Vision blue3
The Vision blue Range
Combining perfect balance with precisely
adjustable drag to match your style.
Freeing your creativity
www.vinten.com
New
blueBridge
Introducing the new Vision blue Range...
The award winning Vision blue
head and tripod systems
deliver effortless support,
freeing you to focus on your
creative edge. With the widest
payload capacity in each class,
the perfect balance and drag
control can be adapted for
cameras from just 1.5kg
with the new blueBridge,
up to 12kg/26.5lb, for
heavier combinations.
Whichever system you choose, each pan
and tilt head is effortless to use, providing
perfect balance and precisely adjustable
drag to exactly match your style.
Based upon the technology used by
broadcasters around the globe, Vinten
Vision blue systems offer outstanding
quality of camera support. Each Vision
blue head is the only product in its class to
offer infinitely adjustable Perfect Balance
and Lubricated Friction (LF) drag
technology, freeing you to focus on getting
the best from your camera.
The Vision blue range:
Effortless camera operation – perfect
counterbalance adjustment
Moves in tune with you – infinite drag
settings
Built to last – precision engineered
parts, designs based upon broadcast
industry expertise
Adapts to many cameras - widest
payload capacity in each class.
Vision blue
from 1.5kg @55mm CofG
Vision blue3
from 2.1kg @55mm CofG
Vision blue5
up to 12kg (26.5lb) @100mm CofG
Freedom rewarded...
Freeing you to focus on the filming,
the award winning Vision blue head and
tripod systems deliver effortless support.
The sophisticated engineering that
delivers Vinten’s trademark perfect
balance and Lubricated Friction (LF)
drag is hidden within a tough metal
case, designed to last a life time.
The Vision blue3 is best described as a
"don't think, just shoot" tripod head. It feels
very natural to work with.”
Derran Rootring,
New Zealand,
reviewing
Vision blue3
Slideload system
for rapid camera
attachment
Perfect balance
for effortless
operation
Infinitely adjustable
LF drag to match
your style
The performance of the head is flawless. The usual
Vinten silky smooth pan and tilt starts and stops, superb
constant velocity movement in any axis and not a hint of
pullback at pan ends.
In short, as perfect as I can ever imagine any head being.
Chris Soucy,
reviewing the
Vision blue
Illuminated
levelling bubble
for precise
set-up
Silky smooth,
distraction free,
operation
Torsional
rigidity minimises
spring back
In tune with you...
Whichever system you choose,
you’ll value the perfect balance
and infinitely adjustable drag that
precisely matches your style:
Leg clamps
designed for extra
stiffness
Designed for the lightest weight
¼” camcorders and DSLRs, the
Vision blue delivers the consistent
drag and handling resistance that
you prefer.
The new Vision blue3 is ideal for
most ⅓” chip camcorders or highly
accessorised lightweight DSLRs.
With the Vision blue5, you’ll value the
effortless handling of payloads up to
12kg/26lbs, enough for most ⅔” chip
camcorders and accessories.
By teaming the Vision blue heads with
the Pozi-Loc tripod and Vinten carry case,
you’ll have the perfect support for your
business. The Pozi-Loc’s design excellence
is felt throughout, starting with the excellent
torsional rigidity which minimises the
spring back in your film. The smart design
and choice of materials ensure it will
perform, whatever the conditions.
Tight joint
clearances limit
free movement
Vision blue balance graph
Vision blue3 balance graph
6
150
140
140
Vision blue with bluebridge
130
100
Vision blue min
90
80
3
70
Vision blue max 900
60
50
Vision blue max 600
40
30
Vision blue max 400
1
20
mm
10
Kg
Lbs 1
1
2
2
3
4
Payload Mass
3
5
6
4
7
8
9
5
10
11
6
12
13
7
14
15
8
16
17
9
18
19
20
21
120
110
4
100
Vision blue3 min
90
80
3
70
Vision blue3 max 900
60
2
50
Vision blue3 max 600
40
30
Vision blue3 max 400
1
20
Inches
Centre of Gravity Height Above Platform
110
Inches
Centre of Gravity Height Above Platform
5
120
2
Vision blue3 with bluebridge
130
5
4
150
10
mm
6
10
Kg
22
Lbs 1
1
2
2
3
4
Payload Mass
3
5
6
4
7
8
9
5
10
11
6
12
13
7
14
15
8
16
17
9
18
19
20
10
21
22
Bridging the gap...
The new Vision bluebridge
accessory extends the lower
range of payloads for each Vision
blue system. Quickly and simply
attaching to the underside of the
camera, it raises the camera
above the platform allowing lower
weight cameras
to be used that
would otherwise
be too light for
the counterbalance
system to balance perfectly.
Why Drag is important
To help you achieve the best possible
filming, Vinten’s Lubricated Friction
(LF) drag technology (resistance to
movement) helps prevent overshooting,
dampens out unwanted movements and
makes minor adjustment virtually
impossible to detect.
Vinten’s LF drag provides a higher level of
resistance at the start of any movement
when the most pressure is exerted.
Vinten’s infinite, rather than stepped
adjustment, enables you to select exactly
the level of drag to precisely match the
way you work.
LF drag characteristics
25
20
1
“A large knob on the back of the head adds or
subtracts spring tension so that (theoretically)
a camera can be held in place at any angle of tilt.
If you take the time to dial it in, it really works,
even with a camera that is within ten percent of
the head's maximal load limit.”
Drag Torque (resistance)
10
5
0
0.2
0.4
0.6
Angular velocity (pan speed)
Bruce A Johnson,
USA, reviewing the
Vision blue5
Vision blue5 balance graph
6
Vision blue5 with bluebridge
130
120
110
100
Vision blue5 min
90
80
3
70
Vision blue5 max 900
60
2
50
Vision blue5 max 600
40
30
Vision blue5 max 400
1
Inches
20
10
mm
Centre of Gravity Height Above Platform
5
4
Kg
Lbs 2
2
4
4
6
8
Payload Mass
6
10
12
8
14
16
18
10
20
22
0.8
1
1.2
1
Vinten drag
2
Competitor's drag
Every Vinten is backed
by our service centres across
the world. Register, free,
for an extended warranty
at www.vinten.com/servicingwarranty
150
140
2
15
12
24
26
14
28
30
16
32
34
36
18
38
40
20
42
44
Product specifications & packages
Specification:
Capacity Range
Capacity Range
with Vision blueBridge
Vision blue
Vision blue3
Vision blue5
2.1 to 5.0 kg / 4.6 to 11.0 lbs
@ approx. 55 mm CofG
3.0 – 6.6kg / 6.6-14.6lbs
@ approx. 55mm CofG
5.5-12kg / 12-26lbs
@ approx. 100mm CofG
1.5 – 5.0kg / 3.3-11.0lbs
@ approx. 55mm CofG
2.1 – 6.6kg / 4.6-14.6lbs
@ approx. 55mm CofG
4.2-12kg/ 9.2-26lbs
@ approx. 100mm CofG
System height with
Pozi-Loc tripod (floor spreader)
55-169cm (22-66")
g
System transport length (floor spreader)
85cm (33.5")
g
Tilt range
±90°
Counter balance
Infinitely adjustable Perfect Balance
Drag
Calibrated infinitely adjustable LF drag system
Ball base
75mm
g
Camera fixing
Standard Vision AS two-way sliding plate with one ¼” camera screw and pin
Levelling bubble
Illuminated high contrast blue LED
Pan Bar
Single fixed length
Temperature range
-15 to +30⁰C
y
Floor spreader system weight
with optional Vision blueBridge
6.9kg/15.2lbs incl. pan bar, camera plate, bowl clamp and Vision blueBridge
Mid level spreader system weight
with optional Vision blueBridge
6.5kg/14.3lbs incl.pan bar, camera plate, bowl clamp and Vision blueBridge
Your Purchase Options
Package Options:
Head only
V4092-0001
Stand alone Vision blue head
V4106-0001
Stand alone Vision blue3 head
V4105-0001
Stand alone Vision blue5 head
End entry camera plate supplied with ¼” screw and pin assembly, additional ¼” screw and 2 x ⅜” camera screws,
fixed length pan bar, bowl clamp knob and multi-language operator guide.
System with floor spreader
VB-AP2F
• 1 x Vision blue head
(V4092-0001)
VB3-AP2F
• 1 x Vision blue3 head
(V4106-0001)
VB5-AP2F
• 1 x Vision blue5 head
(V4105-0001)
• 1 x Two stage aluminium Pozi-Loc tripod (3819-3) • 1 x Floor Spreader (3363-3) • 1 x Soft Case (3358-3)
System with Mid level spreader
VB-AP2M
• 1 x Vision blue head
(V4092-0001)
VB3-AP2M
• 1 x Vision blue3 head
(V4106-0001)
VB5-AP2M
• 1 x Vision blue5 head
(V4105-0001)
• 1 x Two stage aluminium Pozi-Loc tripod (3819-3) • 1 x LW Mid-Level Spreader (V4032-0001) • 1 x Soft Case (3358-3)
Vision blueBridge camera adapter
V4106-1003
• 1 x Small camera adapter (V4106-2004) • 1 x ¼” screw and pin assy (V4045-1006) • 1A/R Oring (Q001-093)
Changes in Product Specification
Vinten reserve the right to alter specifications
or change materials where absolutely necessary.
All sizes shown throughout this brochure are
approximate and colours shown are as accurate
as modern reproduction methods will allow.
No liability can be accepted for any variation.
©2013 The Vitec Group plc
®Vinten, Vision, Vector, Quickfix & Quickfit
are registered trademarks of The Vitec Group plc.
Quality Systems Approved to ISO 9001:2000
Certificate No: Q09508
www.vinten.com
V1-2013/2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising