data sheet - Hatteland Display AS

data sheet - Hatteland Display AS
DATA SHEET
Manufacturer:
Hatteland Display AS
Product:
Compact Fanless Computer
Type:
HT B18 STD-Axxx (HWcode00 / HWcode90)
Last Revised:
Revision#:
17 Jun 2010
09
Compact Fanless Computer
Overview:
All HT B18 models features Heat Pipe Cooling Technology, Interchangeable
CPU, PCI/PCIe support and HDD-Free Solution with Solid State Disk (SSD)
which ensures fast data transfers to minimize boot time.
In addition it features aluminium chassis w/no apertures and comes
standard with MultiPower (AC and DC power input built in) ensuring
that they are compatible with all power systems on all vessels.
It will automatically switch to whatever power is connected, making
it highly flexible for shipbuilders and system integrators alike.
The HT B18 is fanless with no moving parts inside which will
prolong lifetime and reduce service costs.
FRONT VIEW
BACK VIEW
SIDE VIEW
TOP VIEW
Chassis Difference
HWcode00
HWcode90
* HWcode00 manufactured from March 2010.
* HWcode90 manufactured from June 2010. Shown on datasheet
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG file.
This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way.
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 5276 3700 - info@hatteland-display.com - www.hatteland-display.com
1/2
PRODUCT SPECIFICATIONS - HT B18 STD-Axxx
Note: All specifications are subject to change without prior notice!
TECHNICAL DESCRIPTION
External Connector Type:
Computer Specifications: (Standard model)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Processor
Memory
Graphics
Graphics Res.
System Chipset
IO Chipset
BIOS
PCI Slots
: 1 x Intel® Core™2 Duo Desktop Processor P8400 - 2.26GHz, Bus Speed 1066MHz, 3MB L2 Cache
: 2 x 1GB installed (Dual Channel 200-pin DDR2 800MHz SO-DIMM)
: Intel® Graphics Media Accelerator GMA 4500MHD Integrated/Daughter Board (CH7307C)
: Max 1600 x 1200 @ 60Hz
: Intel® GM45 / ICH9 support Intel® Active Management Technology
: Winbond W83627DHG
: AWARD BIOS
: 2 x PCI Rev2.3 Slot 32-bit, 3V and 5V Interface, Full Height & Half Length (Default Configuration)
Note: Please also review max power consumption in "Power Specifications" table below.
Ethernet #1
: 1 x 10/100/1000Mbps, ICH9M Intel® 82567L
Ethernet #2
: 1 x 10/100/1000Mbps, Intel® 82574L PCI-E Gigabit LAN Controller
Serial Ports
: 1 x RS-232 (COM1) + 1 x RS-232/RS-422/RS-485 (COM2)
USB Ports
: 4 x USB ports - Supports 2.0 & 1.1
Keyboard Port
: Standard PS/2 mini DIN connector
Mouse Port
: Standard PS/2 mini DIN connector
Audio
: ICH9M +
AC97 Codec ALC888, 7.1, RCA Jack (Front Out,Line In,Mic,Center/LFE,Surround,Surround back
Speaker
: No
Power Manager : ACPI
Watchdog Timer : Reset: 1 sec.~255 min. and 1 sec. or 1 min./step
H/W Status Mont. : Temperatures, voltages & cooling fan status. Auto throttling control if CPU overheats
2 x DVI-D or 1 x DB15F + 1 x DVI-D
1
1
2
4
1
1
x
x
x
x
x
x
RJ-45
RJ-45
DB9M
USB Type A
PS/2
PS/2
6 x JACKS
Power Specifications:
Power Supply Options:
• 115&230VAC - 50/60Hz + 24VDC
: Model HT B18 STD-Axxx (60W) (STD IEC + 1 x 2p D-SUB (male) - Amphenol FCC17)
• Power Consumption - Operating
• Power Consumption PCI/PCIe
: 30W
: Max Total Power Consumption (the sum of both slots) shall not exceed 15W.
Note: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the
AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input.
Available Models:
HT
1x
2x
1x
B18 STD-A100 with (Standard Chassis 2.26GHz 2GB RAM 30GB SDD):
Intel® Core™2 Duo Desktop Processor P8400 - 2.26GHz
1GB installed (Dual Channel DDR2 800/667MHz SO-DIMM 200-pin)
Replaceable SSD 30GB or more* 2.5" SATA
HT
1x
2x
1x
1x
HT
1x
2x
1x
1x
1x
B18 STD-A103 with (Standard Chassis 2.26GHz 2GB RAM 30GB SDD):
Intel® Core™2 Duo Desktop Processor P8400 - 2.26GHz
1GB installed (Dual Channel DDR2 800/667MHz SO-DIMM 200-pin)
Replaceable SSD 30GB or more* 2.5" SATA
MOXA Serial I/O Card (4 x COM ports - Supports RS-232/422/485)
Microsoft® Windows® Embedded Enterprise (XP Professional Eng w/SP2c, 32bit)
B18 STD-A101 with (Standard Chassis 2.26GHz 2GB RAM 30GB SDD):
Intel® Core™2 Duo Desktop Processor P8400 - 2.26GHz
1GB installed (Dual Channel DDR2 800/667MHz SO-DIMM 200-pin)
Replaceable SSD 30GB or more* 2.5" SATA
Microsoft® Windows® Embedded Enterprise (XP Professional Eng w/SP2c, 32bit)
* Size indicated is the lowest size available/approved for current revision of data sheet. The unit will support increased disk space in future. Please contact sales for up-to-date status.
Available Accessories:
Capabilities / Prepared for:
• HT 00244 OPT-A1 = Mounting Bracket, RAL 9011
• HT 00228 OPT-A1 = Mounting Bracket with cable relief, RAL 9011
• HT 00215 OPT-A1 = Extra recovery image (USB memory stick)
• HT 00237 OPT-A1 = Mounting bracket for PCI/PCIe cards
• MOXA Serial I/O Card (8 x COM ports - Supports RS-232/422/485)
- Please see user manual for drawings (where applicable).
• 1 x PCI + 1 x PCIex1 (Both Full Height & Half Length)
• 4GB (Dual Channel 200-pin DDR2 800MHz SO-DIMM)
MECHANICAL DESCRIPTION
Physical Specifications:
Environmental Considerations:
Without mounting bracket:
• 270.00 (W) x 105.95 (H) x 310.00 (D) mm
• 10.63" (W) x 4.17" (H) x 12.20" (D)
With mounting bracket:
• 353.00 (W) x 109.95 (H) x 405.00 (D) mm
• 13.90" (W) x 4.33" (H) x 15.94" (D)
• Operating
• Weight: Approx 5 kg
• Aluminium Cooling Chassis
• Power button, power led, reset button and HDD Led
: Temperature -15 deg. C to +55 deg. C
Humidity up to 95%
• Storage
: Temperature -20 deg. C to +60 deg. C
Humidity up to 95%
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Compass Safe Distance HT B18 STD-Axxx - Standard: 75cm - Steering: 45cm - MTBF (Mean Time Between Failures) = 44622 hours
APPROVALS
& CERTIFICATES
These products have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002)
IACS E10
EN61162 (pending)
ClassNK - Nippon Kaiji Kyokai (pending)
DNV - Det Norske Veritas (pending)
GL - Germanischer Lloyd (pending)
BV - Bureau Veritas (pending) ABS - American Bureau of Shipping (pending)
LRS - Lloyd’s Register of Shipping (pending)
2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising