1 声明 - Credex Alarm Systems

1 声明 - Credex Alarm Systems
NVR Quick Start
1. Statement:


This manual supports NVR model:1U 4/8ch、1.5U 4//9/16ch、2U 9/16/36ch
As product update, the NVR functions might be different from the manual showing, please
follow the product that you got.
2. Safety Precautions
1)
2)
3)
4)
Do not use wet hands or any damp objects to touch the power switch and network digital
video recorder (NVR), in order to avoid electric shock;
After installing the host, it must be ensured that the host and the chassis have grounded to
avoid the video, audio signal being disturbed, and to avoid NVR being damaged by static
electricity;
The device does not include hard disk. Hard disk should be properly installed before use,
otherwise it can not perform the record and playback;
Host system supports format of the hard disk. If the hard disk has been used, please note
whether it is FAT32 format. The embedded network digital video recorder supports only
FAT32 format, otherwise there will be a hidden danger. Note: Please format hard disk when it
is the first time for you to use;
3. Hard Disk Installation
Prepare a screwdriver. Take 1U chassis as an example, this series NVR can have a hard disk
installed in the chassis, the largest capacity of which amounts to 4TB.
3.1
Hard Disk Installation Steps
1、Remove the fix screws on the side chassis
and open the top cover
2. Connect the hard disk data wire and power
supply wire
3.Fix the HDD on the bottom plate
4.Put back the cover and fix it by screws
-1-
NVR Quick Start
4.1 Rear Panel Interface
1U 4/8ch rear panel
1.5U 4/9ch rear panel
1.5U 16ch rear panel
-2-
NVR Quick Start
2U 9/16ch rear panel
2U 36ch rear panel
5.1 Host Side Operation
5.1.1 Start System
Plug power cable, press power switch, the power led will be on and the NVR will start. After
booting, the video output default to multi-window output mode. If the booting time is within the
record setting time period, the system will auto enable the record function.
Notice: Please use the NVR matching power supply instead of any other power supply of any
other type or brand.
5.1.2 System Login
After normal booting, right click to bring the menu, select Start  Login,
input the user name: admin and password blank (default to be blank)
in the input box
-3-
NVR Quick Start
Click
1)
2)
3)
4)
icon,
Power Off: click “Power off” button, the device
will shutdown.
Reboot: click “Reboot” button, the device will
reboot.
Login: click “Login” button , user name: admin,
password: blank
Lock: click “Lock” , the menu will be locked.
5.1.3 IP Channel Setting
After login successfully, system will pop out the host side
IP address setting menu automatically, after setting
successfully click “ OK”, then it will pop out the menu for
IP channel setting, click “ Yes”, the system will save the
IP automatically. If need to manual setting IP address,
click “NO”.
5.1.4 Power Off
1. Click the power switch at the rear panel can shutdown the device.
2. 【Main Menu】【Power Off】
,select 【Yes】(By this way, user need have shutdown authority)
Note: Suggest to shutdown device in this way, it can avoid damaging the device from v
electricity cut-off by accident).
Notice: Before changing the HDD operation, please shutdown the device and cut the power
supply first.
5.2 Display Setting
Click
icon, show the menu as the right side:
1)Resolution setting: the default resolution is 1024x768,
please select the best resolution according the monitor
condition, or it will affect the image definition. There
are 6 modes for option.
-4-
NVR Quick Start
2)Display setting:set monitor lightness, contrast, saturation, color
3) Language:select different language according to the necessary, after that need restart the
device
4) Skin:there are blue and black two color for selection
5) Screen: 1、4、9、16、25、36 screens are optional,
6) Automatic logout time: system automatic logout and lock time,
7) Rotation interval: Setup the time interval of rotation. Tick “Enable SEQ” to start rotation.
6.1 Network Setting
Connect NVR with network cable to the LAN switch,
After power on, click
to enter setting menu, set
NVR IP address, subnet mask, and gateway and so on.
Then use PC to run ping command to check NVR IP has
connected with LAN
Notice: IP address might conflict with each other, please set the gateway correctly, or NVR might
fail to work. Please ensure all the IP addresses in LAN are unique.
Device port setting: the default is 5050, if there are several NVRs in the LAN, need to change
this port is for login NVR by IE, CMS. Login NVR by mobile, the port should be +3 based on the
device port.
HTTP port: the default port is 80, suggest modifying it. This port is for login NVR by IE, input NVR
IP address or domain name; need to add colon and HTTP port number.
Example: show as the above right picture, access NVR by IE in LAN, first add 2 forwarding rules
in the router, the IP address is 192.168.1.188, the forwarding ports are 5050-5053, 80. Please
input http://192.168.1.188:80 at IE browser and download ActiveX, then close the IE before install
the ActiveX, after installing it successfully, then reopen IE with http://192.168.1.188:80, it will show
login menu, input device port:5050, user name: admin, no password, can access NVR.
If access NVR by IE in WAN, please use static IP or dynamic domain name, the operation is same
as LAN.
6. 2 Connect with IP Camera
6.2.1 Manual Search
Right click to select 【IP channelSetting】Manual, click
Search button, NVR will search out all IP cameras in the LAN,it will
take 18-30 seconds, after finishing the configuration, click Save to
logout, then the image will come out.
-5-
NVR Quick Start
A –Area is cameras IP address searching area——click Search to get the camera IP addresses
in LAN
B- Area is camera IP address modification area——double click IP camera in A area, B area will
show camera network data, some cameras can change IP address directly in B area
C- Area is cameras channel setting area——according to the selection sequence in A zone, to
sort the 1-36 channels image order. Select All to add IP cameras to the all channel by one click.
D-Area is camera user name and password filling area——this area is camera network parameter
6.2.2 Automatic Search
Right click to select 【IP channel Setting】Auto
If the IP camera has private protocol with NVR, NVR will assign IP address to the camera
automatically, after finish the searching, will connect the image automatically. Camera IP
addresses will be added automatically in the preview channel area.
6.3 Preview
6.3.1 Drag and Drop the Image
The preview image location can be drag and drop to different place as necessary, but the channel
physical address will keep the same
-6-
NVR Quick Start
6.3.2 Drag to Change Channel Sequence
Right click to select 【IP channelSetting】【Drag to change
channel sequence】, then drag the image as 6.3.1, IP camera will
reconnect in the new channel, during this process, the image will
lost for some while till connect the image connect sucessfully.
6.3.3 Digital Zooming
Zoom In
During image preview and playback, roll mouse
roller to do digital zooming, it zoom the image as
mouse pointer as the center. The max can do 15X
Zoom Out
zooming. Drag the zoomed image by mouse to see
image detail.
The channel is recording. Light flashing means frame lost or recording lost. Please adjust
the code stream, for details, please refer to 6.5.2;
Magnifying glass: digital zooming, the red number in the middle is magnification figures, click
this icon, it can change to PTZ control
-7-
NVR Quick Start
6.4 Manual Capture
Right click to bring main menu, click
【Capture】, it supports all channels manual
capturing. After capture, there is information to hint capturing is successful or failure or
this channel does not support capture. The image of capture resolution is D1 by JPG
format, and it is saved in special area, the recording file will not overlay it. The capture
image can be viewed or backup in file manage folder
Right click to bring main menu, click
【File Manager】and click Refresh button,
the captured file shows in the file list area, the file are named by channel number& capture time,
double click it to check.
Capture back up: plug flash disk by USB port, click Refresh to check whether flash disk connect
well, then select the capture files that need back up, and click Back Up to begin it.
6.5 System Setting
6.5.1 Device Parameter
Click
【Setting】DeviceDevice info to
check device spec. information and time setting
Notice: Attention: select mode according
the
connected IP camera channels and resolution, after
change the model,click save and reboot the device.
When the image is good in 9/16/25/26 screen modes,
after double click the image to zoom, the image is
stuck or become black screen change to 1080 mode
can solve it.
Systerm version: check the system version and time, when do software update, need to check
version first to avoid updating failure and damage the device.
6.5.2 Channel Information
Click
【Setting】ChannelVideo Parameters,
to adjust IP camera preview and recording resolution.
1) Encoding Type: Main Stream (Normal), Sub
Stream, Main Stream (Event) for selection
Main Stream:double click to show single image or full
screens image are main stream, also recording
playback is main stream.
Sub Stream:9/16/25/36 screens display are using
sub stream, IE or mobile reviewing are sub stream also.
-8-
NVR Quick Start
Main Stream (Event):motion detection and alarm trigger recording are using this
2) Stream Type:video, video & audio two type for selection. When connect with audio, please
select video & audio mode, or there is no audio when playback.
3) Resolution:NVR will get IP camera main stream and sub stream resolution automatically,
when the image is not good, can adjust from here according to necessory.
4) Bitrate Type:set variable bit rate and constant bit rate
5)Bitrate: set the bit rate upper limit for coding main stream are 1080P: 6000kbps, 720P:
4000kbps ; set the bit rate upper limit for coding sub stream is 512-1024kbps
6)Frame Rate:suggest to set full frame 25/30
7)Video Quality: suggest to select highest
When all the IP cameras connected with NVR are same brand, after finish setting 1st channel, can
click Copy To to apply the setting to all channels, then click Save.
7.1 Recording
7.1.1 Manual Recording
Right click to bring main menu, click
【Record】to enter record setting.
Manual recording has the highest priority, after performing Manual,
the corresponding channel will begin recording.
7.1.2 Schedule Record
Right click to bring main menu, click
【Setting】ChannelSchedule Record, the default setting is 24
hours recording, user can set the recording plan according to the
necessary and copy it to other channel
Notice: If NVR stop recording in a regular time, please check
schedule record status, the schedule might be in wrong, please
adjust them to manual record.
-9-
NVR Quick Start
7.2 Playback
Right click to bring main menu, click
【playback】to open the menu:
Channel Select:
select the channels that need do playback, system will find the required recording file. The date
that has recording is highlighted by red color in calendar
Date Select: select the playback date
Playback: after choosing the date, 24 hours color bar will show in C area. Different recording way
will show in different color. Adjust the time line by mouse roller between 2 hours, 1 hours, 30
minutes, 5 minutes and 1 minute. The playback time can be specified to second
Pause: pause the playback at present
Stop: stop the playback
7.3 Record Backup
Before back up,please make sure the hard disk has been saved with video.
Playback Backup: click Back Up icon in area C of 7.2 Playback
Preview Backup: Right click bring main menu, click
【Backup】to enter the backup interface,
as right picture shows
Video backup best way is to play back recorded video
firstly, then select the backup time and channel,
insert the USB memory to backup.
- 10 -
NVR Quick Start
Insert a USB external storage device, click Refresh to detect USB devices. There are three
backup file format: H.264, MP4, AVI.Recommend back up to MP4 format which can use document
management to check the backup file, and computer player to play.
Precise Backup: the mini.backup time can be one second.
Fast Backup: high-speed transmission, saving backup time;
7.4 File Manager
Right click to bring main menu, click
【File Manager】icon, the back up file
of external storage device and local
captured picture will list in the folder.
1) Check photo in the hard disk: select
date on calendar, if there was capture in that
day ,then it would be displayed in list form;if no
capture,then no display information.
2) Check the U disk and other mobile
storage
devices:
click
Refresh
,then
drop-down
to select U disk paths, the photos and videos in the disc will be displayed, double-click it to
check. You can capture also when you view the video, the captured photos are stored in the hard
disc of that very day.
7.5 System Setting
7.5.1 HDD Setting
Right click ,click
【Setting】SystemHDD setting
In order to ensure a linear drive file management to better identify and write disk space
Recommend to format the HDD first before the recording, format the hard drive safe and fast, to
end with about 1-3 seconds.
7.5.2 System Upgrade
- 11 -
NVR Quick Start
【Setting】SystemUpdate,insert the USB storage device into the
Right click mouse, click
NVR, click Browse to find the upgrade file, and click Upgrade.
Upgrade include:firmware upgrade,boot screen image upgrade,patch upgrade.
Except USB memory upgrade, it also support upgrade by network.
Note:when the NVR is upgrading,don’t perform any other operations or power off, otherwise NVR
will fail to enter the system ,and have to send back to factory for repairing.
After upgrading,the device need to be rebooted.
7.5.3 Import-Export Configuration
Right click mouse,click
【Setting】SystemRecovery Configuration。
The following two situations can use the Import and Export configuration:
1. NVR firmware upgrade or restore the default settings;
2. Sever NVRs’ configuration are same, just connect
Different IP camera, need to save the configuration
time
【Export Configuration】: Export equipment parameters ,
and save it in the assigned place of U disc;
【Import configuration】: Open the menu in the NVRs
that need the same configuration,import data of U disc
to copy the NVR conf iguration.
8.1 IE Viewing.
8.1.1 Router Setting
Because the router brands and models are various , now we take TP-LINK router as an example.
1) Open the IE explore , enter the Gateway in the address, eg: http://192.168.1.1
2) In the open page ,enter the user name and password , the default user name of TP-Link
is :admin , password is admin.
3)Click the “Forward rule” in the left side tool option, in some router called “mapping port “.
Click “Virtual server”, click “add new”
Manually enter the port and click save.
The port in Forwarding rule is same as the “device port and HTTP port “ in the NVR setting.
Take P5 6.1 network setting as example , it is 5050-5053,80
- 12 -
NVR Quick Start
Finish the adding , click “ enable all the rule”
Take 3322 as example , the Domain is www.3322.org, go to 3322 , enter the information and
remember the domain which you have successfully registered.
Att:the domain, user name and password need to put in the DDNS Setting in DVR/NVR.
Back to the IE explore and enter the domain, and add the colon +http port
8.1.2 User Log In
1)Enter the domain+colon+Http port . or enter the static IP +colon +http port .
2)You can download and install IE ActiveX from NVR through the Internet. Then input
the IP address of the NVR in the IE browser, port number 5050, user name and
password, then the below interface will pop-up:
8.1.3 IE Operatio
The operation of IE is same as in the local NVR.
Remark: open the preview, click the right bottom
red point represent recording , and click
to let it change to
or right click to Open All , the
to set the stream and switch of main stream and sub stream.
9.1 Mobile View Operation Instruction:
This operation guide is about how to install and use the mobile softwares in the
mobile phones with Android, Blackberry, windows mobile, iPhone, Symbian software.
Att:The mobile port is the device port +3, like :Device port , 5050, then the mobile port is 5053
9.1.1 Client Software Obtaining
You can obtain the mobile surveillance client software from the CD or our
technical department. The corresponding client software of each system is as
below:
MEYE_SB_S60_3rd.sisx: mobile surveillance client of the 3rd version of Symbian
S60 system;
MEYE_SB_S60_5rd.sisx: mobile surveillance client of the 5th version of Symbian
- 13 -
NVR Quick Start
S60 system;
MEYE_WM.cab: mobile surveillance client of Window system;
MEYE_Android.apk: mobile surveillance client of Android system;
MEYE_RIM.rar: mobile surveillance client of BlackBerry system;
Note: iPhone uses TMeye+, downloaded from appstore.
9.1.2 The Parameter Settings of the NVR which Supports Mobile Surveillance
Resolution: CIF or QCIF;
Frame Rate: 5-10fps;
Stream Type: Limited
Stream: 64-256Kb/S
Remark: you can adjust the settings according to the performance and network condition. Mobile
phone with higher performance and network condition will display better effect. If the network
condition is not good, you can reduce the frame rate to ensure the fluency.
9.1.3 Android Mobile Phones System
Android mobile phones system
Mobile phone app supports Android system above V1.5, including
HTC G1, HTC Magic, HTC Hero, HTC G5, etc.
☆ Instructions:
1) Download app MEye_Android.apk.
2) Click the app and install.
3) Open the app, as the picture on the right:
9.1.4 Blackberry Mobile Phone System
Mobile phone app supports Blackberry phones system above V4.6, with screen resolution
480*360 and 480*320, including model No. 8900, 9000, 9700, 9630 etc.
☆ Instruction:
1) Download and install vMEye.cod & vMEye.alx via
BlackBerry Desktop Manager. Click ‘options’ and find
vMEye in application, then click and find edit privilege
to set all privileges as allow. If a part of privileges can’t
be set-up as allow, you just ignore it and click save.
2) Clinck vMEye icon, the initial interface will be shown( as
the picture on the right) after running few seconds of the
programme
Name: Enter name of device in order to distinguish other more devices.
- 14 -
NVR Quick Start
Address: The IP address or DDNS of DVR/ NVR.
Port: The server port of DVR/NVR
User ID: Same as set-up on IE
Password: Same as set-up on IE
Network Type: Select your ideal network type.
3. Click login to access main interface.
9.1.5 Windows Mobile System
Mobile client software supports 2003 windows mobile system version
and above. Currently it only supports touch screen version.
☆ Installation and Operation Instruction
1) The Installation is carried out by copying to the phone
with data cable via MEYE_WM.cab.
2) Click the corresponding icon appeared as right:
9.1.6 APPLE IOS System
Apple phone needs to support iOS 3.0 or above,
including iPhone, iPod touch, etc.
☆ Installation and Operation Instruction
1) Run App Store in iPhone, and switch to the search tab.
Search vMEye in the search tab, the app installation pack
will be found, click to installation and the program icon
will arise as below:
2) Click vMEye program icon,
and the initial interface after running appears as right:
Attached: NVR Faults and Troubleshooting
1. Device Fails to Start or Restart Continuously
2. Failure to Use Remote Controller
Possible Reasons:
1) NVR’s upgrading wrong program leads to the
damage of system software.
2) NVR encounters power or board faults,
please contact the supplier for repair.
3) HDD error, please change another HDD.
4) Panel program wrong choice: Setup→Device
Parameter→Setup
Information→Interface
Version. Aluminum panel please choose MINI.
Other plastic panels choose corresponingly
01, 02, 05, etc.
- 15 5) NVR IP address conflict.
Possible Reasons:
1) Please check whether the batteries in
Remote Controller are installed correctly,
especially the postive and negative.
2) Please check whether the batteries in
Remote Controller are still charged.
3) Please check whether the Remote
Controller window is hidden.
4) Please check the Remote Control
address in NVR is matched with Remote
Controller address.
NVR Quick Start
3. Blurred NVR preview screen
4. Internet disconnected to NVR.
Possible reason:
Unmatched video input feature. If the
camera uses NTSC, but the NVR uses
PAL, this could lead to a blurred screen.
Possible reasons:
1) Please check if your physical network is
normal or not.
2) Please check your NVR parameter setting.
3) Please if there is IP conflict.
5. Blurred playback screen/ fail to search
recording file
6. Cannot normally play downloaded
backup videos.
Possible reasons:
1) Program misread. Please reboot the NVR.
2) Bad track or bad cluster in the hard disk data.
Please detect your hard disk and change a new
one if broken.
3) NVR hardware fault. Please contact your
supplier.
Possible reasons:
1) Player installing mistake.
2) Wrong USB flash disk or wrong mobile hard
disk drives file system.
3) No DX9.0 or higher diagram speedup.
7. I set all the mobile detector alarm, occlusion alarm and video occlusion right, but why does it
still not work?
It might because the ONVIF of your IPC does not support such functions.
8. No IPC searched, why?
It might because your NVR or IPC is disconnected to internet. Please try to check if your device is
right connected to internet, or check if there is a IP conflict.
9. There is no sound when preview or playback the NVR, why?
1) Check if there is an audio in your IPC: you can test it through IE or the built-in client or through
computer.
2) Wrong audio format: NVR only supports G711 audio compressed format. Please adjust your
format through IE of the built-in client.
10. There is no diagram after being saved.
It can be a wrong username or password. It might also because the camera gun may use a
proprietary protocol leading to incompatibility. Suggestion: use camera guns that support i8 or
other proprietary protocol or the internationally agreed ONVIF.
11. There is a videotape prompt of a certain diagram and also have images when double clicked,
but there I no image in multi-channel preview, why?
- 16 -
NVR Quick Start
Click that channel with your right-hand button and there is a pattern pull-down list in the Remote
Configuration, try to replace the main stream with a sub stream and save it. If there is still no
image, it might because the sub stream is set too high, below 1m is suggested.
12. A multi-channel preview is normal, but double-click on the single picture, it turn to black screen
or the image stuck, unable to playback the video.
Please check whether your IPC is 1080 p, if yes, then click on the Settings - > device parameters
- >pattern, and see if you can use 1080 pattern. 1080p videos can only display sub stream under
the 720P channel pattern. Please set 1080p IPC to the specified channel. Select the correct mode
and reboot OK.
13. Why fail to login the IE viewing?
Please set up according to the following method:
1) IE setting--Internet options--Security--Custom level--enable all relevant options of ActiveX
2) Find and delete original plguin file “dvr_activex” firstly ,then download and install it correctly
again
- 17 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising