Support Equipment

Support Equipment
Support Equipment
Small Tactical Terminal
ViaSat provides a range of equipment
to help test, integrate, and deploy the
Small Tactical Terminal (STT) Link 16
and UHF/VHF Networking
LAB EQUIPMENT
DEPLOYABLE RACKS
CABLES AND ACCESSORIES
» Control and Interface Unit (CIU)
including all interconnected
cables, power supply, fan tray,
and Keypad Display Unit (KDU)
» Portable and sized for vehicles
and small boats, the ViaSat
Move Out/Jump Off (MOJO)
kit is a complete line-of-sight
and beyond-line-of-sight
communications package for
on-the-move and on-the-pause
land, air, and sea applications
» Fan tray assembly
» Link 16 RF cables
» Power cords
» Microphone and headset
voice controls
» Integration kits for field
service engineers
Lab Equipment
The ViaSat STT Control and Interface Unit (CIU) is a
rack-mountable enclosure providing all power, cooling,
cabling, and control functions needed to operate the
STT in a lab environment. Setup is simpl; insert the
STT directly into the integrated fan tray and lock it in
place, connect the CIU cables to the STT, then turn
the master power on/off switch on and you’re ready
to begin operations.
STT CONTROL AND INTERFACE UNIT (CIU)
SPECIFICATIONS
Dimensions
10.5 x 19 x 17 in. (H x W x D)
(size excludes connectors and fasteners)
Weight (Approximate)
18 lb
Electrical Input Power
100 to 264 VAC, 47 to 63 Hz, 315 W (Max)
Front Panel Controls and Interfaces
A Harris KDU mounts on the front panel of the CIU. Separate power on
indicators are provided for Channel 1 (UHF/VHF or Link 16) and Channel
2 (UHF/VHF). Link 16 communications health is identified by a dedicated
indicator. Front panel connectors and switches include:
» Ethernet Host (RJ45)
» Zeroize
» USB (B)
» LTTI
Rear View
» DTE Waveform (DB 25)
» IFF Emergency
» Red Console (DB 9)
Rear Panel Connections
The rear panel provides an EMI-filtered AC Power Input for the embedded
28 V power supplies, an input connector for the 1 pulse per second external
time reference, and a 28 VDC auxiliary input for external power. Available
maintenance ports and BNC connectors for the Link 16 differential discretes:
» Message Transmit (output pulse)
» Pulse Transmit (output pulse)
» Receiver Suppression (input pulse)
» IPF Monitor Suppression
(input pulse)
» Transmit Suppression
(input pulse)
ORDERING INFORMATION
PN: 1115296
Front View
STT Control and Interface Unit
STT not included
STT CONTROL AND INTERFACE PANEL (CIP)
HIGHLIGHTS
The ViaSat STT CIP is a rack-mountable enclosure for use in a
standard 19 in. rackmount environment. The STT CIP provides mounting
provisions, cabling, and control functions and status indicators needed
to operate the STT. Setup is simple; connect the CIP to 28v DC power,
connect the external cable set (provided) to both the CIP and STT, then
turn the master power on/off switch on and you’re ready to
begin operations.
Rear View
Front and Rear Panel Controls and Interfaces
A customer provided Harris KDU can be connected to the front panel
of the CIP. Separate power on indicators are provided for Channel 1
(UHF/VHF or Link 16) and Channel 2 (UHF/VHF). Front and rear panel
connectors and switches include:
» Ethernet Host (RJ45)
» Zeroize
» USB (A)
» LTTI
External Cables Provided
» CBL ASSY, W1 EXTERNAL
Front View
» CBL ASSY, W2 EXTERNAL
» CBL ASSY, W3 EXTERNAL
» CBL ASSY, W4 EXTERNAL
» DTE Waveform (DB 25)
» IFF Emergency
» Red Console (RJ45)
» Channel 1 & 2 power on/off
» CBL ASSY, W5 EXTERNAL
» CBL ASSY, W10 EXTERNAL
» CBL ASSY, W20 FAN POWER
» CBL ASSY, W60 CIP POWER
ORDERING INFORMATION
PN: 1186823
See datasheet STT Support Equipment for more information
Deployable Equipment
MOVE OUT/JUMP OFF (MOJO) KIT
SPECIFICATIONS
Dimensions (W x H x L)
» Transit Configuration
» Operational Configuration
Front Panel
22.5 x 16.4 x 34.5 in.
(With front and rear lids installed)
22.5 x 16.4 x 28.5 in.
(With front and rear lids removed)
Weight
» Transit
180 lb
» Operational
150 lb
Electrical Input Power
» AC Input
80 to 265 VAC, 47 to 800 Hz
» DC Input
+9 to +30 VDC
An integrated system for creating a mobile air/ground communication
gateway. This system includes a ruggedized rackmount trasit case,
integrated power DC/DC 600 W power supply with main power on/off,
20 W VHF/UHF amplifier, chassis cooling fan, LED Indicators for power,
mounting and power provisions for a ruggedized DTech Labs TXC-4 server/
router, and power/host interface and mounting provisions for a RT-1720/
RT-1915 EPLRS/SADL radio.
FRONT PANEL CONTROLS AND INTERFACES
The kit’s front panel contains separate LED status indicators for main
power, STT channel 1 and 2 power, and UHF amp power. In addition, the
front panel houses all the necessary interfaces to support STT operation.
These interfaces are provided by the following connectors/switches:
Rear Panel
» Main power switch
» STT CH1 and CH2 power on switches
» STT Link 16 Long Term Transmit Inhibit (LTTI) switch
» STT zeroize switch
» STT VHF/UHF amp power on switch
» DC main power connector (D38999)
» STT CH1 and CH2 KDU connectors (Fischer-type that accommodates
standard external KDU cable)
» STT CH1 and CH2 audio/fill connectors (standard GC-type that
accommodates standard crypto fill devices and H-250 handsets)
» STT CH1 and CH2 Ethernet and console connectors (RJ-45)
» STT L16 RF connector (TNC)
» STT VHF/UHF connector (TNC)
» STT DTE waveform connector (DB-25F)
» EPLRS/SADL Ethernet connector (RJ-45)
ORDERING INFORMATION
PN: 1218485
MOJO CR V2 with Wideband
Enabled STT
PN: 1218486
MOJO CR V2 with Tactical Router
PN: 1218487
MOJO CR V2 with Wideband Enabled STT
and Tactical Router
ViaSat STT Support Equipment
Do you need to control a terminal in the field without
a lot of bulky equipment? The ViaSat ruggedized STT
Control Plug Set contains 3 control plugs to interface
with the STT J1/J2/J3 connectors. The J1 and J2 control
plugs allow host interface via Ethernet, Serial or USB
using standard RJ-45 and USB Mini-B cables/connectors.
The J3 control plug allows Channel 1 and Channel 2 On/
Off and LTTI.
STT CONTROL PLUG, J1/J2/J3
ORDERING INFORMATION
PN: 1232632
Control Plug (Contains 3 Plug Set)
STT Control Plugs
STT Control Plug Case
STT CABLES AND ACCESSORIES
(AVAILABLE SEPERATELY)
ORDERING INFORMATION
Cables
PN: 1132441
STT Link 16 RF Cable Set
STT Audio/Fill Cable Set
STT Link 16 RF Cable Set
1 meter cables for antenna A and antenna B
terminating in SMA(m) connector, suitable for
interfacing to other connectors
PN: 1142080
STT Fan tray power cable (6 foot with banana plugs)
PN: 1134661
STT audio/fill cable
Kits
PN: 1142390
PN: 1124366
STT Fan Tray Assembly
STT Field Integration Kit Cables and signal breakout
boxes packaged in a single, portable case
STT Mating Connector Kit
Set of Mating Connectors for the STT: J1, J2, J3,
J4, J5, J6, J7, J10
Voice Control Units (VCUs)
PN: 1142642
2U STT Voice Control Unit (with microphone)
PN: 1142643
1U STT Voice Control Unit (with microphone)
PN: 1142644
2U STT Voice Control Unit (with headset)
PN: 1142645
1U STT Voice Control Unit (with headset)
Other Accessories
PN: 1117574
STT Fan Tray (includes power cable)
PN: 1099419
STT Fan Tray Filter
PN: 1118069
Falcon III Keypad Display Unit (KDU)
for controlling the STT UHF/VHF Channels
PN: 1044621
GPS with Network Time Server that provides 1 PPS
signal suitable for use as ETR to STT Terminals.
GPS Antenna and 100 ft cable included.
STT Field Integration Kit
Transport Cases
PN: 1202383
STT
PN: 1204022
STT with Fan Tray Assembly
CONTACT
U.S. SALES
TEL +1 760 476 4237
EMAIL STT@viasat.com
WEB www.viasat.com/STT
INTERNATIONAL SALES
TEL +1 760 476 2342
EMAIL STT.international@viasat.com
TEL +703 880 60611
WEB www.harris.com/stt
Copyright © 2014-2016 ViaSat, Inc. All rights reserved. ViaSat and the ViaSat logo are registered trademarks of ViaSat, Inc. FALCON and Harris are registered trademarks of Harris Corporation. All other trademarks mentioned
are the sole property of their respective companies. Specifications and product availability are subject to change without notice. This product is restricted to use by only the U.S. Military and approved international customers.
030-161128-029
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising