For a better workbench environment!

For a better workbench environment!
FT/FE/FC-serieS FT12 / ft12-pf / fe4000 / fc800
HIGH VACUUM SYSTEMS
High vacuum filter units eliminates smoke and gas from hand soldering
processes.The filter units has a unique filter concept with a verified
function for gas and particle separation.
Fume extraction equipment improves the working environment and
protects the operators´health.
The high vacuum filter units can be used in different applications, such
as gluing and soldering.
For a better workbench environment!
FT12
FT12-PF
FE4000
HIGH VACUUM SYSTEMS
Unique filter concept
The filter systems have a unique filter concept with a verified function for gas and particle separation.
Gases contain complex and dangerous molecule structures. In smoke, particles of different shapes and
sizes can be found. The filter systems are built to handle most hazardous substances in air pollution that is
generated by many different manufacturing processes.
Low sound level
To keep the workplace as comfortable as possible the noise level of surrounding machines shall be as quiet
as possible. The filter units have the lowest sound level on the market.
Extraction right at the source of pollution
The most efficient way to remove the pollution is to catch it right at the source. With the tube only 10 mm
away from the solder tip and a high air speed, the fumes immediately extracted and processed in the filter.
Mobile or central units
Filtronic offer both mobile and central units. The mobile units for smaller workplaces and for production
where you want to be able to change the production layout easier. Central units for bigger standardized
production.
ESD-safe
All fume extraction equipments are ESD-safe.
FC800
HIGH VACUUM SYSTEMS
FT12:
Filter unit with inlets for two soldering irons. High vacuum system driven by compressed
air.
FT12-PF:
Filter unit with inlets for two soldering irons. Integrated pre filter cassette for applications
with a large amount of particles. High vacuum system driven by compressed air.
FE4000:
Filter unit with inlets for two soldering irons. High vacuum system driven by an electrical
motor.
FC800:
Central unit with connection for up to 50 soldering irons. Five irons can be connected
directly to the unit. The filter system has a integrated pre filter for applications with a
large amount of particles.
Filter concept
Unique filter concept built in four steps:
Pre filter for dirt and dust
Micro filter (HEPA) for small particles
Gas filter for both high and low weight gas molecules
Dust filter
The filters are designed to achieve maximum
performance and are tested and documented by a
third party.
Our filter design with verified function makes the
filter systems unique on the market.
The main filter has an integrated particle filter
(HEPA) and gas- and dust filter for best function
and easy filter exchange. The pre filter protects
the main filter and is change separately for longer
filter lifetime.
HIGH VACUUM SYSTEMS
Technical data
FT12
FT12-PF
FE4000
FC800
50
Max connected soldering irons
2
2
2
Height, diameter (FC800 height, width, depth) cm (in)
20,12 (7,9;4,7)
24,5,12 (9,6;4,7)
29,14 (11,4;5,5) 45;69,5;45 (17,7;27,3;17,7)
Weight, kg (lb)
1,5 (3,3)
1,5 (3,3)
4,9 (10,8)
45 (99,2)
Sound level, dB(A), at 1 meter
37
37
40
51
Suction capacity, l/m
20-50
20-50
40
800
Max vacuum, Pa
5000
5000
3000
12000
Micro filter, separation degree %
>99,99
>99,99
>99,95
>99,97
Gas filter, separation degree %
>99
>99
>99 -
Mains voltage, V
-
-
230 V, 50-60 Hz
230 V, 50 Hz
Power consumption, W
-
-
70
630
2
2
2
2
Warranty, years (except for filters)
For a better workbench environment!
FILTRONIC AB
Box 2284, SE-531 02 Lidköping, Sweden
Tel: +46 510 208 10, Fax: +46 510 201 40
E-mail: office@filtronic.se
www.filtronic.se
FT/FE/FC Eng 2009-07
Filtronic AB is striving to create a better workbench environment by developing and producing particle and gas filter
systems of very high quality. The filter systems are easy to use and install, have a low noise level and a guaranteed
function. Read more about us and our products at www.filtronic.se.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising