Product Data Sheet - EDGE Optical Solutions

Product Data Sheet - EDGE Optical Solutions
Release 1.10
Product Data Sheet
Key Highlights:
• Type: 40G Passive Twinax Cable
• Compatibility: Multi-Vendor MSA Compatible
• Media Type: Passive Copper Cable
• Max. Distance: 5 m
• Data Rate: 2.125-41.2 Gbps
• Temperature: Standard 0°-70°C
• Low Power Consumption: 0.02W (Typical)
40G Passive Twinax Cable: 40G-PDAC-QSFP
Product Description:
40G-PDAC-QSFP is Multi-Vendor MSA Compatible 40G Passive Twinax Cable, operating over passive copper cable. 40G Passive twinax cable
is equipped with MSA standard compatible QSFP+ transceiver assembly at each end of cable. As passive Twinax cables do not support any
electrical transmission signal boosting on regeneration, length of 40G Passive Twinax cable is limited up to 5 meters, which is enough to
support 40G connections within same or neighboring equipment racks. 40G Passive Twinax cable supports 4 separate fully duplex copper
data lanes, which support 2.125-41.2 Gbps multi-rate communication and such applications as 40G Ethernet (41.25Gbps) | 10G Ethernet
(10.31Gbps) |10G Fiber Channel (10.52 Gbps) | 8G Fiber Channel (8.5 Gbps) |4G Fiber Channel (4.25 Gbps) |2G Fiber Channel (2.125 Gbps) |4 x
InfiniBand QDR (32Gbps) |4x InfiniBand DDR (16Gbps) |4x InfiniBand SDR (8Gbps). Most popular applications of 40G Passive Twinax Cables
are cost effective close range interconnections within equipment room of telecom operators or data centers, interconnecting LAN or SAN
applications with speeds up to 40G.
40G Passive Twinax Cable is CE/RoHS certified and it is Compliant with product safety standards. 40G-PDAC-QSFP is fully compliant to
QSFP+ Multi Source Agreement SFF-8436. Consequently, it means that module is compatible with 80% of networking equipment, where
is not implemented a special algorithm for protection against third party modules. However – we can provide 40G Passive Twinax Cable
with custom-encoded firmware in order to make it work almost in any equipment and we can support encoding of each end to support
different vendor equipment, allowing using 40G Passive Twinax Cable as cross-platform interconnection medium. We will be glad to hear
Your requirements and our sales team will check all relevant details with You during ordering procedure. Our focus is providing top quality
service, we are performing serious quality checks before delivery of our products
EDGE Technologies Ltd.
Plienciema Street 33, Marupe
Latvia, LV-2167
sales@edgeoptic.com
www.edgeoptic.com
Release 1.10
Product Data Sheet
Product Specification:
Parameter
Value
Media Type:
Passive Twinax Cable
DAC Copper Type:
0.5m-4m AWG30 / 5m AWG26
Maximum Distance:
0.5m | 1m | 1.5m | 2m | 2.5m | 3m | 4m | 5m
Supported Data Rate:
2.125-41.2 Gbps
Supported Applications:
40G Ethernet (41.25Gbps) | 10G Ethernet (10.31Gbps) |10G Fiber
Channel (10.52 Gbps) | 8G Fiber Channel (8.5 Gbps) |4G Fiber Channel (4.25 Gbps) |2G Fiber Channel (2.125 Gbps) |4 x InfiniBand QDR
(32Gbps) | 4x InfiniBand DDR (16Gbps) |4x InfiniBand SDR (8Gbps)
DDM/DOM:
Supported
Connectors:
QSFP+
Temperature Range:
Standard 0°-70°C
Power:
+3.3V single power supply
Power Consumption:
0.02W (Typical)
MTBF value at 35 °C:
1’000’000 Hours.
Compliance:
QSFP+ MSA | IEEE 802.3ba | SFF-8436 | QDR InfiniBand | ROHS |
CE
Supported Versions:
PN
Description
40G-PDAC-QSFP-0.5
Multi-Vendor Compatible 40G QSFP to QSFP Twinax Passive Copper Cable (2.125-41.2
Gbps, Max. 0.5m, AWG 30, Temp. 0-70C)
40G-PDAC-QSFP-1
Multi-Vendor Compatible 40G QSFP to QSFP Twinax Passive Copper Cable (2.125-41.2
Gbps, Max. 1m, AWG 30, Temp. 0-70C)
40G-PDAC-QSFP-1.5
Multi-Vendor Compatible 40G QSFP to QSFP Twinax Passive Copper Cable (2.125-41.2
Gbps, Max. 1.5m, AWG 30, Temp. 0-70C)
40G-PDAC-QSFP-2
Multi-Vendor Compatible 40G QSFP to QSFP Twinax Passive Copper Cable (2.125-41.2
Gbps, Max. 2m, AWG 30, Temp. 0-70C)
40G-PDAC-QSFP-2.5
Multi-Vendor Compatible 40G QSFP to QSFP Twinax Passive Copper Cable (2.125-41.2
Gbps, Max. 2.5m, AWG 30, Temp. 0-70C)
40G-PDAC-QSFP-3
Multi-Vendor Compatible 40G QSFP to QSFP Twinax Passive Copper Cable (2.125-41.2
Gbps, Max. 3m, AWG 30, Temp. 0-70C)
40G-PDAC-QSFP-4
Multi-Vendor Compatible 40G QSFP to QSFP Twinax Passive Copper Cable (2.125-41.2
Gbps, Max. 4m, AWG 30, Temp. 0-70C)
40G-PDAC-QSFP-5
Multi-Vendor Compatible 40G QSFP to QSFP Twinax Passive Copper Cable (2.125-41.2
Gbps, Max. 5m, AWG 28, Temp. 0-70C)
EDGE Technologies Ltd.
Plienciema Street 33, Marupe
Latvia, LV-2167
sales@edgeoptic.com
www.edgeoptic.com
Release 1.10
Product Data Sheet
Compatibility:
EDGE Optical transceivers can be provided with custom-encoded firmware, in order to provide compatibility
with more then 50 vendor brands in data and telecom communications industry:
MS - General MSA
AD - ADVA
AL - Alcatel-Lucent
AR - Arista
AV - Avaya
BR - Brocade
CN - Ciena
CI - Cisco
DL - Dell & Force10
DK - D-Link
EM - EMC2
ET - Enterasys
ER - Ericsson
EX - Extreme Networks
F5 - F5 Networks
FO - Fortinet
FU - Fujitsu
H3 - H3C
HI - Hirschmann
HP* - HP Networking
HS* - HP Storage
HU - Huawei
IB - IBM
IF - Infinera
IN - Intel
JU - Juniper Networks
LI - Linksys
ML - Mellanox
ME - Meraki (Cisco)
MT - MikroTik
MO - Moxa
MR - MRV
NG - Netgear
NS - NSN
PA - Palo Alto Network
QL - Qlogic
RD - RAD
RU - Ruijie Networks
SM - Supermicro
SY - Synology
TC - Telco Systems
TP - TP-LINK
TN - Trendnet
WG - WatchGuard
ZT - ZTE
XX - Other
Warranty:
EDGE Optic’s provides a limited warranty for sixty (60) months from Purchaser’s receipt of the Equipment
represented in this data sheet against defective design or workmanship.
EDGE Technologies Ltd.
Plienciema Street 33, Marupe
Latvia, LV-2167
sales@edgeoptic.com
www.edgeoptic.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising