CNA1000 Network Adapter - Siemens

CNA1000 Network Adapter - Siemens
www.siemens.com.au\rail-components
Controlguide CNA2000 Network Adapter
Communications and Message Gateway
Communications Adapter
Seamlessly interconnect Siemens interlockings
or control systems with other supplier’s
systems.
Supports field and office functions and
point‑to‑point or point‑to‑multipoint
configurations.
Connectivity
Interface serial and Internet Protocol over
Ethernet communications.
Easy configuration
Benefits
Interfaces Siemens and third‑party signalling and
Pre‑programmed or user configurable with
easy‑to‑use configuration utility.
control systems
Interfaces serial and packet‑switched communications
Provides IP access to remote field equipment
Communicates over public and private networks
Supports ATCS addressing
Other custom protocols can be supported
Datasheet 10B-30
Datasheet 10B-30 issue 3.0
Description
Maintain and extend your railway
control network in a changing
equipment environment.
Mix and match interlocking and
Control Centre equipment from
different suppliers. The CNA2000
converts between office and field
protocols and between serial and IP
data.
CNA2000 is user configurable to
convert between most standard rail
protocols. Additional protocols can be
added.
Key Features
• 10/100 auto-sensing
Ethernet LAN and WAN support
• Five high-speed serial
communications ports
Specifications
Network Interface
Ethernet Port:
10/100BaseT auto‑sensing
IP Addressing
DHCP or fixed IP address
Serial Interfaces
Asynchronous ports:
Maximum asynchronous data rate:
Synchronous ports:
Maximum synchronous data rate:
3 RJ45 sockets
115.2 kb/s
2 DB25 female connectors
230.4 kb/s
RTS/CTS Hardware Flow Control
Digital Interfaces
Inputs:
2, optically isolated
Outputs:
2, optically isolated
Electrical
Power:
9-36 Vdc, 4W typical
Isolation:
200 Vrms minimum
Communications Protocols
Serial:
WSA S2, Genisys, MCS1, HP‑1, Datatrain, SCS128,
etc
Network:
WSA S2, Genisys, ATCS, ARES, GTC
Physical or Environmental
• Software selectable multi-protocol
serial transceivers
Operating Temperature:
-40°C to +70°C
Humidity:
5% to 90% non-condensing
• RS232, RS449, EIA530, EIA530-A,
V.35, V.36, X.21
Dimensions:
169.8 x 53.5 x 80.5 mm
Weight:
1.0 kg
Ordering
Part number CNA2000
Shelf or DIN rail mounting
Metal case packaging for shelf or DIN rail mounting
Chassis ground provided (internal jumper selectable)
Please discuss your requirements with
our sales staff.
Siemens Rail Automation Pty Ltd
ABN 78 800 102 483
Level 7, 380 Docklands Drive, Docklands,
Victoria 3008, Australia
T +61 3 1300 724 518
E rail-components.au@siemens.com
W www.siemens.com.au\rail-components
©2014, Siemens Rail Automation Pty Ltd
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising