Fused Single-Mode WDM (1310/1550nm)

Fused Single-Mode WDM (1310/1550nm)
Fused Single-Mode WDM (1310/1550nm)
SWDM53 Series
Product Description
Oplink’s 1310/1550nm fused single-mode wavelength division multiplexers
are manufactured using the proven fused biconical taper technology and
Oplink’s stringent quality procedures. With low insertion loss and flat passband, this device is ideal for combining or separating optical signals in the
1310 and 1550nm bands.
Oplink can provide customized designs to meet specialized feature applications. Also, Oplink offers modular assemblies that integrate other components to form a full function module or subsystem.
Port 4 (terminated for
1x2 configuration)
Port 2 Signal
L
Port 1 In
Ø
Port 3 Pump
Features
Performance Specificationns
SWDM53 Series
Grade (P=Premium, A=Grade A)
Standard
P
Operating Wavelength
High Isolation
A
P
Unit
A
 Ultra Low Insertion Loss
 Ultra High Isolation
 Low Polarization Sensitivity
1295~1325nm / 1528~1565nm
 High Directivity
Insertion Loss 1, 2
< 0.3
< 0.5
< 0.7
< 1.0
dB
Wavelength Dependent Loss
< 0.15
< 0.20
< 0.15
< 0.20
dB
 High Stable & Reliable
Temperature Dependent Loss
< 0.15
< 0.20
< 0.15
< 0.20
dB
Bidirectional
> 16
> 34
> 30
dB
Isolation
Polarization Dependent Loss
Directivity
Maximum Power Handling
> 17
< 0.1
< 0.2
dB
> 55
dB
500
mW
Operating Temperature
- 10 to + 70
°C
Applications
Storage Temperature
- 40 to + 85
°C
Telecommunications
Fiber Type
Package Dimensions *
Corning SMF-28 or equivalent
P1: 250µm SMF-28 fiber
P2: 900µm loose tube
P3: 3mm cable
P4: 900μm Loose Tube
or 3mm Cable(High
Isolation only)
(ø) 3.0 x (L) 54.0
(ø) 3.0 x (L) 60.0
(L) 96 x (W) 12 x (H) 6.4
(L)100 x (W) 80 x (H) 7.0
CATV
 Subscriber Loop
mm
 Local Area Networks
 Laboratory R&D
Note:
1. Values are referenced without connector loss.
2. Insertion loss over operating wavelength range at ~23°C (excluding PDL and TDL).
* The mechanical tolerance is +/-0.2 mm on all package dimensions unless otherwise specified.
S0166- R02. (web) 20150416
Fused Single-Mode WDM (1310/1550nm)
SWDM53 Series
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
SWDM
5
3
0
Grade
Wavelength
Premium Grade= P
A Grade= A
1550/1310nm= 53
Type
Standard= S
High Isolation= H*(P4 only)
Configuration
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com
1x2 = 1
2x2 = 2 **
0
Fiber Length***
0.5 Meter = H
1.0 Meter = 1
1.5 Meters = 5
2.0 Meters = 2
Package & Fiber Type
P1+ 250μm bare fiber = 11
P2+ 900μm loose tube = 22
P3+ 3mm cable = 33
P4+ 900μm loose tube = 42
P4+ 3mm cable = 43
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC/PC = 9
MU = A
LC/APC = B
Notes :
* Must be P4 package
** Not available for high isolation model
*** 1 meter is standard. The lead time for special fiber length will be longer. The tolerance of fiber length is +/-0.1m. (For connector option only, for without connector, just keep the length as minimum)
S0166 - R02. (web) 20150416
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Interconnect  Transmission  HFC/RoF Subsystem
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising