Voyager Edge Series Quick Start Guide
Voyager Edge Series
Quick Start Guide
Mute button
Voice button
Play/Pause button
Call button
Volume button
Power button
Micro-USB charge port
Headset LED (indicator light)
Car charger*
Earloop
Charge case
Micro USB cable*
Small and large eartip
NOTE *Charger style may vary by product.
Registering Your Product and Plantronics Software
Visit plantronics.com/productregistration to register your product online so we can
provide you with the best service and technical support.
We also recommend that you install the Plantronics software located at plantronics.com/
software. With it installed you can:
• Customize your headset and USB adapter settings to your personal preferences
• Automatically manage your PC multimedia so you never miss a call
• Quickly access links to product support and software/firmware upgrade information
Charge case overview
IMPORTANT The charge case is placed in deep sleep mode after manufacturing to save power and
protect the battery. To wake-up the charge case, plug it into a power source for a minimum of 1
minute. The LED's flash when charging.
Charge case LEDs; indicates case/headset battery status
Headset: Touch the icon to display the headset battery status
Charge case: Touch the icon to display the charge case battery status
Micro USB charge port
When fully charged, the charge case provides an extra 10 hours of battery life for the headset.
Pair
NOTE If your phone supports Near Field Communication (NFC), go to NFC pairing.
Bluetooth pairing
1
2
Wearing your headset, power it on. You hear “welcome” in all the supported languages and then
"pairing" in the default language. The headset LED flashes red and blue.
Activate Bluetooth® on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On*
• Android™ Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
NFC pairing
3
Select “PLT_Edge.” If necessary, enter four zeros (0000) for the passcode or accept the
connection. Once successfully paired, you hear “pairing successful."
1
Ensure NFC is on and your phone’s display is unlocked.
2
Tap and hold the headset to the phone’s NFC tag location until NFC pairing completes. If
necessary, accept the connection.
TIP Keep an eye on your Smartphone's screen for prompts to start and accept the pairing process.
NOTE The headset’s NFC tag is located on the top of the headset. Phone NFC tag locations vary.
Pair Another Phone
After pairing your headset to your phone, you may want to pair another phone.
1
2
Power on your headset.
Choose:
• Tap the Voice button
and say “Pair mode”
• Press and hold the Call button
until you hear "pairing"
3
Activate Bluetooth on your phone and set it to search for new devices.
4
Select “PLT_Edge.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the headset indicator lights stop
flashing.
Select language
Once your headset is paired and connected to your phone, you can change the headset
language.
1
Wearing your headset, power it on.
2
Press and hold the Volume up + and down – buttons together until you hear “welcome." The
language selection directions repeat in every supported language.
3
Follow the voice-guided prompts to select the headset language.
Charge
It takes 90 minutes to fully charge the headset. The indicator light turns off once charging is
complete.
TIP To reset the accuracy of the talk time prompt, deplete the headset battery then charge fully.
Headset LED behavior while charging with micro USB cable
Off
Charging complete
Battery high
Battery medium
Battery low
Battery critical
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising