1715-TD001 - Rockwell Automation
Technical Data
1715 Redundant I/O System Specifications
System Module, Catalog Numbers 1715-AENTR, 1715-IB16D, 1715-OB8DE,1715-IF16, 1715-OF8I
Base Unit, Catalog Numbers 1715-A2A, 1715-A3IO
Termination Assembly, Catalog Numbers 1715-TASIB16D, 1715-TADIB16D, 1715-TAS0B8DE, 1715-TADOB8DE, 1715-TASIF16,
1715-TADIF16, 1715-TASOF8, 1715-TADOF8
Accessory, Catalog Numbers 1715-N2S, 1715-N2T, 1715-C2
CH1 CH1 CH1 CH1
TERMINAL IDENTITY
CH1 CH1 CH1 CH1
AOTA
Dual.
Module Status
Redundancy Status
Network Status
Rack Status
Rack Status
Ethernet 1
Ethernet 2
Ethernet 1
Ethernet 2
Reset
Reset
CH1 CH1 CH1 CH1
CH1 CH1 CH1 CH1
CH1 CH1 CH1 CH1
AOTA
Dual.
Healthy
Ready
Run
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
TERMINAL IDENTITY
CH1 CH1 CH1 CH1
CH1 CH1 CH1 CH1
AOTA
Dual.
AOTA
Dual.
Healthy
Ready
Run
Healthy
Ready
Run
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
Channel 08
Channel 09
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 08
Channel 09
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
IO BASE
1715-A310
Module Status
Redundancy Status
Network Status
TERMINAL IDENTITY
CH1 CH1 CH1 CH1
TERMINAL IDENTITY
TERMINAL IDENTITY
CH1 CH1 CH1 CH1
CH1 CH1 CH1 CH1
CH1 CH1 CH1 CH1
CH1 CH1 CH1 CH1
AOTA
Dual.
AOTA
Dual.
Healthy
Ready
Run
Healthy
Ready
Run
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
Channel 08
Channel 09
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 08
Channel 09
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Healthy
Ready
Run
IO BASE
1715-A310
TERMINAL IDENTITY
Topic
Page
Conformal Coating Standards
2
1715-AENTR EtherNet/IP Adapter and 1715-A2A Module Base
3
1715-IB16D Digital Input Module, 1715-A3IO Module Base, and Termination Assemblies
6
1715-OB8DE Digital Output Module, 1715-A3IO Module Base, and Termination Assemblies
9
1715-IF16 Analog Input Module, 1715-A3IO Module Base, and Termination Assemblies
12
1715-OF8I Analog Output Module, 1715-A3IO Module Base, and Termination Assemblies
15
Additional Resources
18
1715 Redundant I/O System Specifications
Table 1 - 1715 Adapter and Module I/O Base Units
Attribute
1715-A2A
1715-A3IO
Modules supported
Required for 2 x 1715-AENTR modules
Supports:
• 1 I/O bus
• 8 I/O base units (1715-A3IO)
• 24 I/O modules
As many as 3 I/O modules
Weight, approx
283 g (9.98 oz)
220 g (7.76 oz)
Dimensions (H x W x D), approx
224 x 84 x 30 mm (8.82 x 3.31 x 1.18 in.)
233 x 126 x 18 mm (6.5 x 1.625 x 4.25 in.)
Table 2 - 1715 Termination Assemblies
Attribute
1715-TASIB16D, 1715-TADIB16D
1715-TASOB8DE, 1715-TADOB8DE
1715-TASIF16, 1715-TADIF16
1715-TASOF8, 1715-TADOF8
Modules supported
1715-IB16D
1715-OB8DE
1715-IF16
1715-OF8
Weight, approx
133 g (4.69 oz), 260 g (9.17 oz)
133 g (4.69 oz), 260 g (9.17 oz)
133 g (4.69 oz), 260 g (9.17 oz)
133 g (4.69 oz), 260 g (9.17 oz)
Fuses
50 mA for each channel
5 A for each supply
50 mA per channel
None
Screw torque
0.5 N•m (0.37 lb•ft)
Screwdriver width
Flathead 0.4 x 2.0 m (0.0156 x 0.0781 in.)
Dimensions
(H x W x D), approx
1715-TASIB16D, 1715-TASOB8DE, 1715-TASIF16, 1715-TASOF8: 132 x 42 mm (5.25 x 1.65 in.)
1715-TADIB16D, 1715-TADOB8DE, 1715-TADIF16, 1715-TADOF8: 132 x 84 mm (5.25 x 3.375 in.)
Conformal Coating Standards
The 1715 modules are conformally coated and meet the following standards:
• ANSI/ISA-S71.04-2013; Class G1, G2, and G3 environments
• CEI IEC 60654-4:1987; Class 1, 2, and 3 Environments
• UL746E
• MIL-1-46058C to ASTM-G21 (Tropicalization and fungicide)
2
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
1715-AENTR EtherNet/IP Adapter and 1715-A2A Module Base
1715-AENTR Power Wiring
0V
+24V DC
Pwr1
0V +24V DC
Pwr2
Table 3 - Technical Specifications - 1715-AENTR EtherNet/IP Adapter and 1715-A2A Module Base
Attribute
1715-AENTR and 1715-A2A
Modules supported, max
24 per adapter pair
Operating voltage range, supply power and/or current ratings
1715-AENTR backplane: 380 mA @18…32V DC
1715-A2A input power: 10.4 A total max/400 mA max per slot @ 18…32V DC
For fault-tolerant applications, the I/O module power is less than 3.2 A
Power dissipation
8 W max, per adapter
Isolation voltage
50V (continuous), basic insulation type, Ethernet ports to backplane and Ethernet ports to DC
power ports
No isolation between individual Ethernet ports
No isolation between DC power ports
Type tested @ 500V AC for 60 s
Base unit
1715-A2A (2-slot adapter base unit)
Weight, approx
1715-AENTR module: 420 g (14.82 oz)
1715-A2A base unit: 283 g (9.98 oz)
Fuse, type
4 A, 125V, Type T
Wiring category
2 - on power ports
2 - on communication ports(1)
Wire size
1715-A2A DC Power connections: single 2.5 mm2 (12 AWG) solid or stranded copper wire rated at
85 °C (185 °F) or greater,
7 mm (9/32 in.) strip length
1715-A2A Ground connection: 4 mm2 (10 AWG) min
Wire type
1715-A2A Ethernet connections:
Shielded RJ45 connector according to IEC60603-7, 2-pair or 4-pair shielded
Category 5e min cable according to TIA 568-B
1 or shielded Category 5 cable according to ISO/IEC 24702
North American temperature code
T4
IEC temperature code
T4
Enclosure type rating
None (open-style)
(1) Use this conductor category information for planning conductor routing as described in the system level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1.
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
3
1715 Redundant I/O System Specifications
Table 4 - Environmental Specifications - 1715-AENTR EtherNet/IP Adapter and 1715-A2A Module Base
Attribute
1715-AENTR and 1715-A2A
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-25…60 °C (-13…140 °F)
Temperature, surrounding air max
60 °C (140 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…85 °C (-40…185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)
10…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
Din rail mount: 25 g
Panel mount: 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
Installed: 30 g
Uninstalled: 50 g (with slot fillers)
Emissions
CISPR 11 (IEC 61000-6-4)
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
20V/m with 1 kHz sine-wave 80% AM from 80…1000 MHz
10V/m with 1 kHz sine-wave 80% AM from 1000…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4
±3 kV at 5 kHz on power ports
±2 kV at 5 kHz on shielded Ethernet ports
Surge transient immunity
IEC 61000-4-5
±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports
±2 kV line-earth (CM) on shielded Ethernet ports
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz
Table 5 - Certifications - 1715-AENTR EtherNet/IP Adapter and 1715-A2A Module Base
4
Certification(1)
1715-AENTR and 1715-A2A
cULus
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E341697.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada.
See UL File E251761.
CE
European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick
Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection ‘n’
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
• DEMKO 11 ATEX 7928686X
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
Table 5 - Certifications - 1715-AENTR EtherNet/IP Adapter and 1715-A2A Module Base
Certification(1)
1715-AENTR and 1715-A2A
IECEx
IECEx Hazardous Location approval, compliant with:
• IEC 60079-0: Ed 6 Explosive Atmospheres - General Requirements
• IEC 60079-15: Ed 4 Explosive Atmospheres - Protection 'n'
• IECEx UL 15.0032X
KC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
EtherNet/IP
ODVA conformance tested to EtherNet/IP specifications
Functional Safety
TÜV Certified for Functional Safety(2):
Capable of SIL 2 according to EN 62061, IEC 61508, and EN 61326-3-1
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
(2) When used with specified firmware revisions.
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
5
1715 Redundant I/O System Specifications
1715-IB16D Digital Input Module, 1715-A3IO Module Base, and Termination
Assemblies
Line Monitored Input
+24V DC
DIGITAL INPUT
1715-IB16D
Healthy
Ready
Run
Termination
Assembly
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
50 mA
Shield
(if used)
5.11K Ω
Terminal
Blocks
OV
Channel 08
Channel 09
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Standard Input
+24V DC
Termination
Assembly
32065-M
50 mA
Shield
(if used)
5.11K Ω
Terminal
Blocks
32092-M
OV
Table 6 - Technical Specifications - 1715-IB16D Digital Input Module, 1715-A3IO Module Base, and 1715-TASIB16D, 1715-TADIB16D Termination
Assemblies
6
Attribute
1715-IB16D, 1715-A3IO, 1715-TASIB16D, 1715-TADIB16D
Operating voltage range, supply power and/or current ratings
1715-IB16D backplane: 260 mA @ 18…32V DC
1715-TASIB16D, 1715-TAD8B16D: 6.5 mA per channel @ 0…32V DC
Slew rate, max
3600 V/s(1)
Translation rate, max
1/(Application scan time + 10 ms) Hz(1)
Power dissipation
System 4.0 W max.
Field loop: 0.2 W per field loop max.
Isolation voltage
50V (continuous), basic insulation type, I/O ports to backplane
No isolation between individual I/O ports if the 1715-TASIB16D termination assembly is fitted
50V isolation between individual ports if 1715-TADIB16D termination assembly is fitted
Type tested at 500V AC for 60 s
Weight, approx
1715-IB16D: 360 g (12.70 oz)
I/O base unit: 133 g (5 oz)
Termination assembly: 133 g (5 oz), 260 g (10 oz)
Dimensions (H x W x D), approx
166 x 42 x 118 mm (6.5 x 1.625 x 4.625 in.)
Wire size
1715-TASIB16D, 1715-TADIB16D connections:
0.33…1.5 mm2 (22…16 AWG) solid or stranded copper wire rated at 85 °C (185 °F), or greater
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
Table 6 - Technical Specifications - 1715-IB16D Digital Input Module, 1715-A3IO Module Base, and 1715-TASIB16D, 1715-TADIB16D Termination
Assemblies
Attribute
1715-IB16D, 1715-A3IO, 1715-TASIB16D, 1715-TADIB16D
Wiring category
2 - on signal ports(2)
Fuse, type
50 mA, 125V, Type T
North American temperature code
T4
IEC temperature code
T4
Enclosure type
None (open-style)
(1) The input slew can exceed the specified levels if the duration of the transgression is less than the process safety time of the configured module.
Transgression of the slew rate limits identified previously can lead to channel failure that results from diagnostics that are otherwise designed to ensure channels are operating within their defined safety
accuracy.
(2) Use this conductor category information for planning conductor routing as described in the system-level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1.
Table 7 - Environmental Specifications - 1715-IB16D Digital Input, 1715-A3IO Module Base, and 1715-TASIB16D, 1715-TADIB16D Termination
Assemblies
Attribute
1715-IB16D, 1715-A3IO, 1715-TASIB16D, 1715-TADIB16D
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-25…70 °C (-13…158 °F)
Temperature, surrounding air, max
70 °C (158 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…85 °C (-40…185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)
10…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
DIN rail mount: 25 g
Panel mount: 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
Installed: 30 g
Uninstalled: 50 g (with slot fillers)
Emissions
CISPR 11 (IEC 61000-6-4)
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
20V/m with 1 kHz sine-wave 80% AM from 80…1000 MHz
10V/m with 1 kHz sine-wave 80% AM from 1000…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4
±2 kV @ 5 kHz on signal ports
Surge transient immunity
IEC 61000-4-5
±1 kV line-line (DM) and ±2 kV line-earth (CM) on signal ports
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
7
1715 Redundant I/O System Specifications
Table 8 - Certifications - 1715-IB16D Digital Input, 1715-A3IO Module Base, and 1715-TASIB16D, 1715-TADIB16D Termination Assemblies
Certification(1)
1715-IB16D, 1715-A3IO, 1715-TASIB16D, 1715-TADIB16D
cULus
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E341697.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See
UL File E251761.
CE
European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick
Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection ‘n’
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
• DEMKO 11 ATEX 7928686X
IECEx
IECEx Hazardous Location approval, compliant with:
• IEC 60079-0: Ed 6 Explosive Atmospheres - General Requirements
• IEC 60079-15: Ed 4 Explosive Atmospheres - Protection 'n'
• IECEx UL 15.0032X
KC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Functional Safety
TÜV Certified for Functional Safety(2):
Capable of SIL 2 according to EN 62061, IEC 61508, and EN 61326-3-1
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
(2) When used with specified firmware revisions.
8
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
1715-OB8DE Digital Output Module, 1715-A3IO Module Base, and Termination
Assemblies
Standard Output
DIGITAL OUTPUT
1715-OB8DE
Healthy
Ready
Run
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
33002-M
32090-M
Table 9 - Technical Specifications - 1715-OB8DE Digital Output Module, 1715-A3IO Module Base, and 1715-TASOB8DE, 1715-TADOB8DE Termination
Assemblies
Attribute
1715-OB8DE, 1715-A3IO, 1715-TASOB8DE, 1715-TADOB8DE
Operating voltage range, supply power and/or current ratings
1715-OB8DE backplane: 165 mA @ 18…32V DC
1715-TASOB8DE, 1715-TADOB8DE I/O: 0.5 A per channel @ 18…32V DC
Field voltage slew rate, max
150 V/s(1),(2)
De-energized output voltage slew rate, max
12 V/ms(3)
Energized output current slew rate, max
0.9 A/ms(3)
Power dissipation
System: 3.0 W max
Field Loop: 0.17 W per field loop
Isolation voltage
50V (continuous), basic insulation type, I/O ports to backplane
No isolation between individual I/O ports
Type tested at 500V AC for 60 s
Weight, approx
1715-OB8DE module: 290 g (10.23 oz)
I/O base unit: 133 g (5 oz)
Termination assembly: 133 g (5 oz), 260 g (10 oz)
Dimensions (H x W x D), approx
166 x 42 x 118 mm (6.5 x 1.625 x 4.625 in.)
Wire size
1715-TASOB8DE, 1715-TADOB8DE connections:
Single 0.75…1.5 mm2 (18…16 AWG) solid or stranded copper wire rated at 85 °C (185 °F), or
greater
Wiring category
2 - on signal ports(4)
Fuse, type
1715-TASOB8DE, 1715-TADOB8DE I/O: 10 A, 125V, Type F
1715-TASOB8DE, 1715-TADOB8DE I/O Power Source: 5 A max, 32V DC, min
Pilot duty rating
16VA, 1.5 inrush
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
9
1715 Redundant I/O System Specifications
Table 9 - Technical Specifications - 1715-OB8DE Digital Output Module, 1715-A3IO Module Base, and 1715-TASOB8DE, 1715-TADOB8DE Termination
Assemblies
Attribute
1715-OB8DE, 1715-A3IO, 1715-TASOB8DE, 1715-TADOB8DE
North American temperature code
T4
IEC temperature code
T4
Enclosure type
None (open-style)
(1) Limit not applicable if all outputs are energized.
(2) Limit not applicable if perturbations are less than 2.0 Vpp or last less than 3 minutes in any 60 minute period.
(3) Limit not applicable to transgressions that last less than the process safety time configured for the module.
Transgression of the slew rate limits identified previously can lead to channel failure that results from diagnostics that are otherwise designed to ensure channels are operating within their defined safety
accuracy.
(4) Use this conductor category information for planning conductor routing as described in the system-level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1.
Table 10 - Environmental Specifications - 1715-OB8DE Digital Output Module, 1715-A3IO Module Base, and 1715-TASOB8DE, 1715-TASOB8DE
Termination Assemblies
Attribute
1715-OB8DE, 1715-A3IO, 1715-TASOB8DE, 1715-TADOB8DE
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-25…70 °C (-13…158 °F)
Temperature, surrounding air, max
70 °C (158 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…85 °C (-40…185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)
10…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
DIN rail mount: 25 g
Panel mount: 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
Installed: 30 g
Uninstalled: 50 g (with slot fillers)
Emissions
CISPR 11 (IEC 61000-6-4)
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
20V/m with 1 kHz sine-wave 80% AM from 80…1000 MHz
10V/m with 1 kHz sine-wave 80% AM from 1000…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4
±2 kV @ 5 kHz on signal ports
Surge transient immunity
IEC 61000-4-5
±1 kV line-line (DM) and ±2 kV line-earth (CM) on signal ports
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz
10
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
Table 11 - Certifications - 1715-OB8DE Digital Output Module, 1715-A3IO Module Base, and 1715-TASOB8DE, 1715-TASOB8DE Termination
Assemblies
Certification(1)
1715-OB8DE, 1715-A3IO, 1715-TASOB8DE, 1715-TADOB8DE
cULus
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E341697.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E251761.
CE
European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick
Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection ‘n’
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
• DEMKO 11 ATEX 7928686X
IECEx
IECEx Hazardous Location approval, compliant with:
• IEC 60079-0: Ed 6 Explosive Atmospheres - General Requirements
• IEC 60079-15: Ed 4 Explosive Atmospheres - Protection 'n'
• IECEx UL 15.0032X
KC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Functional Safety
TÜV Certified for Functional Safety(2):
Capable of SIL 2 according to EN 62061, IEC 61508, and EN 61326-3-1
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
(2) When used with specified firmware revisions.
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
11
1715 Redundant I/O System Specifications
1715-IF16 Analog Input Module, 1715-A3IO Module Base, and Termination
Assemblies
3-wire Analog Input
2-wire Analog Input
ANALOG INPUT
1715-IF16
+24V DC
+24V DC
Healthy
Ready
Run
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
Termination
Assembly
4-20 mA
Termination
Assembly
4-20 mA
50 mA
Shield
(if used)
Terminal
Blocks
120 Ω
Terminal
Blocks
OV
OV
4-wire Analog Input
Channel 08
Channel 09
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
+V 5
Termination
Assembly
-V 5
4-20 mA
50 mA
Shield
(if used)
120 Ω
Terminal
Blocks
32091-M
OV
Table 12 - Performance Criteria for 1715-IF16 Analog Input Module
Attribute
Value
Data Input value least significant bit
0.98 A
Channel Measurement Error at 25 ºC (77 ºF) ± 2 ºC (± 3.6 ºF)
After 1 year at 40 ºC (104 ºF)
After 2 years at 40 ºC (104 ºF)
After 5 years at 40 ºC (104 ºF)
0.21% + 10 A
0.22% + 10 A
0.23% + 10 A
Temperature Drift
(0.01% + 0.3 A) per ºC
12
50 mA
Shield
(if used)
120Ω
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
Table 13 - Technical Specifications - 1715-IF16 Analog Input Module, 1715-A3IO Module Base, and 1715-TASIF16, 1715-TADIF16 Termination
Assemblies
Attribute
1715-IF16, 1715-A3IO, 1715-TASIF16, 1715-TADIF16
Operating voltage range, supply power and/or current ratings
1715-IF16 backplane: 260 mA @ 18…32V DC
1715-TASIF16, 1715-TADIF16 I/O: 0…24 mA per channel @ 18…32V DC
Slew rate, max
700 mA/s(1)
Power dissipation
System 4.0 W max.
Field loop: 0.075 W per field loop max.
Isolation voltage
50V (continuous), basic insulation type, I/O ports to backplane
No isolation between individual I/O ports if the 1715-TASIF16 termination assembly is fitted
50V isolation between individual ports if 1715-TADIIF16 termination assembly is fitted
Type tested at 500V AC for 60 s
Input resolution
0.0039 mA/cnt (12 bits over 4…20 mA range)
Weight, approx
1715-IF16 module: 360 g (12.70 oz)
I/O base unit: 133 g (5 oz)
Termination assembly: 133 g (5 oz), 260 g (10 oz)
Dimensions (H x W x D), approx
166 x 42 x 118 mm (6.5 x 1.625 x 4.625 in.)
Wire size
1715-TASIF16, 1715-TADIF16 I/O connections:
Single 0.33…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at
85 °C (185 °F), or greater
Wiring category
2 - on shielded signal ports(2)
Fuse, type
1715-TASIF16, 1715-TADIF16 I/O: 50 mA, 125V, Type T
Wire type
Shielded
North American temperature code
T4
IEC temperature code
T4
Enclosure type
None (open-style)
(1) The input slew can exceed the specified level if the duration of the transgression is less than the process safety time of the configured module.
Transgression of the slew rate limits identified previously can lead to channel failure that results from diagnostics that are otherwise designed to ensure channels are operating within their defined safety
accuracy.
(2) Use this conductor category information for planning conductor routing as described in the system-level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1.
Table 14 - Environmental Specifications - 1715-IF16 Analog Input Module, 1715-A3IO Module Base, and 1715-TASIF16, 1715-TADIF16 Termination
Assemblies
Attribute
1715-IF16, 1715-A3IO, 1715-TASIF16, 1715-TADIF16
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-25…70 °C (-13…158 °F)
Temperature, surrounding air, max
70 °C (158 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…85 °C (-40…185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)
10…95% noncondensing
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
13
1715 Redundant I/O System Specifications
Table 14 - Environmental Specifications - 1715-IF16 Analog Input Module, 1715-A3IO Module Base, and 1715-TASIF16, 1715-TADIF16 Termination
Assemblies
Attribute
1715-IF16, 1715-A3IO, 1715-TASIF16, 1715-TADIF16
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
DIN rail mount: 25 g
Panel mount: 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
Installed: 30 g
Uninstalled: 50 g (with slot fillers)
Emissions
CISPR 11 (IEC 61000-6-4)
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
20V/m with 1 kHz sine-wave 80% AM from 80…1000 MHz
10V/m with 1 kHz sine-wave 80% AM from 1000…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4
±2 kV @ 5 kHz on shielded signal ports
Surge transient immunity
IEC 61000-4-5
±2 kV line-earth (CM) on shielded signal ports
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz
Table 15 - Certifications - 1715-IF16 Analog Input Module, 1715-A3IO Module Base, and 1715-TASIF16, 1715-TADIF16 Termination Assemblies
Certification(1)
1715-IF16, 1715-A3IO, 1715-TASIF16, 1715-TADIF16
cULus
UL
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E341697.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E251761.
CE
European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick
Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection ‘n’
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
• DEMKO 11 ATEX 7928686X
IECEx
IECEx Hazardous Location approval, compliant with:
• IEC 60079-0: Ed 6 Explosive Atmospheres - General Requirements
• IEC 60079-15: Ed 4 Explosive Atmospheres - Protection 'n'
• IECEx UL 15.0032X
KC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Functional Safety
TÜV Certified for Functional Safety(2):
Capable of SIL 2 according to EN 62061, IEC 61508, and EN 61326-3-1
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
(2) When used with specified firmware revisions.
14
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
1715-OF8I Analog Output Module, 1715-A3IO Module Base, and Termination
Assemblies
Analog Output Field Loop Circuit
ANALOG OUTPUT
1715-OF8I
System
+24V DC
Healthy
Ready
Run
CH+
Channel 00
Channel 01
Channel 02
Channel 03
Channel 04
Channel 05
Channel 06
Channel 07
CHAnalog Output
Module
Termination
Assembly
Load
OV
Analog Output Field Power Circuit
System
+24V DC
CH+
Load
CHAnalog Output
Module
Termination
Assembly
32089-M
OV
Table 16 - Performance Criteria for 1715-OF8I Analog Output Module
Attribute
Value
Data Input value least significant bit (control)
0.98 A
Data Output value least significant bit (monitor)
3.9 A
Channel Measurement Error at 25 ºC (77 ºF) ± 2 ºC (± 3.6 ºF)
After 1 year at 40 ºC (104 ºF)
After 2 years at 40 ºC (104 ºF)
After 5 years at 40 ºC (104 ºF)
0.30% + 10 A
0.35% + 10 A
0.44% + 10 A
Temperature drift
(0.01% + 0.1 A) per ºC
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
15
1715 Redundant I/O System Specifications
Table 17 - Technical Specifications - 1715-OF8I Analog Output Module, 1715-A3IO Module Base, and 1715-TASOF8I, 1715-TADOF8I Termination
Assemblies
Attribute
1756-OF8I, 1715-A3IO, 1715-TASOF8, 1715-TADOF8
Operating voltage range, supply power and/or current ratings
1715-OF8I backplane: 260 mA @ 18…32V DC
1715-TASOF8, 1715-TADOF8 I/O: 0…24 mA per channel @ 18…32V DC
Compliance voltage slew rate, max
No limit identified within compliance voltage range
Power dissipation
System: 3.6 W max
Field Loop: 0.64 W per field loop
Isolation voltage
50V (continuous), basic insulation type, I/O ports to backplane
50V isolation between individual I/O ports
Type tested at 500V AC for 60 s
Weight, approx
1715-OF8I module: 340 g (11.99 oz)
I/O base unit: 133 g (5 oz)
Termination assembly: 133 g (5 oz), 260 g (10 oz)
Dimensions (H x W x D), approx
166 x 42 x 118 mm (6.5 x 1.625 x 4.625 in.)
Wire size
1715-TASOF8I, 1715-TADOF8I I/O connections:
Single 0.33…1.5 mm2 (22…16 AWG) solid or stranded shielded copper wire rated at 85 °C (185
°F), or greater
Wiring category
2 - on shielded signal ports(1)
Wire type
Shielded
North American temperature code
T4
IEC temperature code
T4
Enclosure type
None (open-style)
(1) Use this conductor category information for planning conductor routing as described in the system-level installation manual. See the Industrial Automation Wiring and Grounding Guidelines, publication
1770-4.1.
Table 18 - Environmental Specifications -1715-OF8I Analog Output Module, 1715-A3IO Module Base, and 1715-TASOF8, 1715-TADOF8 Termination
Assemblies
Attribute
1756-OF8I, 1715-A3IO, 1715-TASOF8, 1715-TADOF8
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
-25…70 °C (-13…158 °F)
Temperature, surrounding air, max
70 °C (158 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
-40…85 °C (-40…185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Nonoperating Damp Heat)
10…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating)
2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
DIN rail mount: 25 g
Panel mount: 30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock)
Installed: 30 g
Uninstalled: 50 g (with slot fillers)
16
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
Table 18 - Environmental Specifications -1715-OF8I Analog Output Module, 1715-A3IO Module Base, and 1715-TASOF8, 1715-TADOF8 Termination
Assemblies
Attribute
1756-OF8I, 1715-A3IO, 1715-TASOF8, 1715-TADOF8
Emissions
CISPR 11 (IEC 61000-6-4)
Class A
ESD immunity
IEC 61000-4-2
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3
20V/m with 1 kHz sine-wave 80% AM from 80…1000 MHz
10V/m with 1 kHz sine-wave 80% AM from 1000…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
3V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4
±2 kV @ 5 kHz on shielded signal ports
Surge transient immunity
IEC 61000-4-5
±2 kV line-earth (CM) on shielded signal ports
Conducted RF immunity
IEC 61000-4-6
10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz
Table 19 - Certifications - 1715-OF8I Analog Output Module, 1715-A3IO Module Base, and 1715-TASOF8, 1715-TADOF8 Termination Assemblies
Certification(1)
1756-OF8I, 1715-A3IO, 1715-TASOF8, 1715-TADOF8
cULus
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E341697.
UL Listed for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for U.S. and Canada. See UL File E251761.
CE
European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
C-Tick
Australian Radiocommunications Act, compliant with:
AS/NZS CISPR 11; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection ‘n’
• EN 60079-0; General Requirements II 3 G Ex nA IIC T4 Gc X
• DEMKO 11 ATEX 7928686X
IECEx
IECEx Hazardous Location approval, compliant with:
• IEC 60079-0: Ed 6 Explosive Atmospheres - General Requirements
• IEC 60079-15: Ed 4 Explosive Atmospheres - Protection 'n'
• IECEx UL 15.0032X
KC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
Functional Safety
TÜV Certified for Functional Safety(2):
Capable of SIL 2 according to EN 62061, IEC 61508, and EN 61326-3-1
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
(2) When used with specified firmware revisions.
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
17
1715 Redundant I/O System Specifications
1715 Redundant I/O System Accessories
Table 20 - 1715 Module Slot Filler
Cat. No.
Description
Weight, approx, g (oz)
1715-N2S
Short blank slot filler
40 (1.41)
1715-N2T
Tall blank slot filler
50 (1.76)
1715-C2 Expansion Cable
Adapter and module I/O base units can be connected via expansion cables to allow for system space requirements. The
entire length of the system, including the backplane and expansion cables, cannot exceed 10 m.
Table 21 - Technical Specifications - 1715 Expansion Cable
Attribute
1715-C2
Supply voltage
50V
Dimensions, approx
2m
Weight, approx
Cable assembly:
Cable plug assembly:
Cable socket assembly:
570 g (20 oz)
50 g (2 oz)
50 g (2 oz)
Screw torque
0.5 N•m (0.37 lb•ft)
Screwdriver width
0.4 x 2.0 mm (0.0156 x 0.0781 in.)
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource
Description
1715 Redundant I/O System User Manual, publication 1715-UM001
Provides information that is required to install, configure, operate, and maintain the
adapter for a redundant I/O system and I/O modules.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1
Provides general guidelines for installing a Rockwell Automation® industrial system.
Product Certifications website, http://www.ab.com
Provides declarations of conformity, certificates, and other certification details.
You can view or download publications at http://www.rockwellautomation.com/literature/. To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
18
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
1715 Redundant I/O System Specifications
Notes:
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
19
Important User Information
Read this document and the documents listed in the additional resources section about installation, configuration, and
operation of this equipment before you install, configure, operate, or maintain this product. Users are required to
familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws,
and standards.
Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required
to be carried out by suitably trained personnel in accordance with applicable code of practice.
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be
impaired.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the
use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and
requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or
liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or
software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation,
Inc., is prohibited.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this
document, complete this form, publication RA-DU002, available at http://www.rockwellautomation.com/literature/.
Rockwell Automation maintains current product environmental information on its website at
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, Rockwell Software, Rockwell Automation, and LISTEN. THINK. SOLVE are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
United Kingdom: Rockwell Automation Ltd, Hall Road, Maldon, Essex CM94LA, UK, Tel: (44) 1621 854444, Fax: (44) 1621 851531
Publication 1715-TD001E-EN-P - January 2017
Supersedes Publication 1715-TD001D-EN-P - October 2016
Copyright © 2017 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
1715 Redundant I/O System Specifications
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
21
1715 Redundant I/O System Specifications
22
Rockwell Automation Publication 1715-TD001E-EN-P - January 2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising