OMAP 3 Family of Multimedia Applications

OMAP™ 3 family of
multimedia applications
processors
Revolutionizing entertainment and productivity
in wireless handheld commumications
Key features
Product Bulletin
The OMAP™ 3 family of multimedia applications processors from Texas Instruments (TI)
introduces a new level of performance that enables laptop-like productivity and advanced
entertainment in multimedia-enabled handsets. OMAP 3 devices support all levels of
handsets, from the entry-level multimedia-enabled handsets to high-end Mobile Internet
Devices (MIDs).
Entry-level
multimedia-enabled
handsets
OMAP3410
OMAP3610
Mid-level
multimedia-enabled
handsets
OMAP3420
OMAP3620
TI’s OMAP 3 family of applications processors
integrate the ARM Cortex-A8 superscalar
microprocessor core, delivering up to 3x the
performance of ARM11-based processors.
This processor family leverages industryleading technologies to provide outstanding
mobile phone battery life with the performance
needed for laptop-comparable productivity
software, along with an audio-video experience equivalent to that of consumer
electronics devices.
Overview
The OMAP 3 family of processors opens new
areas for compelling mobile applications that
will revolutionize handheld communications in both work and play. The OMAP34x processor family includes the industry’s first applications processor to be designed in a 65-nanometer (nm) CMOS process technology, reflecting TI’s commitment to
providing advanced silicon technology to drive a revolution in mobile communications.
High-end
multimedia-enabled
handsets
OMAP3430/3440
OMAP3630/3640
These devices can operate at a higher
frequency than previous-generation OMAP
processors, while lowering the core voltage
and required power with features to prolong
battery life.
For OEMs and ODMs looking for even greater processor performance and lower
power consumption, TI’s new OMAP36x processor family provides the same or better features as OMAP34x processors, but
with increased processor performance and
decreased power consumption.
For example, multimedia applications benefit from faster, high-quality image capture
and processing for cameras; exceptional
audio/video performance; innovative user
interfaces; and enhanced support for external
displays and high-speed connectivity interfaces. Also, extensive mobile security guards
the increasingly important role of wireless
handsets in e-commerce, while still being
compatible with a wide range of modems.
•Combines mobile entertainment and high-performance productivity applications.
•Integrates the advanced Superscalar ARM
Cortex-A8 RISC core, enabling up to 3x gain in performance versus ARM11.
•Designed in 45-nm (OMAP36x platform) and 65-nm (OMAP34x platform) CMOS process technologies for less power consumption and increased device performance.
•Includes integrated IVA hardware
accelerators to enable multi-standard encode
decode up to HD resolution.
•Available integrated image signal processor (ISP) enables faster, higher quality image capture, lower system cost and lower power consumption.
•Provides seamless connectivity to hard diskdrive (HDD) devices for mass storage.
•Leverages SmartReflex™ technologies
for advanced power reduction.
•Assures mobile security with M-Shield™
mobile security technology capability enhanced with ARM TrustZone support.
•Shares fully scalable software solution with all OMAP 2 processors.
•Supports all high-level OSs for customizable interfaces, including Linux, Microsoft Windows Mobile, Open Handset Alliance Android and Symbian.
•Packaging: 12 mm x 12 mm or 14 mm x 14 mm MicroStar BGA™
integrated circuit packages, memory-stackable.
The OMAP 3 processor family fully supports
memory stacking through package-onpackage technology, with stackable 12 mm x
12 mm or 14 mm x 14 mm, 515 lead ball-grid
array (BGA) packages.
OMAP34x processors
Features
OMAP3430
OMAP3440
General-purpose
processor
Image, video,
audio accelerator (IVA)
OMAP3410
ARM Cortex-A8 RISC core
IVA 2+
2D/3D graphics
accelerator
IVA 2
IVA 2
POWERVR SGX™
POWERVR SGX™
N/A
12
5
3
XGA/WXGA
XGA/WXGA
XGA/WXGA
Composite, S-video
Composite, S-video
Composite, S-video
VGA
VGA
Integrated image-signal
processor
Camera resolution
(megapixel)
Display resolution
TV out
OMAP3420
DVD/HD
Multimedia class
M-Shield™ mobile
security
SmartReflex™
technology
Available in all
Available in all
12 mm x 12 mm BGA memory-stackable package
14 mm x 14 mm BGA memory-stackable package
Packaging
OMAP36x processors
Features
General-purpose
processor
Image, video,
audio accelerator (IVA)
2D/3D graphics
accelerator
Integrated image-signal
processor
Camera resolution
(megapixel)
Display resolution
TV out
Multimedia class
M-Shield™ mobile
security
SmartReflex™
technology
Packaging
OMAP3630
OMAP3640
OMAP3620
OMAP3610
ARM Cortex-A8 RISC core
IVA 2+
IVA 2
IVA 2
POWERVR SGX™
POWERVR SGX™
N/A
12
12
12
XGA/WXGA
XGA/WXGA
XGA/WXGA
Composite, S-video
DVD/HD
Composite, S-video
Composite, S-video
VGA/DVD
VGA/DVD
Available in all
Available in all
12 mm x 12 mm BGA memory-stackable package
14 mm x 14 mm BGA memory-stackable package
A new level of performance
The OMAP3430/3440 and OMAP3630/3640
processors are the first processors in the
industry to integrate the superscalar ARM
Cortex-A8 core . With features such as deeper
pipelines, a dedicated level-2 cache and
execution of up to twice as many instructions
per clock cycle, the high-performance ARM
processor provides the processing power to
support high-quality productivity applications
and faster user interfaces.
Mobile workers will be able to access databases, work on spreadsheets and presentations, use e-mail, send instant messages, browse and download content from the Web, attend videoconferences and
play audio-video clips faster. Outstanding
graphics capabilities will also be possible,
thanks to the ARM’s integrated vector floating-point acceleration working with the
OMAP3x platform’s dedicated 2D/3D graphics
hardware accelerator. This feature makes
innovative user interfaces and console-quality
gaming possible.
In addition, OMAP3430/3440/3630/3640
processors integrate advanced IVA 2+ acceleration with new support for critical-coded
functions. A second-generation, power-optimized version of the imaging, video and audio
accelerator used in TI’s DaVinci™ technology,
IVA 2+ improves multimedia processing up to 4x from previous OMAP processors.
The increased capabilities of IVA 2+ enable
multi-standard (MPEG-4, H.264, Windows
Media Video) encode and decode at DVD, up to HD resolutions. With the advanced multimedia capabilities of these OMAP processors, a multi-standard DVD- or HD-quality camcorder can be added to a
phone for the first time. In addition, IVA 2+
advances video teleconferencing by providing H.264-based video at greater than
CIF resolutions.
OMAP3430 and OMAP3630 System architecture
NaviLink™
GPS
Fast
IrDA
Hollywood™
Mobile DTV
WiLink™
mWLAN
Trace
Analyzer
Emulator
Pod
Trace
JTAG/
Emulation
I/F
UART/IrDA
NAND
Flash
Mobile
DDR
SDRC
GPMC
I2C
OMAP3430/OMAP3630
SPI
ARM®
Cortex™-A8
IVA™ 2
Hardware
accelerator
SDIO
2D/3D graphics
accelerator
Image Signal
Processor (ISP)
GPIO
GPIO
Camera I/F
Serial-Parallel
Camera
Module
Camera-Serial
Sub Camera
TWL5030
I2C
Coexistence
BlueLink™ Data
Bluetooth®
Voice
NOR
FLASH
Shared Memory Controller/DMA
UART
McBSP
Timers, Interrupt Controller, Mailbox
McBSP
McBSP
Boot/Secure ROM
USB
3G/4G
modem
M-Shield™ Security Technology: SHA-1/MD5,
DES/3DES, RNG, AES, PKA, Secure WDT, Keys
McBSP
MS/MMC/SD/SDIO
MS/MMC/SD/SDIO
Card
Video DAC
s-video
TV
PAL/NTSC
High-Speed (HS)
USB2 OTG Controller
Display
Controller
Parallel-Serial
QCIF
QVGA
Color TFT Color TFT
Display
Display
OMAP3440 and OMAP 3640 processors
Device features
• IVA Hardware accelerator
IVA 2+ accelerator enables multi-
standard (MPEG-4, H.264) encode/
decode and WMV9 encode at D1 (720 x 480 pixels), 30 fps
Up to 720p HD resolution
• Imagination Technologies’ POWERVR™ SGX architecture supports OpenGL
ES1.1, OpenGL ES2.0 and OpenVG
• Integrated image signal processor (ISP) enables up to 12 megapixels of still image capture
• Flexible system support:
Composite and S-video TV output
Up to XGA (1024 x 768 pixels) / WXGA (1280 x 800), 24-bit, 16-million color display support
Battery
Charger
System Interface
Power Reset
Clock Manager
MIPI® and FlatLink™ low-voltage differential signal (LVDS) transmitter/
receiver 3G-compliant serial/parallel display support.
– OMAP3630/3640 processors do not support FlatLink3G
Four high-speed USB 2.0 host ports:
– One high-speed USB 2.0 On-The-Go (OTG) port
– Three high-speed USB 2.0 TLL interfaces
• HLOS support for customizable interfaces: Linux, Microsoft Windows Mobile, Open Handset Alliance Android and Symbian
• Optimized audio and energy-management companion chip: TWL5030
SPI
TSC2046 Touch
Screen Controller
Power Manager
Voice
Audio
Audio/Voice
Codec
On/Off
Reset
32 kHz Crystal
Audio
In/Out
HS USB
Transceiver
Key Pad
USB
Connector
LED
Keypad
Battery
OMAP3420/3620 processors meet the
needs of multimedia-enabled handsets
OMAP3420/3620 processors are designed
to meet the needs of the multimedia-enabled
handsets market, including up to VGA/
DVD quality video record and playback, up
to 12-megapixel still image capture, music
playback and 3D gaming.
OMAP3420/3620 processors share many
of the advanced productivity and multimedia
technologies present in other OMAP 3 devices, including 65-nm (OMAP34x platform)
or 45-nm (OMAP36x platform) CMOS process technology, the ARM Cortex-A8 superscalar microprocessor core, and the IVA 2 accelerator.
OMAP3420/3620 processors also embed Imagination Technologies’ POWERVR
SGX graphics core, supporting OpenGL ES
1.1, OpenGL ES 2.0 and OpenVG to deliver
exceptional graphics performance. In addition,
OMAP3420/3620 processors are software-
compatible with all OMAP 2 and OMAP 3
processors, allowing a fully software-scalable
solution.
With the inclusion of IVA 2, one of TI’s
advanced hardware accelerators, OMAP3420
and OMAP3620 processors provide up
tor, provides outstanding gaming capabilities as well as unique user interfaces.
IVA 2 enables advancements in video teleconferencing with capabilities of performing MPEG-4 based video teleconferencing at
greater than CIF resolutions.
to VGA/DVD quality video camcorder and
playback for all popular standards, such as
MPEG-4, Windows Media Video 9, H.264 and
RealVideo 10. In addition, the ARM’s vector
floating-point acceleration, coupled with the
dedicated 2D/3D graphics hardware accelera-
OMAP3410 and OMAP3610 System architecture
NaviLink™
GPS
Fast
IrDA
Hollywood™
Mobile DTV
WiLink™
mWLAN
Trace
Analyzer
Emulator
Pod
Trace
JTAG/
Emulation
I/F
UART/IrDA
NOR
FLASH
NAND
Flash
Mobile
DDR
SDRC
GPMC
I2C
OMAP3410/OMAP3610
SPI
ARM®
Cortex™-A8
Shared Memory Controller/DMA
BlueLink™ Data
Bluetooth®
Voice
UART
McBSP
USB
3G/4G
Modem
McBSP
McBSP
Camera-Serial
Sub Camera
McBSP
Boot/Secure ROM
MS/MMC/SD/SDIO
Display
Controller
Parallel-Serial
MS/MMC/SD/SDIO
Card
QCIF
QVGA
Color TFT Color TFT
Display
Display
TWL5030
I2C
Battery
Charger
System Interface
Power Reset
Clock Manager
McBSP
High-Speed (HS)
USB2 OTG Controller
SPI
TSC2046 Touch
Screen Controller
OMAP3420 OMAP3620 processors
Device features
• IVA 2 accelerator enables VGA
(OMAP3420) to DVD OMAP3620
video content playback up to XGA/WXGA (OMAP3620) display resolutions
• Imagination Technologies’ POWERVR™ SGX architecture supports OpenGL ES1.1, OpenGL ES2.0 and OpenVG
• Integrated ISP enables 5 megapixels (OMAP3420) to 12 megapixels (OMAP3620) of still image capture
• Flexible system support:
Composite and S-video TV output
Display support:
– OMAP3420/3620: XGA (1024 x 768 pixels) / WXGA
(1280 x 800 pixels), 24-bit, 16-million color display support
Camera
Module
Timers, Interrupt Controller, Mailbox
M-Shield™ Security Technology: SHA-1/MD5,
DES/3DES, RNG, AES, PKA, Secure WDT, Keys
GPIO
Camera I/F
Serial-Parallel
IVA™ 2
Hardware
accelerator
SDIO
Coexistence
GPIO
MIPI and FlatLink 3G-compliant serial display, parallel display support
– OMAP3620 do not support FlatLink3G
Four high-speed USB 2.0 hosts:
– One high-speed USB 2.0 On-The-go (OTG) port
– Three high-speed USB 2.0 TLL interfaces
• HLOS support for customizable interfaces: Linux, Microsoft Windows Mobile, Open Handset Alliance Android and Symbian
• Optimized audio and energy-management companion chip: TWL5030
• Optimized cellular connectivity solutions with the WL127x WLAN + Bluetooth and NL55xx GPS + Bluetooth products
Power Manager
Voice
Audio
Audio/Voice
Codec
On/Off
Reset
32 kHz Crystal
Audio
In/Out
HS USB
Transceiver
Key Pad
USB
Connector
LED
Keypad
Battery
Basic multimedia-enabled handset
performance needs met
OMAP3410/3610 processors meet the needs
of mass-market multimedia-enabled handsets,
which include CIF (OMAP3410) and up to DVD (OMAP3610 processor)-quality video
record and playback, up to 12-megapixel still image capture, music playback and 3-D gaming.
The lowest cost member of the OMAP 3
family, OMAP3410/3610 processors share
many of the technologies of other OMAP 3
devices, including 65-nm (OMAP3410
processor)/45-nm (OMAP3610) CMOS process technology, the ARM Cortex-A8 superscalar microprocessor core, and the IVA 2 hardware accelerator for a rich multimedia experience and targeted general-purpose processing.
In addition, OMAP3410/3610 processors are software-compatible with all OMAP 2 and OMAP 3 processors, allowing a fully software-scalable solution.
With the inclusion of IVA 2, one of TI’s advanced hardware accelerators, the
OMAP3410 processor provides VGA quality video camcorder and playback for all
popular standards, such as MPEG-4, Windows
Media Video 9, H.264 and RealVideo 10.
The OMAP3610 processor is able to provide
up to VGA/DVD quality video camcorder and
playback for the same standards. Additionally,
the IVA 2 accelerator on OMAP3410/3610
processors enables MPEG-4 quality video
conferencing at greater than QCIF resolutions.
OMAP 3 processors’ image capture,
display and storage
An integrated image signal processor (ISP)
offers a means for quality differentiation, PCB
area savings, reduced BOM (bill-of-materials)
costs, lower system power and design flexibility. The on-chip camera image pipeline
eliminates the need for external circuitry for
image capture and processing, while the image pipeline provides configurable quality
for sharper, clearer pictures.
Camera sensors up to 12 megapixels in size can be accommodated for higher quality images with faster shot-to-shot performance. On-the-fly JPEG compression aids in
throughput and storage, while power-reduction
features save battery drain in preview mode.
Support for serial and parallel sensors provides design flexibility.
OMAP 3 processors support high-quality
outputs as well as inputs, enabling easy sharing of multimedia content. Composite and S-video outputs provide flexible connectivity
options to extend to TV displays and projectors. For handheld displays, the OMAP 3
processor family can support up to XGA/WXGA resolutions and 16 million colors. The device
can also interface to MIPI-compliant serial and
parallel displays for use in mobile handsets.
OMAP 3 processor power conservation
The OMAP 3 processor family leverages the
most advanced and effective power management techniques in the market. The chips
make exhaustive use of TI’s SmartReflex™
technology for power and performance
management, which include a broad range of
intelligent and adaptive hardware and software
techniques that dynamically control voltage,
frequency and power based on device activity,
modes of operation and temperature.
SmartReflex technology in OMAP 3 processors alleviates chip-level leakage power
dissipation at 65 nm and 45 nm, allowing the
device to have ultra-low active and standby
current drain, thereby saving critical battery
power.
A companion device to the OMAP 3
processors, the TWL5030 audio and energy
management chip maximizes battery life
and boosts system performance in mobile
phones that use batteries based on lithiumion, lithium-ion polymer or cobalt nickel
manganese chemistries. The highly integrated
TWL5030 combines SmartReflex technologycompliant voltage regulators and converters,
a high-fidelity audio/voice codec, class-AB/D
audio amplifiers, a high-speed USB 2.0 OTG
transceiver and battery charger circuitry onto
a single chip, significantly reducing board
space and system cost while managing power
consumption efficiently.
OMAP 3 platform security
TI’s M-Shield™ mobile security technology
enables robust protection of premium copyrighted digital media content, secure protocol
applications and e-commerce applications
such as ticketing, banking, brokering and
shopping.
Enhanced with ARM TrustZone support, the
OMAP 3 processor security offering is based
on open APIs and provides an environment for
secure applications that deliver robust performance, interoperability, greater development
speed and large economies of scale.
As the advanced hardware and software security framework for the OMAP 3 processors, M-Shield technology enables new
value-added services and increased terminal
security, allowing operators, content providers and manufacturers to secure sensitive
assets and usage rights for protection against
revenue loss. Features include secure flashing
and booting so that only authorized software
can be loaded on the handset, while terminal identity protection makes stolen phones
useless and network lock protection prevents
users from arbitrarily switching networks on
the Web.
OMAP 3 platform HLOS support
The OMAP 3 family of processors supports all
high-level operating system (HLOS) platforms,
including Linux, Microsoft Windows Mobile,
Open Handset Alliance Android and Symbian
operating systems. HLOS platforms enable
manufacturers and mobile operators to differentiate their products through an easy-to-use,
customizable interface and a robust, flexible
architecture for applications and services. TI
was the first wireless system vendor to offer
all major HLOS platforms on mobile phones.
Complete systems expertise
TI’s integrated, proven wireless connectivity
solutions ensure multi-mode operation and access to a variety of wireless network connections for service any time and anywhere on a variety of wireless networks.
TI’s highly integrated BlueLink™ semiconductor Bluetooth® technology, mobile WiLink™
WLAN and GPS hardware and software
are developed with a full understanding of
the complete mobile phone system to give
handset manufacturers a distinct competitive
advantage. TI is also looking to the future by
driving development of future mobile connectivity features for mobile phones.
In-depth development support
The OMAP 3 family is backed by TI’s extensive
development support. Code compatibility with
other OMAP processors makes it easy to port
software, and a sophisticated development
environment speeds programming for all
on-chip processors. In addition, OMAP 3 processors are supported by the OMAP platform
ecosystem, comprising the OMAP Developer
Network and OMAP Technology Centers (OTC),
as well as systems integrators, development
tool providers and leading content providers
worldwide.
The OTC program has been extended to
include support for TI’s WiLink WLAN and
BlueLink Bluetooth technologies. TI’s OTC
program provides a system-level approach
with support for the OMAP platform and
non-cellular wireless solutions to give handset
manufacturers and developers access to a
broad range of wireless systems expertise. For
more information about independent OMAP
Technology Centers (OTCs), TI’s extensive network of specialized system integrators skilled
in all aspects of HLOS porting and integration,
see www.ti.com/omapotcs.
Availability disclaimer
The OMAP34x and OMAP36x processor families are intended for high-volume OEMs and ODMs and are not available through
distributors. If your company meets this
description, please see the following contact
information.
For more information
To learn more about the OMAP3x processor
family, including OMAP34x, OMAP36x or other
OMAP applications processors from TI, see
www.ti.com/wireless. Find out how OMAP
3 processors can open a revolutionary new
world of compelling applications for your next
product.
To learn more about OMAP 3 processors
for outside the wireless market, see
www.ti.com/omap35x.
Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and
conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no
liability for applications assistance, customer’s applications or product designs, software performance, or infringement of patents. The publication of information
regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
The platform bar, DaVinci, OMAP, M-Shield, MicroStar BGA, SmartReflex, FlatLink, BlueLink and WiLink are trademarks of
Texas Instruments. All other trademarks are the property of their respective owners.
© 2009 Texas Instruments Incorporated
B010208
SWPT024B

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project