Table of Contents ▼ Main Menu ▲ ０５／０８／１６ ２０：５２：４７ ３１ＳＪＡ６１０ ０２１４ Adjusting the Sound FADER/BALANCE − These modes adjust the strength of the sound coming from each speaker. Fader adjusts the front-to-back strength, while balance adjusts the side-to-side strength. To adjust fader and balance, select FADER or BALANCE, then press ENTER on the interface selector. The current setting is shown on the screen. Turn the interface knob to the desired level, and enter your selection by pressing ENTER on the interface selector. To equalize the fader or balance, turn the interface knob until the marks on the sound grid come to the center of the adjustment bar. CENTER/SUBWOOFER − To adjust the strength of the sound from the center or subwoofer speaker, select it and press ENTER on the interface selector. Turn the interface knob to the desired level, and enter your selection by pressing ENTER on the interface selector. CONTINUED 211 Features BASS/TREBLE − To adjust bass and treble, select BASS or TREBLE, and press ENTER on the interface selector. The current setting is shown on the display. Turn the interface knob to the desired level, and enter your selection by pressing ENTER on the interface selector. Table of Contents ▼ Main Menu ▲ ０５／０８／１６ ２０：５２：５２ ３１ＳＪＡ６１０ ０２１５ Adjusting the Sound AudioPilot − Bose AudioPilot digital processing monitors sound within the cabin, and helps compensate for unwanted ambient noise with no perceived change in audio volume. To set this feature on or off, select AudioPilot, and press ENTER on the interface selector. Turn the interface knob to ON or OFF, and press ENTER on the interface selector. The ON or OFF indicator is shown on the screen. Centerpoint − Bose Centerpoint signal processing processes stereo and matrix surround recordings to five independent channels, delivering a multi-channel surround sound experience, even from conventional stereo discs. To set this feature on or off, select Centerpoint, and press ENTER on the interface selector. Turn the interface knob to ON or OFF, and press ENTER on the interface selector. The ON or OFF indicator is shown on the display. NOTE: Centerpoint is only available when listening to a CD (CD-DA). 212 AudioPilot and Centerpoint are registered trade marks of the Bose corporation. Table of Contents ▲ Main Menu ▼ ０５／０８／１６ ２０：５２：５９ ３１ＳＪＡ６１０ ０２１６ Playing the XM Satellite Radio U.S. models (except Alaskan and Hawaiian) SATELLITE RADIO BUTTON UPPER DISPLAY TUNE BUTTONS CATEGORY BUTTONS SCAN BUTTON DISPLAY/ MODE BUTTON AUDIO DISPLAY BUTTON INTERFACE DIAL PRESET BUTTON 213 Features POWER/ VOLUME KNOB Table of Contents ▼ Main Menu ▲ ０５／０８／１６ ２０：５３：０６ ３１ＳＪＡ６１０ ０２１７ Playing the XM Satellite Radio Your vehicle is capable of receiving XM Satellite Radio anywhere in the United States, except Hawaii and Alaska. XM is a registered trade mark of XM Satellite Radio, Inc. In the category mode, such as Jazz, Rock, Classical, etc., you can navigate through all of the channels within that category. In the channel mode, you can select all of the available channels. XM Satellite Radio receives signals from two satellites to produce clear, high-quality digital reception. It offers many channels in several categories. Along with a large selection of different types of music, XM Satellite Radio also allows you to view channel and category selections in the audio display. You may experience periods when XM Satellite Radio does not transmit the artist’s name and or the song title information. If this happens, there is nothing wrong with your system. To listen to XM Satellite Radio, turn the ignition switch to the ACCESSORY (I) or the ON (II) position. Push the power/volume knob to turn on the audio system, and press the button. The last channel you listened to will show in the display. Adjust the volume by turning the power/volume knob. 214 MODE − To switch between the category mode and channel mode, press and hold the DISP/MODE button until the mode changes. The CATEGORY or CHANNEL mode is displayed inverted on the screen. To switch the mode with the interface dial, scroll down, select MODE, and press ENTER on the selector. Push the AUDIO button to display XM information on the screen. To change categories, press the CATEGORY button, or push the interface selector left or right.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project