may have to Power cycle the Modem (unplug the Modem’s and/or Router’s
AC Power cord from its AC outlet for 30 seconds and then plug it back in), this may reset the settings in the Modem. If you have a
Telephone/Internet Modem with your cable service then you may have to use its Reset button or remove the Backup Battery to
reset this type of Modem.
• If the Connection Test fails, this unit is not connected to the Internet. In this case, you cannot use the BD-Live™ function or access
Network services, such as Netflix, VUDU or YouTube™. Please confirm Router settings or contact your ISP (Internet Service Provider)
for troubleshooting assistance.
C Wired Connection
Auto
In order to make a Wired Connection, connect an Ethernet cable from a Router with Internet access. A Network will
automatically be established.
• In order to confirm that this unit is connected to the Internet, perform “Connection Test” (refer to page 41).
• In order to switch from Wireless Connection to Wired, perform the following steps.
1. Connect an Ethernet cable from a Router with Internet access.
2. Use [
] to select “Setup” in the Home Menu, then press [OK].
3. Use [
] to select “
”, then press [OK].
4. Use [
] to select “Network”, then press [OK].
5. Use [
] to select “Interface”, then press [OK].
6. Use [
] to select “Ethernet”, then press [OK].
• When attempting to switch from “Wireless” to “Ethernet”, a confirmation screen will appear. Use [
press [OK].
• Network setting will automatically be performed.
] to select “Yes”, then
continued on next page
EN
41
Manual
In the following cases, configure each setting as necessary.
– When connection test failed with Auto setting.
– When instructed by your Internet service provider to make specific settings in accordance with your Network environment.
IP setting
] to select “Setup” in the Home Menu, then press [OK].
1. Use [
2. Use [
] to select “
3. Use [
] to select “Network”, then press [OK].
4. Use [
] to select “IP setting”, then press [OK].
5. Use [
] to select “Manual”, then press [OK].
”, then press [OK].
6. “Network Information” setting screen will appear.
Setup
Network
Language
Streaming Co...
Security
System
Network Information
Ethernet
Interface
Manual
Address Type
0.
0.
0.
IP Address
0.
0.
0.
Subnet Mask
0.
0.
0.
Default Gateway
0.
0.
0.
Primary DNS
0.
0.
0.
Secondary DNS
0.
0.
0.
0.
0.
• Use [
] to enter a Number. Every short press of [
] changes the number by 1, while every long press changes
by 10.
• The range of input Numbers is between 0 and 255.
• Use [
] to move between input fields.
• When all items are entered, press [OK] to confirm the Entries.
• Press [RETURN] to complete the Configurations.
7. In order to confirm that this unit is connected to the Internet, perform “Connection Test” (refer to page 41).
• If this connection uses the Proxy Server, perform “Proxy Setting”(refer to page 43) before “Connection Test”.
D Note
• Enter an IP Address after checking the specifications of your Router.
• If an IP Address is unknown, check the IP Address of other devices (e.g. PC connected with a LAN cable). Then, in the fourth cell
to the right, assign a different number from those other devices.
• Enter the DNS Addresses provided by your Internet service provider.
• If the DNS Address is unknown, check the DNS Address of other devices (e.g. PC connected via LAN cable) and assign the same
DNS Address.
continued on next page
EN
42
Proxy Setting
1. Follow steps 1 to 3 in “IP setting” on page 42.
2. Use [
] to select “Proxy Setting”, then press [OK].
3. Use [
] to select “Enable”, then press [OK].
4. Use [
] to select “Proxy Host”, then press [OK].
5. “Proxy Host” setting screen will appear. Enter a Proxy address using the cursor buttons and [OK].
Setup
a
f
k
p
u
b
g
l
q
v
c
h
m
r
w
d
i
n
s
x
e
j
o
t
y
1
4
7
.
z
2
5
8
@
3
6
9
0
ABC
Back Space Enter Clear
• After completion, select “Enter” on the Software Keyboard.
6. Use [
] to select “Proxy Port”, then press [OK].
] to enter a Number and [
7. “Proxy Port” setting screen will appear. Use [
all Fields are entered, press [OK] to confirm the Entries.
] to move between Input Fields. When
Setup
Network
Language
Change Proxy Port
Please Enter the New Port:
Streaming Co...
Security
0
0
0
0
1
System
• The range of input numbers for the Port number is between 0 and 65535. (This number must be no greater than 65535.)
8. In order to confirm that this unit is connected to the Internet, perform “Connection Test” (refer to page 41).
D Note
• For Proxy Port, certain Ports might be closed, blocked or unusable depending on your Network environment.
• When the settings are changed, the Network Connection may be disabled depending on the device.
continued on next page
EN
43
C Wireless Connection
If you connect this unit to a Wireless Network, select “Wireless” and set up necessary settings.
Please make a note of your SSID (Service Set Identifier – Wireless Network Name) and its WEP* / WPA / WPA2 Key before
proceeding with the Setup.
* “Auto” cannot be used when the Security protocol is set to “WEP”.
Auto
PBC (Push Button Configuration)
You can set up a Wireless Connection quickly.
(“PBC” is only available when your Router supports it. For details, please refer to the User Manual of your Wireless Router.)
Please confirm your Wireless Router has a PBC* (Push Button Configuration) button.
] to select “Setup” in the Home Menu, then press [OK].
1. Use [
2. Use [
] to select “
”, then press [OK]
3. Use [
] to select “Network”, then press [OK].
4. Use [
] to select “Interface”, then press [OK].
• If you would like to make a change in Wireless settings, select “Wireless Setting”.
• After selecting “Wireless Setting”, a confirmation screen will appear.
Use [
] to select “Yes”, then press [OK]. After pressing [OK], move on to step 6.
5. Use [
] to select “Wireless”, then press [OK].
• When attempting to switch from “Ethernet” to “Wireless”, a confirmation screen will appear.
Use [
] to select “Yes”, then press [OK].
6. Use [
] to select “Auto”, and use [
7. Use [
] to select “PBC”.
] to select “Next”, then press [OK].
Setup
Network
Language
Streaming Co...
WPS(Wi-Fi Protected Setup)
PBC
PIN
Please press Push Button on the Access Point within
120 seconds after you select the "Next" Button below.
Security
System
Refresh
Previous
Next
8. Push the PBC button* on your Wireless Router, then quickly select “Next” using [
] and press [OK].
* PBC button may be called WPS (Wi-Fi Protected Setup) button on your Wireless Router.
9. “Connection success and IP is obtained.” will be displayed. Press [OK] to complete the Settings.
D Note
“Auto” cannot be used when the Security mode of your Access Point is set to “WEP”.
Please try either Method below.
• Connect the unit to the Access Point using “Scan” or “Manual” mode.
• Change the Access Point’s security mode from “WEP*” to “WPA” or “WPA2”.
* “WEP” is not recommended to be used due to its “Major security flaws”. Change the Security protocol on the Wireless Router
to “WPA” or “WPA2 (recommended)” mode.
(For Access Point configuration, please consult the User Manual of your Wireless Router or Manufacturer.)
continued on next page
EN
44
Scan
1. Follow steps 1 to 5 in “Auto” on page 44.
2. Use [
] to select “Scan”, and use [
] to select “Next”, then press [OK].
• This unit will automatically start searching for nearby Wireless Networks.
3. The search result will be displayed. Use [
] to select an appropriate SSID, then press [OK].
• If you select an SSID with “NONE” in the Security column, move on to step 7.
Setup
Network
Language
Streaming Co...
Security
System
SSID
Security
access_point_
access_poi...
access_poi...
access_poi...
access_poi...
access_poi...
Signal Strength
WPA2-PSK
WPA-PSK
WPA2-PSK
WPA2-PSK
WPA-PSK
WPA2-PSK
100%
100%
100%
100%
100%
100%
4. “WEP / WPA / WPA2 Key” entry screen will appear. Use [
] to select the input field, then press [OK]. The Software
Keyboard will appear.
Setup
Network
Language
WPA-PSK
Streaming Co...
Security
System
Previous
Exit
Next
5. Enter the WEP / WPA / WPA2 Password of the selected Wireless Network using Cursor buttons and [OK]. After entering the
Password, select “Enter”, then press [OK].
• If you do not know the WEP / WPA / WPA2 Key for your Wireless Network, please confirm the sticker on the Router.
• The WEP / WPA / WPA2 Key entries are case-sensitive.
Setup
a
f
k
p
u
b
g
l
q
v
c
h
m
r
w
d
i
n
s
x
e
j
o
t
y
1
4
7
.
z
2
5
8
@
3
6
9
0
ABC
Back Space Enter Clear
continued on next page
EN
45
6. Use [
] to select “Next”, then press [OK].
Setup
Network
Language
WPA-PSK
Streaming Co...
**********
Security
System
Previous
Exit
Next
7. “Connection success and IP is obtained.” will be displayed. Press [OK] to complete the Settings.
D Note
• The Internal Wireless LAN supports following specifications.
– Wireless standards: IEEE 802.11 b/g/n
– Frequency: 2.4 GHz
– Security protocol: WEP* / WPA / WPA2
* “WEP” is not recommended to be used due to its “Major security flaws”. Change the Security protocol on the Wireless
Router to “WPA” or “WPA2 (recommended)” mode.
Manual
Set up the connection to the Wireless Router manually by entering the SSID.
In the following cases, select “Manual” to set each setting as necessary.
– When connection test failed with the setting of “Scan”.
1. Follow steps 1 to 5 in “Auto” on page 44.
2. Use [
] to select “Manual”, and use [
3. Use [
] to select the SSID entry field, then press [OK]. The Software Keyboard will appear.
4. Use [
5. Use [
] to select “Next”, then press [OK].
] and [OK] to enter the SSID. After entering the SSID, select “Enter”, then press [OK].
] to select “Next”, then press [OK].
6. Security Mode selection screen will appear. Use [
] to select the desired Security Mode, then press [OK].
• If you select “None”, please go to step 10.
Setup
Network
Language
Streaming Co...
Security
System
Please select the Security Mode
None
WEP
WPA2-PSK(AES)
WPA/WPA2-PSK(AUTO)
Previous
Next
continued on next page
EN
46
7. “WEP / WPA / WPA2 Key” entry screen will appear. Use [
] to select the WEP / WPA/ WPA2 Password entry field, then
press [OK]. The Software Keyboard will appear.
8. Enter the WEP/WPA/WPA2 Password of the selected Wireless Network using Cursor buttons and [OK]. After completing
the Password entry, select “Enter”, then press [OK].
• If you do not know the WEP/WPA/WPA2 Key for your Wireless Network, please check if it is on a sticker on the Router or
ask someone in your household who might know the Password.
• The WEP / WPA / WPA2 Key entries are case-sensitive.
9. Use [
] to select “Next”, then press [OK].
10. “Connection success and IP is obtained.” will be displayed. Press [OK] to complete the Settings.
C Network Status
You can check the current status of Network Status and Wireless status.
1. Follow steps 1 to 3 in “Connection Test” on page 41.
2. Use [
] to select “Network Status”, then press [OK].
• The current Network Settings and Wireless Router Setting will be displayed.
3. Press [HOME] to return to the Home Menu.
C Netflix ESN
You can view the ESN (Electronic Serial Number, which Netflix uses to identify your device).
Netflix customer service might ask you for this number during troubleshooting.
1. Use [
] to select “Setup” in the Home Menu, then press [OK].
2. Use [
] to select “
3. Use [
] to select “Streaming Content”, then press [OK].
4. Use [
] to select “Netflix Information”, then press [OK].
”, then press [OK].
5. Press [HOME] to return to the Home Menu.
EN
47
11.2. fun-Link (HDMI CEC)
HOME A “Setup” A “
” A “System” A “fun-Link(HDMI CEC)”
fun-Link(HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard. This function may not work
properly depending on the device connected to the unit. When “fun-Link(HDMI CEC)” setting is set to “On” the functions listed
below will be available.
C One Touch Play
When the Buttons below are pressed then Operations are performed on this unit, the TV will automatically be Turned On and
switched to the appropriate video Source Input.
Buttons for One Touch Play:
(PLAY/PAUSE)] (on the unit)
• [
• [
(PLAY/PAUSE)], [
(SKIP BACK/DOWN)], [
(SKIP FORWARD/UP)], [HOME] (on the Remote Control)
• [TOP MENU] or [POP MENU/MENU] (on the Remote Control when a disc is inserted in the unit)
C One Touch Standby
When you press and hold [y(POWER/Standby)] for 2 seconds, it turns Off the TV first and then Turns Off the Power on
this unit.
When the connected HDMI CEC compatible display device is Turned Off first, then it Turns Off the the Power on this unit.
EN
48
11.3. HDMI Video Resolution
HOME A “Setup” A “
” A “TV” A “Resolution”
Sets the Resolution of the Video Signal Output from the HDMI OUT jack.
C Set up Resolution
1. Use [
] to select “Setup” in the Home Menu, then press [OK].
2. Use [
] to select “
”, then press [OK].
3. Use [
] to select “TV”, then press [OK].
4. Use [
] to select “Resolution”, then press [OK].
5. Use [
] to select your desired Setting, then press [OK]. On the confirmation screen, use [
] to select “OK”, then
press [OK].
6. Press [HOME] to Exit.
C Set up HDMI 1080p/24Hz
1. Follow steps 1 to 3 in “Set up Resolution” above on this page.
2. Use [
] to select “HDMI 1080p 24Hz”, then press [OK].
3. Use [
] to select “On” or “Off ”, then press [OK].
4. Press [HOME] to Exit.
You can select the desired “Resolution” among the settings listed below: “Auto”, “480p”, “720p”, “1080i”, “1080p”.
Actual Output Resolution:
Setting in
“Resolution”
Setting in
“HDMI 1080p 24Hz”
720p
1080i
480p/60
720p/60
1080i/60
1080p/60
1080p/24*
On
The highest resolution supported by your display device will automatically be in effect.
* Images will be output in 1080p/24 when the connected device supports 1080p/24.
Off
The highest resolution supported by your display device will automatically be in effect.
* Images will be output in 1080p/60 even if the connected device supports
1080p/24.
Auto
480p
Source
480i/60
On
480p/60
Off
On
720p/60
Off
On
1080i/60
Off
On
1080p/60
* Images will be output in 1080p/24 when the connected device supports 1080p/24.
Off
1080p/60
* Images will be output in 1080p/60 even if the connected device supports 1080p/24.
1080p
continued on next page
EN
49
D Note
• The selected Resolution must also be supported by your display device.
• If your TV and the unit are connected by a DVI cable and if “Auto” is selected, “480p” will be automatically in effect.
• Refer also to your TV’s manual.
• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• The Audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit length) may be
limited by the connected device.
• Among the display devices that support HDMI, some do not support Audio output (for example, projectors). While connected to
a device such as a projector, Audio will not be output from the HDMI OUT jack.
• When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI-DVI
converter cable, the signals are output in digital RGB.
• HDMI video resolution does not work during playback of a BD-Video.
Copyright protection system
To play back digital video images of a BD-Video or DVD-Video via an HDMI connection, it is necessary that both the player
and display device (or an AV Receiver / Amplifier) support a Copyright Protection System called HDCP (High-bandwidth
Digital Content Protection system). HDCP is Copy Protection Technology which prevents copying or playback of encrypted
content when connected to a non-HDCP compliant AV device. This unit supports HDCP. Please read the Operating
Instructions of your display device (or an AV Receiver / Amplifier) for more information.
EN
50
11.4. Parental
Some BD-Videos or DVD-Videos feature Parental Lock levels. Playback will stop if the ratings of the content exceed the levels
you set on the player, it will require you to enter a Password before the disc will play back. This feature prevents your children
from viewing inappropriate material.
C Change Password
HOME A “Setup” A “
1. Use [
” A “Security” A “Change Password”
] to select “Setup” in the Home Menu, then press [OK].
2. Use [
] to select “
”, then press [OK].
3. Use [
] to select “Security”, then press [OK].
4. Use [
] to select “Change Password”, then press [OK].
5. Enter your 4-digit Password.
• The default value is “0000”.
• Use [
] to enter the first digit of your Password, then press [
• When 4-digit numbers are entered, press [OK].
].
6. Set a new Password.
• Use [
] to enter numbers, then use [
] to move the input field. After having entered the 4th number, press [
For confirmation, re-enter the same Password, then press [OK].
• Record your new Password, in case you forget it.
].
7. Press [HOME] to Exit.
continued on next page
EN
51
C BD / DVD Rating Level
HOME A “Setup” A “
1. Use [
” A “Security” A “Parental Control”
] to select “Setup” in the Home Menu, then press [OK].
2. Use [
] to select “
3. Use [
] to select “Security”, then press [OK].
4. Use [
] to select “Parental Control”, then press [OK].
”, then press [OK].
5. Enter your 4-digit Password.
•
•
•
•
The default value is “0000”.
If you have not changed the Password, change it. (referto page 51)
Use [
] to enter the first digit of your Password, then press [
When 4-digit numbers are entered, press [OK].
6. Use [
].
] to select your desired Level, then press [OK].
7. Press [HOME] to Exit.
Off
1 [Kid Safe]
2 [G]
3 [PG]
4 [PG-13]
5 [PGR]
6 [R]
7 [NC-17]
8 [Adult]
RATING EXPLANATIONS
Parental Control is inactive; all discs can be played back.
Suitable for children.
General Audience.
Parental Guidance suggested.
Unsuitable for children under 13.
Parental Guidance Recommended.
Restricted; under 17.
No one under 17.
BD/DVD software of any Level (adult / general / children) can be played back.
To temporarily disable Parental Lock:
Some discs allow you to temporarily disable Parental Lock. When you try to play them back, the Password entry screen will be
displayed.
Follow the Instruction which appears on the TV screen to disable Parental Lock.
EN
52
11.5. Software Update
HOME A “Setup” A “
” A “Security” A “Software Update”
This unit lets you Update the Software yourself using a Software Update Disc or USB Memory Stick, or via the Internet.
The available Discs are below:
• BD-RE/-R
• DVD-RW/-R
• CD-RW/-R
C Disc / USB Memory Stick Update
You can update the Software by using a Disc or USB Memory Stick.
Prepare a blank Disc or USB Memory Stick for Software Update:
Navigate to www.magnavox.com/support/ Website, and download the latest Software version to a blank Disc or USB Memory
Stick using a PC by following the directions described on the website.
• Use a blank Disc or USB Memory Stick, download one Software Update per Disc or USB Memory Stick. Write the Software into
the root directory of the Disc or USB Memory Stick.
• For more details on how to Download the Software, please refer to the Instructions indicated on the Website.
1. Insert the Disc or connect the USB Memory Stick for Software Update.
• If a Disc is inserted, the File List will appear. Press [HOME].
• After connecting a USB Memory Stick, wait 10-20 seconds, then move on to step 2.
2. Use [
] to select “Setup” in the Home Menu, then press [OK].
3. Use [
] to select “
”, then press [OK].
4. Use [
] to select “System”, then press [OK].
5. Use [
] to select “Software Update”, then press [OK].
6. Use [
] to select “Disc” or “USB Memory Stick”, then press [OK].
• This unit now starts loading the Update File, then Installs it. Update will take a while. Leave the unit until it automatically restarts.
7. After Updating finishes, this unit will Restart automatically. Remove the Disc or USB Memory Stick from this unit.
C Caution
• Please Do Not Unplug the AC Power cord, Eject the Disc or Unplug the USB Memory Stick or press [y(POWER/
Standby)] on Unit or Remote to turn the unit to Standby mode while performing a “Disc / USB Memory Stick Update”.
D Note
• Software Update will not change any of the current Settings.
continued on next page
EN
53
C Network Update
You can Update the Software of this unit via the Internet if it is connected to the Internet.
1. Follow steps 2 to 5 in “Disc / USB Memory Stick Update” on page 53.
2. Use [
] to select “Network”, then press [OK].
• The unit will connect to the Server, then check for the latest software version.
3. Software Version confirmation screen will appear. Press [OK].
• Downloading of the latest Software will start. (Download may take some time.)
After completing the download, Update will start.
4. After Updating finishes, this unit will restart automatically.
C Caution
• Please Do not Unplug the AC Power cord, Ethernet cable, Wireless Modem / Router or press [y(POWER/Standby)] to
turn the unit to Standby mode while using “Network Update”.
D Note
• In order to Update the Software via the Internet, you must connect the unit to the Internet and Set up necessary Settings.
• For the Network Connection, refer to “Connection to the Network” on page 15.
• For the Network Setup, refer to “Network Connection” on page 41.
• Software Update will not change any of the current Settings.
EN
54
11.6. Restore Default Settings
HOME A “Setup” A “
” A “System” A “Load Default”
This unit will be Reset to Factory Default Settings. All the settings will be Initialized.
1. Use [
] to select “Setup” in the Home Menu, then press [OK].
2. Use [
] to select “
”, then press [OK].
3. Use [
] to select “System”, then press [OK].
4. Use [
] to select “Load Default”, then press [OK].
5. Confirmation message will appear. Use [
] to select “OK”.
• Initialization will start.
D Note
• The Initial Setup screen will appear upon completion of Initialization.
EN
55
12.
TROUBLESHOOTING
Problem
No Power.
No Sound or Picture.
No reaction to the Remote Control.
No Audio / Video signal on the display
device via HDMI cable.
No high-definition video signal on the
TV screen.
Distorted picture.
T ip
Check if the AC Power cord is properly connected.
Try another Power outlet.
Unplug the AC Power cord, and wait for about 5-10 seconds. Plug it back in and
attempt to Power On the unit.
Make sure both the TV and Blu-ray Disc™ player are Turned On.
Confirm the connections to the TV are made properly as shown in the
“CONNECTIONS” on page 12.
Check to see whether the connected TV or another device supports HDCP. (This
unit will not output a video signal unless the other device supports HDCP.)
Reduce the distance to infrared sensor window.
Confirm that the player’s AC Power cord is plugged into a Power outlet.
Check the batteries in the Remote Control and make sure they are inserted properly
by + or - symbols. See how to check the Remote operation on page 62
If the unit is connected to a non-certified HDMI device, the Audio / Video signal will
not be sent to that device.
Make sure the display device is on the correct Input / Video source.
Perform an HDMI hotplug: Disconnecting the HDMI cable from the display device,
Turn On both devices, and replug the HDMI cable back in.
Check with the TV Manufacturer, if there are any Software Updates available for the
TV.
Check to see if the HDMI cable is a certified version.
Does the disc contain high-definition video? High-definition video is only available
when the disc contains it.
Does the TV support high-definition video? High-definition video is only available
when the TV supports it.
Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
Make sure the disc is compatible with this unit.
Completely distorted picture or black /
white picture with Blu-ray Disc™ / DVD
Disc.
No Sound or distorted Sound.
Adjust the volume.
Check to see if the speakers are connected correctly.
Check the HDMI connection.
Make sure the HDMI cable is not plugged into an HDMI-DVI adapter which does not
handle Digital sound.
Check the settings in “Audio Output” menu.
Picture freezes momentarily during disc Check the disc for fingerprints / scratches and clean with a soft cloth wiping from the
playback.
center to the outer edge.
Cannot play back a disc.
Make sure that the Unit supports the disc.
Check the Region Code for the disc. This unit supports the following Region Codes.
- Blu-ray Disc™: “A”
- DVD: “ALL” or “1”
For DVD-RW/-R, make sure that the disc is finalized.
Clean the disc.
Is the disc a newer title? This problem may be solved by software update. Refer to
“Software Update” on page 53.
“BD-ROM Data(USB) Check” message Connect a USB Memory Stick first, then insert the Blu-ray Disc™.
appears when attempting to play a Blu- • When this unit starts loading a Blu-ray Disc™, it will check the USB Memory Stick to
ray Disc™.
which BD-Live™ contents will be saved.
continued on next page
EN
56
Problem
A Music/Photo file does not play.
No return to start-up screen when disc
is removed.
in the upper left hand corner of the
TV screen.
Buttons do not work or the unit stops
responding.
The unit does not respond to some
operating commands during playback.
The unit cannot read Blu-ray Disc™ /
DVD / CD Disc.
Title Repeat cannot be performed
with certain DVDs. (Repeat setting is
cancelled.)
Scene shooting Angle does not switch.
Playback does not start when a Title is
selected.
Cannot play back AVCHD file.
The capacity of the USB Memory Stick
decreased.
Cannot play back a MPEG-2 video and
audio from the USB Memory Stick.
Cannot read the contents on the USB
Memory Stick.
Cannot play back BD-Video.
Repeat setting does not work with a
Blu-ray Disc™
T ip
Confirm that the file type is supported.
Refer to page 20 for the compatible file extentions.
The file may be corrupted.
Check to see if it is playable on a PC or other devices.
Soft Reset this unit by turning it Off for 30 seconds, then On again.
To completely Reset the unit, press and hold [y(POWER/Standby)] on the front
panel for 10 seconds to shut down the unit or unplug the AC Power cord from the AC
outlet for 5-10 seconds.
The operation is not possible.
To soft Reset the unit, press and hold [y(POWER/Standby)] on the front panel
for 10 seconds to shut down the unit or to hard Reset the unit by unplugging the AC
Power cord from the AC outlet for 5-10 seconds.
The operations may be prohibited by the disc. Refer to the instructions for the disc.
Condensation? (Let the unit sit and dry for 1 or 2 hours)
Check to see if the disc is compatible with this unit. (Refer to page 19.)
Wipe dirt off the disc from the center to the outside or replace the disc. Refer to
“Cleaning Discs” on page 62.
Depending on the DVD, there is a possibility that Title Repeat is not available.
Angles cannot be switched for Blu-ray Disc™ / DVD which do not contain multiple
Angles. In some cases multiple Angles are only recorded for specific scenes.
Check the settings in “Parental Control” menu.
This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t) written
to a DVD. The DVD containing AVCHD files must have a proper file and folder
structure meeting AVCHD format specifications. Please use AVCHD compliant
Device / Software to burn or copy AVCHD files to DVD. (Please refer to User
Manuals of the Device / Software for more information.)
Data may be written on the USB Memory Stick when a BD-Video uses the Virtual
Package feature while a USB Memory Stick is connected to the unit.
MPEG-2 is not compatible with this unit.
The USB Memory Stick is not compatible with this unit or the contents may be
damaged.
Turn Off the unit, then turn it back On.
To Soft Reset the unit, press and hold [y(POWER/Standby)] on the front panel
for 10 seconds to Shut Down unit to Standby mode or to Hard Reset the unit by
Unplugging the AC Power cord from the AC outlet for 5-10 seconds.
Connect a USB Memory Stick (1GB or more of available memory). Some discs with
BD-Live™ function require memory when playing back content.
Do not disconnect the USB Memory Stick during playback.
Repeat setting may be unavailable with some Blu-ray™ discs.
continued on next page
EN
57
Problem
Cannot play back 3D.
Cannot load a Blu-ray Disc™ (that is
stuck in Loading mode) and cannot
Open the disc tray to Eject the disc.
Cannot read a USB Memory Stick.
T ip
3D Blu-ray™ discs are not supported by this unit.
Unplug unit from AC outlet for 5-10 seconds. Plug unit back in and press the
[ (OPEN/CLOSE)] on the unit to Eject the disc.
The format of the USB Memory Stick is not compatible with this unit. If the USB
Memory Stick has been formatted on a PC or another device, the file system may be
incompatible with this unit. This unit supports the FAT16 / FAT32 file systems.
Cannot play back Photo files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Make sure that the file extension is .jpg / .JPG / .jpeg / .JPEG. / .png / or .PNG.
Cannot find a Photo file.
Cannot play back Music files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Confirm that the Bitrate and Sampling Frequency are compatible with this unit. (Refer to
page 20)
Cannot find a Music file.
Make sure that the file extension is MP3, AAC or FLAC for Music files.
Music files play choppy.
CDs/DVDs containing FLAC (.flac) files with high frequency and large quantization bit
rates may not play properly. In such cases, copy the Music files to a Blu-ray Disc™ or
USB Memory Stick, then try playing.
No Audio signal from Surround system
of the audio system.
Make sure the audio system is turned On.
Check the Input mode on the audio system if it is on the correct channel.
Check if the Surround system is compatible with either Bitstream or LPCM. If not
sure please check the User Manual or contact the Surround Manufacturer. Once
confirmed check the setting in the “Setup” on this unit.
Increase the volume level on the Surround system.
Cannot connect to the Internet although Make sure that the Ethernet cable is properly connected to the Modem and Router.
the Connection Test passes.
Confirm that another device, such as a PC, can connect to the Internet.
Cannot connect to the Network.
Check to see if the Modem and Router has Power turned On.
Make sure that the Ethernet cable is properly connected to the Modem and Router.
Confirm if the Internet light is showing activity (light blinking) on the Modem and
Router.
Check network settings on the unit.
Turn Off this unit and the Modem and Router (if it has a Power button), then unplug
their AC cords. After 30 seconds, plug them back in and turn the devices back On. If
you have a Telephone / Internet modem with your cable service, then you may have
to use its Reset button or remove the Backup Battery to Reset this type of modem.
Now wait for the lights to show activity and try reconnecting.
Check the cable connection to the Router when connecting with an Ethernet cable.
Confirm “Network Status” in the Setup.
Turn On the DHCP function on the Router.
Cannot use “Auto” to connect to the
Access Point.
If the Access Point's security mode is set to “WEP”, change the setting to
“WPA” or “WPA2 (recommended)”, then try “Auto” again. Refer to “D Note ” on page
44. (For Access Point configuration, please consult its User Manual or Manufacturer.)
Connect the unit to the Access Point using “Scan” or “Manual” mode.
continued on next page
EN
58
Problem
Cannot use the Wireless Connection.
T ip
Once you have activated the Wireless Connection please wait 30 seconds
for the connection to be established after Turning On the unit, before
trying to access Network features such as BD-Live™ and third-party Network
services.
Cannot connect to the Network while
my PC is Connected to the Network.
Check the content of your Internet service contract to see if your Internet Service
Provider prevents multiple terminals connecting at the same time.
You are not sure if the unit is Connected Perform the Connection Test. (refer to page page 41)
to the Internet.
Confirm that the “
” Icon appears right after the unit is turned On. If the Icon
does not appear, the unit is not Connected to the Internet. Review the Connection
Settings.
Cannot use the BD-Live™ function
or Internet data does not download
properly.
Confirm that this unit is successfully Connected to the Internet.
Confirm the BD-Live Connection setting in the Setup.
Connect a USB Memory Stick before inserting a Disc. The USB Memory Stick must
have 1GB or more free space.
Confirm that the USB Memory Stick is properly Connected to this unit. Make sure
that the USB memory stick Connected to this unit is not write-protected.
Cannot add Network Services.
Cannot use Netflix Service.
On this unit, only the Network Services of Netflix, Vudu, and YouTube™ can be
used.
Check to see if the Network Connection is properly made.
Visit www.netflix.com on your PC and become a Netflix member.
The picture quality of Netflix streaming
movie is poor.
Check your Internet connection speed.
Netflix streaming movie often stops or
starts buffering during playback.
Contact your Internet Service Provider. (You may need to improve the broadband
speed.)
Cannot use the VUDU service.
Contact your Internet Service Provider. (You may need to improve the broadband
speed.)
VUDU is only available in the United States.
Check to see if the Network Connection is properly made.
Cannot rent or buy Movies / TV shows
on VUDU.
You need to activate the VUDU account.
The picture quality of VUDU movie is
poor.
Check your Internet connection speed. You need speeds of at least 9 Mbps to this
player for high quality uninterrupted playback.
VUDU movie often stops or starts
buffering during playback.
Check your Internet speed. The following are the required connection speeds for
picture quality for uninterrupted streaming.
SD quality (1 Mbps - 2 Mbps), HD quality (2.25 Mbps - 4.5 Mbps),
HDX quality (4.5 Mbps - 9 Mbps).
Log into your account at http://my.vudu.com and check your payment information.
Can not use the YouTube™ service.
Check to see if the Network Connection is properly made.
No sound with YouTube™.
If this unit is Connected to an AAC-compliant device, the sound may not be output.
In such cases, configure as follows:
“Setup” A “Audio Setting” A “HDMI” A “HDMI” A “PCM”.
The picture quality of the YouTube™
video is poor.
You may experience frequent buffering, distorted pictures or no picture at all
depending on your Network environment and Internet traffic.
The Picture and Sound quality differ depending on the Internet Service Provider.
D Note
• Do not attempt to repair the Blu-ray Disc™ Player yourself. This may cause severe injury, irreparable damage to your Blu-ray
Disc™ Player and void your warranty.
• Please have your Blu-ray Disc™ Player model and serial number available before contacting us. These numbers are available on the
cabinet, as well as on the Packaging.
EN
59
13.
SPECIFICATIONS
Signal system
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
Operating temperature
Operating humidity
General
NTSC Color
120 V AC, 60 Hz
15 W (standby: 0.5 W)
11.1 x 1.7 x 7.9 inches (280.0 x 41.0 x 198.5 mm)
2.2 lbs. (1.0 kg)
41°F (5°C) to 104°F (40°C)
Less than 80 % (no condensation)
Terminals
USB input
TYPE A
HDMI output
HDMI jack x 1
LAN terminal
Wireless LAN (Internal)
Digital Video: 480p, 720p, 1080i, 1080p, 1080p/24
Digital Audio
10BASE-T / 100BASE-TX
IEEE 802.11 b/g/n
D Note
• The Specifications and Design of this product are subject to change without notice.
EN
60
14.
NETWORK SERVICE DISCLAIMER
Content and services made available through this product are transmitted by third parties by means of networks and transmission
facilities over which Company has no control and third party services may be terminated or interrupted at any time, and
Company makes no representation or warranty that any content or service will remain available for any period of time. Without
limiting the generality of this disclaimer, Company expressly disclaims any responsibility for any interruption or suspension of any
content or service made available through this product. Company is not responsible for customer service related to the content
and services. Any question or request for service relating to the content or services should be made directly to the respective
content and service providers.
THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT ARE PROVIDED “AS IS.”
COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE WHATSOEVER.
COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, VALIDITY, TIMELINESS,
LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS PRODUCT.
IN NO EVENT SHALL COMPANY BE LIABLE FOR, ANY DAMAGES, WHETHER ARISING IN CONTRACT OR TORT,
INCLUDING WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
LOST PROFITS, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION
WITH, ANY CONTENT (OR ANY INFORMATION CONTAINED THEREIN) OR SERVICE PROVIDED TO THE USER OR
ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
All content and services accessible through this product belong to third parties and are protected by copyright, patent, trademark
and/or other intellectual property rights. Such content and services are provided solely for the User’s personal noncommercial
use. User may not use any content or services in a manner that has not been authorized by the content owner or service
provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you
may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner
or medium any content or services made available through this product.
EN
61
15.
MAINTENANCE
C Servicing
• Please refer to relevant topics in “TROUBLESHOOTING” on page 56 before returning the product.
• If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Eject the
disc (if possible), disconnect the USB Memory Stick (if connected to the unit), place the unit into Standby mode, unplug the AC
Power cord, and please contact: 1-866-341-3738 or visit : www.magnavox.com/support/
C Cleaning the Cabinet
• Wipe the Front Panel and other exterior surfaces of the unit with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may
discolor the surface or damage the unit.
C Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to outside. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray
intended for analog records.
C Cleaning the Disc Lens
• If this unit still does not perform properly although you referred to relevant sections and “TROUBLESHOOTING” on page 56
in this User Manual, the Laser Optical Pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection
and cleaning of the Laser Optical Pickup unit.
C Disc Handling
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit. Do not attempt
to play such discs, as they may damage the unit.
C IR Signal Check
• If the Remote Control does not work properly, you can test IR signal using a Digital camera or cell phone camera
to see if the Remote Control sends out the infrared signal.
1. Turn On the Digital camera or cell phone camera.
2. Point the Digital camera or cell phone camera towards the front of the Remote Control.
3. Press any arrow Key on the Remote Control and look at the camera Display.
• If a pulsating light appears on the Display the Remote Control is sending out an IR signal.
D Note
• Some Digital Cameras or Smart Phones with Camera(s) may have an IR filter(s) and will not Display the IR signal.
• Remote-control operation on any other Remote Control, such as a universal Remote Control, is not guaranteed.
EN
62
16.
TRADEMARK INFORMATION
“Blu-ray Disc™”, “Blu-ray” and “Blu-ray Disc™” logo are
trademarks of the Blu-ray Disc Association.
“x.v.Color” and “x.v.Color” logo are trademarks of Sony
Corporation.
“BD-Live™” and “BD-Live™” logo are trademarks of the
Blu-ray Disc Association.
is a trademark of DVD Format/Logo Licensing
Corporation.
“BONUSVIEW™” and “BONUSVIEW™” logo are
trademarks of the Blu-ray Disc Association.
AUDIO
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
™
Manufactured under license from Dolby Laboratories. Dolby,
Dolby Audio, and the double-D symbol are trademarks of
Dolby Laboratories.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
Netflix is available in certain countries. Streaming
membership required. More information at
www.netflix.com.
Java and all Java based trademarks and logos are trademarks or
registered trademarks of Oracle and/or its affiliates.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
© 2016 VUDU, Inc. All rights reserved.
YouTube and the YouTube logo are trademarks of Google
Inc.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
continued on next page
EN
63
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE AVC STANDARD
(“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LA, L. L. C. SEE HTTP://WWW.MPEGLA.COM
THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE
VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD
(“VC-1 VIDEO”) AND/OR (ii) DECODE VC-1 VIDEO
THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
EN
64
17.
GLOSSARY
AAC (Advanced Audio Coding)
Cinavia™
AAC is an audio compression method used in the video
compression standards MPEG-2/MPEG-4. In AAC, the audio
can be compressed 1.4 times smaller than MP3, while the
sound quality is equivalent to MP3.
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film and
videos and their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will be displayed and
playback or copying will be interrupted.
More information about Cinavia technology is provided at the
Cinavia Online Consumer Information Center at
http://www.cinavia.com
To request additional information about Cinavia by mail, send
a postcard with your mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San Diego, CA, 92138,
USA.
This product incorporates proprietary technology under
license from Verance Corporation and is protected by U.S.
Patent 7,369,677 and other U.S. and worldwide patents issued
and pending as well as copyright and trade secret protection
for certain aspects of such technology.
Cinavia is a trademark of Verance Corporation. Copyright
2004-2016 Verance Corporation. All rights reserved by
Verance. Reverse engineering or disassembly is prohibited.
AACS
Advanced Access Content System (AACS) is the content
protection scheme used with Blu-ray™ discs.
Analog Audio
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical signal,
but is an indirect representation of sound. See also “Digital
Audio” on page 65.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV screen is
almost twice as wide as its height).
AVCHD
AVCHD is a new format for high definition video camcorders
which can record and play high-resolution HD images.
Default Gateway
IP address of the electronic devices (such as a Router) which
provide Internet access.
BD-Live™
BD-Live™ is a BD-Video (BD-ROM version 2 Profile 2.0)
which contains new functions (e.g. Internet connection), in
addition to the BONUSVIEW™ function.
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals (44,100
times a second for CD audio) by an analog-to-digital converter,
generating a stream of numbers. On playback, a digital-toanalog converter generates an analog signal based on these
numbers. See also “Sampling Frequency” and “Analog Audio”.
Blu-ray Disc™
Blu-ray Disc™ is a next generation optical video disc which
is capable of storing much more data than a conventional
DVD. The large capacity makes it possible to benefit from the
features such as high-definition videos, multi-channel surround
sounds, interactive menus and so on.
Chapter
Just as a book is split up into several chapters, a Title on a BDVideo or DVD-Video is usually divided into chapters. See also
“Title” on page 67.
continued on next page
EN
65
DNS Server
LAN (Local Area Network)
A server which translates Internet domain names into IP
addresses.
A group of computer networks covering a small area like a
company, school or home.
Dolby Audio - Dolby Digital
Local Storage
The system to compress digital sound developed by Dolby
Laboratories. It offers you Stereo Sound (2ch) or multi-channel
audio.
A storage area of sub contents for playing virtual packages on
BD-Video.
Dolby Audio - Dolby Digital Plus
MP3 is a method of compressing files. You can copy MP3 files
on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or USB
Memory Stick from the computer and play back the files on
this unit.
MP3 (MPEG audio layer 3)
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to Dolby
Digital. Blu-ray Disc™ supports 7.1 multi-channel surround
sound output.
Netflix
Dolby Audio - Dolby TrueHD
Netflix is online movie rental service, offering online streaming
to customers in the United States.
Dolby TrueHD is a lossless coding technology developed for
next generation optical discs. Blu-ray Disc™ supports 7.1
multi-channel surround sound output.
PCM (Pulse Code Modulation)
The most common system of encoding digital audio, found
on CD and DAT. Excellent quality, but requires a lot of data
compared to formats such as Dolby Digital and MPEG audio.
For compatibility with digital audio recorders (CD, MD and
DAT) and AV amplifiers with digital Inputs, this unit can
convert Dolby Digital, DTS, and MPEG audio to PCM. See also
“Digital Audio” on page 65.
DTS ® (Digital Theater System)
DTS® is a multi channel surround sound system. You can enjoy
movie dynamic and realistic sound like movie theater. DTS
surround sound technologies were developed by DTS, Inc.
DTS-HD ®
DTS-HD ® is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format. Bluray Disc™ supports 7.1 multi-channel surround sound output.
PNG (Portable Network Graphics)
PNG is a type of bitmap (still picture) file format.
FLAC (Free Lossless Audio Codec)
Proxy Server
FLAC is a type of lossless sound compression file format.
Proxy server is a server which acts as an intermediary
between a workstation user and the Internet to ensure
security.
HDMI (High-Definition Multimedia Interface)
A digital interface between an audio and video Source. It can
transmit component video, audio, and control signal with one
cable connection.
Region Code
A set of numbers which are assigned to devices participating in
a computer network.
Regions associate discs and players with particular areas of the
world. This unit will only play back discs that have compatible
region codes. You can find the region code of your unit by
looking on the rear panel. Some discs are compatible with
more than one region (or all regions).
JPEG (Joint Photographic Experts Group)
Router
JPEG is a method of compressing still picture files. You can
copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or
USB Memory Stick from a computer and play back the files on
this unit.
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.
IP Address
continued on next page
EN
66
Sampling Frequency
The rate which sound is measured by a specified interval to
turn into digital audio data. The numbers of sampling in one
second defines as sampling frequency. The higher the rate, the
better the sound quality.
Subnet Mask
A mask which is used to determine what subnet an IP address
belongs to.
Switch / Hub
A device used for connecting multiple devices to the network.
Title
A collection of chapters on BD-Video or DVD-Video. See also
“Chapter” on page 65.
Track
Audio CD uses Tracks to divide up the content of a disc. The
BD-Video or DVD-Video equivalent is called a Chapter.
See also “Chapter” on page 65.
Virtual Package
The function which copies data to other media (local storage)
from the Internet and plays Secondary Video, Secondary
Audio and Subtitles at the same time. The method of the
playback varies depending on the disc.
VUDU
VUDU is a leading HD on-demand video service which utilizes
the Internet connection to deliver the highest quality ondemand video and Internet applications.
x.v.Color
“x.v.Color” is a promotion name given to the products that
have the capability to realize a wide color space based on the
xvYCC specifications and is a trademark of Sony Corporation.
YouTube™
YouTube™ is one of the video-sharing web sites which you can
view a large number of videos posted on the web site for free.
Not only can you view videos on YouTube™, you can upload
your original video clips and share them with your friends all
over the world.
EN
67
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
Note:
Any product sold and identified as refurbished or renewed carries a ninety (90) days
labor and parts limited warranty.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT
OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE
PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States and Canada.
This warranty only covers failures due to defects in material or workmanship which occur during normal use.
It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or
products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL
PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE
HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT
VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR
NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its
original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE
CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without
prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI CORPORATION
Tel: 1-866-341-3738
www.magnavox.com/support/
19900 Van Ness Ave., Torrance CA 90501
18.
ESPAÑOL
18.1. Mando a Distancia
1
10*
11
2
12
6. Botón BF (REPRODUCIR/PAUSAR)
• Púlselo para iniciar la reproducción.
• Púlselo para pausar la reproducción.
7. Botón
(SALTAR)
• Durante la reproducción, púlselo una vez para volver al
comienzo del título, capítulo, pista o archivo actual.
• Durante la reproducción, pulse dos veces sobre la tecla
para volver al título, capítulo, pista o archivo anterior.
• Durante la reproducción de archivos foto, púlselo para
volver al archivo anterior.
13
3
8. Botón SUBTITLE (Subtítulo)
• Púlselo para seleccionar los subtítulos de un disco.
4
9. Botón AUDIO (Audio)
• Púlselo para seleccionar el canal de sonido (como idiomas
de sonido) de un disco.
14
15
5
6*
7
8
9
10. Botón (ABRIR/CERRAR)
• Púlselo para cerrar o abrir la bandeja para discos.
16
17
18
11. Botón HOME (Inicio)
• Púlselo para mostrar el menú de inicio.
12. Botón POP MENU/MENU (Menú Emergente/Menú)
Blu-ray Disc™: Púlselo para mostrar el menú emergente.
DVD: Púlselo para mostrar el menú del disco.
19*
13. Botón OK
• Púlselo para confirmar o seleccionar elementos de menú.
14. Botón RETURN (Retorno)
• Púlselo para volver a la pantalla de funciones o menú
mostrado anteriormente.
15. Botones de RED / GREEN / BLUE / YELLOW
(ROJO / VERDE / AZUL / AMARILLO)
• Púlselos para activar las teclas de atajo en algunas
funciones de BD-vídeo.
* La unidad también se puede encender pulsando estos
botones.
16. Botón
(ADELANTAR)
• Durante la reproducción, púlselo para avanzar rápido la
reproducción.
• Cuando la reproducción esté en pausa, púlselo para
avanzar lentamente la reproducción.
1. Botón (ENCENDIDO)
• Pulse el botón para encender la unidad, o para pasar la
unidad al modo de espera. (Para apagar completamente
la unidad, debe desconectar el cable de alimentación de
CA.)
17. Botón (DETENER)
• Púlselo para detener la reproducción.
2. Botón TOP MENU (Menú Superior)
Blu-ray Disc™: Púlselo para mostrar el menú superior.
DVD: Púlselo para mostrar el menú de títulos.
(SALTAR)
18. Botón
• Durante la reproducción, púlselo para saltar al siguiente
capítulo, pista o archivo.
• Cuando la reproducción esté en modo de pausa, púlselo
para avanzar la reproducción imagen a imagen.
3. Botones de
(CURSOR)
• Púlselos para seleccionar elementos o configuraciones.
4. Botón MODE (Modo)
• Durante la reproducción, presione para mostrar el
Menú de Reproducción para configurar las funciones de
reproducción tales como Búsqueda, Repetir, Ángulo, etc.
19. Botón YouTube / NETFLIX / VUDU
• Presione para Lanzar VOD.
D Nota
• Use el control remoto suministrado. No se garantiza la
operación de control remoto en cualquier otro control
remoto, tal como un control remoto universal.
5. Botón
(REVERSO)
• Durante la reproducción, púlselo para invertir rápido la
reproducción.
Continua en la página siguiente
ES
69
18.2. Encontrar el HDMI en su Televisor
Revise los siguientes pasos despues de haber completado todas las conexiones a su TV.
1. Presione [
(ENCENDIDO)] para Encender la unidad.
2. Encienda su televisor.
3. Cambia la entrada de su TV al puerto HDMI al que está conectado su unidad.
Ésta es la vista de Entrada HDMI correcta.
• Puede tomar unos momentos para que aparezca la pantalla de Menú.
• Cuando se enciende esta unidad por primera vez, aparecerá la pantalla “Instalacion Inicial”.
ES
70
18.3. Instalacion Inicial
Por favor, siga las instrucciones que se exponen a continuacion para completar la configuracion inicial.
1. Mientras se muestra la pantalla de bienvenida, presione [OK].
2. Aparece la pantalla de configuracion del idioma. Utilice [
Page: 2/4
Language Setting
] para seleccionar su idioma y pulse luego [OK].
Easy Setup
English
Français
Choose OSD language for all OSD windows,
menu, etc...
Español
Previous
3.
Next
Aparecerá la pantalla de configuración fun-Link (HDMI CEC). Use [
] ara seleccionar “Enc.” o “Apdo.”, después presione
[OK].
4.
Aparecerá la pantalla de configuración de red. Use [
] para seleccionar “Configurar ahora” o “Más tarde”, después presione
[OK].
• Si selecciona “Configurar ahora”, consulte “Conexión de Red” en la página page 41 para la operación adicional.
• Si selecciona “Más tarde”, aparecerá la pantalla de Menú de inicio.
C Cómo restablecer el Idioma OSD
Puede restablecer el idioma OSD si seleccionó el ajuste de idioma equivocado.
1. Presione [HOME] para desplegar el Menú de Inicio.
2. Utilice [
] para seleccionar “
”, despés presione [OK].
• Esta partida es “Setup” (inglés) / “Instalación” (español) / “Installation” (francés).
• A partir de aquí, por favor seleccione una de las siguientes partidas que puede encontrar en la pantalla:
3. Utilice [
] para seleccionar “
4. Utilice [
] para seleccionar “Language” (inglés) / “Idioma” (español) / “Langue” (francés), y después presione [OK].
5. Utilice [
] para seleccionar “OSD” (inglés) / “OSD” (español) / “Affi chage sur l’écran” (francés), y después presione [OK].
6. Utilice [
] para seleccionar el idioma que desee, después presione [OK].
”, despés presione [OK].
7. Si las partidas de ajuste se despliegan en el idioma que seleccionó, presione [HOME] para salir.
ES
71
GARANTÍA LIMITADA
FUNAI CORP. reparará este producto, de forma gratuita en Estados Unidos, en caso de defecto de materiales o fabricación, del modo
siguiente:
DURACIÓN:
PIEZAS:
FFUNAI CORP. suministrará piezas de repuesto de las piezas defectuosas de forma gratuita durante un (1) año
desde la fecha de compra minorista original. Ciertas piezas están excluidas de esta garantía.
MANO DE OBRA: FUNAI CORP. suministrará la mano de obra de forma gratuita durante un periodo de noventa (90) días desde la
fecha de compra minorista original.
Nota:
Cualquier producto vendido e identificado como reacondicionado tiene una garantía limitada de
noventa (90) días en mano de obra y partes.
LÍMITES Y EXCLUSIONES:
ESTA GARANTÍA SE EXTIENDE SOLAMENTE AL COMPRADOR MINORISTA ORIGINAL. UN RECIBO DE COMPRA U OTRA
PRUEBA DE COMPRA MINORISTA ORIGINAL SERÁ EXIGIDA JUNTO CON EL PRODUCTO PARA OBTENER SERVICIO BAJO
ESTA GARANTÍA.
Esta garantía no se extenderá a ninguna otra persona o beneficiario.
Esta garantía quedará invalidada y sin efecto en caso de alteración, sustitución, borrado o pérdida de los números de serie del producto
o si se intentó una reparación por parte de un centro de servicio no autorizado.
Esta garantía limitada no aplica a ningún producto no comprado y usado en los Estados Unidos y Canadá. Esta garantía solamente cubre
los fallos debidos a defectos de material o fabricación que se produzcan durante su uso normal. No cubre daños producidos durante el
transporte, ni daños ocasionados por reparaciones, alteraciones o productos no suministrados por FUNAI CORP., o daños resultantes
de accidente, uso indebido, abuso, trato indebido, aplicación indebida, alteración, instalación defectuosa, mantenimiento inadecuado,
uso comercial (por ejemplo, el uso de este producto en hoteles, establecimientos de alquiler u oficinas)o daños resultantes de incendio,
inundación, tormenta eléctrica o catástrofes naturales.
ESTA GARANTÍA NO CUBRE LOS MATERIALES DE EMBALAJE, NINGÚN TIPO DE ACCESORIOS (EXCEPTO EL MANDO A
DISTANCIA), NINGUNA PIEZA DE ADORNO, PIEZAS DE MONTAJE COMPLETAS, MODELOS DE DEMOSTRACIÓN O DE
TALLER.
FUNAI CORP. Y SUS REPRESENTANTES O AGENTES NO SERÁN EN NINGÚN CASO CONSIDERADOS RESPONSABLES
DE DAÑOS GENERALES, INDIRECTOS O CONSECUENCIALES, RESULTANTES DE O PROVOCADOS POR EL USO O LA
IMPOSIBILIDAD DE USO DE ESTE PRODUCTO. ESTA GARANTÍA SUSTITUYE A CUALQUIER OTRA GARANTÍA, EXPRESA
O IMPLÍCITA, Y CUALQUIER OTRA RESPONSABILIDAD CIVIL POR PARTE DE FUNAI, CUALQUIER OTRA GARANTÍA QUE
INCLUYA LA GARANTÍA DE COMERCIABILIDAD E IDONEIDAD PARA UN FIN CONCRETO, QUEDAN POR LA PRESENTE
EXCLUIDAS POR DE FUNAI Y SUS REPRESENTANTES EN ESTADOS UNIDOS.
TODAS LAS INSPECCIONES Y REPARACIONES BAJO GARANTÍA DEBEN SER EFECTUADAS POR UN CENTRO DE SERVICIO
AUTORIZADO.
ESTA GARANTÍA ES VÁLIDA EXCLUSIVAMENTE CUANDO EL APARATO SEA ENTREGADO A UN CENTRO DE SERVICIO
AUTORIZADO.
EL PRODUCTO DEBE IR ACOMPAÑADO POR UNA COPIA DEL RECIBO DE COMPRA MINORISTA ORIGINAL.
SI NO SE ADJUNTA PRUEBA DE COMPRA, LA GARANTÍA NO SE APLICARÁ Y SE COBRARÁN LOS COSTES DE LA
REPARACIÓN.
IMPORTANTE:
ESTA GARANTÍA LIMITADA LE OTORGA DERECHOS LEGALES ESPECÍFICOS. ES POSIBLE QUE SEA USTED
BENEFICIARIO DE OTROS DERECHOS QUE VARÍEN DE UN ESTADO A OTRO. SI, EN CUALQUIER MOMENTO DURANTE
EL PERIODO DE GARANTÍA, NO PUEDE USTED OBTENER SATISFACCIÓN CON RESPECTO A LA REPARACIÓN DE ESTE
PRODUCTO, LE ROGAMOS QUE SE PONGA EN CONTACTO CON FUNAI CORP.
ATENCIÓN:
FUNAI CORP. SE RESERVA EL DERECHO DE MODIFICAR CUALQUIER DISEÑO DE ESTE PRODUCTO SIN PREVIO AVISO.
DECLARACIÓN DE GARANTÍA CON RESPECTO A REPARACIONES NO AUTORIZADAS:
Para obtener servicio de garantía, debe usted aceptar el producto, o hacer entrega del producto con portes pagados, ya sea
en su embalaje original o en un embalaje que proporcione el mismo grado de protección, a cualquier CENTRO DE SERVICIO
AUTORIZADO. FUNAI CORP. no efectuará reembolso por ningún servicio realizado por proveedores de servicio no autorizados sin
autorización previa por escrito.
Para localizar su CENTRO DE SERVICIO AUTORIZADO más próximo o para solicitudes generales de servicio,
puede ponerse en contacto con nosotros en:
FUNAI CORPORATION
Tel: 1-866-341-3738
www.magnavox.com/support/
19900 Van Ness Ave., Torrance CA 90501
★★★★★
ECR03UH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising