Using VMware Workstation Pro
Using VMware Workstation Pro
Workstation 12 Pro
VMware Workstation Pro 12.0
VMware Workstation Pro 12.1
This document supports the version of each product listed and
supports all subsequent versions until the document is
replaced by a new edition. To check for more recent editions of
this document, see http://www.vmware.com/support/pubs.
EN-001870-02
Using VMware Workstation Pro
You can find the most up-to-date technical documentation on the VMware Web site at:
http://www.vmware.com/support/
The VMware Web site also provides the latest product updates.
If you have comments about this documentation, submit your feedback to:
docfeedback@vmware.com
Copyright © 2015, 2016 VMware, Inc. All rights reserved. Copyright and trademark information.
VMware, Inc.
3401 Hillview Ave.
Palo Alto, CA 94304
www.vmware.com
2
VMware, Inc.
Contents
Using VMware Workstation Pro
7
1 Updated Information 9
2 Introduction and System Requirements 13
Host System Requirements for Workstation Pro 13
Virtual Machine Features and Specifications 16
3 Installing and Using Workstation Pro 21
Obtaining the Workstation Pro Software and License Key 21
Installing Workstation Pro with Other VMware Products 22
Reinstalling Workstation Pro When Upgrading a Windows Host Operating System
Installing the Integrated Virtual Debuggers for Eclipse 23
Installing Workstation Pro 23
Upgrading Workstation Pro 28
Uninstalling Workstation Pro 33
Start Workstation Pro 34
Using the Workstation Pro Window 34
Using the Workstation Pro Online Help 38
22
4 Creating Virtual Machines 39
Understanding Virtual Machines 39
Preparing to Create a New Virtual Machine 40
Create a New Virtual Machine on the Local Host
Cloning Virtual Machines 54
Virtualize a Physical Machine 57
Importing Virtual Machines 59
Installing and Upgrading VMware Tools 60
Virtual Machine Files 71
50
5 Using Virtual Machines 73
Starting Virtual Machines 73
Stopping Virtual Machines 76
Transferring Files and Text 80
Add a Host Printer to a Virtual Machine 89
Using Removable Devices in Virtual Machines 90
Changing the Virtual Machine Display 96
Using Folders to Manage Virtual Machines 102
Taking Snapshots of Virtual Machines 105
Install New Software in a Virtual Machine 111
Take a Screenshot of a Virtual Machine 112
VMware, Inc.
3
Using VMware Workstation Pro
Delete a Virtual Machine
113
6 Configuring and Managing Virtual Machines 115
Configure Power Options and Power Control Settings 115
Set Workstation Pro Display Preferences 117
Configure Display Settings for a Virtual Machine 118
Set Preferences for Unity Mode 121
Setting Screen Color Depth 121
Using Advanced Linux Sound Architecture 122
Encrypting and Restricting Virtual Machines 123
Moving Virtual Machines 127
Configure a Virtual Machine as a VNC Server 132
Change the Hardware Compatibility of a Virtual Machine 135
Clean Up a Virtual Hard Disk on Windows Hosts 137
Export a Virtual Machine to OVF Format 137
Writing and Debugging Applications That Run In Virtual Machines
138
7 VMware Workstation Server Log Files 141
8 Configuring and Managing Devices 143
Configuring DVD, CD-ROM, and Floppy Drives 143
Configuring a USB Controller 145
Configuring and Maintaining Virtual Hard Disks 147
Adding a Physical Disk to a Virtual Machine 154
Configuring Virtual Ports 156
Configuring Generic SCSI Devices 161
Configuring Sixteen-Way Virtual Symmetric Multiprocessing
Configuring Keyboard Features 164
Modify Hardware Settings for a Virtual Machine 173
163
9 Configuring Network Connections 175
Understanding Virtual Networking Components 175
Understanding Common Networking Configurations 176
Changing the Default Networking Configuration 177
Configuring Bridged Networking 181
Configuring Network Address Translation 184
Configuring Host-Only Networking 193
Assigning IP Addresses in Host-Only Networks and NAT Configurations 199
Configuring LAN Segments 203
Configuring Samba for Workstation Pro 204
Using Virtual Network Adapters in Promiscuous Mode on Linux Hosts 205
Maintaining and Changing MAC Addresses for Virtual Machines 206
Sample Custom Networking Configuration 207
10 Using Remote Connections and Sharing Virtual Machines 211
Understanding VMware Workstation Server
Connect to a Remote Server 214
Disconnect from a Remote Server 216
4
211
VMware, Inc.
Contents
Creating and Managing Shared Virtual Machines
216
Uploading Virtual Machines to Remote Servers 219
Download a Virtual Machine from a Remote Server 221
Create a Virtual Machine on a Remote Host 222
Configure Shared and Remote Virtual Machines to Start with the Host
Using Roles to Assign Privileges 224
Using Permissions to Restrict Users 227
223
11 Changing Workstation Pro Preference Settings 231
Configuring Workspace Preference Settings 231
Configuring Input Preference Settings 234
Changing Hot-Key Combinations 236
Configuring Workstation Pro Display Preference Settings 236
Configuring Software Update Preference Settings 238
Sending System Data and Usage Statistics to VMware 240
Changing Shared Virtual Machine Preference Settings 241
Configuring Workstation Pro Memory Preference Settings 242
Configuring Workstation Pro Priority Preference Settings 243
Configuring Device Settings for Windows Hosts 244
12 Configuring Virtual Machine Option Settings 247
Configuring General Option Settings for a Virtual Machine 247
Configuring Power Settings for a Virtual Machine 249
Configuring Snapshot Options for a Virtual Machine 250
Configuring AutoProtect Options for a Virtual Machine 251
Configuring Guest Isolation Options for a Virtual Machine 252
Configuring Tablet Sensor Input Options for a Virtual Machine 252
Configuring VMware Tools Options for a Virtual Machine 253
Configuring a Virtual Machine as a VNC Server 254
Configuring Unity Mode for a Virtual Machine 254
Configuring Appliance Details for a Virtual Machine 255
Configuring Autologin for a Virtual Machine 255
Configuring Advanced Options for a Virtual Machine 256
13 Configuring Virtual Machine Hardware Settings 259
Adding Hardware to a Virtual Machine 259
Removing Hardware from a Virtual Machine 261
Adjusting Virtual Machine Memory 261
Configuring Virtual Machine Processor Settings 261
Configuring and Maintaining Virtual Hard Disks 262
Configuring CD-ROM and DVD Drive Settings 264
Configuring Floppy Drive Settings 266
Configuring Virtual Network Adapter Settings 266
Configuring USB Controller Settings 270
Configuring Sound Card Settings 271
Configuring Parallel Port Settings 271
Configuring Serial Port Settings 271
Configuring Generic SCSI Device Settings 272
VMware, Inc.
5
Using VMware Workstation Pro
Configuring Printer Settings
273
Configuring Display Settings 273
Installing a Guest Operating System on a Physical Disk or Unused Partition
274
14 Using the Virtual Network Editor 275
Add a Bridged Virtual Network 276
Add a Host-Only Virtual Network 277
Change Automatic Bridging Settings 278
Change NAT Settings 278
Change DHCP Settings on a Windows Host 280
15 Running the Support Script 281
Register and Create a Support Request 281
Run the Support Script from Workstation Pro 282
Run the Support Script from a Windows Command Prompt 282
Run the Support Script from a Linux Terminal Window 283
16 Using the vmware Command 285
Run the vmware Command 285
Incorporate Workstation Pro Startup Options in a Windows Shortcut
286
Index 287
6
VMware, Inc.
Using VMware Workstation Pro
Using VMware Workstation Pro describes how to use VMware Workstation Pro™ to create, configure, and
manage virtual machines.
Intended Audience
This information is intended for anyone who wants to install, upgrade, or use Workstation Pro. The
information is written for experienced Windows or Linux system administrators who are familiar with
virtual machine technology and datacenter operations.
VMware, Inc.
7
Using VMware Workstation Pro
8
VMware, Inc.
Updated Information
1
Using VMware Workstation Pro is updated with each release of the product or when necessary.
This table provides the update history of Using VMware Workstation Pro.
VMware, Inc.
9
Using VMware Workstation Pro
Revision
Description
EN-001870-02
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
10
Updated “Supported Guest Operating Systems,” on
page 16 to add a link to the VMware Compatibility
Guide site.
Updated “Virtual Machine Processor Support,” on
page 16 to reflect the supported functionality.
Updated “Install Workstation Pro on a Windows
Host,” on page 23 to remove a procedure step no
longer supported.
Updated “Run an Unattended Workstation Pro
Installation on a Windows Host,” on page 24 to reflect
the supported functionality.
Updated “Installation Properties,” on page 25 to
remove parameters no longer supported.
Removed "REMOVE Property Values".
Updated “Install Workstation Pro on a Linux Host,” on
page 26 to add a statement to use your regular user
name, not root, to log in when Workstation Pro starts.
Updated the option examples in “Linux Command
Line Installation Options,” on page 27.
Updated “Upgrade Workstation Pro on a Windows
Host,” on page 29 to remove a procedure step no
longer supported.
Moved the location of “Worksheet for Creating a
Virtual Machine,” on page 40.
Added “Selecting the Firmware Type,” on page 43.
Updated “Virtualize a Physical Machine,” on page 57
to add a note stating that you can use vCenter
Converter Standalone to virtualize a Linux physical
machine.
Corrected the procedure in “Import a Windows XP
Mode Virtual Machine,” on page 59 to reflect the
supported functionality.
Updated “Add a Host Printer to a Virtual Machine,” on
page 89 to add a prerequisite that the virtual machine
must be powered on or off before adding a printer.
Updated “Connecting USB Devices to Virtual
Machines,” on page 90 to add a statement for how to
manually connect a USB device to a virtual machine.
Updated the global configuration file location in
“Disable Smart Card Sharing,” on page 95.
Corrected the procedure in “Use Multiple Monitors for
One Virtual Machine,” on page 99 to reflect the
supported functionality.
Added the Combine tabs with toolbar in full screen
option to “Set Workstation Pro Display Preferences,”
on page 117.
Updated “Move a Virtual Machine to a New Location
or Host,” on page 128 to clarify what virtual machine
files must be moved.
Updated “Limitations of Moving a Virtual Machine to
a Different Host,” on page 129 to reflect the supported
functionality.
Updated step 12 in “Add a New Virtual Hard Disk to a
Virtual Machine,” on page 149 to add examples of
guest operating system tools used to partition and
format the new drive.
Updated “Expand a Virtual Hard Disk,” on page 151 to
provide information on how to determine whether a
virtual machine is a linked clone or the parent of a
linked clone.
VMware, Inc.
Chapter 1 Updated Information
Revision
Description
n
n
n
n
n
n
EN-001870-01
n
n
n
n
n
n
n
n
n
n
n
n
VMware, Inc.
Changed "Configuring Eight-Way Symmetric
Multiprocessing" to “Configuring Sixteen-Way Virtual
Symmetric Multiprocessing,” on page 163 to reflect the
supported functionality.
Changed "Configure Eight-way Symmetric
Multiprocessing" to “Configure Sixteen-Way Virtual
Symmetric Multiprocessing,” on page 163 to reflect the
supported functionality.
Changed "Use a Virtual Machine That Has More Than
Eight Virtual Processors" to “Use a Virtual Machine
That Has More Than Sixteen Virtual Processors,” on
page 164 to reflect the supported functionality.
Updated “Add a Virtual Network Adapter to a Virtual
Machine,” on page 178 to reflect the options available
in the product.
Added a statement to “Configuring Workstation Pro
Display Preference Settings,” on page 236 that "If you
are using Windows 8.1 (Update 2) or Windows 10,
Workstation Pro detects the DPI on each monitor and
scales the virtual machine to machine the DPI on the
host.
Added a note to “Removing Hardware from a Virtual
Machine,” on page 261 stating that you cannot remove
hardware from a virtual machine while it is in
suspended state.
Removed references to deprecated guest operating
systems in the document.
Added support for Windows Server 2012 R2 as a host.
Removed requirement in “Processor Requirements for
Host Systems,” on page 13 for "LAHF/SAHF support
in long mode". This requirement applies only to older
64-bit CPUs produced before 2006.
Updated “Virtual Machine Graphics and Keyboard
Support,” on page 16 to add a statement clarifying
OpenGL3.3 support.
Updated “Installation Properties,” on page 25 to fix
the example for the SERIALNUMBER property.
Added “Enable EFI Support,” on page 76.
Updated “Guest Operating Systems That Support
Shared Folders,” on page 83 to reflect supported guest
operating systems.
Updated “Configure Display Settings for a Virtual
Machine,” on page 118 to add the Display Scaling
option.
Updated “Prepare the Host System to Use 3D
Accelerated Graphics,” on page 119 to add a statement
clarifying OpenGL3.3 support.
Updated the existing section "Changing NAT Settings
on a Windows Host" to “Change NAT Settings,” on
page 186 to add support for NAT on Linux hosts.
Removed a note in “Upload a Virtual Machine to
VMware vCloud Air,” on page 221 stating that only
Windows virtual machines can be uploaded to
VMware vCloud Air.
Added “Changing the Remote Server Login Privacy
Setting,” on page 234.
11
Using VMware Workstation Pro
Revision
Description
n
n
n
n
n
n
EN-001870-00
12
Updated “Configuring Snapshot Options for a Virtual
Machine,” on page 250 to add the Take a new
Snapshot option. This option was removed in
Workstation Pro 12.0 and restored in Workstation Pro
12.0.1.
Corrected an error in “Configuring AutoProtect
Options for a Virtual Machine,” on page 251. The
statement in the previous version, "AutoProtect
snapshots are not taken in Workstation Pro, even if
AutoProtect is enabled for the virtual machine in
Workstation Pro," is incorrect.
The statement should read "AutoProtect snapshots are
not taken in Workstation Player, even if AutoProtect is
enabled for the virtual machine in Workstation Pro".
Updated “Gathering Debugging Information,” on
page 256 to add the Gather verbose USB debugging
information option.
Renamed the "Configuring Memory Page Trimming
and Template Mode" section to “Configuring
Advanced Settings for a Virtual Machine,” on page 257
and added the Boot from EFI Instead of BIOS option.
Updated “Change Automatic Bridging Settings,” on
page 278 to add support for NAT on Linux hosts.
Support for this feature was added in Workstation Pro
12.0.
Updated the "Changing DHCP Settings on a Windows
Host" section to “Change DHCP Settings on a
Windows Host,” on page 280.
Initial release.
VMware, Inc.
Introduction and System
Requirements
2
Host computers that run Workstation Pro must meet specific hardware and software requirements. Virtual
machines that run in Workstation Pro support specific devices and provide certain features.
This chapter includes the following topics:
n
“Host System Requirements for Workstation Pro,” on page 13
n
“Virtual Machine Features and Specifications,” on page 16
Host System Requirements for Workstation Pro
The physical computer on which you install Workstation Pro is called the host system and its operating
system is called the host operating system. To run Workstation Pro, the host system and the host operating
system must meet specific hardware and software requirements.
Processor Requirements for Host Systems
You must install Workstation Pro on a host system that meets certain processor requirements.
Supported Processors
The host system must have a 64-bit x86 CPU with 1.3 GHz or faster core speed. Multiprocessor systems are
supported.
When you install Workstation Pro, the installer performs checks to make sure the host system has a
supported processor. You cannot install Workstation Pro if the host system does not meet the processor
requirements.
Processor Requirements for 64-Bit Guest Operating Systems
The operating system that runs inside a virtual machine is called the guest operating system. To run 64-bit
guest operating systems, the host system must have one of the following processors.
n
An AMD CPU that has segment-limit support in long mode
n
An Intel CPU that has VT-x support
If you have an Intel CPU that has VT-x support, you must verify that VT-x support is enabled in the host
system BIOS. The BIOS settings that must be enabled for VT-x support vary depending on the system
vendor. See the VMware knowledge base article at http://kb.vmware.com/kb/1003944 for information about
how to determine if VT-x support is enabled.
When you install a 64-bit operating system, Workstation Pro performs checks to make sure the host system
has a supported processor. You cannot install a 64-bit operating system if the host system does not meet the
processor requirements.
VMware, Inc.
13
Using VMware Workstation Pro
Processor Requirements for Windows 7 Aero Graphics
To support Windows 7 Aero graphics, the host system should have either an Intel Dual Core 2.2 GHz or
later CPU or an AMD Athlon 4200+ or later CPU.
Supported Host Operating Systems
You can install Workstation Pro on Windows and Linux host operating systems.
To see a list of the supported host operating systems, search the online VMware Compatibility Guide on the
VMware Web site.
Memory Requirements for Host Systems
The host system must have enough memory to run the host operating system, the guest operating systems
that run inside the virtual machines on the host system, and the applications that run in the host and guest
operating systems.
The minimum memory required on the host system is 1 GB. 2 GB and above is recommended.
To support Windows 7 Aero graphics in a virtual machine, at least 3 GB of host system memory is required.
1 GB of memory is allocated to the guest operating system and 256 MB is allocated to graphics memory.
See your guest operating system and application documentation for more information on memory
requirements.
Display Requirements for Host Systems
The host system must have a 16-bit or 32-bit display adapter. Use the latest graphics driver recommended
for the host system.
To support Windows 7 Aero graphics, the host system should have either an NVIDIA GeForce 8800GT or
later or an ATI Radeon HD 2600 or later graphics processor.
Important 3D benchmarks, such as 3DMark '06, might not render correctly or at all when running
Windows Vista or Windows 7 virtual machines on some graphics hardware.
14
VMware, Inc.
Chapter 2 Introduction and System Requirements
Disk Drive Requirements for Host Systems
Host systems must meet certain disk drive requirements. Guest operating systems can reside on physical
disk partitions or in virtual disk files.
Table 2‑1. Disk Drive Requirements for Host Systems
Drive Type
Requirements
Hard disk
n
n
n
Optical CD-ROM and DVD
n
n
n
Floppy
IDE, SATA, and SCSI hard drives are supported.
At least 1 GB free disk space is recommended for each guest operating system
and the application software used with it. If you use a default setup, the
actual disk space needs are approximately the same as those for installing
and running the guest operating system and applications on a physical
computer.
For basic installation, 1.5 GB free disk space is required on Windows and
Linux. You can delete the installer after the installation is complete to reclaim
disk space.
IDE, SATA, and SCSI optical drives are supported.
CD-ROM and DVD drives are supported.
ISO disk image files are supported.
Virtual machines can connect to disk drives on the host computer. Floppy disk
image files are also supported.
Solid-State Drives
If your host machine has a physical solid-state drive (SSD), the host informs guest operating systems they
are running on an SSD.
This allows the guest operating systems to optimize behavior. How the virtual machines recognize SSD and
use this information depends on the guest operating system and the disk type of the virtual disk (SCSI,
SATA, or IDE).
n
On Windows 8, Windows 10, Ubuntu, and Red Hat Enterprise Linux virtual machines, all drive types
can report their virtual disks as SSD drives.
n
On Windows 7 virtual machines, only IDE and SATA virtual disks can report their virtual disks as SSD.
SCSI virtual disks only report as SSD when used as a system drive in a virtual machine, or as a
mechanical drive when used as a data drive inside a virtual machine.
n
On Mac virtual machines, only SATA virtual disks are reported as SSD. IDE and SCSI virtual disks are
reported as mechanical drives.
Use the virtual machine operating system to verify your virtual machine is using SSD as its virtual disk.
Local Area Networking Requirements for Host Systems
You can use any Ethernet controller that the host operating system supports.
Non-Ethernet networks are supported by using built-in network address translation (NAT) or by using a
combination of host-only networking and routing software on the host operating system.
ALSA Requirements
To use ALSA in a virtual machine, the host system must meet certain requirements.
n
The ALSA library version on the host system must be version 1.0.16 or later.
n
The sound card on the host system must support ALSA. The ALSA project Web site maintains a current
listing of sound cards and chipsets that support ALSA.
VMware, Inc.
15
Using VMware Workstation Pro
n
The sound device on the host system must not be muted.
n
The current user must have the appropriate permissions to use the sound device.
Virtual Machine Features and Specifications
Workstation Pro virtual machines support specific devices and provide certain features.
Supported Guest Operating Systems
A guest operating system can be Windows, Linux, and other commonly used operating systems.
For the most recent list of guest operating systems that VMware products support, see the VMware
Compatibility Guide site: http://www.vmware.com/resources/compatibility/search.php.
For instructions about how to install the most common guest operating systems, see the VMware Guest
Operating System Installation Guide: http://partnerweb.vmware.com/GOSIG/home.html.
Virtual Machine Processor Support
Virtual machines support certain processor features.
n
The same as the processor on the host computer.
n
One virtual processor on a host system that has one or more logical processors.
n
Up to 16 virtual processors (sixteen-way virtual symmetric multiprocessing, or Virtual SMP) on a host
system that has at least 2 logical processors.
Note Workstation Pro considers multiprocessor hosts that have 2 or more physical CPUs, singleprocessor hosts that have a multicore CPU, and single-processor hosts that have hyperthreading
enabled, to have two logical processors.
Virtual Machine Chip Set and BIOS Support
Virtual machines support certain virtual machine chip set and BIOS features.
n
Intel 440BX-based motherboard
n
NS338 SIO chip set
n
82093AA I/O Advanced Programmable Controller (I/O APIC)
n
Phoenix BIOS 4.0 Release 6 with VESA BIOS
Virtual Machine Memory Allocation
The total amount of memory that you can assign to all virtual machines running on a single host system is
limited only by the amount of RAM on the host.
On 64-bit hosts, the maximum amount of memory for each virtual machine is 64GB. On 32-bit hosts, the
maximum amount of memory for each virtual machine is 8GB. Workstation Pro prevents powering on
virtual machines that are configured to use more than 8GB of memory on 32-bit hosts. Memory
management limitations on 32-bit operating systems cause virtual machine memory to overcommit, which
severely affects system performance.
Virtual Machine Graphics and Keyboard Support
Virtual machines support certain graphics features.
n
16
VGA and SVGA are supported.
VMware, Inc.
Chapter 2 Introduction and System Requirements
n
104-key Windows 95/98 enhanced keyboards are supported.
n
To use the GL_EXT_texture_compression_s3tc and GL_S3_s3tc Open Graphics Library (OpenGL)
extensions in a Windows XP or Windows 7 or later guest operating system, you must install Microsoft
DirectX End-User Runtime in the guest operating system. OpenGL is an API that is used to define 2D
and 3D computer graphics. You can download Microsoft DirectX End-User Runtime from the Microsoft
Download Center Web site.
The VMware guest operating system OpenGL driver for Windows and Linux supports the OpenGL 3.3
core profile only. The OpenGL3.3 compatibility profile is not supported.
Virtual Machine IDE Drive Support
Virtual machines support certain IDE drives and features.
n
Up to four devices, including disk, CD-ROM, and DVD drives, are supported.
n
DVD drives can be used to read data DVD discs only.
n
DVD video is not supported.
n
Hard disks can be virtual disks or physical disks.
n
IDE virtual disks can be up to 8TB.
n
CD-ROM drives can be physical devices or ISO image files.
Virtual Machine SCSI Device Support
Virtual machines support certain SCSI devices and features.
n
Up to 60 devices are supported.
n
SCSI virtual disks can be up to 8TB.
n
Hard disks can be virtual disks or physical disks.
n
With Generic SCSI support, you can use devices in a virtual machine without installing drivers in the
host operating system. Generic SCSI support works with scanners, CD-ROM drives, DVD drives, tape
drives, and other SCSI devices.
n
The LSI Logic LSI53C10xx Ultra320 SCSI I/O controller is supported.
Virtual Machine Floppy Drive Support
Virtual machines can have floppy drives.
n
Up to two 2.88MB floppy devices are supported.
n
Floppy drives can be physical drives or floppy image files.
Virtual Machine Serial and Parallel Port Support
Virtual machines support serial (COM) and parallel (LPT) ports.
n
Up to four serial (COM) ports are supported. Output can be sent to serial ports, Windows or Linux files,
or named pipes.
n
Up to three bidirectional parallel (LPT) ports. Output can be sent to parallel ports or host operating
system files.
VMware, Inc.
17
Using VMware Workstation Pro
Virtual Machine USB Port Support
Virtual machines can have USB ports and can support certain USB devices.
n
USB 1.1 UHCI (Universal Host Controller Interface) is supported for all virtual machine hardware
versions.
n
USB 2.0 EHCI (Enhanced Host Controller Interface) controllers are supported if the virtual machine
hardware is compatible with Workstation 6 and later virtual machines.
n
USB 3.0 xHCI (Extensible Host Controller Interface) support is available for Linux guests running
kernel version 2.6.35 or later and for Windows 8 guests. The virtual machine hardware must be
compatible with Workstation 8 and later virtual machines.
n
Support for USB 2.0 and 3.0 requires that you configure virtual machine settings to enable USB 2.0 and
3.0 support and that you have compatible guest operating systems and virtual machine hardware
versions.
n
Most USB devices are supported, including USB printers, scanners, PDAs, hard disk drives, memory
card readers, and digital cameras. Streaming devices, such as webcams, speakers, and microphones, are
also supported.
Virtual Machine Mouse and Drawing Tablet Support
Virtual machines support certain types of mice and drawing tablets.
n
PS/2 and USB mouse types are supported.
n
Serial tablets are supported.
n
USB tablets are supported.
Virtual Machine Ethernet Card Support
Virtual machines support certain types of Ethernet cards.
n
Up to 10 virtual Ethernet cards are supported.
n
The AMD PCnet-PCI II Ethernet Adapter is supported. For 64-bit guests, the Intel Pro/1000 MT Server
Adapter is also supported.
Virtual Machine Networking Support
Virtual machines support certain Ethernet switches and networking protocols.
n
Up to 10 virtual Ethernet switches are supported on Windows host operating systems. Up to 255 virtual
Ethernet switches are supported on Linux host operating systems.
n
Three switches are configured by default for bridged, host-only, and NAT networking.
n
Most Ethernet-based protocols are supported, including TCP/IP, NetBEUI, Microsoft Networking,
Samba, Novell NetWare, and Network File System (NFS).
n
Built-in NAT networking supports client software that uses TCP/IP, FTP, DNS, HTTP, and Telnet. VPN
is supported for PPTP over NAT.
Virtual Machine Sound Support
Workstation Pro provides a sound device that is compatible with the Sound Blaster AudioPCI and Intel
High-Definition Audio Specification. The Workstation Pro sound device is enabled by default.
Workstation Pro supports sound in all supported Windows and Linux guest operating systems.
18
VMware, Inc.
Chapter 2 Introduction and System Requirements
Sound support includes pulse code modulation (PCM) output and input. You can play .wav files, MP3
audio, and Real Media audio. MIDI output from Windows guest operating systems is supported by the
Windows software synthesizer. MIDI input is not supported, and no MIDI support is available for Linux
guest operating systems.
Windows XP, Windows Vista, Windows 7 and most recent Linux distributions detect the sound device and
install appropriate drivers for it.
For Workstation 7.x and earlier virtual machines, the vmaudio driver in VMware Tools is installed in 64-bit
Windows XP, Windows 2003, Windows Vista, Windows 2008, and Windows 7 guest operating systems and
in 32-bit Windows 2003, Windows Vista, Windows 2008, and Windows 7 guest operating systems.
For Workstation 8.x and later virtual machines, the High-Definition Audio (HD Audio) device is presented
by default for both 64-bit and 32-bit Windows Vista and Windows 7 guest operating systems and their
server counterparts. Windows provides a driver for HD Audio that is not part of VMware Tools.
On Linux host systems, Workstation 7.x and later supports Advanced Linux Sound Architecture (ALSA).
Earlier versions of Workstation use the Open Sound System (OSS) interface for sound playback and
recording in virtual machines running on Linux host systems. Unlike OSS, ALSA does not require exclusive
access to the sound device. The host system and multiple virtual machines can play sound at the same time.
VMware, Inc.
19
Using VMware Workstation Pro
20
VMware, Inc.
Installing and Using Workstation Pro
3
You can install Workstation Pro on a Linux or Windows host system. Installing or upgrading
Workstation Pro typically involves running a standard GUI wizard.
This chapter includes the following topics:
n
“Obtaining the Workstation Pro Software and License Key,” on page 21
n
“Installing Workstation Pro with Other VMware Products,” on page 22
n
“Reinstalling Workstation Pro When Upgrading a Windows Host Operating System,” on page 22
n
“Installing the Integrated Virtual Debuggers for Eclipse,” on page 23
n
“Installing Workstation Pro,” on page 23
n
“Upgrading Workstation Pro,” on page 28
n
“Uninstalling Workstation Pro,” on page 33
n
“Start Workstation Pro,” on page 34
n
“Using the Workstation Pro Window,” on page 34
n
“Using the Workstation Pro Online Help,” on page 38
Obtaining the Workstation Pro Software and License Key
The Workstation Pro installation software is in the file that you downloaded and the license key is sent to
you in email.
The installation files for both host platforms are included in the packaged distribution. You can use the
license key on both the Windows and Linux versions of Workstation Pro. You need one license for each host
system.
If you do not enter the Workstation Pro license key during installation, you can specify the license key later,
in Workstation Pro, select Help > Enter License Key and enter the license key on the Workstation Activation
dialog box. You can also purchase a license key and view the status of an evaluation license from the
Workstation Activation dialog box.
See the VMware Web site for information on obtaining an evaluation license.
Note If you have an invalid license, Workstation Pro prompts you to enter a license key each time you
attempt to power on a virtual machine.
VMware, Inc.
21
Using VMware Workstation Pro
Once you have installed Workstation Pro, you can find your license key in the About VMware Workstation
Pro window. Click Help > About VMware Workstation Pro.
n
If you have an individual license for Workstation Pro, the key is displayed in the License Information
section under Type. It is labeled Individual and followed by your license key.
n
If you have a version of Workstation Pro licensed for multiple users, the Type field displays Volume and
your license key is not displayed.
n
If you did not enter a license for Workstation Pro, the Type field displays Not applicable and a license key
is not displayed.
n
If you have an evaluation license key for Workstation Pro, the Type field displays Not applicable. The
date the evaluation license key expires is also displayed.
Trial Version Expiration Date Warnings
When you use the trial version of VMware Workstation Pro, a notice appears on the home page advising
you of the trial license expiration date.
To purchase a license key click, click Get a license key. If you have a license key, click Enter a license key.
You can also go to the Help menu and click Enter a license key.
Installing Workstation Pro with Other VMware Products
The only VMware products that can share a host system with Workstation Pro are VMware vSphere Client
and VMware vCenter Converter Standalone. You cannot install Workstation Pro on a host system that has
any other VMware virtualization products installed.
If the host system has another VMware virtualization product installed, you must uninstall that product
before you install Workstation Pro.
Reinstalling Workstation Pro When Upgrading a Windows Host
Operating System
Before you upgrade the operating system on a Microsoft Windows host, VMware recommends that you
uninstall VMware Workstation Pro.
The way Workstation Pro is installed and configured depends partly on the version of Windows used. As a
best practice, to ensure that Workstation Pro is properly configured for a new operating system, you must
remove the Workstation Pro application before you perform the operating system upgrade. Uninstalling
Workstation Pro guarantees that legacy components that apply only to older versions of Windows are not
left behind .
For example, if you do not uninstall Workstation Pro before upgrading the Windows operating system,
some virtual network adapters might not function properly after the operating system upgrade. Before you
uninstall Workstation Pro, open the virtual network editor and note the settings used. You must configure
these settings again after you reinstall Workstation Pro.
When you uninstall Workstation Pro, you need only uninstall the Workstation Pro application, not the
virtual machines that you have created. When the operating system upgrade is complete, reinstall
Workstation Pro or, if you are also upgrading Workstation Pro, install the new version of Workstation Pro.
22
VMware, Inc.
Chapter 3 Installing and Using Workstation Pro
Installing the Integrated Virtual Debuggers for Eclipse
If you plan to use the Integrated Virtual Debugger for Eclipse, you should install it on the host system before
you install Workstation Pro.
If you must install the Integrated Virtual Debugger for Eclipse after you install Workstation Pro, run the
Workstation Pro installer again and select Modify/Change to install the associated Workstation Pro plugins.
See the Integrated Virtual Debugger for Eclipse Developer’s Guide for host system requirements and supported
operating systems. This guide is available on the VMware Web site.
Installing Workstation Pro
You can install Workstation Pro on a Windows host system by running the installation wizard or by using
the unattended installation feature of the Microsoft Windows Installer (MSI). The MSI unattended
installation feature is useful if you are installing Workstation Pro on several Windows hosts and do not want
to respond to wizard prompts. You install Workstation Pro on a Linux host system by running the
Workstation Pro bundle installer.
n
Install Workstation Pro on a Windows Host on page 23
You run the Windows setup program and installation wizard to install Workstation Pro on a Windows
host system.
n
Run an Unattended Workstation Pro Installation on a Windows Host on page 24
You can use the unattended installation feature of the Microsoft Windows Installer (MSI) to install
Workstation Pro on Windows host systems without having to respond to wizard prompts. This feature
is convenient in a large enterprise.
n
Install Workstation Pro on a Linux Host on page 26
You run the Linux bundle installer to install Workstation Pro on a Linux host system. On most Linux
distributions, the Linux bundle installer launches a GUI wizard. On some Linux distributions,
including Red Hat Enterprise Linux 5.1, the bundle installer launches a command-line wizard instead
of a GUI wizard. You can run the installer with the --console option to install Workstation Pro in a
terminal window.
Install Workstation Pro on a Windows Host
You run the Windows setup program and installation wizard to install Workstation Pro on a Windows host
system.
Remote connections and virtual machine sharing are enabled by default when you install Workstation Pro.
With remote connections, you can connect to remote hosts and run remote virtual machines. With virtual
machine sharing, you can create virtual machines that other instances of Workstation Pro can access
remotely.
Prerequisites
n
Verify that the host system meets the host system requirements. See “Host System Requirements for
Workstation Pro,” on page 13.
n
Verify that you have administrative privileges on the host system.
n
Verify that no incompatible VMware products are installed on the host system. See “Installing
Workstation Pro with Other VMware Products,” on page 22.
n
Obtain the Workstation Pro software and license key. See “Obtaining the Workstation Pro Software and
License Key,” on page 21.
VMware, Inc.
23
Using VMware Workstation Pro
n
If you plan to use the Integrated Virtual Debugger for Eclipse, install it on the host system. See
“Installing the Integrated Virtual Debuggers for Eclipse,” on page 23.
Procedure
1
Log in to the Windows host system as the Administrator user or as a user who is a member of the local
Administrators group.
If you log in to a domain, the domain account must also be a local administrator.
2
Double-click the VMware-workstation-xxxx-xxxxxxx.exe file, where xxxx-xxxxxxx is the version and
build numbers.
3
Follow the prompts to finish the installation.
Depending on your configuration, you might need to restart the host system to finish the installation.
After Workstation Pro is installed, the VMware Workstation Server service starts on the host system. The
VMware Workstation Server service starts whenever you restart the host system.
Run an Unattended Workstation Pro Installation on a Windows Host
You can use the unattended installation feature of the Microsoft Windows Installer (MSI) to install
Workstation Pro on Windows host systems without having to respond to wizard prompts. This feature is
convenient in a large enterprise.
Prerequisites
n
Verify that the host system meets the host system requirements. See “Host System Requirements for
Workstation Pro,” on page 13.
n
Verify that no incompatible VMware products are installed on the host system. See “Installing
Workstation Pro with Other VMware Products,” on page 22.
n
Obtain the Workstation Pro software and license key. See “Obtaining the Workstation Pro Software and
License Key,” on page 21.
n
If you plan to use the Integrated Virtual Debugger for Eclipse, install it on the host system. See
“Installing the Integrated Virtual Debuggers for Eclipse,” on page 23.
n
Verify that the host computer has version 2.0 or later of the MSI runtime engine. This version of the
installer is available in versions of Windows beginning with Windows XP and is available from
Microsoft. For more information, see the Microsoft Web site.
n
Familiarize yourself with the installation properties. See “Installation Properties,” on page 25.
Procedure
1
Log in to the host system as the Administrator user or as a user who is a member of the local
Administrators group.
If you log in to the domain, the domain account must also be a local administrator.
2
Extract the administrative installation image from the setup file.
The setup filename is similar to VMware=workstation-xxxx-xxxx.exe where xxxx-xxxx is the version and
build number.
For example, if you enter setup.exe/?, the flag displays a windows message box with the command line
usage for the installer.
24
VMware, Inc.
Chapter 3 Installing and Using Workstation Pro
3
Enter the installation command on one line.
The following example installs Workstation Pro:
VMware-workstation-full-x.x.x-xxxxxx.exe /s /v/qn EULAS_AGREED=1 SERIALNUMBER="xxxxx-xxxxxxxxxx-xxxxx-xxxxx" AUTOSOFTWAREUPDATE=1
You can use the optional INSTALLDIR property to specify a file path for the installation that is different
from the default location.
Note The double quotes around the file path are important. All the MSI arguments are passed with
the /v option. The outer quotes group the MSI arguments and the double quotes put a quote in that
argument.
You can also run an unattended uninstallation of Workstation Pro on a Windows host. The following
example uninstalls Workstation Pro and removes the license from the host.
VMware-workstation-full-x.x.x-xxxxxx.exe /s /v"/qn REMOVE=ALL"
Installation Properties
When you perform an unattended installation of Workstation Pro, you can customize the installation by
specifying installation properties in the installation command.
To specify an installation property in the installation command, use the format property="value". A value of 1
means true and a value of 0 means false.
Table 3‑1. Installation Properties
Property
Description
Default Value
AUTOSOFTWAREUPDATE
Enables automatic upgrades for Workstation Pro or
Workstation Player when a new build becomes available.
1
DATACOLLECTION
Sends user experience information to VMware.
1
DESKTOP_SHORTCUT
Adds a shortcut on the desktop when Workstation Pro is
installed.
1
ENABLE_VIRTUAL_PRINTING
Enables support for ThinPrint virtual printing on the Windows
host after installing.
0
EULAS_AGREED
Allows you to silently accept the product EULAs. Set to 1 to
complete the installation or upgrade.
0
INSTALLDIR
Install Workstation Pro in a directory that is different from the
default Workstation Pro location.
C:\Program Files
(86)\VMware\VMwar
e Workstation
KEEP_LICENSE
Specifies whether to keep or remove license keys when
Workstation Pro is uninstalled.
1
KEEP_SETTINGFILES
Specifies whether to keep or remove settings files when
Workstation Prois uninstalled
1
SERIALNUMBER
Lets you enter the license key when Workstation Pro is
installed. Enter the license key with hyphens, for example,
"xxxxx-xxxxx-xxxxx-xxxxx-xxxxx".
SOFTWAREUPDATEURL
Specifies a custom URL for managing software updates
(separate from vmware.com).
STARTMENU_SHORTCUT
Adds a Start menu item when Workstation Pro is installed.
SUPPORTURL
Set a support URL or email alias specifically for your users to
contact with product issues through the Workstation Pro or
Workstation Pro Help menu.
VMware, Inc.
1
25
Using VMware Workstation Pro
Install Workstation Pro on a Linux Host
You run the Linux bundle installer to install Workstation Pro on a Linux host system. On most Linux
distributions, the Linux bundle installer launches a GUI wizard. On some Linux distributions, including Red
Hat Enterprise Linux 5.1, the bundle installer launches a command-line wizard instead of a GUI wizard. You
can run the installer with the --console option to install Workstation Pro in a terminal window.
Remote connections and virtual machine sharing are enabled by default when you install Workstation Pro.
With remote connections, you can connect to remote hosts and run remote virtual machines. With virtual
machine sharing, you can create virtual machines that other instances of Workstation Pro can access
remotely.
Shared virtual machines are stored in the shared virtual machines directory, where VMware Workstation
Server (vmware-workstation-server) manages them. Remote users connect to VMware Workstation Server
through HTTPS port 443 on the host system.
To change the shared virtual machines directory or select a different port during the installation process, you
must specify the --custom option. You can also change the shared virtual machines directory, select a
different port, and disable remote connections and virtual machine sharing after Workstation Pro is installed
by modifying the Shared VMs Workstation Pro preference setting.
Prerequisites
n
Verify that the host system meets the host system requirements. See “Host System Requirements for
Workstation Pro,” on page 13.
n
Verify that no incompatible VMware products are installed on the host system. See “Installing
Workstation Pro with Other VMware Products,” on page 22.
n
Obtain the Workstation Pro software and license key. See “Obtaining the Workstation Pro Software and
License Key,” on page 21.
n
If you plan to use the Integrated Virtual Debugger for Eclipse, install it on the host system. See
“Installing the Integrated Virtual Debuggers for Eclipse,” on page 23.
n
Compile the real-time clock function into the Linux kernel.
n
Verify that the parallel port PC-style hardware option (CONFIG_PARPORT_PC) is built and loaded as a
kernel module and that it is set to m when the kernel is compiled.
n
Familiarize yourself with the Linux command-line installation options. You must use the --custom
option to specify certain configuration settings. See “Linux Command Line Installation Options,” on
page 27.
n
Verify that you have root access on the host system.
Procedure
1
Log in to the host system with the user name that you plan to use when you run Workstation Pro.
2
Become root.
For example: su root
The command that you use depends on your Linux distribution and configuration.
3
Change directories to the directory that contains the Workstation Pro installer file.
4
Run the appropriate Workstation Pro installer for the host system.
For example: sh VMware-Workstation-xxxx-xxxxxxx.architecture.bundle [--option]
xxxx-xxxxxxx is the version and build numbers, architecture is i386 or x86_64, and option is a command
line option.
26
VMware, Inc.
Chapter 3 Installing and Using Workstation Pro
5
Accept the Open Virtualization Format (OVF) Tool license agreement.
If you are using the --console option or installing Workstation Pro on a host system that does not
support the GUI wizard, press Enter to scroll through and read the license agreement or type q to skip
to the [yes/no] prompt.
6
Follow the prompts to finish the installation.
After Workstation Pro is installed, vmware-workstation-server starts on the host system. When
Workstation Pro starts, log in using your regular user name, not root. vmware-workstation-server starts
whenever you restart the host system.
Linux Command Line Installation Options
You can use command line installation options to install Workstation Pro on a Linux host system.
To use the installation options, you must be logged in as root. Exit from the root account after the
installation is finished.
Table 3‑2. Linux Command Line Installation Options
Option
Description
--console
Enables you to use the terminal for installation.
--custom
Use this option to customize the following installation settings.
n The locations of the installation directories.
n The user who will initially connect to VMware Workstation Server. This user
can create and manage shared virtual machines.
n The location of the shared virtual machines directory.
n The HTTPS port that VMware Workstation Server uses on the host system.
--gtk
Opens the GUI-based VMware installer, which is the default option.
--ignore-errors or -I
Allows the installation to continue even if there is an error in one of the installer
scripts. Because the section that has an error does not complete, the component
might not be properly configured
--regular
Shows installation questions that have not been answered before or are required.
This is the default option.
--required
Shows the license agreement only and then proceeds to install Workstation Pro.
--set-setting vmware-installer
installShortcuts yes | no
Adds shortcuts when Workstation Pro is installed. The default is yes.
--set-setting vmware-installer libdir
lib_path
The libdir parameter instructs the installer where to place product-specific data
files, such as libraries and internal icons. The installer places product files in
$libdir/vmware and $libdirvmware-installer. The default is /usr/lib.
--set-setting vmware-installer
prefix /usr/local
Installs executable files you run directly (ex: vmware, vmplayer, vmwarenetworks, etc.) here. Remainder of the product distributed under libdir-derived
paths. The default is /usr .
--set-setting vmware-workstation
serialNumber xxxxx-xxxxx-xxxxx-xxxxxxxxxx
--set-setting vmware-player
serialNumber xxxxx-xxxxx-xxxxx-xxxxxxxxxx
Lets you enter the license key when Workstation Pro or Workstation Player is
installed. Enter the license key with hyphens, for example, xxxxx-xxxxx-xxxxxxxxxx-xxxxx.
--set-setting vmware-player-app
simplifiedUI yes|no
Turn on or off certain UI features of Workstation Player. The default is no.
--set-setting vmware-workstation-app
softwareUpdateEnabled yes|no
--set-setting vmware-player-app
softwareUpdateEnabled yes|no
Enables automatic upgrades for Workstation Pro or Workstation Player when a
new build becomes available.
VMware, Inc.
27
Using VMware Workstation Pro
Table 3‑2. Linux Command Line Installation Options (Continued)
Option
Description
--set-setting vmware-workstation-app
softwareUpdateURL https://url/
--set-setting vmware-player-app
softwareUpdateURL https://url/
Specifies a custom URL for managing software updates (separate from
vmware.com).
--set-setting vmware-workstation-app
supportURL https://url/
--set-setting vmware-player-app
supportURL https://url/
Set a support URL or email alias specifically for your users to contact with
product issues through the Help menu.
Upgrading Workstation Pro
You can upgrade from a previous version of Workstation to the current version of Workstation Pro by
running the Workstation Pro installation program.
When you upgrade Workstation Pro, the installation program removes the previous version of
Workstation Pro before it installs the new version.
To use the latest features, virtual machines that were created in the previous versions of Workstation must
be upgraded to the current version of Workstation Pro.
n
Prepare for an Upgrade on page 28
You must perform certain steps before you upgrade Workstation Pro.
n
Upgrade Workstation Pro on a Windows Host on page 29
You can upgrade to the current version of Workstation Pro on a Windows host system by running the
Workstation Pro setup program and installation wizard for Windows.
n
Upgrade Workstation Pro on a Linux Host on page 30
You can upgrade to the current version of Workstation Pro on a Linux host system by running the
Linux bundle installer for Workstation Pro. On most Linux distributions, the Linux bundle installer
launches a GUI wizard. On some Linux distributions, including Red Hat Enterprise Linux 5.1, the
bundle installer launches a command-line wizard instead of a GUI wizard. You can run the installer
with the --console option to upgrade Workstation Pro in a terminal window.
n
Change the Hardware Compatibility of a Virtual Machine on page 31
You can change the hardware compatibility of a virtual machine. All virtual machines have a
hardware version. The hardware version indicates which virtual hardware features that the virtual
machine supports, such as BIOS or EFI, number of virtual slots, maximum number of CPUs,
maximum memory configuration, and other hardware characteristics.
Prepare for an Upgrade
You must perform certain steps before you upgrade Workstation Pro.
Procedure
n
Verify that all virtual machines are Workstation 7.x, 8, 9, 10 or 11 virtual machines.
Direct upgrades from Workstation 2 and 3 virtual machines are not supported .
28
n
Review the system requirements for the new version of Workstation Pro.
n
If a virtual machine was created with a version of Workstation earlier than Workstation 5.5 and it has a
snapshot, delete the snapshot.
VMware, Inc.
Chapter 3 Installing and Using Workstation Pro
n
If you are upgrading from Workstation 4, 5.x, 6.x, or 7.x, and the previous version of Workstation used
bridged settings to map virtual networks to specific physical or virtual adapters, record those settings.
You must recreate these mappings after you upgrade Workstation Pro.
n
Power off all running virtual machines in Workstation Pro.
n
If any virtual machines are suspended, resume them and power them off in Workstation Pro.
n
If any virtual machines are running in the background, start them in Workstation Pro and power them
off.
n
Back up all virtual machines by making backup copies of the files in the virtual machine directories and
storing them in different directories.
The files that you back up should include .vmdk or .dsk files, .vmx or .cfg files, and .nvram files.
Depending on the upgrade path, you might not be able to run virtual machines under both the current
version of Workstation Pro and the previous version.
n
If you are upgrading Workstation 6.x on Windows XP to the current version of Workstation Pro on
Windows Vista or Windows 7, verify that Service Pack 2 is installed and then upgrade the host
operating system to Windows Vista or Windows 7.
n
If you are upgrading Workstation 5.x on Windows Vista to the current version of Workstation Pro on
Windows Vista, select Programs > Programs and Features > Uninstall a program in the Windows
control panel to manually uninstall Workstation 5.x.
n
If you are upgrading Workstation 5.x on Windows XP to the current version of Workstation Pro on
Windows Vista or Windows 7, select Add or Remove Programs in the Windows control panel to
manually uninstall Workstation 5.x.
During an upgrade from Windows XP to Windows Vista or Windows 7, the location of virtual machines
might change. The Windows Vista and Windows 7 upgrade use the registry to map the virtual machines to a
new location. Before the upgrade, the default virtual machine location on Windows XP is
C:\Documents and Settings\username\My Documents\My Virtual Machines. After the upgrade, the default
virtual machine location on Windows Vista and Windows 7 is C:\Users\username\Documents\Virtual
Machines\guestOSname.
Upgrade Workstation Pro on a Windows Host
You can upgrade to the current version of Workstation Pro on a Windows host system by running the
Workstation Pro setup program and installation wizard for Windows.
Remote connections and virtual machine sharing are enabled by default when you upgrade
Workstation Pro. With remote connections, you can connect to remote hosts and run remote virtual
machines. With virtual machine sharing, you can create virtual machines that other instances of
Workstation Pro can access remotely.
Prerequisites
n
Verify that the host system meets the host system requirements. See “Host System Requirements for
Workstation Pro,” on page 13.
n
Verify that you have a license key.
n
Verify that you have administrative privileges on the host system.
n
Prepare for the upgrade. See “Prepare for an Upgrade,” on page 28.
VMware, Inc.
29
Using VMware Workstation Pro
Procedure
1
Log in to the Windows host system as the Administrator user or as a user who is a member of the local
Administrators group.
If you log in to a domain, the domain account must also be a local administrator.
2
Double-click the VMware-workstation-xxxx-xxxxxxx.exe file, where xxxx-xxxxxxx is the version and
build numbers.
3
Click Uninstall to uninstall the previous version of Workstation Pro.
4
After the host system restarts, log in as the Administrator user or as a user who is a member of the local
Administrators group.
If you log in to a domain, the domain account must also be a local administrator.
5
Follow the prompts to finish the upgrade.
Depending on your configuration, you might need to restart the host system to finish the installation.
After Workstation Pro is upgraded and you restart the host system, the VMware Workstation Server service
starts. The VMware Workstation Server service starts whenever you restart the host system.
What to do next
To use the latest features, upgrade existing virtual machines to the new version of Workstation Pro. See
“Change the Hardware Compatibility of a Virtual Machine,” on page 31.
If you used bridged settings to map virtual networks to specific physical or virtual adapters in the previous
version of Workstation Pro, recreate the mappings. If you created teams in the previous version of
Workstation, convert the teams to use them in the new version of Workstation Pro.
Upgrade Workstation Pro on a Linux Host
You can upgrade to the current version of Workstation Pro on a Linux host system by running the Linux
bundle installer for Workstation Pro. On most Linux distributions, the Linux bundle installer launches a GUI
wizard. On some Linux distributions, including Red Hat Enterprise Linux 5.1, the bundle installer launches
a command-line wizard instead of a GUI wizard. You can run the installer with the --console option to
upgrade Workstation Pro in a terminal window.
Remote connections and virtual machine sharing are enabled by default when you upgrade
Workstation Pro. With remote connections, you can connect to remote hosts and run remote virtual
machines. With virtual machine sharing, you can create virtual machines that other instances of
Workstation Pro can access remotely.
Shared virtual machines are stored in the shared virtual machines directory, where VMware Workstation
Server (vmware-workstation-server) manages them. Remote users connect to VMware Workstation Server
through HTTPS port 443 on the host system.
To change the shared virtual machines directory or select a different port during the upgrade process, you
must specify the --custom option. You can also change the shared virtual machines directory, select a
different port, and disable remote connections and virtual machine sharing after Workstation Pro is
upgraded by modifying the Shared VMs Workstation Pro preference setting.
Prerequisites
30
n
Verify that the host system meets the host system requirements. See “Host System Requirements for
Workstation Pro,” on page 13.
n
Verify that you have a license key.
n
Prepare for the upgrade. See “Prepare for an Upgrade,” on page 28.
VMware, Inc.
Chapter 3 Installing and Using Workstation Pro
n
Familiarize yourself with the Linux command-line installation options. You must use the --custom
option to specify certain configuration settings. See “Linux Command Line Installation Options,” on
page 27.
n
Verify that you have root access to the host system.
Procedure
1
Log in to the host system with the user name that you plan to use when you run Workstation Pro.
2
Become root.
For example: su root
The command that you use depends on your Linux distribution and configuration.
3
Change directories to the directory that contains the Workstation Pro installer file.
4
Run the appropriate Workstation Pro installer for the host system.
For example: sh VMware-Workstation-xxxx-xxxxxxx.architecture.bundle [--option]
xxxx-xxxxxxx is the version and build numbers, architecture is i386 or x86_64, and option is a command
line option.
5
Accept the Open Virtualization Format (OVF) Tool license agreement.
If you are using the --console option or installing Workstation Pro on a host system that does not
support the GUI wizard, press Enter to scroll through and read the license agreement or type q to skip
to the [yes/no] prompt.
6
Follow the prompts to finish the installation.
After Workstation Pro is upgraded, vmware-workstation-server starts on the host system. vmwareworkstation-server starts whenever you restart the host system.
What to do next
To use the latest features, upgrade existing virtual machines to the new version of Workstation Pro. See
“Change the Hardware Compatibility of a Virtual Machine,” on page 31.
If you used bridged settings to map virtual networks to specific physical or virtual adapters in the previous
version of Workstation Pro, recreate the mappings. If you created teams in the previous version of
Workstation, convert the teams to use them in the new version of Workstation Pro.
Change the Hardware Compatibility of a Virtual Machine
You can change the hardware compatibility of a virtual machine. All virtual machines have a hardware
version. The hardware version indicates which virtual hardware features that the virtual machine supports,
such as BIOS or EFI, number of virtual slots, maximum number of CPUs, maximum memory configuration,
and other hardware characteristics.
When you upgrade Workstation Pro, you must change the hardware compatibility of virtual machines that
were created in previous versions of Workstation Pro so that they can use the new features in the new
version of Workstation Pro. You can run older versions of virtual machines in the new version of
Workstation Pro, but you will not have the benefits of the new features.
If you want a virtual machine to remain compatible with other VMware products that you are using, you
might not want to change the hardware compatibility to the latest Workstation Pro version.
Note If you decide not to change the hardware compatibility of a virtual machine, you should consider
upgrading to the latest version of VMware Tools to obtain the latest VMware Tools features.
VMware, Inc.
31
Using VMware Workstation Pro
Prerequisites
Familiarize yourself with the considerations and limitations of changing the hardware compatibility of a
virtual machine. See “Considerations for Changing the Hardware Compatibility of a Virtual Machine,” on
page 32.
Procedure
1
Make backup copies of the virtual disk (.vmdk) files.
2
If you are upgrading from a Workstation 5.x virtual machine, or downgrading to a Workstation 5.x
virtual machine, make a note of the NIC settings in the guest operating system.
If you specified a static IP address for the virtual machine, that setting might be changed to automatic
assignment by DHCP after the upgrade.
3
Shut down the guest operating system and power off the virtual machine.
4
Select the virtual machine and select VM > Manage > Change Hardware Compatibility.
5
Follow the prompts in the wizard to change the hardware compatibility of the virtual machine.
When you select a hardware compatibility setting, a list of the VMware products that are compatible
with that setting appears. For example, if you select Workstation 4, 5, or 6, a list of Workstation 6.5 and
later features that are not supported for that Workstation version also appears.
Note Using Workstation 10, you can change the hardware compatibility of a shared or remote virtual
machine. However, you cannot down grade a previously created virtual machine.
6
Power on the virtual machine.
If you upgrade a virtual machine that contains a Windows 98 operating system to a Workstation 6.5 or
later virtual machine, you must install a PCI-PCI bridge driver when you power on the virtual machine.
Note Because Workstation 6.5 and later versions have 32 more PCI-PCI bridges than Workstation 6,
you might need to respond to the prompt 32 or 33 times.
7
If the NIC settings in the guest operating system have changed, use the NIC settings that you recorded
to change them back to their original settings.
8
If the virtual machine does not have the latest version of VMware Tools installed, update VMware
Tools.
You should update VMware Tools to the version included with the latest version of Workstation Pro,
even if you upgraded the virtual machine to an earlier version of Workstation Pro. Do not remove the
older version of VMware Tools before installing the new version.
Note If you are upgrading a virtual machine that runs from a physical disk, you can safely ignore this
message: Unable to upgrade drive_name. One of the supplied parameters is invalid.
Considerations for Changing the Hardware Compatibility of a Virtual Machine
Before you change the hardware compatibility of a virtual machine, you should be aware of certain
considerations and limitations.
32
n
For Workstation 5.x, 6, 6.5, 7.x, and later virtual machines, you can change the version of the original
virtual machine or create a full clone so that the original virtual machine remains unaltered.
n
If you upgrade a Workstation 5.x virtual machine that is compatible with ESX Server to Workstation 6,
6.5, 7.x, or later, you cannot use the Change Hardware Compatibility wizard to later downgrade the
virtual machine to an ESX-compatible virtual machine.
VMware, Inc.
Chapter 3 Installing and Using Workstation Pro
n
When you upgrade a Windows XP, Windows Server 2003, Windows Vista, Windows 7, or Windows 8
virtual machine, the Microsoft product activation feature might require you to reactivate the guest
operating system.
n
Using Workstation 9 or earlier, you cannot change the hardware compatibility of a shared or remote
virtual machine.
n
Using Workstation 10 and later, you can change the hardware compatibility of a shared or remote
virtual machine. However, you cannot down grade a previously created virtual machine.
Uninstalling Workstation Pro
You uninstall Workstation Pro on a Windows host by using the Windows setup program. On a Linux host,
you uninstall Workstation Pro by running the bundle installer.
Important If you uninstall Workstation Pro and do not save the configuration, then when you reinstall
Workstation Pro, shared virtual machines will no longer appear in the Shared VMs list in the virtual
machine library. To display virtual machines in the list again, you will need to share them again.
Uninstall Workstation Pro from a Windows Host
You can run the Windows setup program to uninstall Workstation Pro from a Windows host system.
Procedure
1
Log in to the Windows host system as the Administrator user or as a user who is a member of the local
Administrators group.
If you log in to the domain, the domain account must also be a local administrator.
2
Double-click the VMware-workstation-xxxx-xxxxxxx.exe file, where xxxx-xxxxxxx is the version and
build numbers.
3
Click Next on the Welcome screen and then click Remove.
4
(Optional) To save product license and Workstation Pro configuration information, select the
appropriate check boxes.
5
Click Next to begin uninstalling Workstation Pro.
Uninstall Workstation Pro from a Linux Host
You must run a command to uninstall Workstation Pro from a Linux host.
Prerequisites
Verify that you have root access to the host system.
Procedure
1
Log in to the Linux host system with the user name that you use when you run Workstation Pro.
2
Become root.
For example: su root
The command that you use depends on your Linux distribution and configuration.
3
In a terminal window, type vmware-installer -u vmware-workstation
4
Click Next to begin uninstalling Workstation Pro.
VMware, Inc.
33
Using VMware Workstation Pro
Start Workstation Pro
How you start Workstation Pro depends on the host system platform and the options that you selected
during Workstation Pro installation.
On Windows host systems, you might have a desktop shortcut, a quick launch shortcut, or a combination of
these options in addition to a Start menu item.
On Linux host systems, you start Workstation Pro from the command line. On some Linux distributions,
including Red Hat Enterprise Linux 5.1, you can also start Workstation Pro from the System Tools menu
under Applications.
Procedure
n
To start Workstation Pro on a Windows host system, select Start > Programs > VMware > VMware
Workstation.
n
To start Workstation Pro on a Linux host system, type the vmware command in a terminal window.
Option
Command
/usr/bin is in your default path
vmware &
/usr/bin is not in your default path
/usr/bin/vmware &
The first time you start Workstation Pro, Workstation Pro prompts you to accept the End User License
Agreement. After you start Workstation Pro, the Workstation Pro window opens.
Using the Workstation Pro Window
A virtual machine is like a separate computer that runs in a window on the host system. Workstation Pro
displays more than the screen of another computer. From the Workstation Pro window, you can interact
with and run virtual machines. You can also switch easily from one virtual machine to another.
The best way to learn how to use Workstation Pro is to use it. The Workstation Pro window is designed to be
intuitive and easy to use.
n
Use Virtual Machines in the Workstation Pro Window on page 35
You interact with virtual machines through the Workstation Pro window.
n
Use the Virtual Machine Library on page 35
The virtual machine library appears on the left side of the Workstation Pro window. You use the
library to view and select virtual machines, folders, and remote hosts in Workstation Pro. The library
appears by default.
n
Use the Thumbnail Bar on page 36
The thumbnail bar appears along the bottom of the Workstation Pro window.
n
Use the Status Bar on page 36
The status bar appears at the bottom of the Workstation Pro window. You can use the icons on the
status bar to see Workstation Pro messages and perform actions on devices such as hard disks,
CD/DVD drives, floppy drives, and network adapters. The status bar appears by default.
n
Use Workstation Pro Tabs on page 37
Workstation Pro creates a tab in the right pane of the Workstation Pro window when you select an
item in the library. Tabs appear by default.
34
VMware, Inc.
Chapter 3 Installing and Using Workstation Pro
n
Customize the Workstation Pro Window on page 37
You can customize the appearance of the Workstation Pro window by selecting items from the View
menu.
n
Default Hot-Key Combinations on page 38
You can use keyboard shortcuts to interact with Workstation Pro and with virtual machines. Most of
the available keyboard shortcuts for Workstation Pro are listed next to their associated commands in
Workstation Pro menus.
Use Virtual Machines in the Workstation Pro Window
You interact with virtual machines through the Workstation Pro window.
Procedure
n
Use the icons on the Home tab to create a new virtual machine, open an existing virtual machine,
connect to a remote server, or view the Workstation Pro help system.
n
Select a powered-off virtual machine in the library or click its tab to see the summary view for that
virtual machine.
The summary view shows a summary of configuration information and the virtual machine state. You
can power on the virtual machine and edit virtual machine settings from the summary view.
n
Select an active virtual machine in the library or click its tab to see the console view.
The console view is like the monitor display of a physical computer. You can click the console view
button on the toolbar to switch between the console and summary views.
n
Select a virtual machine in the library and use the VM menu on the menu bar at the top of the
Workstation Pro window to perform all virtual machine operations for the selected virtual machine.
You can use the VM menu when a virtual machine is powered on or off. If an operation is not
supported for the virtual machine in its current state, the menu item is not available.
n
Select a virtual machine in the library and use the buttons on the toolbar at the top of the
Workstation Pro window to perform common virtual machine operations and change the display for
the selected virtual machine.
You can use the buttons on the toolbar to take and manage snapshots, enter full screen and Unity mode,
cycle multiple monitors, and switch between the console and summary views.
n
When a virtual machine is powered on, use the icons on the status bar at the bottom of
theWorkstation Pro window to see Workstation Pro messages and perform actions on virtual devices
such as hard disks, CD/DVD drives, floppy drives, and network adapters.
You can click or right-click on a removable device icon to connect or disconnect the device or edit its
settings, and you can click the Message log icon to view the message log. Messages include warning
information about the virtual machine. If the icon is dimmed, all messages have already been read.
n
Select items in the library or use tabs to quickly switch between virtual machines, folders, and remote
hosts.
Use the Virtual Machine Library
The virtual machine library appears on the left side of the Workstation Pro window. You use the library to
view and select virtual machines, folders, and remote hosts in Workstation Pro. The library appears by
default.
Prerequisites
If the library is not visible, select View > Customize > Library.
VMware, Inc.
35
Using VMware Workstation Pro
Procedure
n
Right-click a virtual machine, folder, or remote host in the library to view the item's context menu and
perform common operations.
n
To find a specific virtual machine in the library, type its name, part of its description, or the name of the
guest operating system in the search box.
For example, to find all of the virtual machines that have a Windows 8 guest operating system, type
Windows 8. You can also search for folders and remote hosts.
n
To mark a virtual machine or folder as a favorite in the library, right-click it and select Mark as Favorite
or click the star icon.
n
Use the library drop-down menu to show only powered on virtual machines or favorite items.
By default, the library shows all items.
n
To remove an item from the library, right-click it and select Remove.
Use the Thumbnail Bar
The thumbnail bar appears along the bottom of the Workstation Pro window.
For active virtual machines, Workstation Pro updates the thumbnail in real time to show the actual content
of the virtual machine. When a virtual machine is suspended, the thumbnail is a screenshot of the virtual
machine at the time that it was suspended.
Prerequisites
If the thumbnail bar is not visible, select View > Customize > Thumbnail Bar.
Procedure
n
Click a thumbnail to show the summary or console view for a virtual machine.
n
Click thumbnails to quickly switch between virtual machines.
n
To change the order of the thumbnails, change the order of the virtual machine tabs.
Thumbnails appear in the same order as the virtual machine tabs. To move a virtual machine tab, drag
and drop it to a new location.
n
To change the virtual machines that appear in the thumbnail bar, select Open Virtual Machines or
Folder View Virtual Machines from the thumbnail bar drop-down menu.
The drop-down menu is a down-arrow on the thumbnail bar.
Use the Status Bar
The status bar appears at the bottom of the Workstation Pro window. You can use the icons on the status bar
to see Workstation Pro messages and perform actions on devices such as hard disks, CD/DVD drives, floppy
drives, and network adapters. The status bar appears by default.
Procedure
n
Mouse over an icon on the status bar to see its name.
n
Click or right-click on a removable device icon to connect or disconnect the device or edit its settings.
n
Click the message log icon to view the message log.
Messages include warning information about the virtual machine. If the icon is dimmed, all messages
have already been read.
36
VMware, Inc.
Chapter 3 Installing and Using Workstation Pro
Use Workstation Pro Tabs
Workstation Pro creates a tab in the right pane of the Workstation Pro window when you select an item in
the library. Tabs appear by default.
Procedure
n
Use the links on the Home tab to create a virtual machine, open a virtual machine, connect to a remote
server, virtualize a physical machine, use the virtual network editor, customize Workstation Pro
preferences, download software updates, and view the help system.
n
Use the virtual machine tabs to view virtual machine configuration information, modify virtual
machine hardware and option settings, and create or modify the virtual machine description.
n
Use the Shared VMs tab to see information about all of the shared virtual machines on the host system.
n
Use the tab for a remote host to see information about the remote host, including CPU, memory, and
disk usage, and the virtual machines and virtual machine tasks running on the remote host.
n
Select File > Close Tab to close a tab.
Customize the Workstation Pro Window
You can customize the appearance of the Workstation Pro window by selecting items from the View menu.
Procedure
1
2
VMware, Inc.
Select View > Customize and select a Workstation Pro window view.
Option
Description
Library
The virtual machine library appears in the left side of the window. You can
use the library to view and select virtual machines, folders, and remote
hosts in Workstation Pro. The library appears by default.
Thumbnail Bar
A thumbnail bar appears at the bottom of the window. Depending on the
thumbnail bar option that is selected, the thumbnail bar shows all open
virtual machines or the virtual machines in the selected folder.
Toolbar
A toolbar appears at the top of the window. You can use the icons on the
toolbar to start and stop virtual machines, take snapshots, change the
display, and perform other common tasks. The toolbar appears by default.
Status Bar
A status bar appears at the bottom of the window when a virtual machine
is selected. You can use the icons on the status bar to see Workstation Pro
messages and perform actions on virtual machine devices such as hard
disks, CD/DVD drives, floppy drives, and network adapters. The status bar
appears by default.
Tabs
Workstation Pro creates a tab in the right pane when you select an item in
the library. Tabs appear by default.
To specify which virtual machines appear in the thumbnail bar, select View > Customize > Thumbnail
Bar Options.
Option
Description
Open Virtual Machines
The thumbnail bar shows thumbnails for all open virtual machines.
Folder View Virtual Machines
The thumbnail bar shows thumbnails for virtual machines in the selected
folder.
37
Using VMware Workstation Pro
Default Hot-Key Combinations
You can use keyboard shortcuts to interact with Workstation Pro and with virtual machines. Most of the
available keyboard shortcuts for Workstation Pro are listed next to their associated commands in
Workstation Pro menus.
Table 3‑3. Default Hot-Key Combinations
Shortcut
Action
Ctrl+G
Grab input from the keyboard and mouse.
Ctrl+Alt
Release the mouse cursor.
Ctrl+Alt+Insert
Shut down or, depending on the guest operating system, log out of the guest operating
system. This command is received solely by the virtual machine.
Ctrl+Alt+Delete
Shut down or, depending on the operating system, log out of the guest operating system.
On a Windows host, if you do not use the enhanced virtual keyboard feature, both the host
operating system and the virtual machine receive this command, even when Workstation Pro
has control of input. Cancel the ending of the host operating system session and return to the
virtual machine to log out or shut down or perform administrative tasks.
Ctrl+Alt+Enter
Enter full screen mode.
Ctrl+Alt+spacebar
Send any command to the virtual machine so that Workstation Pro does not process it. Hold
down Ctrl+Alt as you press and release the spacebar, and continue to hold the Ctrl+Alt keys
down as you press the next key in the combination.
Ctrl+Tab
Ctrl+Shift+Tab
(Windows hosts only) Switch among tabs.
Ctrl+Alt+right arrow
In full screen mode, switch to the next powered-on virtual machine.
Ctrl+Alt+left arrow
In full screen mode, switch to the previous powered-on virtual machine.
Ctrl+Shift+U
In Unity mode, give access to the virtual machine Start or Applications menu.
You can change the Unity hot-key combination by modifying Unity preference settings.
You can change the default hot-key combinations by modifying Workstation Pro for common virtual
machine operations to Ctrl+Shift, you press Ctrl+Shift instead of Ctrl+Alt to release control from the current
virtual machine.
Using the Workstation Pro Online Help
The Workstation Pro online help contains information about Workstation Pro settings and common tasks.
Use the online help when you need to quickly find information about Workstation Pro preferences, virtual
hardware settings, and virtual machine options.
For example, if you are configuring a virtual machine and you need information about a specific hardware
setting, click Help on the dialog box that contains the setting. The Help window opens and a contextsensitive help topic appears in the right pane. To see the entire help system, select Help > Help Topics
(Windows host) or Help > Contents (Linux host).
38
VMware, Inc.
Creating Virtual Machines
4
You can create a new virtual machine in Workstation Pro by using the New Virtual Machine wizard, clone
an existing Workstation Pro virtual machine or virtual machine template, import third-party and Open
Virtualization Format (OVF) virtual machines, and create a virtual machine from a physical machine.
You can also create shared virtual machines, which can be used by remote users, and virtual machines that
run on remote hosts. See Chapter 10, “Using Remote Connections and Sharing Virtual Machines,” on
page 211.
This chapter includes the following topics:
n
“Understanding Virtual Machines,” on page 39
n
“Preparing to Create a New Virtual Machine,” on page 40
n
“Create a New Virtual Machine on the Local Host,” on page 50
n
“Cloning Virtual Machines,” on page 54
n
“Virtualize a Physical Machine,” on page 57
n
“Importing Virtual Machines,” on page 59
n
“Installing and Upgrading VMware Tools,” on page 60
n
“Virtual Machine Files,” on page 71
Understanding Virtual Machines
A virtual machine is a software computer that, like a physical machine, runs an operating system and
applications. A virtual machine uses the physical resources of the physical machine on which it runs, which
is called the host system. Virtual machines have virtual devices that provide the same functionality as
physical hardware, but with the additional benefits of portability, manageability, and security.
A virtual machine has an operating system and virtual resources that you manage in much the same way
that you manage a physical computer. For example, you install an operating system in a virtual machine in
the same way that you install an operating system on a physical computer. You must have a CD-ROM, DVD,
or ISO image that contains the installation files from an operating system vendor.
VMware, Inc.
39
Using VMware Workstation Pro
Preparing to Create a New Virtual Machine
You use the New Virtual Machine wizard to create a new virtual machine in Workstation Pro. The wizard
prompts you to make decisions about many aspects of the virtual machine. You should make these decisions
before you start the New Virtual Machine wizard.
Worksheet for Creating a Virtual Machine
You can print this worksheet and write down the values to specify when you run the New Virtual Machine
wizard.
Table 4‑1. Worksheet: Creating a Virtual Machine
Option
Fill In Your Value Here
Hardware compatibility setting
Guest operating system source
Guest operating system type (for manual installation)
Easy Install information for Windows guests
n Product key
n Operating system version
n Full name
n Password
n Credentials for automatic login
Easy Install information for Linux guests
Full name
n User name
n Password
n
Virtual machine name
Virtual machine location
Number of processors
Memory allocation
Network connection type
I/O controller type
Hard disk
Virtual hard disk type
Disk capacity
Virtual disk file name and location
Selecting a Virtual Machine Configuration
When you start the New Virtual Machine wizard, the wizard prompts you to select a typical or custom
configuration.
Typical Configuration
If you select a typical configuration, you must specify or accept defaults for a few basic virtual machine
settings.
40
n
How you want to install the guest operating system.
n
A name for the virtual machine and a location for the virtual machine files.
VMware, Inc.
Chapter 4 Creating Virtual Machines
n
The size of the virtual disk and whether to split the disk into multiple virtual disk files.
n
Whether to customize specific hardware settings, including memory allocation, number of virtual
processors, and network connection type.
Custom Configuration
You must select a custom configuration if you need to perform any of the following hardware
customizations.
n
Create a virtual machine that has a different Workstation Pro version than the default hardware
compatibility setting.
n
Select the I/O controller type for the SCSI controller.
n
Select the virtual disk device type.
n
Configure a physical disk or an existing virtual disk instead of create a new virtual disk.
n
Allocate all virtual disk space rather than let disk space gradually grow to the maximum disk size.
Selecting the Virtual Machine Hardware Compatibility Setting
All virtual machines have a hardware version. The hardware version indicates which virtual hardware
features that the virtual machine supports, such as BIOS or EFI, number of virtual slots, maximum number
of CPUs, maximum memory configuration, and other hardware characteristics. The virtual machine
hardware compatibility setting determines the hardware features of the virtual machine.
If you select a typical configuration, the wizard uses the default hardware compatibility setting configured
in the Workstation Pro preferences. By default, the default hardware compatibility setting is the installed
Workstation Pro version.
If you select a custom configuration, the New Virtual Machine wizard prompts you to select a hardware
compatibility setting for the virtual machine. When you select a hardware compatibility setting, a list of the
VMware products and versions that are compatible with your selection appears. Limitations and features
that are not available for your selection are also listed. If a feature compatibility check box is available for
your selection, you can select that check box to see a list of the additional limitations.
To deploy virtual machines to run on a different VMware product, you might need to select a hardware
compatibility setting that is compatible with that product.
Selecting a Guest Operating System
The New Virtual Machine prompts you to select the source media for the operating system that will run
inside the virtual machine. You can specify an installer disc inserted in a physical drive, an ISO image file, or
you can instruct the New Virtual Machine wizard to create a virtual machine that has a blank hard disk.
If you select an installer disc or an ISO image file and the operating system supports Easy Install, the guest
operating system installation is automated and VMware Tools is installed. If the installer disc or ISO image
file contains a product key number and is already set up to perform an unattended installation, the only
benefit of using Easy Install is the automatic installation of VMware Tools.
Note For remote virtual machines, you must specify whether the physical drive or ISO image file is located
on the local host or remote host before you select the installer disc or ISO image file.
If you instruct the New Virtual Machine wizard to create a virtual machine that has a blank hard disk, the
wizard prompts you to specify an operating system and version and you must install the guest operating
system manually after the virtual machine is created. Workstation Pro uses this information to set the
appropriate default values, name files associated with the virtual machine, adjust performance settings, and
work around special behaviors and bugs in the guest operating system. If the operating system you plan to
install is not listed in the wizard, select Other for both the operating system and version.
VMware, Inc.
41
Using VMware Workstation Pro
If you are installing an operating system that supports Easy Install but you do not want to use Easy Install,
you can instruct the wizard to create a virtual machine that has a blank disk and install the guest operating
system manually.
Providing Easy Install Information
When the New Virtual Wizard detects an operating system that supports Easy Install, the wizard prompts
you for information about the guest operating system. After the virtual machine is created, the guest
operating system installation is automated and VMware Tools is installed.
For Windows guest operating systems, you must provide the following Easy Install information.
Table 4‑2. Easy Install Information for Windows Guests
Easy Install Prompt
Description
Windows product key
(Optional) Type a product key unless the installation media contains a volume
license product key. If you provide a product key here, you are not prompted to
provide a product key when you install the guest operating system.
Version of Windows to install
Select the Windows operating system edition to install.
Full name
The name to use to register the guest operating system. Do not use the name
Administrator or Guest. If you use one of these names, you must enter a
different name when you install the guest operating system.
Password
(Optional) The password to use for an account with Administrator permissions
on Windows operating systems other than Windows 2000. On Windows 2000,
this is the password for the Administrator account. On Windows XP Home, an
Administrator account without a password is created and you are automatically
logged in to the guest operating system.
Log on automatically (requires a
password)
(Optional) Save your login credentials and bypass the login dialog box when you
power on the virtual machine. You must enter a name and password to use this
feature.
For Linux guest operating systems, you must provide the following Easy Install information.
Table 4‑3. Easy Install Information for Linux Guests
Prompt
Description
Full name
The name to use to register the guest operating system, if registration is
required. Workstation Pro uses the first name to create the host name for the
virtual machine.
User name
Your user name. You can use lowercase letters, numbers, and dashes, but avoid
using user names that begin with a dash. Do not use the name root. Some
operating systems set up sudo access for this user and other operating systems
require this user to use su to obtain root privileges.
Password
The password for the User name and the root user.
See “Use Easy Install to Install a Guest Operating System,” on page 51.
Specifying the Virtual Machine Name and File Location
The New Virtual Machine wizard prompts you for a virtual machine name and a directory for the virtual
machine files.
The name of the default directory for virtual machine files is derived from the name of the guest operating
system, for example, Microsoft Windows 10 x64.
42
VMware, Inc.
Chapter 4 Creating Virtual Machines
For standard virtual machines, the default directory for virtual machine files is located in the virtual
machine directory. For best performance, do not place the virtual machines directory on a network drive. If
other users need to access the virtual machine, consider placing the virtual machine files in a location that is
accessible to those users.
For shared virtual machines, the default directory for virtual machine files is located in the shared virtual
machines directory. Shared virtual machine files must reside in the shared virtual machines directory.
Virtual Machines Directory
Workstation Pro stores standard virtual machines in the virtual machines directory.
The default location of the virtual machines directory depends on the host operating system.
Table 4‑4. Default Virtual Machines Directory
Host Operating System
Default Location
Windows Server 2008 R2
Windows Server 2012 R2
C:\Documents and Settings\username\My
Documents\My Virtual Machines
username is the name of the currently logged-in user.
Windows 7
Windows 8
Windows 10
C:\Users\ username \Documents\Virtual Machines
username is the name of the currently logged in user.
Linux
homedir/vmware
homedir is the home directory of the currently logged in
logged in user.
Shared Virtual Machines Directory
Workstation Pro stores shared virtual machines in the shared virtual machines directory, where VMware
Workstation Server manages them.
The default location of the shared virtual machines directory depends on the host operating system.
Table 4‑5. Default Shared Virtual Machines Directory
Host Operating System
Default Shared Virtual Machines Directory
Windows Server 2008 R2, Windows Server
2012 R2
C:\Documents and Settings\All Users\Documents\Shared
Virtual Machines
Windows 7
Windows 8
Windows 10
C:\Users\Public\Documents\Shared Virtual Machines
Linux
/var/lib/vmware/Shared VMs
Selecting the Firmware Type
Depending on the guest operating system, when you use a custom configuration, the New Virtual Machine
wizard prompts you to select the firmware type the virtual machine uses when it boots.
This option is only available in the New Virtual Machine wizard when selecting Windows 7 and later 64-bit
guest operating systems.
VMware, Inc.
43
Using VMware Workstation Pro
Table 4‑6. Firmware Type Options
Option
Description
BIOS
The virtual machine firmware uses BIOS when booting.
EFI
The virtual machine uses EFI when booting. See “Enable
EFI Support,” on page 76.
See also “Configuring Advanced Settings for a Virtual Machine,” on page 257.
Selecting the Number of Processors for a Virtual Machine
When you select a custom configuration, the New Virtual Machine wizard prompts you to specify the
number of processors for the virtual machine.
Specifying multiple virtual processors is supported only on host machines that have at least two logical
processors. Single-processor hosts that have hyperthreading enabled or dual-core CPUs are considered to
have two logical processors. Multiprocessor hosts that have two CPUs are considered to have at least two
logical processors, regardless of whether they are dual-core or have hyperthreading enabled.
For Windows virtual machines running mostly office and Internet productivity applications, using multiple
virtual processors is not beneficial, so the default single virtual processor is ideal. For server workloads and
data-intensive computing applications, adding extra virtual processors may provide an increase in
application performance.
Application
Recommended number of processors
Desktop applications
1 processor
Server operating systems
2 processors
Video encoding, modeling, and scientific
4 processors
In some circumstances, adding additional processors can decrease the overall perfomance of the virtual
machine and your computer. This can occur if the operating system or application is not using the
processors efficiently. In this case, reducing the number of processors is recommended.
Assigning all processors on your computer to the virtual machine results in extremely poor performance.
The host operating system must continue to perform background tasks even if no applications are running.
If you assign all processors to a virtual machine, this prevents important tasks from being completed.
Allocating Memory for a Virtual Machine
When you select a custom configuration, the New Virtual Machine wizard prompts you to specify the
default settings for memory allocation.
Color-coded icons correspond to the maximum recommended memory, recommended memory, and guest
operating system recommended minimum memory values. To adjust the memory allocated to the virtual
machine, move the slider along the range of values. The high end of the range is determined by the amount
of memory allocated to all running virtual machines. If you allow virtual machine memory to be swapped,
this value changes to reflect the specified amount of swapping.
On 64-bit hosts, the maximum amount of memory for each virtual machine is 64GB. On 32-bit hosts, the
maximum amount of memory for each virtual machine is 8GB. You cannot power on virtual machines that
are configured to use more than 8GB of memory on 32-bit hosts. Memory management limitations on 32-bit
operating systems cause virtual machine memory to overcommit, which severely affects system
performance.
44
VMware, Inc.
Chapter 4 Creating Virtual Machines
The total amount of memory that you can assign to all virtual machines running on a single host machine is
limited only by the amount of RAM on the host machine.
You can change the amount of memory available to all virtual machines by modifying Workstation Pro
memory settings.
Selecting the Network Connection Type for a Virtual Machine
When you select a custom configuration, the New Virtual Machine wizard prompts you to configure the
network connection type for the virtual machine.
If you are creating a remote virtual machine, you must select either a custom network or no network
connection.
Table 4‑7. Network Connection Settings
Setting
Description
Use bridged networking
Configure a bridged network connection for the virtual machine. With bridged
networking, the virtual machine has direct access to an external Ethernet network.
The virtual machine must have its own IP address on the external network.
If your host system is on a network and you have a separate IP address for your
virtual machine (or can get an IP address from a DHCP server), select this setting.
Other computers on the network can then communicate directly with the virtual
machine.
Use network address translation
(NAT)
Configure a NAT connection for the virtual machine. With NAT, the virtual machine
and the host system share a single network identity that is not visible outside the
network.
Select NAT if you do not have a separate IP address for the virtual machine, but you
want to be able to connect to the Internet.
Use host-only networking
Configure a host-only network connection for the virtual machine. Host-only
networking provides a network connection between the virtual machine and the
host system, using a virtual network adapter that is visible to the host operating
system.
With host-only networking, the virtual machine can communicate only with the
host system and other virtual machines in the host-only network. Select host-only
networking to set up an isolated virtual network.
Do not use a network connection
Do not configure a network connection for the virtual machine.
Custom (Windows host) or
Named Network (Linux host)
(Remote virtual machine only) Select a specific virtual network.
See Chapter 9, “Configuring Network Connections,” on page 175 for information about virtual switches,
virtual network adapters, the virtual DHCP server, and the NAT device.
Selecting the I/O Controller Type for a Virtual Machine
When you select a custom configuration, the New Virtual Machine wizard prompts you to select the I/O
controller type for the virtual machine.
Workstation Pro installs an IDE controller and a SCSI controller in the virtual machine. SATA controllers are
supported for some guest operating systems. The IDE controller is always ATAPI. For the SCSI controller,
you can choose BusLogic, LSI Logic, or LSI Logic SAS. If you are creating a remote virtual machine on an
ESX host, you can also select a VMware Paravirtual SCSI (PVSCSI) adapter.
BusLogic and LSI Logic adapters have parallel interfaces. The LSI Logic SAS adapter has a serial interface.
The LSI Logic adapter has improved performance and works better with generic SCSI devices. The LSI Logic
adapter is also supported by ESX Server 2.0 and later.
VMware, Inc.
45
Using VMware Workstation Pro
PVSCSI adapters are high-performance storage adapters that can provide greater throughput and lower
CPU utilization. They are best suited for environments where hardware or applications drive a very high
amount of I/O throughput, such as SAN environments. PVSCSI adapters are not suited for DAS
environments.
Note The choice of SCSI controller does not affect whether the virtual disk can be an IDE, SCSI, or SATA
disk.
Some guest operating systems, such as Windows XP, do not include a driver for the LSI Logic or LSI Logic
SAS adapter. You must download the driver from the LSI Logic Web site. Drivers for a Mylex (BusLogic)
compatible host bus adapter are not obvious on the LSI Logic Web site. Search the support area for the
numeric string in the model number, for example, search for 958 for BT/KT-958 drivers.
See the VMware Guest Operating System Installation Guide for driver support information. For guest operating
system support information and known issues, as well as SATA support, see the online Compatibility Guide
on the VMware Web site.
Selecting a Hard Disk for a Virtual Machine
When you select a custom configuration, the New Virtual Machine wizard prompts you to configure a hard
disk for the virtual machine.
Virtual hard disks are the best choice for most virtual machines because they are easy to set up and can be
moved to new locations on the same host system or to different host systems. In a typical configuration,
Workstation Pro creates a new virtual hard disk for the virtual machine.
In some cases, you might want to select an existing virtual hard disk or give the virtual machine access to a
physical hard disk or unused partition on the host system.
n
Selecting the Virtual Hard Disk Type for a Virtual Machine on page 47
If you instruct the New Virtual Machine wizard to create a new virtual disk during a custom
configuration, the wizard prompts you to select the virtual hard disk type for the virtual machine.
n
Selecting the Disk Mode on page 47
When you select a custom configuration on a Linux host, you can use the New Virtual Machine wizard
to configure normal or independent mode for a disk.
n
Prepare to Use a Physical Disk or Unused Partition on page 47
You must perform certain tasks before you configure a virtual machine to use a physical disk or
unused partition on the host system.
n
Specifying Disk Capacity for a Virtual Machine on page 48
If you instruct the New Virtual Machine wizard to create a new virtual disk during a custom
configuration, the wizard prompts you to set the size of the virtual disk and specify whether to split
the disk into multiple virtual disk (.vmdk) files.
n
Specifying the Name and Location of Virtual Disk Files on page 49
During a custom configuration, if you instruct the New Virtual Machine wizard to create a new virtual
disk, use an existing virtual disk, or use a physical disk, the wizard prompts you for the name and
location of a virtual disk (.vmdk) file.
46
VMware, Inc.
Chapter 4 Creating Virtual Machines
Selecting the Virtual Hard Disk Type for a Virtual Machine
If you instruct the New Virtual Machine wizard to create a new virtual disk during a custom configuration,
the wizard prompts you to select the virtual hard disk type for the virtual machine.
You can set up a virtual disk as an IDE disk for any guest operating system. You can set up a virtual disk as
a SCSI disk for any guest operating system that has a driver for the LSI Logic or BusLogic SCSI controller
available in the virtual machine. You can set up a virtual disk as SATA for some guest operating systems.
You can change virtual disk node and mode settings after a virtual machine is created.
Selecting the Disk Mode
When you select a custom configuration on a Linux host, you can use the New Virtual Machine wizard to
configure normal or independent mode for a disk.
In normal mode, disks are included in snapshots that you take of the virtual machine. If you do not want
data on the disk to be recorded when you take a snapshot of the virtual machine, configure the disk to be
independent.
If you configure a disk to be independent, you can further specify whether changes you make to the disk are
to persist or be discarded when you power off the virtual machine or restore a snapshot.
You can also exclude virtual disks from snapshots by modifying virtual machine settings.
Prepare to Use a Physical Disk or Unused Partition
You must perform certain tasks before you configure a virtual machine to use a physical disk or unused
partition on the host system.
You must perform these tasks before you run the New Virtual Machine wizard to add a physical disk to a
new virtual machine, and before you add a physical disk to an existing virtual machine.
Procedure
1
If a partition is mounted by the host or in use by another virtual machine, unmount it.
The virtual machine and guest operating system access a physical disk partition while the host
continues to run its operating system. Corruption is possible if you allow the virtual machine to modify
a partition that is simultaneously mounted on the host operating system.
Option
Description
The partition is mapped to a
Windows Server 2008 R2 or
Windows Server 2012 R2 host
a
b
c
The partition is mapped to a
Windows 7, Windows 8, or Windows
10 host
a
b
c
d
e
VMware, Inc.
Select Start > Settings > Control Panel > Administrative Tools >
Computer Management > Storage > Disk Management.
Select a partition and select Action > All Tasks > Change Drive Letter
and Paths.
Click Remove.
Select Start > Control Panel.
In the menu bar, click the arrow next to Control Panel.
From the drop-down menu, select All Control Panel Items >
Administrative Tools > Computer Management > Storage > Disk
Management (Local).
Right-click a partition and choose Change Drive Letter and Paths.
Click Remove and OK.
47
Using VMware Workstation Pro
2
Check the guest operating system documentation regarding the type of partition on which the guest
operating system can be installed.
On Windows 7 hosts, you cannot use the system partition, or the physical disk that contains it, in a
virtual machine. Other operating systems, such as Linux, can be installed on a primary or an extended
partition on any part of the drive.
3
If the physical partition or disk contains data that you need in the future, back up the data.
4
If you use a Windows host IDE disk in a physical disk configuration, verify that it is not configured as
the slave on the secondary IDE channel if the master on that channel is a CD-ROM drive.
5
On a Linux host, set the device group membership or device ownership appropriately.
a
Verify that the master physical disk device or devices are readable and writable by the user who
runs Workstation Pro.
Physical devices, such as /dev/hda (IDE physical disk) and /dev/sdb (SCSI physical disk), belong to
group-id disk on most distributions. If this is the case, you can add Workstation Pro users to the
disk group. Another option is to change the owner of the device. Consider all the security issues
involved in this option.
b
Grant Workstation Pro users access to all /dev/hd[abcd] physical devices that contain operating
systems or boot managers.
When permissions are set correctly, the physical disk configuration files in Workstation Pro control
access. This reliability provides boot managers access to configuration files and other files they
might need to boot operating systems. For example, LILO needs to read /boot on a Linux partition
to boot a non-Linux operating system that might be on another drive.
Specifying Disk Capacity for a Virtual Machine
If you instruct the New Virtual Machine wizard to create a new virtual disk during a custom configuration,
the wizard prompts you to set the size of the virtual disk and specify whether to split the disk into multiple
virtual disk (.vmdk) files.
A virtual disk is made up of one or more virtual disk files. Virtual disk files store the contents of the virtual
machine hard disk drive. Almost all of the file content is virtual machine data. A small portion of the file is
allotted to virtual machine overhead. If the virtual machine is connected directly to a physical disk, the
virtual disk file stores information about the partitions that the virtual machine is allowed to access.
You can set a size between 0.001 GB and 8 TB for a virtual disk file. You can also select whether to store a
virtual disk as a single file or split it into multiple files.
Select Split virtual disk into multiple files if the virtual disk is stored on a file system that has a file size
limitation. When you split a virtual disk less than 950 GB, a series of 2-GB virtual disk files are created.
When you split a virtual disk greater than 950 GB, two virtual disk files are created. The maximum size of
the first virtual disk file is 1.9 TB and the second virtual disk file stores the rest of the data.
For custom configurations, you can select Allocate all disk space now to allocate all disk space immediately
rather than allow the disk space to gradually grow to the maximum amount. Allocating all the disk space
immediately might provide better performance, but it is a time-consuming operation that requires as much
physical disk space as you specify for the virtual disk. If you allocate all the disk space immediately, you
cannot use the shrink disk feature.
After you create a virtual machine, you can edit virtual disk settings and add additional virtual disks.
48
VMware, Inc.
Chapter 4 Creating Virtual Machines
Disk Size Compatibility
The size of a virtual disk is limited to 8 TBs. However, your hardware version, bus type, and controller type
also impact the size of your virtual disks.
Workstation Hardware Version
Bus Type
Controller Type
Maximum Disk Size
10, 11, 12
IDE
ATAPI
8192 GB (8TB)
10, 11, 12
SCSI
BusLogic
2040 GB (2TB)
10, 11, 12
SCSI
LSI Logic
8192 GB (8TB)
10, 11, 12
SCSI
LSI Logic SAS
8192 GB (8TB)
10, 11, 12
SATA
AHCI
8192 GB (8TB)
9, 8, 7, 6.5
All
All
2040 GB (2TB)
6.0, 5
All
All
950 GB
To discover your controller type, open the virtual machine .vmx file. The value of the setting
scsi0.virtualDev determines your controller type.
Value
Controller Type
Blank or not present
BusLogic
lsilogic
LSI Logic
lsisas1068
LSI Logic SAS
Specifying the Name and Location of Virtual Disk Files
During a custom configuration, if you instruct the New Virtual Machine wizard to create a new virtual disk,
use an existing virtual disk, or use a physical disk, the wizard prompts you for the name and location of a
virtual disk (.vmdk) file.
Table 4‑8. Required Information for Each Disk Type
Type of Disk
Description
New virtual disk
If you specified that all disk space should be stored in a
single file, Workstation Pro uses the filename that you
provide to create one 40GB disk file. If you specified that
disk space should be stored in multiple files,
Workstation Pro generates subsequent filenames by using
the filename that you provide. If you specified that files can
increase in size, subsequent filenames include an s in the
file number, for example, Windows 7-s001.vmdk. If you
specified that all disk space should be allocated when the
virtual disk is created, subsequent filenames include an f
in the file number, for example, Windows 7-f001.vmdk.
Existing virtual disk
You select the name and location of an existing virtual disk
file.
Physical disk
After the wizard prompts you to select a physical device
and specify whether to use the entire disk or individual
partitions, you must specify a virtual disk file.
Workstation Pro uses this virtual disk file to store partition
access configuration information for the physical disk.
Note Earlier VMware products use the .dsk extension for virtual disk files.
VMware, Inc.
49
Using VMware Workstation Pro
Customizing Virtual Machine Hardware
You can click Customize Hardware on the last page of the New Virtual Machine wizard to customize the
virtual machine hardware.
You can change the default hardware settings, including memory allocation, number of virtual CPUs,
CD/DVD and floppy drive settings, and the network connection type.
Create a New Virtual Machine on the Local Host
You create a new virtual machine on the local host system by running the New Virtual Machine wizard.
You can also use the New Virtual Machine wizard to create shared virtual machines, which can be used by
remote users, and remote virtual machines, which run on remote hosts. See Chapter 10, “Using Remote
Connections and Sharing Virtual Machines,” on page 211.
Prerequisites
n
Verify that you have the information the New Virtual Machine wizard requires to create a virtual
machine. See “Preparing to Create a New Virtual Machine,” on page 40.
n
Verify that the guest operating system you plan to install is supported. See the online VMware
Compatibility Guide on the VMware Web site.
n
See the VMware Guest Operating System Installation Guide for information about the guest operating
system that you plan to install.
n
If you are installing the guest operating system from an installer disc, insert the installer disc in the CDROM drive in the host system.
n
If you are installing the guest operating system from an ISO image file, verify that the ISO image file is
in a directory that is accessible to the host system.
n
If the virtual machine will use a physical disk or unused partition on the host system, perform the
appropriate preparation tasks. See “Prepare to Use a Physical Disk or Unused Partition,” on page 47.
Procedure
1
Start the New Virtual Machine wizard.
Option
Description
Windows host
n
n
Linux host
2
50
If the host is not connected to a remote server, select File > New
Virtual Machine.
If the host is connected to a remote server, select File > New Virtual
Machine > On this Computer.
Select File > New Virtual Machine.
Select the configuration type.
Option
Description
Typical
The wizard prompts you to specify or accept defaults for basic virtual
machine settings. The typical configuration type is appropriate in most
instances.
Custom
You must select the custom configuration type to make a different virtual
machine version than the default hardware compatibility setting, specify
the I/O adapter type for SCSI adapters, specify whether to create an IDE,
SCSI, or SATA virtual disk, use a physical disk instead of a virtual disk, use
an existing virtual disk, or allocate all virtual disk space rather than let disk
space gradually grow to the maximum disk size.
VMware, Inc.
Chapter 4 Creating Virtual Machines
3
If you selected the Custom option, select a hardware compatibility setting.
The hardware compatibility setting determines the hardware features of the virtual machine.
4
5
Select the source of the guest operating system.
Option
Description
Use a physical disc
Select the physical drive where you inserted the installation disc.
Use an ISO image
Type or browse to the location of the ISO image file for the guest operating
system.
Install the guest operating system
later
Create a virtual machine that has a blank disk. You must install the guest
operating system manually after you create the virtual machine.
Specify information about the guest operating system.
Option
Description
You are using Easy Install
Type the Easy Install information for the guest operating system.
You are not using Easy Install
Select the guest operating system type and version. If the guest operating
system is not listed, select Other.
6
Type a virtual machine name and type or browse to the directory for the virtual machine files.
7
Follow the prompts to configure the virtual machine.
If you selected a typical configuration, the wizard prompts you to configure the virtual disk size and
specify whether the disk should be split into multiple files. If you selected a custom configuration, the
wizard prompts you to configure the virtual machine processors, memory allocation, networking
configuration, I/O controller types, virtual disk type and mode, and virtual disk.
8
(Optional) Click Customize Hardware to customize the hardware configuration.
You can also modify virtual hardware settings after you create the virtual machine.
9
(Optional) Select Power on this virtual machine after creation to power on the virtual machine after
you create it.
This option is not available if you are installing the guest operating system manually.
10
Click Finish to create the virtual machine.
If you are using Easy Install, guest operating system installation begins when the virtual machine powers
on. The guest operating system installation is automated and typically runs without requiring any input
from you. After the guest operating system is installed, Easy Install installs VMware Tools.
If you are not using Easy Install, the virtual machine appears in the library.
What to do next
If you used Easy Install and the virtual machine did not power on when you finished the New Virtual
Machine wizard, power on the virtual machine to start the guest operating system installation. See “Use
Easy Install to Install a Guest Operating System,” on page 51.
If you did not use Easy Install, install the guest operating system manually. See “Install a Guest Operating
System Manually,” on page 52.
Use Easy Install to Install a Guest Operating System
When you use Easy Install, you usually do not need to provide information during guest operating system
installation.
If you did not provide all of the Easy Install information in the New Virtual Machine wizard, you might be
prompted for a product key, user name, or password.
VMware, Inc.
51
Using VMware Workstation Pro
Also, if the guest operating system installation consists of multiple discs or ISO image files, the installer
might prompt you for the next disk.
Procedure
n
If the installer prompts you for a product key, user name, or password, click in the virtual machine
window and type the required information.
Mouse and keyboard input are captured by the virtual machine.
n
If you are using physical discs and the installer prompts you for the next disk, use the CD-ROM or DVD
drive on the host system.
n
If you are using multiple ISO image files and the installer prompts you for the next disk, select the next
ISO image file.
Option
Description
Windows host
Click Change Disk and browse to the next ISO image file.
Linux host
a
b
c
Select VM > Removable Devices > CD/DVD > Settings and browse to
the next ISO image file.
Select Connected.
Click Save.
Install a Guest Operating System Manually
Installing a guest operating system in a virtual machine is similar to installing an operating system on a
physical computer. If you do not use Easy Install when you create a virtual machine in the New Virtual
Machine wizard, you must install the guest operating system manually.
You can install a guest operating system from an installer disc or ISO image file. You can also use a PXE
server to install the guest operating system over a network connection. If the host configuration does not
permit the virtual machine to boot from an installer disc, you can create an ISO image file from the installer
disc.
Prerequisites
n
Verify that the operating system is supported. See the online VMware Compatibility Guide on the
VMware Web site.
n
See the VMware Guest Operating System Installation Guide for information on the guest operating system
that you are installing.
Procedure
1
52
If you are installing the guest operating system from an installer disc, configure the virtual machine to
use a physical CD-ROM or DVD drive and configure the drive to connect at power on.
a
Select the virtual machine and select VM > Settings.
b
On the Hardware tab, select CD/DVD drive.
c
Select Connect at power on.
d
(Remote virtual machine only) Select the location of the CD-ROM or DVD drive.
e
Select Use physical drive and select a the drive.
f
Click OK to save your changes.
VMware, Inc.
Chapter 4 Creating Virtual Machines
2
If you are installing the guest operating system from an ISO image file, configure the CD/DVD drive in
the virtual machine to point to the ISO image file and configure the drive to connect at power on.
a
Select the virtual machine and select VM > Settings.
b
On the Hardware tab, select CD/DVD drive.
c
Select Connect at power on.
d
(Remote virtual machine only) Select the location of the ISO image file.
e
Select Use ISO image file and browse to the location of the ISO image file.
f
Click OK to save your changes.
3
If you are installing the guest operating system from an installer disc, insert the disc in the CD-ROM or
DVD drive.
4
Power on the virtual machine.
5
Follow the installation instructions provided by the operating system vendor.
6
If the operating system consists of multiple installer discs and you are prompted to insert the next disc,
insert the next disc in the physical drive.
7
If the operating system consists of multiple ISO image files, select the image file for the next CD.
8
a
Select VM > Removable Devices > CD/DVD > Disconnect and disconnect from the current ISO
image file.
b
Select VM > Removable Devices > CD/DVD > Settings and select the next ISO image file.
c
Select Connected and click OK.
Use the standard tools in the operating system to configure its settings.
What to do next
Install VMware Tools. You should install VMware Tools before you activate the license for the operating
system. See “Installing VMware Tools,” on page 61.
Installing a Guest Operating System on a Physical Disk or Unused Partition
You can install a guest operating system directly on a physical disk or unused partition on the host system.
A physical disk directly accesses an existing local disk or partition. You can use physical disks to run one or
more guest operating systems from existing disk partitions.
Workstation Pro supports physical disks up to 2 TB capacity. Booting from an operating system already set
up on an existing SCSI disk or partition is not supported.
Running an operating system natively on the host system and switching to running it inside a virtual
machine is similar to pulling the hard drive out of one computer and installing it in a second computer that
has a different motherboard and hardware. The steps you take depend on the guest operating system in the
virtual machine. In most cases, a guest operating system that is installed on a physical disk or unused
partition cannot boot outside of the virtual machine, even though the data is available to the host system.
See the Dual-Boot Computers and Virtual Machines technical note on the VMware Web site for information
about using an operating system that can also boot outside of a virtual machine.
VMware, Inc.
53
Using VMware Workstation Pro
After you configure a virtual machine to use one or more partitions on a physical disk, do not modify the
partition tables by running fdisk or a similar utility in the guest operating system. If you use fdisk or a
similar utility on the host operating system to modify the partition table of the physical disk, you must
recreate the virtual machine physical disk. All files that were on the physical disk are lost when you modify
the partition table.
Important You cannot use a physical disk to share files between the host system and a guest operating
system. Making the same partition visible to both the host system and a guest operating system can cause
data corruption. Instead, use shared folder to share files between the host system and a guest operating
system.
Create a Virtual Machine Shortcut
You can use a shortcut to select a virtual machine from your desktop.
Prerequisites
A virtual machine must be present in the Workstation Pro Virtual Machine Library.
This feature is available on Windows host systems only.
Procedure
1
Select a virtual machine from the virtual machine library.
2
Drag the virtual machine to the host desktop or to a folder.
A shortcut is created for the virtual machine.
You can select the virtual machine by double-clicking the shortcut.
Cloning Virtual Machines
Installing a guest operating system and applications can be time consuming. With clones, you can make
many copies of a virtual machine from a single installation and configuration process. Cloning a virtual
machine is faster and easier than copying it.
Clones are useful when you must deploy many identical virtual machines to a group. For example, an MIS
department can clone a virtual machine that has a suite of preconfigured office applications for each
employee. You can also configure a virtual machine that has a complete development environment and then
clone it repeatedly as a baseline configuration for software testing.
The existing virtual machine is called the parent virtual machine. When the cloning operation is complete,
the clone becomes a separate virtual machine.
Changes made to a clone do not affect the parent virtual machine, and changes made to the parent virtual
machine do not appear in a clone. The MAC address and UUID for a clone are different from the parent
virtual machine.
n
Using Linked Clones on page 55
A linked clone is a copy of a virtual machine that shares virtual disks with the parent virtual machine
in an ongoing manner.
n
Using Full Clones on page 55
A full clone is a complete and independent copy of a virtual machine. It shares nothing with the
parent virtual machine after the cloning operation. Ongoing operation of a full clone is entirely
separate from the parent virtual machine.
54
VMware, Inc.
Chapter 4 Creating Virtual Machines
n
Enable Template Mode for a Parent Virtual Machine of Linked Clones on page 55
To prevent the parent virtual machine for a linked clone from being deleted, you can designate the
parent as a template. When template mode is enabled, the virtual machine, and snapshots of the
virtual machine, cannot be deleted.
n
Clone a Virtual Machine on page 56
The Clone Virtual Machine wizard guides you through the process of cloning a virtual machine. You
do not need to locate and manually copy the parent virtual machine files.
Using Linked Clones
A linked clone is a copy of a virtual machine that shares virtual disks with the parent virtual machine in an
ongoing manner.
Because a linked clone is made from a snapshot of the parent, disk space is conserved and multiple virtual
machines can use the same software installation. All files available on the parent at the moment you take the
snapshot continue to remain available to the linked clone.
Ongoing changes to the virtual disk of the parent do not affect the linked clone, and changes to the disk of
the linked clone do not affect the parent. A linked clone must have access to the parent. Without access to
the parent, you cannot use a linked clone.
Because linked clones are created swiftly, you can create a unique virtual machine for each task. You can also
share a virtual machine with other users by storing the virtual machine on your local network where other
users can quickly make a linked clone. For example, a support team can reproduce a bug in a virtual
machine, and an engineer can quickly make a linked clone of that virtual machine to work on the bug.
You can make a linked clone from a linked clone, but the performance of the linked clone degrades. If you
make a full clone from a linked clone, the full clone is an independent virtual machine that does not require
access to the linked clone or its parent. You should make a linked clone of the parent virtual machine, if
possible.
Important You cannot delete a linked clone snapshot without destroying the linked clone. You can safely
delete the snapshot only if you also delete the clone that depends on it.
Using Full Clones
A full clone is a complete and independent copy of a virtual machine. It shares nothing with the parent
virtual machine after the cloning operation. Ongoing operation of a full clone is entirely separate from the
parent virtual machine.
Because a full clone does not share virtual disks with the parent virtual machine, full clones generally
perform better than linked clones. Full clones take longer to create than linked clones. Creating a full clone
can take several minutes if the files involved are large.
Because a full clone duplicates only the state of the virtual machine at the instant of the cloning operation, it
does not have access to snapshots of the parent virtual machine.
Enable Template Mode for a Parent Virtual Machine of Linked Clones
To prevent the parent virtual machine for a linked clone from being deleted, you can designate the parent as
a template. When template mode is enabled, the virtual machine, and snapshots of the virtual machine,
cannot be deleted.
Note You cannot enable template mode for a shared or remote virtual machine.
VMware, Inc.
55
Using VMware Workstation Pro
Prerequisites
If the parent does not have at least one snapshot, create a snapshot. See “Taking Snapshots of Virtual
Machines,” on page 105.
Procedure
1
Select the virtual machine to use as a parent of the linked clone and select VM > Settings.
2
On the Options tab, select Advanced.
3
Select Enable Template mode (to be used for cloning) and click OK.
Clone a Virtual Machine
The Clone Virtual Machine wizard guides you through the process of cloning a virtual machine. You do not
need to locate and manually copy the parent virtual machine files.
Prerequisites
n
Familiarize yourself with the different types of clones. See “Using Full Clones,” on page 55 and “Using
Linked Clones,” on page 55.
n
Run a defragmentation utility in the guest operating system to defragment the drives on the parent
virtual machine.
n
If the parent virtual machine is a Workstation 4.x and Workstation 4.x-compatible virtual machine,
upgrade it to Workstation 5.x or later.
n
If you are creating a linked clone, enable template mode for the parent virtual machine. See “Enable
Template Mode for a Parent Virtual Machine of Linked Clones,” on page 55.
n
Power off the parent virtual machine.
Procedure
1
Select the parent virtual machine and select VM > Manage > Clone.
2
Select the state of the parent from which you want to create a clone.
You can create a clone from the current state of the parent virtual machine or from an existing snapshot.
If you select the current state, Workstation Pro creates a snapshot of the parent virtual machine before
cloning it.
Note You cannot clone from the current state if template mode is enabled for the parent virtual
machine.
3
Specify whether to create a linked clone or a full clone.
4
Type a name and a location for the cloned virtual machine.
5
Click Finish to create the clone and Close to exit the wizard.
A full clone can take several minutes to create, depending on the size of the virtual disk that is being
duplicated.
6
If the parent virtual machine uses a static IP address, change the static IP address of the clone before the
clone connects to the network to prevent IP address conflicts.
Although the wizard creates a new MAC address and UUID for the clone, other configuration
information, such as the virtual machine name and static IP address configuration, is identical to that of
the parent virtual machine.
The summary view for a linked clone shows the path to the virtual machine configuration (.vmx) file of the
parent virtual machine.
56
VMware, Inc.
Chapter 4 Creating Virtual Machines
Virtualize a Physical Machine
You can create a virtual machine from a Windows physical machine in Workstation Pro. When you
virtualize a physical machine, you capture all of the applications, documents, and settings on the physical
machine in a new virtual machine. Workstation Pro must be running on a Windows host system to use this
feature.
Prerequisites
n
Verify that the physical machine that you want to virtualize is running Windows. You cannot create a
virtual machine from a non-Windows physical machine in Workstation Pro.
Note You can create a virtual machine from a Linux physical machine using vCenter Converter
Standalone. For more information, see the vCenter Converter Standalone documentation.
n
Verify that you have administrative access on the physical machine that you want to virtualize and on
the Workstation Pro host system.
n
Verify that the Workstation Pro host system has network access to the physical machine that you want
to virtualize.
n
Verify that on the Workstation Pro host system you have disabled User Account Control (UAC). For
instructions, see “Prepare a Windows Physical Machine for Virtualization,” on page 58.
n
Turn off firewall applications running on the physical machine that you want to virtualize.
n
Prepare the physical machine for virtualization. See “Prepare a Windows Physical Machine for
Virtualization,” on page 58.
Procedure
1
Power on the physical machine that you want to virtualize.
2
On the Windows host system, in Workstation Pro, select File > Virtualize a Physical Machine.
If you have never virtualized a physical machine or imported a third-party virtual machine in
Workstation Pro, you need to download and install VMware vCenter Converter Standalone. After the
VMware vCenter Converter Standalone installation is finished, you must restart the virtualization
wizard.
3
Type the hostname or IP address, user name, and password for the physical machine that you want to
virtualize.
You must use the Administrator account or a user account that is a member of the local Administrators
group.
4
Type a name for the new virtual machine and specify a location on the host system in which to store the
virtual machine files.
5
Type the user name and password for your user account on the host system.
6
Click Finish to create a virtual machine from the physical machine.
The amount of time required to create the virtual machine depends on the size of the hard disk on the
physical machine.
VMware Tools installation begins the first time you power on the new virtual machine.
VMware, Inc.
57
Using VMware Workstation Pro
Prepare a Windows Physical Machine for Virtualization
To avoid problems related to permissions and network access, you must perform certain steps to prepare a
Windows physical machine before you run the Virtualize a Physical Machine wizard.
Procedure
u
Disable User Account Control (UAC) on the Windows physical machine.
n
On Windows Vista, open the User Accounts control panel, select Turn User Account Control On
or Off, and deselect Use User Account Control (UAC) to help protect your computer.
n
On Windows 7 or later, open the Change User Account Control Settings control panel and drag
the slider to Never notify.
Troubleshoot Windows Authentication Problems During Physical Machine
Virtualization
User authentication fails when the Virtualize a Physical Machine wizard attempts to connect a Windows
physical machine.
Problem
After you provide user credentials for the physical machine, the Virtualize a Physical Machine wizard
reports that your user credentials are incorrect or you have insufficient permissions to connect to the
physical machine.
Cause
Simple file sharing or User Account Control (UAC) is enabled on the physical machine.
Solution
Perform the steps in “Prepare a Windows Physical Machine for Virtualization,” on page 58 and rerun the
Virtualize a Physical Machine wizard.
Troubleshoot Windows Activation Problems
A virtual machine that you create from a physical machine prompts you to activate Windows when you use
it in Workstation Pro.
Problem
After you create a virtual machine from a Windows Vista or Windows 7 physical machine, or from a
physical PC that came with Windows preinstalled, you were required to reactivate Windows in the virtual
machine.
Cause
When you create a virtual machine from a Windows Vista or Windows 7 physical machine, the operating
system detects that the computer hardware has changed. When you make a significant hardware change,
Microsoft requires you to activate Windows again.
The OEM versions of Windows that are preinstalled on some new computers are customized for those
computers. OEM licenses of Windows are not transferrable.
Solution
Any virtual machine that was created from a physical machine that had its Windows license key
successfully activated needs to be reactivated when you run it in Workstation Pro.
58
VMware, Inc.
Chapter 4 Creating Virtual Machines
The activation process in Windows Vista and Windows 7 is different from the Windows XP activation
process. In Windows 7, retail activation keys are good for only one use. If you enter the same activation key
in Workstation Pro that you used previously, you cannot successfully activate the virtual machine.
The activation wizard tells you that the activation key was already used and prompts you to call the
Microsoft activation hotline to get a second key. If you did not previously call the hotline for the same
license key, you should receive a new activation key. Your call is not transferred to an operator unless you
call repeatedly for the same key.
See the Microsoft Web site for more information about why reactivation is necessary.
Importing Virtual Machines
You can import virtual machines in other formats into Workstation Pro.
Import a Windows XP Mode Virtual Machine
You can import a Windows XP Mode virtual machine and run it in Workstation Pro. When you import a
Windows XP Mode virtual machine, Workstation Pro creates a new virtual machine in VMware runtime
(.vmx) format.
You can power on only one Windows XP Mode virtual machine at a time in Workstation Pro. If you move a
Windows XP Mode virtual machine to another host system, it becomes a new virtual machine and you must
activate it.
Note Changes made to the original Windows XP Mode virtual machine through Virtual PC do not affect
the virtual machine imported in Workstation Pro.
Prerequisites
n
Verify that the Windows 7 Professional, Enterprise, or Ultimate edition operating system is running on
the host system. Importing Windows XP Mode virtual machines is not supported on Linux host
systems or on host systems that are running other versions of Windows.
n
Download and install the Windows XP Mode virtual machine on the host system.
Procedure
1
Select File > Open and browse to the virtual machine configuration (.vmc) file.
If you have never virtualized a physical machine or imported a third-party virtual machine in
Workstation Pro, you need to download and install VMware vCenter Converter Standalone. After the
VMware vCenter Converter Standalone installation is finished, you must restart the import.
2
Type a name for the new virtual machine, type or browse to the directory for the virtual machine files,
and click Import.
Workstation Pro begins importing the Windows XP Mode virtual machine.
After Workstation Pro successfully imports the Windows XP Mode virtual machine, a new virtual machine
appears in the virtual machine library.
Import an Open Virtualization Format Virtual Machine
You can import an Open Virtualization Format (OVF) virtual machine and run it in Workstation Pro.
Workstation Pro converts the virtual machine from OVF format to VMware runtime (.vmx) format. You can
import both .ovf and .ova files.
OVF is a platform-independent, efficient, extensible, and open packaging and distribution format for virtual
machines. For example, you can import OVF virtual machines exported from VMware Fusion™ or Oracle
VM VirtualBox into Workstation Pro. You can import OVF 1.0 and later files only.
VMware, Inc.
59
Using VMware Workstation Pro
You can also use the standalone OVF Tool to convert an OVF virtual machine to VMware runtime format.
The standalone version of the OVF Tool is installed in the Workstation Pro installation directory under
OVFTool. See the OVF Tool User Guide on the VMware Web site for information on using the OVF Tool.
Procedure
1
In Workstation Pro, select File > Open.
2
Browse to the .ovf or .ova file and click Open.
3
Type a name for the virtual machine, type or browse to the directory for the virtual machine files, and
click Import.
Workstation Pro performs OVF specification conformance and virtual hardware compliance checks. A
status bar indicates the progress of the import process.
4
If the import fails, click Retry to try again, or click Cancel to cancel the import.
If you retry the import, Workstation Pro relaxes the OVF specification conformance and virtual
hardware compliance checks and you might not be able to use the virtual machine in Workstation Pro.
After Workstation Pro successfully imports the OVF virtual machine, the virtual machine appears in the
virtual machine library.
Import a Windows Virtual PC Virtual Machine
You can import a Windows Virtual PC virtual machine and run it in Workstation Pro. Workstation Pro
converts the virtual machine from Virtual PC (.vmc) format to VMware runtime (.vmx) format. This feature is
supported only on Windows host systems.
Prerequisites
Download and install the Virtual PC virtual machine on the Windows host system.
Procedure
1
In Workstation Pro, select File > Open.
If you have never imported a third-party virtual machine or virtualized a physical machine in
Workstation Pro, Workstation Pro installs VMware vCenter Converter Standalone. After the installation
is finished, you must restart the import.
2
Browse to the .vmc file and click Open.
3
Type a name for the virtual machine, type or browse to the directory for the virtual machine files, and
click Import.
After Workstation Pro successfully imports the Virtual PC virtual machine, the virtual machine appears in
the virtual machine library.
Installing and Upgrading VMware Tools
Installing VMware Tools is part of the process of creating a new virtual machine. Upgrading VMware Tools
is part of the process of keeping virtual machines up to current standards.
For the best performance and latest updates, install or upgrade VMware Tools to match the version of
Workstation Pro that you are using. Other compatibility options are also available.
For more information about using VMware Tools, see Installing and Configuring VMware Tools at
http://www.vmware.com/pdf/vmware-tools-installation-configuration.pdf .
60
VMware, Inc.
Chapter 4 Creating Virtual Machines
n
Installing VMware Tools on page 61
Although your guest operating systems can run without VMware Tools, many VMware features are
not available until you install VMware Tools. When you install VMware Tools, the utilities in the tools
suite enhances the performance of your virtual machine’s guest operating system and improves the
management of your virtual machines.
n
Upgrading VMware Tools on page 62
You can upgrade VMware Tools manually, or you can configure virtual machines to check for and
install newer versions of VMware Tools.
n
Configure Automatic Software Updates on page 63
You can configure Workstation Pro to automatically download software updates, including new
versions of VMware Tools. When automatic software updates are enabled, Workstation Pro always
includes the latest support for guest operating systems and virtual machines always have the latest
version of VMware Tools.
n
Configure VMware Tools Updates for a Specific Virtual Machine on page 64
You can configure virtual machines that have Windows or Linux guest operating systems to update
VMware Tools automatically. For other guest operating systems, you must manually update VMware
Tools.
n
Manually Installing and Upgrading VMware Tools on page 65
You can manually install or upgrade VMware Tools on Windows, Linux, NetWare, Solaris, and
FreeBSD virtual machines.
n
Start the VMware User Process Manually If You Do Not Use a Session Manager on page 70
VMware Tools in Linux, Solaris, and FreeBSD guest operating systems uses the VMware User process
executable file. This program implements the fit-guest-to-window feature and Unity mode, among
other features.
n
Uninstalling VMware Tools on page 71
If the upgrade process of VMware Tools is incomplete, you can uninstall and then reinstall the
VMware Tools.
Installing VMware Tools
Although your guest operating systems can run without VMware Tools, many VMware features are not
available until you install VMware Tools. When you install VMware Tools, the utilities in the tools suite
enhances the performance of your virtual machine’s guest operating system and improves the management
of your virtual machines.
Installing VMware Tools is part of the process of creating new virtual machines, and upgrading VMware
Tools is part of the process of keeping your virtual machine up to current standards. For information about
creating virtual machines, see the Virtual Machine Administration Guide.
The installers for VMware Tools are ISO image files. An ISO image file looks like a CD-ROM to your guest
operating system. Each type of guest operating system, including Windows, Linux, Solaris, FreeBSD, and
NetWare, has an ISO image file. When you select the command to install or upgrade VMware Tools, the
virtual machine’s first virtual CD-ROM disk drive temporarily connects to the VMware Tools ISO file for
your guest operating system.
You can use the Windows Easy Install or Linux Easy Install feature to install VMware Tools as soon as the
operating system is finished installing.
VMware, Inc.
61
Using VMware Workstation Pro
The most recent versions of the ISO files are stored on a VMware Web site. When you select the command to
install or upgrade VMware Tools, the VMware product determines whether it has downloaded the most
recent version of the ISO file for the specific operating system. If the latest version has not been downloaded
or if no VMware Tools ISO file for that operating system has ever been downloaded, you are prompted to
download the file.
n
For information about installing or upgrading VMware Tools in Windows virtual machines, see
“Manually Install or Upgrade VMware Tools in a Windows Virtual Machine,” on page 65 and
Automate VMware Tools Installation for Multiple Windows Virtual Machines.
n
For information about installing or upgrading VMware Tools in Linux virtual machines, see “Manually
Install or Upgrade VMware Tools in a Linux Virtual Machine,” on page 66.
n
For information about installing or upgrading VMware Tools in Solaris virtual machines, see “Manually
Install or Upgrade VMware Tools in a Solaris Virtual Machine,” on page 68.
n
For information about installing or upgrading VMware Tools in NetWare virtual machines, see
“Manually Install or Upgrade VMware Tools in a NetWare Virtual Machine,” on page 68.
n
For information about installing or upgrading VMware Tools in FreeBSD virtual machines, see
“Manually Install or Upgrade VMware Tools in a FreeBSD Virtual Machine,” on page 69.
Upgrading VMware Tools
You can upgrade VMware Tools manually, or you can configure virtual machines to check for and install
newer versions of VMware Tools.
The guest operating system checks the version of VMware Tools when you power on a virtual machine. The
status bar of your virtual machine displays a message when a new version is available.
In Windows virtual machines, you can set VMware Tools to notify you when an upgrade is available. If this
notification option is enabled, the VMware Tools icon in the Windows taskbar includes a yellow caution icon
when a VMware Tools upgrade is available.
To install a VMware Tools upgrade, you can use the same procedure that you used for installing VMware
Tools the first time. Upgrading VMware Tools means installing a new version.
For Windows and Linux guest operating systems, you can configure the virtual machine to automatically
upgrade VMware Tools. Although the version check is performed when you power on the virtual machine,
on Windows guest operating systems, the automatic upgrade occurs when you power off or restart the
virtual machine. The status bar displays the message Installing VMware Tools ... when an upgrade is in
progress.
Important After you upgrade VMware Tools on Linux guest operating systems, new network modules
are available but are not used until you either restart the guest operating system or stop networking, unload
and reload the VMware networking kernel modules, and restart networking. This behavior means that even
if VMware Tools is set to automatically upgrade, you must restart or reload network modules to make new
features available.
This strategy avoids network interruptions and allows you to install VMware Tools over SSH.
Upgrading VMware Tools on Windows guest operation systems automatically installs the WDDM graphics
drivers. The WDDM graphics driver makes the sleep mode available in guest OS power settings to adjust
the sleep options. For example, you can use the sleep mode setting Change when the computer sleeps to
configure your guest OS to automatically go to sleep mode after a certain time or prevent your guest OS
from automatically switching to sleep mode after being idle for some time.
62
VMware, Inc.
Chapter 4 Creating Virtual Machines
Some features in a particular release of a VMware product might depend on installing or upgrading to the
version of VMware Tools included in that release. Upgrading to the latest version of VMware Tools is not
always necessary. Newer versions of VMware Tools are compatible with several host versions. To avoid
unnecessary upgrades, evaluate whether the added features and capabilities are necessary for your
environment.
Configure Automatic Software Updates
You can configure Workstation Pro to automatically download software updates, including new versions of
VMware Tools. When automatic software updates are enabled, Workstation Pro always includes the latest
support for guest operating systems and virtual machines always have the latest version of VMware Tools.
Prerequisites
n
On a Linux host, become root. On Linux systems, non-root users are not allowed to modify the
preference setting for VMware Tools updates.
n
Verify that the host system is connected to the Internet.
Procedure
1
Select Edit > Preferences and select Updates.
2
Select a software update download option.
If you deselect all of the software update options, automatic software updates are disabled.
3
VMware, Inc.
Option
Description
Check for product updates on
startup
When Workstation Pro starts, it checks for new versions of the application
and installed software components.
Check for software components as
needed
When a software component is needed, for example, when you install or
upgrade VMware Tools on a virtual machine, Workstation Pro checks for a
new version of the component.
Download All Components Now
Click this button to download all software updates immediately. This
option is useful if you are planning to use a virtual machine at a later time
when you do not have access to the Internet.
If you use a proxy server to connect to the Internet, click Connection Settings and select a proxy setting.
Option
Description
No proxy
Select this option if you do not use a proxy server. This is the default
setting.
Windows proxy settings
(Windows hosts only) Workstation Pro uses the host proxy settings from
the Connections tab in the Internet Options control panel to access the
VMware Update Server. Click Internet Options to set the guest connection
options. Type a user name and password to use for proxy server
authentication. If you leave either the Username or Password text box
blank, Workstation Pro does not use either value.
Manual proxy settings
Select an HTTP or SOCKS proxy, specify the proxy server address and
designate a port number to access the VMware Update Server. Type a user
name and password to use for proxy server authentication. If you leave
either the Username or Password text box blank, Workstation Pro does not
use either value (Windows hosts) or it uses the user name and password
set in the gnome settings (Linux hosts).
63
Using VMware Workstation Pro
4
To update VMware Tools when you power on a virtual machine or shut down the guest operating
system, select Automatically update VMware Tools on a virtual machine.
You can override this setting for a specific virtual machine by modifying virtual machine settings.
When you power on a virtual machine, you are prompted to download VMware Tools if a new version
is available.
5
Click OK to save your changes.
What to do next
To override the VMware Tools update setting for a specific virtual machine, edit the virtual machine settings.
See “Configure VMware Tools Updates for a Specific Virtual Machine,” on page 64.
Configure VMware Tools Updates for a Specific Virtual Machine
You can configure virtual machines that have Windows or Linux guest operating systems to update
VMware Tools automatically. For other guest operating systems, you must manually update VMware Tools.
Automatic VMware Tools updates are supported for versions of VMware Tools included in Workstation 5.5
and later virtual machines only. Automatic updates are not supported for versions of VMware Tools
included in virtual machines created with VMware Server 1.x.
Important If you update VMware Tools in a Windows virtual machine that was created with Workstation
4 or 5.x, some new components are not installed. To install the new components, you must uninstall the old
version of VMware Tools and install the new version of VMware Tools.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select VMware Tools.
3
Select a VMware Tools update setting.
4
64
Option
Description
Update manually (do nothing)
You must update VMware Tools manually. The virtual machine status bar
indicates when a new version of VMware Tools is available.
Update automatically
VMware Tools is updated automatically. The virtual machine status bar
indicates when an update is in progress. If you are logged in to a Windows
guest, a restart prompt appears after the update is complete. If you are not
logged in, the operating system restarts without prompting. An autoupdate check is performed as part of the boot sequence when you power
on the virtual machine. If the virtual machine was suspended and you
resume it or restore it to a snapshot during the boot sequence before this
check, the automatic update occurs as planned. If you resume the virtual
machine or restore it to a snapshot after the check, the automatic update
does not occur.
Use application default (currently
update manually)
Use the default VMware Tools update behavior. The default behavior is set
in Workstation Pro preferences.
Note You cannot configure this option for a shared or remote virtual
machine.
Click OK to save your changes.
VMware, Inc.
Chapter 4 Creating Virtual Machines
Manually Installing and Upgrading VMware Tools
You can manually install or upgrade VMware Tools on Windows, Linux, NetWare, Solaris, and FreeBSD
virtual machines.
If you are installing VMware Tools in a number of Windows virtual machines, you can automate its
installation by using the VMware Tools setup.exe at a command prompt in the guest operating system. See
Installing and Configuring VMware Tools at
http://www.vmware.com/pdf/vmware-tools-installation-configuration.pdf for more information.
n
Manually Install or Upgrade VMware Tools in a Windows Virtual Machine on page 65
All supported Windows guest operating systems support VMware Tools.
n
Manually Install or Upgrade VMware Tools in a Linux Virtual Machine on page 66
For Linux virtual machines, you manually install or upgrade VMware Tools by using the command
line.
n
Manually Install or Upgrade VMware Tools in a NetWare Virtual Machine on page 68
For NetWare virtual machines, you manually install or upgrade VMware Tools by using the command
line.
n
Manually Install or Upgrade VMware Tools in a Solaris Virtual Machine on page 68
For Solaris virtual machines, you manually install or upgrade VMware Tools by using the command
line.
n
Manually Install or Upgrade VMware Tools in a FreeBSD Virtual Machine on page 69
For FreeBSD virtual machines, you manually install or upgrade VMware Tools by using the command
line.
Manually Install or Upgrade VMware Tools in a Windows Virtual Machine
All supported Windows guest operating systems support VMware Tools.
Before you upgrade VMware Tools, consider the environment that the virtual machine runs in and weigh
the benefits of different upgrade strategies. For example, you can install the latest version of VMware Tools
to enhance the performance of the virtual machine's guest operating system and improve virtual machine
management, or you can continue using the existing version to provide more flexibility and avoid downtime
in your environment.
For Windows 2000 and later, VMware Tools installs a virtual machine upgrade helper tool. This tool restores
the network configuration if you upgrade the virtual machine compatibility from ESX/ESXi 3.5 to ESX/ESXi
4.0 and later or from Workstation 5.5 to Workstation 6.0 and later.
Prerequisites
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
If you connected the virtual machine’s virtual CD/DVD drive to an ISO image file when you installed
the operating system, change the setting so that the virtual CD/DVD drive is configured to autodetect a
physical drive.
The autodetect setting enables the virtual machine's first virtual CD/DVD drive to detect and connect to
the VMware Tools ISO file for a VMware Tools installation. This ISO file looks like a physical CD to
your guest operating system. Use the virtual machine settings editor to set the CD/DVD drive to
autodetect a physical drive.
VMware, Inc.
65
Using VMware Workstation Pro
n
Log in as an administrator unless you are using an older Windows operating system. Any user can
install VMware Tools in a Windows 95, Windows 98, or Windows ME guest operating system. For
operating systems newer than these, you must log in as an administrator.
Procedure
1
On the host, from the Workstation Pro menu bar, select VM > Install VMware Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
If you are installing VMware Tools for the first time, click OK on the Install VMware Tools information
page.
If autorun is enabled for the CD-ROM drive in the guest operating system, the VMware Tools
installation wizard starts.
3
If autorun is not enabled, to manually launch the wizard, click Start > Run and enter D:\setup.exe,
where D: is your first virtual CD-ROM drive. Use D:\setup64.exe for 64-bit Windows guest operating
system.
4
Follow the on-screen instructions.
5
If the New Hardware wizard appears, follow the prompts and accept the defaults.
6
If you are installing a beta or RC version of VMware Tools and you see a warning that a package or
driver is not signed, click Install Anyway to complete the installation.
7
When prompted, reboot the virtual machine.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Manually Install or Upgrade VMware Tools in a Linux Virtual Machine
For Linux virtual machines, you manually install or upgrade VMware Tools by using the command line.
Prerequisites
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating
system.
Procedure
1
On the host, from the Workstation Pro menu bar, select VM > Install VMware Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
In the virtual machine, log in to the guest operating system as root and open a terminal window.
3
Run the mount command with no arguments to determine whether your Linux distribution
automatically mounted the VMware Tools virtual CD-ROM image.
If the CD-ROM device is mounted, the CD-ROM device and its mount point are listed as something like
this:
/dev/cdrom on /mnt/cdrom type iso9660 (ro,nosuid,nodev)
66
VMware, Inc.
Chapter 4 Creating Virtual Machines
4
If the VMware Tools virtual CD-ROM image is not mounted, mount the CD-ROM drive.
a
If a mount point directory does not already exist, create it.
mkdir /mnt/cdrom
Some Linux distributions use different mount point names. For example, on some distributions the
mount point is /media/VMware Tools rather than /mnt/cdrom. Modify the command to reflect the
conventions that your distribution uses.
b
Mount the CD-ROM drive.
mount /dev/cdrom /mnt/cdrom
Some Linux distributions use different device names or organize the /dev directory differently. If
your CD-ROM drive is not /dev/cdrom or if the mount point for a CD-ROM is not /mnt/cdrom,
modify the command to reflect the conventions that your distribution uses.
5
Change to a working directory, for example, /tmp.
cd /tmp
6
Delete any previous vmware-tools-distrib directory before you install VMware Tools.
The location of this directory depends on where you placed it during the previous installation. Often
this directory is placed in /tmp/vmware-tools-distrib.
7
List the contents of the mount point directory and note the filename of the VMware Tools tar installer.
ls mount-point
8
Uncompress the installer.
tar zxpf /mnt/cdrom/VMwareTools-x.x.x-yyyy.tar.gz
The value x.x.x is the product version number, and yyyy is the build number of the product release.
If you attempt to install a tar installation over an RPM installation, or the reverse, the installer detects
the previous installation and must convert the installer database format before continuing.
9
If necessary, unmount the CD-ROM image.
umount /dev/cdrom
If your Linux distribution automatically mounted the CD-ROM, you do not need to unmount the
image.
10
Run the installer and configure VMware Tools.
cd vmware-tools-distrib
./vmware-install.pl
Usually, the vmware-config-tools.pl configuration file runs after the installer file finishes running.
11
Follow the prompts to accept the default values, if appropriate for your configuration.
12
Follow the instructions at the end of the script.
Depending on the features you use, these instructions can include restarting the X session, restarting
networking, logging in again, and starting the VMware User process. You can alternatively reboot the
guest operating system to accomplish all these tasks.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
VMware, Inc.
67
Using VMware Workstation Pro
Manually Install or Upgrade VMware Tools in a NetWare Virtual Machine
For NetWare virtual machines, you manually install or upgrade VMware Tools by using the command line.
Before you upgrade VMware Tools, consider the environment that the virtual machine runs in and weigh
the benefits of different upgrade strategies. For example, you can install the latest version of VMware Tools
to enhance the performance of the virtual machine's guest operating system and improve virtual machine
management, or you can continue using the existing version to provide more flexibility and avoid downtime
in your environment.
Prerequisites
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating
system.
Procedure
1
On the host, from the Workstation Pro menu bar, select VM > Install VMware Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
Load the CD-ROM driver so that the virtual CD-ROM device mounts the ISO image as a volume.
Operating System
Command
NetWare 6.5
LOAD CDDVD
NetWare 6.0 or NetWare 5.1
LOAD CD9660.NSS
NetWare 4.2 (not available in
vSphere)
load cdrom
When the installation finishes, the message VMware Tools for NetWare are now running appears in the
Logger Screen for NetWare 6.5 and NetWare 6.0 guest operating systems and in the Console Screen for
NetWare 4.2 and 5.1 operating systems.
3
If the VMware Tools virtual disc (netware.iso) is attached to the virtual machine, right-click the CDROM icon in the status bar of the console window and select Disconnect to disconnect it.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Manually Install or Upgrade VMware Tools in a Solaris Virtual Machine
For Solaris virtual machines, you manually install or upgrade VMware Tools by using the command line.
Before you upgrade VMware Tools, consider the environment that the virtual machine runs in and weigh
the benefits of different upgrade strategies. For example, you can install the latest version of VMware Tools
to enhance the performance of the virtual machine's guest operating system and improve virtual machine
management, or you can continue using the existing version to provide more flexibility and avoid downtime
in your environment.
Prerequisites
68
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating
system.
VMware, Inc.
Chapter 4 Creating Virtual Machines
Procedure
1
On the host, from the Workstation Pro menu bar, select VM > Install VMware Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
In the virtual machine, log in to the guest operating system as root and open a terminal window.
3
If the Solaris volume manager does not mount the CD-ROM under /cdrom/vmwaretools, restart the
volume manager.
/etc/init.d/volmgt stop
/etc/init.d/volmgt start
4
Change to a working directory, for example, /tmp.
cd /tmp
5
Extract VMware Tools.
gunzip -c /cdrom/vmwaretools/vmware-solaris-tools.tar.gz | tar xf -
6
Run the installer and configure VMware Tools.
cd vmware-tools-distrib
./vmware-install.pl
Usually, the vmware-config-tools.pl configuration file runs after the installer file finishes running.
7
Follow the prompts to accept the default values, if appropriate for your configuration.
8
Follow the instructions at the end of the script.
Depending on the features you use, these instructions can include restarting the X session, restarting
networking, logging in again, and starting the VMware User process. You can alternatively reboot the
guest operating system to accomplish all these tasks.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Manually Install or Upgrade VMware Tools in a FreeBSD Virtual Machine
For FreeBSD virtual machines, you manually install or upgrade VMware Tools by using the command line.
Before you upgrade VMware Tools, consider the environment that the virtual machine runs in and weigh
the benefits of different upgrade strategies. For example, you can install the latest version of VMware Tools
to enhance the performance of the virtual machine's guest operating system and improve virtual machine
management, or you can continue using the existing version to provide more flexibility and avoid downtime
in your environment.
Prerequisites
n
Power on the virtual machine.
n
Verify that the guest operating system is running.
n
Because the VMware Tools installer is written in Perl, verify that Perl is installed in the guest operating
system.
Procedure
1
On the host, from the Workstation Pro menu bar, select VM > Install VMware Tools.
If an earlier version of VMware Tools is installed, the menu item is Update VMware Tools.
2
VMware, Inc.
In the virtual machine, log in to the guest operating system as root and open a terminal window.
69
Using VMware Workstation Pro
3
If the distribution does not automatically mount CD-ROMs, mount the VMware Tools virtual CD-ROM
image.
For example, type mount /cdrom.
4
Change to a working directory, for example, /tmp.
cd /tmp
5
Untar the VMware Tools tar file.
tar zxpf /cdrom/vmware-freebsd-tools.tar.gz
6
If the distribution does not use automounting, unmount the VMware Tools virtual CD-ROM image.
umount /cdrom
7
Run the installer and configure VMware Tools.
cd vmware-tools-distrib
./vmware-install.pl
Usually, the vmware-config-tools.pl configuration file runs after the installer file finishes running.
8
Follow the prompts to accept the default values, if appropriate for your configuration.
9
Follow the instructions at the end of the script.
Depending on the features you use, these instructions can include restarting the X session, restarting
networking, logging in again, and starting the VMware User process. You can alternatively reboot the
guest operating system to accomplish all these tasks.
What to do next
If a new virtual hardware version is available for the virtual machine, upgrade the virtual hardware.
Start the VMware User Process Manually If You Do Not Use a Session Manager
VMware Tools in Linux, Solaris, and FreeBSD guest operating systems uses the VMware User process
executable file. This program implements the fit-guest-to-window feature and Unity mode, among other
features.
Normally, this process starts after you configure VMware Tools, log out of the desktop environment, and log
back in. The vmware-user program is located in the directory in which you selected to install binary
programs, which defaults to /usr/bin. The startup script that you need to modify depends on your system.
You must start the process manually in the following environments:
70
n
If you run an X session without a session manager. For example, if you use startx to start a desktop
session and do not use xdm, kdm, or gdm.
n
If you are using an older version of GNOME without gdm or xdm.
n
If you are using a session manager or environment that does not support the Desktop Application
Autostart Specification, available from http://standards.freedesktop.org.
n
If you upgrade VMware Tools.
VMware, Inc.
Chapter 4 Creating Virtual Machines
Procedure
u
Start the VMware User process.
Option
Action
Start the VMware User process
when you start an X session.
Add vmware-user to the appropriate X startup script, such as
the .xsession or .xinitrc file.
Start the process after a VMware
Tools software upgrade, or if certain
features are not working.
Open a terminal window and type the vmware-user command.
Uninstalling VMware Tools
If the upgrade process of VMware Tools is incomplete, you can uninstall and then reinstall the VMware
Tools.
Prerequisites
n
Power on the virtual machine.
n
Log in to the guest operating system.
Procedure
u
Select a method to uninstall VMware Tools.
Operating System
Action
Windows 7, 8, 8.1, or Windows 10
In the guest operating system, select Programs > Uninstall a program.
Windows Vista and Windows Server
2008
In the guest operating system, select Programs and Features > Uninstall a
program.
Windows XP and earlier
In the guest operating system, select Add/Remove Programs.
Linux
Log in as root and enter vmware-uninstall-tools.pl in a terminal
window.
Mac OS X Server
Use the Uninstall VMware Tools application, found
in /Library/Application Support/VMware Tools.
What to do next
Reinstall VMware Tools.
Virtual Machine Files
When you create a virtual machine, Workstation Pro creates a set of files for that specific virtual machine.
Virtual machine files are stored in either the virtual machines directory or the working directory. Both
directories are typically on the host system.
Table 4‑9. Virtual Machine Files
Extension
File Name
Description
.vmx
vmname.vmx
The primary configuration file, which stores virtual machine
settings. If you created the virtual machine with an earlier version of
Workstation Pro on a Linux host, this file might have a .cfg
extension.
.log
vmname.log
or
The main log file. If you need to troubleshoot a problem, refer to this
file. This file is stored in the same directory as the .vmx file.
vmware.log
VMware, Inc.
71
Using VMware Workstation Pro
Table 4‑9. Virtual Machine Files (Continued)
Extension
File Name
Description
.nvram
vmname.nvram
or
The NVRAM file, which stores the state of the virtual machine BIOS.
This file is stored in the same directory as the .vmx file.
nvram
.vmdk
vmname.vmdk
Virtual disk files, which store the contents of the virtual machine
hard disk drive. These files are stored in the same directory as
the .vmx file.
A virtual disk is made up of one or more virtual disk files. The
virtual machine settings show the name of the first file in the set.
This file contains pointers to the other files in the set.
If you specify that all disk space should be allocated when the
virtual disk is created, these files start at the maximum size and do
not grow. Almost all of the file content is virtual machine data. A
small portion of the file is allotted to virtual machine overhead.
If the virtual machine is connected directly to a physical disk, the
virtual disk file stores information about the partitions that the
virtual machine is allowed to access.
Note Earlier VMware products use the .dsk extension for virtual
disk files.
vmname-s###.vmdk
If you specified that the files can increase, filenames include an s in
the file number, for example, Windows 7-s001.vmdk.
If you specified that the virtual disk is divided into 2GB sections, the
number of files depends on the size of the virtual disk. As data is
added to a virtual disk, the files increase to a maximum of 2GB each.
vmname-f###.vmdk
If all disk space was allocated when the disk was created, filenames
include an f, for example, Windows 7-f001.vmdk.
vmname-disk-###.vmdk
If the virtual machine has one or more snapshots, some files are redo
log files. These files store changes made to a virtual disk while the
virtual machine is running. The ### indicates a unique suffix that
Workstation Pro adds to avoid duplicate file names.
uuid.vmem
The virtual machine paging file, which backs up the guest main
memory on the host file system. This file exists only when the virtual
machine is running or if the virtual machine fails. It is stored in the
working directory.
snapshot_name_number.vmem
Each snapshot of a virtual machine that is powered on has an
associated .vmem file, which contains the guest operating system
main memory, saved as part of the snapshot.
.vmsd
vmname.vmsd
A centralized file for storing information and metadata about
snapshots. It is stored in the working directory.
.vmsn
vmname.Snapshot.vmsn
The snapshot state file, which stores the running state of a virtual
machine at the time you take that snapshot. It is stored in the
working directory.
vmname.Snapshot###.vmsn
The file that stores the state of a snapshot.
vmname.vmss
The suspended state file, which stores the state of a suspended
virtual machine. It is stored in the working directory.
.vmem
.vmss
Some earlier VMware products used the .std extension for
suspended state files.
Other files, such as lock files, might also be present in the virtual machines directory. Some files are present
only while a virtual machine is running.
72
VMware, Inc.
Using Virtual Machines
5
When you use virtual machines in Workstation Pro, you can transfer files and text between virtual machines
and the host system, print to host printers, connect removable devices, and change display settings. You can
use folders to manage multiple virtual machines, take snapshots to preserve virtual machine states, and
create screenshots and movies of virtual machines.
You can also use Workstation Pro to interact with remote virtual machines. See Chapter 10, “Using Remote
Connections and Sharing Virtual Machines,” on page 211 for more information.
This chapter includes the following topics:
n
“Starting Virtual Machines,” on page 73
n
“Stopping Virtual Machines,” on page 76
n
“Transferring Files and Text,” on page 80
n
“Add a Host Printer to a Virtual Machine,” on page 89
n
“Using Removable Devices in Virtual Machines,” on page 90
n
“Changing the Virtual Machine Display,” on page 96
n
“Using Folders to Manage Virtual Machines,” on page 102
n
“Taking Snapshots of Virtual Machines,” on page 105
n
“Install New Software in a Virtual Machine,” on page 111
n
“Take a Screenshot of a Virtual Machine,” on page 112
n
“Delete a Virtual Machine,” on page 113
Starting Virtual Machines
When you start a virtual machine, the guest operating system starts and you can interact with the virtual
machine. You can use Workstation Pro to start virtual machines on the host system and on remote servers.
To start a virtual machine from the command line, use the vmware command. See Chapter 16, “Using the
vmware Command,” on page 285.
n
Start a Virtual Machine on page 74
You can start a virtual machine from the VM menu or from the toolbar. When you use the VM menu,
you can select a soft or hard power option or start the virtual machine in BIOS setup mode.
n
Start a Virtual Machine That Is Running in the Background on page 75
You can start a virtual machine that is running in the background when Workstation Pro is not started.
VMware, Inc.
73
Using VMware Workstation Pro
n
Enable Autologon in a Windows Virtual Machine on page 75
With Autologon, you can save your login credentials and bypass the login dialog box when you power
on a Windows virtual machine. The guest operating system securely stores the password.
n
Enable EFI Support on page 76
Extensible Firmware Interface (EFI) is replacing BIOS as a technology that newer computers and
operating systems use to boot computers. EFI is sometimes referred to as Unified Extensible Firmware
Interface (UEFI).
Start a Virtual Machine
You can start a virtual machine from the VM menu or from the toolbar. When you use the VM menu, you
can select a soft or hard power option or start the virtual machine in BIOS setup mode.
When virtual machines are in a folder, you can perform batch power operations. See “Using Folders to
Manage Virtual Machines,” on page 102.
You can use the AutoStart feature to configure shared and remote virtual machines to start when the host
system starts. See “Configure Shared and Remote Virtual Machines to Start with the Host,” on page 223.
Prerequisites
n
If the virtual machine is on the local host, select File > Open and browse to the virtual machine
configuration (.vmx) file.
n
If the virtual machine is on a remote host, connect to the remote server. See “Connect to a Remote
Server,” on page 214.
Procedure
n
n
To select a power option when you start the virtual machine, select the virtual machine and select VM >
Power.
Option
Description
Power On
(Hard option) Workstation Pro starts the virtual machine.
Start Up Guest
(Soft option) Workstation Pro starts the virtual machine and VMware Tools
runs a script in the guest operating system. On Windows guests, if the
virtual machine is configured to use DHCP, the script renews the IP
address of the virtual machine. On a Linux, FreeBSD, or Solaris guest, the
script starts networking for the virtual machine.
Power On to firmware
Workstation Pro starts the virtual machine in BIOS setup mode.
To start the virtual machine from the toolbar, select the virtual machine and click the start button.
The start power control setting that is configured for the virtual machine determines whether
Workstation Pro performs a hard or soft power on operation. The configured behavior appears in a
tooltip when you mouse over the button.
What to do next
Click anywhere inside the virtual machine console to give the virtual machine control of the mouse and
keyboard on the host system.
74
VMware, Inc.
Chapter 5 Using Virtual Machines
Start a Virtual Machine That Is Running in the Background
You can start a virtual machine that is running in the background when Workstation Pro is not started.
Prerequisites
Set the virtual machine to run in the background. See “Closing Virtual Machines and Exiting Workstation
Pro,” on page 77.
Procedure
1
On the host system, click the virtual machine status icon that is located in the notification area of the
taskbar.
A list of the virtual machines that are running in the background appears in a tooltip. The list contains
the virtual machines that belong to the currently logged in user.
2
Select a virtual machine from the list in the tooltip.
Workstation Pro starts and displays the console view of the virtual machine.
Enable Autologon in a Windows Virtual Machine
With Autologon, you can save your login credentials and bypass the login dialog box when you power on a
Windows virtual machine. The guest operating system securely stores the password.
Use the Autologon feature if you restart the guest operating system frequently and want to avoid entering
your login credentials. You can also use the Autologon feature to grant users access to the guest operating
system without sharing your password.
Prerequisites
n
Verify that the guest operating system is Windows 2000 or later.
n
Verify that you have an existing user account to enable Autologon. The account must be a local machine
account, not a domain account.
n
Verify that the latest version of VMware Tools is running in the guest operating system.
n
Power on the virtual machine.
Procedure
1
Select the virtual machine, select VM > Settings.
2
On the Options tab, select Autologon.
3
Click Enable, type your login credentials, and click OK.
If you type an incorrect or expired password, you must type your login credentials when you power on
the virtual machine.
4
Click OK to save your changes.
When you enable Autologon or change your login credentials, the Autologon settings are saved
immediately. Clicking Cancel in the Virtual Machine Settings dialog box does not affect the changes
applied to the Autologon settings.
VMware, Inc.
75
Using VMware Workstation Pro
Enable EFI Support
Extensible Firmware Interface (EFI) is replacing BIOS as a technology that newer computers and operating
systems use to boot computers. EFI is sometimes referred to as Unified Extensible Firmware Interface
(UEFI).
You can choose to boot a virtual machine by using the EFI firmware option or select BIOS in the New Virtual
Machine wizard when you use a custom configuration.
You can specify the EFI firmware option when you create a remote virtual machine in shared virtual
machine mode.
Prerequisites
Verify that the following conditions are met:
n
The guest operating system to be installed on the virtual machine supports EFI firmware.
n
The virtual machine uses hardware version 8 or later.
n
The software to boot the system is installed.
Procedure
1
In the Workstation Pro interface, select VM > Settings.
2
Click the Options tab and click Advanced.
3
Select the Boot with EFI instead of BIOS check box.
4
Click OK.
Stopping Virtual Machines
You can use Workstation Pro to stop virtual machines on the host system and on remote servers. You can
shut down, pause, and suspend virtual machines. You can also close virtual machines and continue running
them in the background.
n
Shut Down a Virtual Machine on page 77
You can shut down a virtual machine from the VM menu or from the toolbar. When you use the VM
menu, you can select a hard or soft power option.
n
Closing Virtual Machines and Exiting Workstation Pro on page 77
You can close a virtual machine that is running on the local host system without powering it off. By
default, Workstation Pro prompts you to select an action when you close a powered-on virtual
machine and when you exit Workstation Pro while virtual machines are running on the local host
system.
n
Pause and Unpause a Virtual Machine on page 78
You can pause a virtual machine multiple times for a few seconds, or up to several minutes. The pause
feature is useful when a virtual machine is engaged in an lengthy, processor-intensive activity that
prevents you from using the host system to do a more immediate task.
n
Suspend and Resume a Virtual Machine on page 79
Use the suspend and resume feature to save the current state of a virtual machine. When you resume
the virtual machine, the applications that were running before the suspension will resume their
running state with their content unchanged.
76
VMware, Inc.
Chapter 5 Using Virtual Machines
Shut Down a Virtual Machine
You can shut down a virtual machine from the VM menu or from the toolbar. When you use the VM menu,
you can select a hard or soft power option.
You are not required to power off a virtual machine that is running on the local host system before you exit
Workstation Pro. You can exit Workstation Pro and leave the virtual machine running in the background.
See “Closing Virtual Machines and Exiting Workstation Pro,” on page 77.
When virtual machines are in a folder, you can perform batch power operations. See “Using Folders to
Manage Virtual Machines,” on page 102.
Procedure
n
n
To select a power option when you shut down the virtual machine, select the virtual machine and select
VM > Power.
Option
Description
Power Off
(Hard option) Workstation Pro powers off the virtual machine abruptly
with no consideration for work in progress.
Shut Down Guest
(Soft option) Workstation Pro sends a shut down signal to the guest
operating system. An operating system that recognizes the signal shuts
down gracefully. Not all guest operating systems respond to a shutdown
signal from Workstation Pro. If the guest operating system does not
respond to the signal, shut down from the guest operating system as you
would a physical machine.
To shut down the virtual machine from the toolbar, select the virtual machine and click the stop button.
The stop power control setting that is configured for the virtual machine determines whether
Workstation Pro performs a hard or soft power off operation. The configured behavior appears in a
tooltip when you mouse over the button.
n
To shut down a virtual machine that is suspended, select the virtual machine and click VM > Power >
Power Off.
Closing Virtual Machines and Exiting Workstation Pro
You can close a virtual machine that is running on the local host system without powering it off. By default,
Workstation Pro prompts you to select an action when you close a powered-on virtual machine and when
you exit Workstation Pro while virtual machines are running on the local host system.
Note When you close a remote virtual machine, the virtual machine tab closes. If the virtual machine is
powered on, it continues to run on the remote host.
Table 5‑1. Close and Exit Actions
Action
Description
Run in Background
Continue to run the virtual machine in the background. You can interact
with the virtual machine through VNC or some other service.
By default, a virtual machine status icon appears in the notification area
of the taskbar on the host system. When you mouse over this icon, a
tooltip shows the number of virtual machines running in the
background that belong to the currently logged in user.
Suspend
Suspend the virtual machine and save its current state.
Power Off
Power off the virtual machine. By default, Workstation Pro powers off
the virtual machine abruptly. The effect is the same as using the power
button on a physical machine.
VMware, Inc.
77
Using VMware Workstation Pro
You can configure Workstation Pro preference settings so that virtual machines always run in the
background and you are not prompted to select an action. You can also configure virtual machine option
settings to control power off behavior.
Configure Virtual Machines to Always Run in the Background
You can configure Workstation Pro preference settings so that virtual machines always run in the
background and you are not prompted to select an action when you close powered-on virtual machines.
Procedure
1
Select Edit > Preferences.
2
Select Workspace and select Keep VMs running after Workstation closes.
3
Click OK to save your changes.
Pause and Unpause a Virtual Machine
You can pause a virtual machine multiple times for a few seconds, or up to several minutes. The pause
feature is useful when a virtual machine is engaged in an lengthy, processor-intensive activity that prevents
you from using the host system to do a more immediate task.
Note You cannot pause a remote virtual machine.
Prerequisites
Familiarize yourself with the restrictions and limitations of the pause feature. See “Pause Feature
Restrictions and Limitations,” on page 78.
Procedure
n
To pause a virtual machine, select the virtual machine and select VM > Pause.
The virtual machine display dims and a play button appears over the display. Paused virtual machines
that are configured to display on more than one monitor have a play button on each monitor.
n
To pause all of the powered-on virtual machines without interacting with the Workstation Pro user
interface, right-click the virtual machine status icon located in the notification area on the task bar of the
host computer and select Pause All Virtual Machines.
n
To unpause a virtual machine, click the play button on the virtual machine display or deselect VM >
Pause.
Pause Feature Restrictions and Limitations
The pause feature has certain restrictions and limitations.
78
n
You cannot switch to Unity mode when a virtual machine is paused.
n
When paused, a virtual machine does not send or receive network packets. If a virtual machine is
paused for more than a few minutes, some network connections might be interrupted.
n
If you take a snapshot when the virtual machine is paused, the virtual machine is not paused when you
restore that snapshot. Similarly, if you suspend a virtual machine while it is paused, it is not paused
when you resume the virtual machine.
n
If you initiate soft power operations when a virtual machine is paused, those operations do not take
effect until the virtual machine is unpaused.
n
While a virtual machine is paused, LEDs and devices remain enabled, but device connection changes do
not take effect until the virtual machine is unpaused.
n
You cannot pause a remote virtual machine.
VMware, Inc.
Chapter 5 Using Virtual Machines
Suspend and Resume a Virtual Machine
Use the suspend and resume feature to save the current state of a virtual machine. When you resume the
virtual machine, the applications that were running before the suspension will resume their running state
with their content unchanged.
How quickly the suspend operation performs depends on the how much data changed after you started the
virtual machine. The first suspend operation usually takes longer than subsequent suspend operations.
When you suspend a virtual machine, Workstation Pro creates a virtual machine suspended state (.vmss
or .vmem) file set in the working directory. How quickly the resume operation performs depends on how
active the virtual machine is. The more active the virtual machine is, the longer it will take to resume. It also
depends on whether the virtual machine suspended state (.vmss or .vmem) file set is already in the physical
memory of the host system. If it is, the virtual machine will resume much faster.
After you resume a virtual machine and do more work, you cannot return to the state that the virtual
machine was in when you suspended it. To return to the same state repeatedly, you must take a snapshot.
When virtual machines are in a folder, you can perform batch power operations. See “Using Folders to
Manage Virtual Machines,” on page 102.
Procedure
n
n
To select a suspend option when you suspend a virtual machine, select the virtual machine and select
VM > Power.
Option
Description
Suspend
(Hard option) Workstation Pro suspends the virtual machine and leaves it
connected to the network.
Suspend Guest
(Soft option) Workstation Pro suspends the virtual machine and
disconnects it from the network. VMware Tools runs a script in the guest
operating system. On Windows guests, if the virtual machine is configured
to use DHCP, the script releases the IP address of the virtual machine. On
Linux, FreeBSD, and Solaris guests, the script stops networking for the
virtual machine.
To suspend a virtual machine from the toolbar, select the virtual machine and click the suspend button.
The suspend power control setting that is configured for the virtual machine determines whether
Workstation Pro performs a hard or soft suspend operation. The configured behavior appears in a
tooltip when you mouse over the button.
n
n
To select a resume option when you resume a suspended virtual machine, select the virtual machine
and select VM > Power.
Option
Description
Resume
(Hard option) Workstation Pro resumes the virtual machine from the
suspended state.
Resume Guest
(Soft option) Workstation Pro resumes the virtual machine from the
suspended state and reconnects it to the network.
To resume a virtual machine from the toolbar, select the virtual machine and click the resume button.
The suspend power control setting that is configured for the virtual machine determines whether
Workstation Pro performs a hard or soft resume operation. The configured behavior appears in a tooltip
when you mouse over the button.
n
VMware, Inc.
To power off a suspended virtual machine, select the virtual machine and click VM > Power > Power
Off.
79
Using VMware Workstation Pro
Using the Guest ACPI S1 Sleep Feature on Windows Hosts
On Windows hosts, Workstation Pro provides experimental support for guest operating system ACPI S1
sleep. Not all guest operating systems support this feature. Common guest operating system interfaces for
entering standby mode are supported.
By default, ACPI S1 sleep is implemented in Workstation Pro as suspend. You can use the Workstation Pro
Resume button to wake the guest operating system.
You can implement ACPI S1 sleep as power-on suspend. The guest operating system is not fully powered
down. This feature can be useful for test and development scenarios. You can wake the virtual machine
through keyboard input, mouse input, or by programming the CMOS external timer.
Transferring Files and Text
You can use the drag-and-drop feature, the copy and paste feature, shared folders, and mapped drives to
transfer files and text between the host system and virtual machines and between virtual machines.
n
Using the Drag-and-Drop Feature on page 80
You can use the drag-and-drop feature to move files and directories, email attachments, plain text,
formatted text, and images between the host system and virtual machines.
n
Using the Copy and Paste Feature on page 81
You can cut, copy, and paste text between virtual machines and between applications running in
virtual machines.
n
Using Shared Folders on page 82
You can use shared folders to share files among virtual machines and between virtual machines and
the host system. The directories that you add as shared folders can be on the host system, or they can
be network directories that are accessible from the host computer.
n
Mapping a Virtual Disk to the Host System on page 88
Instead of using shared folders or copying data between a virtual machine and the host system, you
can map a virtual disk to the host system. In this case, you map a virtual disk in the host file system as
a separate mapped drive. Using a mapped drive lets you connect to the virtual disk without going into
a virtual machine.
Using the Drag-and-Drop Feature
You can use the drag-and-drop feature to move files and directories, email attachments, plain text, formatted
text, and images between the host system and virtual machines.
You can drag files or directories between the following locations.
n
File managers, such as Windows Explorer, on the host system and virtual machines.
n
A file manager to an application that supports drag-and-drop.
n
Applications, such as zip file managers, which support drag-and-drop extraction of individual files.
n
Different virtual machines.
When you drag a file or folder between the host and a virtual machine, Workstation Pro copies the file or
folder to the location where you drop it. For example, if you drop a file on the desktop icon of a word
processor, the word processor opens a copy of the original file. The original file does not include changes
that you make to the copy.
Initially, the application opens a copy of the file that is stored in the temp directory. On Windows, the temp
directory is specified in the %TEMP% environment variable. On Linux and Solaris, the temp directory
is /tmp/VMwareDnD. Save the file in a different directory to protect changes that you make.
80
VMware, Inc.
Chapter 5 Using Virtual Machines
Drag-and-Drop Requirements and Restrictions
The drag-and-drop feature has certain requirements and restrictions.
n
You must install VMware Tools in a virtual machine to use the drag-and-drop feature.
n
The drag-and-drop feature requires Linux hosts and guests to run X Windows and Solaris 10 guests to
run an Xorg X server and JDS/Gnome.
n
You can drag images between applications on Windows hosts and applications on Windows guests
only. Dragging images is not supported for Linux hosts or guests.
n
You can drag files and directories, email attachments, plain text, and formatted text between Linux and
Windows hosts and Linux, Windows, and Solaris 10 guests only.
n
Dragging email attachments is restricted to images or files smaller than 4 MB.
n
Dragging plain text and formatted text (including the formatting) is restricted to amounts less than 4
MB.
n
Dragging text is restricted to text in languages that can be represented by Unicode characters.
n
Workstation Pro uses the PNG format to encode images that are dragged. Dragging images is restricted
to images smaller than 4 MB after conversion to PNG format.
Disable the Drag-and-Drop Feature
The drag-and-drop feature is enabled by default when you create a virtual machine in Workstation Pro. To
prevent dragging and dropping between a virtual machine and the host system, disable the drag-and-drop
feature.
Note You cannot enable or disable the drag-and-drop feature for a shared or remote virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Guest Isolation.
3
Deselect Enable drag and drop.
4
Click OK to save your changes.
Using the Copy and Paste Feature
You can cut, copy, and paste text between virtual machines and between applications running in virtual
machines.
You can also cut, copy, and paste images, plain text, formatted text, and email attachments between
applications running on the host system and applications running in virtual machines.
Copy and Paste Requirements and Restrictions
The copy and paste feature has certain requirements and restrictions.
n
You must install VMware Tools in a virtual machine to use the copy and paste feature.
n
The copy and paste feature works with Linux and Windows hosts and Linux, Windows, and Solaris 10
guests only.
n
The copy and paste feature requires Linux hosts and guests to run X Windows and Solaris 10 guests to
run an Xorg X server and JDS/Gnome.
n
Copying and pasting email attachments is restricted to images or files smaller than 4 MB.
VMware, Inc.
81
Using VMware Workstation Pro
n
Copying and pasting plain text and formatted text (including the formatting) is restricted to amounts
less than 4MB.
n
Copying and pasting text is restricted to text in languages that can be represented by Unicode
characters.
n
Workstation Pro uses the PNG format to encode images that are copied and pasted. Copying and
pasting images is restricted to images smaller than 4 MB after conversion to PNG format.
n
You cannot copy and paste files between virtual machines.
Disable the Copy and Paste Feature
The copy and paste feature is enabled by default when you create a virtual machine in Workstation Pro. To
prevent copying and pasting between a virtual machine and the host system, disable the copy and paste
feature.
Note You cannot enable or disable the copy and paste feature for a shared or remote virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Guest Isolation.
3
Deselect Enable copy and paste.
4
Click OK to save your changes.
Using Shared Folders
You can use shared folders to share files among virtual machines and between virtual machines and the host
system. The directories that you add as shared folders can be on the host system, or they can be network
directories that are accessible from the host computer.
Important You cannot open a file in a shared folder from more than one application at a time. For
example, do not open the same file in an application on the host operating system and in another
application in the guest operating system. If one of the applications writes to the file, data might be
corrupted.
n
Guest Operating Systems That Support Shared Folders on page 83
To use shared folders, a virtual machine must have a supported guest operating system.
n
Enable a Shared Folder for a Virtual Machine on page 83
You can enable folder sharing for a specific virtual machine. To set up a folder for sharing between
virtual machines, you must configure each virtual machine to use the same directory on the host
system or network share.
n
Enable Shared Folders for Virtual Machines Created By Other Users on page 85
If a shared folder is not created by the user who powers on the virtual machine, it is disabled by
default. This is a security precaution.
n
View Shared Folders in a Windows Guest on page 85
In a Windows guest operating system, you can view shared folders by using desktop icons.
n
Mounting Shared Folders in a Linux Guest on page 85
After you have enabled a shared folder, you can mount one or more directories or subdirectories in the
shared folder to any location in the file system in addition to the default location of /mnt/hgfs.
82
VMware, Inc.
Chapter 5 Using Virtual Machines
n
Change Shared Folder Properties on page 87
After you create a shared folder, you can change the folder name, the host path, and other attributes.
n
Change the Folders That a Virtual Machine Can Share on page 87
You can change the folders that a specific virtual machine is allowed to share.
n
Disable Folder Sharing for a Virtual Machine on page 87
You can disable folder sharing for a specific virtual machine.
Guest Operating Systems That Support Shared Folders
To use shared folders, a virtual machine must have a supported guest operating system.
The following guest operating systems support shared folders.
n
Windows Server 2003 R2
n
Windows Server 2008 R2
n
Windows Server 2012 R2
n
Windows Vista
n
Windows 7
n
Windows 8
n
Windows 10
n
Linux with a kernel version of 2.6 or later
n
Solaris x86 10
n
Solaris x86 10 Update 1 and later
Enable a Shared Folder for a Virtual Machine
You can enable folder sharing for a specific virtual machine. To set up a folder for sharing between virtual
machines, you must configure each virtual machine to use the same directory on the host system or network
share.
Note You cannot enable a shared folder for a shared or remote virtual machine.
Prerequisites
n
Verify that the virtual machines use a guest operating system that supports shared folders. See “Guest
Operating Systems That Support Shared Folders,” on page 83.
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that permission settings on the host system allow access to files in the shared folders. For
example, if you are running Workstation Pro as a user named User, the virtual machine can read and
write files in the shared folder only if User has permission to read and write them.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Shared Folders.
VMware, Inc.
83
Using VMware Workstation Pro
3
4
Select a folder sharing option.
Option
Description
Always enabled
Keep folder sharing enabled, even when the virtual machine is shut down,
suspended, or powered off.
Enabled until next power off or
suspend
Enable folder sharing temporarily, until you power off, suspend, or shut
down the virtual machine. If you restart the virtual machine, shared
folders remain enabled. This setting is available only when the virtual
machine is powered on.
(Optional) To map a drive to the Shared Folders directory, select Map as a network drive in Windows
guests.
This directory contains all of the shared folders that you enable. Workstation Pro selects the drive letter.
5
Click Add to add a shared folder.
On Windows hosts, the Add Shared Folder wizard starts. On Linux hosts, the Shared Folder Properties
dialog box opens.
6
Type the path on the host system to the directory to share.
If you specify a directory on a network share, such as D:\share, Workstation Pro always attempts to use
that path. If the directory is later connected to the host on a different drive letter, Workstation Pro
cannot locate the shared folder.
7
Specify the name of the shared folder as it should appear inside the virtual machine.
Characters that the guest operating system considers illegal in a share name appear differently when
viewed inside the guest. For example, if you use an asterisk in a share name, you see %002A instead of *
in the share name on the guest. Illegal characters are converted to their ASCII hexadecimal value.
8
9
Select shared folder attributes.
Option
Description
Enable this share
Enable the shared folder. Deselect this option to disable a shared folder
without deleting it from the virtual machine configuration.
Read-only
Make the shared folder read-only. When this property is selected, the
virtual machine can view and copy files from the shared folder, but it
cannot add, change, or remove files. Access to files in the shared folder is
also governed by permission settings on the host computer.
Click Finish to add the shared folder.
The shared folder appears in the Folders list. The check box next to folder name indicates that the folder
is being shared. You can deselect this check box to disable sharing for the folder.
10
Click OK to save your changes.
What to do next
View the shared folder. On Linux guests, shared folders appear under /mnt/hgfs. On Solaris guests, shared
folders appear under /hgfs. To view shared folders on a Windows guest, see “View Shared Folders in a
Windows Guest,” on page 85.
84
VMware, Inc.
Chapter 5 Using Virtual Machines
Enable Shared Folders for Virtual Machines Created By Other Users
If a shared folder is not created by the user who powers on the virtual machine, it is disabled by default.
This is a security precaution.
Folder sharing is also disabled by default for Workstation 5.x virtual machines, regardless of who creates the
folder.
Important Enabling shared folders on all virtual machines can pose a security risk because a shared folder
might enable existing programs inside the virtual machine to access the host file system without your
knowledge.
Procedure
1
Select Edit > Preferences.
2
Select Workspace and select Enable all shared folders by default.
This setting applies to shared folders on all virtual machines that are created by other users.
View Shared Folders in a Windows Guest
In a Windows guest operating system, you can view shared folders by using desktop icons.
Note If the guest operating system has VMware Tools from Workstation 4.0, shared folders appear as
folders on a designated drive letter.
Procedure
n
Depending on the Windows operating system version, look for VMware Shared Folders in My
Network Places, Network Neighborhood, or Network.
n
If you mapped the shared folder as a network drive, open My Computer and look for Shared Folders
on 'vmware-host' under Network Drives.
n
To view a specific shared folder, go directly to the folder by using the UNC path \\vmware-
host\Shared Folders\shared_folder_name.
Mounting Shared Folders in a Linux Guest
After you have enabled a shared folder, you can mount one or more directories or subdirectories in the
shared folder to any location in the file system in addition to the default location of /mnt/hgfs.
Use the mount command to mount all shares, one share, or a subdirectory within a share to any location in
the file system.
Table 5‑2. Mount Command Syntax
Command
Description
mount -t vmhgfs .host:/ /home/user1/shares
Mounts all shares to /home/user1/shares
mount -t vmhgfs .host:/foo /tmp/foo
Mounts the share named foo to /tmp/foo
mount -t vmhgfs .host:/foo/bar /var/lib/bar
Mounts the subdirectory bar within the share
foo to /var/lib/bar
You can use VMware-specific options in addition to the standard mount syntax. For usage information for
the host-guest file system options, type the command /sbin/mount.vmhgfs -h.
VMware, Inc.
85
Using VMware Workstation Pro
When you install VMware Tools, an entry is made to etc/fstab to specify the location of shared folders. You
can edit this file to change or add entries. For example, to auto-mount at startup, edit /etc/fstab and add
the line:
.host:/ /mnt/hgfs vmhgfs defaults 0 0
The VMware Tools services script loads a driver that performs the mount. If the mount fails, a message
appears regarding mounting HGFS shares.
Note The mount can fail if shared folders are disabled or if the share does not exist. You are not prompted
to run the VMware Tools vmware-config-tools.pl configuration program again.
Optimizing Read and Write Access to Shared Files on Linux
Host-guest file sharing is integrated with the guest page cache. Files in shared folders are cached for reading
and can be written to asynchronously.
Files that are being actively written to from the guest do not experience read caching benefits. To improve
performance, you can use the mount command time-to-live (ttl) option to specify the interval that the hostguest file system (hgfs) driver uses for validating file attributes.
For example, to validate attributes every 3 seconds instead of every 1 second, which is the default, use the
following command.
mount -o ttl=3 -t vmhgfs .host:/sharemountpoint
Note Lengthening the interval involves some risk. If a process in the host modifies file attributes, the guest
operating system might not get the modifications as quickly and the file can become corrupted.
Using Permissions to Restrict Access to Shared Files in a Linux Guest
You can use permissions to restrict access to the files in a shared folder on a Linux guest operating system.
On a Linux host, if you create files that you want to share with a Linux guest operating system, the file
permissions shown on the guest operating system are the same as the permissions on the host system. You
can use the fmask and dmask commands to mask permissions bits for files and directories.
If you create files on a Windows host system that you want to share with a Linux guest operating system,
read-only files are displayed as having read and execute permission for everyone and other files are shown
as fully writable by everyone.
If you use a Linux guest operating system to create files for which you want to restrict permissions, use the
mount program with the following options in the guest operating system.
n
uid
n
gid
n
fmask
n
dmask
n
ro (read only)
n
rw (read-write)
rw is the default.
If you are using a virtual machine that was created with the Windows version of Workstation Pro, or a
previous release of the Linux version of Workstation Pro, you can change the owner permissions only.
86
VMware, Inc.
Chapter 5 Using Virtual Machines
Change Shared Folder Properties
After you create a shared folder, you can change the folder name, the host path, and other attributes.
Prerequisites
Create a shared folder. See “Enable a Shared Folder for a Virtual Machine,” on page 83.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Shared Folders.
3
Select the shared folder in the folders list and click Properties.
4
To change the name of the shared folder as it appears inside the virtual machine, type the new name in
the Name text box.
Characters that the guest operating system considers illegal in a share name appear differently when
viewed inside the guest. For example, if you use an asterisk in a share name, you see %002A instead of *
in the share name on the guest. Illegal characters are converted to their ASCII hexadecimal value.
5
To change the host path for the shared folder, browse to or type the new path in the Host path text box.
If you specify a directory on a network share, such as D:\share, Workstation Pro always attempts to use
that path. If the directory is later connected to the host on a different drive letter, Workstation Pro
cannot locate the shared folder.
6
7
To change an attribute for the shared folder, select or deselect the attribute.
Option
Description
Enabled
Enable the shared folder. Deselect this option to disable a shared folder
without deleting it from the virtual machine configuration.
Read-only
Make the shared folder read-only. When this property is selected, the
virtual machine can view and copy files from the shared folder, but it
cannot add, change, or remove files. Access to files in the shared folder is
also governed by permission settings on the host computer.
Click OK to save your changes.
Change the Folders That a Virtual Machine Can Share
You can change the folders that a specific virtual machine is allowed to share.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Shared Folders.
3
In the folders list, select the check boxes next to the folders to share and deselect the check boxes next to
the folders to disable.
4
Click OK to save your changes.
Disable Folder Sharing for a Virtual Machine
You can disable folder sharing for a specific virtual machine.
Procedure
1
VMware, Inc.
Select the virtual machine and select VM > Settings.
87
Using VMware Workstation Pro
2
On the Options tab, select Shared Folders.
3
Select Disabled to disable folder sharing.
4
Click OK to save your changes.
Mapping a Virtual Disk to the Host System
Instead of using shared folders or copying data between a virtual machine and the host system, you can
map a virtual disk to the host system. In this case, you map a virtual disk in the host file system as a separate
mapped drive. Using a mapped drive lets you connect to the virtual disk without going into a virtual
machine.
Map or Mount a Virtual Disk to a Drive on the Host System
When you map a virtual disk and its associated volume to a drive on the host system, you can connect to the
virtual disk without opening a virtual machine.
After you map the virtual disk to a drive on the host system, you cannot power on any virtual machine that
uses the disk until you disconnect the disk from the host system.
Note You cannot map a virtual hard disk for a shared or remote virtual machine.
Important If you mount a virtual disk that has a snapshot and then write to the disk, you can irreparably
damage a snapshot or linked clone created from the virtual machine.
Prerequisites
n
Power off all virtual machines that use the virtual disk.
n
Verify that the virtual disk (.vmdk) files on the virtual disk are not compressed and do not have readonly permissions.
n
Verify that the virtual disk is unencrypted. You cannot map or mount encrypted disks.
Procedure
1
2
3
Mount the virtual disk to a drive on the host system.
Option
Description
Windows host
Select File > Map Virtual Disks.
Linux host
Select File > Mount Virtual Disks.
Map or mount the virtual disk.
Option
Description
Windows host
In the Map or Disconnect Virtual Disks dialog box, click Map.
Linux host
In the Mount or Unmount Virtual Disks dialog box, click Mount Disk.
(Optional) You can also map a virtual disk from Windows Explorer.
a
Open Explorer and browse to the .vmdk file you want to map.
b
Right-click the .vmdk file and select Map Virtual Disk.
The menu also allows you to map the first volume of the .vmdk file to a drive immediately. If you
select that option, no further configurations are needed.
88
4
Browse to a virtual disk (.vmdk) file, select it, and click Open.
5
Select the volume to map or mount and select an unused drive letter on the host system.
VMware, Inc.
Chapter 5 Using Virtual Machines
6
Click OK or Mount.
The drive appears on the host system. You can read from or write to files on the mapped virtual disk on
the host system.
7
(Optional) View the mapped or mounted drive.
Option
Description
Windows host
Select File > Map Virtual Disks. A list of mapped drives displays.
Linux host
Select File > Mount Virtual Disks. A list of mounted drives displays.
Disconnect a Virtual Disk from the Host System
To use a virtual disk from a virtual machine after it has been mapped or mounted on the host system, you
must disconnect it from the host system.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Hard Disk, click Utilities, and select Disconnect.
You can now power on any virtual machine that uses this disk.
Add a Host Printer to a Virtual Machine
You can print from a virtual machine to any printer available to the host computer without having to install
additional drivers in the virtual machine.
The Workstation Pro printer feature uses ThinPrint technology to replicate the host system printer mapping
in the virtual machine. When you enable the virtual machine printer, Workstation Pro configures a virtual
serial port to communicate with the host printers.
Note You cannot add a printer to a shared or remote virtual machine.
Prerequisites
n
Support for virtual printers is disabled by default. To enable virtual printer support, see “Configuring
Virtual Printers on Windows Hosts,” on page 245.
n
The virtual machine must be powered on or off. You cannot add a printer to a virtual machine in
suspended state.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Add.
3
In the Add Hardware wizard, select Printer and Finish.
The default device setting is to connect the virtual machine printer when the virtual machine is
powered on.
What to do next
In a Print window, when you attempt to select a printer in Windows 7 virtual machines, you might see only
the default printer, even though other printers are available. To see the other printers, right-click the default
printer and point to Printer properties.
VMware, Inc.
89
Using VMware Workstation Pro
Using Removable Devices in Virtual Machines
You can use removable devices such as floppy drives, DVD and CD-ROM drives, USB devices, and smart
card readers in virtual machines.
Some devices cannot be used by the host system and a guest operating system, or by multiple guest
operating systems, simultaneously.
For example, if the host system is using a floppy drive, you must connect the floppy drive to the virtual
machine before you can use it in the virtual machine. To use the floppy drive on the host again, you must
disconnect it from the virtual machine. By default, a floppy drive is not connected when a virtual machine
powers on.
Use a Removable Device in a Virtual Machine
You can connect and disconnect removable devices in a virtual machine. You can also change the settings for
a removable device by modifying virtual machine settings.
Prerequisites
n
Power on the virtual machine.
n
If you are connecting or disconnecting a USB device, familiarize yourself with the way Workstation Pro
handles USB devices. See “Connecting USB Devices to Virtual Machines,” on page 90.
Procedure
n
To connect a removable device, select the virtual machine, select VM > Removable Devices, select the
device, and select Connect.
If the device is connected to the host system through a USB hub, the virtual machine sees only the USB
device, not the hub.
A check mark appears next to the name of the device when the device is connected to the virtual
machine and a device icon appears on the virtual machine taskbar.
n
To change the settings for a removable device, select VM > Removable Devices, select the device, and
select Settings.
n
To disconnect a removable device, select the virtual machine, select VM > Removable Devices, select
the device, and select Disconnect.
You can also disconnect the device by clicking or right-clicking the device icon on the virtual machine
taskbar. Using the taskbar icon is especially useful if you run the virtual machine in full screen mode.
Connecting USB Devices to Virtual Machines
When a virtual machine is running, its window is the active window. If you plug a USB device into the host
system, the device connects to the virtual machine instead of the host by default. If a USB device connected
to the host system does not connect to a virtual machine at power on, you must manually connect the device
to the virtual machine.
When you connect a USB device to a virtual machine, Workstation Pro retains the connection to the affected
port on the host system. You can suspend or power off the virtual machine, or unplug the device. When you
plug in the device again or resume the virtual machine, Workstation Pro reconnects the device.
Workstation Pro retains the connection by writing an autoconnect entry to the virtual machine configuration
(.vmx) file.
90
VMware, Inc.
Chapter 5 Using Virtual Machines
If Workstation Pro cannot reconnect to the device, for example, because you disconnected the device, the
device is removed and Workstation Pro displays a message to indicate that it cannot connect to the device.
You can connect to the device manually if it is still available. To manually connect a USB device to the virtual
machine, select VM > Removable Devices > Device Name > Connect (Disconnect from host).
Follow the device manufacturer's procedures for unplugging the device from the host computer when you
physically unplug the device, move the device from host system to a virtual machine, move the device
between virtual machines, or move the device from a virtual machine to the host computer. Following these
procedures is especially important for data storage devices, such as zip drives. If you move a data storage
device too soon after saving a file and the operating system did not actually write the data to the disk, you
can lose data.
n
Installing USB Drivers on Windows Hosts on page 91
When a particular USB device is connected to a virtual machine for the first time, the host detects it as
a new device named VMware USB Device and installs the appropriate VMware driver.
n
Disable Automatic Connection of USB Devices on page 91
You can disable the autoconnect feature if you do not want USB devices to connect to a virtual
machine when you power it on.
n
Mount the USB File System on a Linux Host on page 92
On Linux hosts, Workstation Pro uses the USB device file system to connect to USB devices. If the USB
device file system is not located in /proc/bus/usb, you must mount the USB file system to that
location.
n
Connect USB HIDs to a Virtual Machine on page 92
To connect USB human interface devices (HIDs) to a virtual machine, you must configure the virtual
machine to show all USB input devices in the Removable Devices menu.
n
Install a PDA Driver and Synchronize With a Virtual Machine on page 92
To install a PDA driver in a virtual machine, you must synchronize the PDA with the virtual machine.
Installing USB Drivers on Windows Hosts
When a particular USB device is connected to a virtual machine for the first time, the host detects it as a new
device named VMware USB Device and installs the appropriate VMware driver.
The Windows operating system prompts you to run the Microsoft Windows Found New Hardware wizard.
Select the default action to install the software automatically. After the software is installed, the guest
operating system detects the USB device and searches for a suitable driver.
Disable Automatic Connection of USB Devices
You can disable the autoconnect feature if you do not want USB devices to connect to a virtual machine
when you power it on.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select USB Controller.
3
Deselect Automatically connect new USB devices to disable automatic connection of USB devices.
4
Click OK to save your changes.
VMware, Inc.
91
Using VMware Workstation Pro
Mount the USB File System on a Linux Host
On Linux hosts, Workstation Pro uses the USB device file system to connect to USB devices. If the USB
device file system is not located in /proc/bus/usb, you must mount the USB file system to that location.
Important Do not attempt to add a USB drive device node directory, for example, /dev/sda, to the virtual
machine as a hard disk.
Prerequisites
Verify that you have root access to the host system.
Procedure
1
As root, mount the USB file system.
mount -t usbfs none /proc/bus/usb
2
Connect the USB device to the host system.
Connect USB HIDs to a Virtual Machine
To connect USB human interface devices (HIDs) to a virtual machine, you must configure the virtual
machine to show all USB input devices in the Removable Devices menu.
By default, USB HIDs, such as USB 1.1 and 2.0 mouse and keyboard devices, do not appear in the
Removable Devices menu in a virtual machine, even though they are plugged in to USB ports on the host
system.
An HID that is connected to a virtual machine is not available to the host system.
Note You cannot configure a shared or remote virtual machine to show all USB input devices.
Prerequisites
n
Power off the virtual machine.
n
If you are using a KVM switch for a mouse or keyboard, disable automatic connection of USB devices.
See “Disable Automatic Connection of USB Devices,” on page 91.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select USB Controller.
3
Select Show all USB input devices.
This option allows users to use special USB HIDs inside the virtual machine.
4
Click OK to save your changes.
5
Power on the virtual machine.
HIDs appear in the Removable Devices menu.
Install a PDA Driver and Synchronize With a Virtual Machine
To install a PDA driver in a virtual machine, you must synchronize the PDA with the virtual machine.
Procedure
1
Connect the PDA to the host system and synchronize it with the host system.
The PDA driver should begin installing in the virtual machine.
92
VMware, Inc.
Chapter 5 Using Virtual Machines
2
Allow the virtual machine to install the PDA driver.
3
If connection warning messages appear, dismiss them.
4
If the PDA disconnects from the host system before the virtual machine can synchronize with it,
synchronize the PDA with the host system again.
The total time required to load the VMware USB device driver in the host system and install the PDA
driver in the virtual machine might exceed the device connection timeout value. A second
synchronization attempt usually succeeds.
Troubleshooting USB Device Control Sharing
Only the host system or the virtual machine can have control of a particular USB device at any one time.
Device control operates differently, depending on whether the host system is a Linux or a Windows
computer.
When you connect a device to a virtual machine, it is disconnected from the host system or from the virtual
machine that previously had control of the device. When you disconnect a device from a virtual machine, it
is returned to the host system.
Under some circumstances, if a USB storage device is in use on the host system, for example, one or more
files stored on the device are open on the host, an error appears in the virtual machine when you try to
connect to the device. You must let the host system complete its operation or close any application
connected to the device on the host system and connect to the device in the virtual machine again.
Troubleshoot USB Device Control Issues on a Linux Host
You have problems connecting or disconnecting USB devices on a Linux host system.
Problem
You are prompted to disconnect the driver on the host system when you connect a USB device to the virtual
machine or disconnecting the device fails.
Cause
On Linux host systems, guest operating systems can use devices that are not claimed by a host operating
system driver. A related issue sometimes affects devices that rely on automatic connection, such as PDAs.
Occasionally, even if you successfully use autoconnection to connect the device to the virtual machine, you
might experience problems with the connection to the device.
Solution
1
If you have problems with autoconnection, perform these steps.
a
Select the virtual machine and select VM > Removable Devices to disconnect and reconnect the
device.
b
If the problem persists, unplug the device and plug it in again.
c
If a warning message indicates that the device is in use, disable the device in the hotplug
configuration files in the /etc/hotplug directory.
The documentation for the Linux distribution contains information on editing these configuration
files.
VMware, Inc.
93
Using VMware Workstation Pro
2
If disconnection fails, either disable the driver or unload the driver manually.
Option
Description
Disable the driver
If the driver was automatically loaded by hotplug, disable it in the hotplug
configuration files in the /etc/hotplug directory. See the documentation
for your Linux distribution for information on editing these configuration
files.
Unload the driver manually
Become root (su -) and use the rmmod command.
Using Smart Cards in Virtual Machines
Virtual machines can connect to smart card readers that interface to serial ports, parallel ports, USB ports,
PCMCIA slots, and PCI slots. A virtual machine considers a smart card reader to be a type of USB device.
A smart card is a plastic card that has an embedded computer chip. Many government agencies and large
enterprises use smart cards to send secure communication, digitally sign documents, and authenticate users
who access their computer networks. Users plug a smart card reader into their computer and insert their
smart card in the reader. They are then prompted for their PIN to log in.
You can select a smart card reader from the Removable Devices menu in a virtual machine. A smart card
can be shared between virtual machines, or between the host system and one or more virtual machines.
Sharing is enabled by default.
When you plug a smart card reader into the host system, the reader appears as two separate USB devices in
Workstation Pro. This is because you can use smart cards in one of two mutually exclusive modes.
Shared mode
(Recommended) The smart card reader device is available as Shared
smart_card_reader_model in the Removable Devices menu. In Windows XP
guest operating systems, the shared reader appears as USB Smart Card
Reader after it is connected to the virtual machine. In Windows Vista and
Windows 7 guest operating systems, the generic smart card reader device
name appears under the Windows Device Manager list. The smart card
reader can be shared among applications on the host system and among
applications in different guest operating systems.
USB passthrough mode
The smart card reader device is available as smart_card_reader_model in the
Removable Devices menu. In USB passthrough mode, a single virtual
machine directly controls the physical smart card reader. A USB passthrough
smart card reader cannot be used by applications on the host system or by
applications in other virtual machines. You should use USB passthrough
mode only if connection in shared mode does not work well for your
scenario. You might need to install the driver provided by the manufacturer
to use USB passthrough mode.
You can use smart cards with Windows operating systems and most Linux distributions. VMware provides
full smart card support for Windows virtual machines running on Linux hosts. Using smart cards in Linux
typically requires third-party software to effectively authenticate to a domain or enable secure
communications.
Note Although smart cards should work with common Linux browsers, email applications, and directory
services, these products have not been tested or certified by VMware.
94
VMware, Inc.
Chapter 5 Using Virtual Machines
Use a Smart Card in a Virtual Machine
You can configure a virtual machine to use the smart card reader on the host system.
Prerequisites
n
Verify that the virtual machine has a USB controller. A USB controller is required, regardless of whether
the smart card reader is a USB device. A USB controller is added by default when you create a virtual
machine.
n
Connect the smart card reader to the host system.
n
Start the virtual machine
Procedure
n
To connect the smart card reader to the virtual machine, select the virtual machine and select VM >
Removable Devices > Shared <smart_card_reader_model> > Connect.
If the smart card reader is a USB device, two items appear for it in the menu. Both items use the model
name of the reader, but one item name begins with Shared.
n
To disconnect the smart card reader from the virtual machine, select VM > Removable Devices >
Shared <smart_card_reader_model> > Disconnect.
n
To remove the smart card from the virtual machine, select VM > Removable Devices > Shared
<smart_card_reader_model> > Remove Smart Card.
The smart card is removed from the virtual machine, but it remains connected on the host system. If the
smart card is physically removed from the smart card reader, this option is disabled.
n
To insert the smart card to the virtual machine, select VM > Removable Devices > Shared
<smart_card_reader_model> > Insert Smart Card.
If the smart card is physically inserted in the smart card reader, the smart card is also inserted in the
virtual machine.
Disable Smart Card Sharing
By default, you can share a smart card between virtual machines or between the host system and one or
more virtual machines. You might want to disable smart card sharing if you are using a PCMCIA smart card
reader, deploying virtual machines for enterprise use and do not want to support drivers for various smart
card readers, or the host system has drivers but the virtual machines do not.
The setting that controls smart card sharing is located in the Workstation Pro global configuration file.
Procedure
1
2
Find the global configuration file on the host system.
Operating System
Location
Windows Server 2008 R2, Windows
Server 2012 R2, Windows 7,
Windows 8, Windows 10 hosts
%PROGRAMDATA%\VMware\VMware Workstation\config.ini
Linux hosts
/etc/vmware/config
If the global configuration file does not yet exist on the host system, select Edit > Preferences and
change at least one Workstation Pro preference setting.
Workstation Pro creates the global configuration file when you change Workstation Pro preference
settings.
VMware, Inc.
95
Using VMware Workstation Pro
3
Open the global configuration file in a text editor and set the usb.ccid.useSharedMode property to FALSE.
For example: usb.ccid.useSharedMode = "FALSE"
4
Save and close the global configuration file.
5
Set permissions on the global configuration file so that other users cannot change it.
Switch to a Virtual Smart Card Reader on a Linux Host
Because of the way smart card reader functionality is implemented on Linux hosts, you must exit
Workstation Pro and restart the pcscd daemon on the host system before you can switch from the nonvirtual smart card reader to the virtual smart card reader.
Procedure
1
Select the virtual machine, select VM > Removable Devices, select the smart card reader, and select
Disconnect.
2
Power off the virtual machine and exit Workstation Pro.
3
Physically disconnect the smart card reader from the host system.
4
Restart the pcscd daemon on the host system.
5
Physically connect the smart card reader to the host system.
6
Start Workstation Pro and start the virtual machine.
7
Select the virtual machine, select VM > Removable Devices, select the smart card reader, and select
Connect.
Changing the Virtual Machine Display
You can change the way Workstation Pro displays virtual machines and virtual machine applications. You
can use full screen mode to make the virtual machine display fill the screen and use multiple monitors.
You can also match the Workstation Pro console with the guest operating system display size.
n
Use Full Screen Mode on page 97
In full screen mode, the virtual machine display fills the screen and you cannot see the borders of the
Workstation Pro window.
n
Use Exclusive Mode on page 98
Like full screen mode, exclusive mode causes the Workstation Pro virtual machine display to fill the
screen. You might want to use exclusive mode to run graphics-intensive applications, such as games,
in full screen mode.
n
Use Unity Mode on page 98
You can switch virtual machines that have Windows XP or later guest operating systems to Unity
mode to display applications directly on the host system desktop.
n
Use Multiple Monitors for One Virtual Machine on page 99
If the host system has multiple monitors, you can configure a virtual machine to use multiple
monitors. You can use the multiple-monitor feature when the virtual machine is in full screen mode.
n
Use Multiple Monitors for Multiple Virtual Machines on page 100
If the host system has multiple monitors, you can run a different virtual machine on each monitor.
n
Fit the Workstation Pro Console to the Guest Operating System Display on page 100
You can control the size of the virtual machine display and match the Workstation Pro console with
the display size of the guest operating system for an active virtual machine.
96
VMware, Inc.
Chapter 5 Using Virtual Machines
Use Full Screen Mode
In full screen mode, the virtual machine display fills the screen and you cannot see the borders of the
Workstation Pro window.
You can configure the guest operating system to report battery information. This feature is useful when you
run a virtual machine in full screen mode on a laptop. See “Report Battery Information in the Guest,” on
page 97.
Prerequisites
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that the guest operating system display mode is larger than the host system display mode. If the
guest operating system display mode is smaller than the host system display mode, you might not be
able to enter full screen mode. If you cannot enter full screen mode, add the line
mks.maxRefreshRate=1000 to the virtual machine configuration (.vmx) file.
n
Power on the virtual machine.
n
If you have multiple monitors, move the Workstation Pro window onto the monitor to use for full
screen mode.
Procedure
n
To enter full screen mode, select the virtual machine and select View > Full Screen.
n
Press Ctrl+Alt+right arrow to switch to the next powered-on virtual machine and Ctrl+Alt+left arrow to
switch to the previous powered-on virtual machine.
n
When in full screen mode, you can also use the tabs on the full screen toolbar to switch between
powered-on virtual machines.
n
To hide the full screen toolbar while you are using full screen mode, click the push pin icon on the full
screen toolbar and move the mouse pointer off of the toolbar.
The toolbar is unpinned and slides up to the top of the monitor and disappears.
n
To show the full screen toolbar after it has been hidden, point to the top of the screen until the toolbar
appears and click the push pin icon.
n
To exit full screen mode, on the full screen toolbar select View > Full Screen, and deselect Full Screen.
Report Battery Information in the Guest
If you run a virtual machine on a laptop in full screen mode, configure the option to report battery
information in the guest so that you can determine when the battery is running low.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Power.
3
Select Report battery information to guest.
4
Click OK to save your changes.
VMware, Inc.
97
Using VMware Workstation Pro
Use Exclusive Mode
Like full screen mode, exclusive mode causes the Workstation Pro virtual machine display to fill the screen.
You might want to use exclusive mode to run graphics-intensive applications, such as games, in full screen
mode.
Exclusive mode has certain advantages and limitations.
n
The full screen toolbar is not engaged when you move the mouse to the top of the screen. To configure
virtual machine settings, you must exit exclusive mode.
n
When input is grabbed by the virtual machine, only the ungrab shortcut is respected. You can change
the ungrab shortcut to reduce the chance of unintentionally pressing it.
n
On a Windows host, exclusive mode does not use multiple monitors.
Prerequisites
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Power on the virtual machine.
n
If you have multiple monitors, move the Workstation Pro window onto the monitor to use for exclusive
mode.
n
Enter full screen mode. See “Use Full Screen Mode,” on page 97.
Procedure
1
Enter full screen mode.
2
Select View > Exclusive Mode from the full screen toolbar.
What to do next
To exit exclusive mode, press Ctrl+Alt.
On a Windows or Linux host, pressing Ctrl+Alt returns you to full screen mode.
Use Unity Mode
You can switch virtual machines that have Windows XP or later guest operating systems to Unity mode to
display applications directly on the host system desktop.
In Unity mode, virtual machine applications appear on the host system desktop, you can use the virtual
machine Start or Applications menu from the host system, and the virtual machine console view is hidden.
Items for open virtual machine applications appear on the host system taskbar in the same way as open host
applications.
On host system and virtual machine applications that are displayed in Unity mode, you can use keyboard
shortcuts to copy, cut, and paste images, plain text, formatted text, and email attachments between
applications. You can also drag and drop and copy and paste files between the host system and the guest
operating system.
If you save a file or attempt to open a file from an application in Unity mode, the file system you see is the
file system inside the virtual machine. You cannot open a file from the host operating system or save a file to
the host operating system.
For some guest operating systems, application windows in Unity mode can appear only on the monitor that
is set as the primary display when you have multiple monitors. If the host and guest operating systems are
Windows XP or later, the application windows can appear on additional monitors.
98
VMware, Inc.
Chapter 5 Using Virtual Machines
Unity mode is not available in full screen mode on Windows.
Note You cannot use Unity mode with a remote virtual machine.
Prerequisites
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that the guest operating system is Windows XP or later.
n
Power on the virtual machine.
n
If you are entering Unity mode, open applications in the virtual machine to use in Unity mode.
Procedure
n
To enter Unity mode, select the virtual machine and select View > Unity.
The console view in the
Workstation Pro
window is hidden, and open applications appear in application windows on the host system desktop. A
check mark appears next to Unity in the View menu.
n
To navigate between multiple Start or Applications menus when multiple virtual machines are in
Unity mode, press the arrow keys, Tab, or Shift+Tab to cycle through the virtual machine menus and
press Enter and the spacebar to select a virtual machine.
n
To exit Unity mode, select View > Unity and deselect Unity.
Use Multiple Monitors for One Virtual Machine
If the host system has multiple monitors, you can configure a virtual machine to use multiple monitors. You
can use the multiple-monitor feature when the virtual machine is in full screen mode.
Note You do not need to use the Windows display properties settings in a Windows guest operating
system to configure multiple monitors.
Prerequisites
n
Verify that the virtual machine is a Workstation 6.x or later virtual machine.
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that the Windows or Linux guest operating system is supported.
Procedure
1
Select the virtual machine and select View > Autosize > Autofit Guest to verify that the virtual machine
can resize correctly.
2
Power on the virtual machine and select View > Full Screen.
3
On the full screen toolbar, click the Cycle Multiple Monitors button.
On a Windows host, you can mouse over a button on the toolbar to see its name. The guest operating
system desktop extends to the additional monitor or monitors.
4
(Optional) Click the Cycle Multiple Monitors button again if the host system has more than two
monitors and you want the virtual machine to use all of the monitors.
The order in which the virtual machine uses the monitors depends on the order in which the monitors
were added to the host operating system. If you continue to click the button, you return to fewer
monitors.
VMware, Inc.
99
Using VMware Workstation Pro
Limitations for Mutiple Monitors
The use of more than two monitors with a virtual machine has certain limitations.
n
If you attempt to use more than two monitors with a virtual machine, your virtual machine must
support more than two monitors for this feature to function.
n
More than two monitors is supported on Windows and Linux host and guest operating systems.
n
Windows XP guests support more than three monitors. However, only three monitors can be in use by a
Windows XP guest at one time. If more than three monitors are connected to a Windows XP guest, use
the Cycle multiple monitors button to cycle through the monitors to the configuration you want to use.
Use Multiple Monitors for Multiple Virtual Machines
If the host system has multiple monitors, you can run a different virtual machine on each monitor.
Prerequisites
Verify that the latest version of VMware Tools is installed in the guest operating system.
Procedure
1
Open a second Workstation Pro window.
Option
Description
Open a new window from
Workstation Pro
Select File > New Window. On Linux hosts, the windows operate in a
single Workstation Pro process.
(Linux hosts only) Run a separate
Workstation Pro process in a
different X server
Use the vmware command with the -W flag, for example, vmware -W &.
2
Start one or more virtual machines in each Workstation Pro window.
3
Drag each Workstation Pro window to the monitor on which you want to use it.
If a virtual machine is running in one Workstation Pro window and you want to run that virtual
machine in another Workstation Pro window, you must close the virtual machine in the first window
before you attempt to open it in the other window.
4
To switch mouse and keyboard input from the virtual machine on the first monitor to the virtual
machine on the second monitor, move the pointer from one screen to the other screen and click inside
the second monitor.
Fit the Workstation Pro Console to the Guest Operating System Display
You can control the size of the virtual machine display and match the Workstation Pro console with the
display size of the guest operating system for an active virtual machine.
The fit options are redundant if the corresponding Autofit option is active because the console and the guest
operating system display are the same size.
Prerequisites
100
n
For a Linux virtual machine, familiarize yourself with the considerations for resizing displays. See
“Considerations for Resizing Displays in Linux Virtual Machines,” on page 101.
n
For a Solaris virtual machine, familiarize yourself with the considerations for resizing displays. See
“Considerations for Resizing Displays in Solaris Virtual Machines,” on page 101.
VMware, Inc.
Chapter 5 Using Virtual Machines
Procedure
n
n
To configure a display size option, select View > Autosize and select an Autofit option.
Option
Description
Autofit Guest
The virtual machine resizes the guest display resolution to match the size
of the Workstation Pro console.
Stretch Guest
The virtual machine changes the guest display to fit the full screen. The
guest display resolution is not changed.
Center Guest
The virtual machine centers the guest display in the full screen. The guest
display resolution is not changed.
Autofit Window
The Workstation Pro console maintains the size of the virtual machine
display resolution. If the guest operating system changes its resolution, the
Workstation Pro console resizes to match the new resolution.
To configure a fit option, select View and select a fit option.
Option
Description
Fit Window Now
The Workstation Pro console changes to match the current display size of
the guest operating system.
Fit Guest Now
The guest operating system display size changes to match the current
Workstation Pro console.
Considerations for Resizing Displays in Linux Virtual Machines
Certain considerations apply to resizing displays in Linux virtual machines.
n
If you have virtual machines that were suspended under a version of VMware Tools earlier than version
5.5, display resizing does not work until the virtual machines are powered off and powered on again.
Rebooting the guest operating system is not sufficient.
n
To use the resizing options, you must update VMware Tools to the latest version in the guest operating
system.
n
You cannot use the Autofit Guest and Fit Guest Now options unless VMware Tools is running in the
guest operating system.
n
The resizing restrictions that the X11 Windows system imposes on physical host systems also apply to
guest operating systems.
n
You cannot resize to a mode that is not defined. The VMware Tools configuration script can add a
large number of mode lines, but you cannot resize in 1-pixel increments as you can in Windows.
VMware Tools adds modelines in 100-pixel increments. This means that you cannot resize a guest
larger than the largest mode defined in the X11 configuration file. If you attempt to resize larger
than that mode, a black border appears and the guest operating system size stops increasing.
n
The X server always starts up in the largest defined resolution. The XDM/KDM/GDM login screen
always appears at the largest size. Because Gnome and KDE allow you to specify your preferred
resolution, you can reduce the guest display size after you log in.
Considerations for Resizing Displays in Solaris Virtual Machines
Certain considerations apply to resizing displays in Solaris virtual machines.
n
To use the display resizing options, you must update VMware Tools to the latest version in the guest
operating system.
n
You cannot use the Autofit Guest and Fit Guest Now options unless VMware Tools is running in the
guest operating system.
VMware, Inc.
101
Using VMware Workstation Pro
n
Solaris 10 guests must be running an Xorg X server and JDS/Gnome.
Working with Nonstandard Resolutions
A guest operating system and its applications might react unexpectedly when the Workstation Pro console
size is not a standard VESA resolution.
For example, you can use Autofit Guest and Fit Guest Now to set the guest operating system screen
resolution smaller than 640×480, but some installers do not run at resolutions smaller than 640×480.
Programs might refuse to run. Error messages might include phrases such as VGA Required to Install or
You must have VGA to install.
If the host computer screen resolution is high enough, you can enlarge the window and select Fit Guest
Now. If the host computer screen resolution does not allow you to enlarge the Workstation Pro console
sufficiently, you can manually set the guest operating system’s screen resolution to 640×480 or larger.
Using Folders to Manage Virtual Machines
You can use folders to organize and manage multiple virtual machines in the library. When virtual machines
are in a folder, you can manage them on the folder tab and perform batch power operations.
n
Add a Virtual Machine to a Folder on page 103
When you add a virtual machine to a folder, it remains an independent entity, but you can also
perform batch power operations. For example you can power on, suspend, and resume each virtual
machine in a folder separately, or you can power on, suspend, and resume all of the virtual machines
in a folder at the same time.
n
Remove a Virtual Machine from a Folder on page 103
You can remove a virtual machine from a folder or move it to a different folder or subfolder.
n
Manage Virtual Machines in a Folder on page 103
When virtual machines are in a folder, you can manage them as a unit. For example, you can select
multiple virtual machines on the folder tab and perform power operations on several virtual machines
at the same time.
n
Change the Power On Delay on page 104
By default, when you power on several virtual machines in a folder, Workstation Pro delays 10
seconds before powering on the next virtual machine. The power on delay avoids overloading the
CPU on the host system when you power on multiple virtual machines. You can change the default
power on delay setting by modifying a Workstation Pro preference.
n
Convert a Team on page 104
If you created a team in an earlier version, you must convert the team before you can use the virtual
machines in the current version of Workstation Pro.
102
VMware, Inc.
Chapter 5 Using Virtual Machines
Add a Virtual Machine to a Folder
When you add a virtual machine to a folder, it remains an independent entity, but you can also perform
batch power operations. For example you can power on, suspend, and resume each virtual machine in a
folder separately, or you can power on, suspend, and resume all of the virtual machines in a folder at the
same time.
Procedure
1
If the folder does not already exist, create it.
Option
Description
Create a folder at the top level of
the library
Right-click My Computer, select New Folder, and type a name for the
folder. The folder appears under My Computer in the library.
Create a subfolder
Right-click the folder, select New Folder, and type a name for the folder.
The new folder appears under the folder in the library.
You can create an unlimited number of folders or subfolders.
2
To add a virtual machine to a folder, select the virtual machine in the library and drag it to the folder.
The virtual machine appears under the folder in the library. You can add an unlimited number of
virtual machines to a folder.
Remove a Virtual Machine from a Folder
You can remove a virtual machine from a folder or move it to a different folder or subfolder.
Procedure
n
To remove a virtual machine from a folder, select the virtual machine in the library and drag it to My
Computer.
The virtual machine appears under My Computer in the library.
n
To move a virtual machine to a different folder or subfolder, select the virtual machine in the library and
drag it to the folder or subfolder.
The virtual machine appears under the folder or subfolder in the library.
Manage Virtual Machines in a Folder
When virtual machines are in a folder, you can manage them as a unit. For example, you can select multiple
virtual machines on the folder tab and perform power operations on several virtual machines at the same
time.
When you power on several virtual machines at the same time, Workstation Pro delays 10 seconds before
powering on the next virtual machine by default. Workstation Pro performs power operations on virtual
machines in the order in which they appear on the folder tab.
You can change the default power on delay setting by modifying a Workstation Pro preference. See “Change
the Power On Delay,” on page 104.
Procedure
n
To perform a power operation on several virtual machines at the same time, use Ctrl-Click to select the
virtual machines on the folder tab and select the power operation from the toolbar or from the VM
menu.
All of the virtual machines that you select must be in the same power state.
VMware, Inc.
103
Using VMware Workstation Pro
n
To perform a power operation on all of the virtual machines at the same time, select the folder in the
library and select the power operation from the toolbar or from the VM menu.
All of the virtual machines in the folder must be in the same power state.
n
To display thumbnails for virtual machines on the folder tab, select a thumbnail size from the dropdown menu on the folder tab.
When a virtual machine is powered on, Workstation Pro updates the thumbnail in real time to show the
actual content of the virtual machine. When a virtual machine is suspended, the thumbnail shows a
screenshot of the virtual machine at the time that it was suspended.
n
To display virtual machine names on the folder tab, select Details from the drop-down menu on the
folder tab.
n
To open the tab for a virtual machine, double-click the virtual machine on the folder tab.
Change the Power On Delay
By default, when you power on several virtual machines in a folder, Workstation Pro delays 10 seconds
before powering on the next virtual machine. The power on delay avoids overloading the CPU on the host
system when you power on multiple virtual machines. You can change the default power on delay setting
by modifying a Workstation Pro preference.
Procedure
1
Select Edit > Preferences and select Workspace.
2
Select the number of seconds for the delay from the Seconds between powering on multiple VMs
drop-down menu.
3
Click OK to save your changes.
Convert a Team
If you created a team in an earlier version, you must convert the team before you can use the virtual
machines in the current version of Workstation Pro.
Procedure
1
Open the team in Workstation Pro or browse to the location of the virtual machine team configuration
(.vmtm) file and drag it to the library.
A dialog box appears that prompts you to convert the team.
2
Click Convert Team to convert the team.
After the team is converted, the .vmtm file is deleted and the virtual machines are added to a new folder in
the library.
After you convert a team, the virtual machines keep their packet loss and bandwidth settings. LAN segment
information appears in the network adapter settings for each virtual machine, where you can modify it.
104
VMware, Inc.
Chapter 5 Using Virtual Machines
Taking Snapshots of Virtual Machines
Taking a snapshot of a virtual machine saves its current state and enables you to return to the same state
repeatedly. When you take a snapshot, Workstation Pro captures the entire state of the virtual machine. You
can use the snapshot manager to review and act on the snapshots for an active virtual machine.
n
Using Snapshots to Preserve Virtual Machine States on page 106
A snapshot includes the contents of the virtual machine memory, virtual machine settings, and the
state of all the virtual disks. When you revert to a snapshot, you return the memory, settings, and
virtual disks of the virtual machine to the state they were in when you took the snapshot.
n
Using the Snapshot Manager on page 106
You can review all snapshots for a virtual machine and act on them directly in the snapshot manager.
n
Take a Snapshot of a Virtual Machine on page 107
When you take a snapshot, you preserve the state of a virtual machine at a specific moment in time
and the virtual machine continues to run. Taking a snapshot enables you to return to the same state
repeatedly. You can take a snapshot while a virtual machine is powered on, powered off, or
suspended.
n
Revert to a Snapshot on page 108
You can restore a virtual machine to a previous state by reverting to a snapshot.
n
Take or Revert to a Snapshot at Power Off on page 108
You can configure a virtual machine to revert to a snapshot or take a new snapshot when you power
off the virtual machine. This feature is useful if you need to discard changes when a virtual machine is
powered off.
n
Enable AutoProtect Snapshots on page 108
The AutoProtect feature preserves the state of a virtual machine by taking snapshots at regular
intervals that you specify. This process is in addition to manual snapshots, which you can take at any
time.
n
Enable Background Snapshots on page 109
When you enable background snapshots, you can continue working while Workstation Pro preserves
the state of a virtual machine. A progress indicator for the background snapshot appears in a corner of
the Workstation Pro window.
n
Exclude a Virtual Disk from Snapshots on page 109
You can configure snapshots so that Workstation Pro preserves states only for certain virtual disks.
n
Delete a Snapshot on page 110
When you delete a snapshot, you delete the state of the virtual machine that you preserved and you
can never return to that state again. Deleting a snapshot does not affect the current state of the virtual
machine.
n
Troubleshooting Snapshot Problems on page 110
You can use a variety of procedures for diagnosing and fixing problems with snapshots.
VMware, Inc.
105
Using VMware Workstation Pro
Using Snapshots to Preserve Virtual Machine States
A snapshot includes the contents of the virtual machine memory, virtual machine settings, and the state of
all the virtual disks. When you revert to a snapshot, you return the memory, settings, and virtual disks of the
virtual machine to the state they were in when you took the snapshot.
You might want to take snapshots in a linear process if you plan to make changes in a virtual machine. For
example, you can take a snapshot, continue to use the virtual machine from that point, take another
snapshot at a later point, and so on. You can revert to the snapshot of a previous known working state of the
project if the changes do not work as expected.
For local virtual machines, you can take more than 100 snapshots for each linear process. For shared and
remote virtual machines, you can take a maximum of 31 snapshots for each linear process.
If you are testing software, you might want to save multiple snapshots as branches from a single baseline in
a process tree. For example, you can take a snapshot before installing different versions of an application to
make sure that each installation begins from an identical baseline.
Figure 5‑1. Snapshots as Restoration Points in a Process Tree
Windows
operating
system
baseline
IE base
Firefox base
SP1
IE base1
You Are
Here
Firefox base1
SP2
IE base2
Firefox base2
Multiple snapshots have a parent-child relationship. The parent snapshot of a virtual machine is the
snapshot on which the current state is based. After you take a snapshot, that stored state is the parent
snapshot of the virtual machine. If you revert to an earlier snapshot, the earlier snapshot becomes the parent
snapshot of the virtual machine.
In a linear process, each snapshot has one parent and one child, except for the last snapshot, which has no
children. In a process tree, each snapshot has one parent, one snapshot can have more than one child, and
many snapshots have no children.
Using the Snapshot Manager
You can review all snapshots for a virtual machine and act on them directly in the snapshot manager.
You must use the snapshot manager to perform the following tasks.
106
n
Show AutoProtect snapshots in the Snapshot menu.
n
Prevent an AutoProtect snapshot from being deleted.
VMware, Inc.
Chapter 5 Using Virtual Machines
n
Rename a snapshot or change its description.
n
Delete a snapshot.
All other snapshot actions are available as menu items in the Snapshot menu under the VM menu.
When you open the snapshot manager for a virtual machine, the snapshot tree appears. The snapshot tree
shows all of the snapshots for the virtual machine and the relationships between the snapshots.
The You Are Here icon in the snapshot tree shows the current state of the virtual machine. The other icons
that appear in the snapshot tree represent AutoProtect snapshots, snapshots of powered-on virtual
machines, snapshots of powered-off virtual machines, and snapshots that are used to create linked clones.
The snapshot manager is available as a menu item in the Snapshot menu under the VM menu.
Take a Snapshot of a Virtual Machine
When you take a snapshot, you preserve the state of a virtual machine at a specific moment in time and the
virtual machine continues to run. Taking a snapshot enables you to return to the same state repeatedly. You
can take a snapshot while a virtual machine is powered on, powered off, or suspended.
Avoid taking snapshots when applications in the virtual machine are communicating with other computers,
especially in production environments. For example, if you take a snapshot while the virtual machine is
downloading a file from a server on the network, the virtual machine continues downloading the file after
you take the snapshot. If you revert to the snapshot, communications between the virtual machine and the
server are confused and the file transfer fails.
Note Workstation 4 virtual machines do not support multiple snapshots. You must upgrade the virtual
machine to Workstation 7.x or later to take multiple snapshots.
Prerequisites
n
Verify that the virtual is not configured to use a physical disk. You cannot take a snapshot of a virtual
machine that uses a physical disk.
n
To have the virtual machine revert to suspend, power on, or power off when you start it, be sure it is in
that state before you take the snapshot. When you revert to a snapshot, you return the memory, settings,
and virtual disks of the virtual machine to the state they were in when you took the snapshot.
n
Complete any suspend operations.
n
Verify that the virtual machine is not communicating with another computer.
n
For better performance, defragment the guest operating system drives.
n
If the virtual machine has multiple disks in different disk modes, power off the virtual machine. For
example, if a configuration requires you to use an independent disk, you must power off the virtual
machine before you take a snapshot.
n
If the virtual machine was created with Workstation 4, delete any existing snapshots or upgrade the
virtual machine to Workstation 5.x or later.
Procedure
1
Select the virtual machine and select VM > Snapshot > Take Snapshot.
2
Type a unique name for the snapshot.
3
(Optional) Type a description for the snapshot.
The description is useful for recording notes about the virtual machine state captured in the snapshot.
4
VMware, Inc.
Click OK to take the snapshot.
107
Using VMware Workstation Pro
Revert to a Snapshot
You can restore a virtual machine to a previous state by reverting to a snapshot.
If you take a snapshot of a virtual machine and add any kind of disk, reverting to the snapshot removes the
disk from the virtual machine. If associated disk (.vmdk) files are not used by another snapshot, the disk files
are deleted.
Important If you add an independent disk to a virtual machine and take a snapshot, reverting to the
snapshot does not affect the state of the independent disk.
Procedure
n
To revert to the parent snapshot, select the virtual machine and select VM > Snapshot > Revert to
Snapshot.
n
To revert to any snapshot, select the virtual machine, select VM > Snapshot, select the snapshot, and
click Go To.
Take or Revert to a Snapshot at Power Off
You can configure a virtual machine to revert to a snapshot or take a new snapshot when you power off the
virtual machine. This feature is useful if you need to discard changes when a virtual machine is powered off.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Snapshots.
3
Select a power off option.
4
Option
Description
Just power off
Powers off the virtual machine without making any changes to snapshots.
Revert to snapshot
Reverts to the parent snapshot of the current state of the virtual machine.
Ask me
Prompts you to power off, revert, or take a snapshot when the virtual
machine is powered off.
Click OK to save your changes.
Enable AutoProtect Snapshots
The AutoProtect feature preserves the state of a virtual machine by taking snapshots at regular intervals that
you specify. This process is in addition to manual snapshots, which you can take at any time.
When AutoProtect snapshots are enabled for a virtual machine, Workstation Pro shows an estimate of the
minimum amount of disk space taken by AutoProtect snapshots on the Virtual Machine Settings window.
This minimum is affected by the memory settings for the virtual machine. The more virtual machine
memory a virtual machine has, the more disk space is available for AutoProtect snapshots.
The AutoProtect feature has certain restrictions.
108
n
Because AutoProtect takes snapshots only while a virtual machine is powered on, AutoProtect
snapshots cannot be cloned. You can clone a virtual machine only if it is powered off.
n
AutoProtect snapshots are not taken in Workstation Player, even if AutoProtect is enabled for the
virtual machine in Workstation Pro.
n
You cannot configure the AutoProtect feature for a shared or remote virtual machine.
VMware, Inc.
Chapter 5 Using Virtual Machines
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select AutoProtect and select Enable AutoProtect.
3
Select the interval between snapshots.
Option
Description
Half-Hourly
Snapshots are taken every half hour.
Hourly
Snapshots are taken every hour.
Daily
Snapshots are taken daily.
The interval is measured only when the virtual machine is powered on. For example, if you set
AutoProtect to take snapshots hourly and then power off the virtual machine five minutes later, the
next AutoProtect snapshot takes place 55 minutes after you power on the virtual machine again,
regardless of the length of time the virtual machine was powered off.
Workstation Pro saves only one snapshot per tier, even if a snapshot matches more than one tier.
4
Select the maximum number of AutoProtect snapshots to retain.
After the maximum number of AutoProtect snapshots is reached, Workstation Pro deletes the oldest
AutoProtect snapshot each time a new AutoProtect snapshot is taken. This setting does not affect the
number of manual snapshots that you can take and keep.
5
Select OK to save your changes.
Enable Background Snapshots
When you enable background snapshots, you can continue working while Workstation Pro preserves the
state of a virtual machine. A progress indicator for the background snapshot appears in a corner of the
Workstation Pro window.
Important Enabling background snapshots for a host with slow hard disks can adversely affect
performance. If you experience significant performance problems when taking or restoring snapshots,
disable background snapshots.
Prerequisites
On a Linux host, run Workstation Pro as the root user. Only root users are allowed to change background
snapshot settings.
Procedure
1
Select Edit > Preferences.
2
On the Priority tab, select Take snapshots in the background.
3
Click OK to save your changes.
4
Restart the virtual machines.
Virtual machines must be powered off and then powered on, rather than restarted, for background
snapshot changes to take effect.
Exclude a Virtual Disk from Snapshots
You can configure snapshots so that Workstation Pro preserves states only for certain virtual disks.
In certain configurations, you might want to revert some disks to a snapshot while other disks retain all
changes. For example, you might want a snapshot to preserve a disk with the operating system and
applications, but always keep the changes to a disk with documents.
VMware, Inc.
109
Using VMware Workstation Pro
Prerequisites
n
Power off the virtual machine.
n
Delete existing snapshots.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select the drive to exclude and click Advanced.
3
Select Independent and select the disk mode.
Option
Description
Persistent
Changes are immediately and permanently written to the disk. Disks in
persistent mode behave like conventional disks on a physical computer.
Nonpersistent
Changes to the disk are discarded when you power off or restore a
snapshot. In nonpersistent mode, a virtual disk is in the same state every
time you restart the virtual machine. Changes to the disk are written to and
read from a redo log file that is deleted when you power off or reset the
virtual machine.
Delete a Snapshot
When you delete a snapshot, you delete the state of the virtual machine that you preserved and you can
never return to that state again. Deleting a snapshot does not affect the current state of the virtual machine.
If a snapshot is used to create a clone, the snapshot becomes locked. If you delete a locked snapshot, the
clones created from the snapshot no longer operate.
You cannot delete a snapshot if the associated virtual machine is designated as a template for cloning.
Procedure
1
Select the virtual machine and select VM > Snapshot > Snapshot Manager.
2
If you are deleting an AutoProtect snapshot, select Show AutoProtect snapshots.
3
Select the snapshot.
4
Select an option to delete the snapshot.
Option
5
Action
Delete a single snapshot
Click Delete.
Delete the snapshot and all of its
children
Right-click and select Delete Snapshot and Children.
Delete all snapshots
Right-click, select Select All, and click Delete.
Click Close to close the snapshot manager.
Troubleshooting Snapshot Problems
You can use a variety of procedures for diagnosing and fixing problems with snapshots.
Guest Operating System Has Startup Problems
The guest operating system experiences problems during startup.
Problem
The guest operating system does not start up properly.
110
VMware, Inc.
Chapter 5 Using Virtual Machines
Cause
Keeping more than 99 snapshots for each branch in a process tree can cause startup problems.
Solution
Delete some snapshots or create a full clone of the virtual machine.
Take Snapshot Option Is Disabled
The Snapshot Manager Take Snapshot option is disabled.
Problem
You cannot select the Take Snapshot option in the Snapshot Manager.
Cause
The virtual machine might have multiple disks in different disk modes.
Solution
If your configuration requires an independent disk, you must power off the virtual machine before you take
a snapshot.
Performance Is Slow When You Take a Snapshot
Significant performance problems occur when you take or restore snapshots.
Problem
Performance is slow when you take or restore snapshots.
Cause
The host operating system has a slow hard disk.
Solution
Upgrade the hard disk or disable background snapshots to improve performance. See “Enable Background
Snapshots,” on page 109 for information on background snapshots.
Install New Software in a Virtual Machine
Installing new software in a virtual machine is similar to installing new software on a physical computer.
Only a few additional steps are required.
Prerequisites
n
Verify that VMware Tools is installed in the guest operating system. Installing VMware Tools before
installing the software minimizes the likelihood that you will have to reactivate the software if the
virtual machine configuration changes.
n
Verify that the virtual machine has access to the CD-ROM drive, ISO image file, or floppy drive where
the installation software is located.
Procedure
1
VMware, Inc.
Select the virtual machine and select VM > Settings.
111
Using VMware Workstation Pro
2
On the Hardware tab, select Memory, set the final memory size for the virtual machine, and click OK.
Some applications use a product activation feature that creates a key based on the virtual hardware in
the virtual machine where it is installed. Changes in the configuration of the virtual machine might
require you to reactivate the software. Setting the memory size minimizes the number of significant
changes.
3
Install the new software according to the manufacturer’s instructions.
Disable Acceleration if a Program Does Not Run
When you install or run software inside a virtual machine, Workstation Pro might appear to stop
responding. This problem typically occurs early in the program's execution. In many cases, you can get past
the problem by temporarily disabling acceleration in the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Processors.
3
Select Disable acceleration for binary translation to disable acceleration.
4
Click OK to save your changes.
What to do next
After you pass the point where the program encountered problems, re-enable acceleration. Because
disabling acceleration slows down virtual machine performance, you should use it only for getting past the
problem with running the program
Take a Screenshot of a Virtual Machine
You can take a screenshot of a virtual machine and save it to the clipboard, to a file, or to both a file and the
clipboard.
When a take a screenshot of a virtual machine, the image is saved as a portable network graphics (.png) file
by default. On Windows hosts, you can also save the screenshot as a bitmap (.bmp) file.
On Linux hosts, saving a screenshot to the clipboard is supported only on systems running Gnome 2.12 or
later.
Procedure
1
Select Edit > Preferences.
2
Select Workspace and select a save screenshots option.
You can select both options to save screenshots to both a file and the clipboard.
Option
Description
Clipboard
Save the screenshot to the clipboard.
File
Save screenshots to a file. You can select:
n Always ask for location
n Save to Desktop
n Browse for custom location
By default, Workstation Pro saves screenshots to .png files on the Desktop
of the host computer. If you save the file to the desktop, the filename is
generated from the virtual machine name and the time at which the
screenshot is taken.
To save screenshots to .bmp files on Windows hosts, select Always ask for
location and specify the file type when you save the screenshot.
112
VMware, Inc.
Chapter 5 Using Virtual Machines
3
Click OK to save your changes.
4
To take the screenshot, select the virtual machine, select VM > Capture Screen.
Delete a Virtual Machine
You can delete a virtual machine and all of its files from the host file system.
Important Do not delete a virtual machine if it was used to make a linked clone and you want to continue
to use the linked clone. A linked clone stops working if it cannot find the virtual disk files for the parent
virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
u
VMware, Inc.
Select the virtual machine and select VM > Manage > Delete from Disk.
113
Using VMware Workstation Pro
114
VMware, Inc.
Configuring and Managing Virtual
Machines
6
You can configure virtual machine power, display, video, and sound card settings, encrypt a virtual machine
to secure it from unauthorized use, and restrict the Workstation Pro user interface to limit virtual machine
operations.
You can also move a virtual machine to another host system or to a different location on the same host
system, configure a virtual machine as a VNC server, change the hardware compatibility of a virtual
machine, and export a virtual machine to Open Virtualization Format (OVF).
This chapter includes the following topics:
n
“Configure Power Options and Power Control Settings,” on page 115
n
“Set Workstation Pro Display Preferences,” on page 117
n
“Configure Display Settings for a Virtual Machine,” on page 118
n
“Set Preferences for Unity Mode,” on page 121
n
“Setting Screen Color Depth,” on page 121
n
“Using Advanced Linux Sound Architecture,” on page 122
n
“Encrypting and Restricting Virtual Machines,” on page 123
n
“Moving Virtual Machines,” on page 127
n
“Configure a Virtual Machine as a VNC Server,” on page 132
n
“Change the Hardware Compatibility of a Virtual Machine,” on page 135
n
“Clean Up a Virtual Hard Disk on Windows Hosts,” on page 137
n
“Export a Virtual Machine to OVF Format,” on page 137
n
“Writing and Debugging Applications That Run In Virtual Machines,” on page 138
Configure Power Options and Power Control Settings
You can configure how a virtual machine behaves when it is powered on, powered off, and closed. You can
also configure the behavior of the power controls and specify which power options appear in the context
menu when you right-click the virtual machine in the library.
You can configure a soft or hard setting for each power control. A soft setting sends a request to the guest
operating system, which the guest operating system can ignore or, in the case of a deadlocked guest, it
might not be able to handle. A guest operating system cannot ignore a hard power control. Hard power
control settings are configured by default.
VMware, Inc.
115
Using VMware Workstation Pro
Power control settings affect the behavior of the stop, suspend, start, and reset buttons. The behavior you
select for a power control appears in a tooltip when you mouse over the button. Power control settings also
determine which power options appear in the context menu. For example, if you select the hard setting for
the start control, Power On appears in the context menu when you right-click the virtual machine in the
library. If you select the soft setting, Start Up Guest appears instead.
Not all guest operating systems respond to a shutdown or restart signal. If the guest operating system does
not respond to the signal, shut down or restart from within the guest operating system.
You can pass X toolkit options when you power on a virtual machine for a Linux guest operating system.
See Chapter 16, “Using the vmware Command,” on page 285 for more information.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Power.
3
Select a power option.
Note You cannot configure these options for a shared or remote virtual machine.
4
5
116
Option
Description
Enter full screen mode after
powering on
The virtual machine window enters full screen mode after it is powered
on.
Close after powering off or
suspending
The virtual machine tab closes after it is powered off or suspended.
Report battery information to guest
Battery information is reported to the guest operating system. If you run
the virtual machine on a laptop in full screen mode, this option enables
you to determine when the battery is running low. This option is available
only for Workstation 6.x and later virtual machines.
Select a setting for the power off control.
Option
Description
Power Off
(Hard option) Workstation Pro powers off the virtual machine abruptly
with no consideration for work in progress.
Shut Down Guest
(Soft option) Workstation Pro sends a shut down signal to the guest
operating system. An operating system that recognizes the signal shuts
down gracefully. Not all guest operating systems respond to a shutdown
signal from Workstation Pro. If the guest operating system does not
respond to the signal, shut down from the guest operating system as you
would a physical machine.
Select a setting for the suspend control.
Option
Description
Suspend
(Hard option) Workstation Pro suspends the virtual machine and leaves it
connected to the network.
Suspend Guest
(Soft option) Workstation Pro suspends the virtual machine and
disconnects it from the network. VMware Tools runs a script in the guest
operating system. On Windows guests, if the virtual machine is configured
to use DHCP, the script releases the IP address of the virtual machine. On
Linux, FreeBSD, and Solaris guests, the script stops networking for the
virtual machine.
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
6
Select a setting for the start control.
Note You cannot configure start control settings for a shared or remote virtual machine.
7
8
Option
Description
Power On
(Hard option) Workstation Pro starts the virtual machine.
Start Up Guest
(Soft option) Workstation Pro starts the virtual machine and VMware Tools
runs a script in the guest operating system. On Windows guests, if the
virtual machine is configured to use DHCP, the script renews the IP
address of the virtual machine. On a Linux, FreeBSD, or Solaris guest, the
script starts networking for the virtual machine.
Select a setting for the reset control.
Option
Description
Reset
(Hard option) Workstation Pro resets the virtual machine abruptly with no
consideration for work in progress.
Restart Guest
(Soft option) Workstation Pro shuts down and restarts the guest operating
system gracefully. VMware Tools runs scripts before the virtual machine
shuts down and when the virtual machine starts up.
Click OK to save your changes.
Set Workstation Pro Display Preferences
You can configure Workstation Pro display preferences to control how the display settings of all virtual
machines adjust to fit the Workstation Pro window. These adjustments occur when you resize the
Workstation Pro window or when you change the display settings in the guest operating system.
Prerequisites
Verify that the latest version of VMware Tools is installed in all guest operating systems.
Procedure
1
Select Edit > Preferences and select Display.
If you are using Windows 8.1 (Update 2) or Windows 10, Workstation Pro detects the DPI on each
monitor and scales the virtual machine to match the DPI on the host.
2
Configure the Autofit options.
You can select one option, both options, or no options.
VMware, Inc.
Option
Description
Autofit window
Resize the application window to match the virtual machine display
settings when the virtual machine display settings are changed.
Autofit guest
Change the virtual machine settings to match the application window
when the application window is resized.
117
Using VMware Workstation Pro
3
4
Select a full screen option.
Option
Description
Autofit guest (change guest
resolution)
Virtual machine resolution settings change to match the display settings of
the host system when you are in full screen mode.
Stretch guest (no resolution
change)
Virtual machine resolution settings are retained, but the display still
changes to fill the full screen. Select this setting if you need to retain lowresolution settings, for example, when playing older computer games that
run only at low resolutions.
Center guest (no resolution change)
The host system and virtual machines retain their own display settings
when you are in full screen mode.
Select menu and toolbar options.
You can select one or more options, or no options.
5
Option
Description
Use a single button for power
controls
(Windows hosts only) When this setting is selected, the start, stop,
suspend, and reset power controls appear on the toolbar as a single button
with a drop-down menu. When this setting is deselected, each power
control has a separate button on the toolbar.
Combine toolbar with menu bar in
windowed mode
Show the Workstation Pro menus and toolbar on a single bar when
Workstation Pro is in windowed mode.
Combine tabs with toolbar in full
screen
Show the tabs and toolbar in a single bar when Workstation Pro is in full
screen mode.
Show toolbar edge when unpinned
in full screen
Show the edge of the full screen toolbar. When this setting is deselected,
the edge of the full screen toolbar is not visible. The full screen toolbar
appears for a few seconds when you place your cursor near the top of the
screen.
Click OK to save your changes.
Configure Display Settings for a Virtual Machine
You can specify monitor resolution settings, configure multiple monitors, and select accelerated graphics
capabilities for a virtual machine. You can use the multiple-monitor feature when the virtual machine is in
full screen mode.
For Windows guests, to use DirectX 9 accelerated graphics, the guest operating system must be Windows
XP or later. To use DirectX 10 accelerated graphics, the guest operating system must be Windows Vista or
later.
Prerequisites
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Verify that the guest operating system in the virtual machine is Windows XP or higher, or Linux.
n
If you plan to use DirectX 9 or DirectX 10 accelerated graphics, prepare the host system. See “Prepare
the Host System to Use 3D Accelerated Graphics,” on page 119.
n
If you are using Windows 8.1 (Update 2) or Windows 10, Workstation Pro detects the DPI on each
monitor and scales the virtual machine to match the DPI on the host.
Procedure
118
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Display.
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
3
(Optional) To run applications that use DirectX 9 or DirectX 10 accelerated graphics, select Accelerate
3D graphics.
4
Specify whether host settings determine the number of monitors.
5
Option
Description
Use host setting for monitors
When you select this setting, the SVGA driver uses two monitors, a
maximum bounding box width of 3840, and a maximum bounding box
height of 1920. The virtual machine is configured to have a minimum of
two 1920x1200 monitors, in a side-by-side topology, in both normal and
rotated orientations. If the host system has more than two monitors, the
virtual machine uses the number of monitors on the host system instead. If
the host system's bounding box is wider or taller than the defaults, the
virtual machine uses the larger size. You should select this setting in most
cases.
Specify monitor settings
Set the number of monitors that the virtual machine will see, regardless of
the number of monitors on the host system. This setting is useful if you use
a multimonitor host system and you need to test in a virtual machine that
has only one monitor. It is also useful if you are developing a multimonitor
application in a virtual machine and the host system has only one monitor.
After you power on the virtual machine, the guest operating system sees
the number of monitors that you specified. Select a resolution from the list
or type a setting that has the format width x height, where width and height
are the number of pixels.
Note You cannot configure the resolution setting for a remote virtual
machine.
(Optional) Select the maximum amount of guest memory that can be used for graphics memory using
the drop down menu. The default value of video memory varies by guest OS.
Guest OS
Default
Windows 7 and later
1 GB
Windows XP and earlier
512 MB
Linux
768 MB
Note If you manually edited the .vmx file to change the memory size for the virtual machine, the value
you entered in the .vmx file is displayed, labeled Custom.
6
To enable display scaling for the virtual machine, select the Automatically adjust user interface size in
the virtual machine check box.
7
Click OK to save your changes.
Prepare the Host System to Use 3D Accelerated Graphics
You must perform certain preparation tasks on the Windows or Linux host system to use 3D accelerated
graphics in a virtual machine.
Prerequisites
n
On a Windows host, verify that the host has a video card that supports DirectX 9 or DirectX 10 and the
latest DirectX Runtime required for the DirectX version being used.
n
On a Linux host, verify that the host has a video card that supports accelerated OpenGL 2.0 if you are
using DirectX 9, or OpenGL 3.3 if you are using DirectX 10.
The VMware guest operating system OpenGL driver for Windows and Linux supports the OpenGL 3.3
core profile only. The OpenGL3.3 compatibility profile is not supported.
VMware, Inc.
119
Using VMware Workstation Pro
Procedure
1
Upgrade the video drivers on the host system to the latest versions.
ATI Graphics drivers are available from the AMD Web site. NVIDIA drivers are available from the
NVIDIA Web site.
2
3
If you have a Windows host system, move the Hardware Acceleration slider to the Full position.
Option
Description
Windows 7, Windows 8, and
Windows 10
Right-click the desktop and select Personalize > Screen resolution >
Advanced Settings > Troubleshoot > Change settings.
If you have a Linux host system, run commands to test the host for compatibility.
a
Verify that direct rendering is enabled.
glxinfo | grep direct
b
Verify that 3D applications work.
glxgears
Prepare a Virtual Machine to Use Accelerated 3D Graphics
You must perform certain preliminary tasks to use accelerated 3D graphics on a virtual machine.
The accelerated 3D graphics feature is enabled by default on Workstation 6.x and later virtual machines.
Prerequisites
n
Prepare the host system to use accelerated 3D graphics. See “Prepare the Host System to Use 3D
Accelerated Graphics,” on page 119.
n
If using DirectX 9, verify that the guest operating system is Windows XP or later. DirectX 9 is supported
on virtual machines running hardware version 11 or earlier.
n
If using DirectX 10, verify that the guest operating system is Windows 7 or later. DirectX 10 is
supported on virtual machines running hardware version 12 or later.
n
Verify that the latest version of VMware Tools is installed in the guest operating system.
n
Power off the virtual machine. The virtual machine must not be suspended.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Display.
3
Select Accelerate 3D graphics.
4
Configure the virtual machine to use only one monitor.
5
Click OK to save your changes.
6
Power on the virtual machine and install the required DirectX EndRuntime version.
This download is available from the Microsoft Download Center.
7
120
Install and run your 3D applications.
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
Set Preferences for Unity Mode
You can set preferences for Unity mode to control whether that the virtual machine Start or Applications
menu is available from the host system desktop. You can also select the border color that appears around
applications that run in Unity mode when they appear on the host system desktop.
When you use the virtual machine Start or Applications menu from the host system desktop, you can start
applications in the virtual machine that are not open in Unity mode. If you do not enable this feature, you
must exit Unity mode to display the virtual machine Start or Applications menu in the console view.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options, select Unity.
3
Select a Unity window decoration option.
Option
Description
Show borders
Set a window border that identifies the application as belonging to the
virtual machine rather than to the host computer.
Show badges
Display a logo in the title bar.
Use a custom color in window
borders
Use a custom color in window borders to help distinguish between the
application windows that belong to various virtual machines. For example,
you can set the applications for one virtual machine to have a blue border
and set the applications for another virtual machine to have a yellow
border. On Windows hosts, click Choose color to use the color chooser.
4
To control whether the virtual machine Start or Application menu available on the host system
desktop, select or deselect Enable applications menu.
5
Click OK to save your changes.
6
(Optional) To minimize the Workstation Pro window when you enter Unity mode, edit the
Workstation Pro Unity preference setting.
Workstation Pro preference settings apply to all virtual machines.
a
Select Edit > Preferences and select Unity.
b
Select Minimize Workstation when entering Unity .
c
Click OK to save your changes.
Setting Screen Color Depth
The number of screen colors available in the guest operating system depends on the screen color setting of
the host operating system.
Virtual machines support the following screen colors.
n
16-color (VGA) mode
n
8-bit pseudocolor
n
16 bits per pixel (16 significant bits per pixel)
n
32 bits per pixel (24 significant bits per pixel)
If the host operating system is in 15-bit color mode, the guest operating system color setting controls offer
15-bit mode in place of 16-bit mode. If the host operating system is in 24-bit color mode, the guest operating
system color setting controls offer 24-bit mode in place of 32-bit mode.
VMware, Inc.
121
Using VMware Workstation Pro
If you run a guest operating system set for a greater number of colors than the host operating system, the
colors in the guest operating system might not be correct or the guest operating system might not be able to
use a graphical interface. If these problems occur, you can either increase the number of colors in the host
operating system or decrease the number of colors in the guest operating system.
To change color settings on the host operating system, power off all virtual machines and close
Workstation Pro and then follow standard procedures for changing color settings.
How you change color settings in a guest operating system depends on the type of guest operating system.
In a Windows guest, the Display Properties control panel offers only those settings that are supported. In a
Linux or FreeBSD guest, you must change the color depth before you start the X server, or you must restart
the X server after making the changes.
For best performance, use the same number of colors in the host and guest operating systems.
Using Advanced Linux Sound Architecture
Workstation 7.x and later versions support Advanced Linux Sound Architecture (ALSA). You might need to
perform certain preparation tasks before you can use ALSA in a virtual machine.
To use ALSA, the host system must meet certain requirements.
n
The ALSA library version on the host system must be version 1.0.16 or later.
n
The sound card on the host system must support ALSA. The ALSA project Web site maintains a current
listing of sound cards and chipsets that support ALSA.
n
The ALSA sound card on the host system must not be muted.
n
The current user must have the appropriate permissions to use the ALSA sound card.
Override the ALSA Library Version Requirement for a Virtual Machine
If the host system has an earlier version of the ALSA library, you can override the requirement for version
1.0.16.
If the host system does not meet ALSA requirements, or for some other reason cannot use ALSA,
Workstation uses the OSS API for sound playback and recording. Depending on the sound card in the host
system, the sound quality might not be as good when an older version of the ALSA library is used.
You should upgrade the host system to use the latest sound drivers and libraries.
Procedure
1
Open the virtual machine configuration (.vmx) file in a text editor.
2
Add the sound.skipAlsaVersionCheck property and set it to TRUE.
For example: sound.skipAlsaVersionCheck = "TRUE"
Obtain ALSA Sound Card Information
You can type commands at the command prompt on a Linux host system to obtain information about the
ALSA sound card and determine whether the current user has the appropriate permissions to access it.
Prerequisites
Obtain the documentation for the alsamixer program. The documentation is available on the Internet.
122
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
Procedure
n
Use the alsamixer program to determine whether the current user has the appropriate permissions to
access the ALSA sound card.
If the user does not have the appropriate permissions, an error similar to alsamixer: function
snd_ctl_open failed for default: No such device. appears.
n
If a user does not have the appropriate permissions to access the ALSA sound card, give the user read,
write, and execute permissions to the directory that contains the ALSA sound card.
The ALSA sound card is usually located in /dev/snd/. This location can vary depending on the Linux
distribution.
n
To list the name and type of sound chipset on the host system, type the command lspci | grep -I
audio.
n
To list the sound cards on the host system, type the command cat /proc/asound/cards.
n
If the ALSA sound card is muted, use the alsamixer program to unmute it.
Configure a Virtual Machine to Use an ALSA Sound Card
You can configure a virtual machine to use an ALSA sound card by modifying virtual machine settings.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Sound Card.
3
Select Connected and Connect at power on.
4
Select Specify host sound card and select the ALSA sound card.
5
If the ALSA sound card does not appear in the list, use the alsa-utils package to list the ALSA sound
cards on the host system and select Specify host sound card again.
For example: aplay -L
6
Click OK to save your changes.
Encrypting and Restricting Virtual Machines
Encrypting a virtual machine secures it from unauthorized use. To decrypt a virtual machine, users must
enter the correct encryption password. Restricting a virtual machine prevents users from changing
configuration settings unless they first enter the correct restrictions password. You can also set other
restriction policies.
When you encrypt a virtual machine, Workstation Pro prompts you for a password. After the virtual
machine is encrypted, you must enter this password to open the virtual machine or to remove encryption
from it. Workstation Pro displays the encrypted virtual machine with a lock icon until you enter the
password to open the virtual machine.
If you also enable restrictions, users are prevented from modifying the virtual machine. For example, you
can enable restrictions to prevent users from removing virtual devices, changing the memory allocation,
modifying removable devices, changing the network connection type, and changing the virtual hardware
compatibility. A password prompt appears whenever anyone performs any of the following actions on the
virtual machine:
n
Clicks Edit virtual machine settings or Upgrade Virtual Machine on the virtual machine summary tab
n
Double-clicks a virtual device in the Devices list on the virtual machine summary tab
VMware, Inc.
123
Using VMware Workstation Pro
n
Selects the virtual machine and selects VM > Settings or VM > Manage > Change Hardware
Compatibility from the menu bar
n
Clicks or right-clicks on a removable device icon to edit its settings
n
Uses a Removable Devices > device_name menu to edit the settings for a device
Besides restricting users from changing USB device settings, you can also optionally set a policy that
prevents users from connecting USB devices to the guest operating system. If you set the policy to allow
connecting USB devices, users are not prompted to enter the restrictions password to use the devices.
An optional policy includes a setting that forces users to change the encryption password if they move or
copy the virtual machine. For example, a teacher might provide a copy of the virtual machine to all students
in the class and set this restriction so that all students must create their own encryption password.
Another optional policy includes setting an expiration date for a virtual machine. For example, an
administrator can create a virtual machine for a temporary employee and set the virtual machine to expire
when the temporary employee leaves the company.
Important Make sure you record the encryption password and the restrictions password. Workstation Pro
does not provide a way to retrieve these passwords if you lose them.
Encryption applies to all snapshots in a virtual machine. If you restore a snapshot in an encrypted virtual
machine, the virtual machine remains encrypted whether or not it was encrypted when the snapshot was
taken. If you change the password for an encrypted virtual machine, the new password applies to any
snapshot you restore, regardless of the password in effect when the snapshot was taken.
n
Virtual Machine Encryption Limitations on page 124
The encryption feature has certain limitations.
n
Encrypt and Restrict a Virtual Machine on page 125
You can encrypt a virtual machine to secure it from unauthorized use. You can also enable restrictions
to prevent users from changing configuration settings.
n
Remove Encryption From a Virtual Machine on page 126
You can remove encryption from a virtual machine.
n
Change the Password for an Encrypted Virtual Machine on page 127
You can change the password for an encrypted virtual machine. Changing the password does not reencrypt the virtual machine.
Virtual Machine Encryption Limitations
The encryption feature has certain limitations.
124
n
You must power off a virtual machine before you add or remove encryption or change the encryption
password.
n
The encryption feature supports virtual machines that have virtual hardware version 5.x or later only.
n
You cannot create a linked clone from an encrypted virtual machine.
n
If more than one unencrypted virtual machine shares the same virtual disk and you encrypt one of the
virtual machines, the virtual disk becomes unusable for the unencrypted virtual machine.
n
You cannot encrypt a shared or remote virtual machine.
n
You cannot upload an encrypted virtual machine to a remote server.
n
You cannot share an encrypted virtual machine.
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
Encrypt and Restrict a Virtual Machine
You can encrypt a virtual machine to secure it from unauthorized use. You can also enable restrictions to
prevent users from changing configuration settings.
Depending on the size of the virtual machine, the encryption process can take several minutes or several
hours.
Prerequisites
n
Power off the virtual machine.
n
Familiarize yourself with the encryption feature limitations. See “Virtual Machine Encryption
Limitations,” on page 124.
n
Familiarize yourself with restricted virtual machine expiration behavior. See “Restricted Virtual
Machine Expiration,” on page 126.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Access Control.
3
Click Encrypt.
4
Click Encrypt, type an encryption password, and click Encrypt.
The encryption password is required to gain access to the virtual machine. It does not prevent the user
from changing the virtual machine configuration. Turn on restrictions and enter a password to prevent
the user from changing the virtual machine configuration.
Important Record the encryption password you use. If you forget the password, Workstation Pro
does not provide a way to retrieve it.
Workstation Pro begins encrypting the virtual machine. After the encryption process is complete, you
can optionally set a restrictions password.
5
(Optional) To enable restrictions, select the Enable restrictions check box and configure restrictions
options.
Option
Action
Restrictions password
Set the restrictions password. The restrictions password prevents users of
the virtual machine from changing the virtual machine configuration.
Important Record the restrictions password you use. If you forget the
password, Workstation Pro does not provide a way to retrieve it.
Restrictions type
Select a restriction type.
Fixed - Enables you to set specific restrictions for the individual virtual
machine.
n Managed - Enables restrictions for the virtual machine to be managed
by a Horizon FLEX Policy Server. If you select this option, you must
provide the server address of a Horizon FLEX server in the
Management server text box. Do not select this option unless you have
a Horizon FLEX installation.
n
VMware, Inc.
Require the user to change the
encryption password when this
virtual machine is moved or copied
(Optional) Select this check box to require the user to change the
encryption password for the virtual machine if the virtual machine is
moved or copied.
Allow USB devices to be connected
to this virtual machine
(Optional) Select this check box to allow USB device connections in the
virtual machine.
125
Using VMware Workstation Pro
Option
Action
Expire the virtual machine after
(Optional) If you selected the Fixed restriction type, set a date and time for
the virtual machine to expire. Click the down arrow to select an expiration
date. Click in the time field and enter the expiration time.
To enter an alert message, perform these steps:
a Click Advanced.
b
c
d
e
6
Enter text to be displayed when the virtual machine expires.
(Optional) Select the check box to show a message when the virtual
machine is about to expire and enter message text.
(Optional) Set the number of days before expiration that the message is
displayed.
Click OK.
Management server
(Optional) If you selected the Managed restriction type, type the URL of
the Horizon FLEX server on which you intend to host the virtual machine
with Horizon FLEX.
Check server
(Optional) If you selected the Managed restriction type, click this button to
verify the Horizon FLEX server URL.
Manage certificates
(Optional) If you selected the Managed restriction type, click this button
and then click Add to navigate to the location of each certificate file to add.
If you add certificates to the virtual machine, the Horizon FLEX Client uses
the certificates in the virtual machine and does not use the certificates on
the host. To control certificates for all virtual machines from the Horizon
FLEX Policy Server, leave the Manage Certificates box blank.
Click OK in the Virtual Machine Settings dialog box.
Restricted Virtual Machine Expiration
When you enable restrictions for an encrypted virtual machine, how and when the virtual machine expires
depends on whether you configure the Fixed or Managed restrictions type.
Fixed Virtual Machine Expiration
If you select the Fixed restriction type for an encrypted virtual machine, the expiration date and time are
fixed, for example, December 12, 2012, at 11:00 am in local time. The time and date are in Universal Time
Coordinated (UTC) format.
When an encrypted virtual machine with an expiration date is powered on, the virtual machine verifies the
time and compares it to the expiration date. While running, the virtual machine periodically checks the time
and stores all successful timestamps as the last trusted time stamp. If the last trusted timestamp exceeds the
date set for the virtual machine expiration, a warning message appears and the virtual machine is
suspended.
After a virtual machine has expired, you can delete or extend its expiration date. You must provide the
restrictions password to change the expiration date.
Managed Virtual Machine Expiration
If you select the Managed restriction type for an encrypted virtual machine, a Horizon FLEX Policy Server
manages the virtual machine expiration date and time. For more information, see the VMware Horizon FLEX
Administration Guide.
Remove Encryption From a Virtual Machine
You can remove encryption from a virtual machine.
Prerequisites
n
126
Power off the virtual machine.
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
n
Remove any sensitive information from the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Encryption.
3
Deselect the Enable restrictions check box, if it is selected.
You cannot remove encryption from a virtual machine while restrictions are enabled.
4
Click Remove Encryption.
5
Type the encryption password.
6
Click Remove Encryption.
Change the Password for an Encrypted Virtual Machine
You can change the password for an encrypted virtual machine. Changing the password does not re-encrypt
the virtual machine.
When you use this feature to change the password, the master key used to decrypt the virtual machine is not
changed, and the virtual machine is not re-encrypted. For security reasons, instead of changing the
password by using this procedure, you might choose to remove encryption and then encrypt the virtual
machine again with a different password.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select Encryption.
3
Select Change Password.
4
Type the current password and the new password.
Important Make sure that you record the password. If you forget the password, Workstation Pro does
not provide a way to retrieve it.
Moving Virtual Machines
You can move a virtual machine that was created in Workstation Pro to a different host system or to a
different location on the same host system. You can also use a virtual machine that was created in
Workstation Pro in Workstation Player.
n
Move a Virtual Machine to a New Location or Host on page 128
You can move a virtual machine that was created in Workstation Pro to a different host system or to a
different location on the same host system. You can also move a virtual machine to a host system that
has a different operating system.
n
Open a Virtual Machine in VMware Workstation Player on page 129
®
VMware Workstation Player opens and plays virtual machines created in other VMware products.
On Windows hosts, Workstation Player can also open and play Microsoft Virtual PC and Virtual
Server virtual machines and Symantec LiveState Recovery and system images.
VMware, Inc.
127
Using VMware Workstation Pro
n
Configure a Virtual Machine for Compatibility on page 130
When you create a virtual machine that you intend to distribute to other users, you should configure
the virtual machine for maximum compatibility with all expected host systems. Users might be limited
in their ability to make changes in a virtual machine so that it is compatible with their host systems.
n
Using the Virtual Machine UUID on page 131
Each virtual machine has a universal unique identifier (UUID). The UUID is generated when you
initially power on the virtual machine.
Move a Virtual Machine to a New Location or Host
You can move a virtual machine that was created in Workstation Pro to a different host system or to a
different location on the same host system. You can also move a virtual machine to a host system that has a
different operating system.
Moving a virtual machine typically involves moving all of the files that make up the virtual machine. All
files in the virtual machine's original directory when the virtual machine was created must be moved. The
path names for all files associated with a Workstation Pro virtual machine are relative to the virtual machine
directory. If you stored any files in directories other than the virtual machine directory, be sure to move them
into a directory of the same name and same position relative to the location of the virtual machine.
When you move a virtual machine to a different host system or to a different location on the same host
system, Workstation Pro generates a new MAC address for the virtual network adapter. Workstation Pro
also generates a new MAC address when you rename a directory in the path to the virtual machine
configuration file.
Prerequisites
n
Familiarize yourself with how Workstation Pro generates UUIDs for moved virtual machines. See
“Using the Virtual Machine UUID,” on page 131.
n
If you are moving the virtual machine to a different host system, familiarize yourself with the
limitations of moving a virtual machine to a new host. see “Limitations of Moving a Virtual Machine to
a Different Host,” on page 129.
n
If you are moving a linked clone or a parent virtual machine, verify that the clone can access the parent
virtual machine. See “Moving Linked Clones,” on page 129 for more information.
n
Make backup copies of the files in the virtual machine directory for the virtual machine that you are
moving.
Procedure
1
Verify that all virtual machine files are stored in the virtual machines directory.
Some files might reside outside of the virtual machines directory.
128
2
Shut down the guest operating system and power off the virtual machine.
3
Copy the virtual machine files to the new location.
4
If you moved the virtual machine to a different location on the same host system, remove the virtual
machine from the library, select File > Open, and browse to the virtual machine configuration (.vmx) file
in its new location.
5
If you moved the virtual machine to a different host system, start Workstation Pro on the new host
system, select File > Open and browse to the virtual machine configuration (.vmx) file.
6
When you are certain that the virtual machine works correctly in its new location, delete the virtual
machine files from its original location.
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
7
If the virtual machine does not work correctly, verify that you copied all of the virtual machine files to
the new location.
You can examine virtual machine device settings to determine whether any associated files point to
locations that cannot be accessed from the new location.
Limitations of Moving a Virtual Machine to a Different Host
You should be aware of certain limitations before you move a virtual machine to a different host system.
n
The guest operating system might not work correctly if you move a virtual machine to a host system
that has significantly different hardware, for example, if you move a virtual machine from a 64-bit host
to a 32-bit host or from a multiprocessor host to a uniprocessor host.
n
Workstation 7.x and later virtual machines support up to eight-way virtual symmetric multiprocessing
(SMP) on multiprocessor host systems. Workstation 10.x and later virtual machines support up to
sixteen-way multiprocessing on multiprocessor host systems. You can assign up to 8 or 16 virtual
processors to virtual machines running on host systems that have at least two logical processors. If you
attempt to assign two processors to a virtual machine that is running on a uniprocessor host system, a
warning message appears. You can disregard this message and assign two processors to the virtual
machine, but you must move it to a host that has at least two logical processors before you can power it
on.
n
You can move a virtual machine from a 32-bit host to a 64-bit host. You cannot move a virtual machine
from a 64-bit host to a 32-bit host unless the 32-bit host has a supported 64-bit processor.
Moving Linked Clones
If you move a linked clone, or if you move its parent virtual machine, make sure that the clone can access the
parent virtual machine.
You cannot power on a linked clone if Workstation Pro cannot locate the original virtual machine.
For example, if you put a linked clone on a laptop and the parent remains on another machine, you can use
the clone only when the laptop connects to the network or drive where the parent is stored.
To use a cloned virtual machine on a disconnected laptop, you must use a full clone, or you must move the
parent virtual machine to the laptop.
Open a Virtual Machine in VMware Workstation Player
®
VMware Workstation Player opens and plays virtual machines created in other VMware products. On
Windows hosts, Workstation Player can also open and play Microsoft Virtual PC and Virtual Server virtual
machines and Symantec LiveState Recovery and system images.
Workstation Player is included with VMware Workstation Pro. When you install Workstation Pro, the
Workstation Player application file is stored with the Workstation Pro program files. On Windows hosts, the
file is called vmplayer.exe. On Linux hosts, the file is called vmplayer.
Note You can download the standalone version of Workstation Player for free from the VMware Web site.
Prerequisites
Verify that the virtual machine is compatible with Workstation Player. See “Configure a Virtual Machine for
Compatibility,” on page 130.
VMware, Inc.
129
Using VMware Workstation Pro
Procedure
1
Start Workstation Player.
Option
Action
From the GUI on a Windows host
Select Start > Programs > VMware > VMware Player.
From the command line on a
Windows host
Type path\vmplayer.exe, where path is the path to the application file.
From a Linux X session
Select VMware Player from the corresponding program menu, such as the
System Tools menu.
From the command line on a Linux
host
Type vmplayer &.
2
Select File > Open a Virtual Machine and browse to the virtual machine configuration (.vmx) file.
3
Select the virtual machine and select Virtual Machine > Power > Play Virtual Machine to start the
virtual machine in Workstation Player .
Configure a Virtual Machine for Compatibility
When you create a virtual machine that you intend to distribute to other users, you should configure the
virtual machine for maximum compatibility with all expected host systems. Users might be limited in their
ability to make changes in a virtual machine so that it is compatible with their host systems.
Procedure
n
Install VMware Tools in the virtual machine.
VMware Tools significantly improves the user’s experience working with the virtual machine.
n
Determine which virtual devices are actually required, and do not include any that are not needed or
useful for the software you are distributing with the virtual machine.
Generic SCSI devices are typically not appropriate.
n
To connect a physical device to a virtual device, use the Auto detect options when you configure the
virtual machine.
The Auto detect options allow the virtual machine to adapt to the user’s system, and they work
whether the host operating system is Windows or Linux. Users who have no physical device receive a
warning message.
n
To connect a CD-ROM or floppy to an image file that you ship with the virtual machine, make sure the
image file is in the same directory as the virtual machine.
A relative path, rather than an absolute path, is used.
n
For both a physical CD-ROM and an image, provide two virtual CD-ROM devices in the virtual
machine.
For example, Workstation Pro does not provide an option to switch a single CD-ROM device between a
physical CD-ROM and an image, and the user cannot switch between them if you plan to ship multiple
images.
n
Choose a reasonable amount of memory to allocate to the virtual machine.
For example, if the host system does not have enough physical memory to support the memory
allocation, the user cannot power on the virtual machine.
n
Choose a reasonable screen resolution for the guest.
A user is likely to find it easier to increase the resolution manually than to deal with a display that
exceeds the user’s physical screen size.
130
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
n
To ensure that CD-ROMs work properly in virtual machines that you intend to distribute and play on
Workstation Pro, configure CD-ROM devices in legacy mode.
Some host operating systems do not support CD-ROMs in non-legacy mode.
n
When you configure a snapshot option for the virtual machine, select Just power off or Revert to
snapshot.
The Revert to snapshot option is useful if you want to distribute a demo virtual machine that resets
itself to a clean state when it is powered off. Workstation Pro does not allow taking snapshots.
Using the Virtual Machine UUID
Each virtual machine has a universal unique identifier (UUID). The UUID is generated when you initially
power on the virtual machine.
You can use the UUID of a virtual machine for system management in the same way that you use the UUID
of a physical computer. The UUID is stored in the SMBIOS system information descriptor, and you can
access it by using standard SMBIOS scanning software, including SiSoftware Sandra or IBM smbios2.
If you do not move or copy the virtual machine to another location, the UUID remains constant. When you
power on a virtual machine that was moved or copied to a new location, you are prompted to specify
whether you moved or copied the virtual machine. If you indicate that you copied the virtual machine, the
virtual machine receives a new UUID.
Suspending and resuming a virtual machine does not trigger the process that generates a UUID. The UUID
in use at the time the virtual machine was suspended remains in use when the virtual machine is resumed,
even if it was copied or moved. You are not prompted to specify whether you moved or copied the virtual
machine until the next time you reboot the virtual machine.
Configure a Virtual Machine to Always Receive a New UUID
You can configure a virtual machine to always receive a new UUID when it is copied or moved so that you
are not prompted when you move or copy the virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
1
Open the virtual machine configuration (.vmx) file in a text editor.
2
Add the uuid.action property to the .vmx file and set it to create.
For example: uuid.action = "create"
Configure a Virtual Machine to Keep the Same UUID
You can configure a virtual machine to always keep the same UUID, even when it is moved or copied. When
a virtual machine is set to always keep the same UUID, you are not prompted when a virtual machine is
moved or copied.
Prerequisites
Power off the virtual machine.
Procedure
1
Open the virtual machine configuration (.vmx) file in a text editor.
2
Add the uuid.action property and set it to keep.
For example: uuid.action = "keep"
VMware, Inc.
131
Using VMware Workstation Pro
Override the Generated UUID for a Virtual Machine
You can override the generated UUID and assign a specific UUID to a virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
1
Open the virtual machine configuration (.vmx) file in a text editor.
2
Search for the line that contains uuid.bios.
The format of the line is uuid.bios = "uuid_value". The UUID is a 128-bit integer. The 16 bytes are
separated by spaces, except for a dash between the eighth and ninth hexadecimal pairs.
For example: uuid.bios = "00 11 22 33 44 55 66 77-88 99 aa bb cc dd ee ff"
3
Replace the existing UUID value with the specific UUID value.
4
Power on the virtual machine.
The virtual machine uses new UUID is used when it reboots.
Configure a Virtual Machine as a VNC Server
You can use Workstation Pro to configure a virtual machine to act as a Virtual Network Computing (VNC)
server so that users on other computers can use a VNC client to connect to the virtual machine. You do not
need to install specialized VNC software in a virtual machine to set it up as a VNC server.
Note You cannot configure a shared or remote virtual machine as a VNC server.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select VNC Connections and select Enable VNC.
3
(Optional) To allow VNC clients to connect to multiple virtual machines on the same host system,
specify a unique port number for each virtual machine.
Use should use a port number in the range from 5901 to 6001. Other applications use certain port
numbers, and some port numbers are privileged. For example, the VMware Management Interface uses
ports 8333 and 8222 and VMware Workstation Server uses port 443. On Linux, only the root user can
listen to ports up to port number 1024.
4
(Optional) Set a password for connecting to the virtual machine from a VNC client.
The password can be up to eight characters long. Because it is not encrypted when the VNC client sends
it, do not use a password that you use for other systems.
5
(Optional) Click View VNC Connections to see a list of the VNC clients that are remotely connected to
the virtual machine and find out how long they have been connected.
6
Click OK to save your changes.
What to do next
If you do not VNC clients use to use the US101 keyboard map (U.S. English) when they connect to the
virtual machine, specify a different language. See “Specify a Language Keyboard Map for VNC Clients,” on
page 133.
132
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
Specify a Language Keyboard Map for VNC Clients
If you set a virtual machine to act as a VNC server, you can specify which language to use for the keyboard
that VNC clients use. By default, the US101 keyboard map (U.S. English) is used.
Prerequisites
n
Verify that the virtual machine is set to act as a VNC server.
n
Determine the language code to use. See “Language Codes,” on page 133.
Procedure
1
In a text editor, open the virtual machine configuration file (.vmx) file for the virtual machine and add
the RemoteDisplay.vnc.enabled and RemoteDisplay.vnc.port properties.
a
Set RemoteDisplay.vnc.enabled to TRUE.
b
Set RemoteDisplay.vnc.port to the port number to use.
For example:
RemoteDisplay.vnc.enabled = "TRUE"
RemoteDisplay.vnc.port = "portnumber"
2
Determine the location of the keymap file to use.
Default keymap files are included in the Workstation Pro installation directory.
3
4
Host System
Keymap File Location
Windows 7, Windows 8, and Windows 10 hosts
C:\ProgramData\VMware\vnckeymap
Linux host
/usr/lib/vmware/vnckeymap
In the virtual machine configuration (.vmx) file, add a property to specify the location of the keymap
file.
Option
Description
To use the default keymap file
included in the Workstation Pro
installation directory
Add RemoteDisplay.vnc.keyMap = "xx", where xx is the code for the
language to use, such as jp for Japanese.
To use a keyboard map file in
another location
Add RemoteDisplay.vnc.keyMapFile = "filepath", where filepath is
the absolute file path.
Start the virtual machine and connect to it from a VNC client.
Language Codes
When you specify a language keyboard map for VNC clients, you must specify a language code.
Table 6‑1. Language Codes
Code
Language
de
German
de-ch
German (Switzerland)
es
Spanish
fi
Finnish
fr
French
fr-be
French (Belgium)
VMware, Inc.
133
Using VMware Workstation Pro
Table 6‑1. Language Codes (Continued)
Code
Language
fr-ch
French (Switzerland)
is
Icelandic
it
Italian
jp
Japanese
nl-be
Dutch (Belgium)
no
Norwegian
pt
Polish
uk
UK English
us
US English
Use a VNC Client to Connect to a Virtual Machine
You can use a VNC client to connect to a running virtual machine. Because VNC software is cross-platform,
you can use virtual machines running on different types of computers.
Workstation Pro does not need to be running to use VNC to connect to a virtual machine. Only the virtual
machine needs to be running, and it can be running in the background.
When you use a VNC client to connect to a virtual machine, some features do not work or are not available.
n
You cannot take or revert to snapshots.
n
You cannot power on, power off, suspend, or resume the virtual machine. You can shut down the guest
operating system. Shutting down might power off the virtual machine.
n
You cannot copy and paste text between the host system and the guest operating system.
n
You cannot change virtual machine settings.
n
Remote display does not work well if you are also using the 3D feature.
Prerequisites
n
Configure the virtual machine as a VNC server. See “Configure a Virtual Machine as a VNC Server,” on
page 132.
n
Determine the machine name or IP address of the host system on which the virtual machine is running
and, if required, the VNC port number and password.
Procedure
1
Install a VNC client on your computer.
Open-source versions of VNC are freely and publicly available. You can use any VNC client, but not a
Java viewer in a browser.
2
Start the VNC client on your computer.
3
Verify that the client is set for hextile encoding.
For example, if you use RealVNC Viewer, select Hextile under the Preferred Encoding option.
4
Set the VNC client to use all colors.
For example, if you use RealVNC Viewer, select Full (all available colours) under the Colour Level
option.
134
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
5
When prompted for the VNC server name, type the name or IP address and the port number of the host
system where the virtual machine is running.
For example: machine_name:port_number
6
Type a password if one is required.
View VNC Connections for a Virtual Machine
When a virtual is configured to act as a VNC server, you can view a list of the VNC clients that are remotely
connected to the virtual machine and find out how long they have been connected.
Prerequisites
Configure the virtual machine to act as a VNC server. See “Configure a Virtual Machine as a VNC Server,”
on page 132.
Procedure
u
Select the virtual machine and select VM > Manage > VNC Connections.
Change the Hardware Compatibility of a Virtual Machine
You can change the hardware compatibility of a virtual machine. All virtual machines have a hardware
version. The hardware version indicates which virtual hardware features that the virtual machine supports,
such as BIOS or EFI, number of virtual slots, maximum number of CPUs, maximum memory configuration,
and other hardware characteristics.
When you upgrade Workstation Pro, you must change the hardware compatibility of virtual machines that
were created in previous versions of Workstation Pro so that they can use the new features in the new
version of Workstation Pro. You can run older versions of virtual machines in the new version of
Workstation Pro, but you will not have the benefits of the new features.
If you want a virtual machine to remain compatible with other VMware products that you are using, you
might not want to change the hardware compatibility to the latest Workstation Pro version.
Note If you decide not to change the hardware compatibility of a virtual machine, you should consider
upgrading to the latest version of VMware Tools to obtain the latest VMware Tools features.
Prerequisites
Familiarize yourself with the considerations and limitations of changing the hardware compatibility of a
virtual machine. See “Considerations for Changing the Hardware Compatibility of a Virtual Machine,” on
page 32.
Procedure
1
Make backup copies of the virtual disk (.vmdk) files.
2
If you are upgrading from a Workstation 5.x virtual machine, or downgrading to a Workstation 5.x
virtual machine, make a note of the NIC settings in the guest operating system.
If you specified a static IP address for the virtual machine, that setting might be changed to automatic
assignment by DHCP after the upgrade.
3
Shut down the guest operating system and power off the virtual machine.
4
Select the virtual machine and select VM > Manage > Change Hardware Compatibility.
VMware, Inc.
135
Using VMware Workstation Pro
5
Follow the prompts in the wizard to change the hardware compatibility of the virtual machine.
When you select a hardware compatibility setting, a list of the VMware products that are compatible
with that setting appears. For example, if you select Workstation 4, 5, or 6, a list of Workstation 6.5 and
later features that are not supported for that Workstation version also appears.
Note Using Workstation 10, you can change the hardware compatibility of a shared or remote virtual
machine. However, you cannot down grade a previously created virtual machine.
6
Power on the virtual machine.
If you upgrade a virtual machine that contains a Windows 98 operating system to a Workstation 6.5 or
later virtual machine, you must install a PCI-PCI bridge driver when you power on the virtual machine.
Note Because Workstation 6.5 and later versions have 32 more PCI-PCI bridges than Workstation 6,
you might need to respond to the prompt 32 or 33 times.
7
If the NIC settings in the guest operating system have changed, use the NIC settings that you recorded
to change them back to their original settings.
8
If the virtual machine does not have the latest version of VMware Tools installed, update VMware
Tools.
You should update VMware Tools to the version included with the latest version of Workstation Pro,
even if you upgraded the virtual machine to an earlier version of Workstation Pro. Do not remove the
older version of VMware Tools before installing the new version.
Note If you are upgrading a virtual machine that runs from a physical disk, you can safely ignore this
message: Unable to upgrade drive_name. One of the supplied parameters is invalid.
Considerations for Changing the Hardware Compatibility of a Virtual Machine
Before you change the hardware compatibility of a virtual machine, you should be aware of certain
considerations and limitations.
136
n
For Workstation 5.x, 6, 6.5, 7.x, and later virtual machines, you can change the version of the original
virtual machine or create a full clone so that the original virtual machine remains unaltered.
n
If you upgrade a Workstation 5.x virtual machine that is compatible with ESX Server to Workstation 6,
6.5, 7.x, or later, you cannot use the Change Hardware Compatibility wizard to later downgrade the
virtual machine to an ESX-compatible virtual machine.
n
When you upgrade a Windows XP, Windows Server 2003, Windows Vista, Windows 7, or Windows 8
virtual machine, the Microsoft product activation feature might require you to reactivate the guest
operating system.
n
Using Workstation 9 or earlier, you cannot change the hardware compatibility of a shared or remote
virtual machine.
n
Using Workstation 10 and later, you can change the hardware compatibility of a shared or remote
virtual machine. However, you cannot down grade a previously created virtual machine.
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
Clean Up a Virtual Hard Disk on Windows Hosts
When you delete files from your virtual machine, the disk space occupied by those files is not immediately
returned to your host system. If a virtual disk has such empty space, you can use the Clean up disks
command to return that space to the hard drive on a Microsoft Windows host.
The Clean up disks command is similar to the Compact command in the Workstation Pro virtual machine
settings and the shrink command provided by VMware Tools. The Clean up disks command has these
advantages:
n
You can use the Clean up disks command with virtual machines that have snapshots or are linked
clones or parents of a linked clone.
n
The Clean up disks command reclaims more disk space than the Compact command.
The Clean up disks command reclaims disk space from the current state of the virtual machine, from
any powered-off snapshots, and from any powered-on snapshots where the guest operating system is
Windows XP or later and you have installed a version of VMware Tools that is compatible with
Workstation 8 or later.
n
Unlike the Defragment command and the shrink command provided by VMware Tools, the Clean up
disks command does not require any extra disk space on the host. The Clean up disks command
operates directly on the virtual disk (.vmdk) files.
Note This command is not available for shared or remote virtual machines.
Prerequisites
n
Verify that you are using a Windows host and that the guest operating system uses NTFS. (NTFS is
standard in Windows XP or later operating systems.) This feature works on all NTFS hard disks but
reclaims more disk space if the operating system is Windows XP or later.
n
Shut down or power off the virtual machine. You cannot use this command while the virtual machine is
powered on or suspended.
Procedure
1
Select the virtual machine in the library.
2
From the menu bar, select VM > Manage > Clean Up Disks.
Workstation Pro calculates how much space can be reclaimed, and either the Clean Up Now button
becomes available or a message appears, explaining why the command is unavailable.
3
Click Clean Up Now to start the process.
A dialog box reports the progress of the clean-up process.
Export a Virtual Machine to OVF Format
You can export a virtual machine from Workstation Pro to OVF format.
OVF is a platform-independent, efficient, extensible, and open packaging and distribution format for virtual
machines. OVF format provides a complete specification of the virtual machine, including the full list of
required virtual disks and the required virtual hardware configuration, including CPU, memory,
networking, and storage. An administrator can quickly provision an OVF-formatted virtual machine with
little or no intervention.
VMware, Inc.
137
Using VMware Workstation Pro
You can also use the standalone OVF Tool to convert a virtual machine that is in VMware runtime format to
an OVF virtual machine. The standalone version of the OVF Tool is installed in the Workstation Pro
installation directory under OVFTool. See the OVF Tool User Guide on the VMware Web site for information
about using the OVF Tool.
Prerequisites
n
Verify that the virtual machine is not encrypted. You cannot export an encrypted virtual machine to
OVF format.
n
Verify that the virtual machine is powered off.
Procedure
1
Select the virtual machine and select File > Export to OVF.
2
Type a name for the OVF file and specify a directory in which to save it.
3
Click Save to start the OVF export process.
The export process can take several minutes. A status bar indicates the progress of the export process.
Writing and Debugging Applications That Run In Virtual Machines
Application developers can use APIs, SDKs, and IDEs to write and debug applications that run in virtual
machines.
VIX API
You can use the VIX API to write programs that automate virtual machine
operations. The API is easy to use and useful for both script writers and
application programmers. Functions enable you to power virtual machines
on and off, register them, and run programs to manipulate files in the guest
operating systems. Additional language bindings are available for Perl,
COM, and shell scripts (for example, vmrun).
VMCI Sockets Interface
VMCI Sockets is a network sockets API for the Virtual Machine
Communication Interface. It provides a fast means of communication
between a host and its guest virtual machines. This API is well-suited for
client-server applications. See the VMCI Sockets Programming Guide.
Integrated Virtual
Debuggers for Eclipse
The integrated development environment (IDE) plug-ins provide a
configurable interface between virtual machines and Eclipse. They let you
test, run, and debug programs in virtual machines. See the Integrated Virtual
Debugger for Eclipse Developer’s Guide.
Debugging Over a Virtual Serial Port
You can use virtual machines to debug kernel code on one system without the need for two physical
computers, a modem, or a serial cable. You can use Debugging Tools for Windows (WinDbg) or Kernel
Debugger (KD) to debug kernel code in a virtual machine over a virtual serial port.
You can Download Debugging Tools for Windows from the Windows Hardware Developer Central
(WHDC) Web site.
Debug an Application in a Virtual Machine from a Windows Host
You can debug an application in a virtual machine from a Windows host system over a virtual serial port.
Prerequisites
n
138
Verify that Debugging Tools for Windows is installed on the host system and that it supports
debugging over a pipe. It must be version 5.0.18.0 or later.
VMware, Inc.
Chapter 6 Configuring and Managing Virtual Machines
n
Verify that a serial port is configured for the virtual machine. See “Configuring Virtual Ports,” on
page 156.
Procedure
1
Configure the named pipe on the target virtual machine and select This end is the server.
2
Power on the virtual machine.
3
Select the virtual machine, select VM > Removable Devices, and verify that the serial port is connected.
4
If the serial port is not reported as \\.\pipe\namedpipe, select the virtual serial port and click Connect.
5
On the host system, type the debugger command.
For example: debugger -k com:port=\\.\pipe\namedpipe,pipe
The debugger value is WinDbg or KD.
6
Press Enter to start debugging.
Debug an Application in a Virtual Machine from Another Virtual Machine
You can use the WinDbg or KD debugger to debug an application in a virtual machine from another virtual
machine over a serial port.
Prerequisites
n
Download and install WinDbg or KD in the Windows guest operating system that you plan to use as
the debugger virtual machine.
n
Verify that a serial port is configured for the virtual machine. See “Configuring Virtual Ports,” on
page 156.
Procedure
1
Power on both virtual machines.
2
Select the virtual machine and select VM > Removable Devices to verify that the serial port is
connected.
3
If the serial port is not connected, select the virtual serial port and click Connect.
4
In the debugger virtual machine, start debugging by using WinDbg or KD.
VMware, Inc.
139
Using VMware Workstation Pro
140
VMware, Inc.
VMware Workstation Server Log Files
7
VMware Workstation Server saves messages in log files. Refer to these log files if you need to audit or
troubleshoot a problem with remote access or remote authorization.
Table 7‑1. Workstation Server Log Files
Host System
Location
Windows Server 2008 R2, Windows
Server 2012 R2, Windows 7,
Windows 8, and Windows 10 hosts
C:\ProgramData\VMware\hostd\hostd-n.log
Linux hosts
/var/log/vmware/hostd-n.log
On Linux hosts, security-related information, such as authorization attempts, is sent to the system messages
log.
VMware, Inc.
141
Using VMware Workstation Pro
142
VMware, Inc.
Configuring and Managing Devices
8
You can use Workstation Pro to add devices to virtual machines, including DVD and CD-ROM drives,
floppy drives, USB controllers, virtual and physical hard disks, parallel and serial ports, generic SCSI
devices, and processors. You can also modify settings for existing devices.
This chapter includes the following topics:
n
“Configuring DVD, CD-ROM, and Floppy Drives,” on page 143
n
“Configuring a USB Controller,” on page 145
n
“Configuring and Maintaining Virtual Hard Disks,” on page 147
n
“Adding a Physical Disk to a Virtual Machine,” on page 154
n
“Configuring Virtual Ports,” on page 156
n
“Configuring Generic SCSI Devices,” on page 161
n
“Configuring Sixteen-Way Virtual Symmetric Multiprocessing,” on page 163
n
“Configuring Keyboard Features,” on page 164
n
“Modify Hardware Settings for a Virtual Machine,” on page 173
Configuring DVD, CD-ROM, and Floppy Drives
You can add up to 4 IDE devices, up to 60 SCSI devices, and up to 120 SATA devices (4 controllers with 30
devices per controller) to a virtual machine. Any of these devices can be a virtual or physical hard disk or
DVD or CD-ROM drive. By default, a floppy drive is not connected when a virtual machine powers on.
A virtual machine can read data from a DVD disc. Workstation Pro does not support playing DVD movies
in a virtual machine. You might be able to play a movie if you use a DVD player application that does not
require video overlay support in the video card.
Add a DVD or CD-ROM Drive to a Virtual Machine
You can add one or more DVD or CD-ROM drives to a virtual machine. You can connect the virtual DVD or
CD-ROM drive to a physical drive or an ISO image file.
You can configure the virtual DVD or CD-ROM drive as an IDE or a SCSI device, regardless of the type of
physical drive that you connect it to. For example, if the host has an IDE CD-ROM drive, you can set up the
virtual machine drive as either SCSI or IDE and connect it to the host drive.
Do not configure legacy emulation mode unless you experience problems with normal mode. See
“Configure Legacy Emulation Mode for a DVD or CD-ROM Drive,” on page 145 for more information.
VMware, Inc.
143
Using VMware Workstation Pro
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select DVD/CD Drive.
4
Select a physical drive or ISO image file to connect to the drive.
Option
5
Description
Use physical drive
The virtual machine uses a physical drive.
Use ISO image
The drive connects to an ISO image file.
Configure the physical drive or ISO image file.
Option
Description
Physical drive
Select a specific drive, or select Auto detect to allow Workstation Pro to
auto-detect the drive to use.
ISO image file
Type the path or browse to the location of the ISO image file.
6
To connect the drive or ISO image file to the virtual machine when the virtual machine powers on,
select Connect at power on.
7
Click Finish to add the drive to the virtual machine.
The drive initially appears as an IDE drive to the guest operating system.
8
(Optional) To change which SCSI or IDE device identifier to use for the drive, select the drive and click
Advanced.
9
Click OK to save your changes.
Add a Floppy Drive to a Virtual Machine
You can configure a virtual floppy drive to connect to a physical floppy drive or an existing or blank floppy
image file. You can add up to two floppy drives to a virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select Floppy Drive.
4
Select the floppy media type.
5
144
Option
Description
Use a physical floppy drive
The virtual machine uses a physical floppy drive.
Use a floppy image
The drive connects to an floppy image (.flp) file.
Create a blank floppy image
The drive connects to a blank floppy image (.flp) file that you create.
If you selected the physical floppy drive media type, select a specific floppy drive or select Auto detect
to allow Workstation Pro to auto-detect the drive to use.
VMware, Inc.
Chapter 8 Configuring and Managing Devices
6
If you selected the floppy image or blank floppy image media type, type the name or browse to the
location of a floppy image (.flp) file.
7
To connect the drive or floppy image file to the virtual machine when the virtual machine powers on,
select Connect at power on.
8
Click Finish to add the drive to the virtual machine.
9
Click OK to save your changes.
10
If you added a second floppy drive to the virtual machine, enable the drive in the virtual machine BIOS.
a
Select the virtual machine and select VM > Power > Power On to BIOS.
b
Select Legacy Diskette B: and use the plus (+) and minus (-) keys on the numerical keypad to select
the type of floppy drive to use.
c
Press F10 to save the settings.
Configure Legacy Emulation Mode for a DVD or CD-ROM Drive
Use legacy emulation mode to work around direct communication problems between a guest operating
system and a DVD or CD-ROM drive.
In legacy emulation mode, you can read only from data discs in the DVD or CD-ROM drive. Legacy
emulation mode does not provide the other capabilities of normal mode. In normal mode, the guest
operating system communicates directly with the CD-ROM or DVD drive. This direct communication
enables you to read multisession CDs, perform digital audio extraction, view videos, and use CD and DVD
writers to burn discs.
If you run more than one virtual machine at a time, and if their CD-ROM drives are in legacy emulation
mode, you must start the virtual machines with their CD-ROM drives disconnected. By disconnecting the
CD-ROM drives in the virtual machines, you prevent multiple virtual machines from being connected to the
CD-ROM drive at the same time.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select the drive and click Advanced.
3
Select Legacy emulation and click OK.
On Windows hosts, this option is deselected by default. On Linux hosts that have IDE drives, the
default setting depends on whether the ide-scsi module is loaded in the kernel. The ide-scsi module
must be loaded, or you must use a physical SCSI drive, to connect directly to the DVD or CD-ROM
drive.
4
Click OK to save your changes.
Configuring a USB Controller
A virtual machine must have a USB controller to use USB devices and smart card readers. To use a smart
card reader, a virtual machine must have a USB controller regardless of whether the smart card reader is
actually a USB device.
Workstation Pro provides a USB controller to support the following types of USB devices.
n
USB 1.1 UHCI (Universal Host Controller Interface) is supported for all virtual machine hardware
versions.
n
USB 2.0 EHCI (Enhanced Host Controller Interface) controllers are supported if the virtual machine
hardware is compatible with Workstation 6 and later virtual machines.
VMware, Inc.
145
Using VMware Workstation Pro
n
USB 3.0 xHCI (Extensible Host Controller Interface) support is available for Linux guests running
kernel version 2.6.35 or later and for Windows 8 guests. The virtual machine hardware must be
compatible with Workstation 8 or later virtual machines.
For USB 2.0 or 3.0 support, you must select USB 2.0 or 3.0 compatibility by configuring virtual machine
settings for the USB controller. USB 2.0 and 3.0 devices are high-speed devices that include the latest models
of USB flash drives, USB hard drives, iPods, and iPhone.
If you select USB 2.0 compatibility, when a USB 2.0 device connects to a USB port on the host system, the
device connects to the EHCI controller and operates in USB 2.0 mode. A USB 1.1 device connects to the
UHCI controller and operates in USB 1.1 mode. If you enable USB 3.0, the xHCI controller can support all
USB devices, including USB 1.1, 2.0, and 3.0 devices.
Although the host operating system must support USB, you do not need to install device-specific drivers for
USB devices in the host operating system to use those devices only in the virtual machine. Linux kernels
earlier than 2.2.17 do not support USB.
VMware has tested a variety of USB devices. If the guest operating system has the appropriate drivers, you
can use many different USB devices, including PDAs, Smart phones, printers, storage devices, scanners,
MP3 players, digital cameras, memory card readers, and isochronous transfer devices, such as webcams,
speakers, and microphones.
You can connect USB human interface devices (HIDs), such as the keyboard and mouse, to a virtual machine
by enabling the Show all USB input devices option. If you do not select this option, these devices do not
appear in the Removable Devices menu and are not available to connect to the virtual machine, even
though they are plugged in to USB ports on the host system.
See “Connect USB HIDs to a Virtual Machine,” on page 92 for information on connecting HIDs.
Add a USB Controller to a Virtual Machine
A USB controller is required to use a smart card in a virtual machine, regardless of whether the smart card
reader is a USB device. You can add one USB controller to a virtual machine.
When you create a virtual machine in Workstation Pro, a USB controller is added by default. If you remove
the USB controller, you can add it back.
Note Shared and remote virtual machines are created without a USB controller by default. You can add a
USB controller manually after you finish creating a shared or remote virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
146
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
In the New Hardware wizard, select USB Controller.
VMware, Inc.
Chapter 8 Configuring and Managing Devices
4
Configure the USB connection settings.
You can select multiple settings.
Note You typically cannot configure USB connection settings for a shared or remote virtual machine.
5
Option
Description
USB Compatibility
Selecting USB 2.0 or 3.0 enables support for isochronous USB devices,
including Web cams, speakers, and microphones.
Automatically connect new USB
devices
Connect new USB devices to the virtual machine. If this setting is not
selected, new USB devices are connected only to the host system.
Show all USB input devices
Human interface devices (HIDs), such as USB 1.1 and 2.0 mouse and
keyboard devices, appear in the Removable Devices menu. Icons for HIDs
appear in the status bar. An HID that is connected to the guest operating
system is not available to the host system. The virtual machine must be
powered off when you change this setting.
Share Bluetooth devices with the
virtual machine
Enable support for Bluetooth devices.
Click Finish to add the USB controller.
Enable Support for Isochronous USB Devices
Modems and certain streaming data devices, such as speakers and webcams, do not work properly in a
virtual machine unless you enable support for isochronous USB devices.
Prerequisites
n
Verify that the guest operating system supports USB 2.0 devices or 3.0 devices.
n
On a Windows XP guest operating system, verify that the latest service pack is installed. If you use
Windows XP with no service packs, the driver for the EHCI controller cannot be loaded.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select USB Controller.
3
From the USB Compatibility list, select USB 2.0 or USB 3.0.
4
Option
Description
USB 2.0
Available if the virtual machine hardware is compatible with Workstation
6 and later virtual machines.
USB 3.0
Available for Linux guests running kernel version 2.6.35 or later and for
Windows 8 guests. The virtual machine hardware must be compatible with
Workstation 8 and later virtual machines.
Click OK to save your changes.
Configuring and Maintaining Virtual Hard Disks
You can use Workstation Pro to configure virtual hard disk storage for virtual machines.
A virtual disk is a file or set of files that appears as a physical disk drive to a guest operating system. The
files can be on the host system or on a remote computer. When you configure a virtual machine to use a
virtual disk, you can install a new operating system onto the virtual disk without repartitioning a physical
disk or rebooting the host.
VMware, Inc.
147
Using VMware Workstation Pro
The New Virtual Machine wizard creates a virtual machine that has one disk drive. You can modify virtual
machine settings to add more disk drives to a virtual machine, remove disk drives from a virtual machine,
and change certain settings for the existing disk drives.
n
Configuring a Virtual Hard Disk on page 148
You can configure virtual hard disks as IDE or SATA disks for any guest operating system. You can
also set up a virtual hard disk as a SCSI disk for any guest operating system that has a driver for the
LSI Logic or BusLogic SCSI adapter. You determine which SCSI adapter to use when you create a
virtual machine.
n
Compact a Virtual Hard Disk on page 151
Compacting a virtual hard disk reclaims unused space in the virtual disk. If a disk has empty space,
this process reduces the amount of space the virtual disk occupies on the host drive.
n
Expand a Virtual Hard Disk on page 151
You can add storage space to a virtual machine by expanding its virtual hard disk.
n
Defragment a Virtual Hard Disk on page 152
Like physical disk drives, virtual hard disks can become fragmented. Defragmenting disks rearranges
files, programs, and unused space on the virtual hard disk so that programs run faster and files open
more quickly. Defragmenting does not reclaim unused space on a virtual hard disk.
n
Remove a Virtual Hard Disk from a Virtual Machine on page 152
Removing a virtual hard disk disconnects it from a virtual machine. It does not delete files from the
host file system.
n
Using Virtual Disk Manager on page 153
Virtual Disk Manager (vmware-vdiskmanager.exe) is a Workstation Pro utility that you can use to
create, manage, and modify virtual disk files from the command line or in scripts.
n
Using Legacy Virtual Disks on page 153
You can use the current version of Workstation Pro in a mixed environment with virtual machines that
were created with earlier versions or with other VMware products.
n
Using Lock Files to Prevent Consistency Problems on Virtual Hard Disks on page 153
A running virtual machine creates lock files to prevent consistency problems on virtual hard disks.
Without locks, multiple virtual machines might read and write to the disk, causing data corruption.
n
Moving a Virtual Hard Disk to a New Location on page 154
A key advantage of virtual hard disks is their portability. Because the virtual hard disks are stored as
files on the host system or a remote computer, you can move them easily to a new location on the same
computer or to a different computer.
Configuring a Virtual Hard Disk
You can configure virtual hard disks as IDE or SATA disks for any guest operating system. You can also set
up a virtual hard disk as a SCSI disk for any guest operating system that has a driver for the LSI Logic or
BusLogic SCSI adapter. You determine which SCSI adapter to use when you create a virtual machine.
The files that make up an IDE, SATA, or SCSI virtual hard disk can be stored on an IDE hard disk, SATA
hard disk, or on a SCSI hard disk. They can also be stored on other types of fast-access storage media.
To use SCSI hard disks in a 32-bit Windows XP virtual machine, you must download a special SCSI driver
from the VMware Web site. Follow the instructions on the Web site to use the driver with a fresh installation
of Windows XP.
148
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Growing and Allocating Virtual Disk Storage Space
IDE and SCSI virtual hard disks can be up to 8TB. Depending on the size of the virtual hard disk and the
host operating system, Workstation Pro creates one or more files to hold each virtual disk.
Virtual hard disk files include information such as the operating system, program files, and data files.
Virtual disk files have a .vmdk extension.
By default, the actual files that the virtual hard disk uses start small and grow to their maximum size as
needed. The main advantage of this approach is the smaller file size. Smaller files require less storage space
and are easier to move to a new location, but it takes longer to write data to a disk configured in this way.
You can also configure virtual hard disks so that all of the disk space is allocated when the virtual disk is
created. This approach provides enhanced performance and is useful if you are running performancesensitive applications in the virtual machine.
Regardless of whether you allocate all disk space in advance, you can configure the virtual hard disk to use
a set of files limited to 2GB per file. Use this option if you plan to move the virtual hard disk to a file system
that does not support files larger than 2GB.
Add a New Virtual Hard Disk to a Virtual Machine
To increase storage space, you can add a new virtual hard disk to a virtual machine. You can add up to four
IDE devices and up to 60 SCSI devices. Any of these devices can be a virtual or physical hard disk or DVD
or CD-ROM drive.
Virtual hard disks are stored as files on the host computer or on a network file server. A virtual IDE drive or
SCSI drive can be stored on a physical IDE drive or on a physical SCSI drive.
As an alternative to adding a new virtual hard disk, you can expand the existing virtual hard disk. See
“Expand a Virtual Hard Disk,” on page 151.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
In the New Hardware wizard, select Hard Disk.
4
Select Create a new virtual disk.
5
Select the disk type.
VMware, Inc.
Option
Description
IDE
Create an IDE device. You can add up to four IDE devices to a virtual
machine.
SCSI
Create a SCSI device. You can add up to 60 SCSI devices to a virtual
machine.
SATA
Create a SATA device. You can add up to 120 SATA devices: four
controllers and 30 devices per controller.
149
Using VMware Workstation Pro
6
7
(Optional) To exclude the disk from snapshots, select Independent for the mode and select a
persistence option.
Option
Description
Persistent
Disks in persistent mode behave like conventional disks on a physical
computer. All data written to a disk in persistent mode is written
permanently to the disk.
Nonpersistent
Changes to disks in nonpersistent mode are discarded when you power off
or reset the virtual machine. With nonpersistent mode, you always restart
the virtual machine with a virtual disk in the same state. Changes to the
disk are written to and read from a redo log file that is deleted when you
power off or reset the virtual machine.
Set the capacity for the new virtual hard disk.
You can set a size between 0.001 GB and 8 TB for a virtual disk.
8
Specify how to allocate the disk space.
Option
Description
Allocate all disk space now
Allocating all of the disk space when you create the virtual hard disk can
enhance performance, but it requires all of the physical disk space to be
available now. If you do not select this setting, the virtual disk starts small
and grows as you add data to it.
Store virtual disk as a single file
Select this option if the virtual disk is stored on a file system that does not
have a file size limitation.
Split virtual disk into multiple files
Select this option if the virtual disk is stored on a file system that has a file
size limitation. When you split a virtual disk less than 950 GB, a series of 2
GB virtual disk files are created. When you split a virtual disk greater than
950 GB, two virtual disk files are created. The maximum size of the first
virtual disk file is 1.9 TB and the second virtual disk file stores the rest of
the data.
9
Accept the default filename and location, or browse to and select a different location.
10
Click Finish to add the new virtual hard disk.
The wizard creates the new virtual hard disk. The disk appears to the guest operating system as a new,
blank hard disk.
11
Click OK to save your changes.
12
Use the guest operating system tools (such as the Windows Management tool or the fdisk command in
Linux) to partition and format the new drive.
Add an Existing Virtual Hard Disk to a Virtual Machine
You can reconnect an existing virtual hard disk that was removed from a virtual machine.
Procedure
150
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select Hard Disk.
4
Select Use an existing virtual disk.
5
Specify the path name and filename for the existing disk file.
6
Click Finish to add the existing virtual hard disk.
7
Click OK to save your changes.
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Compact a Virtual Hard Disk
Compacting a virtual hard disk reclaims unused space in the virtual disk. If a disk has empty space, this
process reduces the amount of space the virtual disk occupies on the host drive.
Prerequisites
n
Power off the virtual machine.
n
Verify that the virtual disk is not mapped or mounted. You cannot compact a virtual disk while it is
mapped or mounted.
n
Verify that the disk space is not preallocated for the virtual hard disk. If the disk space was preallocated,
you cannot compact the disk.
n
If the virtual hard disk is an independent disk, verify that it is in persistent mode.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select the virtual hard disk to compact.
3
Select Utilities > Compact.
4
Click OK after the disk compacting process is complete.
Expand a Virtual Hard Disk
You can add storage space to a virtual machine by expanding its virtual hard disk.
When you expand a virtual hard disk, the added space is not immediately available to the virtual machine.
To make the added space available, you must use a disk management tool to increase the size of the existing
partition on the virtual hard disk to match the expanded size.
The disk management tool that you use depends on the virtual machine guest operating system. Many
operating systems, including Windows Vista, Windows 7, and Windows 8 and some versions of Linux,
provide built-in disk management tools that can resize partitions. Third-party disk management tools are
also available, such as EASEUS Partition Master, Acronis Disk Director, and the open-source tool GParted.
When you expand the size of a virtual hard disk, the sizes of partitions and file systems are not affected.
As an alternative to expanding a virtual hard disk, you can add a new virtual hard disk to the virtual
machine. See “Add a New Virtual Hard Disk to a Virtual Machine,” on page 149.
Prerequisites
n
Power off the virtual machine.
n
Verify that the virtual disk is not mapped or mounted. You cannot expand a virtual disk while it is
mapped or mounted.
n
Verify that the virtual machine has no snapshots.
n
Verify that the virtual machine is not a linked clone or the parent of a linked clone.
You can determine whether a virtual machine is a linked clone by the virtual machine name string on
the summary page. If the string includes "Clone of: virtual machine name", the virtual machine is a linked
clone. If the string includes "Snapshot: Snapshot for virtual machine name", the virtual machine is a
parent of a linked clone.
Procedure
1
VMware, Inc.
Select the virtual machine and select VM > Settings.
151
Using VMware Workstation Pro
2
On the Hardware tab, select the virtual hard disk to expand.
3
Select Utilities > Expand.
4
Set the new maximum size for the virtual disk.
You can set a size between 0.001 GB and 8192 GB for a virtual disk.
5
Select Expand.
6
Click OK after the disk expansion process is complete.
What to do next
Use a disk management tool to increase the disk partition size to match the expanded virtual disk size.
Defragment a Virtual Hard Disk
Like physical disk drives, virtual hard disks can become fragmented. Defragmenting disks rearranges files,
programs, and unused space on the virtual hard disk so that programs run faster and files open more
quickly. Defragmenting does not reclaim unused space on a virtual hard disk.
Defragmenting disks can take considerable time.
Prerequisites
n
Verify that there is adequate free working space on the host system. For example, if the virtual hard
disk is contained in a single file, there must be free space equal to the size of the virtual disk file. Other
virtual hard disk configurations require less free space.
n
Verify that the virtual disk is not mapped or mounted. You cannot defragment a virtual disk while it is
mapped or mounted.
Procedure
1
Run a disk defragmentation utility in the guest operating system.
2
If disk space is not preallocated for the virtual hard disk, use the Workstation Pro defragmentation tool
to defragment it.
3
a
Power off the virtual machine.
b
Select the virtual machine and select VM > Settings.
c
On the Hardware tab, select Hard Disk.
d
Select Utilities > Defragment.
e
When the defragmentation process is finished, click OK.
Run a disk defragmentation utility on the host system.
Remove a Virtual Hard Disk from a Virtual Machine
Removing a virtual hard disk disconnects it from a virtual machine. It does not delete files from the host file
system.
After you remove a virtual hard disk from a virtual machine, you can map or mount the disk to the host
system and copy data from the guest operating system to the host without powering on the virtual machine
or starting Workstation Pro. You can also add the disk to another virtual machine.
Procedure
152
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select the virtual hard disk and click Remove.
VMware, Inc.
Chapter 8 Configuring and Managing Devices
3
Click OK to save your changes.
Using Virtual Disk Manager
Virtual Disk Manager (vmware-vdiskmanager.exe) is a Workstation Pro utility that you can use to create,
manage, and modify virtual disk files from the command line or in scripts.
Virtual Disk Manager is included in the VMware Workstation program files directory when Workstation Pro
is installed. With Virtual Disk Manager, you can enlarge a virtual disk so that its maximum capacity is larger
than it was when you created it. This feature is useful if you need more disk space in a given virtual
machine, but do not want to add another virtual disk or use ghosting software to transfer the data on a
virtual disk to a larger virtual disk.
You can also use Virtual Disk Manager to change how disk space is allocated for a virtual hard disk. You can
preallocate all the disk space in advance or configure the disk to grow as more disk space is needed. If you
allocate all the disk space but later need to reclaim some hard disk space on the host system, you can convert
the preallocated virtual disk into a growable disk. The new virtual disk is still large enough to contain all the
data in the original virtual hard disk. You can also change whether the virtual hard disk is stored in a single
file or split into 2GB files.
Using Legacy Virtual Disks
You can use the current version of Workstation Pro in a mixed environment with virtual machines that were
created with earlier versions or with other VMware products.
Although you can use the current version of Workstation Pro to power on virtual machines that were
created with older versions or other VMware products, many new features of Workstation Pro are not
available in older virtual machines.
If you decide not to upgrade a virtual machine, you should still upgrade VMware Tools to the latest version
in the guest operating system. Do not remove the older version of VMware Tools before installing the new
version.
You can also use the current version of Workstation to create a version 5.x and later virtual machine.
If you have a Workstation 2, 3, or 4 virtual machine that you want to use with the current version of
Workstation, upgrade the virtual machine to at least Workstation version 5 before you attempt to power it
on.
Using Lock Files to Prevent Consistency Problems on Virtual Hard Disks
A running virtual machine creates lock files to prevent consistency problems on virtual hard disks. Without
locks, multiple virtual machines might read and write to the disk, causing data corruption.
Lock files have a .lck suffix and are created in subdirectories in the same directory as the virtual disk
(.vmdk) files. A locking subdirectory and lock file are created for .vmdk files, .vmx files, and .vmem files.
A unified locking method is used on all host operating systems so that files shared between them are fully
protected. For example, if one user on a Linux host tries to power on a virtual machine that is already
powered on by another user with a Windows host, the lock files prevent the second user from powering on
the virtual machine.
When a virtual machine powers off, it removes the locking subdirectories and the lock files. If the virtual
machine cannot remove these locking controls, one or more stale lock files might remain. For example, if the
host system fails before the virtual machine removes its locking controls, stale lock files remain.
When the virtual machine restarts, it scans any locking subdirectories for stale lock files and, when possible,
removes them. A lock file is considered stale if the lock file was created on the same host system that is now
running the virtual machine and the process that created the lock is no longer running. If either of these
conditions is not true, a dialog box warns you that the virtual machine cannot be powered on. You can
delete the locking directories and their lock files manually.
VMware, Inc.
153
Using VMware Workstation Pro
Locks also protect physical disk partitions. Because the host operating system is not aware of this locking
convention, it does not recognize the lock. For this reason, you should install the physical disk for a virtual
machine on the same physical disk as the host operating system.
Moving a Virtual Hard Disk to a New Location
A key advantage of virtual hard disks is their portability. Because the virtual hard disks are stored as files on
the host system or a remote computer, you can move them easily to a new location on the same computer or
to a different computer.
For example, you can use Workstation Pro on a Windows host system to create virtual hard disks, move the
disks to a Linux computer, and use the disks with Workstation Pro on a Linux host system.
Adding a Physical Disk to a Virtual Machine
In some circumstances, you might need to give a virtual machine direct access to a physical disk or unused
partition on the host computer.
A physical disk directly accesses an existing local disk or partition. You can use physical disks to run one or
more guest operating systems from existing disk partitions.
Workstation Pro supports physical disks up to 2TB capacity. Booting from an operating system already set
up on an existing SCSI disk or partition is not supported.
Running an operating system natively on the host computer and switching to running it inside a virtual
machine is similar to pulling the hard drive out of one computer and installing it in a second computer that
has a different motherboard and hardware. The steps you take depend on the guest operating system in the
virtual machine. In most cases, a guest operating system that is installed on a physical disk or unused
partition cannot boot outside of the virtual machine, even though the data is available to the host system.
See the Dual-Boot Computers and Virtual Machines technical note on the VMware Web site for information
about using an operating system that can also boot outside of a virtual machine.
After you configure a virtual machine to use one or more partitions on a physical disk, do not modify the
partition tables by running fdisk or a similar utility in the guest operating system. If you use fdisk or a
similar utility on the host operating system to modify the partition table of the physical disk, you must
recreate the virtual machine physical disk. All files that were on the physical disk are lost when you modify
the partition table.
Important You cannot use a physical disk to share files between the host computer and a guest operating
system. Making the same partition visible to both the host computer and a guest operating system can cause
data corruption. Instead, use shared folder to share files between the host computer and a guest operating
system.
Prepare to Use a Physical Disk or Unused Partition
You must perform certain tasks before you configure a virtual machine to use a physical disk or unused
partition on the host system.
You must perform these tasks before you run the New Virtual Machine wizard to add a physical disk to a
new virtual machine, and before you add a physical disk to an existing virtual machine.
154
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Procedure
1
If a partition is mounted by the host or in use by another virtual machine, unmount it.
The virtual machine and guest operating system access a physical disk partition while the host
continues to run its operating system. Corruption is possible if you allow the virtual machine to modify
a partition that is simultaneously mounted on the host operating system.
Option
Description
The partition is mapped to a
Windows Server 2008 R2 or
Windows Server 2012 R2 host
a
The partition is mapped to a
Windows 7, Windows 8, or Windows
10 host
a
b
c
b
c
d
e
2
Select Start > Settings > Control Panel > Administrative Tools >
Computer Management > Storage > Disk Management.
Select a partition and select Action > All Tasks > Change Drive Letter
and Paths.
Click Remove.
Select Start > Control Panel.
In the menu bar, click the arrow next to Control Panel.
From the drop-down menu, select All Control Panel Items >
Administrative Tools > Computer Management > Storage > Disk
Management (Local).
Right-click a partition and choose Change Drive Letter and Paths.
Click Remove and OK.
Check the guest operating system documentation regarding the type of partition on which the guest
operating system can be installed.
On Windows 7 hosts, you cannot use the system partition, or the physical disk that contains it, in a
virtual machine. Other operating systems, such as Linux, can be installed on a primary or an extended
partition on any part of the drive.
3
If the physical partition or disk contains data that you need in the future, back up the data.
4
If you use a Windows host IDE disk in a physical disk configuration, verify that it is not configured as
the slave on the secondary IDE channel if the master on that channel is a CD-ROM drive.
5
On a Linux host, set the device group membership or device ownership appropriately.
a
Verify that the master physical disk device or devices are readable and writable by the user who
runs Workstation Pro.
Physical devices, such as /dev/hda (IDE physical disk) and /dev/sdb (SCSI physical disk), belong to
group-id disk on most distributions. If this is the case, you can add Workstation Pro users to the
disk group. Another option is to change the owner of the device. Consider all the security issues
involved in this option.
b
Grant Workstation Pro users access to all /dev/hd[abcd] physical devices that contain operating
systems or boot managers.
When permissions are set correctly, the physical disk configuration files in Workstation Pro control
access. This reliability provides boot managers access to configuration files and other files they
might need to boot operating systems. For example, LILO needs to read /boot on a Linux partition
to boot a non-Linux operating system that might be on another drive.
Add a Physical Disk to an Existing Virtual Machine
You can add a physical disk to an existing virtual machine by modifying virtual machine hardware settings.
To add a physical disk to a new virtual machine, run the New Virtual Machine wizard and select the
Custom option. See “Create a New Virtual Machine on the Local Host,” on page 50.
Note You cannot add a physical disk to a shared or remote virtual machine.
VMware, Inc.
155
Using VMware Workstation Pro
Prerequisites
n
Perform the appropriate preparation tasks. See “Prepare to Use a Physical Disk or Unused Partition,”
on page 47.
n
Power off the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
Select Hard Disk.
4
Select Use a physical disk.
5
If a warning message appears, click OK.
6
Select the physical hard disk to use from the drop-down menu.
7
Select whether to use the entire disk or individual partitions.
8
If you selected individual partitions, select the partitions.
The virtual machine can access only the partitions that you select. The guest operating system might be
able to detect other partitions, but you cannot mount, access, or format those partitions.
9
Accept the default filename and location for the virtual disk (.vmdk) file, or browse to a different
location.
10
Click Finish to add the physical disk to the virtual machine.
11
Use the tools in the guest operating system to format any partitions on the physical disk that are not
formatted for the guest operating system.
Configuring Virtual Ports
You can add virtual parallel (LPT) ports and virtual serial (COM) ports to a virtual machine. A
Workstation Pro virtual machine can use up to three parallel ports and up to four virtual serial ports.
n
Add a Virtual Parallel Port to a Virtual Machine on page 157
You can attach up to three bidirectional parallel (LPT) ports to a virtual machine. Virtual parallel ports
can output to parallel ports or to files on the host system.
n
Configure a Virtual Parallel Port on a Linux 2.6.x Kernel Host on page 157
Linux 2.6.x kernels that support parallel ports use the modprobe modulename and modprobe parport_pc
modules. Workstation Pro requires that the parallel port PC-style hardware option
(CONFIG_PARPORT_PC) is built and loaded as a kernel module.
n
Configure Permissions for a Parallel Port Device on a Linux Host on page 158
Some Linux distributions do not grant a virtual machine access to the lp and parport devices by
default. If this is the case on your Linux host system, you must add the VMware user to the group that
has permission to access those devices.
n
Troubleshoot ECR Errors for Parallel Ports on page 158
A parallel port on the host system does not have an Extended Control Register (ECR).
n
Add a Virtual Serial Port to a Virtual Machine on page 159
You can add up to four serial (COM) ports to a virtual machine. Virtual serial ports can output to
physical serial ports, files, or named pipes.
n
Change the Input Speed of a Serial Connection on page 160
You can increase the speed of a serial connection over a pipe to a virtual machine.
156
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Add a Virtual Parallel Port to a Virtual Machine
You can attach up to three bidirectional parallel (LPT) ports to a virtual machine. Virtual parallel ports can
output to parallel ports or to files on the host system.
Parallel ports are used for a variety of devices, including printers, scanners, dongles, and disk drives.
Although these devices can connect to the host system, only printers can reliably connect to virtual
machines by using parallel ports.
Workstation Pro provides only partial emulation of PS/2 hardware. Interrupts that a device connected to a
physical port requests are not passed to the virtual machine. The guest operating system cannot use direct
memory access (DMA) to move data to or from the port. For this reason, not all devices that attach to a
parallel port work correctly. Do not use virtual parallel ports to connect parallel port storage devices or other
types of parallel port devices to a virtual machine.
Prerequisites
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
In the New Hardware wizard, select Parallel Port.
4
Select where the virtual parallel port sends output.
Option
Description
Use a physical parallel port
Select a parallel port on the host system.
Use output file
Send output from the virtual parallel port to a file on the host system.
Either locate an existing output file or browse to a directory and type a
filename to create a new output file.
5
To connect the virtual parallel port to the virtual machine when the virtual machine powers on, select
Connect at power on.
6
Click Finish to add the virtual parallel port to the virtual machine.
When a parallel port is configured for a virtual machine, most guest operating systems detect the port at
installation time and install the required drivers. Some operating systems, including Linux, detect the ports
at boot time.
Configure a Virtual Parallel Port on a Linux 2.6.x Kernel Host
Linux 2.6.x kernels that support parallel ports use the modprobe modulename and modprobe parport_pc
modules. Workstation Pro requires that the parallel port PC-style hardware option (CONFIG_PARPORT_PC) is
built and loaded as a kernel module.
Linux kernels in the 2.6.x series use a special arbitrator for access to the parallel port hardware. If the host
system is using the parallel port, the virtual machine cannot use it. If a virtual machine is using the parallel
port, the host and any users accessing the host are denied access to the device. You must use the Removable
Devices menu to disconnect the parallel port from the virtual machine to access the device from the host
system.
VMware, Inc.
157
Using VMware Workstation Pro
Procedure
1
To determine whether the modprobe modulename and modprobe parport_pc modules are installed and
loaded on the host system, run the lsmod command as the root user.
You can also see a list of modules in the /proc/modules file.
Note In Linux 2.6.x, loading parport_pc does not load all modules.
2
If necessary, load the parallel port modules.
For example: modprobe parport_pc && modprobe ppdev
This command inserts the modules that are required for a parallel port.
3
If the lp module is loaded, run the rmmod command as root to remove it.
For example: rmmod lp
The virtual machine cannot use the parallel port correctly if the lp module is loaded.
4
Comment out the line that refers to the lp module in the /etc/modules.conf or /etc/conf.modules file.
The name of the configuration file depends on the Linux distribution.
When the line is commented out, the configuration file no longer starts the lp module when you reboot
the host system.
5
To make sure that the proper modules for the parallel port are loaded at boot time, add the following
line to the /etc/modules.conf or /etc/conf.modules file.
alias parport_lowlevel parport_pc
Configure Permissions for a Parallel Port Device on a Linux Host
Some Linux distributions do not grant a virtual machine access to the lp and parport devices by default. If
this is the case on your Linux host system, you must add the VMware user to the group that has permission
to access those devices.
Procedure
1
On the Linux host system, use the ls command to determine the owner and group for the device.
For example: ls –la /dev/parport0
The third and fourth columns of the output show the owner and group, respectively. In most cases, the
owner of the device is root and the associated group is lp.
2
To add the user to the device group, become root and open the /etc/group file in a text editor.
3
On the line that defines the lp group, add the Workstation Pro username.
For example: lp::7:daemon,lp,workstation_username
The changes take effect the next time the user logs in to the host system.
Troubleshoot ECR Errors for Parallel Ports
A parallel port on the host system does not have an Extended Control Register (ECR).
Problem
When you power on a virtual machine after adding a parallel port, an error messages states that the parallel
port on the host system does not have an ECR.
158
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Cause
This problem can occur when the hardware supports ECR, but ECR has been disabled in the BIOS.
Solution
1
Reboot the host system.
2
Early in the boot process, press and hold down the Delete key to enter the BIOS configuration editor.
3
Find the parallel port field and enable Extended Capability Port (ECP) mode or a combination of modes
that includes ECP.
Most modern computers support ECP mode.
Add a Virtual Serial Port to a Virtual Machine
You can add up to four serial (COM) ports to a virtual machine. Virtual serial ports can output to physical
serial ports, files, or named pipes.
You might want to add a virtual serial port to a virtual machine to make devices such as modems and
printers available to the virtual machine. You can also use virtual ports to send debugging data from a
virtual machine to the host system or to another virtual machine.
Note The virtual printer feature configures a serial port to make host printers available to the guest. You
do not need to install additional drivers in the virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select Serial Port.
4
Select where the virtual serial port sends output.
5
Option
Description
Use a physical parallel port
Send output to a physical serial port on the host system.
Use output file
Send output to a file on the host system. Either locate an existing output
file or browse to a directory and type a filename to create a new output file.
Output to named pipe
Set up a direct connection between two virtual machines, or a connection
between a virtual machine and an application on the host system.
If you selected Output to named pipe, configure the named pipe.
a
(Windows host) Use the default pipe name, or type another pipe name.
The pipe name must begin with \\.\pipe\ and must be the same on both the server and the client.
For example: \\.\pipe\namedpipe
b
(Linux host) Type /tmp/socket or another UNIX socket name in the first text box.
The pipe name must be the same on both the server and the client.
VMware, Inc.
159
Using VMware Workstation Pro
c
To send debugging information to an application on the host system, select This end is the server
from the first drop-down menu and select The other end is an application from the second dropdown menu.
d
To send debugging information to another virtual machine, select This end is the server from the
first drop-down menu and The other end is a virtual machine from the second drop-down menu.
6
To connect the port to the virtual machine when the virtual machine powers on, select Connect at
power on.
7
Click Finish to add the virtual serial port to the virtual machine.
8
(Optional) On the Hardware tab, select the new serial port, select Yield CPU on poll, and click OK.
This option is useful if you are using debugging tools that communicate over a serial connection. If the
serial port in the guest operating system is being used in polled mode rather than interrupt mode, you
might notice performance issues. This option forces the virtual machine to yield processor time if the
only task it is trying to do is poll the virtual serial port.
What to do next
If you set up a connection between two virtual machines, the first virtual machine is set up as the server.
Repeat this procedure for the second virtual machine, but set it up as the client by selecting This end is the
client when you configure the named pipe.
Change the Input Speed of a Serial Connection
You can increase the speed of a serial connection over a pipe to a virtual machine.
In principle, the output speed, which is the speed at which the virtual machine sends data through the
virtual serial port, is unlimited. In practice, the output speed depends on how fast the application at the
other end of the pipe reads inbound data.
Prerequisites
n
Use the guest operating system to configure the serial port for the highest setting supported by the
application that you are running in the virtual machine.
n
Power off the virtual machine and exit Workstation Pro.
Procedure
1
In a text editor, add the following line to the virtual machine configuration (.vmx) file.
serialport_number.pipe.charTimePercent = "time"
port_number is the number of the serial port, starting from 0. The first serial port is serial0. time is a
positive integer that specifies the time taken to transmit a character, expressed as a percentage of the
default speed set for the serial port in the guest operating system. For example, a setting of 200 forces
the port to take twice as long for each character, or send data at half the default speed. A setting of 50
forces the port to take only half as long for each character, or send data at twice the default speed.
2
160
Assuming that the serial port speed is set appropriately in the guest operating system, experiment with
this setting by starting with a value of 100 and gradually decreasing it until you find the highest speed
at which the connection works reliably.
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Configuring Generic SCSI Devices
The generic SCSI feature gives the guest operating system direct access to SCSI devices that are connected to
the host system, including scanners, tape drives, and other data storage devices. A virtual machine can use
the generic SCSI driver to run any SCSI device that is supported by the guest operating system.
To use SCSI devices in a virtual machine running on a Windows host system, you must run Workstation Pro
as a user who has administrator access.
Although generic SCSI is device independent, it can be sensitive to the guest operating system, device class,
and specific SCSI hardware.
n
Add a Generic SCSI Device to a Virtual Machine on page 161
You must add a generic SCSI device to the virtual machine to map virtual SCSI devices on a virtual
machine to physical generic SCSI devices on the host system. You can add up to 60 generic SCSI
devices to a virtual machine.
n
Avoiding Concurrent Access Problems for SCSI Devices on Linux Hosts on page 162
Workstation Pro makes sure that multiple programs do not use the same /dev/sg entry at the same
time, but it cannot always ensure that multiple programs do not use the /dev/sg entry and the
traditional /dev entry at the same time.
n
Troubleshoot Problems Detecting Generic SCSI Devices on page 162
When you add a generic SCSI device to a virtual machine, the device does not appear in the list of
available SCSI devices.
Add a Generic SCSI Device to a Virtual Machine
You must add a generic SCSI device to the virtual machine to map virtual SCSI devices on a virtual machine
to physical generic SCSI devices on the host system. You can add up to 60 generic SCSI devices to a virtual
machine.
Note You cannot add a generic SCSI device to a shared or remote virtual machine.
Prerequisites
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
In the Add Hardware wizard, select Generic SCSI Device.
4
Select the physical SCSI device to map to the virtual SCSI device.
When you type the path to the SCSI device on a Linux host, do not enter /dev/st0 or /dev/sr0.
5
To connect the device when the virtual machine powers on, select Connect at power on.
6
Click Finish to add the device.
7
On the Hardware tab, select the SCSI device identifier to use for the device from the Virtual device
node drop-down menu and click OK.
For example, if you select SCSI 0:2, the guest operating system sees the drive as ID 2 on controller 0.
VMware, Inc.
161
Using VMware Workstation Pro
Avoiding Concurrent Access Problems for SCSI Devices on Linux Hosts
Workstation Pro makes sure that multiple programs do not use the same /dev/sg entry at the same time, but
it cannot always ensure that multiple programs do not use the /dev/sg entry and the traditional /dev entry
at the same time.
The SCSI generic driver sets up a mapping in /dev for each SCSI device. Each entry starts with sg, for the
SCSI generic driver, followed by a number. For example, /dev/sg0 is the first generic SCSI device. Each entry
corresponds to a SCSI device in the order specified in /proc/scsi/scsi, from the lowest device ID on the
lowest adapter to the highest device ID on the lowest adapter, and so on to the highest device ID on the
highest adapter.
Some Linux devices, such as tape drives, disk drives, and CD-ROM drives, already have a designated /dev
entry (st, sd, and sr, respectively). When the SCSI generic driver is installed, Linux identifies these devices
with corresponding sg entries in /dev, in addition to their traditional entries.
To avoid concurrent access problems, do not specify /dev/st0 or /dev/sr0 when you specify which SCSI
device to use in a virtual machine.
Important Do not attempt to use the same generic SCSI device in both the host system and guest
operating system. Unexpected behavior and data loss or corruption might occur.
Troubleshoot Problems Detecting Generic SCSI Devices
When you add a generic SCSI device to a virtual machine, the device does not appear in the list of available
SCSI devices.
Problem
The SCSI device does not appear in the list of available SCSI devices after you add it to a virtual machine.
Cause
A driver for that device is not installed on the host system, a driver on the host system prevents the device
from being detected, or the virtual machine uses a device for which there are no drivers available to the host
operating system.
Solution
1
Determine the SCSI bus number that the device uses on the host system.
The SCSI bus is assigned a number by the host operating system after all IDE buses are assigned
numbers. For example, if you have two IDE buses, they are numbered 0 and 1. The first SCSI bus is
assigned bus number 2. You can use a third-party tool, such as winobj, to determine the SCSI bus
number.
2
Determine the target ID that the device uses in the virtual machine and on the host system.
This ID is usually set by some jumpers or switches on the device.
3
Determine whether the device driver for the device is installed on the host system.
If the device driver is not installed, install it and see if the device appears. To avoid a device-in-use
conflict between the host and guest, you might not want to install the driver on the host system.
4
If an original SCSI device driver is already installed on the host system, disable it.
Some Windows operating systems do not process the send command from the adapter if the device
driver owns the device.
5
162
Power off the virtual machine and open the virtual machine configuration (.vmx) file in a text editor.
VMware, Inc.
Chapter 8 Configuring and Managing Devices
6
Add or change the following line in the virtual machine configuration (.vmx) file.
scsiZ:Y.fileName = "deviceName"
Z is the SCSI bus number the device uses in the virtual machine. For deviceName, use scsiX:Y, where X is
the SCSI bus number that the device uses on the host system and Y is the target ID that the device uses
in both the virtual machine and on the host system.
For example, if the problematic device is a CD-ROM drive, the existing entry is
scsi0:4.fileName = "CdRom0" and the device on the host system is located on bus 2 with target ID 4,
change the line to scsi0:4.fileName = "scsi2:4".
7
If the virtual machine does not contain any SCSI devices, to add a generic SCSI device to a new virtual
SCSI adapter, or to use an existing SCSI device as a generic SCSI device, add the following line to the
virtual machine configuration (.vmx) file.
scsiZ:Y.deviceType = "scsi-passthru"
8
If the virtual machine does not contain any SCSI devices, or to add a generic SCSI device to a new
virtual SCSI adapter, add the following lines to the virtual machine configuration (.vmx) file.
scsiZ:Y.present = "true"
scsiZ.present = "true"
Configuring Sixteen-Way Virtual Symmetric Multiprocessing
With virtual symmetric multiprocessing (SMP), you can assign processors and cores per processor to a
virtual machine on any host system that has at least two logical processors.
Workstation Pro considers multiprocessor hosts that have two or more physical CPUs, single-processor
hosts that have a multicore CPU, and single-processor hosts that have hyperthreading enabled, to have two
logical processors.
Note On hyperthreaded uniprocessor hosts, performance of virtual machines that have virtual SMP might
be below normal. Even on multiprocessor hosts, performance is affected if you overcommit by running
multiple workloads that require more total CPU resources than are physically available.
You can power on and run multiple dual-processor virtual machines concurrently. The number of
processors for a given virtual machine appears in the summary view of the virtual machine.
Configure Sixteen-Way Virtual Symmetric Multiprocessing
You can configure sixteen-way virtual symmetric multiprocessing (SMP) for an existing virtual machine.
Note For a new virtual machine, you can specify the number of processors when you select the custom
configuration option in the New Virtual Machine wizard.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Processors.
3
Change the Number of processors setting to 16.
4
Click OK to save your changes.
VMware, Inc.
163
Using VMware Workstation Pro
Use a Virtual Machine That Has More Than Sixteen Virtual Processors
If Workstation Pro is running on a multiprocessor host system, you can open a virtual machine that has
more than 16 virtual processors assigned to it. You must change the number of processors before powering
on the virtual machine.
You can see the number of processors in the virtual machine summary view or by viewing the virtual
machine hardware settings.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Processors.
Note that Number of processors is set to Other (x), where x is the number of processors originally
assigned to it. Workstation Pro preserves this original configuration setting for the number of
processors, even though eight is the maximum number of processors supported.
3
Change the Number of processors setting to 1, 2, 4, 8, or 16.
After you commit a change to this setting, the original setting for the number of processors is discarded
and no longer appears as an option.
4
Click OK to save your changes.
Configuring Keyboard Features
You can change key combinations for hot-key sequences in Workstation Pro and the language for the
keyboard that VNC clients use. You can also configure platform-specific keyboard features for Windows and
Linux host systems.
n
Use the Enhanced Virtual Keyboard Feature in a Virtual Machine on page 165
The enhanced virtual keyboard feature provides better handling of international keyboards and
keyboards that have extra keys. This feature is available only on Windows host systems.
n
Change Hot-Key Combinations for Common Operations on page 166
You can change the hot-key combinations that you use to perform common virtual machine
operations.
n
Change Hot-Key Combinations for Unity Mode on page 167
You can change the hot-key combination that you use to access the Start and Applications menus in
Unity mode.
n
Configure Keyboard Mapping for a Remote X Server on page 167
Although the keyboard works correctly with a local X server, it might not work correctly when you
run the same virtual machine with a remote X server.
n
Change How a Specific Key Is Mapped on page 168
If some keys on the keyboard do not work correctly in a virtual machine, you can set a property that
makes a modification to the map. To change how a specific key is mapped, you add the appropriate
property to the virtual machine configuration (.vmx) file or to ~/.vmware/config.
164
VMware, Inc.
Chapter 8 Configuring and Managing Devices
n
Configure How Keysyms Are Mapped on page 169
When key code mapping cannot be used or is disabled, Workstation Pro maps keysyms to v-scan
codes. If a language-specific keyboard does not appear to be supported by Workstation Pro, you might
need to set a property that tells Workstation Pro which keysym table to use.
n
V-Scan Code Table on page 170
You specify v-scan codes when you change how keys or keysyms are mapped.
Use the Enhanced Virtual Keyboard Feature in a Virtual Machine
The enhanced virtual keyboard feature provides better handling of international keyboards and keyboards
that have extra keys. This feature is available only on Windows host systems.
Because it processes raw keyboard input as soon as possible, the enhanced virtual keyboard feature also
offers security improvements by bypassing Windows keystroke processing and any malware that is not
already at a lower layer. When you use the enhanced virtual keyboard feature, only the guest operating
system acts when you press Ctrl+Alt+Delete.
Note You cannot configure the enhanced virtual keyboard setting for a shared or remote virtual machine.
Prerequisites
n
Power off the virtual machine.
n
If you did not install the Enhanced Keyboard Utility feature when you initially installed or upgraded
Workstation Pro, install it by running the Workstation Pro installer in program maintenance mode. See
“Install the Enhanced Keyboard Driver on a Windows Host,” on page 165.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Options tab, select General.
3
Select an option from the Enhanced virtual keyboard drop-down menu.
4
Option
Description
Off
The virtual machine does not use the enhanced virtual keyboard feature.
This is the default value.
Use if available (recommended)
The virtual machine uses the enhanced virtual keyboard feature, but only
if the enhanced virtual keyboard driver is installed on the host system.
Required
The virtual machine must use the enhanced the virtual keyboard feature. If
you select this option and the enhanced keyboard driver is not installed on
the host system, Workstation Pro returns an error message.
Click OK to save your changes.
Install the Enhanced Keyboard Driver on a Windows Host
To use the enhanced virtual keyboard feature in a virtual machine, you must install the enhanced keyboard
driver on the Windows host system. If you did not install the enhanced keyboard driver when you initially
installed or upgraded Workstation Pro, you can install it by running the Workstation Pro installer in
program maintenance mode.
Prerequisites
Verify that you have administrative privileges on the host system.
VMware, Inc.
165
Using VMware Workstation Pro
Procedure
1
Log in to the Windows host system as the Administrator user or as a user who is a member of the local
Administrators group.
If you log in to a domain, the domain account must also be a local administrator.
2
Double-click the VMware-workstation-xxxx-xxxxxxx.exe file, where xxxx-xxxxxxx is the version and
build numbers.
3
Select Modify/Change.
4
Select Enhanced Keyboard Utility.
5
Follow the prompts to finish the installation.
What to do next
Enable the enhanced virtual keyboard feature for the virtual machine. See “Use the Enhanced Virtual
Keyboard Feature in a Virtual Machine,” on page 165.
Change Hot-Key Combinations for Common Operations
You can change the hot-key combinations that you use to perform common virtual machine operations.
Configuring hot keys is useful to prevent key combinations such as Ctrl+Alt+Del from being intercepted by
Workstation Pro instead of being sent to the guest operating system. You can use hot-key sequences to
switch between virtual machines, enter or exit from full screen mode, release input, send Ctrl+Alt+Del only
to virtual machines, and send commands only to virtual machines.
Prerequisites
Familiarize yourself with the default hot-key combinations. See “Default Hot-Key Combinations,” on
page 38.
Procedure
1
Select Edit > Preferences > Hot Keys.
2
To change the hot-key combinations for common virtual machine operations, click one or more hot key
buttons on the dialog box.
For example, to use Ctrl+Shift to release control from the current virtual machine, click the Ctrl and
Shift buttons.
The text under the hot key buttons describes the new hot key combinations.
3
Click OK to save your changes.
Use Ctrl+Alt in a Key Combination
Because Ctrl+Alt tells Workstation Pro to release mouse and keyboard input, hot-key combinations that
include Ctrl+Alt are not passed to the guest operating system. You must use the Space key if the key
combination includes Ctrl+Alt.
Procedure
166
1
Press Ctrl+Alt+spacebar.
2
Release the spacebar without releasing Ctrl and Alt.
3
Press the third key of the key combination to send to the guest operating system.
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Change Hot-Key Combinations for Unity Mode
You can change the hot-key combination that you use to access the Start and Applications menus in Unity
mode.
Procedure
1
Select Edit > Preferences > Unity.
2
Type a new hot-key combination in the Hot Key text box.
3
To minimize the Workstation Pro when you enter Unity mode, select Minimize Workstation when
entering Unity.
Do not select this setting if you plan to run virtual machines in Unity mode and simultaneously run
other virtual machines that are accessible only in the Workstation Pro window.
4
Click OK to save your changes.
Configure Keyboard Mapping for a Remote X Server
Although the keyboard works correctly with a local X server, it might not work correctly when you run the
same virtual machine with a remote X server.
For local X servers, Workstation Pro maps X key codes to PC scan codes to correctly identify a key. Because
it cannot tell whether a remote X server is running on a PC or on some other kind of computer,
Workstation Pro uses this key code map only for local X servers. You can set a property to tell
Workstation Pro to use key code mapping. See “Understanding X-Key Codes and Keysyms,” on page 168
for more information.
To configure a keyboard mapping for a remote X server, you add the appropriate property to the virtual
machine configuration (.vmx) file or to ~/.vmware/config.
Prerequisites
n
Verify that the remote X server is an XFree86 server running on a PC.
n
Power off the virtual machine and exit Workstation Pro.
Note If the keyboard does not work correctly on an XFree86 server running locally, report the problem to
VMware technical support.
Procedure
n
If you use an XFree86-based server that Workstation Pro does not recognize as an XFree86 server, add
the xkeymap.usekeycodeMap property and set it to TRUE.
This property tells Workstation Pro to always use key code mapping regardless of server type.
For example: xkeymap.usekeycodeMap = "TRUE"
n
If Workstation Pro does not recognize the remote server as an XFree86 server, add the
xkeymap.usekeycodeMapIfXFree86 property and set it to TRUE.
This property tells Workstation Pro to use key code mapping if you are using an XFree86 server, even if
it is remote.
For example: usekeycodeMapIfXFree86 = "TRUE"
VMware, Inc.
167
Using VMware Workstation Pro
Understanding X-Key Codes and Keysyms
Pressing a key on a PC keyboard generates a PC scan code based roughly on the position of the key. For
example, the Z key on a German keyboard generates the same code as the Y key on an English keyboard
because they are in the same position on the keyboard. Most keys have one-byte scan codes, but some keys
have two-byte scan codes with prefix 0xe0.
Internally, Workstation Pro uses a simplified version of the PC scan code that is a single nine-bit numeric
value, called a v-scan code. A v-scan code is written as a three-digit hexadecimal number. The first digit is 0
or 1. For example, the Ctrl key on the left side of the keyboard has a one-byte scan code (0x1d) and its v-scan
code is 0x01d. The Ctrl key scan code on the right side of the keyboard is two bytes (0xe0, 0x1d) and its vscan code is 0x11d.
An XFree86 server on a PC has a one-to-one mapping from X key codes to PC scan codes, or v-scan codes,
which is what Workstation Pro uses. When Workstation Pro is hosted on an XFree86 server and runs a local
virtual machine, it uses the built-in mapping from X key codes to v-scan codes. This mapping is keyboard
independent and should be correct for most languages. In other cases (not an XFree86 server or not a local
server), Workstation Pro must map keysyms to v-scan codes by using a set of keyboard-specific tables.
An X server uses a two-level encoding of keys, which includes the X key code and the keysym. An X key
code is a one-byte value. The assignment of key codes to keys depends on the X server implementation and
the physical keyboard. As a result, an X application normally cannot use key codes directly. Instead, the key
codes are mapped into keysyms that have names like space, escape, x and 2. You can use an X application to
control the mapping by using the function XChangeKeyboardMapping() or by the program xmodmap. To
explore keyboard mappings, you can use the xev command, which shows the key codes and keysyms for
keys typed into its window.
A key code corresponds roughly to a physical key, while a keysym corresponds to the symbol on the key
top. For example, with an XFree86 server running on a PC, the Z key on the German keyboard has the same
key code as the Y key on an English keyboard. The German Z keysym, however, is the same as the English Z
keysym, and different from the English Y keysym.
Change How a Specific Key Is Mapped
If some keys on the keyboard do not work correctly in a virtual machine, you can set a property that makes
a modification to the map. To change how a specific key is mapped, you add the appropriate property to the
virtual machine configuration (.vmx) file or to ~/.vmware/config.
Prerequisites
n
Verify that the X server is an XFree86 server running on a PC. If the X server is remote, configure it to
use key code mapping. See “Configure Keyboard Mapping for a Remote X Server,” on page 167.
n
Determine the X key code and the corresponding v-scan code for the key. To find the X key code for a
key, run xev or xmodmap -pk. See “V-Scan Code Table,” on page 170 for most v-scan codes.
n
Power off the virtual machine and exit Workstation Pro.
Procedure
1
Open .vmx or ~/.vmware/config in a text editor.
2
Add the xkeymap.keycode.code property and set it to the v-scan code.
code must be a decimal number and the v-scan code must be a C-syntax hexadecimal number, such as
0x001.
In this example, the properties swap left Ctrl and Caps Lock.
xkeymap.keycode.64 = "0x01d # X Caps_Lock -> VM left ctrl"
xkeymap.keycode.37 = "0x03a # X Control_L -> VM caps lock"
168
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Configure How Keysyms Are Mapped
When key code mapping cannot be used or is disabled, Workstation Pro maps keysyms to v-scan codes. If a
language-specific keyboard does not appear to be supported by Workstation Pro, you might need to set a
property that tells Workstation Pro which keysym table to use.
Workstation Pro determines which table to use by examining the current X keymap. However, its decisionmaking process can sometimes fail. In addition, each mapping is fixed and might not be completely correct
for any given keyboard and X key code-to-keysym mapping. For example, if a user uses xmodmap to swap
Ctrl and Caps Lock by, the keys are swapped in the virtual machine when using a remote server (keysym
mapping), but are unswapped when using a local server (key code mapping). To correct this situation, you
must remap the keys in Workstation Pro.
To configure how keysyms are mapped, you add one or more properties to the virtual machine
configuration (.vmx) file or to ~/.vmware/config.
Prerequisites
n
To change the mapping of a few keys, determine the keysym name for each key. To find a keysym
name, use the xev or xmodmap -pk command. The X header file /usr/include/X11/keysymdef.h also has a
complete list of keysyms. The name of a keysym is the same as its C constant, but without the XK_
prefix.
n
To use a different keysym table, determine which mapping table to use. The tables are located in the
xkeymap directory in the Workstation Pro installation directory, which is usually /usr/lib/vmware. The
table you must use depends on the keyboard layout. The normal distribution includes tables for PC
keyboards for the United States and a number of European countries and languages. For most of these,
both the 101-key (or 102-key) and the 104-key (or 105-key) variants are available.
If none of the mapping tables is completely correct, find one that works best, copy it to a new location,
and change the individual keysym mappings.
n
Familiarize yourself with the v-scan codes. See “V-Scan Code Table,” on page 170.
n
Power off the virtual machine and exit Workstation Pro.
Procedure
n
To disable X key code mapping to map keysyms rather than key codes to v-scan codes, add the
xkeymap.nokeycodeMap property and set it to TRUE.
For example: xkeymap.nokeycodeMap = "TRUE"
n
If Workstation Pro has a table in the xkeymap directory for your keyboard but cannot detect it, add the
xkeymap.language property and set it to one of the tables in the xkeymap directory.
For example: xkeymap.language = "keyboard_type"
If the failure to detect the keyboard means that the table is not completely correct for you, you might
need to create a modified table and use the xkeymap.fileName property instead.
n
To use a different keysym mapping table that is not in the xkeymap directory, add the xkeymap.fileName
property and set it to the path to the table.
For example: xkeymap.fileName = "file_path"
The table must list a keysym for each key by using the form sym="v-scan_code", where the sym value is
an X keysym name and v-scan_code is a C-syntax hexadecimal number, for example, 0x001. Use a new
line for each keysym.
Note Because compiling a complete keysym mapping is difficult, you should usually edit an existing
table and make small changes.
VMware, Inc.
169
Using VMware Workstation Pro
n
To change the keysym mapping of a few keys, type the xkeymap.keysym property for each key, on
separate lines.
For example: xkeymap.keysym.sym = "v-scan_code"
The value of sym must be an X keysym name and v-scan_code is a C-syntax hexadecimal number, for
example, 0x001.
V-Scan Code Table
You specify v-scan codes when you change how keys or keysyms are mapped.
Following are the v-scan codes for the 104-key U.S. keyboard.
Table 8‑1. V-Scan Codes for the 104-Key U.S. Keyboard
Symbol
Shifted Symbol
Location
Esc
0x001
1
!
0x002
2
@
0x003
3
#
0x004
4
$
0x005
5
%
0x006
6
^
0x007
7
&
0x008
8
*
0x009
9
(
0x00a
0
)
0x00b
-
_
0x00c
=
+
0x00d
Backspace
0x00e
Tab
0x00f
Q
0x010
W
0x011
E
0x012
R
0x013
T
0x014
Y
0x015
U
0x016
I
0x017
O
0x018
P
0x019
[
{
0x01a
]
}
0x01b
Enter
Ctrl
A
170
V-Scan Code
0x01c
left
0x01d
0x01e
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Table 8‑1. V-Scan Codes for the 104-Key U.S. Keyboard (Continued)
Symbol
Shifted Symbol
Location
V-Scan Code
S
0x01f
D
0x020
F
0x021
G
0x022
H
0x023
J
0x024
K
0x025
L
0x026
;
0x027
'
0x028
`
0x029
Shift
\
left
|
0x02a
0x02b
Z
0x02c
X
0x02d
C
0x02e
V
0x02f
B
0x030
N
0x031
M
0x032
,
<
0x033
.
>
0x034
/
?
0x035
Shift
right
0x036
*
numeric pad
0x037
Alt
left
0x038
Space bar
0x039
Caps Lock
0x03a
F1
0x03b
F2
0x03c
F3
0x03d
F4
0x03e
F5
0x03f
F6
0x040
F7
0x041
F8
0x042
F9
0x043
F10
0x044
Num Lock
VMware, Inc.
numeric pad
0x045
171
Using VMware Workstation Pro
Table 8‑1. V-Scan Codes for the 104-Key U.S. Keyboard (Continued)
Symbol
Shifted Symbol
Location
Scroll Lock
V-Scan Code
0x046
Home
7
numeric pad
0x047
Up arrow
8
numeric pad
0x048
PgUp
9
numeric pad
0x049
numeric pad
0x04a
numeric pad
0x04b
numeric pad
0x04c
numeric pad
0x04d
numeric pad
0x04e
Left arrow
4
5
Right arrow
6
+
End
1
numeric pad
0x04f
Down arrow
2
numeric pad
0x050
PgDn
3
numeric pad
0x051
Ins
0
numeric pad
0x052
numeric pad
0x053
Del
F11
0x057
F12
0x058
Break
Pause
0x100
Enter
numeric pad
0x11c
Ctrl
right
0x11d
/
numeric pad
0x135
SysRq
Print Scrn
0x137
Alt
right
0x138
Home
function pad
0x147
Up arrow
function pad
0x148
Page Up
function pad
0x149
Left arrow
function pad
0x14b
Right arrow
function pad
0x14d
End
function pad
0x14f
Down arrow
function pad
0x150
Page Down
function pad
0x151
Insert
function pad
0x152
Delete
function pad
0x153
Windows
left
0x15b
Windows
right
0x15c
Menu
0x15d
The 84-key keyboard has a Sys Req key on the numeric pad. Its v-scan code is 0x054.
Keyboards outside the U.S. usually have an extra key (often < > or < > |) next to the left Shift key. The v-scan
code for this key is 0x056.
172
VMware, Inc.
Chapter 8 Configuring and Managing Devices
Modify Hardware Settings for a Virtual Machine
You can modify memory, processor, virtual and physical hard disk, CD-ROM and DVD drive, floppy drive,
virtual network adapter, USB controller, sound card, serial port, generic SCSI device, printer, and display
settings for a virtual machine.
Procedure
1
Select the virtual machine, select VM > Settings.
2
Click the Hardware tab.
3
Select the hardware setting to modify.
4
Click Help for information about how to modify the hardware setting.
You must power off a virtual machine before you change certain hardware settings.
VMware, Inc.
173
Using VMware Workstation Pro
174
VMware, Inc.
Configuring Network Connections
9
Workstation Pro provides bridged networking, network address translation (NAT), host-only networking,
and custom networking options to configure a virtual machine for virtual networking. The software needed
for all networking configurations is installed on the host system when you install Workstation Pro.
This chapter includes the following topics:
n
“Understanding Virtual Networking Components,” on page 175
n
“Understanding Common Networking Configurations,” on page 176
n
“Changing the Default Networking Configuration,” on page 177
n
“Configuring Bridged Networking,” on page 181
n
“Configuring Network Address Translation,” on page 184
n
“Configuring Host-Only Networking,” on page 193
n
“Assigning IP Addresses in Host-Only Networks and NAT Configurations,” on page 199
n
“Configuring LAN Segments,” on page 203
n
“Configuring Samba for Workstation Pro,” on page 204
n
“Using Virtual Network Adapters in Promiscuous Mode on Linux Hosts,” on page 205
n
“Maintaining and Changing MAC Addresses for Virtual Machines,” on page 206
n
“Sample Custom Networking Configuration,” on page 207
Understanding Virtual Networking Components
The virtual networking components in Workstation Pro include virtual switches, virtual network adapters,
the virtual DHCP server, and the NAT device.
Virtual Switches
Like a physical switch, a virtual switch connects networking components together. Virtual switches, which
are also referred to as virtual networks, are named VMnet0, VMnet1, VMnet2, and so on. A few virtual
switches are mapped to specific networks by default.
VMware, Inc.
175
Using VMware Workstation Pro
Table 9‑1. Default Virtual Network Switches
Network Type
Switch Name
Bridged
VMnet0
NAT
VMnet8
Host-only
VMnet1
Workstation Pro creates virtual switches as needed, up to 20 virtual switches on a Windows host system and
up to 255 virtual switches on a Linux host system. You can connect an unlimited number of virtual network
devices to a virtual switch on a Windows host system and up to 32 virtual network devices to a virtual
switch on a Linux host system.
Note On Linux host systems, the virtual switch names are in all lowercase letters, for example, vmnet0.
Virtual Network Adapters
When you use the New Virtual Machine wizard to create a new virtual machine, the wizard creates a virtual
network adapter for the virtual machine. The virtual network adapter appears in the guest operating system
as an AMD PCNET PCI adapter or Intel Pro/1000 MT Server Adapter. In Windows Vista, Windows 7, and
Windows 8 guest operating systems, it is an Intel Pro/1000 MT Server Adapter.
Workstation 6.0 and later virtual machines can have up to 10 virtual network adapters. Workstation 5.x
virtual machines are limited to three virtual network adapters.
Virtual DHCP Server
The virtual Dynamic Host Configuration Protocol (DHCP) server provides IP addresses to virtual machines
in configurations that are not bridged to an external network. For example, the virtual DHCP server assigns
IP addresses to virtual machines in host-only and NAT configurations.
NAT Device
In a NAT configuration, the NAT device passes network data between one or more virtual machines and the
external network, identifies incoming data packets intended for each virtual machine, and sends them to the
correct destination.
Understanding Common Networking Configurations
You can configure bridged networking, NAT, and host-only networking for virtual machines. You can also
use the virtual networking components to create sophisticated custom virtual networks.
Bridged Networking
Bridged networking connects a virtual machine to a network by using the network adapter on the host
system. If the host system is on a network, bridged networking is often the easiest way to give the virtual
machine access to that network.
When you install Workstation Pro on a Windows or Linux host system, a bridged network (VMnet0) is set
up for you. See “Configuring Bridged Networking,” on page 181.
NAT Networking
With NAT, a virtual machine does not have its own IP address on the external network. Instead, a separate
private network is set up on the host system. In the default configuration, a virtual machine gets an address
on this private network from the virtual DHCP server. The virtual machine and the host system share a
single network identity that is not visible on the external network.
176
VMware, Inc.
Chapter 9 Configuring Network Connections
When you install Workstation Pro on a Windows or Linux host system, a NAT network (VMnet8) is set up
for you. When you use the New Virtual Machine wizard to create a new virtual machine and select the
typical configuration type, the wizard configures the virtual machine to use the default NAT network.
You can have only one NAT network. See “Configuring Network Address Translation,” on page 184.
Host-Only Networking
Host-only networking creates a network that is completely contained within the host computer. Host-only
networking provides a network connection between the virtual machine and the host system by using a
virtual network adapter that is visible on the host operating system.
When you install Workstation Pro on a Windows or Linux host system, a host-only network (VMnet1) is set
up for you. See “Configuring Host-Only Networking,” on page 193.
Custom Networking Configurations
With the Workstation Pro virtual networking components, you can create sophisticated virtual networks.
The virtual networks can be connected to one or more external networks, or they can run entirely on the
host system. You can use the virtual network editor to configure multiple network cards in the host system
and create multiple virtual networks. “Sample Custom Networking Configuration,” on page 207.
Changing the Default Networking Configuration
When you choose the standard network options in the New Virtual Machine wizard, the wizard sets up the
networking configuration for the virtual machine.
In a typical configuration, the New Virtual Machine wizard sets up NAT for the virtual machine. You must
select the custom configuration option to configure bridged networking or host-only networking. The
wizard connects the virtual machine to the appropriate virtual network.
You can change the networking configuration for a virtual machine by modifying virtual machine settings.
For example, you can use virtual machine settings to add virtual network adapters and change existing
virtual network adapters for a particular virtual machine.
You use the virtual network editor to change key networking settings, add and remove virtual networks,
and create custom virtual networking configurations. The changes you make in the virtual network editor
affect all virtual machines running on the host system.
Important If you click Restore Default in the virtual network editor to restore network settings, all
changes that you made to network settings after you installed Workstation Pro are permanently lost. Do not
restore the default network settings when a virtual machine is powered on as this might cause serious
damage to bridged networking.
n
Add a Virtual Network Adapter to a Virtual Machine on page 178
You can add up to 10 virtual network adapters to a virtual machine.
n
Modify an Existing Virtual Network Adapter for a Virtual Machine on page 178
You can change the settings of a virtual network adapter that is currently used by a virtual machine.
n
Disconnect a Host Virtual Network Adapter on page 179
When you install Workstation Pro, two virtual network adapters, VMware Network Adapter VMnet1
and VMware Network Adapter VMnet8, are added to the configuration of the host operating system.
You might want to disconnect one or both of these virtual network adapters to improve performance
on the host system.
n
Configure Bandwidth and Packet Loss Settings for a Virtual Machine on page 180
You can use advanced virtual network adapter settings to limit the bandwidth and specify the
acceptable packet loss percentage for incoming and outgoing data transfers for a virtual machine.
VMware, Inc.
177
Using VMware Workstation Pro
Add a Virtual Network Adapter to a Virtual Machine
You can add up to 10 virtual network adapters to a virtual machine.
Note Workstation 5.x virtual machines are limited to three virtual network adapters.
Prerequisites
Familiarize yourself with the network configuration types. See “Understanding Common Networking
Configurations,” on page 176.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, click Add.
3
Select Network Adapter and click Next.
4
Select the virtual network adapter type.
You cannot select a custom network or LAN segment for a shared virtual machine. For a remote virtual
machine, you must select a custom network.
Option
Description
Bridged
The virtual machine is connected to the network by using the network
adapter on the host system. The virtual machine has a unique identity on
the network, separate from and unrelated to the host system.
NAT
The virtual machine and the host system share a single network identity
that is not visible on the external network. When the virtual machine sends
a request to access a network resource, it appears to the network resource
as if the request is coming from the host system.
Host-only
The virtual machine and the host virtual network adapter are connected to
a private Ethernet network. The network is completely contained within
the host system.
Custom
Select a custom network from the drop-down menu. Although VMnet0,
VMnet1, and VMnet8 might be available in the list, these networks are
usually used for bridged, host-only, and NAT networks.
5
(Optional) Select the Connect at power on checkbox.
6
Click Finish to add the virtual network adapter to the virtual machine.
7
Click OK to save your changes.
8
Verify that the guest operating system is configured to use an appropriate IP address on the new
network.
a
If the virtual machine is using DHCP, release and renew the lease.
b
If the IP address is set statically, verify that the guest operating system has an address on the
correct virtual network.
Modify an Existing Virtual Network Adapter for a Virtual Machine
You can change the settings of a virtual network adapter that is currently used by a virtual machine.
Prerequisites
Familiarize yourself with the network configuration types. See “Understanding Common Networking
Configurations,” on page 176.
178
VMware, Inc.
Chapter 9 Configuring Network Connections
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select the virtual network adapter.
3
Select the virtual network adapter type.
You cannot select a custom network or LAN segment for a shared virtual machine. For a remote virtual
machine, you must select a custom network.
Option
Description
Bridged
The virtual machine is connected to the network by using the network
adapter on the host system. The virtual machine has a unique identity on
the network, separate from and unrelated to the host system.
NAT
The virtual machine and the host system share a single network identity
that is not visible on the external network. When the virtual machine sends
a request to access a network resource, it appears to the network resource
as if the request is coming from the host system.
Host-only
The virtual machine and the host virtual network adapter are connected to
a private Ethernet network. The network is completely contained within
the host system.
Custom
Select a custom network from the drop-down menu. Although VMnet0,
VMnet1, and VMnet8 might be available in this list, these networks are
usually used for bridged, host-only, and NAT networks.
LAN segment
Select a LAN segment from the drop-down menu. A LAN segment is a
private network that is shared by other virtual machines.
4
Click OK to save your changes.
5
Verify that the guest operating system is configured to use an appropriate IP address on the new
network.
a
If the virtual machine is using DHCP, release and renew the lease.
b
If the IP address is set statically, verify that the guest operating system has an address on the
correct virtual network.
Disconnect a Host Virtual Network Adapter
When you install Workstation Pro, two virtual network adapters, VMware Network Adapter VMnet1 and
VMware Network Adapter VMnet8, are added to the configuration of the host operating system. You might
want to disconnect one or both of these virtual network adapters to improve performance on the host
system.
Because broadcast packets must go to these adapters, the presence of virtual network adapters has a slight
performance cost. On Windows networks, browsing the network might be slower than usual. In some cases,
these adapters interact with the host computer networking configuration in undesirable ways.
You can reconnect a host virtual network adapter after you disconnect it.
Prerequisites
n
Determine whether you are going to use the host virtual network adapter. The host system uses
VMware Network Adapter VMnet1 to connect to the host-only network and it uses VMware Network
Adapter VMnet8 to connect to the NAT network.
n
On a Windows host, log in as an Administrator user. Only an Administrator user can change network
settings in the virtual network editor.
n
On a Linux host, log in as root. You must enter the root password to use the virtual network editor.
VMware, Inc.
179
Using VMware Workstation Pro
Procedure
1
Start the virtual network editor on the host system.
Option
Description
Windows host
Select Edit > Virtual Network Editor.
Linux host
Select Applications > System Tools > Virtual Network Editor. The menu
path might be different for your version of Linux. You can also start the
network editor from the command line by using the vmware-netcfg
command.
2
Select the virtual network.
3
Deselect Connect a host virtual adapter to this network to disconnect the host virtual network adapter
from the virtual network.
4
Click OK to save your changes.
Configure Bandwidth and Packet Loss Settings for a Virtual Machine
You can use advanced virtual network adapter settings to limit the bandwidth and specify the acceptable
packet loss percentage for incoming and outgoing data transfers for a virtual machine.
Note You cannot configure advanced virtual network adapter settings for a shared or remote virtual
machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select the virtual network adapter and click Advanced.
3
Select a bandwidth setting.
4
Option
Description
Limit incoming or outgoing data
transfers to the data transfer rate
for a specific network connection
type
Select the network connection type from the Bandwidth drop-down menu.
The value in the Kbps text box changes to the data transfer rate, in kilobits
per second, of the network connection type that you select. For example, if
you select Leased Line T1 (1.544 Mbps), the value in the Kbps text box
changes to 1544.
Limit incoming or outgoing data
transfers to a specific data transfer
rate
Select Custom and type the data transfer rate, in kilobits per second, in the
Kbps text box.
Type the acceptable packet loss percentage for incoming and outgoing data transfers in the Packet Loss
(%) text box.
The default setting is 0.0%.
5
180
Click OK to save your changes.
VMware, Inc.
Chapter 9 Configuring Network Connections
Configuring Bridged Networking
When you install Workstation Pro on a Windows or Linux host system, a bridged network (VMnet0) is set
up for you. Bridged networking connects a virtual machine to a network by using the network adapter on
the host system. If the host system is on a network, bridged networking is often the easiest way to give the
virtual machine access to that network.
With bridged networking, the virtual network adapter in the virtual machine connects to a physical network
adapter in the host system. The host network adapter enables the virtual machine to connect to the LAN that
the host system uses. Bridged networking works with both wired and wireless host network adapters.
Bridged networking configures the virtual machine as a unique identity on the network, separate from and
unrelated to the host system. The virtual machine is a full participant in the network. It has access to other
machines on the network, and other machines on the network can contact it as if it were a physical computer
on the network.
Figure 9‑1. Bridged Networking Configuration
virtual
network
adapter
virtual machine
virtual network switch
(VMnet0)
virtual bridge
host
network
adapter
You can view and change the settings for bridged networking on the host system, determine which network
adapters to use for bridged networking, and map specific host network adapters to specific virtual switches.
n
Assigning IP Addresses in a Bridged Networking Environment on page 182
A virtual machine must have its own identity on a bridged network. For example, on a TCP/IP
network, the virtual machine needs its own IP address. Your network administrator can tell you
whether IP addresses are available for virtual machines and which networking settings to use in the
guest operating system.
n
Add a Bridged Network on page 182
When you install Workstation Pro on a Windows or Linux host system, a bridged network (VMnet0) is
set up for you. If you install Workstation Pro on a host system that has multiple network adapters, you
can configure multiple bridged networks.
n
Configure Bridged Networking for an Existing Virtual Machine on page 182
You can configure bridged networking for an existing virtual machine.
n
Change VMnet0 Bridged Networking Settings on page 183
By default, VMnet0 is set to use auto-bridging mode and is configured to bridge to all active network
adapters on the host system. You can use the virtual network editor to change VMnet0 to bridge to one
specific host network adapter, or restrict the host network adapters that VMnet0 auto-bridges to. The
changes you make affect all virtual machines that use bridged networking on the host system.
VMware, Inc.
181
Using VMware Workstation Pro
Assigning IP Addresses in a Bridged Networking Environment
A virtual machine must have its own identity on a bridged network. For example, on a TCP/IP network, the
virtual machine needs its own IP address. Your network administrator can tell you whether IP addresses are
available for virtual machines and which networking settings to use in the guest operating system.
Typically, the guest operating system can acquire an IP address and other network details from a DHCP
server, but you might need to set the IP address and other details manually in the guest operating system.
Users who boot multiple operating systems often assign the same address to all systems because they
assume that only one operating system will be running at a time. If the host system is set up to boot multiple
operating systems, and you run one or more operating systems in virtual machines, you must configure
each operating system to have a unique network address.
Add a Bridged Network
When you install Workstation Pro on a Windows or Linux host system, a bridged network (VMnet0) is set
up for you. If you install Workstation Pro on a host system that has multiple network adapters, you can
configure multiple bridged networks.
For example, if the host system has two network adapters connected to two different networks, you might
want virtual machines on the host system to bridge to both network adapters so that they can access either
or both physical networks.
Prerequisites
n
Verify that a network adapter is available on the host system to bridge to. If VMnet0 is bridging to all of
the available host network adapters (the default setting), you can modify it to make an adapter
available. See “Change VMnet0 Bridged Networking Settings,” on page 183.
n
On a Windows host, log in as an Administrator user. Only an Administrator user can change network
settings in the virtual network editor.
n
On a Linux host, log in as root. You must enter the root password to access the virtual network editor.
Procedure
1
Select Edit > Virtual Network Editor.
2
Click Add Network and select a network to add.
You can create a custom bridged network on VMnet2 to VMnet7. On Windows hosts, you can also use
VMnet9. On Linux hosts, you can also use vmnet10 through vmnet255.
3
Select the new network and select Bridged (connect VMs directly to the external network).
4
Select a host network adapter to bridge to from the Bridged to drop-down menu.
5
Click OK to save your changes.
Configure Bridged Networking for an Existing Virtual Machine
You can configure bridged networking for an existing virtual machine.
To configure bridged networking for a new virtual machine, select Customize Hardware when you run the
New Virtual Machine wizard.
Procedure
182
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Network Adapter.
VMware, Inc.
Chapter 9 Configuring Network Connections
3
Select Bridged: Connected directly to the physical network.
4
If you use the virtual machine on a laptop or other mobile device, select Replicate physical network
connection state.
This setting causes the IP address to be renewed when you move from one wired or wireless network to
another.
5
Click OK to save your changes.
Change VMnet0 Bridged Networking Settings
By default, VMnet0 is set to use auto-bridging mode and is configured to bridge to all active network
adapters on the host system. You can use the virtual network editor to change VMnet0 to bridge to one
specific host network adapter, or restrict the host network adapters that VMnet0 auto-bridges to. The
changes you make affect all virtual machines that use bridged networking on the host system.
For example, you might want to change VMnet0 to bridge to a specific host network adapter, or to autobridge to as subset of the available host network adapters, to make a host network adapter available to
create a second bridged network.
Important If you reassign a host network adapter to a different virtual network, any virtual machine that
is using the original network loses its network connectivity through that network and you must change the
setting for each affected virtual machine network adapter individually. This restriction can be especially
problematic if the host system has only one physical network adapter and you reassign it to a virtual
network other than VMnet0. Even though the virtual network appears to be bridged to an automatically
chosen adapter, the only adapter it can use was assigned to a different virtual network.
Prerequisites
n
On a Windows host, log in as an Administrator user. Only an Administrator user can change network
settings in the virtual network editor.
n
On a Linux host, log in as root. You must enter the root password to use the virtual network editor.
Procedure
1
Select Edit > Virtual Network Editor.
2
Select VMnet0.
3
Change the host network adapters that VMnet0 bridges to.
4
VMware, Inc.
Option
Description
Prevent VMnet0 from automatically
bridging to a particular host
network adapter
a
b
c
Disable automatic bridging and
bridge VMnet0 to a specific host
network adapter
Select the host network adapter from the Bridge to drop-down menu.
Click Automatic Settings.
Deselect the check box for the host network adapter.
Click OK.
Click OK to save your changes.
183
Using VMware Workstation Pro
Configuring Network Address Translation
When you install Workstation Pro on a Windows or Linux host system, a NAT network (VMnet8) is set up
for you. When you use the New Virtual Machine wizard to create a typical virtual machine, the wizard
configures the virtual machine to use the default NAT network.
With NAT, a virtual machine does not have its own IP address on the external network. Instead, a separate
private network is set up on the host system. In the default configuration, virtual machines get an address
on this private network from the virtual DHCP server.
Figure 9‑2. NAT Configuration
virtual
network
adapter
virtual network switch
(VMnet8)
virtual machine
NAT
device
DHCP server
network
The virtual machine and the host system share a single network identity that is not visible on the external
network. NAT works by translating the IP addresses of virtual machines in the private network to the IP
address of the host system. When a virtual machine sends a request to access a network resource, it appears
to the network resource as if the request is coming from the host system.
The host system has a virtual network adapter on the NAT network. This adapter enables the host system
and virtual machines to communicate with each other. The NAT device passes network data between one or
more virtual machines and the external network, identifies incoming data packets intended for each virtual
machine, and sends them to the correct destination.
n
Features and Limitations of NAT Configurations on page 185
NAT is useful when the number of IP addresses is limited or the host system is connected to the
network through a non-Ethernet adapter.
n
Change NAT Settings on page 186
You can change the gateway IP address, configure port forwarding, and configure advanced
networking settings for NAT networks.
n
Editing the NAT Configuration File on page 188
If you are an advanced user, you can edit the NAT configuration file to modify NAT settings.
n
Using NAT with NetLogon on page 191
If you use NAT networking in a Windows virtual machine running on a Windows host system, you
can use NetLogon to log in to a Windows domain from the virtual machine and access file shares that
the WINS server knows.
n
Specifying Connections from Source Ports Below 1024 on page 192
If a virtual machine that uses NAT attempts to connect to a server that requires the client to use a
source port below 1024, the NAT device must forward the request from a port below 1024. For security
reasons, some servers accept connections only from source ports below 1024.
184
VMware, Inc.
Chapter 9 Configuring Network Connections
Features and Limitations of NAT Configurations
NAT is useful when the number of IP addresses is limited or the host system is connected to the network
through a non-Ethernet adapter.
With NAT, a virtual machine can use many standard TCP/IP protocols to connect to other machines on the
external network. For example, you can use HTTP to browse Web sites, FTP to transfer files, and Telnet to
log in to other computers. You also can connect to a TCP/IP network by using a Token Ring adapter on the
host system. NAT works with Ethernet, DSL, and phone modems.
In the default NAT configuration, computers on the external network cannot initiate connections to the
virtual machine. For example, you cannot use the virtual machine as a Web server to send Web pages to
computers on the external network. This feature protects the guest operating system from being
compromised before you have a chance to install security software.
NAT configurations have the following additional features and limitations.
n
NAT causes some performance loss. Because NAT requires that every packet sent to and received from
a virtual machine must be in the NAT network, an unavoidable performance penalty occurs.
n
NAT is not perfectly transparent. NAT does not usually allow connections to be initiated from outside
the network, although you can manually configure the NAT device to set up server connections. The
practical result is that some TCP and UDP protocols that require a connection be initiated from the
server machine do not work automatically and some might not work at all.
n
NAT provides some firewall protection. A standard NAT configuration provides basic-level firewall
protection because the NAT device can initiate connections from the private NAT network, but devices
on the external network usually cannot initiate connections to the private NAT network.
Understanding DHCP in a NAT Configuration
In a NAT configuration, virtual machines running on the network with the NAT device can send DHCP
requests to dynamically obtain their IP addresses.
In the default configuration, the virtual DHCP server dynamically allocates IP addresses in the range of net.
128 through net.254, where net is the network number assigned to the NAT network. Workstation Pro always
uses a Class C address for NAT networks. IP addresses net.3 through net.127 can be used for static IP
addresses. IP address net.1 is reserved for the host virtual network adapter and net.2 is reserved for the NAT
device.
In addition to the IP address, the virtual DHCP server on the NAT network sends out configuration
information that enables the virtual machine to operate. This information includes the default gateway and
the DNS server. In the DHCP response, the NAT device instructs the virtual machine to use the IP address
net.2 as the default gateway and DNS server. This routing causes all IP packets destined for the external
network and DNS requests to be forwarded to the NAT device.
Understanding the NAT Device
The NAT device is connected to the VMnet8 virtual switch. Virtual machines connected to the NAT network
also use the VMnet8 virtual switch.
The NAT device waits for packets coming from virtual machines on the VMnet8 virtual network. When a
packet arrives, the NAT device translates the address of the virtual machine to the address of the host
system before forwarding the packet to the external network.
When data arrives from the external network for the virtual machine on the private network, the NAT
device receives the data, replaces the network address with the address of the virtual machine, and forwards
the data to the virtual machine on the virtual network. This translation occurs automatically and requires
minimal configuration on the guest operating system and the host system.
VMware, Inc.
185
Using VMware Workstation Pro
The NAT device is a DNS proxy and forwards DNS requests from the virtual machines to a DNS server that
the host system knows. Responses return to the NAT device, which then forwards them to the virtual
machines.
If they get their configuration information from the virtual DHCP server, the virtual machines on the NAT
network use the NAT device as the DNS server. The virtual machines in the private NAT network are not
accessible through DNS. To have the virtual machines running on the NAT network access each other by
DNS names, you must set up a private DNS server connected to the NAT network and configure the virtual
machines to use the DNS server.
Accessing External Networks from a NAT Network
For most client applications, including Web browsers, Telnet, passive-mode FTP, and downloaded streaming
video, a virtual machine on a NAT network can use any protocol using TCP or UDP if the virtual machine
initiates the network connection. Additional protocol support is built into the NAT device to allow FTP and
ICMP echo (ping) to work transparently through the NAT device.
On the external network, a virtual machine on the NAT network appears to be the host system because its
network traffic uses the host system IP address. The virtual machine can send and receive data by using
TCP/IP to any machine that is accessible from the host system.
Before any communication can occur, the NAT device must set up a map between the virtual machine
address on the private NAT network and the host network address on the external network. When a virtual
machine initiates a network connection with another network resource, this map is created automatically.
The operation is transparent to the user of the virtual machine on the NAT network.
Network connections that are initiated from outside the NAT network to a virtual machine on the NAT
network are not transparent. When a machine on the external network attempts to initiate a connection with
a virtual machine on the NAT network, it cannot reach the virtual machine because the NAT device does not
forward the request. You can configure port forwarding manually on the NAT device so that network traffic
destined for a certain port can still be forwarded automatically to a virtual machine on the NAT network.
File sharing of the type used by Windows operating systems and Samba is possible among computers on the
NAT network, including virtual machines and the host system. If you use WINS servers on your network, a
virtual machine that uses NAT networking can access shared files and folders on the host system that the
WINS server knows if those shared files and folders are in the same workgroup or domain.
Change NAT Settings
You can change the gateway IP address, configure port forwarding, and configure advanced networking
settings for NAT networks.
Prerequisites
186
n
Determine whether you are going to use the host virtual network adapter. The host system uses
VMware Network Adapter VMnet1 to connect to the host-only network and it uses VMware Network
Adapter VMnet8 to connect to the NAT network.
n
On a Windows host, log in as an Administrator user. Only an Administrator user can change network
settings in the virtual network editor.
n
On a Linux host, log in as root. You must enter the root password to use the virtual network editor.
VMware, Inc.
Chapter 9 Configuring Network Connections
Procedure
1
2
Start the virtual network editor on the host system.
Option
Description
Windows host
Select Edit > Virtual Network Editor.
Linux host
Select Applications > System Tools > Virtual Network Editor. The menu
path might be different for your version of Linux. You can also start the
network editor from the command line by using the vmware-netcfg
command.
Select the NAT network, and click NAT Settings.
By default, the NAT device is connected to the VMnet8 virtual switch. You can have only one NAT
virtual network.
Table 9‑2. NAT Settings
Setting
Description
Gateway IP
The gateway IP address for the selected network.
Port Forwarding
Add a port for port forwarding. With port forwarding, incoming TCP or UDP
requests are sent to a specific virtual machine on the virtual network that is
served by the NAT device.
Host port
The number of the incoming TCP or UDP port. For
example, incoming HTTP requests are usually on port
80.
Virtual machine
IP address
The IP address of the virtual machine to which you
want to forward the incoming requests.
Virtual machine
port
The port number to use for requests on the specified
virtual machine. It may be the standard port, such as
80 for HTTP, or a nonstandard port if software
running in the virtual machine is configured to accept
requests on a nonstandard port.
Description
(Optional) You can use this text box to identify the
forwarded service, for example, HTTP.
To change settings for an existing port, select its name and click Properties.
VMware, Inc.
Allow active FTP
Allow only passive mode FTP over the NAT device.
Allow any Organizationally
Unique Identifier
Select this setting if you change the organizationally unique identifier (OUI)
portion of the MAC address for the virtual machine and subsequently cannot
use NAT with the virtual machine.
UDP timeout (in seconds)
Select the number of minutes to keep the UDP mapping for the NAT.
Config port
Select the port to use to access status information about NAT.
Important Change this value only under the direction of VMware technical
support.
Enable IPv6
Enable NAT to use an IPv6 address.
IPv6 Prefix
If IPv6 is enabled, enter the IPv6 prefix that the NAT device uses.
187
Using VMware Workstation Pro
Table 9‑2. NAT Settings (Continued)
Setting
Description
DNS Settings
(Windows hosts only) Configure the DNS servers for the virtual NAT device to
use.
NetBios Settings
Auto detect
available DNS
servers
Select this option to detect the available DNS servers.
To add a DNS server to the list, deselect this check box
and enter the IP address of the preferred and alternate
DNS servers in the Preferred DNS server text boxes.
Policy
If you have multiple DNS servers, select the strategy
for choosing which server to send a request to. Order
sends one DNS request at a time in order of the name.
Rotate sends one DNS request at a time and rotates
through the DNS servers. Burst sends to three servers
and waits for the first server to respond.
Timeout (sec)
Select the number of seconds to keep trying if the NAT
device cannot connect to the DNS server.
Retries
Select the number of retries.
(Windows hosts only) Select NBNS (NetBIOS Name Service) and NBDS
(NetBIOS Datagram Service) timeouts and retry settings.
Editing the NAT Configuration File
If you are an advanced user, you can edit the NAT configuration file to modify NAT settings.
The location of the NAT configuration file depends on the host operating system.
Table 9‑3. NAT Configuration File Location
Host Operating System
NAT Configuration File Location
Windows Server 2008 R2, Windows
Server 2012 R2, Windows 7,
Windows 8 or Windows 10
C:\ProgramData\VMware\vmnetnat.conf
Linux
/etc/vmware/vmnet8/nat/nat.conf
The NAT configuration file is divided into sections, and each section configures a part of the NAT device.
Text surrounded by square brackets, such as [dns], marks the beginning of a section. Each section contains
one or more configuration parameters. The configuration parameters take the form ip = 192.168.27.1/24.
On a Windows host system, you can change the NAT configuration by using the virtual network editor. You
do not need to edit the NAT configuration file. On a Linux host system, you must edit the NAT
configuration file to modify the NAT configuration.
Important Make a backup copy of the NAT configuration file. If you edit the NAT configuration file and
then use the virtual network editor, your edits might be lost.
NAT Configuration File Sections
The NAT configuration file is divided into sections. The parameters in each section configure a part of the
NAT device.
[host] Section
The [host] section includes parameters to configure the NAT connection.
188
VMware, Inc.
Chapter 9 Configuring Network Connections
Table 9‑4. [host] Section Parameters
Parameter
Description
ip
The IP address that the NAT device should use. It can be followed by a slash and the
number of bits in the subnet.
netmask
The subnet mask to use for the NAT network. DHCP addresses are allocated from
this range of addresses.
configport
A port that can be used to access status information about the NAT device.
device
The VMnet device to use. Windows devices are of the form vmnetx where x is the
number of the VMnet. Linux devices are of the form /dev/vmnetx.
activeFTP
Flag to indicate if active FTP is to be allowed. Active FTP allows incoming
connections to be opened by the remote FTP server. Turning this off means that only
passive mode FTP works. Set this flag to 0 to turn it off.
[udp] Section
The [udp] section contains the timeout parameter, which specifies the number of seconds to keep the UDP
mapping for the NAT network.
[dns] Section
The [dns] section is for Windows hosts only. Linux hosts do not use this section.
Table 9‑5. [dns] Section Parameters
Parameter
Description
policy
Policy to use for DNS forwarding.
n
order sends one DNS request at a time in the order of the name servers.
n
rotate sends one DNS request at a time and rotate through the DNS servers.
n
burst sends to three servers and wait for the first one to respond.
timeout
Time in seconds before retrying a DNS request.
retries
Number of retries before the NAT device stops trying to respond to a DNS request.
autodetect
Flag to indicate whether the NAT device should detect the DNS servers available to
the host.
nameserver1
IP address of a DNS server to use.
nameserver2
IP address of a DNS server to use.
nameserver3
IP address of a DNS server to use.
If autodetect is on and some name servers are specified, the DNS servers specified in nameserver1,
nameserver2, and nameserver3 are added before the list of detected DNS servers.
[netbios] Section
The [netbios] section applies to Windows hosts only. Linux hosts do not use this section.
Table 9‑6. [netbios] Section Parameters
Parameter
Description
nbnsTimeout = 2
Timeout, in seconds, for NBNS queries.
nbnsRetries = 3
Number of retries for each NBNS query.
nbdsTimeout = 3
Timeout, in seconds, for NBDS queries.
VMware, Inc.
189
Using VMware Workstation Pro
[incomingtcp] Section
The [incomingtcp] section configures TCP port forwarding for NAT. You can assign a port number to an IP
address and port number on a virtual machine.
This example creates a map from port 8887 on the host to the IP address 192.168.27.128 and port 21.
8887 = 192.168.27.128:21
When this map is set and an external machine connects to the host at port 8887, the network packets are
forwarded to port 21 (the standard port for FTP) on the virtual machine that has IP address 192.168.27.128.
[incomingudp] Section
The [incomingudp] section configures UDP port forwarding for NAT. You can assign a port number to an IP
address and port number on a virtual machine.
This example creates a map from port 6000 on the host to the IP address 192.168.27.128 and port 6001.
6000 = 192.168.27.128:6001
When this map is set and an external machine connects to the host at port 6000, the network packets are
forwarded to port 6001 on the virtual machine that has IP address 192.168.27.128.
Sample Linux nat.conf File
This is an example of a NAT configuration file on a Linux host system.
# Linux NAT configuration file
[host]
# NAT gateway address
ip = 192.168.237.2/24
hostMAC = 00:50:56:C0:00:08
# enable configuration; disabled by default for security reasons
#configport = 33445
# vmnet device if not specified on command line
device = vmnet8
# Allow PORT/EPRT FTP commands (they need incoming TCP stream...)
activeFTP = 1
# Allows the source to have any OUI. Turn this one if you change the OUI
# in the MAC address of your virtual machines.
#allowAnyOUI = 1
[udp]
# Timeout in seconds, 0 = no timeout, default = 60; real value might
# be up to 100% longer
timeout = 30
[dns]
# This section applies only to Windows.
#
# Policy to use for DNS forwarding. Accepted values include order,
# rotate, burst.
#
# order: send one DNS request at a time in order of the name servers
# rotate: send one DNS request at a time, rotate through the DNS servers
# burst: send to three servers and wait for the first one to respond
policy = order;
# Timeout in seconds before retrying DNS request.
timeout = 2
# Retries before giving up on DNS request
retries = 3
190
VMware, Inc.
Chapter 9 Configuring Network Connections
# Automatically detect the DNS servers
autodetect = 1
# List of DNS servers to use. Up to three may be specified
#nameserver1 = 208.23.14.2
#nameserver2 = 63.93.12.3
#nameserver3 = 208.23.14.4
[netbios]
# This section applies only to Windows.
# Timeout for NBNS queries.
nbnsTimeout = 2
# Number of retries for each NBNS query.
nbnsRetries = 3
# Timeout for NBDS queries.
nbdsTimeout = 3
[incomingtcp]
# Use these with care - anyone can enter into your virtual machine through
# these...
# FTP (both active and passive FTP is always enabled)
#
ftp localhost 8887
#8887 = 192.168.27.128:21
# WEB (make sure that if you are using named webhosting, names point to
#
your host, not to guest... And if you are forwarding port other
#
than 80 make sure that your server copes with mismatched port
#
number in Host: header)
#
lynx http://localhost:8888
#8888 = 192.168.27.128:80
# SSH
#
ssh -p 8889 root@localhost
#8889 = 192.168.27.128:22
[incomingudp]
# UDP port forwarding example
#6000 = 192.168.27.128:6001
Using NAT with NetLogon
If you use NAT networking in a Windows virtual machine running on a Windows host system, you can use
NetLogon to log in to a Windows domain from the virtual machine and access file shares that the WINS
server knows.
To use NetLogon, you need to set up the virtual machine to use NetLogon. The setup process is similar to
the way you set up a physical computer on one LAN that is using a domain controller on another LAN.
To log in to a Windows domain outside the virtual NAT network, the virtual machine needs access to a
WINS server for that domain. If the WINS server that the DHCP server uses on the NAT network is already
set up on the host system, you can connect the virtual machine to it. To connect from the virtual machine to
a WINS server that is not set up on the host system, you must manually configure the IP address of the
WINS server.
After the virtual machine has an IP address for a WINS server, you can use NetLogon in the virtual machine
to log in to a domain and access shares in that domain. Your access is limited to shares of virtual machines
that are on the same NAT network or are bridged on the same domain.
For example, if the WINS server covers a domain with a domain controller, you can access that domain
controller from the virtual machine and add the virtual machine to the domain. You need the Administrator
user ID and password for the domain controller.
VMware, Inc.
191
Using VMware Workstation Pro
Use NAT to Connect to an Existing WINS Server on the Host
If the WINS server that the DHCP server uses on the NAT network is already set up on the host system, you
can connect the virtual machine to it.
You can use this procedure for Windows guest operating systems. The steps might be different, depending
on the Windows operating system type.
Procedure
1
In the Windows virtual machine, right-click My Network Places and select Properties.
2
Right-click the virtual network adapter and click Properties.
3
In the Properties dialog box, select Internet Protocol (TCP/IPv4) and click Properties.
4
In the TCP/IP Properties dialog box, click Advanced.
5
On the WINS tab, under the NetBIOS setting, select Default: Use NetBIOS setting from DHCP Server.
6
Click OK twice and click Close.
Configure the IP Address of a WINS Server Manually
To connect from a virtual machine to a WINS server that is not set up on the host system, you must
manually configure the IP address of the WINS server.
You can use this procedure for Windows 2000, XP, 2003 Server, and 9x guest operating systems. The steps
might be different, depending on the Windows operating system type. Repeat this procedure for each WINS
server that you want to connect to from the virtual machine.
Procedure
1
In the Windows virtual machine, right-click My Network Places and select Properties.
2
In the Network Connections window, right-click the virtual network adapter and choose Properties.
3
In the Properties dialog box, select Internet Protocol (TCP/IPv4) and click Properties.
4
In the TCP/IP Properties dialog box, click Advanced.
5
On the WINS tab, click Add.
6
In the TCP/IP WINS Server dialog box, type the IP address for the WINS server in the WINS server text
box and click Add.
The IP address of the WINS server appears in the WINS addresses list on the WINS tab.
7
Click OK twice and click Close.
Specifying Connections from Source Ports Below 1024
If a virtual machine that uses NAT attempts to connect to a server that requires the client to use a source port
below 1024, the NAT device must forward the request from a port below 1024. For security reasons, some
servers accept connections only from source ports below 1024.
The parameters that control virtual machine source and destination ports are in the [privilegedUDP] and
[privilegedTCP] sections in the NAT configuration file. You might need to add settings or modify settings in
either or both of these sections, depending on the kind of connection you need to make. You can set two
parameters, each of which appears on a separate line.
192
VMware, Inc.
Chapter 9 Configuring Network Connections
Table 9‑7. Parameters that Map Virtual Machine Source and Destination Ports
Parameter
Description
autodetect = n
Determines whether the NAT device attempts to map virtual machine source ports below
1024 to NAT source ports below 1024. A setting of 1 means true. A setting of 0 means
false. On a Windows host, the default is 1 (true). On a Linux host, the default is 0 (false).
port = n
Specifies a destination port, where n is the port on the server that accepts the connection
from the client. When a virtual machine connects to the specified port on any server, the
NAT device attempts to make the connection from a source port below 1024. You can
include one or more port settings in the [privilegedUDP] or [privilegedTCP] section
or in both sections, as required for the connections you need to make. Enter each port
setting on a separate line.
See “Editing the NAT Configuration File,” on page 188 for more information.
Configuring Host-Only Networking
When you install Workstation Pro on a Windows or Linux host system, a host-only network (VMnet1) is set
up for you. Host-only networking is useful if you need to set up an isolated virtual network. In a host-only
network, the virtual machine and the host virtual network adapter are connected to a private Ethernet
network. The network is completely contained within the host system.
The network connection between the virtual machine and the host system is provided by a virtual network
adapter that is visible on the host operating system. The virtual DHCP server provides IP addresses on the
host-only network.
Figure 9‑3. Host-Only Networking Configuration
virtual
network
adapter
virtual machine
virtual network switch
(VMnet1)
host
network
adapter
DHCP server
In the default configuration, a virtual machine in a host-only network cannot connect to the Internet. If you
install the proper routing or proxy software on the host system, you can establish a connection between the
host virtual network adapter and a physical network adapter on the host system to connect the virtual
machine to a Token Ring or other non-Ethernet network.
On a Windows host computer, you can use host-only networking in combination with the Internet
Connection Sharing feature in Windows to allow a virtual machine to use the dial-up networking adapter or
other connection to the Internet on the host system. See Microsoft documentation for information on
configuring Internet Connection Sharing.
n
Add a Host-Only Network on page 194
When you install Workstation Pro on a Windows or Linux host system, a host-only network (VMnet1)
is set up for you. You might want to configure multiple host-only networks to manage network traffic
between virtual machines in specific ways.
VMware, Inc.
193
Using VMware Workstation Pro
n
Configure Host-Only Networking for an Existing Virtual Machine on page 195
You can configure host-only networking for an existing virtual machine. You can connect a virtual
network adapter to the default host-only network (VMnet1) or to a custom host-only network. If a
virtual machine has two virtual network adapters, you can connect it to two host-only networks.
n
Set Up Routing Between Two Host-Only Networks on page 195
If you are setting up a complex test network that uses virtual machines, you might want to have two
independent host-only networks with a router between them.
n
Avoiding IP Packet Leakage in Host-Only Networks on page 197
Each host-only network should be confined to the host system on which it is set up. Packets that
virtual machines send on this network should not leak out to a physical network attached to the host
system. Packet leakage can occur only if a machine actively forwards packets.
n
Controlling Routing Information for Host-Only Networks on Linux on page 198
A host-only network has a network interface associated with it (vmnet1) that is marked up when the
host operating system is booted. Routing server processes that operate on the host operating system
automatically discover the host-only network and propagate information on how to reach the
network, unless you explicitly configure them not to do so.
n
Using DHCP and DDNS with Host-Only Networking on Linux on page 198
The virtual DHCP server in Workstation Pro cannot update a DNS server by using a Dynamic Domain
Name Service (DDNS). For this reason, you should use DHCP to supply IP addresses as well as other
information, such as the identity of a host running a name server and the nearest router or gateway.
Add a Host-Only Network
When you install Workstation Pro on a Windows or Linux host system, a host-only network (VMnet1) is set
up for you. You might want to configure multiple host-only networks to manage network traffic between
virtual machines in specific ways.
For example, you can set up multiple host-only networks on the same host system to test routing between
two virtual networks or test a virtual machine that has multiple network interface cards without using any
physical network adapters. You might also want to have two virtual machines connected to one host-only
network and other virtual machines connected to another host-only network to isolate the network traffic on
each network.
Prerequisites
n
On a Windows host, log in as an Administrator user. Only an Administrator user can change network
settings in the virtual network editor.
n
On a Linux host, log in as root. You must enter the root password to use the virtual network editor.
Procedure
1
Select Edit > Virtual Network Editor.
2
Click Add Network and select a network to add, for example, VMnet2.
You can create a custom host-only network on VMnet2 to VMnet7. On Windows hosts, you can also use
VMnet9. On Linux hosts, you can also use vmnet10 through vmnet255.
The new network is configured as a host-only network by default.
3
Click OK to save your changes.
After the host-only networks are set up on a Linux host system, at least four network interfaces appear: eth0,
lo, vmnet1, and vmnet2. These four interfaces should have different IP addresses on separate subnets.
194
VMware, Inc.
Chapter 9 Configuring Network Connections
Configure Host-Only Networking for an Existing Virtual Machine
You can configure host-only networking for an existing virtual machine. You can connect a virtual network
adapter to the default host-only network (VMnet1) or to a custom host-only network. If a virtual machine
has two virtual network adapters, you can connect it to two host-only networks.
To configure host-only networking for a new virtual machine, select Customize Hardware when you run
the New Virtual Machine wizard.
Prerequisites
To connect the virtual machine to two host-only networks, add a second virtual network adapter to the
virtual machine. See “Add a Virtual Network Adapter to a Virtual Machine,” on page 178.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab select a virtual network adapter.
3
Select the host-only network.
Option
Action
Use the default host-only network
(VMnet1)
Select Host-only: A private network shared with the host.
Use a custom host-only network
Select Custom and select the custom host-only network from the dropdown menu.
4
To connect the virtual machine to a second host-only network, select another virtual network adapter
and select the second host-only network.
5
Click OK to save your changes.
What to do next
Assign IP addresses to the virtual network adapters. To see the IP address that a host-only network is using,
use the ipconfig /all command on a Windows host or the ipconfig command on a Linux host.
Set Up Routing Between Two Host-Only Networks
If you are setting up a complex test network that uses virtual machines, you might want to have two
independent host-only networks with a router between them.
You can run the router software on the host system or on its own virtual machine. In both cases, you need
two host-only networks.
In a simple configuration, you configure one virtual machine on each of the host-only networks. For more
complex configurations, you can add more virtual machines and host-only networks.
Prerequisites
Create a second host-only network. On Windows and Linux host systems, the first host-only network
(VMnet1) is set up for you when you install Workstation Pro. See “Add a Host-Only Network,” on page 194.
VMware, Inc.
195
Using VMware Workstation Pro
Procedure
1
2
3
Set up the connection to the first host-only network.
a
Select the virtual machine and select VM > Settings.
b
On the Hardware tab, select Network Adapter.
c
Select Host-only to connect to the default host-only network (VMnet1).
Set up the connection to the second host-only network.
a
Select the virtual machine and select VM > Settings.
b
On the Hardware tab, select Network Adapter.
c
Select Custom and select the custom host-only network from the drop-down menu.
(Optional) To run the router software on a virtual machine, set up a third virtual machine that has
connections to the two host-only networks.
a
Select the virtual machine and select VM > Settings.
b
On the Hardware tab, select Network Adapter.
c
Select Host-only.
The adapter is connected to the default host-only interface (VMnet1).
d
4
196
Select the second network adapter, select Custom, and select the custom host-only network from
the drop-down menu.
Stop the VMware DHCP Server service.
Option
Description
Windows host
Use the services.msc command to open the Services Console and stop
the VMware DHCP Service.
Linux host
Use the killall -TERM vmnet-dhcpd command to stop the vmnetdhcpd service.
5
Install the router software on the host system or in the third virtual machine, depending on the
approach you are using.
6
Configure networking in the first two virtual machines to use addresses on the appropriate host-only
network.
Option
Description
Windows host
Use the ipconfig /all command to determine which IP addresses each
host-only network is using.
Linux host
Use the ifconfig command to determine which IP addresses each hostonly network is using.
VMware, Inc.
Chapter 9 Configuring Network Connections
7
8
Assign IP addresses.
Option
Description
The router software is on the host
system
Assign default router addresses based on the addresses of the host-only
adapters on the host computer. In the first virtual machine, the default
router address should be the IP address for the host-only adapter
connected to VMnet1. In the second virtual machine, the default router
address should be the IP address for the host-only adapter connected to
VMnet2.
The router software is in a third
virtual machine
Set the default router addresses in the first two virtual machines based on
the addresses that the third virtual machine. In the first virtual machine,
the default router address should be the IP address for the network
adapter connected to VMnet1 in third virtual machine. In the second
virtual machine, the default router address should be the IP address for the
network adapter connected to VMnet2 in third virtual machine.
Ping the router machine from the first and second virtual machines.
If the router software is set up correctly, you can communicate between the first and second virtual
machines.
Avoiding IP Packet Leakage in Host-Only Networks
Each host-only network should be confined to the host system on which it is set up. Packets that virtual
machines send on this network should not leak out to a physical network attached to the host system. Packet
leakage can occur only if a machine actively forwards packets.
If you use dial-up networking support in a virtual machine and packet forwarding is enabled, host-only
network traffic might leak out through the dial-up connection. To prevent the leakage, disable packet
forwarding in the guest operating system.
If the host system has multiple network adapters, it might be intentionally configured to use IP forwarding.
If that is the case, you do not want to disable forwarding. To avoid packet leakage, you must enable a packet
filtering facility and specify that packets from the host-only network should not be sent outside the host
system. See the operating system documentation for information on configuring packet filtering.
Disable Packet Forwarding on a Windows Host
Systems that use server versions of Windows operating systems can forward IP packets that are not
addressed to them. These systems, and Windows Vista and Windows 7 and later systems, have IP packet
forwarding disabled by default.
If packets are leaking from a host-only network on a Windows host system, check whether packet
forwarding is enabled on the host system. If packet forwarding is enabled, you must disable it.
Procedure
u
On a Windows Vista or Windows 7 or later host, stop the Routing and Remote Access service.
a
Type services.msc to open the Services Console.
b
Select Routing and Remote Access and click Stop.
Disable Packet Forwarding on a Linux Host
If packets are leaking from a host-only network on a Linux host system, packet forwarding might be
mistakenly enabled on the host system. If packet forwarding is enabled, you must disable it.
How you disable packet forwarding depends on your Linux distribution. For example, you might be able to
use a control panel, specify a setting at the time you compile your kernel, or enter a specification when you
boot your system. See the operating system documentation for more information.
VMware, Inc.
197
Using VMware Workstation Pro
Procedure
u
As root, write a 0 (zero) to the special file /proc/sys/net/ipv4/ip_forward.
echo "0" > /proc/sys/net/ipv4/ip_forward
Controlling Routing Information for Host-Only Networks on Linux
A host-only network has a network interface associated with it (vmnet1) that is marked up when the host
operating system is booted. Routing server processes that operate on the host operating system
automatically discover the host-only network and propagate information on how to reach the network,
unless you explicitly configure them not to do so.
If you are running the routed or gated daemon only to receive routing information, the simplest solution is
to run the routing configuration with the -q option so that the host-only network receives, but does not
supply, routing information.
If you are running routing services to supply routing information, configure the services so that they do not
advertise routes to the host-only network. The routed daemon version that is included with many Linux
distributions does not support specifying that an interface should not be advertised. See the routed(8)
manual page for your system for more information.
If you are using the gated daemon, you must explicitly exclude the vmnet1 interface from any protocol
activity. If you need to run virtual machines on a host-only network on a multihomed system where gated is
used and you experience problems, contact VMware technical support.
Using DHCP and DDNS with Host-Only Networking on Linux
The virtual DHCP server in Workstation Pro cannot update a DNS server by using a Dynamic Domain
Name Service (DDNS). For this reason, you should use DHCP to supply IP addresses as well as other
information, such as the identity of a host running a name server and the nearest router or gateway.
To use names to communicate with other virtual machines, you must either edit the DHCP configuration file
for vmnet1 (/etc/vmware/vmnet1/dhcpd/dhcpd.conf), or use IP addresses that are statically bound to a host
name. Editing the DHCP server configuration file requires information that is best obtained directly from
the DHCP server documentation. See the dhcpd(8) and dhcpd.conf(8) manual pages.
Note The edits made inside the read-only section of the DHCP configuration file are lost the next time you
run the virtual network editor.
Troubleshooting DHCPD Problems on a Linux Host
If a DHCP server (dhcpd) utility was running on the Linux host system before you installed Workstation Pro,
it might have noticed that an additional network interface, vmnet1, was marked up and available for use
when host-only networking was configured.
Some dhcpd implementations abort if their configuration files do not include a subnet specification for the
interface. This can happen even if dhcpd is not supposed to respond to messages that arrive through the
interface.
The best solution is to add a line to the dhcpd configuration file in the format
subnet net.0 netmask 255.255.255.0 {}. The net value is the network number assigned to the host-only
network, for example, 192.168.0. This line in the configuration file informs dhcpd about the host-only
network and tells it explicitly not to respond to any dhcpd requests arriving from that network.
An alternative solution is to explicitly state the set of network interfaces for dhcpd to monitor each time you
start the program. For example, if the host system has one Ethernet interface (eth0), list the interface on the
command line each time you start dhcpd.
dhcpd eth0
198
VMware, Inc.
Chapter 9 Configuring Network Connections
This solution prevents dhcpd from searching for all available network interfaces.
If these solutions do not work for your DHCP server program, it might be an older version of the program
and you can try upgrading to more current version. DHCP server programs are available from the Internet
Systems Consortium (ISC) Web site.
Assigning IP Addresses in Host-Only Networks and NAT
Configurations
The host system and all virtual machines configured for host-only networking are connected to the network
through a virtual switch. Typically, all the parties on this network use the TCP/IP protocol suite, although
other communication protocols can be used.
A NAT configuration also sets up a private network, which must be a TCP/IP network. The virtual machines
configured for NAT are connected to that network through a virtual switch. A host virtual network adapter
connects the host system to the private network used for NAT. Each virtual machine and the host system
must be assigned addresses on the private network.
When host-only networking is enabled at the time Workstation Pro is installed, the subnet IP address for the
virtual network is automatically selected as an unused private subnet IP address. A NAT configuration also
uses an unused private network automatically selected when you install Workstation Pro. The subnet
number associated with a virtual network is shown in the virtual network editor.
IP addresses are typically assigned by using the virtual DHCP server included with Workstation Pro. IP
addresses can also be assigned statically from a pool of addresses that the virtual DHCP server does not
assign. Using DHCP to assign IP addresses is simpler and more automatic than statically assigning them.
Most Windows operating systems are preconfigured to use DHCP at boot time, so Windows virtual
machines can connect to the network the first time they are booted, without additional configuration.
If you want virtual machines to communicate with each other by using names instead of IP addresses, you
must set up a naming convention, a name server on the private network, or both. In this case, it might be
simpler to use static IP addresses.
In general, if you have virtual machines that you intend to use frequently or for extended periods of time, it
is more convenient to assign static IP addresses or configure the virtual DHCP server to always assign the
same IP address to each of these virtual machines. For temporary virtual machines, let the virtual DHCP
allocate IP addresses.
Note The virtual DHCP server does not service virtual or physical machines residing on bridged
networks.
n
Change DHCP Settings for a Host-Only or NAT Network on a Windows Host on page 200
You can use the virtual network editor to change DHCP settings for a host-only or NAT network on a
Windows host system.
n
Change the Subnet Settings for a Host-Only or NAT Network on a Windows Host on page 200
You can use the virtual network editor to change the subnet IP address and subnet mask for a hostonly or NAT network on a Windows host system.
n
Change the Subnet IP Address for a Host-Only or NAT Network on a Linux Host on page 201
You can use the virtual network editor to change the subnet IP address for a host-only or NAT
network on a Linux host system.
n
DHCP Conventions for Assigning IP Addresses in Host-Only and NAT Networks on page 202
For each host-only or NAT network, the virtual DHCP server allocates available IP addresses by using
certain conventions. Workstation Pro always uses a Class C address for host-only and NAT networks.
VMware, Inc.
199
Using VMware Workstation Pro
Change DHCP Settings for a Host-Only or NAT Network on a Windows Host
You can use the virtual network editor to change DHCP settings for a host-only or NAT network on a
Windows host system.
Prerequisites
n
Verify that you have administrative privileges on the host system.
n
Familiarize yourself with the DHCP conventions for assigning IP addresses. See “DHCP Conventions
for Assigning IP Addresses in Host-Only and NAT Networks,” on page 202.
Procedure
1
Log in to the host system as an Administrator user.
Only an Administrator user can change network settings in the virtual network editor.
2
Select Edit > Virtual Network Editor.
3
Select the host-only or NAT network.
4
To use the virtual DHCP server to assign IP addresses to virtual machines on the network, select Use
local DHCP service to distribute IP addresses to VMs.
5
To change additional DHCP settings, click DHCP Settings.
You can change the range of IP addresses that the virtual DHCP server provides on the selected
network and the duration of DHCP licenses that the DHCP server provides to clients on the virtual
network.
6
Click OK to save your changes.
Change the Subnet Settings for a Host-Only or NAT Network on a Windows
Host
You can use the virtual network editor to change the subnet IP address and subnet mask for a host-only or
NAT network on a Windows host system.
The default subnet mask is 255.255.255.0, which is a Class C address. Typically, you should modify only the
third number in the IP address, for example, x in 192.168.x.0 or 198.16.x.0. In general, do not change the
subnet mask. Certain virtual network services might not work as well with a customized subnet mask.
When you modify the subnet mask, Workstation Pro updates the IP address settings for other components,
including DHCP, NAT, and the host virtual network adapter, if the default settings were never changed.
Settings that are automatically updated include the DHCP lease range and DHCP server address, the NAT
gateway address, and the host network adapter IP address.
If you change any of these settings from their default values, Workstation Pro does not update that setting
automatically if the value is within the valid range. If the value exceeds the valid range, Workstation Pro
resets the settings based on the subnet range. Workstation Pro presumes that a custom setting should not be
modified, even if you later change the setting back to its default value.
Prerequisites
200
n
Verify that you have administrative privileges on the host system.
n
Familiarize yourself with the DHCP conventions for assigning IP addresses. See “DHCP Conventions
for Assigning IP Addresses in Host-Only and NAT Networks,” on page 202.
VMware, Inc.
Chapter 9 Configuring Network Connections
Procedure
1
Log in to the host system as an Administrator user.
Only an Administrator user can change network settings in the virtual network editor on a Windows
host system.
2
Select Edit > Virtual Network Editor.
3
Select the host-only or NAT network.
4
To change the subnet IP address, type a new value in the Subnet IP text box.
The address should specify a valid network address that is suitable for use with the subnet mask.
5
To change the subnet mask, type a new value in the Subnet mask text box.
6
Click OK to save your changes.
Change the Subnet IP Address for a Host-Only or NAT Network on a Linux Host
You can use the virtual network editor to change the subnet IP address for a host-only or NAT network on a
Linux host system.
You can also use the virtual network editor to specify that a local DHCP service distributes IP addresses to
virtual machines. To change DHCP settings further, you must edit the DHCP server configuration file
(dhcp.conf). See “Editing the DHCP Server Configuration File,” on page 201.
Prerequisites
n
Verify that you have root access on the host system.
n
Familiarize yourself with the DHCP conventions for assigning IP addresses. See “DHCP Conventions
for Assigning IP Addresses in Host-Only and NAT Networks,” on page 202.
Procedure
1
Log in to the Linux host system as root.
You must enter the root password to use the virtual network editor on a Linux host system.
2
Select Applications > System Tools > Virtual Network Editor to start the virtual network editor.
The menu path might be different for your version of Linux. You can also start the network editor from
the command line by using the vmware-netcfg command.
3
Select the virtual network.
4
Change the subnet IP address.
Option
Description
Select an unused subnet IP address
Leave the Subnet IP text box empty.
Configure a specific subnet IP
address
Type the subnet IP address that you want to use in the Subnet IP text box.
5
To have the virtual DHCP server distribute IP addresses to virtual machines on the network, select Use
local DHCP service to distribute IP addresses to VMs.
6
Click Save to save your changes.
Editing the DHCP Server Configuration File
If you are an advanced user, you can edit the DHCP server configuration file to modify DHCP settings.
The location of the DHCP server configuration file depends on the operating system type.
VMware, Inc.
201
Using VMware Workstation Pro
Table 9‑8. DHCP Configuration File Location
Host Operating System
DHCP Server Configuration File Location
Windows Server 2008 R2, Windows
Server 2012 R2, Windows 7,
Windows 8, or Windows 10
C:\ProgramData\VMware\vmnetdhcp.conf
Linux
For the default host-only network: /etc/vmware/vmnet1/dhcp/dhcp.conf
For the NAT network: /etc/vmware/vmnet8/dhcp/dhcp.conf
On a Windows host system, you can change DHCP settings by using the virtual network editor. You do not
need to edit the DHCP server configuration file.
On a Linux host system, you can use the virtual network editor to specify that a local DHCP service
distributes IP addresses to virtual machines on the network. To change DHCP settings further, you must edit
the DHCP server configuration file. Editing the DHCP server configuration file requires information that is
best obtained directly from the DHCP server documentation. See the dhcpd(8) and dhcpd.conf(8) manual
pages.
Note Changes made to the read-only section of the DHCP configuration file are lost the next time you run
the virtual network editor.
DHCP Conventions for Assigning IP Addresses in Host-Only and NAT Networks
For each host-only or NAT network, the virtual DHCP server allocates available IP addresses by using
certain conventions. Workstation Pro always uses a Class C address for host-only and NAT networks.
The net value is the network number assigned to the host-only or NAT network.
Table 9‑9. IP Address Use on a Host-Only Network
Range
Address Use
Example
net.1
Host machine
192.168.0.1
net.2–net.127
Static addresses
192.168.0.2–192.168.0.127
net.128–net.253
DHCP-assigned
192.168.0.128–192.168.0.253
net.254
DHCP server
192.168.0.254
net.255
Broadcasting
192.168.0.255
Table 9‑10. IP Address Use on a NAT Network
202
Range
Address Use
Example
net.1
Host machine
192.168.0.1
net.2
NAT device
192.168.0.2
net.3–net.127
Static addresses
192.168.0.3–192.168.0.127
net.128–net.253
DHCP-assigned
192.168.0.128–192.168.0.253
net.254
DHCP server
192.168.0.254
net.255
Broadcasting
192.168.0.255
VMware, Inc.
Chapter 9 Configuring Network Connections
Configuring LAN Segments
A LAN segment is a private network that is shared by other virtual machines. A LAN segment can be useful
for multitier testing, network performance analysis, and situations where virtual machine isolation are
important.
Create a LAN Segment for a Virtual Machine
You create a LAN segment by configuring virtual machine network settings. When you convert a team that
was created in an earlier version of Workstation Pro, the LAN segment configuration is retained for each
virtual machine. You do not need to recreate the LAN segment.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Network Adapter.
3
Click LAN Segments.
4
Click Add, type a name for the LAN segment, and click OK.
5
Click OK to save your changes.
What to do next
Configure the virtual machine to use the LAN segment. See “Configure a Virtual Machine to Use a LAN
Segment,” on page 203.
Configure a Virtual Machine to Use a LAN Segment
You can configure an existing virtual machine to use a LAN segment, and you can change the LAN segment
that a virtual machine is currently using.
In this release of Workstation Pro, bandwidth and packet loss settings are associated with individual virtual
machines rather than LAN segments. See “Configure Bandwidth and Packet Loss Settings for a Virtual
Machine,” on page 180.
Prerequisites
n
If the LAN segment does not already exist, create it. See “Create a LAN Segment for a Virtual
Machine,” on page 203.
n
To configure a virtual machine to use multiple LAN segments, you must configure the virtual machine
to have multiple network adapters. See “Add a Virtual Network Adapter to a Virtual Machine,” on
page 178.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Network Adapter.
3
Select LAN segment and select the LAN segment from the drop-down menu.
4
Click OK to save your changes.
VMware, Inc.
203
Using VMware Workstation Pro
What to do next
When you add an existing virtual machine to a LAN segment, the virtual machine might be configured to
expect an IP address from a DHCP server. Unlike host-only and NAT networking, Workstation Pro does not
provide a DHCP server for LAN segments. You must manually configure IP addressing for virtual machines
on a LAN segment. You can either configure a DHCP server on the LAN segment to allocate IP addresses, or
you can configure a fixed IP address for each virtual machine on the LAN segment.
Delete a LAN Segment
Deleting a LAN segment disconnects all virtual network adapters that are configured for that LAN segment.
When you delete a LAN segment, you must manually configure its disconnected virtual network adapter to
reconnect the virtual machine to a network.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select Network Adapter.
3
Click LAN Segments, select the LAN segment, click Remove, and click OK.
4
Either select another LAN segment or change the network connection type for the virtual machine.
5
Click OK to save your changes.
What to do next
If you deleted a LAN segment that is being used by other virtual machines, select another LAN segment or
change the network connection type for those virtual machines. See “Modify an Existing Virtual Network
Adapter for a Virtual Machine,” on page 178.
Configuring Samba for Workstation Pro
If you have Samba on a Linux host system, you can configure it so that it works with Workstation Pro.
You must modify the Samba configuration so that it includes the IP subnet that the vmnet1 virtual network
adapter uses. You can determine which subnet vmnet1 uses by using the command /sbin/ifconfig vmnet1.
You must also make sure the Samba password file includes entries for all users of the virtual machine who
will access the host file system. The user names and passwords in the Samba password file must match
those used for logging on to the guest operating system.
Add Users to the Samba Password File
You can add user names and passwords to the Samba password file at any time from a terminal window on
the Linux host system. The Samba password file must include entries for all users of the virtual machine
who will access the host file system.
Procedure
1
Log in to the root account.
2
Run the Samba password command with the user name to add to the password file.
For example: smbpasswd -a user_name
204
3
Follow the instructions on the screen.
4
Log out of the root account.
VMware, Inc.
Chapter 9 Configuring Network Connections
Use a Samba Server for Bridged or Host-Only Networking
You can use a Samba server for bridged or host-only networking.
Procedure
1
Open the Samba configuration file (/etc/samba/smb.conf) in a text editor.
2
Add the interfaces parameter and set it to VMnet interface.
You can define the interface parameter so that the Samba server serves multiple interfaces. This
example tells the Samba server to monitor and use both the eth0 and vmnet1 interfaces, which are the
networks that bridged and host-only networking use
For example: interface = eth0 vmnet1
3
Restart Samba.
Use Samba Without Network Access
You can make Samba inaccessible from the physical network interface.
Procedure
1
Open the Samba configuration file (/etc/samba/smb.conf) in a text editor.
2
Add the interfaces parameter and set it to vmnet*.
For example: interfaces = vmnet*
3
Restart Samba.
Using Virtual Network Adapters in Promiscuous Mode on Linux Hosts
Workstation Pro does not allow the virtual network adapter to go into promiscuous mode unless the user
running Workstation Pro has permission to make that setting. This restriction follows the standard Linux
practice that only the root user can put a network interface into promiscuous mode.
When you install and configure Workstation Pro, you must run the installation as the root user. Because
Workstation Pro creates the vmnet devices with root ownership and root group ownership, only the root
user has read and write permissions to the devices.
To set a virtual machine network adapter to promiscuous mode, you must launch Workstation Pro as the
root user because you must have read and write access to the vmnet device. For example, if you use bridged
networking, you must have access to /dev/vmnet0.
To grant selected users read and write access to the vmnet device, you can create a new group, add the
appropriate users to the group, and grant that group read and write access to the appropriate device. You
must make these changes on the host operating system as the root user.
In this example, newgroup is the group that should be able to set vmnet0 to promiscuous mode.
chgrp newgroup /dev/vmnet0
chmod g+rw /dev/vmnet0
In the next example, all users are able to set vmnet0 to promiscuous mode.
chmod a+rw /dev/vmnet0
VMware, Inc.
205
Using VMware Workstation Pro
Maintaining and Changing MAC Addresses for Virtual Machines
When a virtual machine is powered on, Workstation Pro assigns each of its virtual network adapters an
Ethernet media access control (MAC) address. A MAC address is the unique address assigned to each
Ethernet network device.
A virtual machine is assigned the same MAC address every time it is powered unless the virtual machine
configuration (.vmx) file is moved or changes are made to certain settings in the configuration file.
Moving the file to a different host system, or even moving it to a different location on the same host system,
changes the MAC address.
The MAC address changes if you remove or change any of these options in the virtual machine
configuration (.vmx) file.
n
ethernet[n].generatedAddress
n
ethernet[n].addressType
n
ethernet[n].generatedAddressOffset
n
uuid.location uuid.bios
n
ethernet[n].present
In these options, [n] is the number of the virtual network adapter. If you never edit the configuration file by
hand and do not remove the virtual network adapter, these settings remain unchanged.
Workstation Pro cannot guarantee to automatically assign unique MAC addresses for virtual machines that
run on multiple host systems.
Note To preserve the MAC address for a virtual network adapter, you must be careful not to remove the
adapter. If you remove the adapter but later recreate it, the adapter might receive a different MAC address.
Change the MAC Address for a Virtual Machine
You can use advanced virtual network adapter settings to assign a new MAC address to a virtual machine.
Note You cannot configure advanced virtual network adapter settings for a shared or remote virtual
machine.
Procedure
1
Select the virtual machine and select VM > Settings.
2
On the Hardware tab, select the virtual network adapter and click Advanced.
3
Type a new MAC address in the MAC Address text box, or click Generate to have Workstation Pro
generate a new address.
4
Click OK to save your changes.
Manually Assign a MAC Address to a Virtual Machine
You can manually assign a MAC address to a virtual machine.
You might want to assign a MAC address to guarantee that the same address is assigned to a virtual
machine every time it powers on, even it is moved, or to be sure that a unique MAC address is provided for
each virtual machine in a networked environment.
206
VMware, Inc.
Chapter 9 Configuring Network Connections
Procedure
1
Use a text editor to remove the following options from the virtual machine configuration (.vmx) file.
ethernet[n].generatedAddress
ethernet[n].addressType
ethernet[n].generatedAddressOffset
In these options, [n] is the number of the virtual network adapter.
2
Add the ethernet[n].address option to the .vmx file above the UUID lines in the file and set it to the
MAC address.
For example: ethernet[n].address = 00:50:56:XX:YY:ZZ
In this line, the fourth pair of numbers, XX, must be a valid hexadecimal number between 00h and 3Fh,
and YY and ZZ must be valid hexadecimal numbers between 00h and FFh. You must use this format.
Workstation Pro virtual machines do not support arbitrary MAC addresses.
A value for XX:YY:ZZ that is unique among your hard-coded addresses avoids conflicts between the
automatically assigned MAC addresses and the manually assigned addresses.
Sample Custom Networking Configuration
There are many ways to combine devices on a virtual network. This example shows server connections
through multiple firewalls.
You can combine devices on a virtual network in many ways. In this example, a Web server connects
through a firewall to an external network and an administrator's computer connects to the Web server
through a second firewall.
Figure 9‑4. Custom Configuration with Two Firewalls
host
network
adapter
virtual bridge
virtual
network
adapter
virtual machine 2
Web server
virtual
network
adapter
virtual network switch
(VMnet2)
virtual
network
adapter
virtual machine 3
firewall
VMware, Inc.
virtual network switch virtual
(VMnet0)
network
adapter
virtual network switch
(VMnet3)
virtual
network
adapter
virtual machine 1
firewall
virtual
network
adapter
virtual machine 4
“internal” PC
207
Using VMware Workstation Pro
Create the Sample Custom Networking Configuration
You can create the sample custom networking configuration.
Prerequisites
n
Familiarize yourself with how to create virtual machines and configure network devices in the host and
guest operating systems.
n
Familiarize yourself with the diagram of the sample networking configuration. See Figure 9-4.
Procedure
1
2
3
4
5
6
Use the New Virtual Machine wizard to create four virtual machines.
a
Create the first virtual machine with bridged networking so that it can connect to an external
network by using the host network adapter.
b
Create the other three virtual machines without networking.
Configure network settings for the first virtual machine.
a
Open the first virtual machine, but do not power it on.
b
Edit the virtual machine settings to add a second virtual network adapter.
c
Connect the second network adapter to VMnet2.
Configure network settings for the second virtual machine.
a
Open the virtual machine, but do not power it on.
b
Edit the virtual machine settings to add a virtual network adapter.
c
Connect the network adapter to VMnet2.
Configure network settings for the third virtual machine.
a
Open the virtual machine, but do not power it on.
b
Edit the virtual machine settings to add a virtual network adapter.
c
Connect the network adapter to VMnet2.
d
Edit the virtual machine settings to add a second virtual network adapter.
e
Connect the second network adapter to VMnet3.
Configure network settings for the fourth virtual machine.
a
Open the virtual machine, but do not power it on.
b
Edit the virtual machine settings to add a virtual network adapter.
c
Connect the network adapter to VMnet3.
Determine the network addresses that are used for VMnet2 and VMnet3.
Option
208
Description
Windows host
Use the ipconfig /all command.
Linux host
Use the ifconfig command.
7
Power on each virtual machine and install the appropriate guest operating system.
8
Use the virtual network editor to configure VMnet2 to use the virtual DHCP service to distribute IP
address to virtual machines.
VMware, Inc.
Chapter 9 Configuring Network Connections
9
10
VMware, Inc.
Configure the networking in each guest operating system.
Option
Description
Virtual machine 1
For the bridged network adapter in virtual machine 1, use the networking
settings needed for a connection to the external network. If the virtual
machine receives its IP address from a DHCP server on the external
network, the default settings should work. For the second network adapter
in virtual machine 1, manually assign an IP address in the range you are
using with VMnet2.
Virtual machine 2
Assign an IP address in the range you are using with VMnet2.
Virtual machine 3
Network adapters are connected to VMnet2 and VMnet3. Assign an IP
address in the virtual network's range it is connected to.
Virtual machine 4
Assign an IP address in the range you are using with VMnet3.
Install the necessary application software in each virtual machine.
209
Using VMware Workstation Pro
210
VMware, Inc.
Using Remote Connections and
Sharing Virtual Machines
10
A shared virtual machine is a virtual machine on the host system that remote Workstation Pro users can
access as a remote virtual machine. Up to 100 remote users can connect to a single shared virtual machine at
the same time.
You can configure Workstation Pro so that users on remote Workstation Pro hosts can interact with your
local host and use the shared virtual machines that are running on it. You can also connect to remote hosts
and run remote virtual machines. You control who can access host systems and shared virtual machines by
setting permissions.
This chapter includes the following topics:
n
“Understanding VMware Workstation Server,” on page 211
n
“Connect to a Remote Server,” on page 214
n
“Disconnect from a Remote Server,” on page 216
n
“Creating and Managing Shared Virtual Machines,” on page 216
n
“Uploading Virtual Machines to Remote Servers,” on page 219
n
“Download a Virtual Machine from a Remote Server,” on page 221
n
“Create a Virtual Machine on a Remote Host,” on page 222
n
“Configure Shared and Remote Virtual Machines to Start with the Host,” on page 223
n
“Using Roles to Assign Privileges,” on page 224
n
“Using Permissions to Restrict Users,” on page 227
Understanding VMware Workstation Server
VMware Workstation Server is a service that runs on the Workstation Pro host system. Remote
Workstation Pro users connect to VMware Workstation Server when they run shared virtual machines on
the host system.
On a Windows host, VMware Workstation Server is the VMware Workstation Server service. On a Linux
host, it is vmware-workstation-server.
When you install Workstation Pro, virtual machine sharing and remote access are enabled by default and
VMware Workstation Server starts when the host system starts. When Workstation Pro starts, it connects to
VMware Workstation Server by using the credentials of the currently logged in user.
Remote Workstation Pro users connect to VMware Workstation Server through HTTPS port 443 on the host
system. You can change the VMware Workstation Server port when you install Workstation Pro and after
Workstation Pro is installed by modifying the Shared VMs Workstation Pro preference.
VMware, Inc.
211
Using VMware Workstation Pro
Shared virtual machines appear under the Shared VMs item in the virtual machine library. If virtual
machine sharing is disabled, or if the current user does not have permissions to connect to VMware
Workstation Server, the Shared VMs item is inactive.
If you click the Shared VMs item when virtual machine sharing is disabled, Workstation Pro returns a
message that explains how to enable virtual machine sharing. If the Shared VMs item is inactive because the
current user does not have the proper permissions, a login dialog box appears and you can log in as a user
who can connect to VMware Workstation Server.
Configure Virtual Machine Sharing and Remote Access
You can enable or disable virtual machine sharing and remote access, change the HTTPS port that VMware
Workstation Server uses on the host system, and change the shared virtual machines directory.
When you enable virtual machine sharing and remote access, Workstation Pro starts VMware Workstation
Server and configures the service to start with the host system.
When you disable virtual machine sharing and remote access, Workstation Pro disables virtual machine
sharing and stops VMware Workstation Server. You cannot create shared virtual machines and remote users
cannot connect to the host system.
You must disable virtual machine sharing and remote access before you can change the HTTPS port that
VMware Workstation Server uses.
Prerequisites
n
On a Linux host, verify that you have root access.
n
On a Windows host, verify that you have administrative privileges.
n
If you plan to change the shared virtual machines directory, stop sharing virtual machines on the host
system. You cannot change the shared virtual machines directory if there are shared virtual machines
on the host system. See “Stop Sharing a Virtual Machine,” on page 219.
Procedure
1
Select Edit > Preferences > Shared VMs.
2
To enable or disable virtual machine sharing and remote access, click Enable Sharing or Disable
Sharing (Windows host), or select or deselect Enable virtual machine sharing and remote access
(Linux host).
3
To change the HTTPS port that VMware Workstation Server uses on the host system, select a different
port from the drop-down menu.
Note If you change the port to a non-default value, remote users must specify the port number when
they connect to the host system, for example, host:port.
212
4
To change the shared virtual machines directory, type or browse to the location of the new shared
virtual machines directory (Windows host), or type the new directory in the text box and click Apply
(Linux host).
5
Click OK to save your changes.
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
Replace the Default Certificate for VMware Workstation Server
VMware Workstation Server generates a self-signed certificate. This certificate is sufficient for encryption,
but it does not provide identity verification. For increased security, you should replace the default certificate
with a certificate that is signed by a commercial Certificate Authority (CA).
Prerequisites
Obtain a signed certificate. Obtaining a signed certificate involves creating a certificate signing request (CSR)
and sending it to a CA in accordance with the CA's enrollment process. After conducting some checks on
your company, the CA signs your request, encrypts it with a private key, and sends you a validated
certificate. See the instructions provided by the CA for more information.
Procedure
1
On the host system, replace the default certificate text in the VMware SSL certificate file with the
certificate text that you obtained from the CA.
The location of the certificate file depends on the host operating system.
2
Option
Certificate File
Windows Server 2008 R2, Windows
Server 2012 R2, Windows 7,
Windows 8, and Windows 10 hosts
C:\ProgramData\VMware\SSL\rui.crt
Note You can access the SSL directory only from an elevated command
prompt.
Linux hosts
/etc/vmware/ssl/rui.crt
On the host system, replace the default private key text in the VMware SSL key file with the private key
text that you obtained from the CA.
The location of the key file depends on the host operating system.
3
Option
Certificate File
Windows Server 2008 R2, Windows
Server 2012 R2, Windows 7,
Windows 8, and Windows 10 hosts
C:\ProgramData\VMware\SSL\rui.key
Note You can access the SSL directory only from an elevated command
prompt.
Linux hosts
/etc/vmware/ssl/rui.key
Restart the host system.
The VMware Workstation Server service restarts and begins using the new certificate.
Shared Virtual Machines Directory
Workstation Pro stores shared virtual machines in the shared virtual machines directory, where VMware
Workstation Server manages them.
The default location of the shared virtual machines directory depends on the host operating system.
Table 10‑1. Default Shared Virtual Machines Directory
Host Operating System
Default Shared Virtual Machines Directory
Windows Server 2008 R2, Windows Server
2012 R2
C:\Documents and Settings\All Users\Documents\Shared
Virtual Machines
Windows 7
Windows 8
Windows 10
C:\Users\Public\Documents\Shared Virtual Machines
Linux
/var/lib/vmware/Shared VMs
VMware, Inc.
213
Using VMware Workstation Pro
VMware Workstation Server Log Files
VMware Workstation Server saves messages in log files. Refer to these log files if you need to audit or
troubleshoot a problem with remote access or remote authorization.
Table 10‑2. Workstation Server Log Files
Host System
Location
Windows Server 2008 R2, Windows
Server 2012 R2, Windows 7,
Windows 8, and Windows 10 hosts
C:\ProgramData\VMware\hostd\hostd-n.log
Linux hosts
/var/log/vmware/hostd-n.log
On Linux hosts, security-related information, such as authorization attempts, is sent to the system messages
log.
Connect to a Remote Server
You can use Workstation Pro to connect to a remote server that is running Workstation Pro, ESX, ESXi, or
vCenter Server.
When you connect to a remote server for the first time, Workstation Pro asks you whether to save your login
information. You can configure Workstation Pro to never ask you to save login information for a remote
server. See “Disable the Prompt to Save Remote Login Information,” on page 215.
Prerequisites
Verify that the remote server is running Workstation 8.x or later, or ESX, ESXi, or vCenter Server 4.1 or later.
Procedure
1
Select File > Connect to Server.
2
Type the host name or IP address, your user name and password, and click Connect.
If the VMware Workstation Server service running on the remote server is not using the default port,
you must specify the port number, for example, remotehost:444. The VMware Workstation Server
service uses port 443 by default.
3
(Optional) If Workstation Pro asks you whether to save your login information, select an option.
Option
Description
Remember
Workstation Pro saves your login information so that you do not need to
provide it the next time you log in to the server.
Never for this Host
Workstation Pro saves the server name to an exceptions list and does not
prompt you to save your login information for this server again.
Not Now
Workstation Pro does not save your login information, but it prompts you
to save your login information the next time you connect to this server.
After you are connected to the remote server, the remote host and remote virtual machines appear in the
library.
What to do next
Interact with the remote host and remote virtual machines.
214
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
Interacting with Remote Hosts and Virtual Machines
After you connect to a remote server, the remote host and remote virtual machines appear in the library. If
the remote server is running vCenter Server, datacenters and folders appear in the library.
To interact with a remote host, you select it in the library. The tasks that you can perform on a remote host
appear on the tab for the remote host. For example, you might be able to restart, shut down, or suspend the
remote host and create virtual machines.
To interact with a remote virtual machine, you select it in the library. You interact with remote virtual
machines in the same way that you interact with local virtual machines, but some features and devices are
not supported. Features that you cannot use with remote virtual machines include Unity mode, shared
folders, AutoProtect snapshots, drag-and-drop, and copy and paste.
Your permissions determine the actions that you can perform on remote hosts and remote virtual machines.
When a feature is not supported, or when you do not have permission to use it, the associated menu item is
unavailable.
Disable the Prompt to Save Remote Login Information
You can disable the prompt to save remote login information for a specific remote server or for all remote
servers.
Procedure
n
Disable the prompt to save login information for a specific remote server.
a
Log in to the remote server for the first time.
b
Select Never for this Host.
Workstation Pro saves the name of the remote server to an exceptions list. You must type login
information the next time you connect to the remote server.
n
Disable the prompt to save login information for all remote servers.
a
Select Edit > Preference > Workspace.
b
Deselect Offer to save login information for remote hosts.
c
Click OK to save your changes.
You must type login information every time you connect to a remote server.
Remove Saved Login and Exception Information for Remote Servers
You can remove the login information that Workstation Pro saves for a remote server. You might need to
remove saved login information if the user name or password changes for a remote sever. You can also
remove a remote server from the exceptions list.
Workstation Pro adds a remote server to the exceptions list when you select Never for this Host the first
time you log in to the remote server. If you subsequently want Workstation Pro to prompt you to save login
information for that remote server, you must remove the remote server from the exceptions list.
VMware, Inc.
215
Using VMware Workstation Pro
Procedure
1
Select Edit > Preferences, select Workspace, and click Show Saved Login Information.
The Saved Passwords tab shows the saved user names. The remote servers for which Workstation Pro
does not prompt you to save login information appear on the Exceptions tab.
2
Option
Description
Remove saved login information for
a specific remote server
On the Saved Passwords tab, select the remote server and click Remove.
You must type login information the next time you connect to that remote
server.
Remove all saved login information
On the Saved Passwords tab, click Remove All. You must type login
information the next time you connect to any remote server.
Remove a remote server from the
exceptions list
On the Exceptions tab, select the remote server and click Remove.
Workstation Pro prompts you to save login information the next time you
connect to the remote server.
Remove all remote servers from the
exceptions list
On the Exceptions tab, click Remove All (Windows host) or Clear (Linux
host). Workstation Pro prompts you to save login information the next
time you connect to any remote server.
Click Close to close the dialog box and click OK to save your changes.
Disconnect from a Remote Server
When you disconnect from a remote server, the remote virtual machines no longer appear in the library.
Procedure
n
On a Windows host, right-click the remote host in the library and select Disconnect.
n
On a Linux host, select the remote host in the library and click Disconnect From This Server on the tab
for the remote host.
Creating and Managing Shared Virtual Machines
A shared virtual machine is a virtual machine on the host system that remote Workstation Pro users can
access as a remote virtual machine. You can create a new shared virtual machine, convert a standard virtual
machine to a shared virtual machine, or create a shared virtual machine clone of a standard virtual machine.
You can configure specific shared virtual machines to start when the host system starts, and you can view
status and task information for shared virtual machines.
Workstation Pro stores shared virtual machines in the shared virtual machines directory, where VMware
Workstation Server manages them. Shared virtual machines appear in the virtual machine library under the
Shared VMs item.
n
Convert or Clone a Standard Virtual Machine to a Shared Virtual Machine on page 217
You can convert a standard virtual machine to a shared virtual machine or create a shared virtual
machine by creating a clone of a standard virtual machine. Workstation Pro stores shared virtual
machines in the shared virtual machines directory.
n
Create a New Shared Virtual Machine on page 217
You can create a new shared virtual machine in Workstation Pro by using the New Virtual Machine
wizard. Creating a shared virtual machine is similar to creating a standard virtual machine.
n
Stop Sharing a Virtual Machine on page 219
When you stop sharing a virtual machine, Workstation Pro changes the shared virtual machine to a
standard virtual machine.
216
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
n
View the Status of Shared and Remote Virtual Machines on page 219
You can view power status and task information for shared virtual machines, and you can view the
power status of remote virtual machines. Tasks are operations that can affect the use of a virtual
machine, such as power state changes and changes to virtual machine settings.
Convert or Clone a Standard Virtual Machine to a Shared Virtual Machine
You can convert a standard virtual machine to a shared virtual machine or create a shared virtual machine
by creating a clone of a standard virtual machine. Workstation Pro stores shared virtual machines in the
shared virtual machines directory.
Prerequisites
n
Verify that the virtual machine is not encrypted.
n
Verify that the virtual machine is not configured to use a physical disk.
n
Power off the virtual machine.
Procedure
1
Select the virtual machine and select VM > Manage > Share, or drag the virtual machine to the Shared
VMs item.
2
Type a name for the shared virtual machine.
3
Select how to create the shared virtual machine.
4
Option
Description
Move the virtual machine
Convert the standard virtual machine to a shared virtual machine.
Workstation Pro moves the virtual machine files to the shared virtual
machines directory. If you decide to prevent remote access to virtual
machine at a later time, you can change the virtual machine back to a
standard virtual machine.
Make a full clone of the virtual
machine
Create a shared virtual machine by cloning the virtual machine.
Workstation Pro creates the clone in the shared virtual machines directory.
The clone is a complete and independent copy of the virtual machine and
additional disk space is required to store it.
Click Finish to share the virtual machine and click Close to exit the wizard.
A clone can take several minutes to create, depending on the size of the virtual disk that is being
duplicated.
If you converted a standard virtual machine to a shared virtual machine, the virtual machine appears under
the Shared VMs item in the library. If you cloned a standard virtual machine, the clone appears under the
Shared VMs item and the original virtual machine remains under My Computer.
What to do next
If the virtual machine uses a static IP address, change it after cloning a standard virtual machine to a shared
virtual machine.
Create a New Shared Virtual Machine
You can create a new shared virtual machine in Workstation Pro by using the New Virtual Machine wizard.
Creating a shared virtual machine is similar to creating a standard virtual machine.
Prerequisites
n
VMware, Inc.
Verify that you have the information the New Virtual Machine wizard requires to create a virtual
machine. See “Preparing to Create a New Virtual Machine,” on page 40.
217
Using VMware Workstation Pro
n
Verify that the guest operating system you plan to install is supported. See the VMware Compatibility
Guide on the VMware Web site for a list of the supported guest operating systems.
n
See the VMware Guest Operating System Installation Guide for information about the guest operating
system that you plan to install.
n
If you are installing the guest operating system from an installer disc, insert the installer disc in the CDROM drive in the host system.
n
If you are installing the guest operating system from an ISO image file, verify that the ISO image file is
in a directory that is accessible to the host system.
Procedure
1
In the library, select Shared VMs.
2
On the Shared VMs tab, click Create a New Virtual Machine.
3
On the Welcome screen, select the configuration type.
4
Option
Description
Typical
The wizard prompts you to specify or accept defaults for basic virtual
machine settings. The typical configuration type is appropriate in most
instances.
After specifying an operating system version and virtual machine name
and location, the wizard prompts you to configure only the virtual disk
size and whether the disk should be split into multiple files. If you choose
a custom setup, the wizard includes additional prompts for such things as
processors, memory, and networking.
Custom
You must select the custom configuration type to make a different virtual
machine version than the default hardware compatibility setting, specify
the I/O adapter type for SCSI adapters, specify whether to create an IDE,
SCSI, or SATA virtual disk, use an existing virtual disk, or allocate all
virtual disk space rather than let disk space gradually grow to the
maximum disk size.
If you selected a custom configuration, select the hardware compatibility setting for the virtual machine.
The hardware compatibility setting determines the hardware features of the virtual machine.
5
Follow the prompts to select a guest operating system and name and configure the virtual machine.
Use the following guidelines:
6
n
The Easy Install feature is not available for installing operating systems in shared or remote virtual
machines.
n
If you choose to install the operating system later, the virtual machine is created with a blank disk.
(Optional) Click Customize Hardware to customize the hardware configuration.
You can also modify virtual hardware settings after you create the virtual machine.
7
(Optional) Select Power on this virtual machine after creation to power on the virtual machine after
you create it.
This option is not available if you are installing the guest operating system manually.
8
Click Finish to create the virtual machine.
If you are using Easy Install, guest operating system installation begins when the virtual machine powers
on. The guest operating system installation is automated and typically runs without requiring any input
from you. After the guest operating system is installed, Easy Install installs VMware Tools.
Newly created shared virtual machines appear in the library under the Shared VMs item.
218
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
What to do next
If you used Easy Install and the virtual machine did not power on when you finished the New Virtual
Machine wizard, power on the virtual machine to start the guest operating system installation. See “Use
Easy Install to Install a Guest Operating System,” on page 51.
If you did not use Easy Install, install the guest operating system manually. See “Install a Guest Operating
System Manually,” on page 52.
Stop Sharing a Virtual Machine
When you stop sharing a virtual machine, Workstation Pro changes the shared virtual machine to a
standard virtual machine.
Prerequisites
Power off the virtual machine.
Procedure
1
Select the shared virtual machine and select VM > Manage > Stop Sharing, or drag the virtual machine
from under the Shared VMs item and drop it on My Computer.
2
Type or browse to the new location for the virtual machine.
3
Click Finish to stop sharing the virtual machine and click Close to exit the wizard.
The virtual machine no longer appears on the Shared VMs tab.
View the Status of Shared and Remote Virtual Machines
You can view power status and task information for shared virtual machines, and you can view the power
status of remote virtual machines. Tasks are operations that can affect the use of a virtual machine, such as
power state changes and changes to virtual machine settings.
Prerequisites
To view the power status of remote virtual machines, connect to the remote server. See “Connect to a
Remote Server,” on page 214.
Procedure
n
To view power status and task information for shared virtual machines, select Shared VMs and select
the list view on the Shared VMs tab.
Power status and task information appears on the Shared VMs tab for each shared virtual machine.
n
To view the power status of remote virtual machines, select the remote host and select the list view on
the tab for the remote host.
The power status of each virtual machine on the remote host appears on the tab.
Uploading Virtual Machines to Remote Servers
You can upload virtual machines created with Workstation Pro to remote servers running other VMware
products.
You can upload virtual machines to remote servers running VMware ESXi or VMware vCenter Server, or to
VMware vCloud Air OnDemand.
n
Upload a Virtual Machine to a Remote Server on page 220
When you upload a virtual machine to a remote server, Workstation Pro copies the virtual machine to
the remote host and datastore that you select. The original virtual machine remains on the host system.
VMware, Inc.
219
Using VMware Workstation Pro
n
Upload a Virtual Machine to VMware vCloud Air on page 221
®
®
When you upload a virtual machine to VMware vCloud Air™, Workstation Pro copies the virtual
machine to the VMware vCloud Air server and the virtual data center that you select. The original
virtual machine remains on the host system.
Upload a Virtual Machine to a Remote Server
When you upload a virtual machine to a remote server, Workstation Pro copies the virtual machine to the
remote host and datastore that you select. The original virtual machine remains on the host system.
Prerequisites
n
Verify that the remote server is running VMware Workstation Pro, VMware ESXi or VMware vCenter
Server..
n
Verify that the virtual machine is not encrypted. You cannot upload an encrypted virtual machine.
n
Verify that the remote host supports the hardware version of the virtual machine. If the remote host
does not support the hardware version, the upload wizard returns an error message.
n
Open the virtual machine in Workstation Pro.
n
If the virtual machine is powered on or suspended, power it off.
Procedure
1
Select the virtual machine and select VM > Manage > Upload.
Note You can also start the upload process by dragging and dropping the virtual machine to the
remote host in the library.
2
Select the destination remote server.
Option
Action
The remote server appears in the
list
Select the remote server in the list.
The remote server does not appear
in the list
Select New Server Connection and log in to the remote server.
Workstation Pro verifies the connection to the remote server.
3
If the remote server is running vCenter Server, select a destination location.
4
(Optional) Type a new name for the virtual machine on the remote host.
5
Select a remote host and datastore to store the uploaded virtual machine.
If the remote server is running vCenter Server, multiple hosts and datastores might be available.
6
Click Finish to upload the virtual machine to the remote server.
A status bar indicates the progress of the upload process. How long it takes to upload a virtual machine
depends on the size of the virtual disk and the network connection speed.
After the virtual machine is uploaded to the remote server, it appears in the inventory for the remote host in
the library.
220
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
Upload a Virtual Machine to VMware vCloud Air
®
®
When you upload a virtual machine to VMware vCloud Air™, Workstation Pro copies the virtual
machine to the VMware vCloud Air server and the virtual data center that you select. The original virtual
machine remains on the host system.
Prerequisites
n
Verify that the virtual machine is not encrypted. You cannot upload an encrypted virtual machine.
n
Verify that the remote host supports the hardware version of the virtual machine. If the remote host
does not support the hardware version, you receive an error message.
n
Verify that the virtual machine is turned off.
n
Verify that you have login credentials for VMware vCloud Air.
For more information about VMware vCloud Air, see the vCloud Air - Virtual Private Cloud OnDemand User's
Guide.
Procedure
1
Select a virtual machine to upload to VMware vCloud Air.
2
Select VM > Manage > Upload.
3
Select VMware vCloud Air and click Next.
4
Enter your user name and password for the server and click Next.
5
Type a new name for the virtual machine.
6
Select a virtual data center to store the uploaded virtual machine.
7
Click Finish to upload the virtual machine to the virtual data center.
Download a Virtual Machine from a Remote Server
When you download a virtual machine from a remote server, Workstation Pro copies the virtual machine
from the remote host and datastore. The original virtual machine remains on the host system, and a copy is
created on the Workstation Pro host in the location you specify.
This feature is available for virtual machines on remote servers. It is not available for shared virtual
machines or standard virtual machines on Workstation Pro hosts.
Prerequisites
n
Connect to the remote server that hosts the virtual machine you want to download. See “Connect to a
Remote Server,” on page 214.
n
Verify that the remote server is running ESX, ESXi, or vCenter Server 4.1 or later.
n
If the virtual machine is powered on or suspended, power it off.
Procedure
1
Select the virtual machine on the remote server and select VM > Manage > Download.
Note You can also start the download process by dragging the virtual machine from the remote host
into the My Computer portion of the Workstation Pro library or into any sub-folder of My Computer in
the library.
2
VMware, Inc.
In the Download Virtual Machine dialog box that appears, type a name for the virtual machine, type or
browse to the directory for the virtual machine files, and click Download.
221
Using VMware Workstation Pro
Create a Virtual Machine on a Remote Host
When you are connected to a remote server, you can create a remote virtual machine. Creating a remote
virtual machine is similar to creating a virtual machine on the local host, but Easy install is not supported
and you must install the guest operating system manually.
When you select a typical configuration, the New Virtual Machine wizard uses the default hardware version
configured in the Workstation Pro preferences, unless the remote host does not support that version. If the
remote host does not support the default hardware version, the wizard uses the latest hardware version that
is supported on the remote host.
Prerequisites
n
Connect to the remote server. See “Connect to a Remote Server,” on page 214.
n
Verify that you have permission to create a virtual machine on the remote host.
n
Verify that you have the information the New Virtual Machine wizard requires to create a virtual
machine. See “Preparing to Create a New Virtual Machine,” on page 40.
Procedure
1
2
Start the New Virtual Machine wizard.
Option
Description
Windows host
Select File > New Virtual Machine and select the remote host from the
menu, or click New Virtual Machine on the tab for the remote host.
Linux host
Click Create a New Virtual Machine on the tab for the remote host.
On the Welcome screen, select the configuration type.
Option
Description
Typical
The wizard prompts you to specify or accept defaults for basic virtual
machine settings. The typical configuration type is appropriate in most
instances.
After specifying an operating system version and virtual machine name
and location, the wizard prompts you to configure only the virtual disk
size and whether the disk should be split into multiple files. If you choose
a custom setup, the wizard includes additional prompts for such things as
processors, memory, and networking.
Custom
You must select the custom configuration type to make a different virtual
machine version than the default hardware compatibility setting, specify
the I/O adapter type for SCSI adapters, specify whether to create an IDE,
SCSI, or SATA virtual disk, use an existing virtual disk, or allocate all
virtual disk space rather than let disk space gradually grow to the
maximum disk size.
3
If the remote server running is ESX or ESXi and it has multiple datastores, select a datastore to store the
virtual machine.
4
If the remote server is running vCenter Server, select an inventory location, a remote host, and a
datastore to store the virtual machine.
The inventory location can be a datacenter or a folder within a datacenter. You must select a datastore
only if the remote host has multiple datastores.
5
If you selected a custom configuration, select the hardware compatibility setting for the virtual machine.
The hardware compatibility setting determines the hardware features of the virtual machine.
222
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
6
Select the guest operating system type and version, or select Other if the guest operating system is not
listed.
7
Type a name for the virtual machine.
8
Follow the prompts to select a guest operating system and name and configure the virtual machine.
Use the following guidelines:
9
n
The Easy Install feature is not available for installing operating systems in shared or remote virtual
machines.
n
If you choose to install the operating system later, the virtual machine is created with a blank disk.
Click Finish to create the virtual machine.
The virtual machine appears in the library under the remote host.
What to do next
Install the guest operating system manually. See “Install a Guest Operating System Manually,” on page 52.
Configure Shared and Remote Virtual Machines to Start with the Host
You can use the AutoStart feature to configure shared virtual machines to start when the local host system
starts. You can also configure remote virtual machines to start when the remote host system starts.
You cannot configure AutoStart if the remote server is running vCenter Server. You cannot use the AutoStart
feature to configure virtual machines to start in a preferred sequence. You can use the VMware vSphere
Client to configure more advanced features, including startup order. See the vSphere virtual machine
administration documentation.
Prerequisites
n
If you are configuring AutoStart for remote virtual machines, connect to the remote server. See
“Connect to a Remote Server,” on page 214.
n
Verify that you have the Administrator role or a custom role that contains the
Host.Configuration.Virtual machine autostart configuration privilege.
Procedure
1
Select the location of the virtual machines.
Option
Description
The virtual machines are on the
local host
a
b
In the library, select Shared VMs.
On the Shared VMs tab, click Manage Autostart VMs.
The virtual machines are on a
remote host
a
b
In the library, select the remote host.
On the tab for the remote host, Manage Autostart VMs.
2
Select the virtual machines to start with the host system.
3
If you selected multiple virtual machines, select the number of seconds to delay between starting the
virtual machines.
4
Click Save to save your changes.
VMware, Inc.
223
Using VMware Workstation Pro
Using Roles to Assign Privileges
A role is a predefined set of privileges. Privileges define individual rights that a user requires to perform
actions and read properties. Workstation Pro includes a default set of system roles. You can also create your
own roles.
A single user might have different roles for different objects. For example, if you have two shared virtual
machines, virtual machine A and virtual machine B, you might assign a particular user the Administrator
role on virtual machine A and the Read Only permission on virtual machine B.
n
Default System Roles on page 224
Workstation Pro provides a set of default system roles. You can use the default system roles to assign
permissions, or you can use them as a model to create your own roles.
n
Create a Role on page 225
If the default system roles do not meet your needs, you can combine selected privileges to create your
own roles.
n
Edit a Role on page 225
You can change the name of a role. You can add or remove the privileges in a role. You cannot edit the
default system roles.
n
Clone a Role on page 226
You can make a copy of an existing role by cloning it. When you clone a role, the new role is not
applied to users, groups, or objects. You must assign the role to users or groups and objects.
n
Remove a Role on page 227
When you remove a role, Workstation Pro removes the definition from the list of roles.
Default System Roles
Workstation Pro provides a set of default system roles. You can use the default system roles to assign
permissions, or you can use them as a model to create your own roles.
The default system roles are permanent. You cannot edit the privileges associated with these roles.
Table 10‑3. Default System Roles
Role
User Capabilities
Administrator
n
Has all privileges for all objects.
Can add, remove, and set access rights and privileges
on all objects.
Default role for members of the Administrators group on
Windows hosts and the root user on Linux hosts.
n
No Access
Cannot view or change the associated object.
Tabs associated with the object appear without content.
Except for users in the Administrators group on Windows
hosts and the root user on Linux hosts, this is the default
role for all users.
n
n
Read Only
n
n
224
Can view the object state and details about the object.
Cannot perform any actions through the menus and
toolbars.
VM Creator
Can create, use, configure, and delete virtual machines.
VM User
Can configure and use existing virtual machines.
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
Create a Role
If the default system roles do not meet your needs, you can combine selected privileges to create your own
roles.
Privileges define individual rights that a user requires to perform actions and read properties. The privileges
that you can select when you create a role depend on whether the server is running Workstation Pro, ESX,
ESXi, or vCenter Server.
See Defined Privileges in the Workstation Pro documentation center for descriptions of the available
privileges. The Workstation Pro documentation center is available on the VMware Web site at
https://www.vmware.com/support/pubs/ws_pubs.html.
Prerequisites
If you are creating a role on a remote host, connect to the remote server. See “Connect to a Remote Server,”
on page 214.
Procedure
1
Open the Edit Roles dialog box.
Option
Create a role on the local host
Description
n
n
Create a role on a remote host
n
n
2
Click Add.
3
Type a name for the new role.
4
(Windows host) Right-click Shared VMs and select Roles.
(Linux host) Right-click Shared VMs and select Edit Roles.
(Windows host) Right-click the remote host and select Roles.
(Linux host) Right-click the remote host and select Edit Roles.
Option
Description
Windows host
Replace the name of the role in the Roles list.
Linux host
Type a new name in the Name text box.
From the privileges tree, select the privileges to include in the new role.
You can expand the tree to view the privileges in each category.
5
Click OK (Windows host) or Save (Linux host) to create the new role.
Edit a Role
You can change the name of a role. You can add or remove the privileges in a role. You cannot edit the
default system roles.
When you change the privileges in a role, the changes are applied to any user or group that is assigned that
role. When you change the name of a role, no changes occur to the role's assignments.
See Defined Privileges in the Workstation Pro documentation center for descriptions of the available
privileges. The Workstation Pro documentation center is available on the VMware Web site at
https://www.vmware.com/support/pubs/ws_pubs.html.
Prerequisites
If you are editing a role on a remote host, connect to the remote server. See “Connect to a Remote Server,” on
page 214.
VMware, Inc.
225
Using VMware Workstation Pro
Procedure
1
Open the Edit Roles dialog box.
Option
Description
Edit a role on the local host
n
n
Edit a role on a remote host
n
n
2
(Windows host) Right-click the remote host and select Roles.
(Linux host) Right-click the remote host and select Edit Roles.
Select the role to edit.
Option
Description
Change the role name
n
n
Change the privileges in the role
3
(Windows host) Right-click Shared VMs and select Roles.
(Linux host) Right-click Shared VMs and select Edit Roles.
(Windows host) Double-click the role in the Roles list and type a new
name.
(Linux host) Type a new name in the Name text box.
Select or deselect privileges from the privileges tree. You can expand the
tree to view the privileges in each category.
Click OK (Windows host) or Save (Linux host) to save your changes.
Clone a Role
You can make a copy of an existing role by cloning it. When you clone a role, the new role is not applied to
users, groups, or objects. You must assign the role to users or groups and objects.
You can change the privileges in a cloned role during the cloning process. See Defined Privileges in the
Workstation Pro documentation center for descriptions of the available privileges. The Workstation Pro
documentation center is available on the VMware Web site at
https://www.vmware.com/support/pubs/ws_pubs.html.
Prerequisites
If you are cloning a role on a remote host, connect to the remote server. See “Connect to a Remote Server,”
on page 214.
Procedure
1
Open the Edit Roles dialog box.
Option
Clone a role on the local host
Description
n
n
Clone a role on a remote host
n
n
2
(Windows host) Right-click Shared VMs and select Roles.
(Linux host) Right-click Shared VMs and select Edit Roles.
(Windows host) Right-click the remote host and select Roles.
(Linux host) Right-click the remote host and select Edit Roles.
Select the role to clone and click Clone.
Workstation Pro adds a copy of the role to the list of roles.
3
226
Type a new name for the cloned role.
Option
Description
Windows host
Replace the name of the role in the Roles list.
Linux host
Type a new name in the Name text box.
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
4
(Optional) To change the privileges in the cloned role, select or deselect privileges from the privileges
tree.
You can expand the tree to view the privileges in each category.
5
Click OK (Windows host) or Save (Linux host) to create the new role.
Remove a Role
When you remove a role, Workstation Pro removes the definition from the list of roles.
Important Make sure that you understand how users will be affected before you remove or replace role
assignments.
Prerequisites
If you are removing a role on a remote host, connect to the remote server. See “Connect to a Remote Server,”
on page 214.
Procedure
1
Open the Edit Roles dialog box.
Option
Remove a role on the local host
Description
n
n
Remove a role on a remote host
n
n
2
(Windows host) Right-click Shared VMs and select Roles.
(Linux host) Right-click Shared VMs and select Edit Roles.
(Windows host) Right-click the remote host and select Roles.
(Linux host) Right-click the remote host and select Edit Roles.
Select the role to remove and click Remove.
On a Windows host, Workstation Pro removes configured user or group and role pairings on the host.
Users or groups that do not have other permissions assigned lose all privileges.
3
If the role is assigned to a user or group, select a reassignment option and click OK.
Option
Description
Remove the role from all affected
users and groups
(Windows host) Select Remove role assignments.
(Linux host) Select Remove affected permissions.
Users or groups that do not have other permissions assigned lose all
privileges.
Remove the role and assign another
role to all affected users and groups
n
n
n
n
(Windows host) Select Reassign affected users to and select a role.
(Linux host) Select Reassign affected permissions to and select a role.
Using Permissions to Restrict Users
You can control which users can access remote hosts and shared virtual machines by creating permissions.
To create a permission, you pair a user or group with a role and associate that pairing with an object. The
role defines the actions that a user or group can perform, the user or group indicates who can perform the
actions, and the object is the target of the actions.
A role is a predefined set of privileges. Privileges define individual rights that a user requires to perform
actions and read properties. A single user can have different roles for different objects.
VMware, Inc.
227
Using VMware Workstation Pro
Users can inherit permissions through group membership and through the object hierarchy. When you
assign permissions to a group, all of the users in the group inherit those permissions. If you define multiple
group permissions on the same object and a user belongs to two or more of those groups, the user inherits
all of the privileges assigned to the groups. If you define a permission for the user on the object, that
permission takes precedence over all group permissions.
Add a Permission
To create a permission, you assign a user or group and a role to an object.
The available users and groups include local users and groups on the host system. For Workstation Pro,
users and groups in the Windows domain that the host system belongs to are also included. For remote
hosts that vCenter Server manages, users and groups in the Windows domain list that vCenter Server
references are also included.
The object of a permission can be a shared or remote virtual machine, the Shared VMs item, or a remote
host. For remote hosts that vCenter Server manages, you can also set permissions on datacenters and folders
within datacenters.
When you add a permission, you can indicate whether the permission propagates down the object
hierarchy. Propagation is not universally applied. Permissions that you define for a child object always
override the permissions that propagate from parent objects.
Note You cannot use Workstation Pro to create, remove, or modify users and groups. To manage users and
groups, use the mechanisms that the host operating system provides.
Prerequisites
n
Verify that you know the default roles. See “Default System Roles,” on page 224.
n
If you are setting a permission on a remote object, connect to the remote server. See “Connect to a
Remote Server,” on page 214.
Procedure
1
Open the Permissions dialog box.
Option
Description
If the object is a shared or remote
virtual machine
Right-click the object and select Manage > Permissions.
If the object is a remote host,
datacenter, or folder
Right-click the object and select Permissions.
2
Click Add.
3
Select the location of the user or group from the Domain drop-down menu.
If you select (server), only local users and groups appear in the list.
4
Select the name of the user or group from the list.
You can type a name in the search box to filter the users and groups in the list.
5
228
Add the permission.
Option
Description
Windows host
Click Add, select the user or group, select a role from the drop-down menu
under Assigned Role, and click OK.
Linux host
Select a role from the Role drop-down menu and click Add.
VMware, Inc.
Chapter 10 Using Remote Connections and Sharing Virtual Machines
On a Linux host, the permission is added immediately. On a Windows host, the permission is not added
until you click OK.
6
(Optional) If you do not want to propagate the permission to child objects, deselect the Propagate check
box next to the new permission.
If the object is a shared or remote virtual machine and you deselect the Propagate check box, you must
confirm that the user can have read-only access to the host. Users must have read-only access to the host
on which a virtual machine is running to access the virtual machine through Workstation Pro.
The propagation setting takes effect immediately.
7
(Windows host only) Click OK to add the permission.
Edit a Permission
You can change the role that is paired with a user or group. You can also change the propagation setting.
Prerequisites
n
Verify that you know the default roles. See “Default System Roles,” on page 224.
n
If you are editing a permission on a remote object, connect to the remote server. See “Connect to a
Remote Server,” on page 214.
Procedure
1
Open the Permissions dialog box.
Option
Description
If the object is a shared or remote
virtual machine
Right-click the object and select Manage > Permissions.
If the object is a remote host,
datacenter, or folder
Right-click the object and select Permissions.
2
Select the permission.
3
Select a new role from the drop-down menu.
On a Windows host, the drop-down menu is under Assigned Role.
On a Linux host, the role is changed immediately. On a Windows host, the role is not changed until you
click OK.
4
To change the propagation setting, select or deselect the Propagate check box.
The propagation setting change takes effect immediately.
5
(Windows host only) Click OK to save your changes.
Remove a Permission
You can remove the user or group and role pair for a selected object. You cannot remove an inherited
permission.
Removing a permission does not remove the user or group from the list of available users and groups, nor
does it remove the role from the list of available roles.
Prerequisites
If you are removing a permission on a remote object, connect to the remote server. See “Connect to a Remote
Server,” on page 214.
VMware, Inc.
229
Using VMware Workstation Pro
Procedure
1
2
Open the Permissions dialog box.
Option
Description
If the object is a shared or remote
virtual machine
Right-click the object and select Manage > Permissions.
If the object is a remote host,
datacenter, or folder
Right-click the object and select Permissions.
Select the permission and click Remove.
On a Linux host, the permission is removed immediately. On a Windows host, the permission is not
removed until you click OK.
3
230
(Windows host only) Click OK to remove the permission.
VMware, Inc.
Changing Workstation Pro
Preference Settings
11
Workstation Pro preference settings are global configuration settings that apply to Workstation Pro and the
virtual machines that you run in Workstation Pro. You can override certain Workstation Pro preference
settings for specific virtual machines.
To change Workstation Pro preference settings, select Edit > Preferences.
Important The default settings for Workstation Pro preferences are correct for most cases. Do not change
Workstation Pro preference settings unless you are an experienced user.
This chapter includes the following topics:
n
“Configuring Workspace Preference Settings,” on page 231
n
“Configuring Input Preference Settings,” on page 234
n
“Changing Hot-Key Combinations,” on page 236
n
“Configuring Workstation Pro Display Preference Settings,” on page 236
n
“Configuring Software Update Preference Settings,” on page 238
n
“Sending System Data and Usage Statistics to VMware,” on page 240
n
“Changing Shared Virtual Machine Preference Settings,” on page 241
n
“Configuring Workstation Pro Memory Preference Settings,” on page 242
n
“Configuring Workstation Pro Priority Preference Settings,” on page 243
n
“Configuring Device Settings for Windows Hosts,” on page 244
Configuring Workspace Preference Settings
You can use workspace preference settings to change the default hardware compatibility setting for newly
created virtual machines, control how virtual machines behave when you exit Workstation Pro, and
configure general workspace settings.
To configure workspace preference settings, select Edit > Preferences > Workspace.
n
Configuring the Default Locations for Virtual Machine Files and Screenshots on page 232
You can configure the default locations for virtual machine files and captured screenshots.
n
Configuring Virtual Machine Exit Behavior on page 232
You can configure how virtual machines behave when you exit Workstation Pro.
VMware, Inc.
231
Using VMware Workstation Pro
n
Enabling Shared Folders Created By Other Users on page 233
As a security precaution, a shared folder is disabled by default if it was not created by the user who
powers on the virtual machine. Folder sharing is also disabled by default for Workstation 5.x virtual
machines, regardless of who created the virtual machine.
n
Changing the Default Hardware Compatibility Setting on page 233
You can change the hardware compatibility setting that the New Virtual Machine wizard uses when it
creates a typical virtual machine. The hardware compatibility setting determines the hardware
features that are supported in the virtual machine.
n
Configuring Power On Delay and Aero Peek Thumbnail Settings on page 234
You can configure the number of seconds that Workstation Pro delays between powering on virtual
machines when you perform a batch power operation. You can also specify whether to show Aero
Peek thumbnails on open virtual machine tabs.
n
Changing the Remote Server Login Privacy Setting on page 234
You can change the setting to enable or disable a prompt to save your login information when
connecting to a remote server.
Configuring the Default Locations for Virtual Machine Files and Screenshots
You can configure the default locations for virtual machine files and captured screenshots.
To configure the default locations for virtual machine files and screenshots, select Edit > Preferences >
Workspace.
Table 11‑1. Virtual Machine File and Screenshot Location Settings
Setting
Description
Default location for virtual machines
The default location for storing virtual machine files. This
path appears in the Location text box in the New Virtual
Machine wizard and the Clone Virtual Machine wizard. It
applies to virtual machines that the currently logged in
user creates.
Save screenshots to
Select whether to save virtual machine screenshots to the
clipboard, to a file, or to both.
When saving a screenshot to a file, you can have
Workstation Pro:
n Aways ask for location
n Save to desktop
n Browse for custom location
By default, Workstation Pro saves screenshots to .png files
on the Desktop of the host computer. To save screenshots
to .bmp files on Windows hosts, select Always ask for
location and specify the file type when you create the
screenshot.
Configuring Virtual Machine Exit Behavior
You can configure how virtual machines behave when you exit Workstation Pro.
To configure virtual machine exit behavior, select Edit > Preferences > Workspace.
232
VMware, Inc.
Chapter 11 Changing Workstation Pro Preference Settings
Table 11‑2. Virtual Machine Exit Behavior Settings
Setting
Description
Remember opened tabs between sessions
The virtual machine tabs that appear when you exit
Workstation Pro appear the next time you start
Workstation Pro.
If a tab for a virtual machine appears in the
Workstation Pro window, the virtual machine is considered
open even if it is not powered on.
Keep VMs running after Workstation closes
Powered-on virtual machines remain running in the
background when you close them or exit Workstation Pro.
If you deselect this setting, Workstation Pro prompts you
for the action to take each time you close a powered-on
virtual machine or exit Workstation Pro.
If a powered-on virtual machine continues running after
you close it or exit Workstation Pro, you can interact with it
through VNC or another service.
Show tray icon
If you run virtual machines in the background, use this
setting to select how the tray icon appears. The tray icon is
represented by three overlapping squares in the
notification area in the taskbar on the host system.
Always
The tray icon appears in the taskbar
when no virtual machines are running,
even if Workstation Pro is not running.
When a
virtual
machine is
powered on
The tray icon appears in the taskbar
only when a virtual machine is
powered on.
Never
The tray icon does not appear in the
taskbar when a virtual machine is
running, even if you restart
Workstation Pro.
Enabling Shared Folders Created By Other Users
As a security precaution, a shared folder is disabled by default if it was not created by the user who powers
on the virtual machine. Folder sharing is also disabled by default for Workstation 5.x virtual machines,
regardless of who created the virtual machine.
To enable shared folders that were created by other users, select Edit > Preferences > Workstation and select
Enable all shared folders by default.
After this setting is enabled, you can specify which virtual machines can share folders and which folders can
be shared.
Important Enabling all shared folders can pose a security risk because a shared folder might enable
existing programs inside the virtual machine to access the host file system without your knowledge.
Changing the Default Hardware Compatibility Setting
You can change the hardware compatibility setting that the New Virtual Machine wizard uses when it
creates a typical virtual machine. The hardware compatibility setting determines the hardware features that
are supported in the virtual machine.
To change the default hardware compatibility setting, select Edit > Preferences > Workspace. The default
hardware compatibility setting appears in the Default hardware compatibility menu.
VMware, Inc.
233
Using VMware Workstation Pro
By default, the default hardware compatibility setting is the Workstation Pro version that is installed on the
host system.
If you plan to create virtual machines and deploy them in environments that use other VMware products,
you might need to change the default hardware compatibility setting to an earlier Workstation version.
Some products do not support all of the hardware features in the installed Workstation Pro version. If the
virtual machine must be ESX server compatible, you can select the check box for ESX server compatibility on
the Workspace preferences dialog box.
Note The check box for ESX server compatibility is not available when you create a virtual machine on a
remote ESX host. Virtual machines created on remote ESX hosts are always ESX compatible.
See the Virtual Machine Mobility Planning Guide for information about virtual hardware versions. This guide
lists compatibility problems to consider when you move virtual machines into different environments.
Note If you create a custom virtual machine in the New Virtual Machine wizard, you can override the
default hardware compatibility setting.
Configuring Power On Delay and Aero Peek Thumbnail Settings
You can configure the number of seconds that Workstation Pro delays between powering on virtual
machines when you perform a batch power operation. You can also specify whether to show Aero Peek
thumbnails on open virtual machine tabs.
To configure power on delay and thumbnail settings, select Edit > Preferences > Workspace.
Table 11‑3. Power On Delay and Thumbnail Settings
Setting
Description
Seconds between powering on multiple VMs
Select the number of seconds that Workstation Pro delays
between starting virtual machines when you perform a
batch power operation. You can perform a batch power
operation on virtual machines in a folder by selecting the
folder or by selecting thumbnails on the folder tab.
Show Aero Peek thumbnails for open tabs
Select whether to show Aero Peek thumbnails on open
virtual machine tabs.
This check box is available on Windows 7 version 6.1 and
later host operating systems only.
Changing the Remote Server Login Privacy Setting
You can change the setting to enable or disable a prompt to save your login information when connecting to
a remote server.
By default, when you connect to a remote server you are prompted whether you want Workstation Pro to
save your login and password information. You can disable this prompt from displaying by deselecting the
Offer to Save Login Information for Remote Hosts checkbox. For more information, see “Connect to a
Remote Server,” on page 214.
Configuring Input Preference Settings
To direct input to a virtual machine, Workstation Pro captures input from the host system so that all
keystrokes, mouse moves, and button clicks go to the virtual machine. You can use input preference settings
to configure how Workstation Pro captures input from the host system.
To configure input preference settings, select Edit > Preferences > Input.
234
VMware, Inc.
Chapter 11 Changing Workstation Pro Preference Settings
n
Configuring Keyboard and Mouse Settings on page 235
Keyboard and mouse settings control how virtual machines that run in Workstation Pro capture input
from the keyboard and mouse.
n
Configuring Cursor Settings on page 235
Cursor settings control cursor behavior for the virtual machines that you run in Workstation Pro.
Configuring Keyboard and Mouse Settings
Keyboard and mouse settings control how virtual machines that run in Workstation Pro capture input from
the keyboard and mouse.
To configure keyboard and mouse settings, select Edit > Preferences > Input.
Table 11‑4. Keyboard and Mouse Settings
Setting
Description
Grab keyboard and mouse input on mouse
click
Virtual machines grab input the first time you click in the virtual
machine window.
Grab keyboard and mouse input on key press
Virtual machines grab keyboard and mouse input the first time you
press a key when the cursor is in the virtual machine window.
When this setting is selected, you cannot use the normal application
and system accelerator key sequences when the virtual machine display
is active.
Troubleshooting Input Problems
You might occasionally encounter problems when virtual machines capture input from the keyboard and
mouse on the host system.
Table 11‑5. Common Input Problems and Solutions
Problem
Solution
Pressing Ctrl+Alt to release the mouse and
keyboard causes a laptop to suspend.
By default, Workstation Pro uses Ctrl+Alt to release the mouse and
keyboard. Some laptops use this same key combination to suspend
the host machine. In these cases, try using Ctrl and Alt on the right
side of the keyboard. Workstation Pro recognizes both sets of Ctrl
and Alt keys, but laptops usually recognize only the keys on the left
side of the keyboard for the suspend function.
After you press Ctrl+Alt to release the mouse and
keyboard, the keyboard does not function properly
within the host operating system.
Occasionally, Workstation Pro causes the host operating system to
lose keyboard events, which in turn causes the host operating
system to detect that keys are being pressed when they are not.
If keys do not respond as expected after you exit Workstation Pro,
they might be stuck in the host operating system. Press and release
each of the modifier keys individually, including Ctrl, Shift, and
Alt. If the keys still do not respond, press and release more special
keys, including the Windows, Esc, and Caps Lock keys.
On Linux hosts, pressing Ctrl+Alt does not release
the cursor.
The modifier keys might be mapped under X (in Linux) in
unexpected ways. For example, the left Ctrl key might be mapped
to Caps Lock, or an Alt key is generating special keystrokes. Run
xmodmap -- kim -- kp and submit a support request to VMware
technical support that includes the output.
Configuring Cursor Settings
Cursor settings control cursor behavior for the virtual machines that you run in Workstation Pro.
To configure cursor settings, select Edit > Preferences > Input.
VMware, Inc.
235
Using VMware Workstation Pro
Table 11‑6. Cursor Settings
Setting
Description
Automatically grab and ungrab the mouse
Virtual machines release the cursor when you point outside of the
virtual machine window. When this setting is selected, you can use
the host system without first pressing a key combination.
You might need to deselect this setting if you play computer games
that pan or scroll when you move the pointer to the edge of the
screen.
VMware Tools must be installed in the virtual machine to use this
feature.
Hide cursor on ungrab
The cursor does not appear in the virtual machine display after input
is transferred back to the host system. If you have multiple virtual
machines open at the same time, selecting this setting helps you track
the active cursor.
VMware Tools must be installed in the virtual machine to use this
feature.
Optimize mouse for games
Select mouse behavior for computer games. In some computer games,
you move the pointer to the edge of the screen to pan the scene or
scroll. By optimizing the virtual mouse for games, you can achieve
this effect in a virtual machine.
Automatic
Workstation Pro determines when to optimize
mouse motion. This is the default setting.
Always
Mouse motion is always optimized for games.
Never
Mouse motion is never optimized. When you
play computer games in a virtual machine, the
optimized mouse is usually not released from
the virtual machine. Some applications, such as
AutoCAD, are incorrectly identified as games.
Select this setting if you use AutoCAD and find
that the mouse cannot pass freely from the
virtual machine to the host system or if pointer
speed is different when you use AutoCAD.
Changing Hot-Key Combinations
Hot-keys, which are also called keyboard shortcuts, provide a quick way to perform common virtual
machine operations. Hot-key settings are usually a combination of the Ctrl, Shift, Alt, and Windows keys.
n
You can change the hot-key combinations that you use to perform common virtual machine operations.
See “Change Hot-Key Combinations for Common Operations,” on page 166.
n
You can change the hot-key combination that you use to access the Start and Applications menus in
Unity mode. See “Change Hot-Key Combinations for Unity Mode,” on page 167.
Configuring Workstation Pro Display Preference Settings
Display adjustments occur when you resize the Workstation Pro window and when you change the display
settings inside the guest operating system. You can use display preference settings to configure how
Workstation Pro makes display adjustments.
To configure display preference settings, select Edit > Preferences > Display.
If you are using Windows 8.1 (Update 2) or Windows 10, Workstation Pro detects the DPI on each monitor
and scales the virtual machine to match the DPI on the host.
n
Configuring Autofit Settings on page 237
Autofit settings control how the display of virtual machines adjusts to fit the Workstation Pro window.
236
VMware, Inc.
Chapter 11 Changing Workstation Pro Preference Settings
n
Configuring Full Screen Settings on page 237
Full screen settings control how the host system and guest operating system display settings interact
when you enter full screen mode. In full screen mode, the virtual machine display fills the screen and
you cannot see the borders of the Workstation Pro window.
n
Configuring Menu and Toolbar Settings on page 237
Menu and toolbar settings control how the menus and toolbars appear when Workstation Pro is in full
screen and windowed mode.
Configuring Autofit Settings
Autofit settings control how the display of virtual machines adjusts to fit the Workstation Pro window.
To configure autofit settings, select Edit > Preferences > Display.
Table 11‑7. Autofit Settings
Setting
Description
Autofit window
Resize the application window to match the virtual machine display settings
when the virtual machine display settings are changed.
Autofit guest
Change the virtual machine settings to match the application window when
the application window is resized.
Configuring Full Screen Settings
Full screen settings control how the host system and guest operating system display settings interact when
you enter full screen mode. In full screen mode, the virtual machine display fills the screen and you cannot
see the borders of the Workstation Pro window.
To configure full screen settings, select Edit > Preferences > Display.
Table 11‑8. Full Screen Settings
Setting
Description
Autofit guest
Change the virtual machine settings to match the application window when
the application window is resized.
Stretch guest (no resolution change)
Virtual machine resolution settings are retained, but the display still changes
to fill the full screen. Select this setting if you need to retain low-resolution
settings, for example, when playing older computer games that run only at
low resolutions.
Center guest (no resolution change)
The host system and virtual machines retain their own display settings when
you are in full screen mode.
Configuring Menu and Toolbar Settings
Menu and toolbar settings control how the menus and toolbars appear when Workstation Pro is in full
screen and windowed mode.
To configure menu and toolbar settings, select Edit > Preferences > Display.
VMware, Inc.
237
Using VMware Workstation Pro
Table 11‑9. Menu and Toolbar Settings
Setting
Description
Use a single button for power controls
(Windows hosts only) When this setting is selected, the
start, stop, suspend, and reset power controls appear on the
toolbar as a single button with a drop-down menu. When
this setting is deselected, each power control has a separate
button on the toolbar.
Combine toolbar with menu bar in windowed mode
Show the Workstation Pro menus and toolbar on a single
bar when Workstation Pro is in windowed mode.
Combine tabs with toolbar in full screen
Show the tabs and toolbar in a single bar when
Workstation Pro is in full screen mode.
Show toolbar edge when unpinned in full screen
Show the edge of the full screen toolbar. When this setting
is deselected, the edge of the full screen toolbar is not
visible. The full screen toolbar appears for a few seconds
when you place your cursor near the top of the screen.
Configuring Software Update Preference Settings
You can use software update preference settings to configure when Workstation Pro checks for the
availability of new versions of software components and VMware Tools updates. You can also configure a
proxy server to connect to the VMware Update Server.
To configure software update preference settings, select Edit > Preferences > Updates.
n
Configuring Software Updates Settings on page 238
Software updates settings control when Workstation Pro downloads software updates to the host
system and whether it uses a proxy server to connect to the VMware Update Server.
n
Configuring Connection Settings for a Proxy Server on page 239
You can configure connection settings to use a proxy server to connect to the VMware Update Server.
Configuring Software Updates Settings
Software updates settings control when Workstation Pro downloads software updates to the host system
and whether it uses a proxy server to connect to the VMware Update Server.
Table 11‑10. Software Update Preference Settings
238
Setting
Description
Check for product updates on startup
Check for new versions of the application and installed components
when you start Workstation Pro. This setting is selected by default.
Check for new software components as needed
Check for a new version of a component when a component, such as
VMware Tools, is required. When this setting is selected,
Workstation Pro verifies if a new version is available to download
and install.
Download All Components Now
Manually download all of the available software components to the
host system. Click this button if you are planning to use a virtual
machine at a later time when you do not have access to the Internet.
Connection Settings
Click this button to configure a proxy server to connect to the
VMware Update Server.
Automatically update VMware Tools on virtual
machine
Install the latest version of VMware Tools when you power on a
virtual machine or shut down the guest operating system.
You can override this setting for specific virtual machines.
VMware, Inc.
Chapter 11 Changing Workstation Pro Preference Settings
Understanding the Automatic Software Update Process
When you enable automatic software updates, you are always aware of the latest releases from VMware.
By keeping your software up-to-date, you can take advantage of new product features and performance
improvements, ensure that your system includes the latest patches, and obtain timely support for new guest
operating systems. You can enable the automatic software update feature when you install Workstation Pro
or by configuring Workstation Pro preference settings. You can disable the feature at any time.
To determine if software updates are available, the VMware software updates feature securely sends the
following anonymous information to VMware.
n
A universal unique identifier (UUID), which it uses to identify each individual system
n
The product name, the product version, and the build number
n
Your host operating system name, version, and the locale setting
The VMware software updates feature does not collect any personal data, such as your name, address,
telephone number, or mail address. Your product license key and MAC address are not sent to VMware,
and VMware does not store your IP address with the data that it receives from you.
VMware might use the information it receives from the software update feature for product planning
purposes. VMware limits access to your data and uses industry-standard controls to protect your
information, including physical access controls, Internet firewalls, intrusion detection, and network
monitoring.
The information collected by the VMware software updates feature is handled in accordance with VMware
Privacy Policy.
Configuring Connection Settings for a Proxy Server
You can configure connection settings to use a proxy server to connect to the VMware Update Server.
To configure proxy connection settings, select Edit > Preferences > Updates and click Connection Settings.
Table 11‑11. Connection Settings
Setting
Description
No proxy
Do not use a proxy server.
Windows proxy settings
(Windows hosts only) Workstation Pro uses the host proxy settings from the
Connections tab in the Internet Options control panel to access the VMware Update
Server.
Click Internet Options to set the guest connection options.
System proxy settings
(Linux hosts only) Workstation Pro uses the host proxy settings to access the VMware
Update Server.
Manual proxy settings
Select an HTTP or SOCKS proxy, specify the proxy server address, and designate a
port number to access the VMware Update Server.
Username and Password
The username and password to use for proxy server authentication. On Windows
hosts, if either the Username or Password text box is blank, Workstation Pro does not
use either value. On Linux hosts, if either the Username or Password text box is
blank, Workstation Pro uses the username and password set in the gnome settings.
You must restart Workstation Pro for proxy setting changes to take effect.
VMware, Inc.
239
Using VMware Workstation Pro
Sending System Data and Usage Statistics to VMware
You can use the Workstation Pro feedback preference setting to control whether you participate in or opt out
of the VMware User Experience Improvement Program.
To configure the feedback preference setting, select Edit > Preferences > Feedback. The Help improve
VMware Workstation setting controls whether you participate in the Customer Experience Improvement
Program.
When you participate in the VMware User Experience Improvement Program, Workstation Pro collects and
sends anonymous system data and usage statistics to VMware. Workstation Pro creates log files for the
collected data and stores the data on the host system.
Table 11‑12. User Experience Improvement Program Log Files
Filename
Host
Operating
System
Log File Location
Description
workstationUploade
dData.log
Windows
Server 2008 R2
Windows
Server 2012 R2
Windows 7
Windows 8
Windows 10
\Users\ user \AppData\Local\VMware
The most recent data uploaded
to the VMware server.
workstationUploade
dData.log
Linux
~/.vmware
The most recent data uploaded
to the VMware server.
Note The data collection process does not affect the performance of your computer.
Participating in the User Experience Improvement Program
When you participate in the VMware User Experience Improvement Program, your computer sends
anonymous information to VMware. Participation in the program is voluntary and you can opt out at any
time.
Types of Data Collected
The data collected by the VMware User Experience Improvement Program might include product data,
product usage information, product performance information, and system configuration information.
Product data typically includes information such as the product name, version, build number, and
configuration settings. This information helps VMware compare data from identical installations and
determine popular configurations.
Product usage information might include menu items selected, toolbar buttons pressed, virtual machines
run, and virtual machine configuration settings. This information helps VMware identify usage patterns,
such as the most popular features, how many virtual machines users create, how many virtual machines are
run concurrently, which operating systems are the most popular, and what virtual machine settings are
typically selected.
Product performance data might include errors that occur and measurements, such as virtual machine
suspend and resume times, uptime, or application startup time.
240
VMware, Inc.
Chapter 11 Changing Workstation Pro Preference Settings
System configuration information might include the operating system that your computer is currently
running, how many processors are in your computer and the processor models, how much memory is
installed, how many network connections are available, the video cards and video drivers that are installed,
and screen resolutions for display devices. This information helps VMware identify the system
configurations that best match customer environments during testing and to plan future development based
on hardware industry trends and the adoption of new technologies.
Not all of the available information is collected from every system every time data is sent to VMware. Some
information is included only from select installations and certain information, such as error messages, is
collected only when it is generated.
VMware uses a universal unique identifier (UUID) to identify information from different machines.
When the Data Is Transmitted to VMware
Data is typically collected on your system and transmitted to VMware when you start Workstation Pro. If
your computer does not have access to the Internet, the information is collected and sent to VMware the
next time you start Workstation Pro. Data might also be sent to VMware at other times, such as during a
check for software updates. Data is encrypted and transmitted over a secure SSL connection so that it cannot
be read by other Internet users.
Workstation Pro stores all of the information that it sends to VMware on your system in clear text. The files
are located in the same directory as your log files and are named productnameUploadedData.log.
Privacy Protection
VMware does not collect any personal data, such as your name, address, telephone number, or mail address.
Your product license key and MAC address are not sent to VMware, and VMware does not store your IP
address with the data that it receives from you.
VMware limits access to your data and uses industry-standard controls to protect your information,
including physical access controls, Internet firewalls, intrusion detection, and network monitoring. The
information collected by the VMware User Experience Improvement Program is handled in accordance with
VMware Privacy Policy.
Note The User Improvement Program is not Spyware. Spyware collects information or acts on your
computer without your full knowledge or consent.
Opting Out of the Program
You can join or end participation in the VMware User Experience Improvement Program at any time by
changing Workstation Pro preference settings.
See “Sending System Data and Usage Statistics to VMware,” on page 240 for more information.
Changing Shared Virtual Machine Preference Settings
You can enable or disable virtual machine sharing and remote access, modify the HTTPS port that VMware
Workstation Server uses, and change the shared virtual machines directory.
To change shared virtual machine preference settings, select Edit > Preferences > Shared VMs.
To change these settings on a Windows host, you must have administrative privileges on the host system.
On a Linux host, you must have root access on the host system.
VMware, Inc.
241
Using VMware Workstation Pro
Table 11‑13. Shared Virtual Machine Preference Settings
Setting
Description
Enable Sharing or Disable Sharing (Windows host)
Enable virtual machine sharing and remote access (Linux
host)
When you enable virtual machine sharing, Workstation Pro
starts VMware Workstation Server on the host system. You
can create shared virtual machines and remote users can
connect to the host system.
When you disable virtual machine sharing,
Workstation Pro stops VMware Workstation Server on the
host system. You cannot create shared virtual machines
and remote users cannot connect to the host system.
Virtual machine sharing is enabled by default.
HTTPS port
The HTTPS port that VMware Workstation Server uses on
the host system. The default HTTPS port is 443.
On Windows hosts, you cannot change the HTTPS port
unless remote access and virtual machine sharing are
disabled.
On Linux hosts, you cannot change the port number in the
Preferences dialog box. You can change the port number
only during installation, when running the
Workstation Pro installation wizard.
Note If the port number uses a non-default value, remote
users must specify the port number when they connect to
the host system, for example, host:port.
Shared VMs location
The directory where Workstation Pro stores shared virtual
machines.
You cannot change the shared virtual machines directory if
there are shared virtual machines on the host.
Configuring Workstation Pro Memory Preference Settings
You can use memory preference settings to configure the amount of memory that Workstation Pro is
allowed to reserve for all running virtual machines. You can also configure settings to control memory
swapping.
To configure memory preference settings, select Edit > Preferences > Memory.
n
Configuring Reserved Memory on page 242
The reserved memory setting specifies the maximum amount of host RAM that Workstation Pro is
allowed to reserve for all running virtual machines. Reserved memory is not allocated in advance.
n
Configuring Additional Memory Settings on page 243
The additional memory settings control how the memory manager on the host system swaps virtual
machines out of physical RAM.
Configuring Reserved Memory
The reserved memory setting specifies the maximum amount of host RAM that Workstation Pro is allowed
to reserve for all running virtual machines. Reserved memory is not allocated in advance.
To configure the reserved memory setting, select Edit > Preferences > Memory and move the Reserved
memory slider to select the reserved memory amount.
If you set the reserved memory value too high, the CPU might thrash if you run other applications on the
host. If you set the value too low, virtual machines might perform poorly, and you cannot run as many
virtual machines at the same time.
242
VMware, Inc.
Chapter 11 Changing Workstation Pro Preference Settings
On 64-bit hosts, the maximum amount of memory for each virtual machine is 64GB. On 32-bit hosts, the
maximum amount of memory for each virtual machine is 8GB. Workstation Pro prevents powering on
virtual machines that are configured to use more than 8GB of memory on 32-bit hosts. Memory
management limitations on 32-bit operating systems cause virtual machine memory to overcommit, which
severely affects system performance.
The total amount of memory that you can assign to all virtual machines running on a single host system is
limited only by the amount of RAM on the host system.
Configuring Additional Memory Settings
The additional memory settings control how the memory manager on the host system swaps virtual
machines out of physical RAM.
To configure additional memory settings, select Edit > Preferences > Memory.
Table 11‑14. Additional Memory Settings
Setting
Description
Fit all virtual machine memory into
reserved host RAM
Select this option to impose the tightest restrictions on the number and
memory size of virtual machines that can run at a given time. Because the
virtual machines are running entirely in RAM, they have the best possible
performance.
Allow some virtual machine memory to be
swapped
The host operating system can swap a moderate amount of virtual
machine memory to disk. Select this setting to allow the number or
memory size of virtual machines to be increased so that they can run on
the host system at a given time.
This setting might result in reduced performance if virtual machine
memory must be shifted between RAM and disk.
Allow most virtual machine memory to be
swapped
The host operating system can swap as much virtual machine memory to
disk as necessary. When this setting is selected, you can run more virtual
machines with more memory than when the Allow some virtual machine
memory to be swapped setting is selected.
This setting might result in reduced performance if virtual machine
memory must be shifted between RAM and disk.
Configuring Workstation Pro Priority Preference Settings
You can use priority preference settings to enable or disable background snapshots. On Windows hosts, you
can also use priority preference settings to configure process priorities.
To configure priority preference settings, select Edit > Preferences > Priority.
n
Configuring Process Priorities on Windows Hosts on page 243
The default process priority settings control the priority that the Windows process scheduler gives to
the virtual machines that run on the host system. These settings affect the performance of both the host
system and the virtual machines running on it.
n
Configuring Background Snapshots on page 244
Background snapshots settings control how Workstation Pro handles background snapshots.
Configuring Process Priorities on Windows Hosts
The default process priority settings control the priority that the Windows process scheduler gives to the
virtual machines that run on the host system. These settings affect the performance of both the host system
and the virtual machines running on it.
To configure default process priority settings, select Edit > Preferences > Priority.
VMware, Inc.
243
Using VMware Workstation Pro
Process priority settings apply to Windows hosts only. You can override these settings for specific virtual
machines.
Table 11‑15. Default Process Priority Settings
Setting
Description
Input grabbed
Select the priority for virtual machines when their keyboard and
mouse input is grabbed.
Input ungrabbed
Select the priority for virtual machines when their keyboard and
mouse input is not grabbed.
The Normal setting means that the processes within virtual machines contend equally for resources with all
other processes running on the host.
Configuring Background Snapshots
Background snapshots settings control how Workstation Pro handles background snapshots.
To configure background snapshot settings, select Edit > Preferences > Priority.
Taking a snapshot is not an instantaneous process. When background snapshots are enabled, you can
continue to work while Workstation Pro completes the snapshot process in the background.
Table 11‑16. Snapshot Setting Options
Option
Description
Take snapshots in the background when
possible
Enable background snapshots.
Restore snapshots in the background when
possible
Enable the restoration of background snapshots.
Virtual machines must be powered off and then powered on, rather than restarted, for background snapshot
changes to take effect.
Configuring Device Settings for Windows Hosts
You can use device settings to configure removable media and virtual printer settings for Windows hosts.
To configure device settings for Windows hosts, select Edit > Preferences > Devices.
Configuring the Autorun Feature on Windows Hosts
On Windows hosts, the Autorun feature causes CDs and DVDs to run automatically when you insert them
in to the CD-ROM or DVD drive on the host system.
To enable or disable the Autorun feature on a Windows host system, select Edit > Preferences > Devices.
You must be logged in as a member of the Administrators group to change this setting.
To run Autorun programs, some operating systems poll the CD-ROM drive every second or so to determine
whether a disk is present. Polling can cause Workstation Pro to connect to the host CD-ROM or DVD drive,
which can make the drive spin up while the virtual machine appears to pause. Because this behavior is
undesirable, the Autorun feature is disabled by default in Workstation Pro.
Note You can use Windows Explorer to open a disk on the host system when the Autorun feature is
disabled.
244
VMware, Inc.
Chapter 11 Changing Workstation Pro Preference Settings
Configuring Virtual Printers on Windows Hosts
On Windows hosts, you can configure Workstation Pro to support virtual printing on all printers configured
on the host.
Virtual printing is disabled by default on Windows hosts. To enable or disable virtual printing on a
Windows host system, select Edit > Preferences > Devices. Select the Enable virtual printers check box to
enable virtual printers. VMware Tools must be installed on the virtual machine to enable printing. You must
have administrator privileges to enable or disable virtual printers.
The Workstation Pro printer feature uses ThinPrint technology to replicate the host system printer mapping
in the virtual machine. When you enable the virtual machine printer, Workstation Pro configures a virtual
serial port to communicate with the host printers.
Note If any virtual printers are powered on when the Enable virtual printers option is selected, the virtual
machines must be rebooted, or suspended and then resumed, for the setting to take effect.
See “Add a Host Printer to a Virtual Machine,” on page 89
VMware, Inc.
245
Using VMware Workstation Pro
246
VMware, Inc.
Configuring Virtual Machine Option
Settings
12
Virtual machine options settings control characteristics of individual virtual machines, such as how files are
transferred between the host and guest operating system and what happens to a guest operating system
when you exit Workstation Pro. Some virtual machine options override similar Workstation Pro preference
settings.
To configure virtual machine option settings for a selected virtual machine, select VM > Settings and click
the Options tab.
This chapter includes the following topics:
n
“Configuring General Option Settings for a Virtual Machine,” on page 247
n
“Configuring Power Settings for a Virtual Machine,” on page 249
n
“Configuring Snapshot Options for a Virtual Machine,” on page 250
n
“Configuring AutoProtect Options for a Virtual Machine,” on page 251
n
“Configuring Guest Isolation Options for a Virtual Machine,” on page 252
n
“Configuring Tablet Sensor Input Options for a Virtual Machine,” on page 252
n
“Configuring VMware Tools Options for a Virtual Machine,” on page 253
n
“Configuring a Virtual Machine as a VNC Server,” on page 254
n
“Configuring Unity Mode for a Virtual Machine,” on page 254
n
“Configuring Appliance Details for a Virtual Machine,” on page 255
n
“Configuring Autologin for a Virtual Machine,” on page 255
n
“Configuring Advanced Options for a Virtual Machine,” on page 256
Configuring General Option Settings for a Virtual Machine
General option settings include the virtual machine name, the guest operating system type and version, and
the location of the directory where virtual machine files are stored.
To configure general option settings for a selected virtual machine, select VM > Settings, click the Options
tab, and select General.
n
Changing a Virtual Machine Name on page 248
You can change the name of a virtual machine. Changing the name of the virtual machine does not
change the name of this directory, nor does it rename the virtual machine files on the host.
Workstation Pro uses the original name of the virtual machine to create the directory where virtual
machine files are stored.
VMware, Inc.
247
Using VMware Workstation Pro
n
Changing the Guest Operating System on page 248
You can change the guest operating system or operating system version for a virtual machine. You
might want to change the guest operating system for a virtual machine when you upgrade the guest
operating system or if you specified the wrong operating system version when you created the virtual
machine.
n
Changing the Virtual Machine Working Directory on page 248
You can change the working directory for a virtual machine. The working directory is where
Workstation Pro stores suspended state (.vmss), snapshot (.vmsn), and virtual machine paging (.vmem)
files. By default, the working directory is where the virtual machine files are stored.
Changing a Virtual Machine Name
You can change the name of a virtual machine. Changing the name of the virtual machine does not change
the name of this directory, nor does it rename the virtual machine files on the host. Workstation Pro uses the
original name of the virtual machine to create the directory where virtual machine files are stored.
To specify a new name for a selected virtual machine, select VM > Settings, click the Options tab, and select
General.
Changing the Guest Operating System
You can change the guest operating system or operating system version for a virtual machine. You might
want to change the guest operating system for a virtual machine when you upgrade the guest operating
system or if you specified the wrong operating system version when you created the virtual machine.
To select a new guest operating system or operating system version for a selected virtual machine, select
VM > Settings, click the Options tab, and select General.
When you change the operating system type, the virtual machine configuration file is changed but the guest
operating system is not changed. To change the guest operating system, you must obtain the operating
system software and upgrade the guest operating system.
The virtual machine must be powered off when you change these settings.
Changing the Virtual Machine Working Directory
You can change the working directory for a virtual machine. The working directory is where
Workstation Pro stores suspended state (.vmss), snapshot (.vmsn), and virtual machine paging (.vmem) files.
By default, the working directory is where the virtual machine files are stored.
Note You cannot change the working directory for a remote or a shared virtual machine.
To specify a new working directory for a selected virtual machine, select VM > Settings, click the Options
tab, and select General.
You might want to change the working directory in the following situations.
248
n
To organize all of your snapshots in a separate directory, you can create a directory in another location.
If you plan to take many snapshots and use a large amount of disk space, place the working directory
on a disk with a lot of space.
n
To run a virtual machine that is stored on a network share or iPod, which might slow performance, you
can change the working directory to your local hard disk. Then you can take a snapshot, power on the
virtual machine, use it, and discard the snapshot when you are finished. The virtual machine then
reverts to its original state.
n
To create a paging file on a fast disk with a lot of disk space but leave the virtual disk and configuration
file on a different disk, you can change the working directory so that it is located on the fast disk.
VMware, Inc.
Chapter 12 Configuring Virtual Machine Option Settings
Changing the working directory does not change the directory where Workstation Pro stores the virtual
machine configuration (.vmx) file and log files.
The virtual machine must be powered off when you change this setting.
Configuring Power Settings for a Virtual Machine
You can configure power options and power control settings for a virtual machine.
To change power options and settings for a selected virtual machine, select VM > Settings, click the Options
tab, and select Power.
n
Configuring Power Options for a Virtual Machine on page 249
Power options control how a virtual machine behaves after it is powered off, closed, or suspended.
n
Configuring Power Controls for a Virtual Machine on page 249
Power control settings affect the behavior of the stop, suspend, start, and reset buttons for a virtual
machine. The behavior that you select appears in a tooltip when you mouse over the associated button.
Power control settings also determine which power options appear in the context menu when you
right-click the virtual machine in the library.
Configuring Power Options for a Virtual Machine
Power options control how a virtual machine behaves after it is powered off, closed, or suspended.
To configure power options for a selected virtual machine, select VM > Settings, click the Options tab, and
select Power.
Note You cannot configure power options for a shared or remote virtual machine.
Table 12‑1. Power Options
Option
Description
Enter full screen mode after powering on
The virtual machine window enters full screen mode after it is powered on.
Close after powering off or suspending
The virtual machine tab closes after it is powered off or suspended.
Report battery information to guest
Battery information is reported to the guest operating system. If you run
the virtual machine on a laptop in full screen mode, this option enables you
to determine when the battery is running low. This option is available only
for Workstation 6.x and later virtual machines.
Configuring Power Controls for a Virtual Machine
Power control settings affect the behavior of the stop, suspend, start, and reset buttons for a virtual machine.
The behavior that you select appears in a tooltip when you mouse over the associated button. Power control
settings also determine which power options appear in the context menu when you right-click the virtual
machine in the library.
You can configure a soft or hard setting for each power control. A soft setting sends a request to the guest
operating system, which it can ignore or, in the case of a deadlocked guest, it might not be able to handle. A
guest operating system cannot ignore a hard power control. Hard power control settings are configured by
default.
To change power controls for a selected virtual machine, select VM > Settings, click the Options tab, and
select Power.
VMware, Inc.
249
Using VMware Workstation Pro
Table 12‑2. Power Controls
Control
Stop
Suspend
Start
Description
Power Off
(Hard option) Workstation Pro powers off the virtual machine
abruptly with no consideration for work in progress.
Shut Down Guest
(Soft option) Workstation Pro sends a shut down signal to the guest
operating system. An operating system that recognizes the signal
shuts down gracefully. Not all guest operating systems respond to a
shutdown signal from Workstation Pro. If the guest operating
system does not respond to the signal, shut down from the guest
operating system as you would a physical machine.
Suspend
(Hard option) Workstation Pro suspends the virtual machine and
leaves it connected to the network.
Suspend Guest
(Soft option) Workstation Pro suspends the virtual machine and
disconnects it from the network. VMware Tools runs a script in the
guest operating system. On Windows guests, if the virtual machine
is configured to use DHCP, the script releases the IP address of the
virtual machine. On Linux, FreeBSD, and Solaris guests, the script
stops networking for the virtual machine.
Power On
(Hard option) Workstation Pro starts the virtual machine.
Start Up Guest
(Soft option) Workstation Pro starts the virtual machine and
VMware Tools runs a script in the guest operating system. On
Windows guests, if the virtual machine is configured to use DHCP,
the script renews the IP address of the virtual machine. On a Linux,
FreeBSD, or Solaris guest, the script starts networking for the virtual
machine.
Note You cannot configure this setting for a shared or remote virtual machine.
Reset
Reset
(Hard option) Workstation Pro resets the virtual machine abruptly
with no consideration for work in progress.
Restart Guest
(Soft option) Workstation Pro shuts down and restarts the guest
operating system gracefully. VMware Tools runs scripts before the
virtual machine shuts down and when the virtual machine starts up.
Configuring Snapshot Options for a Virtual Machine
When you take a snapshot, Workstation Pro preserves the state of a virtual machine so that you can return to
the same state repeatedly. A snapshot captures the entire state of the virtual machine at the time you take the
snapshot, including the contents of the virtual machine memory, the virtual machine settings, and the state
of all virtual disks.
To configure snapshot options for a selected virtual machine, select VM > Settings, click the Options tab,
and select Snapshots.
Table 12‑3. Snapshot Options
250
Option
Description
Just power off
Power off the virtual machine without making any changes to snapshots.
Revert to snapshot
Revert to the parent snapshot of the current state of the virtual machine. When
you revert to a snapshot, you return the memory, settings, and virtual disks of the
virtual machine to the state that they were in when you took the snapshot.
VMware, Inc.
Chapter 12 Configuring Virtual Machine Option Settings
Table 12‑3. Snapshot Options (Continued)
Option
Description
Take a new snapshot
Takes a snapshot of the virtual machine state after it is powered off. The snapshot
appears in the Snapshot Manager. The name of the snapshot is the date and time
that the virtual machine was powered off and the description is Automatic
snapshot created when powering off.
Note You cannot configure this option for a shared or remote virtual machine.
Ask me
Prompts you to power off or take a snapshot when the virtual machine is
powered off.
Configuring AutoProtect Options for a Virtual Machine
The AutoProtect feature preserves the state of a virtual machine by taking snapshots at regular intervals.
You can also take manual snapshots at any time.
The AutoProtect feature has certain restrictions.
n
Because AutoProtect takes snapshots only while a virtual machine is powered on, you cannot clone
AutoProtect snapshots. You can clone a virtual machine only if it is powered off.
n
AutoProtect snapshots are not taken in Workstation Player, even if AutoProtect is enabled for the
virtual machine in Workstation Pro.
n
You cannot configure the AutoProtect feature for a shared or remote virtual machine.
To configure AutoProtect options for a selected virtual machine, select VM > Settings, click the Options tab,
and select Snapshots.
Table 12‑4. AutoProtect Options
Option
Description
Enable AutoProtect
When you enable the AutoProtect feature, an estimate of the minimum
of amount of disk space used appears in the Virtual Machine Settings
window. The Memory setting for the virtual machine affects this
minimum. The more virtual memory that a virtual machine has, the
more disk space is available for AutoProtect snapshots.
AutoProtect interval
Select the interval of time between AutoProtect snapshots.
Half-Hourly
Snapshots are taken every half hour.
Hourly
Snapshots are taken every hour.
Daily
Snapshots are taken daily.
The interval between AutoProtect snapshots is measured only when the
virtual machine is powered on. For example, if you set AutoProtect to
take snapshots hourly and power off the virtual machine five minutes
later, the next AutoProtect snapshot takes place 55 minutes after you
power on the virtual machine again, regardless of the length of time that
the virtual machine was powered off.
Workstation Pro saves only one snapshot per tier, even if a snapshot
matches more than one tier.
Maximum AutoProtect snapshots
VMware, Inc.
Select the maximum number of snapshots to be retained. After the
maximum number of AutoProtect snapshots is reached, Workstation Pro
deletes the oldest AutoProtect snapshot each time a new AutoProtect
snapshot is taken. Based on the settings that you enter, Workstation Pro
retains a selection of AutoProtect snapshots over a range of time.
251
Using VMware Workstation Pro
Configuring Guest Isolation Options for a Virtual Machine
With the guest isolation option, you can restrict file operations between the virtual machine and the host
system, and between the virtual machine and other virtual machines.
To configure guest isolation options for a selected virtual machine, select VM > Settings, click the Options
tab, and select Guest Isolation.
These restrictions apply:
n
VMware Tools must be installed in the guest operating system to use guest isolation features.
n
You cannot configure these options for a shared or remote virtual machine.
Note The drag-and-drop and copy-and-paste operations are enabled by default. You might want to disable
these operations to prevent files from being accidentally transferred between the virtual machine and the
host system.
Table 12‑5. Guest Isolation Options
Option
Description
Enable drag and drop
When this check box is deselected, these operations are restricted.
n Drag and drop files from the host system to a Linux, Windows, or
Solaris guest operating system.
n Drag and drop files from the guest operating system to the host system.
n Drag files from a file manager to an application that supports drag and
drop, or from applications such as zip file managers that support dragand-drop extraction of individual files.
Enable copy and paste
When this check box is deselected, these operations are restricted.
n Copy and paste text and files from the host system to a Linux,
Windows, or Solaris 10 guest operating system.
n Copy and paste from the guest operating system to the host system.
n Copy and paste text and files from one virtual machine to another.
For virtual machines running Windows 8 or later guest operating systems, you can configure the guest
operating system to pass tablet sensor data to a tablet. See “Configuring Tablet Sensor Input Options for a
Virtual Machine,” on page 252
Configuring Tablet Sensor Input Options for a Virtual Machine
You can configure a Windows 8 or later guest operating system to pass tablet sensor data to your host
Windows 8 or later tablet. With this setting, you can use tablet applications inside your virtual machine.
Prerequisites
n
Power off a Windows 8 or later virtual machine.
Note Tablet data is available only on guest operating systems and hosts running Windows 8 or later.
Procedure
1
252
Select the Windows 8 or later virtual machine and select VM > Settings > Options > Guest Isolation
VMware, Inc.
Chapter 12 Configuring Virtual Machine Option Settings
2
3
Select the tablet sensor data to be shared with the Windows 8 or later host from the Share sensor input
section.
Option
Description
Orientation
Detects the orientation of the device. For example in landscape or portrait
mode.
Motion
Detects changes in physical speed.
Ambient light
Checks the available light.
Click OK.
Configuring VMware Tools Options for a Virtual Machine
You can configure how VMware Tools is updated on a virtual machine. You can also configure whether the
clock on the guest operating system is synchronised with the clock on the host.
VMware Tools Update Options
The virtual machine VMware Tools update options override the Workstation Pro preferences for
automatically updating VMware Tools on Linux and Windows guest operating systems.
To configure VMware Tools updates for a selected virtual machine, select VM > Settings, click the Options
tab, and select VMware Tools.
Note Automatic updates are not supported for versions of VMware Tools included in virtual machines
created with older versions of VMware products, such as Workstation 5.5 and earlier or VMware Server 1.x.
Table 12‑6. VMware Tools Update Options
Option
Description
Update manually (do nothing)
You must update VMware Tools manually. A message appears
on the status bar of the guest operating system when a new
version of VMware Tools is available.
Update automatically
VMware Tools is updated automatically when a new version is
available. The status bar indicates when an update is in
progress.
Use application default (currently update
automatically)
Use the default VMware Tools update behavior.
Note You cannot configure this option for a shared or remote
virtual machine.
To install a VMware Tools update, use the same procedure that you used for installing VMware Tools the
first time.
Time Synchronization
If you turn on the VMware Tools time synchronization feature, VMware Tools checks once every minute to
determine whether the clocks on the guest and host operating systems still match. If not, the clock on the
guest operating system is synchronized to match the clock on the host.
Native time synchronization software, such as Network Time Protocol (NTP) for Linux and the Mac OS X,
or Microsoft Windows Time Service (Win32Time) for Windows, is typically more accurate than VMware
Tools periodic time synchronization and is therefore preferred.
VMware, Inc.
253
Using VMware Workstation Pro
Configuring a Virtual Machine as a VNC Server
You can configure a virtual machine so that VNC clients can access it remotely. You do not need to install
specialized VNC software in the virtual machine.
To configure Virtual Network Computing (VNC) client access for a selected virtual machine, select VM >
Settings, click the Options tab, and select VNC Connections.
Note You cannot configure VNC client access for a shared or remote virtual machine.
Table 12‑7. Remote Display Options
Option
Description
Enable VNC
VNC clients can access the virtual machine.
Port
Select a unique port number for the virtual machine. A unique port number is
required to connect to multiple virtual machines on the same host. Use a port
number in the range 5901 to 6001. The default port is 5900.
Important Make sure that you specify an available port number. The
VMware Management Interface uses ports 8333 and 8222. The VMware
Workstation Server service uses port 443 by default. On Linux, only the root
user can listen to ports up to port number 1024.
Password
The password to use to connect to the virtual machine from a VNC client. It
can be up to eight characters long. Because the password is not encrypted
when the VNC client sends it, do not use a password that you use for other
systems.
View VNC Connections
Click this button to see a list of the VNC clients that are connected to the
virtual machine.
Configuring Unity Mode for a Virtual Machine
In virtual machines that have Windows XP or later guest operating systems, you can switch to Unity mode
to display applications directly on the host system desktop. Open applications in Unity mode appear on the
taskbar in the same way as open host system applications.
To configure Unity mode settings for a selected virtual machine, select VM > Settings, click the Options tab,
and select Unity.
Note You cannot configure Unity mode settings for a shared or remote virtual machine.
Table 12‑8. Unity Mode Options
254
Setting
Description
Show borders
Set a window border that identifies the application as belonging to the
virtual machine rather than to the host computer.
Show badges
Display a logo in the title bar.
VMware, Inc.
Chapter 12 Configuring Virtual Machine Option Settings
Table 12‑8. Unity Mode Options (Continued)
Setting
Description
Use a custom color in window borders
Use a custom color in window borders to help distinguish between the
application windows that belong to various virtual machines. For
example, you can set the applications for one virtual machine to have a
blue border and set the applications for another virtual machine to have
a yellow border. On Windows hosts, click Choose color to use the color
chooser.
Enable applications menu
The virtual machine Start or Applications menu appears on the host
system desktop.
When you can access the virtual machine Start or Applications menu
from the host machine desktop, you can start applications in the virtual
machine that are not open in Unity mode. If you do not enable this
setting, you must exit Unity mode to display the virtual machine Start or
Applications menu in the console view.
Configuring Appliance Details for a Virtual Machine
You can configure version and author information and enable an HTTP access port inside a virtual machine.
To configure appliance details for a selected virtual machine, select VM > Settings, click the Options tab,
and select Appliance Details.
The virtual machine must be a Workstation 6.x or later virtual machine.
Note You cannot configure appliance details for a shared or remote virtual machine.
Table 12‑9. Application Details Options
Setting
Description
Version
(Optional) The virtual machine version, which appears in the upper right corner
of the summary page.
Author
(Optional) The virtual machine author, which appears in the upper right corner
of the summary page.
Access port inside virtual machine
The HTTP access port. When this check box is selected, the HTTP access port is
enabled inside the virtual machine. You can also change the port number. The
default HTTP port is 80.
Configuring Autologin for a Virtual Machine
You can configure the Autologin feature for virtual machines that have a Windows 2000 or later guest
operating system. To use Autologin, the virtual machine must be powered on, you must have an existing
user account on the local machine, and the latest version of VMware Tools must be installed.
To configure Autologin for a selected virtual machine, select VM > Settings, click the Options tab, and select
Autologin.
Note You cannot configure the Autologin feature for a shared or remote virtual machine.
When you enable Autologin, you must type your login credentials. If you type an incorrect or expired
password, you must type your login credentials when you power on the virtual machine. To change your
login credentials, select Change User.
Note When you enable Autologin or change your login credentials, Autologin settings are saved
immediately. If you click Cancel in the Virtual Machine Settings dialog box, the changes applied to the
Autologin settings are not affected.
VMware, Inc.
255
Using VMware Workstation Pro
Configuring Advanced Options for a Virtual Machine
Advanced options include process priority settings, debugging settings, memory settings, and virtual
machine file locations.
To configure advanced options for a selected virtual machine, select VM > Settings, click the Options tab,
and select Advanced.
n
Configuring Process Priorities for a Virtual Machine on page 256
Process priority settings control the priority that the Windows process scheduler gives to the virtual
machine. Process priority settings apply to Windows hosts only. The default settings are specified in
Workstation Pro priority preference settings.
n
Gathering Debugging Information on page 256
When it runs in debugging mode, a virtual machine collects information that helps VMware technical
support resolve problems.
n
Configuring Advanced Settings for a Virtual Machine on page 257
You can configure advanced settings for the selected virtual machine to disable memory page
trimming, enable Template mode, and boot the virtual machine from EFI.
Configuring Process Priorities for a Virtual Machine
Process priority settings control the priority that the Windows process scheduler gives to the virtual
machine. Process priority settings apply to Windows hosts only. The default settings are specified in
Workstation Pro priority preference settings.
To configure process priority settings for a selected virtual machine, select VM > Settings, click the Options
tab, and select Advanced.
Note You cannot configure process priority settings for a shared or remote virtual machine.
Table 12‑10. Process Priority Options
Option
Description
Input grabbed
Select the priority for the virtual machine when its keyboard and mouse input is grabbed.
The default setting is specified in Workstation Pro priority preference settings.
Input ungrabbed
Select the priority for the virtual machine when its keyboard and mouse input is not grabbed.
The Normal setting specifies that processes in the virtual machine contend equally for resources with all
other processes running on the host.
Gathering Debugging Information
When it runs in debugging mode, a virtual machine collects information that helps VMware technical
support resolve problems.
To configure debugging mode for a selected virtual machine, select VM > Settings, click the Options tab,
and select Advanced. The debugging level is set in the Gather debugging information drop-down menu.
256
VMware, Inc.
Chapter 12 Configuring Virtual Machine Option Settings
Table 12‑11. Debugging Levels
Option
Description
None
Normal mode. No debugging information is gathered. When this mode is selected,
the virtual machine runs faster than it does in the other modes.
When the cause and remedy for the problem are found, return to normal mode by
selecting None.
Full
Select this mode if the virtual machine crashes and you want to send the debugging
logs to VMware technical support.
Statistics
Select this mode if the virtual machine runs very slowly under certain workloads.
You can send the statistics file to VMware technical support.
If you select the Full option, you can select the Gather verbose USB debugging information check box for
USB debugging purposes.
For local virtual machines, you can select Log virtual machine progress periodically to increase logging
information for debugging and troubleshooting purposes. You cannot use this feature for remote or shared
virtual machines. When this setting is selected, you do not need to edit a configuration file or restart the
virtual machine to extract more detailed logging for VMware technical support.
Configuring Advanced Settings for a Virtual Machine
You can configure advanced settings for the selected virtual machine to disable memory page trimming,
enable Template mode, and boot the virtual machine from EFI.
To configure additional advanced options for a selected virtual machine, select VM > Settings, click the
Options tab, and select Advanced.
Note You cannot configure these options for a shared or remote virtual machine.
Table 12‑12. Additional Advanced Options
Option
Description
Disable memory page trimming
Workstation Pro uses a memory trimming technique to return unused virtual
machine memory to the host machine for other uses. While trimming usually has
little effect on performance and might be needed in low-memory situations, the
I/O caused by memory trimming can sometimes interfere with disk-oriented
workload performance in a guest.
Log virtual machine progress
periodically
When enabled, Workstation Pro includes information about your virtual
machine's virtual CPU state, instruction pointer, and code segment registers in
the log file. This is useful for troubleshooting or optimizing the performance of
your virtual machine.
Enable Template mode (to be used
for cloning)
When you create a linked clone of a virtual machine, the clone depends on the
parent virtual machine to function. If a linked clone cannot access the parent
virtual machine or the snapshot on which the clone is based, the clone no longer
operates. You can avoid this problem by designating the parent virtual machine
of a linked clone as a template.
You typically must have write access to a virtual machine to clone it. A virtual
machine that is designated as a clone template can be cloned by users who do not
have write access to the template virtual machine.
To protect linked clones, you cannot delete a template virtual machine. You
cannot delete snapshots of the template.
Boot with EFI instead of BIOS
When enabled, the virtual machine is booted from Extensible Firmware Interface
(EFI) instead of BIOS. The guest operating system to be installed on the virtual
machine must support EFI firmware. You can specify the EFI firmware option
when you create a remote virtual machine in shared virtual machine mode.
VMware, Inc.
257
Using VMware Workstation Pro
258
VMware, Inc.
Configuring Virtual Machine
Hardware Settings
13
You can use virtual machine hardware settings to add, remove, and modify virtual devices for a virtual
machine.
To configure hardware settings for a selected virtual machine, select VM > Settings and click the Hardware
tab. When you select a device in the left pane, the configuration options for that device appear in the right
pane.
This chapter includes the following topics:
n
“Adding Hardware to a Virtual Machine,” on page 259
n
“Removing Hardware from a Virtual Machine,” on page 261
n
“Adjusting Virtual Machine Memory,” on page 261
n
“Configuring Virtual Machine Processor Settings,” on page 261
n
“Configuring and Maintaining Virtual Hard Disks,” on page 262
n
“Configuring CD-ROM and DVD Drive Settings,” on page 264
n
“Configuring Floppy Drive Settings,” on page 266
n
“Configuring Virtual Network Adapter Settings,” on page 266
n
“Configuring USB Controller Settings,” on page 270
n
“Configuring Sound Card Settings,” on page 271
n
“Configuring Parallel Port Settings,” on page 271
n
“Configuring Serial Port Settings,” on page 271
n
“Configuring Generic SCSI Device Settings,” on page 272
n
“Configuring Printer Settings,” on page 273
n
“Configuring Display Settings,” on page 273
n
“Installing a Guest Operating System on a Physical Disk or Unused Partition,” on page 274
Adding Hardware to a Virtual Machine
You can use virtual machine hardware settings to add hardware to an existing virtual machine.
To add hardware to a selected virtual machine, select VM > Settings, click the Hardware tab, and click Add.
Note You cannot add hardware to a virtual machine while it is in suspended state.
VMware, Inc.
259
Using VMware Workstation Pro
The Add Hardware wizard prompts you to select the type of device that you want to add and to specify
device-specific configuration settings. You can modify many of the configuration settings after the device is
created by changing virtual machine hardware settings.
You can add the following types of devices to a virtual machine.
260
Virtual hard disks
A virtual hard disk is a set of files that appears as a physical disk drive to the
guest operating system. You can configure a virtual hard disk as an IDE,
SCSI, or SATA device. You can add up to 4 IDE devices, up to 60 SCSI
devices, and up to 120 SATA devices (4 controllers and 30 devices per
controller) to a virtual machine. You can also give a virtual machine direct
access to a physical disk.
CD-ROM and DVD
drives
You can configure a virtual CD-ROM or DVD drive as an IDE, SCSI, or SATA
device. You can add up to 4 IDE devices, up to 60 SCSI devices, and up to 120
SATA devices (4 controllers and 30 devices per controller) to a virtual
machine. You can connect virtual CD-ROM and DVD drives to a physical
drive on the host system or to an ISO image file.
Floppy drives
You can add up to two floppy drives. A virtual floppy drive can connect to a
physical drive on the host system, to an existing floppy image file, or to a
blank floppy image file.
Network adapters
You can add up to 10 virtual network adapters to a virtual machine.
USB controller
You can add one USB controller to a virtual machine. A virtual machine must
have a USB controller to use USB devices or smart card readers. For smart
card readers, a virtual machine must have a USB controller regardless of
whether the smart card reader is actually a USB device.
Sound card
If the host system is configured for sound and has a sound card installed,
you can enable sound for virtual machines.
Parallel (LPT) ports
You can attach up to three bidirectional parallel ports to a virtual machine.
Virtual parallel ports can output to parallel ports or to files on the host
operating system.
Serial (COM) ports
You can add up to four serials ports to a virtual machine. Virtual serial ports
can output to physical serial ports, files on the host operating system, or
named pipes.
Printers
You can print from a virtual machine to any printer available to the host
system without installing additional drivers in the virtual machine.
Workstation Pro uses ThinPrint technology to replicate the host machine
printer mapping in the virtual machine. When you enable the virtual
machine printer, Workstation Pro configures a virtual serial port to
communicate with the host printers.
Generic SCSI devices
You can add up to 60 SCSI devices to a virtual machine. A generic SCSI
device gives the guest operating system direct access to a SCSI device
connected to the host system. Generic SCSI devices can include scanners,
tape drives, CD-ROM drives, and DVD drives.
VMware, Inc.
Chapter 13 Configuring Virtual Machine Hardware Settings
Removing Hardware from a Virtual Machine
You can remove certain types of hardware from a virtual machine.
To remove hardware from a selected virtual machine, select VM > Settings, click the Hardware tab, select
the device, and click Remove.
Note You cannot remove hardware from a virtual machine while it is in suspended state.
You can remove the following types of devices from a virtual machine.
n
Virtual hard disks
n
CD-ROM and DVD drives
n
Floppy drives
n
Virtual network adapters
n
USB controllers
n
Sound cards
n
Printers
n
Generic SCSI devices
You cannot remove the Memory, Processors, and Display device types.
You must power off a virtual machine before you remove a virtual network adapter, sound card, parallel
port, serial port, or generic SCSI device. You must also power off Workstation 5 virtual machines before you
remove a USB controller.
Adjusting Virtual Machine Memory
You can adjust the amount of memory that is allocated to a virtual machine. You must power off a virtual
machine before you change its memory allocation setting.
To adjust the memory allocation for a selected virtual machine, select VM > Settings, click the Hardware
tab, and click Memory.
The Memory panel includes information to help you select the appropriate amount of memory for the
virtual machine. The high end of the range is determined by the amount of memory that is allocated to all
running virtual machines. If you allow virtual machine memory to be swapped, this value changes to reflect
the specified amount of swapping.
The color-coded icons on the Memory panel indicate the maximum recommended memory, the
recommended memory, and the guest operating system recommended minimum memory amounts. To
adjust the memory, move the slider along the range of values, or type a value in the Memory for this virtual
machine text box.
Note Allocating more than the maximum memory to a virtual machine might cause memory swapping. It
can also negatively affect host system performance, including the ability to run Workstation Pro.
Configuring Virtual Machine Processor Settings
You can configure processor settings for a virtual machine, including the number of processors, the number
of cores per processor, and the preferred execution mode for the virtualization engine.
To configure processor settings for a selected virtual machine, select VM > Settings, click the Hardware tab,
and select Processors.
VMware, Inc.
261
Using VMware Workstation Pro
Table 13‑1. Processor Settings
Setting
Description
Number of processors and Number of cores
per processor
Select the number of processors and the number of cores per processor.
Workstation Pro supports up to 16-way virtual Symmetric
Multiprocessing (SMP) for guest operating systems running on
multiprocessor host machines. You can assign processors and cores per
processor to a virtual machine on any host machine that has at least two
logical processors.
Preferred mode
Select the preferred execution mode for the virtualization engine. You
usually do not need to change virtualization engine settings.
Automatic
Workstation Pro chooses the execution mode
based on the guest operating system and the host
CPU.
Binary
translation
Workstation Pro uses a mix of directly executing
guest code and binary translation to run the guest
operating system. Guest memory mapping is
performed by using shadow page tables.
Intel VT-x or
AMD-V
Workstation Pro uses hardware extensions to run
and isolate guest code. Guest memory mapping is
performed by using shadow page tables.
Intel VT-x/EPT
or AMD-V/RVI
Workstation Pro uses hardware extensions to run
and isolate guest code. Guest memory mapping is
performed by using hardware paging.
Note You cannot configure this setting for a shared or remote virtual
machine.
Disable acceleration for binary translation
In rare instances, you might find that Workstation Pro appears to freeze
when you install or run software inside a virtual machine. This problem
typically occurs early in the execution of the program. In many cases, you
can prevent the problem by temporarily disabling acceleration in the
virtual machine. After the program passes the point at which the
problems occur, deselect this setting.
Virtualize Intel VT-x/EPT or AMD-V/RVI
Workstation Pro forces the virtual machine execution mode to VT-x/EPT
or AMD-RVI. Physical Address Extension (PAE) mode must be enabled
to use virtualized AMD-V/RVI.
If the execution mode is not supported by the host system, virtualized
VT-x/EPT or AMD/RVI is not available. If you migrate the virtual
machine to another VMware product, virtualized VT-x/EPT or AMDV/RVI might not be available.
Note You cannot configure this setting for a shared or remote virtual
machine.
Virtualize CPU performance counters
Turn on this feature if you plan to use performance monitoring
applications such as VTune or OProfile to optimize or debug software
that runs inside the virtual machine.
This feature is available only if the virtual machine compatibility is
Workstation 9 or later.
Configuring and Maintaining Virtual Hard Disks
You can configure virtual hard disk node and mode settings. You can also use command in the Utilities
menu to perform common disk maintenance tasks, such as defragmenting, compacting, and expanding a
disk.
To perform actions on a virtual hard disk for a selected virtual machine, select VM > Settings, click the
Hardware tab, and select the virtual hard disk.
262
VMware, Inc.
Chapter 13 Configuring Virtual Machine Hardware Settings
n
Defragmenting Virtual Hard Disks on page 263
Like physical disk drives, virtual hard disks can become fragmented. Defragmenting disks rearranges
files, programs, and unused space on the virtual disk so that programs run faster and files open more
quickly. Defragmenting does not reclaim unused space on a virtual disk.
n
Expanding Virtual Hard Disks on page 263
Expanding a virtual hard disk adds storage space to the virtual machine.
n
Compacting Virtual Hard Disks on page 264
Compacting a virtual hard disk reclaims unused space in the disk. If a disk has empty space, this
process reduces the amount of space the virtual hard disk occupies on the host drive. You must power
off a virtual machine before you compact its virtual hard disk.
n
Changing Virtual Hard Disk Node and Mode Settings on page 264
You can change virtual hard disk node and mode settings.
Defragmenting Virtual Hard Disks
Like physical disk drives, virtual hard disks can become fragmented. Defragmenting disks rearranges files,
programs, and unused space on the virtual disk so that programs run faster and files open more quickly.
Defragmenting does not reclaim unused space on a virtual disk.
There must be adequate free working space on the host system to defragment a virtual hard disk. If the disk
is contained in a single file, for example, you need free space equal to the size of the disk file. Other virtual
hard disk configurations require less free space. You cannot defragment a virtual hard disk while it is
mapped or mounted.
To defragment a virtual hard disk for a selected virtual machine, select VM > Settings, click the Hardware
tab, select the virtual hard disk, and select Defragment from the Utilities menu.
Note Defragmenting a virtual hard disk can take several minutes.
Expanding Virtual Hard Disks
Expanding a virtual hard disk adds storage space to the virtual machine.
When you expand a virtual hard disk, the added space is not immediately available to the virtual machine.
To make the added space available, you must use a disk management tool to increase the size of the existing
partition on the virtual hard disk to match the expanded size.
The disk management tool that you use depends on the virtual machine guest operating system. Many
operating systems, including Windows Vista, Windows 7, and some versions of Linux, provide built-in disk
management tools that can resize partitions. Third-party disk management tools are also available, such as
Symantec/Norton PartitionMagic, EASEUS Partition Master, Acronis Disk Director, and the open-source tool
GParted.
When you expand the size of a virtual hard disk, the sizes of partitions and file systems are not affected.
To expand a virtual hard disk for a selected virtual machine, select VM > Settings, click the Hardware tab,
select the virtual hard disk, and select Expand from the Utilities menu.
Note As an alternative to expanding a virtual hard disk, you can add a new virtual hard disk to the virtual
machine.
VMware, Inc.
263
Using VMware Workstation Pro
Compacting Virtual Hard Disks
Compacting a virtual hard disk reclaims unused space in the disk. If a disk has empty space, this process
reduces the amount of space the virtual hard disk occupies on the host drive. You must power off a virtual
machine before you compact its virtual hard disk.
You cannot compact a virtual hard disk if disk space is preallocated or if the virtual hard disk is mapped or
mounted.
To compact a virtual hard disk for a selected virtual machine, select VM > Settings, click the Hardware tab,
select the virtual hard disk, and select Compact from the Utilities menu.
Changing Virtual Hard Disk Node and Mode Settings
You can change virtual hard disk node and mode settings.
To change the node and mode settings for a virtual hard disk on a selected virtual machine, select VM >
Settings, click the Hardware tab, select the virtual hard disk, and click Advanced. By default, changes are
immediately written to the disk. The data on the disk is saved when you take a snapshot of the virtual
machine.
Table 13‑2. Virtual Hard Disk Node and Mode Settings
Setting
Description
Virtual device node
Select the SCSI, IDE, or SATA device identifier to use for the drive. For example, if you
select SCSI 0:2, the guest operating system detects the drive as ID 2 on controller 0.
You determine whether the virtual disk is seen as a SCSI, IDE, or SATA device at the
time that you create it.
Independent
For independent disks, records data on the disk when you take a snapshot of the
virtual machine. If the Independent check box is unavailable, the virtual machine
might have snapshots. After you delete the snapshots, the check box becomes
available.
You can further specify whether changes that you make to the disk should persist or
be discarded when you power off or restore a snapshot.
Configuring CD-ROM and DVD Drive Settings
You can configure CD-ROM and DVD drive settings, including the virtual device node and legacy
emulation modes.
To configure CD-ROM and DVD drive settings for a selected virtual machine, select VM > Settings, click the
Hardware tab, and select the drive.
n
Configuring CD-ROM and DVD Drive Status and Connection Settings on page 265
Device status and connection settings control when a CD-ROM or DVD drive is connected to a virtual
machine, whether to use a specific drive or allow Workstation Pro to detect a drive, and whether to use
an ISO image file instead of a physical drive.
n
Changing Virtual Device Node and Legacy Emulation Settings on page 265
You can use the advanced settings to change the virtual device node and legacy emulation settings for
a CD-ROM or DVD drive. You must power off the virtual machine before you change these settings.
264
VMware, Inc.
Chapter 13 Configuring Virtual Machine Hardware Settings
Configuring CD-ROM and DVD Drive Status and Connection Settings
Device status and connection settings control when a CD-ROM or DVD drive is connected to a virtual
machine, whether to use a specific drive or allow Workstation Pro to detect a drive, and whether to use an
ISO image file instead of a physical drive.
To configure device status and connection settings for a selected virtual machine, select VM > Settings, click
the Hardware tab, and select the drive.
Table 13‑3. Device Status and Connection Settings
Setting
Description
Connected
Connect the drive or ISO image file while the virtual machine is running.
Connect at power on
Connect the drive or ISO image path when you power on the virtual machine.
Connection
Select the location of the physical drive or ISO image file.
Remote Server
(Remote virtual machine only) The physical drive or ISO
image file is located on the remote host.
Local Client
(Remote virtual machine only) The physical drive or ISO
image file is located on the local host.
Local (Across
Sessions)
(Shared virtual machine only) The physical drive or ISO
image file can be used across multiple sessions.
Local (Single
Session)
(Shared virtual machine only) The physical drive or ISO
image file can be used only in this session.
Use physical drive
Select a specific drive or select Auto detect to allow Workstation Pro to detect a
drive to use.
Use ISO image file
Specify or select an ISO image file for the virtual machine to use.
To disable or enable access to a CD-ROM or DVD drive while a virtual machine is running, select the virtual
machine, select VM > Removable Devices > CD/DVD, and select Disconnect or Connect.
Changing Virtual Device Node and Legacy Emulation Settings
You can use the advanced settings to change the virtual device node and legacy emulation settings for a CDROM or DVD drive. You must power off the virtual machine before you change these settings.
To configure virtual device and legacy emulation settings for a selected virtual machine, select VM >
Settings, click the Hardware tab, select the drive, and click Advanced.
Use the settings to select which SCSI, IDE, or SATA device identifier to use for the drive. For example, if you
select SCSI 0:2, the guest operating system detects the drive as ID 2 on controller 0. You can select the IDE,
SCSI, or SATA node options regardless of the physical device type. For example, if the physical drive is an
IDE device, you can select a SCSI node. In this case, the virtual machine detects the drive as a SCSI device.
If you select the Legacy emulation setting, the virtual hardware works as it did in an earlier release of
Workstation Pro. By default, Workstation Pro attempts to make the advanced features of your drive
available, but sometimes this setting might cause the drive to not work with the virtual machine. Selecting
the Legacy emulation setting reverts Workstation Pro to the previous emulation mode for the drive. Legacy
emulation is helpful for troubleshooting purposes.
VMware, Inc.
265
Using VMware Workstation Pro
Configuring Floppy Drive Settings
You can configure when a floppy drive is connected to a virtual machine, whether to use a specific drive or
allow Workstation Pro to detect a drive, and whether to use an disk drive image file instead of a physical
drive.
To configure floppy drive settings for a selected virtual machine, select VM > Settings, click the Hardware
tab, and select the floppy drive.
Table 13‑4. Floppy Drive Settings
Setting
Description
Connected
Connect the drive or floppy image file while the virtual machine is running.
Connect at power on
Connect the floppy drive when you power on the virtual machine.
Location
Select the location of the physical drive or floppy image file.
Remote Server
(Remote virtual machine only) The physical drive or
floppy image file is located on the remote host.
Local Client
(Remote virtual machine only) The physical drive or
floppy image file is located on the local host.
Local (Across
Sessions)
(Shared virtual machine only) The physical drive or
floppy image file can be used across multiple sessions.
Local (Single
Session)
(Shared virtual machine only) The physical drive or
floppy image file can be used only in this session.
Use a physical drive
Select a specific floppy drive or select Auto detect to allow Workstation Pro to
detect a drive to use.
Use a floppy image file
Create or browse to a floppy image (.img or .flp) file. Select Read only to
prevent changes from being made to the file.
To disable or enable access to a floppy drive while a virtual machine is running, select the virtual machine,
select VM > Removable Devices > Floppy, and select Disconnect or Connect.
Configuring Virtual Network Adapter Settings
You can configure when a virtual network adapter is connected to a virtual machine and the type of network
connection that the adapter provides.
The type of network configuration that you can select depends on whether the virtual machine is a local,
shared, or remote virtual machine.
To configure virtual network adapter settings for a selected virtual machine, select VM > Settings, click the
Hardware tab, and select the virtual network adapter.
n
Configuring Virtual Network Adapter Device Status Settings on page 267
Device status settings control when a virtual network adapter is connected to a virtual machine.
n
Configuring a Network Connection on page 267
You can configure the type of network connection that a virtual network adapter provides.
n
Configuring Virtual Network Adapter Advanced Settings on page 269
You can use the advanced virtual network adapter settings to limit the bandwidth and specify the
acceptable packet loss percentage for incoming and outgoing data transfers.
266
VMware, Inc.
Chapter 13 Configuring Virtual Machine Hardware Settings
Configuring Virtual Network Adapter Device Status Settings
Device status settings control when a virtual network adapter is connected to a virtual machine.
To configure virtual network adapter device status settings for a selected virtual machine, select VM >
Settings, click the Hardware tab, and select the virtual network adapter.
Table 13‑5. Device Status Settings
Setting
Description
Connected
Connect the virtual network adapter while the virtual machine is running.
Connect at power on
Connect the virtual network adapter when you power on the virtual machine.
Configuring a Network Connection
You can configure the type of network connection that a virtual network adapter provides.
For a local virtual machine, you can configure bridged, NAT, or host-only networking, or you can select a
custom network or LAN segment. For a shared virtual machine, you can select bridged, NAT, or host-only
networking from a drop-down menu. For a remote virtual machine, you must select a custom network.
To configure a network connection for a selected virtual machine, select VM > Settings, click the Hardware
tab, and select the virtual network adapter.
n
Configuring Bridged Networking on page 267
When you configure bridged networking, the virtual machine uses physical network adapters on the
host system to connect a network.
n
Configuring Network Address Translation on page 268
When you configure Network Address Translation (NAT), the virtual machine shares the IP address
and MAC address of the host system.
n
Configuring Host-Only Networking on page 268
When you configure host-only networking, Workstation Pro creates a virtual private network (VPN)
connection between the virtual machine and the host system.
n
Configuring a Custom Network Configuration on page 269
A custom network is a network that you create by using the virtual network editor. You can select a
custom network when you modify the network connection setting for a local virtual machine. For a
remote virtual machine, you must select a custom network. You cannot select a custom network for a
shared virtual machine.
n
Configuring LAN Segments on page 269
When you select a LAN segment, the virtual machine uses a private network that can be shared with
other virtual machines. LAN segments are useful for multitier testing, network performance analysis,
and situations where virtual machine isolation are important.
Configuring Bridged Networking
When you configure bridged networking, the virtual machine uses physical network adapters on the host
system to connect a network.
If the host system is on a network, bridged networking is often the easiest way to give a virtual machine
access to that network.
VMware, Inc.
267
Using VMware Workstation Pro
With bridged networking, the virtual machine appears as an additional computer on the same physical
Ethernet network as the host system. The virtual machine can transparently use the services available on the
network, including file servers, printers, and gateways. Physical hosts and other virtual machines
configured with bridged networking can also use the resources of the virtual machine.
When you use bridged networking, the virtual machine must have its own identity on the network. For
example, on a TCP/IP network, the virtual machine must have its own IP address. Virtual machines
typically acquire an IP address and other network details from a DHCP server. In some configurations, you
might need to set the IP address and other details manually.
Users who boot multiple operating systems often assign the same address to all systems because they
assume that only one operating system will be running at the same time. If the host system is set up to boot
multiple operating systems and you run one or more of them in virtual machines, configure each operating
system with a unique network address.
When the Replicate physical connection state option is selected, the IP address is automatically renewed
when you move from one wired or wireless network to another. This setting is useful for virtual machines
than run on laptops or other mobile devices.
Configuring Network Address Translation
When you configure Network Address Translation (NAT), the virtual machine shares the IP address and
MAC address of the host system.
The virtual machine and the host system share the a single identity that is not visible outside the network.
The virtual machine does not have its own IP address. Instead, a separate private network is set up on the
host system and the virtual machine obtains an address on that network from the VMware virtual DHCP
server. The VMware NAT device passes network data between one or more virtual machines and the
external network. The VMware NAT device identifies incoming data packets that are intended for each
virtual machine and sends them to the correct destination.
With NAT, a virtual machine can use many standard protocols to connect to other machines on the external
network. For example, you can use HTTP to browse Web sites, FTP to transfer files, and Telnet to log in to
other systems. You can also connect to a TCP/IP network by using a Token Ring adapter on the host system.
In the default configuration, systems on the external network cannot initiate connections to the virtual
machine. For example, the default configuration does not let you use the virtual machine as a Web server to
send Web pages to systems on the external network. This limitation protects the guest operating system
from being compromised before you can install security software.
By default, NAT is used when you use the New Virtual Machine wizard to create a virtual machine.
The virtual machine uses NAT to connect to the Internet or other TCP/IP network by using the networking
connection on the host system. NAT works with Ethernet, DSL, and phone modems. A separate private
network is set up on the host system. The virtual machine obtains an address on that network from the
VMware virtual DHCP server.
Configuring Host-Only Networking
When you configure host-only networking, Workstation Pro creates a virtual private network (VPN)
connection between the virtual machine and the host system.
A VPN is typically not visible outside the host system. Multiple virtual machines configured with host-only
networking on the same host system are on the same network. The VMware DHCP server provides
addresses on the network.
If you install the proper routing or proxy software on the host system, you can establish a connection
between the host virtual network adapter and a physical network adapter on the host system. With this
configuration, you can connect the virtual machine to a Token Ring or other non-Ethernet network.
268
VMware, Inc.
Chapter 13 Configuring Virtual Machine Hardware Settings
Configuring a Custom Network Configuration
A custom network is a network that you create by using the virtual network editor. You can select a custom
network when you modify the network connection setting for a local virtual machine. For a remote virtual
machine, you must select a custom network. You cannot select a custom network for a shared virtual
machine.
A custom network can be connected to one or more external networks, or it can run entirely on the host
system. You can use the virtual network editor to access multiple network cards in the host system and
create multiple virtual networks.
For more information, see Chapter 14, “Using the Virtual Network Editor,” on page 275.
Configuring LAN Segments
When you select a LAN segment, the virtual machine uses a private network that can be shared with other
virtual machines. LAN segments are useful for multitier testing, network performance analysis, and
situations where virtual machine isolation are important.
You cannot configure a LAN segment for a shared or remote virtual machine.
If you add an existing virtual machine to a LAN segment, the virtual machine might be configured to expect
an IP address from a DHCP server. Unlike host-only and NAT networking, Workstation Pro does not
provide a DHCP server for LAN segments. You must manually configure IP addressing for virtual machines
on a LAN segment. You can either configure a DHCP server on the LAN segment to allocate IP addresses, or
you can configure a fixed IP address for each virtual machine on the LAN segment.
If you convert a team that was created in an earlier version of Workstation Pro, the LAN segment that was
configured for the team appears in the LAN segment drop-down menu for each virtual machine.
You can click LAN Segments to create new LAN segments or delete and rename existing LAN segments.
Deleting a LAN segment disconnects all virtual network adapters that are configured for that LAN segment.
When you delete a LAN segment, you must manually configure its disconnected virtual network adapter to
reconnect the virtual machine to the network.
Configuring Virtual Network Adapter Advanced Settings
You can use the advanced virtual network adapter settings to limit the bandwidth and specify the acceptable
packet loss percentage for incoming and outgoing data transfers.
To configure advanced virtual network adapter settings for a selected virtual machine, select VM > Settings,
click the Hardware tab, select the virtual network adapter, and click Advanced.
Note You cannot configure advanced virtual network adapter settings for a shared or remote virtual
machine.
VMware, Inc.
269
Using VMware Workstation Pro
Table 13‑6. Virtual Network Adapter Advanced Settings
Setting
Description
Bandwidth and Kbps
To limit incoming or outgoing data transfers to the data transfer rate for a
specific network connection type, select the network connection type from the
Bandwidth drop-down menu. The value in the Kbps text box changes to the
data transfer rate, in kilobits per second, of the network connection type that you
select. For example, if you select Leased Line T1 (1.544 Mbps), the value in the
Kbps text box changes to 1544.
To limit incoming or outgoing data transfers to a specific data transfer rate,
select Custom and type the data transfer rate in kilobits per second in the Kbps
text box.
The default bandwidth setting for both incoming and outgoing data transfers is
Unlimited.
Packet Loss (%)
The acceptable packet loss percentage for incoming or outgoing data transfers.
The default setting is 0.0%.
MAC Address
To assign a new MAC address to the network adapter, either type a new address
in this text box or click Generate to have Workstation Pro generate a new
address.
Configuring USB Controller Settings
You can configure whether a USB controller supports isochronous USB and Bluetooth devices, when to
connect new USB devices to the host system, and whether human interface devices (HIDs) appear in the
Removable Devices menu.
Note You typically cannot configure USB controller settings for a shared or remote virtual machine.
To configure USB controller settings for a selected virtual machine, select VM > Settings, click the Hardware
tab, and click USB Controller.
Table 13‑7. USB Controller Settings
Setting
Description
USB Compatibility
Selecting USB 2.0 or 3.0 enables support for isochronous USB
devices, including Web cams, speakers, and microphones.
Automatically connect new USB devices
Connect new USB devices to the virtual machine. If this setting is
not selected, new USB devices are connected only to the host
system.
Show all USB input devices
Human interface devices (HIDs), such as USB 1.1 and 2.0 mouse
and keyboard devices, appear in the Removable Devices menu.
Icons for HIDs appear in the status bar. An HID that is connected
to the guest operating system is not available to the host system.
The virtual machine must be powered off when you change this
setting.
Share Bluetooth devices with the virtual machine
Enable support for Bluetooth devices.
To connect or disconnect USB devices while a virtual machine is running, select the virtual machine and
select VM > Removable Devices. With the two-port USB controller, you can connect to both USB 1.1 and
USB 2.0 devices.
Important Before you unplug a USB device or select a removable device to disconnect a USB device from
a virtual machine, follow the device manufacturer's procedures for safely unplugging the device from a
physical computer.
270
VMware, Inc.
Chapter 13 Configuring Virtual Machine Hardware Settings
Configuring Sound Card Settings
You can configure when a sound card is connected to a virtual machine. You can also configure whether a
virtual machine uses a specific sound card or the default sound card in the host system.
To configure sound card settings for a selected virtual machine, select VM > Settings, click the Hardware
tab, and click Sound Card.
Note You cannot change sound card settings for a remote virtual machine.
Table 13‑8. Sound Card Settings
Setting
Description
Connected
Connect the sound device while the virtual machine is running.
Connect at power on
Connect the sound device when you power on the virtual machine.
Use default host sound card
Make the virtual machine use the default sound card in the host system.
Specify host sound card
(Windows hosts only) Select a specific host sound card for the virtual machine to
use.
Use physical sound card
(Linux hosts only) Select a specific host sound card to for the virtual machine to
use.
Enable Echo Cancellation
Enable echo cancellation for the sound card.
Configuring Parallel Port Settings
You can configure when a parallel port is connected to a virtual machine and whether to send output to a
physical port or to a file on the host system.
To configure parallel port settings for a selected virtual machine, select VM > Settings, click the Hardware
tab, and select the parallel port.
Table 13‑9. Parallel Port Settings
Setting
Description
Connected
Connect the port while the virtual machine is running.
Connect at power on
Connect the port when you power on the virtual machine.
If the guest operating system cannot access the parallel port device when
you power on the virtual machine, deselect this setting. You can use the
Removable Devices menu to enable access to the parallel port after the
virtual machine is powered on.
Use a physical parallel port
Select a host parallel port for the virtual machine to use.
Use output file
Send output from the virtual parallel port to a file on the host system.
Either locate an existing output file or browse to a directory and type a
filename to create a new output file.
Configuring Serial Port Settings
You can configure when a serial port is connected to a virtual machine. You can also configure whether to
send output to a physical port or to a file on the host system, set up a direct connection between two virtual
machines, and specify whether the guest operating system uses the port in polled mode.
To configure serial port settings for a selected virtual machine, select the virtual machine, select VM >
Settings, click the Hardware tab, and select the serial port.
VMware, Inc.
271
Using VMware Workstation Pro
Table 13‑10. Serial Port Settings
Setting
Description
Connected
Connect the port while the virtual machine is running.
Connect at power on
Connect the port when you power on the virtual machine.
Use a physical serial port
Select a host serial port.
Use output file
Send output from the virtual serial port to a file on the host system.
Either locate an existing output file or navigate to the desired
directory and type a filename for the file to create.
Use named pipe or Use socket (named pipe)
Set up a direct connection between two virtual machines or a
connection between a virtual machine and an application on the host
system.
Yield CPU on poll
The guest operating system uses the port in polled mode rather than
interrupt mode. It yields processor time if its only task is to poll the
virtual serial port.
If the guest operating system uses the serial port in interrupt mode,
do not select this setting.
Note This setting is useful for developers who are using debugging
tools that communicate over a serial connection. Selecting this setting
can improve performance when the guest operating system uses the
serial port in polled mode.
Configuring Generic SCSI Device Settings
You can configure when a generic SCSI device is connected to a virtual machine, specify the physical SCSI
device to connect to on the host system, and select the SCSI identifier to use for the drive.
To configure generic SCSI device settings for a selected virtual machine, select VM > Settings, click the
Hardware tab, and select the generic SCSI device.
Note You cannot configure a generic SCSI device for a shared or remote virtual machine.
Table 13‑11. Generic SCSI Device Settings
Setting
Description
Connected
Connect the device while the virtual machine is running.
Connect at power on
Connect the device when you power on the virtual machine.
Specify the physical SCSI device to connect to
Select a host SCSI device.
(Windows hosts) Select a device. The menu shows the SCSI
devices that are available on the host system.
(Linux hosts) Type the name of the /dev/sg entry for the device
to install in the virtual machine. For example, if the device is
named sga, type /dev/sga.
Virtual device node
Select the SCSI device identifier to use for the drive. For
example, if you select SCSI 0:2, the guest operating system sees
the drive as ID 2 on controller 0.
The virtual machine must be powered off when you change this
setting.
Note For specific Windows guest operating systems, you might need to perform additional configuration
steps to use a generic SCSI device.
272
VMware, Inc.
Chapter 13 Configuring Virtual Machine Hardware Settings
Configuring Printer Settings
You can configure when a printer is connected to a virtual machine.
To configure printer settings for a selected virtual machine, select VM > Settings, click the Hardware tab,
and select Printer.
Table 13‑12. Printer Settings
Setting
Description
Connected
Connect the printer while the virtual machine is running.
Connect at power on
Connect the printer when you power on the virtual machine.
Configuring Display Settings
You can specify monitor resolution settings, configure multiple monitors, and select accelerated graphics
capabilities for a virtual machine.
To configure display settings for a virtual machine, select the virtual machine, select VM > Settings, click the
Hardware tab, and select Display (local virtual machine) or Video card (shared or remote virtual machine).
Note Only Workstation 6.x and later virtual machines support specifying resolution settings and setting
the number of monitors that the guest operating system can use.
Table 13‑13. Display Settings
Setting
Description
Accelerate 3D graphics
Select this setting if you run applications that use DirectX 9 or DirectX 10
accelerated graphics. Accelerated graphics capabilities apply to Windows
XP or later guests on hosts running Windows or Linux.
The virtual machine must be a Workstation 6.x or later virtual machine
and must have VMware Tools installed from Workstation 7.x or later.
Use host setting for monitors
When you select this setting, the SVGA driver uses two monitors, a
maximum bounding box width of 3840, and a maximum bounding box
height of 1920. The virtual machine is configured to have a minimum of
two 1920x1200 monitors, in a side-by-side topology, in both normal and
rotated orientations. If the host system has more than two monitors, the
virtual machine uses the number of monitors on the host system instead.
If the host system's bounding box is wider or taller than the defaults, the
virtual machine uses the larger size. You should select this setting in most
cases.
Specify monitor settings
Set the number of monitors that the virtual machine will see, regardless of
the number of monitors on the host system. This setting is useful if you
use a multimonitor host system and you need to test in a virtual machine
that has only one monitor. It is also useful if you are developing a
multimonitor application in a virtual machine and the host system has
only one monitor. After you power on the virtual machine, the guest
operating system sees the number of monitors that you specified. Select a
resolution from the list or type a setting that has the format width x height,
where width and height are the number of pixels.
Note You cannot configure the resolution setting for a shared or remote
virtual machine.
Graphics memory
Select the maximum amount of guest memory that can be used for
graphics memory using the drop down menu. The default value of video
memory varies by guest OS.
Display Scaling
Enables display scaling for the virtual machine display. The user interface
is automatically adjusted when the display changes.
VMware, Inc.
273
Using VMware Workstation Pro
Installing a Guest Operating System on a Physical Disk or Unused
Partition
You can install a guest operating system directly on a physical disk or unused partition on the host system.
A physical disk directly accesses an existing local disk or partition. You can use physical disks to run one or
more guest operating systems from existing disk partitions.
Workstation Pro supports physical disks up to 2 TB capacity. Booting from an operating system already set
up on an existing SCSI disk or partition is not supported.
Running an operating system natively on the host system and switching to running it inside a virtual
machine is similar to pulling the hard drive out of one computer and installing it in a second computer that
has a different motherboard and hardware. The steps you take depend on the guest operating system in the
virtual machine. In most cases, a guest operating system that is installed on a physical disk or unused
partition cannot boot outside of the virtual machine, even though the data is available to the host system.
See the Dual-Boot Computers and Virtual Machines technical note on the VMware Web site for information
about using an operating system that can also boot outside of a virtual machine.
After you configure a virtual machine to use one or more partitions on a physical disk, do not modify the
partition tables by running fdisk or a similar utility in the guest operating system. If you use fdisk or a
similar utility on the host operating system to modify the partition table of the physical disk, you must
recreate the virtual machine physical disk. All files that were on the physical disk are lost when you modify
the partition table.
Important You cannot use a physical disk to share files between the host system and a guest operating
system. Making the same partition visible to both the host system and a guest operating system can cause
data corruption. Instead, use shared folder to share files between the host system and a guest operating
system.
274
VMware, Inc.
Using the Virtual Network Editor
14
You can use the virtual network editor to view and change key networking settings, add and remove virtual
networks, and create custom virtual networking configurations. The changes that you make in the virtual
network editor affect all virtual machines running on the host system.
On a Windows host, any user can view network settings, but only Administrator users can change them. On
a Linux host, you must enter the root password to access the virtual network editor.
On Windows hosts, select Edit > Virtual Network Editor to start the virtual network editor in
Workstation Pro. You can also select Start > Programs > VMware > Virtual Network Editor to start the
virtual network editor from the host operating system.
On Linux hosts, select Applications > System Tools > Virtual Network Editor to start the virtual network
editor. The menu path might be different for your version of Linux. You can also start the network editor
from the command line by using the vmware-netcfg command.
Important When you click Restore Default to restore the default network settings, all changes that you
made to network settings after you installed Workstation Pro are permanently lost. Do not restore the
default network settings when a virtual machine is powered on as this might cause serious damage to the
bridged networking.
This chapter includes the following topics:
n
“Add a Bridged Virtual Network,” on page 276
n
“Add a Host-Only Virtual Network,” on page 277
n
“Change Automatic Bridging Settings,” on page 278
n
“Change NAT Settings,” on page 278
n
“Change DHCP Settings on a Windows Host,” on page 280
VMware, Inc.
275
Using VMware Workstation Pro
Add a Bridged Virtual Network
If you installed Workstation Pro on a host system that has multiple network adapters, you can configure
multiple bridged networks.
By default, virtual switch VMnet0 is mapped to a bridged network. You can create a custom bridged
network on virtual switches VMnet2 to VMnet7. On Windows, you can also use VMnet19. On Linux, you
can also use vmnet10 through vmnet255.
Important If you reassign a physical network adapter to a different virtual network, any virtual machine
that used the original network is no longer bridged to the external network through that virtual network
and you must change the setting for each affected virtual machine network adapter individually. This
restriction can be especially problematic if the host system has only one physical network adapter and you
reassign it to a virtual network other than VMnet0. Even though the virtual network appears to bridge to an
automatically chosen adapter, the only adapter it can use was assigned to a different virtual network.
Prerequisites
n
Familiarize yourself with bridged networking. See “Configuring Bridged Networking,” on page 267 for
more information.
n
Verify that a physical network adapter is available on the host system. By default, the VMnet0 virtual
switch is set to use automatic bridging mode and bridges to all active physical network adapters on the
host system. You can make a physical network adapter available by restricting the physical network
adapters that are bridged to VMnet0. See “Change Automatic Bridging Settings,” on page 278 for more
information.
Procedure
1
Select Edit > Virtual Network Editor.
2
Click Add Network.
3
Select a virtual switch.
Workstation Pro assigns a subnet IP address to the virtual network adapter.
276
4
Select the new virtual network from the list and select Bridged (connect VMs directly to the external
network).
5
From the Bridged to menu, select a physical adapter on the host system to bridge to.
Option
Description
Automatic
Workstation Pro automatically bridges the virtual network to all active
physical network adapters on the host system. The choice of which adapter
to use is arbitrary.
physical_adapter
Bridge to a specific physical network adapter on the host system.
6
(Optional) If you selected automatic bridging mode and you want to place restrictions on the physical
adapters that the virtual network adapter bridges to, click Automatic Settings and deselect one or more
physical adapters.
7
Click OK to save your changes.
VMware, Inc.
Chapter 14 Using the Virtual Network Editor
Add a Host-Only Virtual Network
You can use the virtual network editor to set up multiple host-only virtual networks.
On Windows and Linux host systems, the first host-only network is set up automatically when you install
Workstation Pro. You might want to set up multiple host-only networks on the same computer in the
following situations.
n
To have two virtual machines connected to one host-only network, and other virtual machines
connected to another host-only network to isolate the network traffic on each network.
n
To test routing between two virtual networks.
n
To test a virtual machine that has multiple network interface cards, without using any physical network
adapters.
Prerequisites
Familiarize yourself with host-only networking. See “Configuring Host-Only Networking,” on page 268 for
more information.
Procedure
1
Select Edit > Virtual Network Editor.
2
Click Add Network.
3
Select a virtual switch.
On Windows and Linux hosts, the VMnet1 virtual switch is mapped to a host-only network by default.
Workstation Pro assigns a subnet IP address to the virtual network.
4
Select the new virtual network from the list and select Host-only (connect VMs internally on a private
network).
5
(Optional) To connect a physical network on the host system to the network, select Connect a host
virtual adapter to this network.
6
(Optional) To use a local DHCP service to distribute IP addresses to virtual machines on the network,
select Use local DHCP service to distribute IP addresses to VMs.
7
(Optional) (Windows hosts only) To customize DHCP settings if the network uses a local DHCP service,
click DHCP Settings.
8
(Optional) To change the subnet IP address or subnet mask, modify the addresses in the Subnet IP and
Subnet mask text boxes.
9
Click OK to save your changes.
VMware, Inc.
277
Using VMware Workstation Pro
Change Automatic Bridging Settings
When automatic bridging mode is configured, you can restrict the physical network adapters that a virtual
switch bridges to.
Procedure
1
2
Start the virtual network editor on the host system.
Option
Description
Windows host
Select Edit > Virtual Network Editor.
Linux host
Select Applications > System Tools > Virtual Network Editor. The menu
path might be different for your version of Linux. You can also start the
network editor from the command line by using the vmware-netcfg
command.
Select the bridged network, and click Automatic Settings.
By default, a virtual switch bridges to all active network adapters on the host system when it is
configured for automatic bridging. The choice of which adapter to use is arbitrary.
To prevent a virtual switch from bridging to a particular physical network adapter, deselect the check
box for that host network adapter.
Change NAT Settings
You can change the gateway IP address, configure port forwarding, and configure advanced networking
settings for NAT networks.
Prerequisites
n
Determine whether you are going to use the host virtual network adapter. The host system uses
VMware Network Adapter VMnet1 to connect to the host-only network and it uses VMware Network
Adapter VMnet8 to connect to the NAT network.
n
On a Windows host, log in as an Administrator user. Only an Administrator user can change network
settings in the virtual network editor.
n
On a Linux host, log in as root. You must enter the root password to use the virtual network editor.
Procedure
1
2
Start the virtual network editor on the host system.
Option
Description
Windows host
Select Edit > Virtual Network Editor.
Linux host
Select Applications > System Tools > Virtual Network Editor. The menu
path might be different for your version of Linux. You can also start the
network editor from the command line by using the vmware-netcfg
command.
Select the NAT network, and click NAT Settings.
By default, the NAT device is connected to the VMnet8 virtual switch. You can have only one NAT
virtual network.
278
VMware, Inc.
Chapter 14 Using the Virtual Network Editor
Table 14‑1. NAT Settings
Setting
Description
Gateway IP
The gateway IP address for the selected network.
Port Forwarding
Add a port for port forwarding. With port forwarding, incoming TCP or UDP
requests are sent to a specific virtual machine on the virtual network that is
served by the NAT device.
Host port
The number of the incoming TCP or UDP port. For
example, incoming HTTP requests are usually on port
80.
Virtual machine
IP address
The IP address of the virtual machine to which you
want to forward the incoming requests.
Virtual machine
port
The port number to use for requests on the specified
virtual machine. It may be the standard port, such as
80 for HTTP, or a nonstandard port if software
running in the virtual machine is configured to accept
requests on a nonstandard port.
Description
(Optional) You can use this text box to identify the
forwarded service, for example, HTTP.
To change settings for an existing port, select its name and click Properties.
Allow active FTP
Allow only passive mode FTP over the NAT device.
Allow any Organizationally
Unique Identifier
Select this setting if you change the organizationally unique identifier (OUI)
portion of the MAC address for the virtual machine and subsequently cannot
use NAT with the virtual machine.
UDP timeout (in seconds)
Select the number of minutes to keep the UDP mapping for the NAT.
Config port
Select the port to use to access status information about NAT.
Important Change this value only under the direction of VMware technical
support.
Enable IPv6
Enable NAT to use an IPv6 address.
IPv6 Prefix
If IPv6 is enabled, enter the IPv6 prefix that the NAT device uses.
DNS Settings
(Windows hosts only) Configure the DNS servers for the virtual NAT device to
use.
NetBios Settings
VMware, Inc.
Auto detect
available DNS
servers
Select this option to detect the available DNS servers.
To add a DNS server to the list, deselect this check box
and enter the IP address of the preferred and alternate
DNS servers in the Preferred DNS server text boxes.
Policy
If you have multiple DNS servers, select the strategy
for choosing which server to send a request to. Order
sends one DNS request at a time in order of the name.
Rotate sends one DNS request at a time and rotates
through the DNS servers. Burst sends to three servers
and waits for the first server to respond.
Timeout (sec)
Select the number of seconds to keep trying if the NAT
device cannot connect to the DNS server.
Retries
Select the number of retries.
(Windows hosts only) Select NBNS (NetBIOS Name Service) and NBDS
(NetBIOS Datagram Service) timeouts and retry settings.
279
Using VMware Workstation Pro
Change DHCP Settings on a Windows Host
On a Windows host, you can change the range of IP addresses and the duration of DHCP licenses for NAT
and host-only networks that use a DHCP service to distribute IP addresses.
Procedure
1
Select Edit > Virtual Network Editor.
2
Select the NAT or host-only network, and click DHCP Settings
Table 14‑2. DHCP Settings
280
Setting
Description
Start IP address and End IP address
The range of IP addresses that the virtual DHCP service provides on the
selected virtual network.
Default lease time and Max lease time
Select the duration of the DHCP leases that the DHCP service provides
to clients on the virtual network.
VMware, Inc.
Running the Support Script
15
VMware technical support might ask you to run the support script to gather information from the host
system or virtual machines running on the host system. For example, if a virtual machine exits abnormally
or fails, you can run the support script to collect the appropriate log files and system information. You can
run the support script from Workstation Pro, from a Windows command prompt, or from a Linux terminal
window.
Note The support script collects local data only. It does not collect data for remote hosts or for virtual
machines running on remote hosts.
To collect diagnostic information for VMware Tools, you must edit the tools.conf file. See the VMware
knowledge base article at http://kb.vmware.com/kb/1010744 for more information.
This chapter includes the following topics:
n
“Register and Create a Support Request,” on page 281
n
“Run the Support Script from Workstation Pro,” on page 282
n
“Run the Support Script from a Windows Command Prompt,” on page 282
n
“Run the Support Script from a Linux Terminal Window,” on page 283
Register and Create a Support Request
To report problems to VMware support, you create a support request.
Prerequisites
Locate your Workstation Pro license key. The license key is sent to you in an email message when you
register.
Procedure
1
If you do not have a VMware account, select Help > Enter License Key > Register and follow the
instructions on the Web site.
2
Select Help > Support > Submit Support Request to create a support request.
VMware, Inc.
281
Using VMware Workstation Pro
Run the Support Script from Workstation Pro
You can run the support script from Workstation Pro to collect support data from the local host system or
from the local host system and selected virtual machines running on the local host system.
On a Linux host, the script displays messages that indicate that it cannot collect some information because
you are not logged in as root. If VMware technical support needs this information, a support representative
will ask you to run the script from a terminal window as root. See “Run the Support Script from a Linux
Terminal Window,” on page 283.
Prerequisites
n
Create a support request. See “Register and Create a Support Request,” on page 281.
n
Increase the level of logging. See “Gathering Debugging Information,” on page 256.
n
If you plan to collect support data from specific virtual machines, verify that the latest version of
VMware Tools is installed and power on the virtual machines.
Procedure
1
On the host system, select Help > Support > Collect Support Data in Workstation Pro.
Option
Description
To collect data from the host
system and a virtual machine
Select the virtual machine and click Collect. You can select multiple virtual
machines.
To collect data only from the host
system
Deselect all virtual machines and click Collect.
On a Windows host, the support script creates a .ZIP file of the collected data and displays the file in an
open Windows Explorer window. Choose a directory location for the .ZIP file. On a Linux host, the
support script creates a compressed .TGZ file in your home directory.
2
Add the .ZIP or .TGZ file to your support request.
Run the Support Script from a Windows Command Prompt
On a Windows host system, you can run the support script from the Windows command prompt to collect
support data from the local host system.
Prerequisites
n
Create a support request. See “Register and Create a Support Request,” on page 281
n
Increase the level of logging. See “Gathering Debugging Information,” on page 256.
Procedure
1
Open a command prompt on the Windows host system and change to the VMware Workstation
directory.
For example: cd C:\Program Files\VMware\VMware Workstation
2
Run the support script.
cscript vm-support.vbs
The script displays the name of the directory where it stores its output.
282
3
Use a file compression utility to compress the script output directory.
4
Include the zip file of the script output directory with your support request.
VMware, Inc.
Chapter 15 Running the Support Script
5
If you are reporting a problem that occurred during Workstation Pro installation, include the
installation log file (VMInst.log) with your support request.
The installation log file is located in the Temp directory. On a Windows host, the default location is
C:\Documents and Settings\username\Local Settings\temp.
Run the Support Script from a Linux Terminal Window
On a Linux host system, you can run the support script from a Linux terminal window to collect support
data from the local host system.
If you do not run the support script as root, the script displays messages that indicate that it cannot collect
some information. If the VMware support team needs this information, a support representative will ask
you to run the script as root.
Prerequisites
n
Create a support request. See “Register and Create a Support Request,” on page 281
n
Increase the level of logging. See “Gathering Debugging Information,” on page 256.
Procedure
1
On the Linux host system, open a terminal window and run the support script as root or as the user
who is running the virtual machine.
vm-support
The script creates a compressed .TGZ file in the user’s home directory.
2
Include the .TGZ file with your support request.
3
If you are reporting a problem that occurred during Workstation Pro installation, include the
installation log file with your support request.
VMware, Inc.
283
Using VMware Workstation Pro
284
VMware, Inc.
Using the vmware Command
16
You can use the vmware command to run Workstation Pro from the command line on a Linux or Windows
host system.
This chapter includes the following topics:
n
“Run the vmware Command,” on page 285
n
“Incorporate Workstation Pro Startup Options in a Windows Shortcut,” on page 286
Run the vmware Command
You can run the vmware command on a Linux or Windows host system. You can type the command in a
Linux terminal window or at the Windows command prompt. You can also create scripts to run multiple
commands.
Prerequisites
Familiarize yourself with the vmware command options. See “vmware Command Options,” on page 285.
Procedure
n
To run the vmware command on a Linux host system, use the following syntax.
/usr/bin/vmware [-n] [-x] [-X] [-t] [-q] [-s variable_name = value ] [-v] [ path_to_vm .vmx]
[http[s]:// path_to_vm .vmx] [X toolkit options]
n
To run the vmware command on a Windows host system, use the following syntax.
C:\Program Files\VMware\VMware Workstation\vmware.exe [-n] [-x] [-X] [-t] [-q] [-s
variable_name = value ] [-v] [ path_to_vm .vmx] [http[s]:// path_to_vm .vmx]
vmware Command Options
When you run the vmware command, you can specify certain options.
Table 16‑1. vmware Command Options
Option
Description
-n
Opens a new Workstation Pro window.
-t
Opens a virtual machine in a new tab in the existing Workstation Pro window.
-x
Powers on the virtual machine when Workstation Pro starts. This option is
equivalent to clicking Power On in the Workstation Pro toolbar.
-X
Powers on the virtual machine and switches the Workstation Pro window to
full screen mode.
VMware, Inc.
285
Using VMware Workstation Pro
Table 16‑1. vmware Command Options (Continued)
Option
Description
-q
Closes the virtual machine tab when the virtual machine powers off. If no
other virtual machine is open, it also exits Workstation Pro. This option is
useful when the guest operating system can power off the virtual machine.
-s
Sets the specified variable to the specified value. You can specify at the
command line any variable names and values that are valid in the
configuration file.
-v
Displays the product name, version, and build number.
path_to_vm.vmx
Launches a virtual machine by using the specified virtual machine
configuration (.vmx) file.
On Linux hosts, you can pass X toolkit options as arguments, such as --display and --geometry. Some
options, such as the size and title of the Workstation Pro window, cannot be overridden.
Incorporate Workstation Pro Startup Options in a Windows Shortcut
The most convenient way to use vmware command options is to incorporate them into the command that a
Windows shortcut generates.
Prerequisites
Familiarize yourself with the vmware command options. See “vmware Command Options,” on page 285.
Procedure
1
Right-click the Workstation Pro shortcut and select Properties.
2
In the Target text box, add any options to use after the vmware.exe command and enclose the entire
command string in quotation marks.
For example:
"C:\Program Files\VMware\VMware Workstation\vmware.exe -X
C:\Documents and Settings\username\My Documents\My Virtual Machines\Windows Me\Windows
Me.vmx"
286
VMware, Inc.
Index
A
accelerated 3D graphics
preparing a virtual machine 120
preparing the host system 119
acceleration, disabling 112
ACPI S1 sleep feature 80
Administrator default role 224
Advanced Linux Sound Architecture 15
advanced options 256
Aero Peek thumbnails 234
ALSA
configuring virtual machines 123
giving a user permission 122
overriding the library version 122
using 122
appliance view 255
autofit settings 237
Autologin 255
Autologon, configuring 75
automatic bridging settings 278
AutoProtect snapshots, enabling 108
AutoProtect feature 251
Autorun feature 244
B
background settings, configuring 78
bandwidth, configuring 180
batch power operations 103, 234
battery information 97
BIOS, virtual machine support 16
boot from EFI 257
bridged networking
assigning IP addresses 182
configuring 181–183
C
CD-ROM drives
adding 143
configuring 143
configuring legacy emulation mode 145
changing settings 186, 278
chip sets, virtual machine support 16
cleaning up virtual disks 137
clones
creating 54, 56
VMware, Inc.
full 55
linked 55
closing virtual machines 77
command line options, installing Workstation Pro
on Linux 27
converting teams 104
copy and paste feature
disabling 82
restrictions 81
using 81
CPUs, host requirements 13
creating virtual machines 39
Creative Labs Sound Blaster 18
Ctrl+Alt, using in a key combination 166
cursor settings 235
custom configuration, virtual machine 40
custom networking 269
D
DDNS 198
debugging, using serial connection 138
debugging information 256
deleting, virtual machines 113
device settings 244
devices, configuring and managing 143
DHCP
changing settings 200
DHCPD 198
editing the configuration file 201
DHCP server, NAT 185
DHCP settings 280
disk drives
cleaning up 137
host requirements 15
virtual machine support 17
disk modes, configuring 47
disk node and mode settings 264
disk types 47
display settings, configuring 118
display preferences 236
displays
changing 96
changing settings 273
configuring preference settings 117
287
Using VMware Workstation Pro
host requirements 14
resizing 100
download components 63
downloading virtual machines 221
drag-and-drop feature
disabling 81
restrictions 81
using 80
drawing tablets, virtual machine support 18
DVD drives
adding 143
configuring 143
configuring legacy emulation mode 145
E
Easy Install, responding to prompts 42, 51
Eclipse, installing 23
ECR errors, troubleshooting 158
EFI support 43, 76
encryption
changing the password 127
limitations 124
removing 126
virtual machine 123, 125
enhanced virtual keyboard, installing the
driver 165
Ethernet cards, virtual machine support 18
exclusive mode 98
exit behavior 232
expiration date, timestamp 126
exporting OVF files 137
F
files, virtual machine 71
floppy drives
adding 144
configuring 143
virtual machine support 17
folders
creating 103
managing virtual machines 102
removing virtual machines 103
FreeBSD guest operating system, VMware Tools
installation or upgrade (tar installer) 69
full screen mode 97
full screen settings 237
G
general option settings 247
generic SCSI devices
adding 161
avoiding concurrent access problems on
Linux 162
288
configuring 161
troubleshooting detection problems 162
glossary 7
graphics, virtual machine support 16
guest isolation 252
guest operating systems
changing 248
installing manually 52
selecting 41
supported 16
H
hard disk, cleanup 137
hard power controls 115
hardware
adding to virtual machines 259
customizing 50
removing from virtual machines 261
hardware compatibility, changing 32, 136
hardware compatibility setting
selecting in the New Virtual Machine
wizard 41
setting 233
hardware settings, modifying 173
HD Audio 18
host-only networks
adding 182, 194
avoiding packet leakage 197
configuring 193, 195
host-only networking 268, 277
hot keys
changing combinations 166, 236
changing for Unity mode 167
default combinations 38
human interface devices, connecting 92
I
I/O controller types 45
IDE 45
IDE drives
host requirements 15
virtual machine support 17
importing virtual machines 59
Input preferences 234
input problems 235
install components 63
installation properties 25
installation restrictions 22
installing VMware Tools
FreeBSD (tar installer) 69
Linux (tar installer) 66
Microsoft Windows 65
NetWare (tar installer) 68
VMware, Inc.
Index
process overview 61
Solaris (tar installer) 68
installing Workstation Pro
Linux host 26
unattended installation on Windows host 24
Windows host 23
Intel High-Definition Audio 18
intended audience 7
IP addresses, assigning 199, 202
K
key code mappings, configuring 169
key mappings, changing 168
keyboard features, configuring 164
keyboard settings 235
keyboard shortcuts 166, 236
keysyms
defined 168
mapping 169
L
LAN segments
configuring 203
configuring virtual machines to use 203
creating 203
deleting 204
language codes 133
license key, obtaining 21
linked clones, moving 129
Linux guest, VMware Tools installation or
upgrade (tar installer) 66
local area networking, host requirements 15
lock files 153
M
MAC addresses
assigning manually 206
changing 206
mapped drives 88
maximum virtual disk size 49
memory
host requirements 14
virtual machine allocation 16
memory allocation 44
memory preference settings 242
memory settings 243, 261
memory trimming 257
menu settings 237
Microsoft Windows guest operating system,
VMware Tools installation or
upgrade 65
monitor settings 273
monitors, using multiple 99, 100
mouse settings 235
VMware, Inc.
mouse types, virtual machine support 18
moving virtual machines
considerations 129
new location or host 128
N
naming virtual machines 248
NAT
configuration file sections 188
configuring 184, 268
editing the configuration file 188
external access 186
features and limitations 185
sample Linux configuration file 190
specifying connections from ports below
1024 192
using NetLogon 191, 192
NAT device, understanding 185
NetLogon 191
NetWare guest operating system, VMware Tools
installation or upgrade (tar installer) 68
network
changing the configuration 177
virtual network editor 179
network configuration example 207, 208
network connection types 45, 267
networking components, understanding 175
networking configurations, common 176
New Virtual Machine wizard 50, 252
No Access default role 224
O
online help, using 38
operating systems
host supported 14
OS upgrades on Windows hosts 22
optical drives supported in host 15
OVA format virtual machines 59
OVF files, exporting virtual machines 137
OVF format virtual machines 59
P
packet forwarding, disabling 197
packet leakage, host-only networks 197
packet loss 269
packet loss percentage, configuring 180
parallel ports
configuring 156, 157
configuring device permissions 158
configuring on Linux 2.6.x kernels hosts 157
virtual machine support 17
passwords for encrypting and restricting virtual
machines 123, 125
pause feature restrictions 78
289
Using VMware Workstation Pro
pausing virtual machines 78
PDAs, installing drivers 92
permissions
adding 228
changing 229
removing 229
understanding 227
physical machines
preparing for virtualization 58
virtualizing 57
physical disks
adding to an existing virtual machine 155
preparing to use 47, 154
using in a virtual machine 154
power controls 249
power off behavior, configuring 115
power on delay 104, 234
power options
changing 249
configuring 249
powering off virtual machines 77
preference settings 231
printers
changing settings 273
using host printers in a virtual machine 89
priority preferences 243
process priorities 243, 256
processors
configuring 261
host requirements 13
specifying number 44
supported in virtual machines 16
using a virtual machine that has more than
sixteen 164
promiscuous mode 205
R
RAM, host requirements 14
Read Only default role 224
remote access
configuring 211, 212
enabling 241
remote servers
connecting 214
disabling the prompt to save login
information 215
disconnecting 216
downloading virtual machines from 221
removing saved login information 215
remote hosts, saving login information 234
removable devices, using in virtual machines 90
repairing VMware Tools installations 70
reserved memory 242
290
resizing
Linux guests 101
Solaris guests 101
restricted virtual machine, expiration date 126
restriction password 126
restrictions password 123, 125
resuming virtual machines 79
roles
changing 225
cloning 226
creating 225
default 224
removing 227
using to assign privileges 224
routing
between host-only networks 195
controlling on host-only networks 198
S
Samba
adding user passwords 204
configuring 204
on both bridged and host-only networks 205
SATA 45
SATA drives 15
screen colors, setting for virtual machines 121
screen resolutions, working with
nonstandard 102
screenshots, creating for virtual machines 112
SCSI 45
SCSI devices, virtual machine support 17
SCSI drives, host requirements 15
serial ports
changing the input speed 160
configuring 156, 159
using to debug applications 138, 139
virtual machine support 17
shared files, optimizing read and write
access 86
shared folders
changing 87
changing properties 87
configuring 83
created by other users 85
disabling 87
enabling all folders by default 233
mounting 85
supported guest operating systems 83
using 82
using permissions to restrict access 86
viewing in Windows 85
shared virtual machines
configuring 216
configuring autostart 223
VMware, Inc.
Index
configuring where files are located 241
converting to standard virtual machines 219
creating 217
creating on remote hosts 222
directory 43, 213
viewing status 219
shared virtual machines directory, default
location 211
silent installation, Windows host 24
smart card readers, switching on Linux hosts 96
smart cards
disabling sharing 95
using in virtual machines 94, 95
snapshot manager, using 106
snapshots
background 244
configuring options 250
deleting 110
enabling AutoProtect 108
enabling background 109
excluding virtual disks 109
power-off options 108
reverting 108
taking 105, 107
troubleshooting 110, 111
using 106
soft power controls 115
software updates
automatic 239
configuring 238
configuring automatic 238
configuring a proxy server 239
Solaris, resizing guests 101
Solaris guest operating system, VMware Tools
installation or upgrade (tar installer) 68
solid-state drives 15
sound, virtual machine support 18
sound cards 271
SSD 15
SSL certificates, replacing 213
starting background virtual machines 75
starting virtual machines 73, 74
starting Workstation Pro 34
status bar 36
stopping virtual machines 76
subnet IP addresses, changing 200, 201
support script
overview 281
running from a Linux terminal window 283
running from a Windows command
prompt 282
running from the Workstation Pro user
interface 282
suspending virtual machines 79
VMware, Inc.
system data 240
system requirements, host system 13
T
tar installer 66
teams 104
template mode, enabling 55
Template mode 257
thumbnail bar 36
thumbnails
configuring settings 234
managing virtual machines 102
using 103
time synchronization 253
toolbar settings 237
transferring files and text 80
Trial version 22
typical configuration, virtual machine 40
U
UEFI support 43, 76
unattended installation, installation properties 25
uninstalling VMware Tools 71
uninstalling Workstation Pro
Linux host 33
process 33
Windows host 33
Unity applications 236
Unity mode, setting preferences 121
Unity mode features 98
Unity mode options 254
updated information 9
upgrading VMware Tools
FreeBSD (tar installer) 69
Linux (tar installer) 66
Microsoft Windows 65
NetWare (tar installer) 68
process overview 62
Solaris (tar installer) 68
upgrading Workstation Pro
Linux host 30
preparation tasks 28
Windows host 22, 29
uploading virtual machines 219–221
usage statistics 240
USB controller
adding 146
configuring 145
USB devices
connecting 90
disabling autoconnect 91
enabling high-speed support for USB 2.0 or
3.0 147
291
Using VMware Workstation Pro
installing drivers 91
mounting on a Linux host 92
troubleshooting connection issues 93
understanding device control sharing 93
USB controller settings 270
USB ports, virtual machine support 18
User Experience Improvement Program 240
UUIDs
clones 54
configuring 131, 132
using 131
V
v-scan codes 170
vCPU
best use 44
specifying number 44
virtual disks
allocating disk space 48
changing settings 262
cleaning up 137
compacting 264
configuring in the New Virtual Machine
wizard 46
defragmenting 263
disconnecting from the host 89
expanding 263
mapping and mounting 88
SSD 15
virtual machine, expiration date 126
virtual machines
changing hardware compatibility 31, 135
configuring 115
configuring for compatibility 130
configuring power off behavior 115
deleting 113
downloading from a remote server 221
installing software 111
managing 115
moving 127
specifications 16
understanding 39
uploading to remote servers 219, 220
uploading to VMware vCloud Air 221
using 73
using the New Virtual Machine Wizard 40
virtual disk
bus type 49
controller type 49
maximum size 49
optimize behavior 15
virtual disk capacity 49
virtual disk files 49
292
Virtual Disk Manager 153
virtual hard disks
adding 149, 150
cleaning up 137
compacting 151
configuring 147
defragmenting 152
expanding 151
growing and allocating storage space 149
moving 154
removing 152
setting up as IDE or SCSI 148
using legacy 153
virtual machine library 35
virtual machine files
changing the default location 232
specifying in the New Virtual Machine
wizard 42
virtual machine options 247
virtual machine shortcut 54
virtual machines directory 43
virtual network adapter, changing 178
virtual network adapters
adding 178
configuring 266
connection settings 267
virtual network editor 275
virtual networking
configuring 175
virtual machine support 18
virtual printing 245
virtual symmetric multiprocessing,
configuring 163
virtualizing physical machines 57
Visual Studio, installing 23
VIX API 138
VM, expiration date 126
VM Creator default role 224
VM User default role 224
VMCI Sockets interface 138
VMnet
virtual network 175
virtual switch 175
vmware command
incorporating into a Windows shortcut 286
options 285
running 285
using 285
VMware Tools
configuring updates for virtual machines 253
installing 65
updating on a specific virtual machine 64
using 60
VMware, Inc.
Index
VMware account registration 281
VMware Tools installation
FreeBSD (tar installer) 69
Linux (tar installer) 66
Microsoft Windows 65
NetWare (tar installer) 68
process 61
Solaris (tar installer) 68
VMware Tools upgrade
FreeBSD (tar installer) 69
Linux (tar installer) 66
Microsoft Windows 65
NetWare (tar installer) 68
process 62
Solaris (tar installer) 68
VMware Workstation Server, understanding 211
VMware Workstation Player, using virtual
machines 129
vmware-user, starting manually 70
VNC client, connecting to a virtual machine 134
VNC client access 254
VNC connections, viewing 135
VNC server
configuring a virtual machine 132
specifying a language keyboard map 133
W
Windows activation problems 58
Windows authentication problems 58
Windows operating system upgrades 22
Windows Virtual PC virtual machines 60
Windows XP Mode virtual machine,
importing 59
working directory for virtual machine files 248
worksheet, typical virtual machine 40
Workspace preferences 231
Workstation Pro tabs 37
Workstation Pro window
customizing the view 37
performing virtual machine operations 35
using 34
Workstation Server, log files 141, 214
X
X server and keyboard mapping 167
x-key codes, defined 168
xFree86 and keyboard mapping 167
VMware, Inc.
293
Using VMware Workstation Pro
294
VMware, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising