1 System Setup 2 Specifications - Ring-NET

1 System Setup 2 Specifications - Ring-NET
Draco Extender K474 series
Draco Extender K474 series

USB cable (1.8 m, USB type A to type B)
1 System Setup
First time users are recommended to setup the system with the CPU
Unit and the CON Unit in the same room as a test setup. This will
allow you to identify and solve any cabling problems, and experiment
with your system more conveniently.
1.
2.2
Basic module VGA (replaces DVI-D video cable):

VGA cable (1.8 m, VGA male to DVI-I male)

IR remote control
2.
Connect your monitor(s), keyboard and mouse to the CON
Unit.
Upgrade module analog audio / serial:
3.
Connect the CON Unit with the interconnect cable(s).

Serial cable (1.8 m, RS232, male to female)
4.
Connect the 5VDC power supply to the CON Unit.

Stereo jack cable (1,6 m, 3,5 mm, male to male)
CPU Unit Installation
6.
System overview
Switch off all devices
CON Unit installation
5.
Draco Extender K474 series
Connect the source (computer, CPU) with the supplied
cables to the CPU Unit. Please ensure the cables are not
strained.
Connect the CPU Unit to the interconnect cable(s).
7.
Connect the 5VDC power supply to the CPU Unit.
8.
Power the system.
To power up the system, the following sequence is recommended:
Upgrade module digital audio:

Source (computer, CPU)
2.
CPU Unit
3.
Interconnect cable
4.
CON Unit
5.
Console (monitor, keyboard, mouse)
RCA cable (2.5 m, Cinch, male to male)
2.3

TOSLINK cable (1.8 m, F05, male to male)
Monitor – CON Unit – CPU Unit – source.
2 Specifications
1.
Upgrade modul USB-HID and USB 2.0 module:

USB cable (1.8 m, USB type A to type B)
Download of DDC Information
By default, data from the internal DDC list is reported to the source
(computer, CPU). If these settings do not lead to a satisfying result,
the DDC information of the console monitor can be downloaded and
stored internally. The devices have to be configured accordingly.
On all KVM Extenders with USB-HID support, the user can load the
DDC information of the console monitor via keyboard command under
operating conditions
1. Enter Command Mode (Default: 2x <Left Shift>).
2.1
Package Contents
You should receive the following items in your extender package:
If anything is missing, contact your dealer.
The screen goes black for a short time.
Basic module:

KVM Extender pair (CPU Unit and CON Unit)

2x 5VDC international power supply unit (without redundancy)

2x country specific power cord

Quick Setup

DVI video cable (1.8 m, DVI-D, male to male)
Manual download:
http://www.ihse.de/fileadmin/redakteur/pdf/manuals/m474_vario.pdf
2. Press the key <a> to download the DDC information of the console
At the same time Command Mode is closed and the keyboard
LEDs return to previous status.
The video mode has been readjusted. Screen quality should be
optimal. The CPU should now show the console monitor as the
current screen, together with the available video resolutions.
Manual download:
http://www.ihse.de/fileadmin/redakteur/pdf/manuals/m474_vario.pdf
Manual download:
http://www.ihse.de/fileadmin/redakteur/pdf/manuals/m474_vario.pdf
Draco Extender K474 series
3
Draco Extender K474 series
Draco Extender K474 series
Technical Support
Prior to contacting support please ensure you have read the quick
setup an manual, and then installed and setup your KVM extender cable as recommended.
3.1
Draco
KVM Extender
Support Checklist
To efficiently handle your request it is necessary to complete our
checklist for support and problem cases
(www.ihse.de/support/checklist_en.pdf). Keep the following information available before you call:
3.2

Company, name, phone number and email

Type and serial number of the device (see bottom of device)

Date and number of sales receipt, name of dealer if necessary

Issue date of the existing manual

Nature, circumstances and duration of the problem

Involved components (such as graphic source/CPU, OS,
graphic card, monitor, USB-HID/USB 2.0 devices, interconnect cable) including manufacturer and model number

Results from any testing you have done
K474 Series
Quick Setup
Shipping Checklist
1.
To return your device, contact your dealer to obtain a RMA
number (Return-Material-Authorization).
2.
Package your devices carefully, preferably using the original
box. Add all pieces which you received originally.
3.
Note your RMA number visibly on your shipment.
Devices that are sent in without a RMA number cannot be accepted.
The shipment will be sent back without being opened, postage unpaid.
Pos : 57 /806-IHSE/Z ertifi kate/U EB_Z ertifi kate @ 5\mod_1278579534933_258.doc @ 42666 @ 1
Manual download:
http://www.ihse.de/fileadmin/redakteur/pdf/manuals/m474_vario.pdf
Manual download:
http://www.ihse.de/fileadmin/redakteur/pdf/manuals/m474_vario.pdf
Manual download:
http://www.ihse.de/fileadmin/redakteur/pdf/manuals/m474_vario.pdf
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising