D150Q
mSATA D150Q
Features
•
•
•
•
•
•
Hardware write protect
Support static wear leveling algorithm
S.M.A.R.T. & i-S.M.A.R.T. Supported
Intelligent system for error recovery
Excellent data transfer speed
Compliant with JEDEC MO-300
SATA-IO mini SATA
R:130MB/s
W:120MB/s
SATA II
3Gb/s
Thermal
sensor
S.M.A.R.T
ECC &
Wear leveling
Write
protect
Specifications
Mechanicals
Connector
Type
miniPCIe Pin Define for SATA Signal,
23:TX+; 25:TX-; 31:RX-; 33:RX+
Dimension
(W x L x H)
29.85mm x 50.8mm x 3.5mm
Flash Type
SLC (Single Level Cell)
Weight
8g±2g
Density
2GB, 4GB, 8GB, 16GB, 32GB, 64GB
SATA II, SATA I, PIO 0~4,
MDMA 0~2, UDMA 0~6
Read:130 MB/sec (max.)
Write:120 MB/sec (max.)
Vibration
7 Hz to 2K Hz, 3 axes
Shock
Duration: 0.5ms, 1500G, 3 axes
Transfer Mode
Sustained R/W
Performance
Environmental
DC Input
Power
consumption
(Max.)
Operating
Temperature
Storage
Temperature
Humidity
Flash
Endurance
+3.3V DC ± 5%
Read: 180 mA
Write: 200 mA
Idle: 110 mA
00C~+700C (Standard Grade)
-400C~+850C (Industrial Grade)
Health monitoring Tool
S.M.A.R.T.
Supported
i-S.M.A.R.T.
Supported (Utility for Windows, Linux)
Ordering Information
Capacity
Standard Grade
Industrial Grade
-550C~+950C
2GB
DRPS-02GJ30AC3DB
DRPS-02GJ30AW3DB
Relative Humidity: 10-95%,
non-condensing
4GB
DRPS-04GJ30AC3QB
DRPS-04GJ30AW3QB
8GB
DRPS-08GJ30AC3QB
DRPS-08GJ30AW3QB
100,000 program/erase cycles
16GB
DRPS-16GJ30AC3QB
DRPS-16GJ30AW3QB
32GB
DRPS-32GJ30AC3QB
DRPS-32GJ30AW3QB
64GB
DRPS-64GJ30AC3QB
DRPS-64GJ30AW3QB
MTBF
> 3,000,000 hours
Certification
CE, FCC, RoHS
Warranty
5 years
Headquarter (Taiwan) : HTTP://WWW.INNODISK.COM E-MAIL:SALES@INNODISK.COM
TEL: +886-2-26963000 ADD: 9F., No.100, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City, Taiwan(R.O.C.)
USA Office: usasales@innodisk.com / Europe: eusales@innodisk.com / Japan: jpsales@innodisk.com / China: sales_cn@innodisk.com
Mechanical Dimension
Tolerance ± 0.2mm
The pin assignment, component keep out area of InnoDisk mSATA D150Q is followed by JEDEC
MO300 Specification.
PCIe and SATA Signal Switch MB Reference Circuit Design
We suggested MB can be designed a “signal bus switch IC” to transfer the differential channels. Due to
the bi-directional nature of bus switch IC, it can be used to allocate bandwidth between PCI express
and SATA II signal. You can increase one more option for your Mini PCIe device.
Headquarter (Taiwan) : HTTP://WWW.INNODISK.COM E-MAIL:SALES@INNODISK.COM
TEL: +886-2-26963000 ADD: 9F., No.100, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City, Taiwan(R.O.C.)
USA Office: usasales@innodisk.com / Europe: eusales@innodisk.com / Japan: jpsales@innodisk.com / China: sales_cn@innodisk.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising