NETNode2x2W-5R
August 2016
NETNode2x2W-5R
NETNode IP Mesh Radio Phase 5 (Robust)
Overview:
Phase 5 is the latest generation of DTC's NETNode IP Mesh
radio family offering built-in dual HD video encoders and
MIMO capability for our highest ever data capacities.
NETNode IP radios can be combined in a fluid self-forming,
self-heading Mesh network containing up to 16 nodes. The
radios exchange bidirectional IP data in a single RF channel,
simplifying frequency management. The entire Mesh can
operate in a bandwidth between 2.5 and 10MHz and employs
DTC's unique COFDM modulation scheme offering excellent
RF penetration and performance in the presence of multipath.
Multiple Input Multiple Output (MIMO) technology transmits
two signals in the same channel almost doubling the
available data capacity.
The Robust variant is ideal for extended outdoor deployment
in harsh environments and features Power over Ethernet (PoE)
for increased flexibility and ease of installation.
Product information:
Features and Benefits:
Product Includes:
AP008896
Ideal for use for wide area coverage & multi-hop, mobile
applications such as robotics
Ubiquiti PoE Power Adapter POE-50-60W 50V 1.2A (airFiber) (incl. EU Cloverlead Power
Cable)
AP008898
Low latency IP communcation
Cat6 Ethernet Cable Assembly, 2m Straight
Through (2 off)
AP008899
Amphenol RJ45 Plug Connector Gland CAT6,
Black Zinc (2 off)
AP004625
UK Cloverleaf Power Cable - fitted with 5Amp
fuse
AP004627
US Cloverleaf Power Cable
Self-forming, self-healing mesh architecture
Dual HD video encoders
Data capacity of 32Mb/s of IP data possible
Mission Commander compatible
Software configurable RF bandwidth between 2.5MHz and
10MHz
Accessory Options (sold
separately):
IP back haul / central receive systems
AP006819
S band 3G Cavity Filter
Interlink mode for enhanced capabiliy and large scale
systems
CA3146
Phase 5 Rugged 12V power cable 5m CGMSS
type
CA3163
Phase 5 Rugged 48V power cable 5m CGMSS
type
64Gb of on-board storage with store & forward functionality
Built in encryption (DES as standard, AES128/256 available
subject to Export Control)
Domo – Video, IP and Sensors
August 2016
NETNode2x2W-5R
NETNode IP Mesh Radio Phase 5 (Robust)
Technical specification
Interfaces
Streaming
RF Interfaces
N-Types (2x TX/RX, 2x RX)
12-18V DC Input
Amphenol 38999 Series 3 (6 way)
18-48V DC Input
Amphenol 38999 Series 3 (3 way)
Ethernet 1
RJ45 Amphenol RJ Field Cat 6 Series
Ethernet 2
RJ45 Amphenol RJ Field Cat 6 Series
SDI/HD-SDI input 1
BNC (female 75Ω)
SDI/HD-SDI input 2
BNC (female 75Ω)
Config & Data
Amphenol 38999 Series 3 (22 way)
Format
UDP Multicast/Unicast
RTSP/RTP/UDP Multicast/Unicast
ONVIF profile S
MJPEG
TCP/HTTP
Video
Video Input
2 video streams
Max total throughput of 1920x1080p30
2 HD inputs at half resolution or frame rate
Input Format
1920x1080i 60/59.94/50Hz
1920x1080p 30/29.97/25/24/23.97Hz
1920x1080psf 30/29.97/25/24/23.97Hz
1280x720p 60/59.94/50Hz
720x576i 50Hz or 720x480i 59.94Hz
H.264 Compression
AVC / H.264 / MPEG-4 Part 10
High profile level 4.0
Coding Options
Horizontal scaling of 3/4, 2/3, 1/2, 1/4
Vertical scaling of 1/2, 1/4
Sub-frame rate of 1/2, 1/4, 1/8, 1/24
Encoder Delay
1s to 10ms (mode dependant)
Encoder Bitrates
0.25Mbps to 32Mbps
Typical range
NLOS Light Urban
800-1400m typ.
LOS (e.g. ground to air)
50km+
RF Interfaces
Antenna A
Channel 1 receive only
Antenna B
Channel 1 switched transmit / receive
Antenna C
Channel 2 receive only
Antenna D
Channel 2 switched transmit / receive
Audio
RF and modulation
Output frequency
Frequency variant dependant
Tuning step size
125kHz step
Output power
+33dBm per channel in 0.25dB step (4W
total)
Analogue Audio Input
High gain microphone stereo pair
Digital Audio Input
SD/HD-SDI 2 digital stereo pairs
Sample Rate
16kHz-48kHz
Coding Modes
4 channels stereo or mono
MPEG Audio Layer 1 64-448kbps
MPEG Audio Layer 2 32-384kbps
MPEG Audio Layer 3 8-256kbps
Bandwidth
2.5, 3.0, 3.5, 5.0, 6.0, 7.0, 8.0, 10.0MHz
Mesh capacity
Up to 25Mb/s (MIMO)
Modulation
COFDM 360 carrier modulation
Carrier Modulation
BPSK/QPSK/16QAM (adaptive)
Store and Forward options
FEC rate
FEC1/2, FEC2/3 (adaptive)
Storage format
Receive diversity
Maximum Ratio Combining
SD card interface (Secure Digital card)
64Gb SD card built in
Receive sensitivity
-98dBm (BW 2.5MHz / BPSK ½)
Record options
Continuous or triggered (Milestone)
Files download
From web browser interface/RTSP
Video and audio clip size
30 seconds
IP interface
Primary and secondary
ethernet electrical
100Base-T Ethernet (with optional POE)
Encryption
IP address allocation
DHCP dynamic IP addressing/Static IP
Type
AES128 or AES256 (both optional)
Open Audio comms channel (shared
voice channel)
Multi-user audio
Domo – Video, IP and Sensors
comms channel
Interface microphone level/headphone o/p
Compression
G726 32kbit audio 8KHz sampling and mute
August 2016
NETNode2x2W-5R
NETNode IP Mesh Radio Phase 5 (Robust)
Technical specification (con’t):
GPS
Dedicated GPS interface
Physical
RS232/RS485
Sealing
IP66 Minimum
Dimensions
H 125mm, W 125mm, D 205 (245) mm
(including connectors)
Mounting options base unit
Tripod mount and captive hole screws
Weight
3.46kg
Data interface
RS232/RS485 data input
(shared with user camera control)
1K2 to 115K2 baud switchable
With UDP and TCP routing protocol
PTZ camera interface (with AVI
fitted)
Power
User camera type
PAL or NTSC
User camera control
From Mesh Commander PC application using
VISCA, PELCOD or PELCOP
From any user supplied desk controller,
Requires RS232/RS485 interface
Triggers*
Trigger source
Trigger action
DC input (12V)
10-18V
DC input (48V)
20 – 52V
PoE x 2
50V(nominal) adapter dependant.
Power consumed (non-MIMO)
12W approx.
Power consumed (MIMO)
25W (40W pk) approx.
Environment
Third party equipment remote trigger (e.g.
PIR etc.)
User pre-set time trigger
Video motion detection*
Audio level*
Start to transmit (silence mode)
Activate video stream
Activate audio stream
Move camera to pre-set position
Activate local store feature
Temperature range
-10 to 50 °C
Frequencies
120170
1.20 - 1.70 GHz
200250
2.00 - 2.50 GHz
440500
4.40-5.00 GHz
Software License Code Includes
Control
Local control
LEDs power and mesh status
Remote control
Mission Commander PC application
Full control of all parameters in a map based
application
Web Browser control
Silver (included)
Standard Mesh, MIMO Mesh, DES Encryption,
Recording and Streaming
Gold
Silver plus SD H.264 Encoder
Platinum
Gold plus HD H.264 Encoder
*Future development
Export of encrypted products is subject to United Kingdom regulatory export controls.
For further information contact your Sales Account Manager, one of our Regional Sales Offices, or email solent.enquiries@domotactical.com
DTC – Solent
Fusion 2, 1100 Parkway
Solent Business Park
Whiteley, Hampshire
PO15 7AB, UK
T: +44 (0) 1489 566 750
DTC – Randers
DTC – Singapore
DTC – Brazil
3845 Gateway Centre Boulevard
Suite 360
Pinellas Park, FL
33782, USA
Haraldsvej 64B
DK-8960
Randers SØ
Denmark
21 Media Circle
Infinite Studios #06-04
Singapore
138562
T: +1 727 471 6900
T: +45 8791 8100
T: +65 6643 4700
Alameda Araguaia 2
190 – Ed. CEA II – suite 1109
Alphaville - Barueri
São Paulo, Brazil
06455-000
T: +55 11 2321 5055
DTC – Tampa (Head Office)
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd. This document and the information contained herein
is provided for evaluation purposes only and is subject to change without notice. Domo Tactical Communications (DTC) Ltd assumes no responsibility for errors
that might appear in this document and gives no representations or warranties as to the accuracy of the information contained herein, including but not limited
to the suitability and performances of the product or its intended application.
© Copyright Domo Tactical Communications (DTC) Limited 2016. All Rights Reserved.
1216
domotactical.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising