Blue Coat ProxySG810 Series Safety and Conformity Sheet

Blue Coat ProxySG810 Series Safety and Conformity Sheet
Any modification to this product, unless expressly approved by Blue Coat Systems, Inc., could void the
user’s authority to operate the equipment.
Do not service the proxy yourself. If you have any questions, please
contact Blue Coat.
Blue Coat Corporate
420 North Mary Avenue
Sunnyvale, CA 94085-4121
408.220.2200
General System Cautions
To ensure normal operation, follow these guidelines:
Top cover removal—Before removing the top cover, turn off the power.
Ventilation guidelines—Be Careful! Do not block any openings in the system to avoid overheating the
system.
Water caution—Be Careful! Do not get any water on the system.
System use and installation—The system is intended for use in a server room only. It is not intended be
installed in individual employee work areas.
Rack Mounting Notes
Read the following notes before rack-mounting the SG810:
A
Elevated Operating Ambient—If installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than room ambient. Therefore,
consideration should be given to installing the equipment in an environment compatible with the
maximum ambient temperature (Tmax) specified by the manufacturer.
B
Reduced Air Flow—Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
C
Mechanical Loading—Mounting of the equipment in the rack should be such that a hazardous
condition is not achieved due to uneven mechanical loading.
D
Circuit Overloading—Consideration should be given to the connection of the equipment to the supply
circuit and the effect that overloading of the circuits might have on overcurrent protection and supply
wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing
this concern.
E
Reliable Earthing —Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch circuit (for
example, use of power strips).
1
P/N 231-02820 Rev F.0
Power Cord Cautions
Caution—This product is designed to work with power systems having a grounded neutral. To reduce the
risk of electric shock, do not plug this product into any other type of power system. Contact a qualified
electrician if you are not sure what type of power is supplied to your building.
Caution—Not all power cords have the same current ratings. Do not use the power cord provided with
your equipment for any other products or use.
Caution—there is no power switch equipped on this device. The power cord serves as the primary
disconnect device for the system. Be sure to plug the power cord into a grounded power outlet that is
nearby the system and is readily accessible. Do not connect the power cord when the power supply has
been removed from the system chassis.
Class A Digital Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, might cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the users are required
to correct the interference at their own expense.
Advertencia Digital Clase A
Este equipo ha sido probado y se ha visto que se mantiene dentro de los límites de un dispositivo digital
Clase A según la parte 15 de las normas de la FCC. Estos límites están designados para proveer una
protección razonable contra interferencias dañinas cuando el equipo es usado en un ambiente comercial.
Este equipo genera, usa y puede irradiar energía de radiofrecuencia; si no es instalado y usado de acuerdo
al manual de instrucciones, puede causar interferencias perjudiciales para las comunicaciones de radio. El
uso de este equipo en un área residencial puede causar interferencia perjudicial; en este caso los usuarios
deberán corregir la interferencia cubriendo los gastos por ellos mismos.
EC Community EMC Warning
This is a Class A product. In a domestic environment, this product might cause radio interference in which
case the user might be required to take adequate measures.
Advertencia EMC de la Comunidad EC
Este es un producto Clase A En un ambiente doméstico, este producto puede causar interferencia de radio,
en cuyo caso el usuario podría verse obligado a tomar medidas adecuadas.
Canadian EC EMC Warning
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class A est
conforme a la norme NMB-003 du Canada.
Australia/New Zealand EC EMC Warning
This is a Class A product. In a domestic environment, this product might cause radio interference, in
which case the user might be required to take adequate measures.
P/N 231-02820 Rev F.0
2
Taiwan BSMI Notification
Japan VCCI EMC Notification
Battery Warning Notification
CAUTION: Danger of explosion if battery is incorrectly placed. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
Connection to ports not defined for normal operation, according to this manual, might result in excessive
radiated emissions. The user is then responsible for all corrective action in the event of any problem.
PRECAUCION: Peligro de explosión si la batería es colocada incorrectamente. Substituya sólo con el con
el modelo original o la recomendacion del fabricante. Elimine las baterías usadas segun las instrucciones
del fabricante.
La conexión a puertos no definidos para operación normal, de acuerdo a este manual, puede producir
emisiones excesivas de radiación. El usuario es responsable de corregir esto en caso de cualquier
problema.
ATTENTION: Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer
uniquement avec une batterie de meme type ou d’un type equivalent recommande par le constructeur.
Metter au rebut less batteries usagees conformement aux instructions du fabricant.
VORSICHT! Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben
oder einen vom Hersteller empfohlenen glelchwertigen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
3
P/N 231-02820 Rev F.0
Chinese Battery Warning Notification
China CCC Notification
Lasers
Location of the laser apertures if any (Par. 6.1 3). Example: connectors for fiber optic component.
P/N 231-02820 Rev F.0
4
5
P/N 231-02820 Rev F.0
P/N 231-02820 Rev F.0
6
7
P/N 231-02820 Rev F.0
Declaration of Conformity
Declaration of Conformity
We, Blue Coat Systems
420 North Mary Avenue
Sunnyvale, CA 94085
Declare under our sole responsibility that the products
Blue Coat Systems model 810
to which this declaration relates is in conformity with the following
standards:
EN 60950: 2001+A11
EN 55022: 1994+A1:1995+A2:1997
EN 50024: 1998+A1:2000+A2:2003
Following the provisions of the 73/23/EEC and 89/336/EEC Directives,
including the Amending Directive 93/68/EEC.
Blue Coat Systems model 810 is also in conformity with the following
standard:
Directive 2002/95/EC, Restriction of Hazardous Substances (RoHS).
Sunnyvale, CA 94085
Date: July 1, 2006
420 North Mary Avenue
Sunnyvale, CA 94085-4121
USA
866.30.BCOAT Toll Free
408.220.2200 Direct
408.220.2250 Fax
www.bluecoat.com
Tim Redjaian
Director of Engineering
8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising