DVD-7402,_english
DVD-7402
Random
To connect to the Scart jack
9
14
DVD OSD
14
Direction
14
Mute
14
Program
15
PBC
15
Return
15
Goto
15
Zoom
15
Digest
16
Angle
16
Title
16
SUB-T
16
LANG/R/L
16
3D
16
FUNCTIONAL MENU OPERATION
13
REV
14
Forward
14
Slow
14
Basic operation
17
System setup
17
Language setup
18
Audio setup
19
Video setup
19
Digital setup
20
For MP3/Picture CD
21
Trouble shooting guide
22-23
Technical specification
24
1.To connect to a TV set/5.1 channel/Optical or coaxial jack (AV output)
The standard packing of this unit contains a set of Audio/Video cable.
To connect to a TV set
Connect the VIDEO OUT jack of this unit to the VIDEO IN jack of the TV set (yellow jack)
by using the video cable.
To connect to coaxial jack
Connect the digital output jack (Coaxial jack) to the AC-3/DTS decoder by using the
power cable.
Press the SETUP key on the remote controller to enter into the AUDIO SETUP menu,
then select the AUDIO OUT item, press the
to select the SPDIF/RAW or the SPDIF/
PCM item, press the ENTER key on the remote controller to confirm your operation.
Select the EXIT SETUP item to exit from the SYSTEM SETUP menu.
NOTE:
1. When connecting with the coaxial output jack of this unit, please refer to the operation
instruction of the amplifier.
2.To adjust the different system (PAL/AUTO/NTSC) accordingly when playing
back disc with different system.
2.To connect to a TV set by using the scart cable.
a.Connect the SCART OUT jack of this unit to the SCART IN jack
of the TV set.
b.Connect the ML and MR jack of this unit to the audio in jack of
the TV set by using the red/white A/V cables.
c.Press the SETUP key on the remote controller to enter into the
SYSTEM SETUP menu, then select the VIDEO item, press the
to select the RGB item, press the ENTER key on the remote
controller to confirm your operation.
d.Select the EXIT SETUP item to exit from the SYSTEM SETUP
menu.
SCART OUT
9
3.To connect to the S-VIDEO and in jack.
Connect the S-VIDEO out jack of this unit to the S-VIDEO in jack of the TV set.
Connect the L and R jack of this unit to the audio in jack of the TV set by
using the red/white A/V cables.
Press the VIDEO key on the remote controller to adjust the video output
mode to be S-VIDEO.
CAUTIONS:
1.Only when the TV set has the above video output mode, you can make the above
connections.
2.S-VIDEO cable is a selection for you, but it is not contained in the standard packing
of this unit.
3.Please refer to the operating instruction of the TV set and adjust the video output
modes of the unit accordingly.
SCART OUT
10
FRONT PANEL DVD-7402
7 8
1
2
3
1.POWER ON/OFF
2.CABIN DOOR
3.OPEN/CLOSE CABIN DOOR
4.LEFT/RIGHT SOUND CHANNEL
6
4 5 6
5.PLAY/PAUSE
6.STOP
7.SKIP TO THE PREVIOUS TRACK
8.SKIP TO THE NEXT TRACK
5
1
2
3
4
1.MASTER LEFT/RIGHT AUDIO OUTPUT
2.COAXIAL OUTPUT
3.S-VIDEO OUTPUT
11
4.SCART INPUT JACK
5.COMPOSITE VIDEO OUTPUT
6.POWER IN
1. STANDBY
2. VIDEO
3. MARK
4. PROG
5. CLEAR
Standby function
Video output mode shifting function
Bookmark/memory playback function
VCD program function
Cancel the programmed track or the
bookmark point
Setup the playback time
6. GOTO
Subtitle shifting function
7. SUB-T
Angle shifting function
8. ANGLE
Language/sound channel shifting
9. LANG/R/L
function
Setup menu function
10. SETUP
Resame to default setup
11. DEFAULT
Fast backward function
12.
Fast forward function
13.
Picture digest function
14. DIGEST
On screen display function.
15. OSD
Repeat from A-B
16. A-B
Repeat playback function.
17. REPEAT
3D surround sound effect
18. 3D
Sound mute function
19. MUTE
Open/close tray function
20.
Number key
21. 0-10+
Title menu
22. TITLE
Menu display/PBC on/off
23. MENU/PBC
Direction key
24.
Operation confirmation function.
25. ENTER
Image zooming function.
26. ZOOM
27. PLAY/PAUSE Play/pause function
Skip to the previous track.
28.
Skip to the next track.
29.
30. STOP/RETURN Stop/resume playback function
Random playback function
31. RANDOM
NTSC/PAL shifting function
32. N/P
Playback in slow speed
33. SLOW
Step forward function
34. STEP
Volume rise up function
35. VOL+
Volume low down function
36. VOL-
12
13
2X
RANDOM
4X
8X
20X
Press the RANDOM key the first time, the unit will enter
into random playback status, press the RANDOM key the
second time to resume to the normal playback status.
Press the OSD key the first time, the screen will show
(For DVD discs):
TITLE ELAPSED
DVD
TT01/08 CH
Press the OSD key the second time, the screen will show:
TITLE REMAIN
DVD
OSD
DVD
TT01/08 CH
Press the OSD key the third time, the screen will show:
CHAPTER ELAPSED
DVD
TT01/08 CH
Press the OSD key the forth time, the screen will show:
CHAPTER REMAIN
DVD
TT01/08 CH
Press the OSD key the fifth time, the OSD function will be
cancelled.
DIRECTION
MUTE
1.Upwards, downwards, leftwards, rightwards moving key.
2.Press the DIRECTION key to select the item desired or
the zooming part of the picture.
3.When playing back Picture-CD discs, press the direction
key to move on the picture.
4.In the Karaoke function on status, press the left/right
direction key to rise up the ECHO volume.
Press the MUTE key the first time, the disc is still playing
back but the sound is mute. Press the MUTE key the second
time, the unit will resume to the normal playback status.
14
Programming playback setup (For DVD discs).
Programming the disc content as you desired, the unit will
play back the disc in your programmed order.
PROG
Press the PROG key on the remote controller, the screen
will show the PROGRAM MENU.
Press the number key to select your desired track.
The left side on the PROGRAM MENU is the titles of the
track, the right side is the corresponding songs, you can
select your desired songs by press the number key, and
then press the direction key to start the pla yback function.
RETURN
When the playback VCD disc version is above VCD2.0
and the unit is in the PBC ON status, press the RETURN
key to turn back to the disc menu, when playing back DVD
disc, press the RETURN key to turn back to the MAIN MENU.
Time setup playback function (For DVD discs):
There are 3 kinds of selection for you:
1.Select the playback time of the title to start the playback.
DVD
GOTO
ZOOM
TT01/08 CH
2.Select the playback time of the chapter to start the playback.
3.Press the number key to select the track directly.
Cautions: The setup time you enter can not exceed the
total playback time of the disc.
When the playback time of the DVD discs can not be set up,
it is because the format of the DVD discs does not have this
function.
Press the ZOOM key to zoom in or zoom out the image.
When the unit is in the playback status, press the ZOOM
key to zoom in or zoom out the image by 4 times, in the
image zooming in status, press the direction key to move
on the picture.
15
DIGEST
When playing back the VCD discs, press the DIGEST key to
enter into the 9 picture viewing function. Press the PREV. or
the NEXT key to select the 9 pictures of the next page. You
can resume to the normal playback status by pressing the
ENTER key or the
key.
TITLE
When playing back DVD discs, press the TITLE key to return
to the TITLE MENU of the disc, press the direction key or the
number key to select the contents, then press the ENTER key
for confirmation, the unit will start playback from the content
you selected.
SUB-T
Subtitle on/off function.
When playing back VCD disc, press the LANG/R/L key to
LANG/R/L shift the mode of the sound channel.
3D
The 3D function has 4 kinds of sound effect: SRND, EQ,
BAND, KEY
There are 5 kinds of surround sound effect for selection:
CONCERT, CHURCH, PASSIVE, WIDE, LIVE
There are 6 kinds of EQ sound effect for selection:
STANDARD, CLASSIC, ROCK, JAZZ, POP, USER
NOTE: When playing back DVD disc or Picture-CD, this
function is ineffective.
16
c.VIDEO SETUP
Press the SETUP key to enter into the
SETUP MENU, press the Left/right
direction key to select the contents of
the main menu, press the up/down
direction key to select the contents of
the submenu, press the ENTER key
for confirmation.
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1.SYSTEM SETUP
RGB When you connect the TV set with
the unit by using the scart cable, please
select the RGB item.
S-VIDEO
When you connect the TV set
with this unit by using the S-VIDEO cable,
select the S-VIDEO item.
Under the main menu status, select the
SYSTEM SETUP item to enter into
SYSTEM SETUP page.
a.TV SYSTEM
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
d.TV TYPE
NTSC
PAL 60
PAL
AUTO
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
If your TV set has multi-system selection,
select the AUTO item.
If your TV set is PAL system, select the
PAL item.
If your TV set is PAL60 system, select the
PAL60 item.
If your TV set is NTSC system, select the
NTSC item.
4 3PS
4 3LB
16 9
You can select the display mode to be 4:3
PS , 4:3LB or 16:9 according to your TV
screen aspect ratio.
e.PASSWORD
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
Note: The default setup of this unit is
PAL system.
b.SCREEN SAVER
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
RGB
S-VIDEO
The default setup of this unit is password
lock up.
In the password lock up status, you can
not setup the rating of the disc or change
the password. If you need to setup the
rating, enter the default password 0000,
then press the ENTER key for confirmation.
If you want to change the password, you
also need to enter the old password first.
ON
OFF
In the status of STOP/OPEN TRAY DOOR
/NO DISC, this unit will start the screen
protection function automatically after
three minutes. When the screen saver
function is ON, the screen will be in black,
only the DVD icon is moving on the screen.
ON Screen protection function on.
OFF Screen protection function off.
17
f.RATING
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
LANGUAGE SET UP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
NO ADULT
KID SAFE
VIEW ALL
If your disc has the parental control function,
you can setup the parental control function
by using the password.
The parental control rating level can setup to
be NO ADULT or KID SAFE level.
When you select the VIEW ALL item, then the
lock up function will be cancelled.
Only in the status of password lock up function
on, you can setup the RATING function.
g.DEFUALT
SYSTEM SETUP
TV SYSTEM
SCREEN SAVER
VIDEO
TV TYPE
PASSWORD
RATING
DEFAULT
EXIT SETUP
When selecting the RESTORE item, the
unit will resume to the default setup status.
c.SUBTITLE LANGUAGE
LANGUAGE SET UP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
PORTUGUESE
GERMAN
OFF
Press the direction key to select the
SUBTITLE LANGUAGE you desired, then
press the ENTER key for confirmation.
There are 7 kinds of language for selection:
Chinese, English, Japan, French, Spanish,
Portuguese and German.
d.MENU LANGUAGE
2.LANGUAGE SETUP
LANGUAGE SET UP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
a.OSD LANGUAGE
LANGUAGE SET UP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
Press the direction key to select the
AUDIO LANGUAGE you desired, then
press the ENTER key for confirmation.
There are 8 kinds of language for
selection: Chinese, English, Japan,
French, Spanish, Portuguese, Latin and
German.
EXIT SETUP
RESTORE
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
PORTUGUESE
LATIN
GERMAN
ENGLISH
SPANISH
EXIT SETUP
EXIT SETUP
Press the direction key to select the on
screen display language you desired,
then press the ENTER key for confirmation.
This unit has four kinds of OSD languages
for selection: English, German, Portuguese
and Swedish.
b.AUDIO LANGUAGE
18
CHINESE
ENGLISH
JAPAN
FRENCH
SPANISH
PORTUGUESE
GERMAN
LATIN
Press the direction key to select the MENU
LANGUAGE you desired, then press the
ENTER key for confirmation.
There are 8 kinds of language for selection:
Chinese, English, Japan, French, Spanish,
Portuguese, German and Latin.
NOTE: The AUDIO/SUBTITLE/MENU
language selection is subject to the playback
disc, only when the disc supports THE
AUDIO/SUBTITLE/MENU language selection
function, this function will be effective.
b.CONTRAST
3.AUDIO SETUP
a.AUDIO OUT
AUDIO SETUP
AUDIO OUT
MIC. SETUP
ECHO
MIC. VOL
KEY
PROLOGIC
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
EXIT SETUP
Press the direction key to move the slider
to adjust the contrast of the video output.
EXIT SETUP
Press the direction key to select the AUDIO
OUT item, then press the ENTER key for
confirmation, the submenu has 3 kinds of
mode for selection: SPDIF/OFF, SPDIF/RAW
.
and SPDIF/PCM.
SPDIF/OFF Coaxial or optical out function off.
SPDIF/RAW When this unit connects with
the 5.1 channel amplifier by using the coaxial
or optical cable, select the SPDIF/RAW item.
When the playback disc adopts the format of
DOLBY or MPEG, the coaxial or optical output
signal of this unit will be the RAW format
.
of DOLBY or MPEG accordingly.
NOTE: The connected amplifier should have
the DOLBY and MPEG decoding modes.
SPDIF/PCM When the unit connects with the
digital stereo amplifier, please select this item.
When the playback disc has the DOLBY or
MPEG mode, the coaxial or optical output
.
signal will be PCM format.
e.HUE
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
Press the direction key to move the slider
to adjust the hue of the video output.
f.SATURATION
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
Press the direction key to move the slider
to adjust the saturation of the video output.
4.VIDEO SETUP
a.BRIGHTNESS
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
EXIT SETUP
Press the direction key to move the slider
to adjust the brightness of the video output.
19
6.DIGITAL SETUP
a.OP MODE
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL
LINE OUT
RF REMOD
EXIT SETUP
LINE OUT The unit will compress the input
signal to be linear audio output. By selecting
this item, the volume will be small.
.
RF REMOD
By selecting this item, the
volume will be large.
.
b.DYNAMIC RANGE
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL
EXIT SETUP
When selecting the LINE OUT item, select
this item to adjust the linear compression
ratio
NOTE: This function will be effect only in the
status of DOWNMIX function off.
c.DUAL MONO
DIGITAL SETUP
OP MODE
DYNAMIC RANGE
DUAL
EXIT SETUP
STEREO
MONO L
MONO R
MIX MONO
This item is to setup the audio left and
right output signal.
This item has 4 selections: STEREO,
MONO LEFT, MONO RIGHT
and MIX MONO.
This function is mainly for Karaoke
mode selection.
20
FOR MP3/JPEG DISC
Put the MP3/JPEG disc into the disc tray, the unit will load the contents of the disc auto
matically, then enter into the first file of disc and playback the first song or picture.
Name of the current
playback file.
Name of the current playback
Mp3 song or Picture-CD.
Files zone: Display of
the contents of the MP3
or Picture-CD file.
The slider will move
down automatically
with the sequence
playback track.
Contents Zone:
Indicating the contents
of the disc.
Indicating that the
current playback file
is JPEG format
(Picture-CD)
Indicating that the
current playback file
is MP3 format.
To shift from one type of file to
another type when the playback
disc has different types of file.
By moving the direction key to select the file for playback.
By moving the direction key to select the song/picture for playback.
.
.
.
NOTE:
1.Press the left/right direction key to move the highlight in the Files zone or Contents
.
zone.
.
2.Press ENTER key to confirm your selection.
.
3.In the playback status, press the RETURN key to return to the disc menu.
4.Press the number key to select the track directly. For example, if you want to playback
the No.15 track, press +10 first, then press 5 , the unit will start to play back the No.15
.
track.
.
5.MP3 disc do not have the video output, only has digital audio output.
6.When playing back Picture-CD disc, you can press the direction key to move the picture.
When in the status of Picture-CD contents display, press the MENU/PBC key to enter into
the 6 picture digest viewing function, press the NEXT or PREV key can turn to another page,
you can also press the number key to select the picture you want to play back directly.
21
22
23
LEFT AND RIGHT AUDIO OUTPUT
COAXIAL OUTPUT
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising