Intel Server Board S5000VSA
®
Intel Server Board S5000VSA
Technical Product Specification
Intel order number – D36978-004
Revision 1.0
April 2006
Enterprise Platforms and Services Division - Marketing
Revision History
Intel® Server Board S5000VSA TPS
Revision History
Date
April 2006
Revision
Number
1.0
Modifications
Initial external release.
Revision 1.0
ii
Intel order number – D36978-004
Intel® Server Board S5000VSA
Disclaimers
Disclaimers
Information in this document is provided in connection with Intel® products. No license, express
or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel
assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not intended for use in medical, life saving, or life sustaining
applications. Intel may make changes to specifications and product descriptions at any time,
without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked
"reserved" or "undefined." Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. Do not
finalize a design with this information. Revised information will be published when the product
is available. Verify with your local sales office that you have the latest datasheet before
finalizing a design.
The Intel® Server Board S5000VSA may contain design defects or errors known as errata which
may cause the product to deviate from published specifications. Current characterized errata
are available on request.
Intel Corporation server baseboards contain a number of high-density VLSI and power delivery
components that need adequate airflow to cool. Intel’s own chassis are designed and tested to
meet the intended thermal requirements of these components when the fully integrated system
is used together. It is the responsibility of the system integrator that chooses not to use Intel
developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of air flow required for their specific application and environmental
conditions. Intel Corporation can not be held responsible if components fail or the server board
does not operate correctly when used outside any of their published operating or non-operating
limits.
Intel, Pentium, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation.
*Other brands and names may be claimed as the property of others.
Copyright © Intel Corporation 2006.
iii
Revision 1.0
Intel order number – D36978-004
Table of Contents
Intel® Server Board S5000VSA TPS
Table of Contents
1.
2.
3.
Introduction ........................................................................................................................ 11
1.1
Chapter Outline...................................................................................................... 11
1.2
Server Board Use Disclaimer ................................................................................ 11
Intel® Server Board S5000VSA Overview ......................................................................... 12
2.1
Intel® Server Board S5000VSA Feature Set.......................................................... 12
2.2
Server Board Layout.............................................................................................. 13
2.2.1
Server Board Connector and Component Layout.................................................. 13
2.2.2
Server Board Mechanical Drawings ...................................................................... 15
2.2.3
Server Board ATX I/O Layout ................................................................................ 18
Functional Architecture ..................................................................................................... 19
3.1
3.1.1
Processor Sub-system........................................................................................... 20
3.1.2
Memory Sub-system .............................................................................................. 22
3.2
4.
S5000V Controller Hub (MCH) .............................................................................. 20
Enterprise South Bridge (ESB2-E) ........................................................................ 24
3.2.1
PCI Sub-system..................................................................................................... 25
3.2.2
SATA Support........................................................................................................ 25
3.2.3
Parallel ATA (PATA) Support ................................................................................ 26
3.2.4
USB 2.0 Support.................................................................................................... 27
3.3
Video Support ........................................................................................................ 27
3.4
Network Interface Controller (NIC) ........................................................................ 29
3.5
Super I/O ............................................................................................................... 30
Platform Management........................................................................................................ 32
4.1
Power Button ......................................................................................................... 32
4.2
Sleep States Supported......................................................................................... 32
4.2.1
S0 State ................................................................................................................. 32
4.2.2
S1 State ................................................................................................................. 32
4.2.3
S4 State ................................................................................................................. 33
4.2.4
S5 State ................................................................................................................. 33
4.3
Wakeup Events...................................................................................................... 33
4.3.1
Wakeup from S1 Sleep State ................................................................................ 33
4.3.2
Wakeup from S3 Sleep State (BFAD Workstation Only) ....................................... 33
4.3.3
Wakeup from S4 and S5 States ............................................................................ 33
Revision 1.0
iv
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
4.4
AC Power Failure Recovery .................................................................................. 33
4.5
PCI PM Support..................................................................................................... 33
4.5.1
RESET# Control .................................................................................................... 34
4.5.2
PCI Vaux................................................................................................................ 34
4.6
4.6.1
5.
7.
8.
System Management ............................................................................................. 34
CPU Thermal Management ................................................................................... 34
4.7
System Fan Operation........................................................................................... 35
4.8
Light Guided Diagnostics - System Status and FRU LEDs ................................... 35
Connector / Header Locations and Pin-outs.................................................................... 37
5.1
Board Connector Information................................................................................. 37
5.2
Power Connectors ................................................................................................. 38
5.3
Control Panel Connector ....................................................................................... 39
5.4
I/O Connectors....................................................................................................... 40
5.4.1
VGA Connector...................................................................................................... 40
5.4.2
NIC Connectors ..................................................................................................... 41
5.4.3
ATA-100 Connector ............................................................................................... 42
5.4.4
SATA Connectors .................................................................................................. 43
5.4.5
Serial Port Connectors........................................................................................... 43
5.4.6
Keyboard and Mouse Connector ........................................................................... 44
5.4.7
USB Connector...................................................................................................... 45
5.5
6.
Table of Contents
Fan Headers .......................................................................................................... 46
Jumper Block Settings ...................................................................................................... 47
6.1
Recovery Jumper Blocks ....................................................................................... 47
6.2
BIOS Select Jumper .............................................................................................. 48
6.3
Other Configuration Jumpers................................................................................. 48
Light Guided Diagnostics.................................................................................................. 49
7.1
5 V STBY ............................................................................................................... 49
7.2
Fan Fault LEDs...................................................................................................... 49
7.3
System ID LED, System Status LED and Post Code Diagnostic LEDs................. 49
7.4
DIMM Fault LEDs .................................................................................................. 49
7.5
Processor Fault LEDs............................................................................................ 51
Design and Environmental Specifications....................................................................... 52
8.1
Server Board Design Specification ........................................................................ 52
8.2
Processor Power Support...................................................................................... 53
8.3
Power Supply Specifications ................................................................................. 53
Revision 1.0
v
Intel order number – D36978-004
Table of Contents
9.
Intel® Server Board S5000VSA TPS
8.3.1
Output Power / Currents ........................................................................................ 54
8.3.2
Grounding .............................................................................................................. 55
8.3.3
Standby Outputs .................................................................................................... 55
8.3.4
Remote Sense ....................................................................................................... 55
8.3.5
Voltage Regulation ................................................................................................ 55
8.3.6
Dynamic Loading ................................................................................................... 56
8.3.7
Capacitive Loading ................................................................................................ 56
8.3.8
Closed loop stability............................................................................................... 56
8.3.9
Common Mode Noise ............................................................................................ 56
8.3.10
Ripple / Noise ........................................................................................................ 57
8.3.11
Timing Requirements............................................................................................. 57
8.3.12
Residual Voltage Immunity in Standby mode ........................................................ 59
Regulatory and Certification Information......................................................................... 60
9.1
Product Regulatory Compliance ............................................................................ 60
9.1.1
Product Safety Compliance ................................................................................... 60
9.1.2
Product EMC Compliance – Class A Compliance ................................................. 61
9.1.3
Certifications / Registrations / Declarations ........................................................... 61
9.2
Product Regulatory Compliance Markings ............................................................ 62
9.3
Electromagnetic Compatibility Notices .................................................................. 63
9.3.1
FCC Verification Statement (USA) ........................................................................ 63
9.3.2
ICES-003 (Canada) ............................................................................................... 63
9.3.3
Europe (CE Declaration of Conformity) ................................................................. 64
9.3.4
VCCI (Japan) ......................................................................................................... 64
9.3.5
BSMI (Taiwan) ....................................................................................................... 64
9.3.6
RRL (Korea)........................................................................................................... 64
9.3.7
CNCA (CCC-China) ............................................................................................... 65
9.4
Restriction of Hazardous Substances (RoHS) Compliance................................... 65
Appendix A: Integration and Usage Tips................................................................................ 66
Appendix B: Sensor Tables ..................................................................................................... 67
Appendix C: POST Code Diagnostic LEDs............................................................................. 77
Glossary..................................................................................................................................... 81
Reference Documents .............................................................................................................. 84
Revision 1.0
vi
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
List of Figures
List of Figures
Figure 1. Major Board Components............................................................................................ 14
Figure 2. Intel® Server Board S5000VSA – Key Connectors and LED Indicators ...................... 15
Figure 3. Intel® Server Board S5000VSA – Mounting Hole Locations ........................................ 16
Figure 4. Intel® Server Board S5000VSA – Duct keepout Detail ................................................ 17
Figure 5. Intel® Server Board S5000VSA ATX I/O Layout .......................................................... 18
Figure 6. Intel® Server Board S5000VSA Functional Block Diagram.......................................... 19
Figure 7. CEK Processor Mounting ............................................................................................ 21
Figure 8. Minimum Two DIMM Memory Configuration................................................................ 24
Figure 9. Recommended Four DIMM Configuration ................................................................... 24
Figure 10. Recovery Jumper Blocks (J1J1, J1J2) ..................................................................... 47
Figure 11. BIOS Select Jumper (J3H1) ...................................................................................... 48
Figure 12. System ID LED and System Status LED Locations................................................... 49
Figure 13. DIMM Fault LED Locations........................................................................................ 50
Figure 14. Processor Fault LED Locations ................................................................................. 51
Figure 15. Output Voltage Timing .............................................................................................. 58
Revision 1.0
vii
Intel order number – D36978-004
List of Tables
Intel® Server Board S5000VSA TPS
List of Tables
Table 1. Processor Support Matrix ............................................................................................. 20
Table 2. I2C Addresses for Memory Module SMB ..................................................................... 22
Table 3. Maximum 8 DIMM System Memory Configruation – x8 Single Rank ........................... 23
Table 4. Maximum 8 DIMM System Memory Configuration – x4 Dual Rank .............................. 23
Table 5. Video Modes ................................................................................................................. 28
Table 6. Video Memory Interface................................................................................................ 28
Table 7. NIC Status LED............................................................................................................. 29
Table 8. Serial A Header Pin-out ................................................................................................ 31
Table 9 Summary of LEDs on the Intel® Server Board S5000VSA............................................. 36
Table 10. Board Connector Matrix .............................................................................................. 37
Table 11. Power Connector Pin-out (J9C1) ................................................................................ 38
Table 12. 12V Power Connector Pin-out (J4K1)......................................................................... 38
Table 13. Power Supply Signal Connector Pin-out (J1K1) ......................................................... 39
Table 14. Front Panel SSI Standard 24-pin Connector Pin-out (J1F1)....................................... 39
Table 15. VGA Connector Pin-Out (J7A1) .................................................................................. 40
Table 16. RJ-45 10/100/1000 NIC Connector Pin-Out (JA6A1, JA6A2) ..................................... 41
Table 17. ATA-100 44-pin Connector Pin-out (J2K3) ................................................................. 42
Table 18. SATA Connector Pin-Out (J1K3, J1J7, J1J4, J1H3, J1H1, J1G6).............................. 43
Table 19. External RJ-45 Serial B Port Pin-Out (J9A2) .............................................................. 43
Table 20. Internal 9-pin Serial A Header Pin-Out (J1B1)............................................................ 44
Table 21. Stacked PS/2 Keyboard and Mouse Port Pin-Out (J9A1)........................................... 44
Table 22. External USB Connector Pin-Out (JA6A1, JA6A2) ..................................................... 45
Table 23. Internal USB Connector Pin-Out (J1J8)...................................................................... 45
Table 24. SSI Fan Connector Pin-out (J9K1,J5K1,J1K4, J1K5, J2K2, J2K5, J9B1, J9B2) ........ 46
Table 25. Recovery Jumpers (J1J1, J1J2) ................................................................................. 47
Table 26: Board Design Specifications ....................................................................................... 52
Table 27. Dual-Core Intel® Xeon® processor 5000 sequence DP TDP Guidelines .................... 53
Table 28. Load Ratings............................................................................................................... 54
Table 29. Transient Load Requirements.................................................................................... 56
Table 30. Capacitive Loading Conditions .................................................................................. 56
Table 31. Ripple and Noise........................................................................................................ 57
Table 32. Output Voltage Timing ............................................................................................... 57
Revision 1.0
viii
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
List of Tables
Table 33. Turn On / Off Timing .................................................................................................. 58
Table 34. BMC Sensors.............................................................................................................. 68
Table 35: POST Progress Code LED Example .......................................................................... 77
Table 36: Diagnostic LED POST Code Decoder ........................................................................ 78
Revision 1.0
ix
Intel order number – D36978-004
List of Tables
Intel® Server Board S5000VSA TPS
< This page intentionally left blank. >
Revision 1.0
x
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
1.
Introduction
Introduction
This Technical Product Specification (TPS) provides board specific information detailing
features, functionality, and high level architecture of the Intel® Server Board S5000VSA. The
Intel® S5000 Server Board Family Datasheet should also be referenced for more in depth detail
of various board sub-systems including Chipset, BIOS, and system management.
In addition, design level information for specific sub-systems can be obtained by ordering the
External Product Specifications (EPS) or External Design Specifications (EDS) for a given subsystem. EPS and EDS documents are not publicly available and must be ordered through your
local Intel representative.
1.1 Chapter Outline
This document is divided into the following chapters
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Chapter 1 – Introduction
Chapter 2 – Intel® Server Board S5000VSA Overview
Chapter 3 – Functional Architecture
Chapter 4 – Platform Management
Chapter 5 – Connector/Header Location and Pin-out
Chapter 6 – Configuration Jumpers
Chapter 7 – Light Guided Diagnostics
Chapter 8 – Design and Environmental Specifications
Chapter 9 – Regulatory and Certification Information
Appendix A – Integration and Usage Tips
Appendix B – Sensor Tables
Appendix C – POST Code Diagnostic LEDs
1.2 Server Board Use Disclaimer
Intel Corporation server boards contain a number of high-density VLSI and power delivery
components that need adequate airflow to cool. Intel ensures through its own chassis
development and testing that when Intel server building blocks are used together, the fully
integrated system will meet the intended thermal requirements of these components. It is the
responsibility of the system integrator who chooses not to use Intel developed server building
blocks to consult vendor datasheets and operating parameters to determine the amount of air
flow required for their specific application and environmental conditions. Intel Corporation
cannot be held responsible if components fail or the server board does not operate correctly
when used outside any of their published operating or non-operating limits.
Revision 1.0
11
Intel order number – D36978-004
Intel® Server Board S5000VSA Overview
2.
Intel® Server Board S5000VSA TPS
Intel® Server Board S5000VSA Overview
The Intel® Server Board S5000VSA is a monolithic printed circuit board with features that were
designed to support the pedestal server markets.
2.1 Intel® Server Board S5000VSA Feature Set
Feature
Processors
Description
®
®
771-pin LGA sockets supporting 1 or 2 Dual-Core Intel Xeon processors 5000
sequence, with system bus speeds of 1066 MHz or 1333 MHz
Memory
Maximum support for 16GB. Four or eight (based on board SKU type) DIMM slots
supporting fully buffered DIMM technology (FBDIMM) memory. 240-pin DDR2-533 and
DDR2-667 FBDIMMs may be used. Note: Full DIMM heat spreaders are required.
Chipset
Intel® S5000V chipset, including:
®
Intel S5000V MCH
®
Intel ESB2-E
I/O Control
External connections:
ƒ Stacked PS/2* ports for keyboard and mouse
ƒ DB9 Serial port
ƒ Two RJ45 NIC connectors for 10/100/1000 Mb connections
ƒ Seven USB 2.0 ports (4 rear, 2 front, 1 floppy)
Internal Connections:
ƒ 1 RS-232 Serial
ƒ 1 P-ATA133
ƒ Six SATA (300MB) connectors with integrated RAID 0/1/5/10 support
ƒ SSI-compliant front panel header
ƒ SSI-compliant 24-pin main power connector, supporting the ATX-12V standard on
the first 20 pins.
Video
On-board ATI* ES1000 video controller with 16MB DDR SDRAM external video
memory
Hard Drives
Support for six SATA-300 hard drives
LAN
Intel® 82563EB dual port controller for 10/100/1000 Mbit/sec Ethernet LAN connectivity
Fans
Support for two processor fans, five system fans, and one memory fan
System Management
Support for Intel® System Management Software
Revision 1.0
12
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Intel® Server Board S5000VSA Overview
2.2 Server Board Layout
2.2.1
Server Board Connector and Component Layout
The following figure shows the board layout of the server board. Each connector and major
component is identified by a number or letter and is identified below the figure.
A
B
C D
E
F
UU
TT
G
HI
J
K
SS
L
RR
M
QQ
PP
N
OO
NN
MM
LL
KK
JJ
II
HH
GG
O
P
Q
R
EE CCAA X W
FF DD BB Z Y
VUT
S
AF000173
Revision 1.0
13
Intel order number – D36978-004
Intel® Server Board S5000VSA Overview
A. PCI 32/33 Slot 1
D. PCI-X* 64/100 Slot 5
G. Diagnostic LEDs
J. System Fan 6
M. Auxiliary Signal Connector
P. Processor 2 Socket
S. Processor Voltage Regulator
V. IPMB Header
Y. LCP Header
BB. System Fan 3
EE. System Fan 1
HH. SATA 0 Connector
KK. SATA 3/SAS 1 Connector
NN. Backplane Connector B
QQ. USB 6
TT. Serial B EMP Connector
B. PCI Express* x4 Slot 3
E. PCI Express* x4 Slot 6
H. System ID LED
K. System Fan 5
N. DIMM Sockets
Q. Processor Fan 2 Header
T. Battery
W. SAS RAID5 Key
Z. SAS_SES2
CC. System Fan 4
FF. SATA SGPIO
II. SATA 1 Connector
LL. SATA 4/SAS 2 Connector
OO. Front Panel Header
RR. SATA RAID5 Key
UU. Chassis Intrusion
Intel® Server Board S5000VSA TPS
C. PCI-X* 64/133 Slot 4
F. Back Panel I/O Ports
I. System Status LED
L. Main Power Connector
O. Processor 1 Socket
R. Processor Fan 1 Header
U. Processor Power Connector
X. IDE Connector
AA. SAS SGPIO
DD. System Fan 2
GG. USB 4-5
JJ. SATA 2/SAS 0 Connector
MM. SATA 5/SAS 3 Connector
PP. Backplane Connector A
SS. Speaker
Figure 1. Major Board Components
Revision 1.0
14
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
2.2.2
Intel® Server Board S5000VSA Overview
Server Board Mechanical Drawings
Figure 2. Intel® Server Board S5000VSA – Key Connectors and LED Indicators
Revision 1.0
15
Intel order number – D36978-004
Intel® Server Board S5000VSA Overview
Intel® Server Board S5000VSA TPS
Figure 3. Intel® Server Board S5000VSA – Mounting Hole Locations
Revision 1.0
16
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Intel® Server Board S5000VSA Overview
Figure 4. Intel® Server Board S5000VSA – Duct keepout Detail
Revision 1.0
17
Intel order number – D36978-004
Intel® Server Board S5000VSA Overview
2.2.3
Intel® Server Board S5000VSA TPS
Server Board ATX I/O Layout
The drawing below shows the layout of the rear I/O components for the server board.
Figure 5. Intel® Server Board S5000VSA ATX I/O Layout
Revision 1.0
18
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
3.
Functional Architecture
Functional Architecture
The architecture and design of the Intel® Server Board S5000VSA is based on the Intel®
S5000V Chipset. The chipset is designed for systems based on the Intel processor code named
“Dempsey/Woodcrest” and supports FSB frequencies of 1066 MTS/1333 MTS. The chipset
contains two main components: the Memory Controller Hub (MCH) for the host bridge, and the
I/O controller hub for the I/O subsystem. The Intel® S5000V chipset uses the Enterprise South
Bridge (ESB2-E) for the I/O controller hub. This chapter provides a high-level description of the
functionality associated with each chipset component and the architectural blocks that make up
the Intel® Server Board S5000VSA. For more detailed descriptions for each of the functional
architecture blocks, see the Intel® S5000 Server Board Family Datasheet.
Figure 6. Intel® Server Board S5000VSA Functional Block Diagram
Revision 1.0
19
Intel order number – D36978-004
Functional Architecture
Intel® Server Board S5000VSA TPS
3.1 S5000V Controller Hub (MCH)
The S5000V Memory Controller Hub (MCH) chip is packaged in a 1432 pin FCBGA package. It
supports the Dual-Core Intel® Xeon® processor 5000 sequence (1067 MTS/1333 MTS)
package. This package uses the matching LGA771 socket.
3.1.1
Processor Sub-system
The MCH supports a FSB frequency of 267MHz/333MHz (1067 MTS/1333 MTS) using a point
to point dual inline bus (DIB) processor system bus interface. Each processor FSB supports
peak address generation rates of 133 million addresses per second. Both FSB data buses are
quad pumped 64-bits which allow peak bandwidths of 8.5GB/s (1067MT/s) or 10.7GB/s
(1333MT/s) depending on the processor used.
The support circuitry for the processor sub-system consists of the following:
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Dual LGA771 zero insertion force (ZIF) processor sockets
Processor host bus AGTL+ support circuitry
Reset configuration logic
Processor module presence detection logic
BSEL detection capabilities
CPU signal level translation
Common Enabling Kit Direct Chassis Attach (CEK DCA) CPU retention support
For detailed information about the functional architecture provided by the chipset, see the Intel®
S5000 Server Board Family Datasheet.
3.1.1.1
Processor Support
The server board supports one or two Dual-Core Intel® Xeon® processors 5000 sequence
utilizing a 667MHz/1067MHz/1333MHz front side bus with frequencies starting at 2.67 GHz.
Previous generations of the Intel® Xeon® processor are not supported on the server board. See
the following table for a list of supported processors.
Table 1. Processor Support Matrix
Processor Family
Intel® Xeon® processor
Intel® Xeon® processor
Dual-Core Intel® Xeon® processor 5030
Dual-Core Intel® Xeon® processor 5050
Dual-Core Intel® Xeon® processor 5060
Dual-Core Intel® Xeon® processor 5063
Dual-Core Intel® Xeon® processor 5080
Dual-Core Intel® Xeon® processor 51xx
System Bus
Speed
533 MHz
800 MHz
667 MHz
667 MHz
1066 MHz
1066 MHz
1066 MHz
1333/1066
MHz
Core Frequency
All
All
2.67 GHz
3.0 GHz
3.2 GHz
3.2 GHz
3.73 GHz
TBD
Cache
2x 2 MB
2x 2 MB
2x 2 MB
2x 2 MB
2x 2 MB
TBD
Watts
Support
95
95
130
95
130
TBD
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Revision 1.0
20
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
3.1.1.2
Functional Architecture
Processor Population Rules
When two processors are installed, both must be of identical revision, core voltage, and
bus/core speed. When only one processor is installed, it must be in the socket labeled CPU1.
The other socket must be empty.
Processors must be populated in sequential order. Processor socket 1 (CPU1) must be
populated before processor socket 2 (CPU2).
The board is designed to provide up to 130A of current per processor. Processors with higher
current requirements are not supported.
No terminator is required in the second processor socket when using a single processor
configuration.
3.1.1.3
Common Enabling Kit (CEK) Design Support
The server board complies with Intel’s Common Enabling Kit (CEK) processor mounting and
heat sink retention solution. The server board ships with a CEK spring snapped onto the
underside of the server board, beneath each processor socket. The heat sink attaches to the
CEK, over the top of the processor and the thermal interface material (TIM). See the figure
below for the stacking order of the chassis, CEK spring, server board, TIM, and heat sink.
The CEK spring is removable, allowing for the use of non-Intel heat sink retention solutions.
Heatsink assembly
Thermal interface material (TIM)
Server board
CEK spring
Chassis
Figure 7. CEK Processor Mounting
Revision 1.0
21
Intel order number – D36978-004
Functional Architecture
3.1.2
Intel® Server Board S5000VSA TPS
Memory Sub-system
The MCH masters two fully buffered DIMM (FBDIMM) memory channels. FBDIMM memory
utilizes a narrow high speed frame oriented interface referred to as a channel. On the server
board, the two channels are routed to eight DIMM slots and are capable of supporting
registered DDR2-533 and DDR2-667 FBDIMM memory (stacked or unstacked). Peak FBDIMM
memory data bandwidth in dual channel mode is 6.4GB/s (2x3.2GB/s) with DDR2-533/PC24200 (3.75ns@CL4) and 8.0GB/s (2x4.0GB/s) with DDR2-667/PC2-5300 (3.0ns@CL5).
DIMM B4
DIMM B3
DIMM B2
DIMM B1
DIMM A4
DIMM A3
DIMM A2
DIMM A1
MCH
Channel
A
Channel
B
To boot the system, the system BIOS on the server board uses a dedicated I2C bus to retrieve
DIMM information needed to program the MCH memory registers. The following table provides
the I2C addresses for each DIMM slot.
Table 2. I2C Addresses for Memory Module SMB
Device
DIMM A1
Address
0xA0
DIMM A2
0xA2
DIMM A3
0xA4
DIMM A4
0xA6
DIMM B1
0xA0
DIMM B2
0xA2
DIMM B3
0xA4
DIMM B4
0xA6
Revision 1.0
22
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
3.1.2.1
Functional Architecture
Supported Memory
The server board supports up to eight (four for the 4-DIMM SKU) DDR2-533 or DDR2-667 Fully
Buffered DIMM memory (FBDIMM memory). DDR2 DIMMS that are not Fully Buffered are NOT
supported on this server board. The following tables show the maximum memory configurations
supported using specified memory technology.
Table 3. Maximum 8 DIMM System Memory Configruation – x8 (width) Single Rank = 1 load
DRAM Technology x8
Single Rank (64M8=64M x
8b=16M x 8b x 4 banks)
512 Mb (Density)
Maximum Capacity
2 GB
Table 4. Maximum 8 DIMM System Memory Configuration – x4 (width) Dual Rank = 2 loads
DRAM Technology x4
Dual Rank(128M4=128M
x4b=32M x 4b x 4 banks)
512 Mb (Density)
3.1.2.2
Maximum Capacity
4 GB
DIMM Population Rules
DIMM population rules depend on the operating mode of the memory controller. On the server
board DIMMs must be populated in the following order: A1 and B1, A2 and B2, etc. The server
board will support population of DIMMs with different speed ratings, however this is not
recommended. The overall system memory speed will be determined by the slowest DIMM
populated.
3.1.2.2.1
Minimum Configuration
The following diagram shows a minimum two DIMM memory configuration for the server board.
Populated DIMM slots are shown in Gray.
DIMM B4
DIMM B3
DIMM B2
DIMM B1
DIMM A4
DIMM A3
DIMM A2
DIMM A1
MCH
Channel
A
Channel
B
Revision 1.0
23
Intel order number – D36978-004
Functional Architecture
Intel® Server Board S5000VSA TPS
Figure 8. Minimum Two DIMM Memory Configuration
Note: The server board BIOS supports single DIMM mode operation although this is generally
not recommended for “performance” applications. This configuration is only supported with a
512MB FBDIMM installed in DIMM slot A1.
3.1.2.2.2
Memory upgrades
The minimum memory upgrade increment is two DIMMs. The DIMMs must cover the same slot
number on both channels. DIMMs that cover a slot number must be identical with respect to
size, speed, and organization. DIMMs that cover adjacent slot positions need not be identical.
When adding two DIMMs to the configuration shown in Figure 10, the DIMMs should be
populated in DIMM slots A2 and B2 as shown in the following diagram. Populated DIMM slots
are shown in Gray.
DIMM B4
DIMM B3
DIMM B2
DIMM B1
DIMM A4
DIMM A3
DIMM A2
DIMM A1
MCH
Channel
A
Channel
B
Figure 9. Recommended Four DIMM Configuration
3.2 Enterprise South Bridge (ESB2-E)
The ESB2-E is a multi-function device that is a merging of four distinct functions: an ICH6 like
controller; a PCI-X* Bridge, a Gigabit Ethernet controller and a BMC. Each function within the
ESB2-E has its own set of configuration registers. Once configured, each appears to the system
as a distinct hardware controller.
A primary role of the ESB2-E is to provide the gateway to all PC-compatible I/O devices and
features. The baseboard uses the following ESB2-E features:
ƒ
ƒ
ƒ
PCI-X* bus interface
Six Channel SATA interface w/SATA Busy LED Control
Dual Gbe MAC
Revision 1.0
24
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Functional Architecture
Baseboard Management Controller (BMC)
Single ATA interface, with Ultra DMA 100 capability
Universal Serial Bus 2.0 (USB) interface
LPC bus interface
PC-compatible timer/counter and DMA controllers
APIC and 8259 interrupt controller
Power management
System RTC
General purpose I/O
This section describes the function of each I/O interface and how they operate on the server
board.
3.2.1
PCI Sub-system
3.2.1.1 PCI Express* Overview
The MCH supports three x4 PCI Express* ports. PCI Express is a high speed, frame
based, serial I/O interface that can achieve peak theoretical bandwidths of 2 GB/s per x4
port (1 GB/s in each direction). These ports can be configured in a number of different
combinations thus enhancing the scalability and performance of the system. Below is
the PCI Express port configuration used by the server board.
Server Board Configuration:
Port 0 (x4): Otherwise known as the Enterprise Server Interface (ESI) port, Port [0]
connects to the ESB2-E. Although the ESI port follows the standard PCI Express*
protocol, it also executes proprietary commands only used between Intel chipsets.
Port 2 and Port 3 (2 x4 = x8): Otherwise known as the Direct Memory Access (DMA)
port, x4 Ports [3:2] combine to create a x8 port which also connects to the ESB2-E. The
DMA port follows the standard PCI Express* protocol, but allows direct access to
memory for higher speed I/O transactions.
3.2.1.2 PCI Express* Hot-Plug
The server board does not support PCI Express* hot-plug.
3.2.2
SATA Support
The integrated Serial ATA (SATA) controller of the ESB2-E provides six SATA ports on the
server board. The SATA ports can be enabled/disabled and/or configured by accessing the
BIOS Setup Utility during POST.
The SATA function in the ESB2-E has dual modes of operation to support different operating
system conditions. In the case of native IDE-enabled operating systems, the ESB2-E has
separate PCI functions for serial and parallel ATA. To support legacy operating systems, there
is only one PCI function for both the serial and parallel ATA ports. The MAP register provides
the ability to share PCI functions. When sharing is enabled, all decode of I/O is done through
the SATA registers. A software write to the Function Disable Register (D31, F0, offset F2h, bit 1)
causes Device 31, Function 1 (IDE controller) to hidden, and its configuration registers are not
Revision 1.0
25
Intel order number – D36978-004
Functional Architecture
Intel® Server Board S5000VSA TPS
used. The SATA Capability Pointer Register (offset 34h) will change to indicate that MSI is not
supported in combined mode.
The ESB2-E SATA controller features two sets of interface signals that can be independently
enabled or disabled. Each interface is supported by an independent DMA controller. The ESB2E SATA controller interacts with an attached mass storage device through a register interface
that is equivalent to that presented by a traditional IDE host adapter. The host software follows
existing standards and conventions when accessing the register interface and follows standard
command protocol conventions.
SATA interface transfer rates are independent of UDMA mode settings. SATA interface transfer
rates will operate at the bus’ maximum speed, regardless of the UDMA mode reported by the
SATA device or the system BIOS.
3.2.2.1
SATA RAID
The Intel® Embedded RAID Technology II solution, available with the ESB2-E ICH6, offers data
striping for higher performance (RAID Level 0), alleviating disk bottlenecks by taking advantage
of the dual independent SATA controllers integrated in the ESB2-E ICH6. There is no loss of
PCI resources (request/grant pair) or add-in card slot.
Intel® Embedded RAID Technology II functionality requires the following items:
ƒ
ƒ
ƒ
ƒ
ESB2-E ICH6
Intel® Embedded RAID Technology II Option ROM must be on the server board
Intel® Application Accelerator RAID Edition drivers, most recent revision
Two SATA hard disk drives
Intel® Embedded RAID Technology II is not available in the following configurations:
ƒ
ƒ
3.2.2.2
The SATA controller in compatible mode
Intel® Embedded RAID Technology II has been disabled
Intel® Embedded RAID Technology II Option ROM
The Intel® Embedded RAID Technology II for SATA Option ROM provides a pre-OS user
interface for the Intel® Embedded RAID Technology II implementation and provides the ability
for an Intel® Embedded RAID Technology II volume to be used as a boot disk as well as to
detect any faults in the Intel® Embedded RAID Technology II volume(s) attached to the Intel®
RAID controller.
3.2.3
Parallel ATA (PATA) Support
The integrated IDE controller of the ESB2-E ICH6 provides one IDE channel. This IDE channel
is capable of supporting one optical drive. A standard high density 40-pin IDE connector
interfaces with the primary IDE channel signals. The IDE channels can be configured and
enabled or disabled by accessing the BIOS Setup Utility during POST.
Revision 1.0
26
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Functional Architecture
The BIOS supports the ATA/ATAPI Specification, version 6 or later. It initializes the embedded
IDE controller in the chipset south-bridge and the IDE devices that are connected to these
devices. The BIOS scans the IDE devices and programs the controller and the devices with
their optimum timings. The IDE disk read/write services that are provided by the BIOS use PIO
mode, but the BIOS will program the necessary Ultra DMA registers in the IDE controller so that
the operating system can use the Ultra DMA modes.
The BIOS initializes and supports ATAPI devices such as LS-120/240, CDROM, CD-RW and
DVD.
The BIOS initializes and supports SATA devices just like PATA devices. It initializes the
embedded the IDE controllers in the chipset and any SATA devices that are connected to these
controllers. From a software standpoint, SATA controllers present the same register interface as
the PATA controllers. Hot plugging SATA drives during the boot process is not supported by the
BIOS and may result in undefined behavior
3.2.3.1
Ultra ATA/133
The IDE interface of the ESB2-E ICH DMA protocol redefines signals on the IDE cable to allow
both host and target throttling of data and transfer rates of up to 133MB/s.
3.2.3.2
IDE Initialization
The BIOS supports the ATA/ATAPI Specification, version 6 or later. The BIOS initializes the
embedded IDE controller in the chipset (ESB2-E ICH) and the IDE device that is connected to
these devices. The BIOS scans the IDE device and programs the controller and the device with
their optimum timings. The IDE disk read/write services that are provided by the BIOS use PIO
mode, but the BIOS programs the necessary Ultra DMA registers in the IDE controller so that
the operating system can use the Ultra DMA Modes.
3.2.4
USB 2.0 Support
The USB controller functionality integrated into ESB2-E ICH6 provides the server board with the
interface for up to seven USB 2.0 ports. Four external connectors are located on the back edge
of the server board. One internal 1x10 header is provided, capable of supporting an additional
two optional USB 2.0 ports. There is also a USB port intended for USB floppy support.
3.3 Video Support
The server board provides an ATI* ES1000 PCI graphics accelerator, along with 16MB of video
DDR SDRAM and support circuitry for an embedded SVGA video sub-system. The ATI*
ES1000 chip contains an SVGA video controller, clock generator, 2D and 3D engine, and
RAMDAC in a 272-pin PBGA. One 4Mx16x4bank DDR SDRAM chip provides 16MB of video
memory.
The SVGA sub-system supports a variety of modes, up to 1600 x 1200 resolution in 8 / 16 /
32bpp modes under 2D, and up to 1024 x 768 resolution in 8 / 16 / 24 / 32bpp modes under 3D.
It also supports both CRT and LCD monitors up to 100 Hz vertical refresh rate.
Video is accessed using a standard 15-pin VGA connector found on the back edge of the server
board.
Revision 1.0
27
Intel order number – D36978-004
Functional Architecture
Intel® Server Board S5000VSA TPS
On-board video can be disabled using the BIOS Setup Utility or when an add-in video card is
installed. The system BIOS also provides the option for dual video operation when an add-in
video card is configured in the system.
3.3.1.1
Video Modes
The chip supports all standard IBM* VGA modes. The following table shows the 2D/3D modes
supported for both CRT and LCD.
Table 5. Video Modes
2D Mode
Refresh Rate (Hz)
2D Video Mode Support
16 bpp
24 bpp
Supported
Supported
32 bpp
Supported
640x480
60, 72, 75, 90, 100
8 bpp
Supported
800x600
60, 70, 75, 90, 100
Supported
Supported
Supported
Supported
1024x768
60, 72, 75, 90, 100
Supported
Supported
Supported
Supported
1280x1024
43, 60
Supported
Supported
Supported
Supported
1280x1024
70, 72
Supported
–
Supported
Supported
1600x1200
60, 66
Supported
Supported
Supported
Supported
1600x1200
76, 85
Supported
Supported
Supported
–
3.3.1.2
Video Memory Interface
The memory controller sub-system of the ES1000 arbitrates requests from direct memory
interface, the VGA graphics controller, the drawing coprocessor, the display controller, the video
scalar, and hardware cursor. Requests are serviced in a manner that ensures display integrity
and maximum CPU/coprocessor drawing performance.
The server board supports a 16MB (4Meg x 16-bit x 4 banks) DDR SDRAM device for video
memory. The following table shows the video memory interface signals:
Table 6. Video Memory Interface
Signal Name
V_M_CAS_N
I/O Type
O
Description
Column Address Select
V_M_CKE
O
Clock Enable for Memory
V_M_CS_N
O
Chip Select for Memory
V_M_DQM[1..0] O
Memory Data Byte Mask
V_M_QS[1..0]
Memory Data Strobe
I/O
V_M_CLK
I
Memory Clock
V_M_CLK_N
I
Memory Clock Compliment
V_M_MA[15..0]
O
Memory Address Bus
V_M_MD[15..0]
I/O
Memory Data Bus
V_M_RAS_N
O
Row Address Select
V_M_WE_N
O
Write Enable
Revision 1.0
28
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
3.3.1.3
Functional Architecture
Dual Video
The BIOS supports single and dual video modes. The dual video mode is enabled by default.
ƒ
ƒ
In single mode (Dual Monitor Video=Disabled), the onboard video controller is disabled
when an add-in video card is detected.
In dual mode (Onboard Video=Enabled, Dual Monitor Video=Enabled), the onboard
video controller is enabled and will be the primary video device. The external video card
will be allocated resources and is considered the secondary video device. BIOS Setup
provides user options to configure the feature as follows:
Video is routed to the rear video connector by default. When a monitor is plugged in to the front
panel video connector, the video is routed to it and the rear connector is disabled. This can be
done by hot plugging the video connector.
Onboard Video
Enabled
Disabled
Dual Monitor Video
Enabled
Disabled
Shaded if onboard video is set to "Disabled"
3.4 Network Interface Controller (NIC)
The Intel® 82563EB Gigabit Platform LAN Connect is a dual, compact Physical Layer
Transceiver (PHY) component designed for 10/100/1000 Mbps operation.
The Intel® 82563EB device is based upon proven PHY technology integrated into Intel Gigabit
Ethernet Controllers. The physical layer circuitry provides a standard IEEE 802.3 Ethernet
interface for 1000BASE-T, 100BASE-TX, and 10BASE-T applications (802.3, 802.3u, and
802.3ab). The 82563EB device is capable of transmitting and receiving data at rates of 1000
Mbps, 100 Mbps, or 10 Mbps
Each Network Interface Controller (NIC) drives two LEDs located on each network interface
connector. The link/activity LED (to the left of the connector) indicates network connection when
on, and Transmit/Receive activity when blinking. The speed LED (to the right of the connector)
indicates 1000-Mbps operation when amber, 100-Mbps operation when green, and 10-Mbps
when off. The table below provides an overview of the LEDs.
Table 7. NIC Status LED
LED Color
Green/Amber (Left)
Green (Right)
LED State
NIC State
Off
10 Mbps
Green
100 Mbps
Amber
1000 Mbps
On
Active Connection
Blinking
Transmit / Receive activity
Revision 1.0
29
Intel order number – D36978-004
Functional Architecture
Intel® Server Board S5000VSA TPS
3.5 Super I/O
Legacy I/O support is provided by using a National Semiconductor* PC87427 Super I/O device.
This chip contains all of the necessary circuitry to control two serial ports, one parallel port,
floppy disk, and PS/2-compatible keyboard and mouse. Of these, the server board supports the
following:
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
3.5.1.1
GPIOs
Two serial ports
Removable media drives
Floppy controller
Keyboard and mouse support
Wake up control
System health support
Serial Ports
The server board provides two serial ports: an external DBb-9 serial port, and an internal DH10
serial header.
Serial B is an optional port, accessed through a 9-pin internal DH-10 header. A standard DH10
to DB9 cable can be used to direct serial B to the rear of a chassis. The serial B interface
follows the standard RS232 pin-out as defined in the following table.
Revision 1.0
30
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Functional Architecture
Table 8. Serial A Header Pin-out
Pin
1
Signal Name
DCD
2
DSR
3
RX
4
RTS
5
TX
6
CTS
7
DTR
8
RI
9
GND
Serial A Header Pin-out
The rear DB-9 serial A port is a fully functional serial port that can support any standard serial
device.
3.5.1.2
Removable Media Drives
The BIOS supports removable media devices, including 1.44MB floppy removable media
devices and optical devices such as a CD-ROM drive or a read-only DVD-ROM drive. The BIOS
supports booting from USB mass storage devices connected to the chassis USB port, such as a
USB key device.
The BIOS supports USB 2.0 media storage devices that are backward compatible to the USB
1.1 specification.
3.5.1.3
Floppy Disk Controller
The server board does not support a floppy disk controller (FDC) interface. However, the
system BIOS does recognize USB floppy devices.
3.5.1.4
Keyboard and Mouse Support
Dual stacked PS/2 ports, located on the back edge of the server board, are provided for
keyboard and mouse support. Either port can support a mouse or keyboard. Neither port
supports hot plugging.
3.5.1.5
Wake-up Control
The super I/O contains functionality that allows various events to control the power-on and
power-off the system.
Revision 1.0
31
Intel order number – D36978-004
Platform Management
4.
Intel® Server Board S5000VSA TPS
Platform Management
The platform management sub-system on the server board is based on the integrated
Baseboard Management Controller (BMC) features of the ESB2-E. In addition, the on board
platform management subsystem consists of communication buses, sensors, system BIOS, and
system management firmware.
For additional information, see the Intel® S5000 Server Board Family Datasheet.
Platform management involves:
1. ACPI implementation specific details
2. System monitoring, control and response to thermal, voltage and intrusion events
3. BIOS security
4.1 Power Button
The system power button is connected to the ESB2-E component. When the button is
pressed the ESB2-E receives the signal and transitions the system to the proper sleepstate as determined by the OS and software. If the power button is pressed and held for
4 seconds the system will power off (S5 state). This feature is called “power button override” and particularly helpful in the case of system hang and locking up the system. The
server board is fully ACPI 1.0a compliant.
4.2 Sleep States Supported
The ESB2-E controls the system sleep states. States S0, S1, S4 and S5 are supported.
Either the BIOS or an OS invokes the sleep states. This is done in response to a power
button being pressed or an inactivity timer countdown. Normally the OS determines which
sleep state to transition into. However a 4 second power button over-ride event places
the system immediately into S5. When transitioning into a software-invoked sleep state,
the ESB2-E will attempt to gracefully put the system to sleep by first going into the CPU
C2 state.
4.2.1 S0 State
This is the normal operating state, even though there are some power savings modes in
this state using CPU Halt and Stop Clock (CPU C1and C2 states). S0 affords the fastest
wake up response time of any sleep state because the system remains fully powered
and memory is intact.
4.2.2 S1 State
This state is entered via a CPU sleep signal from the ESB2-E (CPU C3 state). The
system remains fully powered and memory contents intact but the CPUs enter their
lowest power state. The OS uses ACPI drivers to disable bus masters for uni-processor
configurations, while the OS flushes and invalidates caches before entering this state in
multiprocessor configurations. Wake-up latency is slightly longer in this state than S0,
however power savings are quite improved from S0.
Revision 1.0
32
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Platform Management
4.2.3 S4 State
This state is called Suspend to Disk. From a hardware perspective it is equivalent to an
S5 (Soft Off) state, however, S4 has the distinction of avoiding a full boot sequence.
The OS is responsible for saving the system context in a special partition on the hard
drive. Although the system must power up and fully boot, boot time to an application is
reduced because the computer is returned to the same system state as when the
preceding power-off occurred.
4.2.4 S5 State
This state is the normal off state whether entered through the power button or soft off. All
power is shut off except for the logic required to restart. In this state, several ”wake up
events” are supported. The system only remains in the S5 state while the power supply is
plugged into the wall. If the power supply is unplugged from the wall, this is considered a
mechanical OFF or G3.
4.3 Wakeup Events
The types of wake events and wake up latencies are related to the actual power rails
available to the system in a particular sleep state as well as to the location in which the
system context is stored. Regardless of the sleep state, wake on the power button is
always supported except in a ‘mechanical off’ situation. When in a sleep state, the server
board complies with the PCI 2.2 Specification by supplying the optional 3.3V standby
voltage to each PCI slot as well as the PME signal. This enables any compliant PCI card
to wake the system up from any sleep state except mechanical off.
4.3.1
Wakeup from S1 Sleep State
During S1, the system is fully powered permitting support for wake on USB, wake on
PS/2 Keyboard/Mouse, wake on RTC alarm, and wake on PCI PME. Wake on USB,
wake on PS/2 Keyboard/Mouse and wake on RTC alarm are not supported by the server
board POE BIOS.
4.3.2 Wakeup from S3 Sleep State (BFAD Workstation Only)
In S3 state, wake from USB, PS/2, power button, and LAN are supported.
4.3.3 Wakeup from S4 and S5 States
In S4 or S5, wake from power button and LAN are supported.
4.4 AC Power Failure Recovery
The design supports two modes of operation with regard to AC power recovery. The user can
select (via a BIOS Setup Screen) whether the system should power back up or remain off after
AC is restored. The ESB2-E does not rely on BIOS to boot and check system status in the case
of AC failure. The ESB2-E contains a register variable named “afterG3” which BIOS can set
based on user configuration input. The ESB2-E internally examines after it detects an AC
recovery.
4.5
PCI PM Support
The PCI Power Management Specification calls out three areas to be compliant: the
system reset signal must be held low when in a sleep state, the system must support the
Revision 1.0
33
Intel order number – D36978-004
Platform Management
Intel® Server Board S5000VSA TPS
PCI PME signal and the system should provide 3.3v standby to the PCI slots. The
server board design complies with the PCI PM Specification and the PCI 2.2
Specification for optional 3.3V standby voltage to be supplied to each PCI, PCI-X*, and
PCI Express* slots. This support allows any compliant PCI, PCI-X, or PCI Express
adapter card to wake the system up from any sleep state except mechanical off.
Because of the limited amount of power available on 3.3V standby, the user and the OS
must configure the system carefully following the PCI Power Management Specification.
4.5.1 RESET# Control
The ESB2-E always drives the Platform Reset signal (LOW or HIGH), even when the
system is in a sleep state. This is required for PCI power management. Any device that
may be active will be able to sample this signal to know that the system is in a reset
condition.
4.5.2 PCI Vaux
All standard PCI, PCI-X*, and PCI Express* slots are provided with 3.3 V aux power to
support wake events from all sleep states. The MIC2169 power supply will deliver 4 A of
5 VSB, which in turn is regulated to 3.3 VSB when the system is in the S4 or S5 sleep
state. Standby 3.3V power will not be connected to x1 PCI Express debug slots and
these debug slots will not wake events.
4.6 System Management
The LM94 monitors the majority of the system voltages. The LM94 also monitors the VID
signals from the Dual-Core Intel® Xeon® processor 5000 sequence. All voltage levels
can be read from the LM94 via the SMBus.
4.6.1
CPU Thermal Management
Each CPU will monitor its own core temperature and thermally manage itself when it
reaches a certain temperature. The system will also utilize the internal CPU diode(s) to
monitor the die temperature. The diode pins are routed to the diode input pins in the
LM94. For valid thermal diode configurations for dual core processors, refer to thermal
diode options table. The LM94 can be programmed to force the CPU fans to full speed
operation when it senses the CPU core temperature exceeding a specific value. In
addition, the LM94 itself has an on chip thermal monitor. The placement of the LM94 will
allow it to monitor the incoming ambient temperature that is blown in by the chassis input
fan in front of the processors.
Revision 1.0
34
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Platform Management
4.7 System Fan Operation
The server board utilizes both the LM94 and super I/O to monitor and control the fans in
the system. Both devices use pulse width modulated (PWM) outputs that can modulate
the voltage across the fans, providing a variable duty-cycle to affect a reduced DC
voltage from nominal 12 VDC. The fan drive circuit and headers are the new 4-pin type.
The 4-pin fans now have a dedicated PWM input for speed control, in addition to the
standard ground, +12V, and tachometer pins. Both the LM94 and super I/O have fan
tachometer inputs that can be used to monitor and control fan speeds. All fan
tachometer data can be extracted from the controllers via the SMBus. The fan speed
control circuit does not control the power supply fan. To support limited controller and/or
firmware functionality during power on and debug activities, each PWM output has a
bypass jumper that will cause all fans to run at full speed and ignore the PWM control.
Each CPU fan has its own dedicated PWM input and tachometer output, so they can be
controlled and monitored independently. The LM94 will be dedicated to processor fan
speed control and monitor, and the SIO will drive and monitor the remaining fans in the
system: the chassis and memory fans.
Refer to fan manual override jumpers table for identification of fan speed override
jumpers. Refer to the National Semiconductor* PC87427 and LM94 (National
Semiconductor LM93) specifications regarding fan monitor and control capabilities and
programming requirements.
4.8 Light Guided Diagnostics - System Status and FRU
LEDs
The standard system status LEDs for PWR/SLP, HDD and other LEDs as specified in SSI
EEB are supported on the front panel header.
For 10/100/1000 LAN, status LEDs are supported through the back panel 10/100/1000
RJ45 Jack and the front panel per the SSI-EEB specification. The dual color LED
indicates the LAN speed at 10Mbit/s (off), 100Mbit/s (green) or 1000 Mbit/s (yellow). The
green link LED represents both link integrity (on/off) as well as LAN activity (blinking).
Revision 1.0
35
Intel order number – D36978-004
Platform Management
Intel® Server Board S5000VSA TPS
Table 9 Summary of LEDs on the Intel® Server Board S5000VSA
Name
Power/Sleep
(S1/S3)
Status
Front-Panel &
Baseboard
FANS
CPU
DIMM
Progress Code
HP PCI
Telco FP
GEM424
(SATA/SAS)
GEM359 (SCSI)
Vitesse
(SATA/SAS)
NOTE: Amber ON,
and GREEN OFF
indicates its OK to
remove HDD
Power Supply
HDD ACTIVITY
LAN#1-Link/Act
LAN#1-Speed
LAN#2-Link/Act
LAN#2-Speed
Identification
Color Condition What it describes
Green
ON
Power On
Green
BLINK Sleep (S1/S3)
OFF
Power Off (also S4)
Green
ON
System READY
Green
BLINK System Degraded (memory, CPU failure)
Amber
ON
BW/BIOS: Fatal Alarm. Post error/NMI event
FW Only: CPU/Terminator Missing, Fan,
Temparature, Voltage, visible if fatal error causes a
power down
Amber
BLINK FAN Alarm. Temparature or Voltage Non-Critical
Alarm, Drive Fault
OFF
OFF
BIOS/FW: In redundant fan system, if one or more
Amber
ON
fans are missing during POST, BIOS should turn on
LED
FW: FAN Failure Alarm
OFF
Amber
ON
Fatal Alarm.CPU/Terminator Missing/CPU Failure
OFF
Memory failure - fatal
Amber
ON
See Flash tab for details of the code
?
?
?
?
?
?
Green
Hard Disk Drive Access
NOTE: Only some SATA drive support this feature
BLINK
ON
Disk drive fault
Amber
Green
HDD in Standby/Stopped. HDD may be removed.
OFF
LED normally OFF
Green
Spin-up/Spin-down
BLINK 1s LED on 0.5s, OFF 0.5s, 50% duty cycle of 1s
ON
Green
Active/Idle power
Green
Formatting
LED ON for 1s, OFF for 1s, 50% duty-cycle of 2s
BLINK 2s
ON
Fault
Amber
Flashing - On 1s, OFF 1s, 50% duty-cycle of 2s
Amber
BLINK Indicates Rebuild
Green
Green
Green
Green
Amber
Green
Green
Green
Amber
Blue
Blue
-
BLINK
OFF
ON
BLINK
OFF
ON
ON
OFF
ON
BLINK
OFF
ON
ON
OFF
ON
BLINK
OFF
Hard Disk Drive Access
No Access
Link
LAN Access (off when there is traffic)
Disconnect
Green, link speed is 100Mbits/sec
Amber, link speed is 1000Mbits/sec
OFF, link speed is 10Mbits/sec
Link
LAN Access (off when there is traffic)
Disconnect
Green, link speed is 100Mbits/sec
Amber, link speed is 1000Mbits/sec
OFF, link speed is 10Mbits/sec
Unit selected for identification
blink under software control
No Identification
Revision 1.0
36
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
5.
Connector / Header Locations and Pin-outs
Connector / Header Locations and Pin-outs
5.1 Board Connector Information
The following section provides detailed information regarding all connectors, headers and
jumpers on the server board. Table 10 lists all connector types available on the board and
corresponding reference designators printed on silkscreen.
Table 10. Board Connector Matrix
Connector
Quantity
Reference Designators
Connector Type
Power supply
3
J4K1
J9C1
J9D1
CPU Power
Main Power
P/S Aux
CPU
2
J1000, J2000
CPU Sockets
Main Memory
8
U7B1, U7B2, U7B3, U8B1, U8B2, U8B3, U9B1, U9B2 DIMM Sockets
Pin
Count
8
24
5
771
240
RAID Key
1
J1D1
Key Holder
3
IDE
1
J2K3
Shrouded
Header
44
System Fans
4
J1K4, J1K5, J2K2, J2K5
Header
4
Memory Fans
2
J9B1, J9B2
Header
4
CPU Fans
2
J5K1, J9K1
Header
4
Battery
1
BT4E1
Battery Holder
3
Keyboard/Mouse
1
J9A1
PS2, stacked
12
Rear 2xUSB/LAN
connector
2
JA6A1, JA6A2
External
16
Serial Port B
1
J1B1
Header
9
Serial Port A
Video Connector
1
1
J7A1
External, RJ45
External, D-Sub
10
15
Front panel, main
1
J1F1
Header
24
Front panel, USB
1
J1J8
Header
10
Intrusion detect
1
J1A1
Header
2
Serial ATA
2
J1K3, J1J7
Header
7
SATA/SAS
4
J1J4, J1H3, J1H1, J1G6
Header
7
IPMB/LCP
1
J1J5
Header
4
IPMB
1
J1J6
Header
3
Configuration
Jumpers
3
J1J1, J1J2, J1J3
Jumper
3
Revision 1.0
37
Intel order number – D36978-004
Connector / Header Locations and Pin-outs
Intel® Server Board S5000VSA TPS
5.2 Power Connectors
The main power supply connection is obtained using an SSI compliant 2x12 pin connector
(J9C1). In addition, there are two additional power related connectors; one SSI compliant 2x4
pin power connector (J4K1) providing support for additional 12V, and one SSI compliant 1x5 pin
connector (J9D1) providing I2C monitoring of the power supply. The following tables define their
pin-outs.
Table 11. Power Connector Pin-out (J9C1)
Pin
1
Signal
+3.3Vdc
Color
Orange
Pin
13
Signal
+3.3Vdc
Color
Orange
2
+3.3Vdc
Orange
14
-12Vdc
Blue
3
GND
Black
15
GND
Black
4
+5Vdc
Red
16
PS_ON
Green
5
GND
Black
17
GND
Black
6
+5Vdc
Red
18
GND
Black
7
GND
Black
19
GND
Black
8
PWR_GND
Gray
20
NC
White
9
5VSB
Purple
21
+5Vdc
Red
10
+12Vdc
Yellow
22
+5Vdc
Red
11
+12Vdc
Yellow
23
+5Vdc
Red
12
+3.3Vdc
Orange
24
GND
Black
Table 12. 12V Power Connector Pin-out (J4K1)
Pin
1
Signal
GND
Color
Black
2
GND
Black
3
GND
Black
4
GND
Black
5
+12Vdc
Yellow/Black
6
+12Vdc
Yellow/Black
7
+12Vdc
Yellow/Black
8
+12Vdc
Yellow/Black
Revision 1.0
38
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Connector / Header Locations and Pin-outs
Table 13. Power Supply Signal Connector Pin-out (J1K1)
Pin
Signal
1
SMB_CLK_ESB_FP_PWR_R
Color
Orange
2
SMB_DAT_ESB_FP_PWR_R
Black
3
SMB_ALRT_3_ESB_R
Red
4
3.3V SENSE-
Yellow
5
3.3V SENSE+
Green
5.3 Control Panel Connector
The server board provides an optional 24-pin SSI control panel connector (J1F1) for use with
reference chassis. The following tables provide the pin-out for this connector.
Table 14. Front Panel SSI Standard 24-pin Connector Pin-out (J1F1)
Pin
1
P5V
Signal Name
3
Key
5
FP_PWR_LED_L
7
P5V
9
HDD_LED_ACT_R
11
FP_PWR_BTN_L
13
GND
15
Reset Button
17
GND
19
FP_SLP_BTN_L
21
GND
23
FP_NMI_BTN_L
25
Key
27
P5V_STBY
29
FP_ID_LED_L
31
FP_ID_BTN_L
33
GND
Front Panel Pinout
Front Panel Pin-out
Pin
2
O O
4
P5V_STBY
6
FP_COOL_FLT_LED_R
8
P5V_STBY
10
FP_STATUS_LED2_R
LAN A
Link / Act
12
LAN_ACT_A_L
14
LAN_LINKA_L
SMBus
16
PS_I2C_5VSB_SDA
18
PS_I2C_5VSB_SCL
Power
LED
O
Cool Fault
O O
HDD
LED
O O
O O
System
Fault
Power
Button
O O
Reset
Button
O O
Sleep
Button
O O
Intruder
O O
LAN B
Link / Act
NMI
ID LED
ID Button
O O
O O
O O
O O
Signal Name
P5V_STBY
20
FP_CHASSIS_INTRU
22
LAN_ACT_B_L
24
LAN_LINKB_L
26
Key
O O
28
P5V_STBY
O O
30
FP_STATUS_LED1_R
O O
32
P5V
34
FP_HDD_FLT_LED_R
Revision 1.0
39
Intel order number – D36978-004
Connector / Header Locations and Pin-outs
Intel® Server Board S5000VSA TPS
5.4 I/O Connectors
5.4.1
VGA Connector
The following table details the pin-out definition of the VGA connector (J7A1).
Table 15. VGA Connector Pin-Out (J7A1)
1
Pin
Signal Name
V_IO_R_CONN
Description
Red (analog color signal R)
2
V_IO_G_CONN
Green (analog color signal G)
3
V_IO_B_CONN
Blue (analog color signal B)
4
TP_VID_CONN_B4
No connection
5
GND
Ground
6
GND
Ground
7
GND
Ground
8
GND
Ground
9
TP_VID_CONN_B9
No Connection
10
GND
Ground
11
TP_VID_CONN_B11
No connection
12
V_IO_DDCDAT
DDCDAT
13
V_IO_HSYNC_CONN
HSYNC (horizontal sync)
14
V_IO_VSYNC_CONN
VSYNC (vertical sync)
15
V_IO_DDCCLK
DDCCLK
Revision 1.0
40
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
5.4.2
Connector / Header Locations and Pin-outs
NIC Connectors
The server board provides two RJ45 NIC connectors oriented side by side on the back edge of
the board (JA6A1, JA6A2). The pin-out for each connector is identical and is defined in the
following table.
Table 16. RJ-45 10/100/1000 NIC Connector Pin-Out (JA6A1, JA6A2)
Pin
Signal Name
1
GND
2
P1V8_NIC
3
NIC_A_MDI3P
4
NIC_A_MDI3N
5
NIC_A_MDI2P
6
NIC_A_MDI2N
7
NIC_A_MDI1P
8
NIC_A_MDI1N
9
NIC_A_MDI0P
10
NIC_A_MDI0N
11 (D1)
NIC_LINKA_1000_N (LED
12 (D2)
NIC_LINKA_100_N (LED)
13 (D3)
NIC_ACT_LED_N
14
NIC_LINK_LED_N
15
GND
16
GND
Revision 1.0
41
Intel order number – D36978-004
Connector / Header Locations and Pin-outs
5.4.3
Intel® Server Board S5000VSA TPS
ATA-100 Connector
The server board provides one legacy ATA-100 44-pin connector (J2K3). The pin-out is defined
in the following table.
Table 17. ATA-100 44-pin Connector Pin-out (J2K3)
Pin
1
Signal Name
ESB_PLT_RST_IDE_N
Pin
2
Signal Name
GND
3
RIDE_DD_7
4
RIDE_DD_8
5
RIDE_DD_6
6
RIDE_DD_9
7
RIDE_DD_5
8
RIDE_DD_10
9
RIDE_DD_4
10
RIDE_DD_11
11
RIDE_DD_3
12
RIDE_DD_12
13
RIDE_DD_2
14
RIDE_DD_13
15
RIDE_DD_1
16
RIDE_DD_14
17
RIDE_DD_0
18
RIDE_DD_15
19
GND
20
KEY
21
RIDE_DDREQ
22
GND
23
RIDE_DIOW_N
24
GND
25
RIDE_DIOR_N
26
GND
27
RIDE_PIORDY
28
GND
29
RIDE_DDACK_N
30
GND
31
IRQ_IDE
32
TP_PIDE_32
33
RIDE_DA1
34
IDE_PRI_CBLSNS
35
RIDE_DA0
36
RIDE_DA2
37
RIDE_DCS1_N
38
RIDE_DCS3_N
39
LED_IDE_N
40
GND
41
P5V
42
P5V
43
GND
44
GND
Revision 1.0
42
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
5.4.4
Connector / Header Locations and Pin-outs
SATA Connectors
The server board provides six SATA (Serial ATA) connectors: SATA-0 (J1K3), SATA-1 (J1J7),
SATA-2 (J1J4), SATA-3 (J1H3), SATA-4 (J1H1), SATA-5 (J1G6). The pin configuration for each
connector is identical and is defined in the following table.
Table 18. SATA Connector Pin-Out (J1K3, J1J7, J1J4, J1H3, J1H1, J1G6)
Pin
1
5.4.5
Signal Name
GND
Description
GND1
2
SATA#_TX_P_C
Positive side of transmit differential pair
3
SATA#_TX_N_C
Negative side of transmit differential pair
4
GND
GND2
5
SATA#_RX_N_C
Negative side of Receive differential pair
6
SATA#_RX_P_C
Positive side of Receive differential pair
7
GND
GND3
Serial Port Connectors
The server board provides one external DB-9 serial A port (J7A1) and one internal 9-pin serial B
header (J1B1). The following tables define the pin-outs for each.
Table 19. External RJ-45 Serial B Port Pin-Out (J9A2)
Pin
1
2
Signal Name
SPA_DCD
Description
Data Carrier Detect
SPA_RD
Receive Data
3
SPA_TD
Transmit data
4
SPA_DTR
Data Terminal Ready
5
GND
Ground
6
SPA_DSR
Data Set Ready
7
SPA_RTS
Request to Send
8
SPA_CTS
Clear to Send
9
SPA_RI
Ring Indicator
Revision 1.0
43
Intel order number – D36978-004
Connector / Header Locations and Pin-outs
Intel® Server Board S5000VSA TPS
Table 20. Internal 9-pin Serial A Header Pin-Out (J1B1)
Pin
1
5.4.6
Signal Name
SPB_DCD
Description
DCD (carrier detect)
2
SPB_DSR
DSR (data set ready)
3
SPB_SIN_L
RXD (receive data)
4
SPB_RTS
RTS (request to send)
5
SPB_SOUT_N
TXD (Transmit data)
6
SPB_CTS
CTS (clear to send)
7
SPB_DTR
DTR (Data terminal ready)
8
SPB_RI
RI (Ring Indicate)
9
GND
Ground
Keyboard and Mouse Connector
Two stacked PS/2 ports (J9A1) are provided to support both a keyboard and a mouse. Either
PS/2 port can support a mouse or keyboard. The following table details the pin-out of the PS/2
connector.
Table 21. Stacked PS/2 Keyboard and Mouse Port Pin-Out (J9A1)
Pin
1
Signal Name
KB_DATA_F
Description
Keyboard Data
2
TP_PS2_2
Test point – keyboard
3
GND
Ground
4
P5V_KB_F
Keyboard / mouse power
5
KB_CLK_F
Keyboard Clock
6
TP_PS2_6
Test point – keyboard / mouse
7
MS_DAT_F
Mouse Data
8
TP_PS2_8
Test point – keyboard / mouse
9
GND
Ground
10
P5V_KB_F
Keyboard / mouse power
11
MS_CLK_F
Mouse Clock
12
TP_PS2_12
Test point – keyboard / mouse
13
GND
Ground
14
GND
Ground
15
GND
Ground
16
GND
Ground
17
GND
Ground
Revision 1.0
44
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
5.4.7
Connector / Header Locations and Pin-outs
USB Connector
The following table details the pin-out of the external USB connectors (JA6A1, JA6A2) found on
the back edge of the server board.
Table 22. External USB Connector Pin-Out (JA6A1, JA6A2)
Pin
Signal Name
1 USB_OC#_FB_1
Description
USB_PWR
2
USB_P#N_FB_2
DATAL0 (Differential data line paired with DATAH0)
3
USB_P#N_FB_2
DATAH0 (Differential data line paired with DATAL0)
4
GND
Ground
One 2x5 connector on the server board (J1J8) provides an option to support an additional two
USB ports. The pin-out of the connector is detailed in the following table.
Table 23. Internal USB Connector Pin-Out (J1J8)
Pin
1
Signal Name
P5V_USB2_VBUS0
Description
USB Power (Ports 0,1)
2
P5V_USB2_VBUS1
USB Power (Ports 0,1)
3
USB_ESB_P0N_CONN USB Port 0 Negative Signal
4
USB_ESB_P1N_CONN USB Port 0 Positive Signal
5
USB_ESB_P0P_CONN
USB Port 1 Negative Signal
6
USB_ESB_P1P_CONN
USB Port 1 Positive Signal
7
Ground
8
Ground
9
10
-TP_USB_ESB_NC
No Pin
TEST POINT
Revision 1.0
45
Intel order number – D36978-004
Connector / Header Locations and Pin-outs
Intel® Server Board S5000VSA TPS
5.5 Fan Headers
The server board provides eight SSI compliant 4-pin fan connectors. Two fans are designated
as processor cooling fans, CPU1 Fan (J9K1) and CPU2 Fan (J5K1); six fans are designated as
System Fan 1 (J1K4), System Fan 2 (J1K5), System Fan 3 (J2K2), System Fan 4 (J2K5),
System Fan 5 (J9B1), and System Fan 6 (J9B2).
Table 24. SSI Fan Connector Pin-out (J9K1,J5K1,J1K4, J1K5, J2K2, J2K5, J9B1, J9B2)
Pin
1
Signal Name
Ground
Type
GND
Description
GROUND is the power supply ground
2
12V
Power
Power supply 12V
1
Fan Tach
Out
FAN_TACH signal is connected to the BMC to monitor the fan speed
3
Fan PWM
In
FAN_PWM signal to control fan speed
Revision 1.0
46
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
6.
Jumper Block Settings
Jumper Block Settings
The server board has several 2-pin and 3-pin jumper blocks that can be used to configure,
protect, or recover specific features of the server board. Pin 1 on each jumper block is denoted
by a “*” or “▼”.
6.1 Recovery Jumper Blocks
Table 25. Recovery Jumpers (J1J1, J1J2)
Jumper Name
J1J2: Password
Clear
J1J1: CMOS
Clear
CMOS
CLR
2
3
J1J1
Pins
1-2
What happens at system reset…
These pins should have a jumper in place for normal system operation. (Default)
2-3
If these pins are jumpered, administrator and user passwords will be cleared on the next
reset. These pins should not be jumpered for normal operation.
1-2
These pins should have a jumper in place for normal system operation. (Default)
2-3
If these pins are jumpered, the CMOS settings will be cleared on the next reset. These
pins should not be jumpered for normal operation
PASSWORD
CLR
Default
Default
2
CLEAR
CMOS 3
CLEAR
PASSWORD
J1J2
AF000187
Figure 10. Recovery Jumper Blocks (J1J1, J1J2)
Revision 1.0
47
Intel order number – D36978-004
Jumper Block Settings
Intel® Server Board S5000VSA TPS
6.2 BIOS Select Jumper
The jumper block at J1J3, located next the recovery jumper blocks, is used to select which
BIOS image the system will boot to. Pin 1 on the jumper is identified with a ‘▼’.
BIOS
Select
Force Lower
Bank
2
Default
3
J1J3
AF000185
Figure 11. BIOS Select Jumper (J3H1)
Pins
1-2
Force BIOS to bank 2
What happens at system reset…
2-3
System is configured for normal operation (bank 1) (Default)
6.3 Other Configuration Jumpers
Function
BMC Force Update
Pins
1-2
Operation
Normal Operation
2-3
Force Update Mode
1-2
FRB3 Timer Enabled
2-3
FRB3 Timer Disabled
FSB Speed Select
1-2
533 MHz
2-3
Default Position. 1066 MHz
XDP CPU1 Isolation Jumper
1-2
Isolate CPU2 from scan chain
2-3
Include CPU2 in scan chain
Installed
Nocona-T/Dempsey-T
Removed
Dempsey-J
FRB3 Timer Disable
Processor Select
Revision 1.0
48
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
7.
Light Guided Diagnostics
Light Guided Diagnostics
The server board has several on-board diagnostic LEDs to assist in troubleshooting board level
issues. This section provides a description of where each LED is located on the board and their
function. For a more detailed description of what drives the diagnostic LED operation, refer to
the Intel® S5000 Server Board Family Datasheet.
7.1 5 V STBY
This LED is illuminated when AC is applied to the platform and 5 V standby voltage is supplied
to the server board by the power supply.
7.2 Fan Fault LEDs
Fan fault LEDs are present for all eight cooling fan headers. Each LED is located adjacent to its
corresponding header.
7.3 System ID LED, System Status LED and Post Code
Diagnostic LEDs
The server board provides LEDs for both system ID and system status. POST code diagnostic
LEDs are located on the back edge of the server board. See Appendix C for a complete
description of how these LEDs are read and for a list of all supported POST codes.
ID LED
Diag LEDS
Status
LED
Figure 12. System ID LED and System Status LED Locations
7.4 DIMM Fault LEDs
The server board provides a memory fault LED for each DIMM slot.
Revision 1.0
49
Intel order number – D36978-004
Light Guided Diagnostics
Intel® Server Board S5000VSA TPS
Figure 13. DIMM Fault LED Locations
Revision 1.0
50
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Light Guided Diagnostics
7.5 Processor Fault LEDs
The server board provides a fault LED for each processor socket.
CPU 2
CPU 1
Figure 14. Processor Fault LED Locations
Revision 1.0
51
Intel order number – D36978-004
Design and Environmental Specifications
8.
Intel® Server Board S5000VSA TPS
Design and Environmental Specifications
8.1 Server Board Design Specification
Operation of the server board at conditions beyond those shown in the following table may
cause permanent damage to the system. Exposure to absolute maximum rating conditions for
extended periods may affect system reliability.
Table 26: Board Design Specifications
Operating Temperature
5º C to 50º C 1 (32º F to 131º F)
Non-Operating Temperature
-40º C to 70º C (-40º F to 158º F)
DC Voltage
± 5% of all nominal voltages
Shock (Unpackaged)
Trapezoidal, 50 g, 170 inches/sec
Shock (Packaged) (≥ 40 lbs to < 80 lbs)
24 inches
Vibration (Unpackaged)
5 Hz to 500 Hz 3.13 g RMS random
Note:
Chassis design must provide proper airflow to avoid exceeding the Dual-Core Intel® Xeon®
processor 5000 sequence maximum case temperature.
Disclaimer Note: Intel Corporation server boards contain a number of high-density VLSI and
power delivery components that need adequate airflow to cool. Intel ensures through its own
chassis development and testing that when Intel server building blocks are used together, the
fully integrated system will meet the intended thermal requirements of these components. It is
the responsibility of the system integrator who chooses not to use Intel developed server
building blocks to consult vendor datasheets and operating parameters to determine the amount
of air flow required for their specific application and environmental conditions. Intel Corporation
cannot be held responsible, if components fail or the server board does not operate correctly
when used outside any of their published operating or non-operating limits.
Revision 1.0
52
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Design and Environmental Specifications
8.2 Processor Power Support
The server board supports the Thermal Design Point (TDP) guideline for Dual-Core Intel® Xeon®
processors 5000 sequence. The Flexible Motherboard Guidelines (FMB) has also been followed
to help determine the suggested thermal and current design values for anticipating future
processor needs. The following table provides maximum values for Icc, TDP power and TCASE
for the Dual-Core Intel® Xeon® processor 5000 sequence family.
Table 27. Dual-Core Intel® Xeon® processor 5000 sequence DP TDP Guidelines
TDP Power
130 W
Max TCASE
70º C
Icc MAX
150 A
Note: These values are for reference only. The processor EMTS contains the actual
specifications for the processor. If the values found in the EMTS are different then those
published here, the EMTS values will supersede these, and should be used.
8.3 Power Supply Specifications
This section provides power supply design guidelines for a system using the Intel® Server Board
S5000VSA, including voltage and current specifications, and power supply on/off sequencing
characteristics.
Revision 1.0
53
Intel order number – D36978-004
Design and Environmental Specifications
8.3.1
Intel® Server Board S5000VSA TPS
Output Power / Currents
The following table defines power and current ratings for the 550W power supply. The
combined output power of all outputs does not exceed the rated output power. The power
supply meets both static and dynamic voltage regulation requirements for the minimum loading
conditions.
Table 28. Load Ratings
Output
Voltage
+3V3
Notes:
1.
2.
3.
4.
5.
6.
7.
Load Range
Min.
Max.
1.0A
24A
Peak
+5V
2A
20A
+12V1
0.5A
24A
48A
+12V2
0.5A
17A
22A (500msec)
–12V
0A
0.5A
+5VSB
0A
2A
Maximum continuous total output power will not exceed 550W
The maximum continuous total output power capability increases at lower ambient
temperatures at a rate of 3.3W/ ºC up to 600W with a 30ºC ambient temperature
Maximum continuous load on the combined 12V output will not exceed 40A at 45ºC,
ramping up to 44A at 30ºC.
Peak load on the combined 12V output will not exceed 48A.
Peak total DC output power will not exceed 600W.
Peak power and current loading is support for a minimum of 12 seconds
Combined 3.3V and 5V power should not exceed 160W.
Revision 1.0
54
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
8.3.2
Design and Environmental Specifications
Grounding
The ground of the pins of the power supply output connector provides the power return path.
The output connector ground pins are connected to safety ground (power supply enclosure).
The power supply must be provided with a reliable protective earth ground. All secondary
circuits are connected to protective earth ground. Resistance of the ground returns to chassis
does not exceed 1.0 mΩ. This path may be used to carry DC current.
8.3.3
Standby Outputs
The 5 VSB output is present when an AC input greater than the power supply turn on voltage is
applied.
8.3.4
Remote Sense
The power supply has remote sense return (ReturnS) to regulate out ground drops for all output
voltages; +3.3 V, +5 V, +12 V1, +12 V2, -12 V, and 5 VSB. The power supply uses remote
sense to regulate out drops in the system for the +3.3 V, +5 V, and 12 V1 outputs. The remote
sense input impedance to the power supply is greater than 200 Ω on 3.3 VS, 5 VS. This is the
value of the resistor connecting the remote sense to the output voltage internal to the power
supply. Remote sense is able to regulate out a minimum of 200 mV drop on the +3.3 V output.
The remote sense return (ReturnS) is able to regulate out a minimum of 200 mV drop in the
power ground return. The current in any remote sense line is less than 5 mA to prevent voltage
sensing errors. The power supply operates within specification over the full range of voltage
drops from the power supply’s output connector to the remote sense points.
8.3.5
Voltage Regulation
The power supply output voltages are within the following voltage limits when operating at
steady state and dynamic loading conditions. These limits include the peak-peak ripple/noise.
All outputs are measured with reference to the return remote sense signal (ReturnS). The 5 V,
12 V1, 12 V2, –12 V and 5 VSB outputs are measured at the power supply connectors
referenced to ReturnS. The +3.3 V is measured at the remote sense signal (3.3 VS) located at
the signal connector.
Table 43. Voltage Regulation Limits
Parameter
+ 3.3V
Tolerance
- 5% / +5%
MIN
+3.14
+ 5V
- 5% / +5%
+4.75
+ 12V1
- 5% / +5%
+11.40
+ 12V2
- 5% / +5%
+11.40
- 12V
- 5% / +9%
-11.40
+ 5VSB
- 5% / +5%
+4.75
NOM
+3.30
MAX
+3.46
Units
Vrms
+5.00
+5.25
Vrms
+12.00
+12.60
Vrms
+12.00
+12.60
Vrms
-12.00
-13.08
Vrms
+5.00
+5.25
Vrms
Revision 1.0
55
Intel order number – D36978-004
Design and Environmental Specifications
8.3.6
Intel® Server Board S5000VSA TPS
Dynamic Loading
The output voltages are within limits specified for the step loading and capacitive loading
specified in the following table. The Δ step load may occur anywhere within the MIN load to the
MAX load conditions.
Table 29. Transient Load Requirements
Output
+3.3 VDC
+5 V
+12 V1
+12 V2
+5 VSB
Δ Step Load Size
(see note 2)
5.0 A
4.0 A
25.0 A
25.0 A
0.5 A
Load Slew Rate
Test Capacitive Load
0.25 A/μsec
0.25 A/μsec
0.25 A/μsec
0.25 A/μsec
0.25 A/μsec
250 μF
400 μF
2200 μF 1,2
2200 μF 1,2
20 μF
Notes:
1. Step loads on each 12 V output may happen simultaneously.
2. The +12 V should be tested with 2200 μF evenly split between the two +12 V rails.
8.3.7
Capacitive Loading
The power supply is stable and meets all requirements with the following capacitive loading
ranges.
Table 30. Capacitive Loading Conditions
Output
+3.3V
8.3.8
MIN
250
MAX
6,800
Units
μF
μF
+5V
400
4,700
+12V(1, 2)
500 each
11,000
μF
-12V
1
350
μF
+5VSB
20
350
μF
Closed loop stability
The power supply is unconditionally stable under all line/load/transient load conditions, including
capacitive load ranges. A minimum of: 45 degrees phase margin and -10dB-gain margin is
required. Closed-loop stability is ensured at the maximum and minimum loads as applicable.
8.3.9
Common Mode Noise
The common mode noise on any output does not exceed 350 mV pk-pk over the frequency
band of 10Hz to 20MHz.
1. The measurement shall be made across a 100 Ω resistor between each of DC outputs,
including ground, at the DC power connector and chassis ground (power subsystem enclosure).
2. The test set-up shall use an FET probe such as Tektronix* model P6046 or equivalent.
Revision 1.0
56
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
8.3.10
Design and Environmental Specifications
Ripple / Noise
The maximum allowed ripple/noise output of the power supply is defined in the following table.
This is measured over a bandwidth of 0 Hz to 20 MHz at the power supply output connectors.
Table 31. Ripple and Noise
+3.3V
50mVp-p
8.3.11
+5V
50mVp-p
+12V1/2
120mVp-p
-12V
120mVp-p
+5VSB
50mVp-p
Timing Requirements
The timing requirements for power supply operation are as follows. The output voltages must
rise from 10% to within regulation limits (Tvout_rise) within 5 to 70 ms, except for 5 VSB; it is
allowed to rise from 1.0 to 25 ms. The +3.3 V, +5 V and +12 V output voltages should start to
rise approximately at the same time. All outputs rise monotonically. The +5 V output needs to
be greater than the +3.3 V output during any point of the voltage rise. The +5 V output must
never be greater than the +3.3 V output by more than 2.25 V. Each output voltage shall reach
regulation within 50 ms (Tvout_on) of each other during turn on of the power supply. Each output
voltage shall fall out of regulation within 400 msec (Tvout_off) of each other during turn off. The
following figure shows the timing requirements for the power supply being turned on and off via
the AC input, with PSON held low and the PSON signal, with the AC input applied.
Table 32. Output Voltage Timing
Item
Tvout_rise
Description
Output voltage rise time from each main output.
Tvout_on
T vout_off
Minimum
5.0 *
Maximum
70 *
Units
msec
All main outputs must be within regulation of each
other within this time.
50
msec
All main outputs must leave regulation within this
time.
400
msec
Revision 1.0
57
Intel order number – D36978-004
Design and Environmental Specifications
Intel® Server Board S5000VSA TPS
Vout
V1
10%
Vout
V2
V3
V4
Tvout
rise
Tvout_off
Tvout_on
Figure 15. Output Voltage Timing
Table 33. Turn On / Off Timing
Item
Tsb_on_delay
Tac_on_delay
Tvout_holdup
Tpwok_holdup
Tpson_on_delay
Tpson_pwok
Tpwok_on
Tpwok_off
Tpwok_low
Tsb_vout
T5VSB_holdup
Description
Delay from AC being applied to 5VSB being within
regulation.
Delay from AC being applied to all output voltages being
within regulation.
Time all output voltages stay within regulation after loss of
AC.
Delay from loss of AC to de-assertion of PWOK
Delay from PSON# active to output voltages within regulation
limits.
Delay from PSON# de-active to PWOK being de-asserted.
Delay from output voltages within regulation limits to PWOK
asserted at turn on.
Delay from PWOK de-asserted to output voltages (3.3V, 5V,
12V, -12V) dropping out of regulation limits.
Duration of PWOK being in the de-asserted state during an
off/on cycle using AC or the PSON signal.
Delay from 5VSB being in regulation to O/Ps being in
regulation at AC turn on.
Time the 5VSB output voltage stays within regulation after
loss of AC.
Minimum
Maximum
1000
2500
20
msec
msec
400
50
100
1000
msec
100
70
msec
msec
msec
1
50
msec
msec
21
5
Units
msec
1000
msec
msec
Revision 1.0
58
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
8.3.12
Design and Environmental Specifications
Residual Voltage Immunity in Standby mode
The power supply is immune to any residual voltage placed on its outputs (typically a leakage
voltage through the system from standby output) up to 500 mV. There is neither additional heat
generated, nor stress of any internal components with this voltage applied to any individual
output, and all outputs simultaneously. It also does not trip the protection circuits during turn on.
The residual voltage at the power supply outputs for no load condition does not exceed 100 mV
when AC voltage is applied.
Revision 1.0
59
Intel order number – D36978-004
Regulatory and Certification Information
9.
Intel® Server Board S5000VSA TPS
Regulatory and Certification Information
WARNING
To ensure regulatory compliance, you must adhere to the assembly instructions in this guide to
ensure and maintain compliance with existing product certifications and approvals. Use only
the described, regulated components specified in this guide. Use of other products /
components will void the UL listing and other regulatory approvals of the product and will most
likely result in noncompliance with product regulations in the region(s) in which the product is
sold.
To help ensure EMC compliance with your local regional rules and regulations, before computer
integration, make sure that the chassis, power supply, and other modules have passed EMC
testing using a server board with a microprocessor from the same family (or higher) and
operating at the same (or higher) speed as the microprocessor used on this server board. The
final configuration of your end system product may require additional EMC compliance testing.
For more information please contact your local Intel Representative.
This is an FCC Class A device. Integration of it into a Class B chassis does not result in a
Class B device.
9.1 Product Regulatory Compliance
Intended Application – This product was evaluated as Information Technology Equipment
(ITE), which may be installed in offices, schools, computer rooms, and similar commercial type
locations. The suitability of this product for other product categories and environments (such as:
medical, industrial, telecommunications, NEBS, residential, alarm systems, test equipment,
etc.), other than an ITE application, may require further evaluation. This is an FCC Class A
device. Integration of it into a Class B chassis does not result in a Class B device.
9.1.1
Product Safety Compliance
UL60950 – CSA 60950(USA / Canada)
EN60950 (Europe)
IEC60950 (International)
CB Certificate & Report, IEC60950 (report to include all country national deviations)
GOST R 50377-92 – Listed on one System License (Russia)
Belarus License – Listed on System License (Belarus)
CE - Low Voltage Directive 73/23/EEE (Europe)
IRAM Certification (Argentina)
Revision 1.0
60
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
9.1.2
Regulatory and Certification Information
Product EMC Compliance – Class A Compliance
FCC /ICES-003 - Emissions (USA/Canada) Verification
CISPR 22 – Emissions (International)
EN55022 - Emissions (Europe)
EN55024 - Immunity (Europe)
CE – EMC Directive 89/336/EEC (Europe)
VCCI Emissions (Japan)
AS/NZS 3548 Emissions (Australia / New Zealand)
BSMI CNS13438 Emissions (Taiwan)
GOST R 29216-91 Emissions - Listed on one System License (Russia)
GOST R 50628-95 Immunity –Listed on one System License (Russia)
Belarus License – Listed on one System License (Belarus)
RRL MIC Notice No. 1997-41 (EMC) & 1997-42 (EMI) (Korea)
9.1.3
Certifications / Registrations / Declarations
UL Certification or NRTL (US/Canada)
CE Declaration of Conformity (CENELEC Europe)
FCC/ICES-003 Class A Attestation (USA/Canada)
C-Tick Declaration of Conformity (Australia)
MED Declaration of Conformity (New Zealand)
BSMI Certification (Taiwan)
GOST – Listed on one System License (Russia)
Belarus – Listed on one System License (Belarus)
RRL Certification (Korea)
Ecology Declaration (International)
Revision 1.0
61
Intel order number – D36978-004
Regulatory and Certification Information
Intel® Server Board S5000VSA TPS
9.2 Product Regulatory Compliance Markings
The Intel server board is provided with the following regulatory marks.
Regulatory Compliance
Region
UL Mark
USA/Canada
CE Mark
Europe
EMC Marking (Class A)
Canada
BSMI Marking (Class A)
Taiwan
C-tick Marking
Australia / New
Zealand
RRL MIC Mark
Korea
GOST-R Mark
Russia
Marking
CANADA ICES-003 CLASS A
CANADA NMB-003 CLASSE A
Revision 1.0
62
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
Regulatory and Certification Information
9.3 Electromagnetic Compatibility Notices
9.3.1
FCC Verification Statement (USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Intel Corporation
5200 N.E. Elam Young Parkway
Hillsboro, OR 97124-6497
Phone: 1-800-628-8686
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the grantee of this device could void
the user’s authority to operate the equipment. The customer is responsible for ensuring
compliance of the modified product.
All cables used to connect to peripherals must be shielded and grounded. Operation with
cables, connected to peripherals that are not shielded and grounded may result in interference
to radio and TV reception.
9.3.2
ICES-003 (Canada)
Cet appareil numérique respecte les limites bruits radioélectriques applicables aux
appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur:
“Appareils Numériques”, NMB-003 édictée par le Ministre Canadian des Communications.
English translation of the notice above:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Canadian Department of Communications.
Revision 1.0
63
Intel order number – D36978-004
Regulatory and Certification Information
9.3.3
Intel® Server Board S5000VSA TPS
Europe (CE Declaration of Conformity)
This product has been tested in accordance too, and complies with the Low Voltage Directive
(73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark
to illustrate its compliance.
9.3.4
VCCI (Japan)
English translation of the notice above:
This is a Class B product based on the standard of the Voluntary Control Council for
Interference (VCCI) from Information Technology Equipment. If this is used near a radio or
television receiver in a domestic environment, it may cause radio interference. Install and use
the equipment according to the instruction manual.
9.3.5
BSMI (Taiwan)
The BSMI Certification Marking and EMC warning is located on the outside rear area of
the product.
9.3.6
RRL (Korea)
Following is the RRL certification information for Korea.
English translation of the notice above:
1.
2.
3.
4.
5.
Type of Equipment (Model Name): On License and Product
Certification No.: On RRL certificate. Obtain certificate from local Intel representative
Name of Certification Recipient: Intel Corporation
Date of Manufacturer: Refer to date code on product
Manufacturer/Nation: Intel Corporation/Refer to country of origin marked on product
Revision 1.0
64
Intel order number – D36978-004
Intel® Server Board S5000VSA TPS
9.3.7
Regulatory and Certification Information
CNCA (CCC-China)
The CCC Certification Marking and EMC warning is located on the outside rear area of
the product.
声明
此为A级产品,在生活环境中,该产品可能会造成无
线电干扰。在这种情况下,可能需要用户对其干扰采
取可行的措施。
9.4 Restriction of Hazardous Substances (RoHS)
Compliance
Intel has a system in place to restrict the use of banned substances in accordance with the
European Directive 2002/95/EC. Compliance is based on declaration that materials banned in
the RoHS Directive are either (1) below all applicable substance threshold limits or (2) an
approved/pending RoHS exemption applies.
Note: RoHS implementing details are not fully defined and may change.
Threshold limits and banned substances are noted below.
•
•
Quantity limit of 0.1% by mass (1000 PPM) for:
o Lead
o Mercury
o Hexavalent Chromium
o Polybrominated Biphenyls Diphenyl Ethers (PBDE)
Quantity limit of 0.01% by mass (100 PPM) for:
o Cadmium
Revision 1.0
65
Intel order number – D36978-004
Appendix A: Integration and Usage Tips
Intel® Server Board S5000VSA TPS
Appendix A: Integration and Usage Tips
ƒ
ƒ
ƒ
ƒ
When adding or removing components or peripherals from the server board, AC power
must be removed. With AC plugged in to the server board, 5-volt standby is still present
even though the server board is powered off.
Processors must be installed in order. CPU 1 is located near the edge of the server
board and must be populated to operate the board.
On the back edge of the server board are four diagnostic LEDs which display a
sequence of red, green, or amber POST codes during the boot process. Should your
server board hang during POST, the LEDs will display the last POST event run before
the hang.
Memory DIMMs must be installed in pairs across branches in similarly numbered slots
(ex. A2 and B2). Upgrade pairs must be identical with respect to size, speed, and
organization.
Revision 1.0
66
Intel order number – D36978-004
Intel® Server Board S5000VSA
Appendix B: Sensor Tables
Appendix B: Sensor Tables
This appendix lists the sensor identification numbers and information regarding the sensor type,
name, supported thresholds, assertion and de-assertion information, and a brief description of
the sensor purpose. See the Intelligent Platform Management Interface Specification, Version
1.5, for sensor and event/reading-type table information.
ƒ
Sensor Type
The Sensor Type references the values enumerated in the Sensor Type Codes table in
the IPMI specification. It provides the context in which to interpret the sensor, e.g., the
physical entity or characteristic that is represented by this sensor.
ƒ
Event / Reading Type
The Event/Reading Type references values from the Event/Reading Type Code Ranges
and Generic Event/Reading Type Codes tables in the IPMI specification. Note that digital
sensors are a specific type of discrete sensors, which have only two states.
ƒ
Event Offset/Triggers
Event Thresholds are ‘supported event generating thresholds’ for threshold types of
sensors.
-
[u,l][nr,c,nc]
upper nonrecoverable, upper critical, upper noncritical, lower
nonrecoverable, lower critical, lower noncritical
uc, lc
upper critical, lower critical
Event Triggers are ‘supported event generating offsets’ for discrete type sensors.
The offsets can be found in the Generic Event/Reading Type Codes or Sensor Type
Codes tables in the IPMI specification, depending on whether the sensor event/reading
type is generic or a sensor specific response.
ƒ
Assertion / De-assertion Enables
Assertions and De-assertion indicators reveals the type of events the sensor can
generate:
- As: Assertions
- De: De-assertion
ƒ
Readable Value / Offsets
- Readable Value indicates the type of value returned for threshold and other nondiscrete type sensors.
-
ƒ
Readable Offsets indicates the offsets for discrete sensors that are readable via the
Get Sensor Reading command. Unless otherwise indicated, all Event Triggers are
readable, i.e., Readable Offsets consists of the reading type offsets that do not
generate events.
Event Data
This is the data that is included in an event message generated by the associated
sensor. For threshold-based sensors, the following abbreviations are used:
- R: Reading value
- T: Threshold value
Revision 1.0
67
Intel order number – D36978-004
Appendix B: Sensor Tables
Intel® Server Board S5000VSA TPS
Table 34. BMC Sensors
Sensor
Name
Sensor
Number
Power
Unit
Status
01h
Power
Unit
Redundancy
02h
System
Applica
-bility
All
Chassis
specific
Senso
r Type
Power
Unit
09h
Power
Unit
09h
Event /
Reading
Type
Sensor
Specific
6Fh
Generic
0Bh
Watchd
og
03h
All
Watch
dog 2
23h
Sensor
Specific
6Fh
Platfor
m
Securit
y
Violatio
n
04h
All
Sensor
Specific
6Fh
Physic
al
Securit
y
05h
Chassis
Intrusio
n is
chassis
specific
Platfor
m
Securit
y
Violatio
n
Attemp
t
06h
Physic
al
Securit
y
05h
Sensor
Specific
6Fh
Event
Offset
Triggers
Power
down
Power
cycle
A/C lost
Soft power
control
failure
Power unit
failure
Predictive
failure
Redundanc
y regained
Non-red:
suff res
from
redund
Redundanc
y lost
Redundanc
y degraded
Non-red:
suff from
insuff
Non-red:
insufficient
Redun
degrade
from full
Redun
degrade
from nonredundant
Timer
expired,
status only
Hard reset
Power
down
Power
cycle
Timer
interrupt
Secure
mode
violation
attempt
Out-ofband
access
password
violation
Chassis
intrusion
LAN leash
lost 1
Criticality
Assert /
Deassert
As
Readable
Value /
Offsets
–
As
OK
Event
Data
Rearm
Stand
-by
Trig
Offset
A
X
–
Trig
Offset
A
X
As
–
Trig
Offset
A
X
OK
As
–
Trig
Offset
A
X
OK
As and
De
–
Trig
Offset
A
X
OK
Crit
Non-Crit
OK
Degraded
OK
Critical
OK
Revision 1.0
68
Intel order number – D36978-004
Intel® Server Board S5000VSA
Sensor
Name
Sensor
Number
FP
Diag
Interru
pt
(NMI)
07h
System
Applica
-bility
All
System
Event
Log
09h
All
Sessio
n Audit
0Ah
All
System
Event
('Syste
m
Event')
0Bh
BB
+1.2V
Vtt
BB+1.8
V NIC
Core
BB
+1.5V
AUX
BB
+1.5V
Senso
r Type
Critical
Interru
pt
13h
Appendix B: Sensor Tables
Event /
Reading
Type
Sensor
Specific
6Fh
Event
Loggin
g
Disable
d
10h
Sessio
n Audit
2Ah
Sensor
Specific
6Fh
All
System
Event
12h
Sensor
Specific
6Fh
10h
All
Threshold
01h
11h
All
12h
All
13h
All
BB
+1.8V
14h
All
BB
+3.3V
15h
All
BB
+3.3V
STB
BB
+1.5V
ESB
BB
+5V
16h
All
17h
All
18h
All
BB
+1.2V
NIC
BB
+12V
AUX
BB
0.9V
19h
All
1Ah
All
1Bh
All
BB
Vbat
1Eh
All
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Sensor
Specific
6Fh
Event
Offset
Triggers
Front panel
NMI /
diagnostic
interrupt
Bus
uncorrecta
ble error
Log area
reset /
cleared
00h –
Session
activation
01h –
Session
deactivatio
n
00 –
System
reconfigure
d
04 – PEF
action
[u,l] [c,nc]
Criticality
OK
Assert /
Deassert
As
Readable
Value /
Offsets
–
OK
As
OK
Event
Data
Rearm
Stand
-by
Trig
Offset
A
–
–
Trig
Offset
A
X
As
–
As
defined
by IPMI
A
X
OK
As
–
Trig
Offset
A
X
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
X
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
X
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
X
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Digital
Discrete
05h
01h – Limit
exceeded
Critical
As and
De
–
R, T
A
X
Revision 1.0
69
Intel order number – D36978-004
Appendix B: Sensor Tables
Sensor
Name
Sensor
Number
BB
Temp
30h
System
Applica
-bility
All
Front
Panel
Temp
BNB
Temp
32h
All
33h
All
Tach
Fan 1
50h
Tach
Fan 2
51h
Tach
Fan 3
52h
Tach
Fan 4
53h
Tach
Fan 5
54h
Tach
Fan 6
55h
Tach
Fan 7
56h
Tach
Fan 8
57h
Tach
Fan 9
58h
Tach
Fan 10
59h
Fan 1
Presen
t
Fan 2
Presen
t
Fan 3
Presen
t
Fan 4
Presen
t
Fan 5
Presen
t
Fan 6
Presen
t
Fan 7
Presen
t
Fan 8
Presen
t
60h
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
61h
62h
63h
64h
65h
66h
67h
Senso
r Type
Intel® Server Board S5000VSA TPS
Threshold
defined
Assert /
Deassert
As and
De
Readable
Value /
Offsets
Analog
R, T
A
X
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
X
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Threshold
01h
[l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
M
–
Fan
04h
Generic
08h
Device
present
OK
As and
De
–
T
A
–
Fan
04h
Generic
08h
Device
present
OK
As and
De
–
T
A
–
Fan
04h
Generic
08h
Device
present
OK
As and
De
–
T
A
–
Fan
04h
Generic
08h
Device
present
OK
As and
De
–
T
A
–
Fan
04h
Generic
08h
Device
present
OK
As and
De
–
T
A
–
Fan
04h
Generic
08h
Device
present
OK
As and
De
–
T
A
–
Fan
04h
Generic
08h
Device
present
OK
As and
De
–
T
A
–
Fan
04h
Generic
08h
Device
present
OK
As and
De
–
T
A
–
Tempe
rature
01h
Tempe
rature
01h
Tempe
rature
01h
Fan
04h
Event /
Reading
Type
Threshold
01h
Event
Offset
Triggers
[u,l] [c,nc]
Threshold
01h
Criticality
Event
Data
Rearm
Revision 1.0
70
Intel order number – D36978-004
Stand
-by
Intel® Server Board S5000VSA
Sensor
Name
Sensor
Number
Fan 9
Presen
t
Fan 10
Presen
t
Fan
Redundancy
68h
Power
Supply
Status
1
Power
Supply
Status
2
Power
Nozzle
Power
Supply
1
Power
Nozzle
Power
Supply
2
Power
Gauge
V1 rail
(+12v)
Power
Supply
1
69h
6Fh
70h
71h
System
Applica
-bility
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Chassis
specific
Senso
r Type
Appendix B: Sensor Tables
Fan
04h
Event /
Reading
Type
Generic
08h
Event
Offset
Triggers
Device
present
Fan
04h
Generic
08h
Device
present
Fan
04h
Generic
0Bh
Redundanc
y regained
Redundanc
y lost
Redundanc
y degraded
Non-red:
suff res
from
redund
Non-red:
suff from
insuff
Non-red:
insufficient
Redun
degrade
from full
Redun
degrade
from nonredundant
Presence
Failure
Predictive
fail
A/C lost
Configurati
on error
Presence
Failure
Predictive
fail
A/C lost
Configurati
on error
[u] [c,nc]
Power
Supply
08h
Power
Supply
08h
Sensor
Specific
6Fh
Sensor
Specific
6Fh
Criticality
Assert /
Deassert
As and
De
Readable
Value /
Offsets
–
T
A
–
OK
As and
De
–
T
A
–
OK
As
–
Trig
Offset
A
X
As and
De
–
Trig
Offset
A
X
As and
De
–
Trig
Offset
A
X
Threshold
defined
As and
De
Analog
R, T
A
–
OK
Event
Data
Rearm
Stand
-by
Degraded
OK
Critical
OK
OK
Critical
Non-Crit
Critical
Non-Crit
OK
Critical
Non-Crit
Critical
Non-Crit
78h
Chassis
specific
Current
03h
Threshold
01h
79h
Chassis
specific
Current
03h
Threshold
01h
[u] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
7Ah
Chassis
specific
Current
03h
Threshold
01h
[u] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Revision 1.0
71
Intel order number – D36978-004
Appendix B: Sensor Tables
Sensor
Name
Sensor
Number
Power
Gauge
V1 rail
(+12v)
Power
Supply
2
Power
Gauge
(aggregate
power)
Power
Supply
1
Power
Gauge
(aggre
gate
power)
Power
Supply
2
System
ACPI
Power
State
7Bh
System
Applica
-bility
Chassis
specific
Senso
r Type
Current
03h
Intel® Server Board S5000VSA TPS
Event /
Reading
Type
Threshold
01h
Event
Offset
Triggers
[u] [c,nc]
Criticality
Threshold
defined
Assert /
Deassert
As and
De
Readable
Value /
Offsets
Analog
Event
Data
Rearm
Stand
-by
R, T
A
–
7Ch
Chassis
specific
Other
Units
0Bh
Threshold
01h
[u] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
7Dh
Chassis
specific
Other
Units
0Bh
Threshold
01h
[u] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
82h
All
System
ACPI
Power
State
22h
Sensor
Specific
6Fh
OK
As
–
Trig
Offset
A
X
Button
84h
All
Button
14h
Sensor
Specific
6Fh
OK
As
–
Trig
Offset
A
X
SMI
Timeou
t
85h
All
Digital
Discrete
03h
Critical
As and
De
–
Trig
Offset
A
–
Sensor
Failure
86h
All
SMI
Timeou
t
F3h
Sensor
Failure
F6h
S0 / G0
S1
S3
S4
S5 / G2
G3
mechanical
off
Power
button
Reset
button
01h – State
asserted
OK
As
–
Trig
Offset
A
X
NMI
Signal
State
SMI
Signal
State
Proc 1
Status
87h
All
OEM
C0h
OK
–
01h
–
–
–
88h
All
OEM
C0h
01h – State
asserted
OK
–
01h
–
–
–
90h
All
Proces
sor
07h
Digital
Discrete
03h
Digital
Discrete
03h
Sensor
Specific
6Fh
I C device
not found
2
I C device
error
detected
2
I C bus
timeout
01h – State
asserted
IERR
Thermal
trip
Config
error
Presence
Disabled
Critical
Non-rec
As and
De
–
Trig
Offset
M
X
As and
De
–
Trig
Offset
M
X
Proc 2
Status
91h
All
Proces
sor
07h
OEM
Sensor
Specific
73h
Sensor
Specific
6Fh
2
IERR
Thermal
trip
Config
error
Critical
OK
Degraded
Critical
Non-rec
Critical
Revision 1.0
72
Intel order number – D36978-004
Intel® Server Board S5000VSA
Sensor
Name
Sensor
Number
System
Applica
-bility
Proc 1
Temp
98h
All
Proc 2
Temp
9Ah
All
PCIe
Link0
A0h
PCIe
Link1
PCIe
Link2
PCIe
Link3
PCIe
Link4
PCIe
Link5
PCIe
Link6
PCIe
Link7
PCIe
Link8
A1h
A2h
A3h
A4h
A5h
A6h
A7h
A8h
Senso
r Type
Appendix B: Sensor Tables
Event /
Reading
Type
Event
Offset
Triggers
Presence
Disabled
Criticality
Assert /
Deassert
Readable
Value /
Offsets
Event
Data
Rearm
Stand
-by
OK
Degraded
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Critical
Interrup
t
13F
Tempe
rature
01h
Tempe
rature
01h
Sensor
Specifi
c
6Fh
PCIe
Link0
OK
As
–
See the
BIOS
EPS
A
–
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link1
As
–
See the
BIOS
EPS
A
–
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link2
As
–
See the
BIOS
EPS
A
–
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link3
As
–
See the
BIOS
EPS
A
–
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link4
As
–
See the
BIOS
EPS
A
–
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link5
As
–
See the
BIOS
EPS
A
–
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link6
As
–
See the
BIOS
EPS
A
–
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link7
As
–
See the
BIOS
EPS
A
–
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link8
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
As
–
See the
BIOS
EPS
A
–
Degraded
OK
Degraded
OK
Degraded
OK
Degraded
OK
Degraded
OK
Degraded
OK
Degraded
OK
Degraded
OK
Degraded
Revision 1.0
73
Intel order number – D36978-004
Appendix B: Sensor Tables
Sensor
Name
Sensor
Number
PCIe
Link9
A9h
System
Applica
-bility
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link10
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link11
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link12
Critical
Interrup
t
13F
Sensor
Specifi
c
6Fh
PCIe
Link13
C0h
All
Tempe
rature
01h
Threshold
01h
C1h
All
Tempe
rature
01h
Threshold
01h
C8h
All
Tempe
rature
01h
C9h
All
D0h
All
Proc 2
Vcc
D1h
All
Proc 1
Vcc
Out-ofRange
Proc 2
Vcc
Out-ofRange
CPU
Populat
ion
Error
D2h
All
D3h
D8h
PCIe
Link10
PCIe
Link11
PCIe
Link12
PCIe
Link13
Proc 1
Therm
al
Control
Proc 2
Therm
al
Control
Proc 1
VRD
Over
Temp
Proc 2
VRD
Over
Temp
Proc 1
Vcc
AAh
ABh
ACh
ADh
Senso
r Type
Intel® Server Board S5000VSA TPS
Event /
Reading
Type
PCIe
Link9
Event
Offset
Triggers
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
Bus
correctable
error
Bus
uncorrecta
ble error
[u] [c,nc]
Criticality
OK
Assert /
Deassert
As
Readable
Value /
Offsets
–
As
Event
Data
Rearm
Stand
-by
See the
BIOS
EPS
A
–
–
See the
BIOS
EPS
A
–
As
–
See the
BIOS
EPS
A
–
As
–
See the
BIOS
EPS
A
–
As
–
See the
BIOS
EPS
A
–
Threshold
defined
As and
De
Analog
Trig
Offset
M
–
[u] [c,nc]
Threshold
defined
As and
De
Analog
Trig
Offset
M
–
Digital
Discrete
05h
01h – Limit
exceeded
Non-Critical
As and
De
–
Trig
Offset
M
–
Tempe
rature
01h
Digital
Discrete
05h
01h – Limit
exceeded
Non-Critical
As and
De
–
Trig
Offset
M
–
Voltag
e
02h
Voltag
e
02h
Voltag
e
02h
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Threshold
01h
[u,l] [c,nc]
Threshold
defined
As and
De
Analog
R, T
A
–
Digital
Discrete
05h
01h – Limit
exceeded
Non-Critical
As and
De
Discrete
R, T
A
–
All
Voltag
e
02h
Digital
Discrete
05h
01h – Limit
exceeded
Non-Critical
As and
De
Discrete
R, T
A
–
All
Proces
sor
07h
Generic
03h
01h –State
asserted
Critical
As and
De
–
R, T
A
–
Degraded
OK
Degraded
OK
Degraded
OK
Degraded
OK
Degraded
Revision 1.0
74
Intel order number – D36978-004
Intel® Server Board S5000VSA
Sensor
Name
Sensor
Number
DIMM
1A
E0h
DIMM
2A
DIMM
1B
DIMM
2B
DIMM
1C
DIMM
2C
DIMM
1D
DIMM
2D
E1h
E2h
E3h
E4h
E5h
E6h
E7h
System
Applica
-bility
All
All
All
All
All
All
All
All
Senso
r Type
Slot
Conne
ctor
21h
Slot
Conne
ctor
21h
Slot
Conne
ctor
21h
Slot
Conne
ctor
21h
Slot
Conne
ctor
21h
Slot
Conne
ctor
21h
Slot
Conne
ctor
21h
Slot
Conne
ctor
21h
Appendix B: Sensor Tables
Event /
Reading
Type
Sensor
Specific
6Fh
Sensor
Specific
6Fh
Sensor
Specific
6Fh
Sensor
Specific
6Fh
Sensor
Specific
6Fh
Sensor
Specific
6Fh
Sensor
Specific
6Fh
Sensor
Specific
6Fh
Memor
yA
Error
ECh
All
Memor
y
0Ch
Sensor
Specific
6Fh
Memor
yB
Error
EDh
System
specific
Memor
y
0Ch
Sensor
Specific
6Fh
Event
Offset
Triggers
Fault status
asserted
Device
installed
Disabled
Criticality
Degraded
Degraded
Readable
Value /
Offsets
–
As
Event
Data
Rearm
Stand
-by
Trig
Offset
A
–
–
Trig
Offset
A
–
As
–
Trig
Offset
A
–
As
–
Trig
Offset
A
–
As
–
Trig
Offset
A
–
As
–
Trig
Offset
A
–
As
–
Trig
Offset
A
–
As
–
Trig
Offset
A
–
OK
OK
As
–
Trig
Offset
A
–
OK
As
–
Trig
Offset
A
–
OK
Sparing
OK
Fault status
asserted
Device
installed
Disabled
Degraded
Degraded
Sparing
OK
Fault status
asserted
Device
installed
Disabled
Degraded
Degraded
Sparing
OK
Fault status
asserted
Device
installed
Disabled
Degraded
Degraded
OK
OK
OK
Sparing
OK
Fault status
asserted
Device
installed
Disabled
Degraded
Degraded
OK
Sparing
OK
Fault status
asserted
Device
installed
Disabled
Degraded
Degraded
Sparing
OK
Fault status
asserted
Device
installed
Disabled
Degraded
Degraded
Sparing
OK
Fault status
asserted
Device
installed
Disabled
Degraded
Sparing
Correctable
ECC
Uncorrecta
ble ECC
Correctable
ECC
Uncorrecta
ble ECC
Assert /
Deassert
As
OK
OK
OK
Degraded
Revision 1.0
75
Intel order number – D36978-004
Appendix B: Sensor Tables
Sensor
Name
Sensor
Number
Memor
yC
Error
EEh
Memor
yD
Error
B0
DIMM
Sparin
g
Enable
d
B0
DIMM
Sparin
g
Redundancy
B1
DIMM
Sparin
g
Enable
d
B1
DIMM
Sparin
g
Redundancy
B01
DIMM
Mirrorin
g
Enable
d
B01
DIMM
Mirrorin
g
Redundancy
Senso
r Type
Intel® Server Board S5000VSA TPS
System
Applica
-bility
System
specific
Memor
y
0Ch
Event /
Reading
Type
Sensor
Specific
6Fh
EFh
System
specific
Memor
y
0Ch
Sensor
Specific
6Fh
F0h
All
Entity
Presen
ce
25h
Sensor
Specific
6Fh
F1h
All
Memor
y
0Ch
Discrete
0Bh
F2h
All
Entity
Presen
ce
25h
Sensor
Specific
6Fh
F3h
All
Memor
y
0Ch
Discrete
0Bh
F4h
All
Entity
Presen
ce
25h
Sensor
Specific
6Fh
F5h
All
Memor
y
0Ch
Discrete
0Bh
Event
Offset
Triggers
Correctable
ECC
Uncorrecta
ble ECC
Correctable
ECC
Uncorrecta
ble ECC
Entity
present
Criticality
OK
Assert /
Deassert
As
Readable
Value /
Offsets
–
OK
As
OK
Fully
redundant
Non-red:
suff res
from
redund
Non-red:
suff res
from insuff
res
Non-red:
Insuff res
Entity
present
OK
Event
Data
Rearm
Stand
-by
Trig
Offset
A
–
–
Trig
Offset
A
–
As
–
Trig
Offset
A
–
As
–
Trig
Offset
A
–
OK
As
–
Trig
Offset
A
–
Fully
redundant
Non-red:
suff res
from
redund
Non-red:
suff res
from insuff
res
Non-red:
insuff res
Entity
present
OK
As
–
Trig
Offset
A
–
OK
As
–
Trig
Offset
A
–
Fully
redundant
Nonred:suff res
from
redund
Nonred:suff res
from insuff
res
Non-red:
insuff res
OK
As
–
Trig
Offset
A
–
Degraded
Crtical
Degraded
Crtical
Degraded
Crtical
Note 1: Not supported except for ESB2 embedded NICs
Revision 1.0
76
Intel order number – D36978-004
Intel® Server Board S5000VSA
Appendix C: POST Code Diagnostic LEDs
Appendix C: POST Code Diagnostic LEDs
All port 80 codes are displayed using the diagnostic LEDs found on the back edge of the
baseboard. The diagnostic LED feature consists of a hardware decoder and four dual color
LEDs. During POST, the LEDs will display all normal POST codes representing the progress of
the BIOS POST. Each code will be represented by a combination of colors from the four LEDs.
The LEDs are capable of displaying three colors: green, red, and amber. The POST codes are
divided into two nibbles, an upper nibble and a lower nibble. Each bit in the upper nibble is
represented by a Red LED and each bit in the lower nibble is represented by a green LED. If
both bits are set in the upper and lower nibbles then both red and green LEDs are lit, resulting
in an amber color. If both bits are clear, then the LED is off.
In the below example, BIOS sends a value of ACh to the diagnostic LED decoder. The LEDs
are decoded as follows:
•
•
Red bits = 1010b = Ah
Green bits = 1100b = Ch
Since the red bits correspond to the upper nibble and the green bits correspond to the lower
nibble, the two are concatenated to be ACh.
Table 35: POST Progress Code LED Example
LEDs
Ach
1
Red
Result
Amber
Green
1
Red
0
Green
Green
1
Red
1
Red
MSB
Green
0
Red
0
Green
0
Off
LSB
Revision 1.0
77
Intel order number – D36978-004
Appendix C: POST Code Diagnostic LEDs
Intel® Server Board S5000VSA TPS
Table 36: Diagnostic LED POST Code Decoder
Diagnostic LED Decoder
G=Green, R=Red, A=Amber
MSB
LSB
Host Processor
Description
Checkpoint
0x10h
OFF
OFF
OFF
R
Power-on initialization of the host processor (bootstrap processor)
0x11h
OFF
OFF
OFF
A
Host processor cache initialization (including AP)
0x12h
OFF
OFF
G
R
Starting application processor initialization
0x13h
OFF
OFF
G
A
SMM initialization
OFF
OFF
R
G
Initializing a chipset component
OFF
OFF
A
OFF
0x23h
OFF
OFF
A
G
0x24h
OFF
G
R
OFF
Programming timing parameters in the memory controller
0x25h
OFF
G
R
G
Configuring memory parameters in the memory controller
0x26h
OFF
G
A
OFF
Optimizing memory controller settings
0x27h
OFF
G
A
G
Initializing memory, such as ECC init
0x28h
G
OFF
R
OFF
0x50h
OFF
R
OFF
R
Enumerating PCI busses
0x51h
OFF
R
OFF
A
Allocating resources to PCI busses
0x52h
OFF
R
G
R
Hot Plug PCI controller initialization
0x53h
OFF
R
G
A
Reserved for PCI bus
Chipset
0x21h
Memory
0x22h
Reading configuration data from memory (SPD on DIMM)
Detecting presence of memory
Testing memory
PCI Bus
0x54h
OFF
A
OFF
R
Reserved for PCI bus
0x55h
OFF
A
OFF
A
Reserved for PCI bus
0x56h
OFF
A
G
R
Reserved for PCI bus
0x57h
OFF
A
G
A
Reserved for PCI bus
0x58h
G
R
OFF
R
Resetting USB bus
0x59h
G
R
OFF
A
Reserved for USB devices
USB
ATA / ATAPI / SATA
0x5Ah
G
R
G
R
Resetting PATA / SATA bus and all devices
0x5Bh
G
R
G
A
Reserved for ATA
0x5Ch
G
A
OFF
R
Resetting SMBUS
0x5Dh
G
A
OFF
A
Reserved for SMBUS
0x70h
OFF
R
R
R
Resetting the video controller (VGA)
0x71h
OFF
R
R
A
Disabling the video controller (VGA)
0x72h
OFF
R
A
R
Enabling the video controller (VGA)
SMBUS
Local Console
Remote Console
0x78h
G
R
R
R
Resetting the console controller
0x79h
G
R
R
A
Disabling the console controller
Revision 1.0
78
Intel order number – D36978-004
Intel® Server Board S5000VSA
Checkpoint
0x7Ah
Appendix C: POST Code Diagnostic LEDs
Diagnostic LED Decoder
G=Green, R=Red, A=Amber
MSB
LSB
G
R
A
R
Description
Enabling the console controller
Keyboard (PS2 or USB)
0x90h
R
OFF
OFF
R
Resetting the keyboard
0x91h
R
OFF
OFF
A
Disabling the keyboard
0x92h
R
OFF
G
R
Detecting the presence of the keyboard
0x93h
R
OFF
G
A
Enabling the keyboard
0x94h
R
G
OFF
R
Clearing keyboard input buffer
0x95h
R
G
OFF
A
Instructing keyboard controller to run Self Test (PS2 only)
Mouse (PS2 or USB)
0x98h
A
OFF
OFF
R
Resetting the mouse
0x99h
A
OFF
OFF
A
Detecting the mouse
0x9Ah
A
OFF
G
R
Detecting the presence of mouse
0x9Bh
A
OFF
G
A
Enabling the mouse
0xB0h
R
OFF
R
R
Resetting fixed media device
0xB1h
R
OFF
R
A
Disabling fixed media device
Fixed Media
0xB2h
0xB3h
R
OFF
A
R
Detecting presence of a fixed media device (IDE hard drive detection,
etc.)
R
OFF
A
A
Enabling / configuring a fixed media device
Removable Media
0xB8h
A
OFF
R
R
Resetting removable media device
0xB9h
A
OFF
R
A
Disabling removable media device
A
OFF
A
R
Detecting presence of a removable media device (IDE CDROM
detection, etc.)
A
G
R
R
Enabling / configuring a removable media device
R
Trying boot device selection
0xBAh
0xBCh
Boot Device Selection
0xD0
R
R
OFF
0xD1
R
R
OFF
A
Trying boot device selection
0xD2
R
R
G
R
Trying boot device selection
0xD3
R
R
G
A
Trying boot device selection
0xD4
R
A
OFF
R
Trying boot device selection
0xD5
R
A
OFF
A
Trying boot device selection
0xD6
R
A
G
R
Trying boot device selection
0xD7
R
A
G
A
Trying boot device selection
0xD8
A
R
OFF
R
Trying boot device selection
0xD9
A
R
OFF
A
Trying boot device selection
0XDA
A
R
G
R
Trying boot device selection
0xDB
A
R
G
A
Trying boot device selection
0xDC
A
A
OFF
R
Trying boot device selection
0xDE
A
A
G
R
Trying boot device selection
0xDF
A
A
G
A
Trying boot device selection
R
OFF
Pre-EFI Initialization (PEI) Core
0xE0h
R
R
Started dispatching early initialization modules (PEIM)
Revision 1.0
79
Intel order number – D36978-004
Appendix C: POST Code Diagnostic LEDs
Checkpoint
0xE2h
Diagnostic LED Decoder
G=Green, R=Red, A=Amber
MSB
LSB
R
R
A
OFF
Intel® Server Board S5000VSA TPS
Description
Initial memory found, configured, and installed correctly
0xE1h
R
R
R
G
Reserved for initialization module use (PEIM)
0xE3h
R
R
A
G
Reserved for initialization module use (PEIM)
Driver Execution Environment (DXE) Core
0xE4h
R
A
R
OFF
0xE5h
R
A
R
G
Started dispatching drivers
Entered EFI driver execution phase (DXE)
0xE6h
R
A
A
OFF
Started connecting drivers
0xE7h
R
A
A
G
0xE8h
A
R
R
OFF
Checking password
0xE9h
A
R
R
G
Entering BIOS setup
0xEAh
A
R
A
OFF
Flash Update
0xEEh
A
A
A
OFF
Calling Int 19. One beep unless silent boot is enabled.
0xEFh
A
A
A
G
DXE Drivers
Waiting for user input
Unrecoverable boot failure / S3 resume failure
Runtime Phase / EFI Operating System Boot
0xF4h
R
A
R
R
Entering Sleep state
0xF5h
R
A
R
A
Exiting Sleep state
A
R
R
R
Operating system has requested EFI to close boot services
(ExitBootServices ( ) has been called)
A
R
R
A
Operating system has switched to virtual address mode
(SetVirtualAddressMap ( ) has been called)
A
R
A
R
Operating system has requested the system to reset (ResetSystem ()
has been called)
0xF8h
0xF9h
0xFAh
Pre-EFI Initialization Module (PEIM) / Recovery
0x30h
OFF
OFF
R
R
Crisis recovery has been initiated because of a user request
0x31h
OFF
OFF
R
A
Crisis recovery has been initiated by software (corrupt flash)
0x34h
OFF
G
R
R
Loading crisis recovery capsule
0x35h
OFF
G
R
A
Handing off control to the crisis recovery capsule
0x3Fh
G
G
A
A
Unable to complete crisis recovery.
Revision 1.0
80
Intel order number – D36978-004
Intel® Server Board S5000VSA
Glossary
Glossary
This appendix contains important terms used in the preceding chapters. For ease of use,
numeric entries are listed first (e.g., “82460GX”) with alpha entries following (e.g., “AGP 4x”).
Acronyms are then entered in their respective place, with non-acronyms following.
Term
ACPI
Definition
Advanced Configuration and Power Interface
AP
Application Processor
APIC
Advanced Programmable Interrupt Control
ASIC
Application Specific Integrated Circuit
BIOS
Basic Input/Output System
BIST
Built-In Self Test
BMC
Baseboard Management Controller
Bridge
Circuitry connecting one computer bus to another, allowing an agent on one to access the other
BSP
Bootstrap Processor
byte
8-bit quantity.
CBC
Chassis Bridge Controller (A microcontroller connected to one or more other CBCs, together they
bridge the IPMB buses of multiple chassis.
CEK
Common Enabling Kit
CHAP
Challenge Handshake Authentication Protocol
CMOS
In terms of this specification, this describes the PC-AT compatible region of battery-backed 128 bytes
of memory, which normally resides on the server board.
DPC
Direct Platform Control
EEPROM
Electrically Erasable Programmable Read-Only Memory
EHCI
Enhanced Host Controller Interface
EMP
Emergency Management Port
EPS
External Product Specification
FMB
Flexible Mother Board
FMC
Flex Management Connector
FMM
Flex Management Module
FRB
Fault Resilient Booting
FRU
Field Replaceable Unit
FSB
Front Side Bus
GB
1024MB
GPIO
General Purpose I/O
GTL
Gunning Transceiver Logic
HSC
Hot-Swap Controller
Hz
Hertz (1 cycle/second)
I2C
Inter-Integrated Circuit Bus
IA
Intel® Architecture
IBF
Input Buffer
ICH
I/O Controller Hub
ICMB
Intelligent Chassis Management Bus
IERR
Internal Error
IFB
I/O and Firmware Bridge
Revision 1.0
81
Intel order number – D36978-004
Glossary
Intel® Server Board S5000VSA TPS
Term
INTR
Interrupt
Definition
IP
Internet Protocol
IPMB
Intelligent Platform Management Bus
IPMI
Intelligent Platform Management Interface
IR
Infrared
ITP
In-Target Probe
KB
1024 bytes
KCS
Keyboard Controller Style
LAN
Local Area Network
LCD
Liquid Crystal Display
LED
Light Emitting Diode
LPC
Low Pin Count
LUN
Logical Unit Number
MAC
Media Access Control
MB
1024KB
mBMC
National Semiconductor© PC87431x mini BMC
MCH
Memory Controller Hub
MD2
Message Digest 2 – Hashing Algorithm
MD5
Message Digest 5 – Hashing Algorithm – Higher Security
ms
milliseconds
MTTR
Memory Tpe Range Register
Mux
Multiplexor
NIC
Network Interface Controller
NMI
Nonmaskable Interrupt
OBF
Output Buffer
OEM
Original Equipment Manufacturer
Ohm
Unit of electrical resistance
PEF
Platform Event Filtering
PEP
Platform Event Paging
PIA
Platform Information Area (This feature configures the firmware for the platform hardware)
PLD
Programmable Logic Device
PMI
Platform Management Interrupt
POST
Power-On Self Test
PSMI
Power Supply Management Interface
PWM
Pulse-Width Modulation
RAM
Random Access Memory
RASUM
Reliability, Availability, Serviceability, Usability, and Manageability
RISC
Reduced Instruction Set Computing
ROM
Read Only Memory
RTC
Real-Time Clock (Component of ICH peripheral chip on the server board)
SDR
Sensor Data Record
SECC
Single Edge Connector Cartridge
SEEPROM
Serial Electrically Erasable Programmable Read-Only Memory
SEL
System Event Log
Revision 1.0
82
Intel order number – D36978-004
Intel® Server Board S5000VSA
Glossary
Term
Definition
SIO
Server Input/Output
SMI
System Management Interrupt (SMI is the highest priority nonmaskable interrupt)
SMM
System Management Mode
SMS
System Management Software
SNMP
Simple Network Management Protocol
TBD
To Be Determined
TIM
Thermal Interface Material
UART
Universal Asynchronous Receiver/Transmitter
UDP
User Datagram Protocol
UHCI
Universal Host Controller Interface
UTC
Universal time coordinare
VID
Voltage Identification
VRD
Voltage Regulator Down
Word
16-bit quantity
ZIF
Zero Insertion Force
Revision 1.0
83
Intel order number – D36978-004
Reference Documents
Intel® Server Board S5000VSA TPS
Reference Documents
See the following documents for additional information:
ƒ
TBD
Revision 1.0
84
Intel order number – D36978-004
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising