Intel | SSDSA2MH160G2C1 | Datasheet | Intel X25-M SATA II, 160GB

Intel X25-M SATA II, 160GB
Intel® X18-M/X25-M SATA Solid State Drive
SSDSA1MH080G1, SSDSA2MH080G1, SSDSA1MH160G1, SSDSA2MH160G1
Product Manual
„
„
„
„
„
„
„
„
Available in 1.8” and 2.5” Form Factors
Capacity: 80 GB and 160 GB
Uses Intel NAND flash memory Multi-Level Cell
(MLC) components
Bandwidth Performance Specifications
— Sustained Sequential Read: Up to 250 MB/s
— Sustained Sequential Write: Up to 70 MB/s
Read and Write IOPS specifications (IOmeter
Queue Depth 32)
— Random 4 KB Reads: Up to 35 K IOPS
— Random 4 KB Writes: Up to 3.3 K IOPS
PCMark* Vantage Benchmark HDD Score:
20,000
Compatibility
— Intel® Matrix Storage Manager
— SATA Revision 2.6 compliant, compatible
with SATA 1.5 Gb/s and 3 Gb/s interface
rates
— ATA/ATAPI-7 Compliant
— SSD Enhanced SMART ATA feature set
— Native Command Queuing (NCQ) command
set
Certifications
— UL*
— CE*
— C-Tick*
— BSMI*
— MIC*
— Microsoft* WHQL
— RoHS*
„
„
„
„
„
„
„
Power Management
— 3.3 V (1.8”) or 5 V (2.5”) SATA Supply Rail
— SATA Interface Power Management
— OS-Aware Hot Plug/Removal
Power Specifications
— Active: 0.150 W TYP
— Idle: 0.060 W TYP
Temperature
— Operating: 0o C to 70o C
— Non-Operating: -55o C to 95o C
Reliability
— Read Error Rate (BER): 1 sector per 1015
bits read
— Mean Time Between Failures (MTBF)
1,200,000 hours
— Endurance Management Feature enables
five years minimal useful life
Shock
— Operating and Non-operating: 1,000 G/0.5
msec
Vibration
— Operating: 2.17 G (7-800 Hz)
— Non-operating 3.13 G (10-500 Hz)
Weight
— 1.8” 5 mm Form Factor: 35 +/-2 grams
— 1.8” 8 mm Form Factor: 47 +/-2 grams
— 2.5” 7 mm Form Factor: 80 +/-2 grams
— 2.5” 9.5 mm Form Factor: 86 +/-2 grams
Order Number: 319765-005US
January 2009
Ordering Information
L
Decoder
Intel High Performance Solid State Drive Ordering Information
Part Number
SSDSA1MH080G1
SSDSA2MH080G1
SSDSA1MH160G1
SSDSA2MH160G1
MM
Numbers
Order
Quantity
Device Nomenclature
894401
80 GB SATA 1.8” 5 mm Drive, MLC, Production Sample
1
901461
80 GB SATA 1.8” 5 mm Drive, MLC, Production Sample
5
894400
80 GB SATA 1.8” 5 mm Drive, MLC, Production Sample
50
894103
80 GB SATA 2.5” 7 mm Drive, MLC, Production Sample
1
901460
80 GB SATA 2.5” 7 mm Drive, MLC, Production Sample
5
894125
80 GB SATA 2.5” 7 mm Drive, MLC, Production Sample
50
899854
80 GB SATA 2.5” 9.5 mm Drive, MLC, Production Sample
1
899855
80 GB SATA 2.5” 9.5 mm Drive, MLC, Production Sample
5
901776
80 GB SATA 2.5” 9.5 mm Drive, MLC, Production Sample
50
898094
160 GB SATA 1.8” 8 mm Drive, MLC, Qualification Sample
1
900292
160 GB SATA 2.5” 7 mm Drive, MLC, Qualification Sample
1
900291
160 GB SATA 2.5” 9.5 mm Drive, MLC, Qualification Sample
1
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS
OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING
TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for
use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the
presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel
or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means without the express written consent of Intel Corporation.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents
which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-4725 or by visiting
Intel's website at http://www.intel.com.
Intel and Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2009, Intel Corporation. All Rights Reserved.
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
2
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
Contents
1.0
Introduction .............................................................................................................. 5
1.1
Product Overview ................................................................................................ 5
1.2
Block Diagram .................................................................................................... 6
1.3
Architecture........................................................................................................ 6
2.0
Certifications ............................................................................................................. 6
3.0
Product Specifications ............................................................................................... 7
3.1
Capacity ............................................................................................................ 7
3.2
Performance ....................................................................................................... 7
3.3
Electrical Characteristics....................................................................................... 8
3.3.1 Supply Voltage......................................................................................... 8
3.3.2 Power Consumption .................................................................................. 8
3.4
Environmental Conditions ..................................................................................... 9
3.4.1 Temperature............................................................................................ 9
3.4.2 Altitude................................................................................................... 9
3.4.3 Shock and Vibration.................................................................................. 9
3.4.4 Acoustics ................................................................................................ 9
3.4.5 Electromagnetic Immunity....................................................................... 10
3.5
Reliability ......................................................................................................... 10
3.5.1 Nonrecoverable Read Errors..................................................................... 11
3.5.2 Mean Time Between Failure ..................................................................... 11
3.5.3 Power On/Off Cycles ............................................................................... 11
3.5.4 Minimum Useful Life ............................................................................... 11
4.0
Mechanical Information ........................................................................................... 11
4.1
1.8” 5 mm Intel X18-M SATA SSD ....................................................................... 11
4.2
1.8” 8 mm Intel X18-M SATA SSD ....................................................................... 13
4.3
2.5” 7 mm Intel X25-M SATA SSD ....................................................................... 14
4.4
2.5” 9.5 mm Intel X25-M SATA SSD .................................................................... 15
5.0
Pin and Signal Descriptions ..................................................................................... 16
5.1
Pin Locations .................................................................................................... 16
5.1.1 1.8” Pin Locations................................................................................... 16
5.1.2 2.5” Pin Locations................................................................................... 17
5.2
Signal Description Table ..................................................................................... 17
5.3
Hot Plug Support............................................................................................... 19
6.0
Command Sets ........................................................................................................ 19
6.1
ATA Commands ................................................................................................ 19
6.1.1 ATA General Feature Command Set .......................................................... 19
6.1.2 Power Management Command Set............................................................ 22
6.1.3 Security Mode Feature Set....................................................................... 23
6.1.4 SMART Command Set ............................................................................. 23
6.1.5 Host Protected Area Command Set ........................................................... 23
6.1.6 48-Bit Address Command Set .................................................................. 24
6.1.7 Device Configuration Overlay Command Set .............................................. 24
6.1.8 General Purpose Log Command Set .......................................................... 24
6.2
SATA Commands............................................................................................... 24
6.2.1 Software Settings Preservation................................................................. 24
6.2.2 Native Command Queuing ....................................................................... 25
7.0
References .............................................................................................................. 25
8.0
Terms and Acronyms ............................................................................................... 26
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
3
Intel® X18-M/X25-M SATA SSD
9.0
Revision History.......................................................................................................27
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
4
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
1.0
Introduction
The Intel® X18-M/X25-M SATA Solid State Drive (SSD) delivers leading performance in
industry standard 1.8” and 2.5” form factors while simultaneously improving system
responsiveness for mobile applications over standard rotating drive media or hard disk
drives. By combining Intel’s leading NAND flash memory technology with our innovative
high performance controller, Intel delivers an SSD for Native Serial Advanced
Technology Attachment (SATA) hard disk drive drop-in replacement with enhanced
performance, reliability, ruggedness and power savings.
Since there are no rotating platters, moving heads, fragile actuaters, or unnecessary
delays due to spin-up time or positional seek time that can slow down the storage
subsystem significantly, the Intel X18-M/X25-M SATA SSD enables fast read/write
access times and a significant I/O and throughput performance improvement as
compared to rotating media or hard disk drives.
This document describes the specifications of the Intel X18-M/X25-M SATA SSD in the
1.8” and 2.5” form factors.
1.1
Product Overview
The Intel X18-M/X25-M SATA SSDs primarily target SATA based laptop PCs, highly
rugged mobile client devices, as well as thin and light, mini/sub-notebooks. Key
attributes include high performance, low power, increased system responsiveness, high
reliability and enhanced ruggedness as compared to standard mobile SATA hard drives.
Intel X18-M/X25-M SATA SSDs are available in 1.8” and 2.5” form factors that are
electrically, mechanically, and software compatible with existing 1.8” and 2.5” Serial
ATA slots and cables. Our flexible design allows interchangeability with existing mobile
hard drives based on the SATA interface standard.
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
5
Intel® X18-M/X25-M SATA SSD
1.2
Block Diagram
Figure 1.
Block Diagram
NAND
Flash
Memory
Flash Memory
Channel 0
SATA Interface
Intel
System
On A Chip
(SOC)
Flash Memory
Channel ...
NAND
Flash
Memory
NAND
Flash
Memory
Flash Memory
Channel n
1.3
Architecture
The Intel X18-M/X25-M SATA SSDs utilize a cost effective System on a Chip (SOC)
design to manage a full SATA 3 Gb/s bandwidth with the host while managing multiple
flash memory devices on multiple channels internally.
2.0
Certifications
Table 1.
Device Certifications
Certification
CE Compliant
Description
Indicates conformity with the essential health and safety requirements set out in European
Directives Low Voltage Directive and EMC Directive.
UL Certified
Underwriters Laboratories, Inc. Component Recognition UL60950-1.
C-Tick Compliant
Compliance with the Australia/New Zealand Standard AS/NZS3548 and Electromagnetic
Compatibility (EMC) Framework requirements of the Australian Communication Authority
(ACA).
BSMI Compliant
Compliance to the Taiwan EMC standard “Limits and methods of measurement of radio
disturbance characteristics of information technology equipment, CNS 13438 Class B.”
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
6
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
Table 1.
Device Certifications (Continued)
Certification
Description
MIC Certified
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility control
Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of
the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic
of Korea.
Microsoft WHQL
Microsoft Windows Hardware Quality Labs
RoHS Compliant
Restriction of Hazardous Substance Directive
3.0
Product Specifications
3.1
Capacity
Table 2.
User Addressable Sectors
Unformatted Capacity
Total User Addressable Sectors in LBA Mode
80 GB
156,301,488
160 GB
312,581,808
Notes:
1.
1 GB = 1,000,000,000 Byte and not all of the memory can be used for data storage.
2.
1 Sector = 512 Byte.
3.2
Performance
Table 3.
Maximum Sustained Read and Write Bandwidth
Access Type
MB/s
Sequential Read
Up to 250
Sequential Write
Up to 70
Note:
Performance measured using IOmeter with queue depth set to 32.
Table 4.
PCMark* Vantage Benchmark
Benchmark
PCMark Vantage HDD Score
Note:
Score
20,000
Performance tests and ratings are measured using HP* Compaq* 6910p notebook with Intel Core™2 Duo CPU T7300 @
2.0 GHz processor and 2 GB DRAM running Microsoft* Windows Vista* Enterprise Edition and reflects the approximate
performance as measured by that configuration. Any difference in system hardware or software design or configuration
may affect actual performance.
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
7
Intel® X18-M/X25-M SATA SSD
Table 5.
Latency Specifications
Type
Average Latency
Read
85 µs (TYP)
Write
115 µs (TYP)
Power On to Ready
Notes:
1.
2.
3.
4.
1s
Write Cache Enabled.
Device measured using IOmeter.
Power On To Ready time assumes proper shutdown (power removal preceded by STANDBY command).
Read/Write latency measured on 4 K transfers.
Table 6.
Random Read/Write Input/Output Operations Per Second
Access Type
IOPS
4K Read
35,000
4K Write
3,300
Notes:
1.
Performance measured using IOmeter with queue depth set to 32.
2.
Write Cache enabled.
3.
Measurements are performed on 8 GB span.
3.3
Electrical Characteristics
3.3.1
Supply Voltage
Table 7.
Operating Voltage
Description
Min
Max
Unit
Operating Voltage for 3.3 V (+/- 5%)
3.14
3.47
V
Operating Voltage for 5 V (+/- 5%)
4.75
5.25
V
3.3.2
Power Consumption
Table 8.
Typical Power Consumption
Mode
Typ
Unit
Active
0.150
W
Idle
0.060
W
Active power is measured during execution of MobileMark* 2007 with DIPM (Device
Initiated Power Management) enabled.
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
8
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
3.4
Environmental Conditions
3.4.1
Temperature
Table 9.
Temperature Related Specifications
Mode
Ambient Temperature
Temperature Gradient
Humidity
Note:
Min
Operating
Non-Operating
Typ
Max
Unit
0
70
o
C
-55
95
o
C
Operating
20
oC/hr
Non-Operating
30
o
*
C/hr *
Operating
5
95
%
Non-Operating
5
95
%
Measured without condensation.
3.4.2
Altitude
The drive is not sensitive to changes in altitude because it has no moving parts. Drive
tested within -1K and +40K feet.
3.4.3
Shock and Vibration
Table 10.
Shock and Vibration Specifications
Mode
Shock1
Vibration2
Timing
Max
Unit
Operating
at 0.5 msec
1,000
G
Non-Operating
at 0.5 msec
1,000
G
Operating
2.17 G
7-800 Hz
Non-Operating
3.13 G
10-500 Hz3
Notes:
1.
Shock specifications assumes that the SSD is mounted securely with the input vibration applied to the drive mounting
screws. Stimulus may be applied in the X, Y or Z axis.
2.
Vibration specifications assumes that the SSD is mounted securely with the input vibration applied to the drive mounting
screws. Stimulus may be applied in the X, Y or Z axis.
3.
Sine wave sweeping 1 oct/min.
3.4.4
Acoustics
The SSD has no moving or noise-emitting parts; therefore, it produces negligible sound
(0 dB) in all modes of operation.
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
9
Intel® X18-M/X25-M SATA SSD
3.4.5
Electromagnetic Immunity
Electromagnetic Immunity tests assume the SSD is properly installed in the
representative host system. The drive will operate properly without errors or
degradation in performance when subjected to radio frequency (RF) environments
defined in the following table:
Table 11.
Radio Frequency Specifications
Test
Performance
Criteria
Description
Reference Standard
Electrostatic discharge
Contact, HCP, VCP: ±8kV; Air: ± 15 kV
B
EN 61000-4-2: 95
Radiated RF immunity
80 to 1,000 MHz, 3 V/m,
80% AM with 1 kHz sine
900 MHz, 3 V/m, 50% pulse modulation at
200 Hz
A
EN 61000-4-3: 96
ENV 50204: 95
Electrical fast transient
± 1 kV on AC mains, ± 0.5 kV on external
I/O
B
EN 61000-4-4: 95
Surge immunity
± 1 kV differential, ± 2 kV common, AC
mains
B
EN 61000-4-5: 95
Conducted RF immunity
150 kHz to 80 MHz, 3 Vrms, 80% AM with 1
kHz sine
A
EN 61000-4-6: 97
Voltage dips, interrupts
0% open, 5 seconds
0% short, 5 seconds
40%, 0.10 seconds
70%, 0.01 seconds
C
C
C
B
EN 61000-4-11: 94
Notes:
1.
Performance Criteria A = The device shall continue to operate as intended, i.e., normal unit operation with no
degradation of performance.
2.
Performance Criteria B = The device shall continue to operate as intended after completion of the test. However, during
the test, some degradation of performance is allowed as long as there is no data loss operator intervention to restore
device function.
3.
Performance Criteria C = temporary loss of function is allowed. Operator intervention is acceptable to restore device
function.
4.
Contact electostatic discharge applied to drive enclosure.
3.5
Reliability
Table 12.
Reliability Specifications
Parameter
Nonrecoverable read errors
Value
1 sector in 1015 bits read, max
Mean Time between Failure (MTBF)
1,200,000 hours
Power On/Off Cycles
50,000 cycles
Minimum Useful Life
5 years
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
10
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
3.5.1
Nonrecoverable Read Errors
The nonrecoverable read error rate will not exceed one sector in the specified number
of bits read. In the extremely unlikely event of a nonrecoverable read error, the drive
will report it as a read failure to the host; the sector in error is considered corrupt and
is not returned to the host.
3.5.2
Mean Time Between Failure
The Mean Time Between Failure (MTBF) is calculated based on a Part Stress Analysis. It
assumes nominal voltage, with all other parameters within specified range.
3.5.3
Power On/Off Cycles
Defined as power being removed from the drive, and then restored. Most host systems
remove power from the drive when entering suspend and hibernate as well as on a
system shutdown.
3.5.4
Minimum Useful Life
A typical client usage of 20 GB writes per day is assumed. Should the host system
attempt to exceed 20 GB writes per day by a large margin for an extended period, the
drive will enable the endurance management feature to adjust write performance. By
efficiently managing performance, this feature enables the device to have, at a
minimum, a five year useful life. Under normal operation conditions, the drive will not
invoke this feature.
4.0
Mechanical Information
4.1
1.8” 5 mm Intel X18-M SATA SSD
The following figure shows the physical package information for the 5 mm deep 1.8”
Intel X18-M SATA SSD.
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
11
Intel® X18-M/X25-M SATA SSD
Figure 2.
Dimensions for Intel X18-M SATA SSD 1.8” 5 mm Form Factor
Notes:
1.
Connector Outline: The 1.8” Intel X18-M SATA SSD connector is compliant to the SATA Rev 2.6 specifications.
2.
Connector Location: The 1.8” Intel X18-M SATA SSD connector is compliant to the micro SATA SFF-8144 specification.
3.
All dimensions are in millimeters.
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
12
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
4.2
1.8” 8 mm Intel X18-M SATA SSD
The following figure shows the physical package information for the 8 mm deep 1.8”
Intel X18-M SATA SSD.
Figure 3.
Note:
Dimensions for Intel X18-M SATA SSD 1.8” 8 mm Form Factor
All dimensions are in millimeters.
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
13
Intel® X18-M/X25-M SATA SSD
4.3
2.5” 7 mm Intel X25-M SATA SSD
The following figure shows the physical package information for the 7 mm deep 2.5”
Intel X25-M SATA SSD.
Figure 4.
Note:
Dimensions for Intel X25-M SATA SSD 2.5” 7 mm Form Factor
All dimensions are in millimeters.
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
14
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
4.4
2.5” 9.5 mm Intel X25-M SATA SSD
The following figure shows the physical package information for the 9.5 mm deep 2.5”
Intel X25-M SATA SSD.
Figure 5.
Note:
Dimensions for Intel X25-M SATA SSD 2.5” 9.5 mm Form Factor
All dimensions are in millimeters.
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
15
Intel® X18-M/X25-M SATA SSD
5.0
Pin and Signal Descriptions
This section identifies the pin locations and signal descriptions of the Intel X18-M/
X25-M SATA SSDs.
5.1
Pin Locations
5.1.1
1.8” Pin Locations
Figure 6.
Layout of Signal and Power Segment Pins
Signal Segment S1
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
16
Power Segment P1
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
5.1.2
2.5” Pin Locations
Figure 7.
Layout of Signal and Power Segment Pins
Signal Segment S1
Power Segment P1
5.2
Signal Description Table
Table 13.
Serial ATA Connector Pin Signal Definitions for 1.8” and 2.5” Form Factors
Note:
Pin
Function
S1
Ground
S2
A+
S3
A-
S4
Ground
S5
B-
S6
B+
S7
Ground
Definition
2nd mate
Differential signal pair A
2nd mate
Differential signal pair B
2nd mate
Key and spacing separate signal and power segments.
Table 14.
Serial ATA Power Pin Definitions for 1.8” Form Factor
Pin
Function
Definition
Mating Order1
P1
V33
3.3 V Power2
2nd Mate
P2
V33
3.3 V Power, pre-charge2
1st Mate
3
P3
Ground
P4
Ground3
P5
V5
January 2009
Order Number: 319765-005US
1st Mate
1st Mate
5 V Power. Not
connected4
1st Mate
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
17
Intel® X18-M/X25-M SATA SSD
Table 14.
Serial ATA Power Pin Definitions for 1.8” Form Factor (Continued)
Pin
Function
Definition
Mating Order1
P6
V5
5 V Power. Not connected4
2nd Mate
P7
DAS
Device Activity Signal5
2nd Mate
Key
Key
NC
P8
Optional
Manufacturing Test Pin6
2nd Mate
NC
P9
Optional
Manufacturing Test Pin6
2nd Mate
Notes:
1.
All mate sequences assume zero angular offset between connectors.
2.
P1 and P2 are internally connected to one another within the device.
3.
Ground connectors P3 and P4 may contact before the other 1st mate pins in both the power and signal connectors to
discharge ESD in a suitably configure backplane connector.
4.
P5 and P6 are not connected internal to the device. The host may put 5V on these pins.
5.
The host may ground P7 if it is not used for Device Activity Signal (DAS).
6.
P8 and P9 should not be connected by the host.
Table 15.
Serial ATA Power Pin Definitions for 2.5” Form Factor
Pin1
Function
Definition
Mating Order
P1
Not connected2
(3.3 V Power)
P2
Not connected
2
(3.3 V Power)
P3
Not connected2
P4
Ground3, 4
1st Mate
P5
Ground3
1st Mate
P6
Ground
3
P7
V53, 5
5 V Power
1st Mate
P8
V53, 5
5 V Power
2nd Mate
P9
V53, 5
5 V Power
2nd Mate
Device Activity Signal6
2nd Mate
(3.3 V Power. pre-charge)
2nd Mate
1st Mate
P10
Ground3
P11
DAS6
P12
Ground3, 4
P13
V127
12 V Power. Not used.
2nd Mate
P14
V127
12 V Power. Not used.
2nd Mate
P15
V127
12 V Power. Not used.
2nd Mate
1st Mate
1st Mate
Notes:
1.
All pins are in a single row, with a 1.27 mm (0.050”) pitch.
2.
Pins P1, P2 and P3 are connected together, although they are not connected internally to the device. The host may put
3.3 V on these pins.
3.
The mating sequence are:
•
the ground pins P4-P6, P10, P12 and the 5v power pin P7.
•
the signal pins and the rest of the 5V power pins P8-P9.
4.
Ground connectors P4 and P12 may contact before the other 1st mate pins in both the power and signal connectors to
discharge ESD in a suitably configured backplane connector.
5.
Power pins P7, P8,and P9 are internally connected to one another within the device.
6.
The host may ground P11 if it is not used for Device Activity Signal (DAS).
7.
Pins P13, P14 and P15 are connected together, although they are not connected internally to the device. The host may put
12 V on these pins.
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
18
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
5.3
Hot Plug Support
Hot Plug insertion and removal are supported in the presence of a proper connector
and appropriate operating system (OS) support as described in the SATA 2.6
specification. This product supports Asynchronous Signal Recovery and will issue an
unsolicited COMINIT when first mated with a powered connector to guarantee reliable
detection by a host system without hardware device detection.
6.0
Command Sets
6.1
ATA Commands
The Intel X18-M/X25-M SATA SSDs support all the mandatory ATA commands defined
in the ATA/ATAPI-7 specification.
6.1.1
ATA General Feature Command Set
The Intel X18-M/X25-M SATA SSDs support the ATA General Feature command set
(non-PACKET), which consists of
• EXECUTE DEVICE DIAGNOSTIC
• FLUSH CACHE
• IDENTIFY DEVICE
• READ DMA
• READ SECTOR(S)
• READ VERIFY SECTOR(S)
• SEEK
• SET FEATURES
• WRITE DMA
• WRITE SECTOR(S)
• READ MULTIPLE
• SET MULTIPLE MODE
• WRITE MULTIPLE
The Intel X18-M/X25-M SATA SSDs also support the following optional commands:
• READ BUFFFER
• WRITE BUFFER
• NOP
• DOWNLOAD MICROCODE
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
19
Intel® X18-M/X25-M SATA SSD
6.1.1.1
IDENTIFY DEVICE Data
The following table details the sector data returned after issuing an IDENTIFY DEVICE
command.
Table 16.
Word
Returned Sector Data
F = Fixed
V = Variable
X = Both
Default Value
Description
0
F
0040h
General configuration bit-significant information
1
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
2
V
C837h
Specific configuration
3
X
0010h
Obsolete - Number of logical heads (16)
4-5
X
0h
6
X
003Fh
Retired
Obsolete - Number of logical sectors per logical track (63)
7-8
V
0h
Reserved for assignment by the CompactFlash Association
9
X
0h
Retired
10-19
F
Varies
20-21
X
0h
Retired
Obsolete
Serial number (20 ASCII characters)
22
X
0h
23-26
F
Varies
27-46
F
Varies
Model number (Intel Solid State Drive)
8010h
7:0—Maximum number of sectors transferred per interrupt on MULTIPLE
commands
Firmware revision (8 ASCII characters)
47
F
48
F
0h
49
F
2F00h
50
F
4000h
51-52
X
0h
53
F
0007h
Words 88 and 70:64 Valid
54
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
55
X
0010h
Obsolete - Number of logical heads (16)
56
X
003Fh
Obsolete - Number of logical sectors per logical track (63)
57-58
X
00FBFC10h
59
F
0101h
Reserved
Capabilities
Capabilities
Obsolete
Obsolete
Number of sectors transferred per interrupt on MULTIPLE commands
0950F8B0h
(80 GB)
60-61
F
Total number of user addressable sectors
0FFFFFFFh
(160 GB)
62
X
0h
63
F
0007h
Multi-word DMA modes supported/selected
64
F
0003h
PIO modes supported
65
F
0078h
Minimum Multiword DMA transfer cycle time per word
66
F
0078h
Manufacturer’s recommended Multiword DMA transfer cycle time
67
F
0078h
Minimum PIO transfer cycle time without flow control
68
F
0078h
Minimum PIO transfer cycle time with IORDY flow control
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
20
Obsolete
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
Table 16.
Word
Returned Sector Data (Continued)
F = Fixed
V = Variable
X = Both
Default Value
Description
69-70
F
0h
Reserved (for future command overlap and queuing)
71-74
F
0h
Reserved for the IDENTIFY PACKET DEVICE command.
75
F
001Eh
Queue depth
76
F
0106h
Serial ATA capabilities
77
F
0h
78
F
0048h
Serial ATA features supported
79
V
0040h
Serial ATA features enabled
80
F
00FCh
Major Version Number
81
F
001Ah
Minor Version Number
82
F
746Bh
Command set supported.
83
F
7C01h
Command sets supported.
84
F
6123h
Command set/feature supported extension.
85
V
7469h
Command set/feature enabled.
86
V
BC01h
Command set/feature enabled.
87
V
6123h
Command set/feature default.
88
V
407Fh
Ultra DMA Modes
89
F
0001h
Time required for security erase unit completion
90
F
0001h
Time required for Enhanced security erase completion
Reserved for future Serial ATA definition
91
V
0h
92
V
FFFEh
Current advanced power management value
93
F
0h
Hardware reset result. The contents of bits (12:0) of this word shall change
only during the execution of a hardware reset.
94
V
0h
Vendor’s recommended and actual acoustic management value.
95
F
0h
Stream Minimum Request Size
96
V
0h
Streaming Transfer Time - DMA
97
V
0h
Streaming Access Latency - DMA and PIO
98-99
F
0h
Streaming Performance Granularity
Master Password Revision Code
0950F8B0h
(80 GB)
100-103
V
Maximum user LBA for 48-bit Address feature set.
12A19EB0h
(160 GB)
104
V
0h
Streaming Transfer Time - PIO
105
106
F
0h
Reserved
F
4000h
107
F
0h
108-111
F
Varies
Physical sector size / logical sector size
Inter-seek delay for ISO-7779 acoustic testing in microseconds
Unique ID
112-115
F
0h
Reserved for world wide name extension to 128 bits
116
V
0h
Reserved for technical report-
117-118
F
0h
119
F
401Ch
January 2009
Order Number: 319765-005US
Words per Logical Sector
Supported Settings
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
21
Intel® X18-M/X25-M SATA SSD
Table 16.
Word
Returned Sector Data (Continued)
F = Fixed
V = Variable
X = Both
Default Value
Description
120
F
401Ch
121-126
F
0h
Command Set/Feature Enabled/Supported
Reserved
Removable Media Status Notification feature set support
127
F
0h
128
V
0021h
129-159
X
0h
Vendor specific
160
F
0h
CompactFlash Association (CFA) power mode 1
Security status
161-175
X
0h
Reserved for assignment by the CFA
176-205
V
0h
Current media serial number
Reserved
206-216
F
0h
217
F
0001h
Non-rotating media device
218-221
F
0h
Reserved
222
F
101F
Reserved
223-233
F
234
235
0h
Reserved
0001h
Reserved
02A0h
Reserved
236-254
F
0h
Reserved
255
X
Varies
Integrity word (Checksum and Signature)
Notes:
1.
F = Fixed. The content of the word is fixed and does not change. For removable media devices, these values may change
when media is removed or changed.
2.
V = Variable. The state of at least one bit in a word is variable and may change depending on the state of the device or
the commands executed by the device.
3.
X = F or V. The content of the word may be fixed or variable.
6.1.2
Power Management Command Set
The Intel X18-M/X25-M SATA SSD supports the Power Management command set,
which consists of
• CHECK POWER MODE
• IDLE
• IDLE IMMEDIATE
• SLEEP
• STANDBY
• STANDBY IMMEDIATE
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
22
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
6.1.3
Security Mode Feature Set
The Intel X18-M/X25-M SATA SSD supports the Security Mode command set, which
consists of
• SECURITY SET PASSWORD
• SECURITY UNLOCK
• SECURITY ERASE PREPARE
• SECURITY ERASE UNIT
• SECURITY FREEZE LOCK
• SECURITY DISABLE PASSWORD
6.1.4
SMART Command Set
The Intel X18-M/X25-M SATA SSDs support the SMART command set, please refer to
Intel® High Performance Solid State Drive S.M.A.R.T Features User Guide - Order
Number 320520-002US.
6.1.5
Host Protected Area Command Set
The Intel X18-M/X25-M SATA SSDs support the Host Protected Area command set,
which consists of
• READ NATIVE MAX ADDRESS
• SET MAX ADDRESS
• READ NATIVE MAX ADDRESS EXT
• SET MAX ADDRESS EXT
The Intel X18-M/X25-M SATA SSDs also support the following optional commands:
• SET MAX SET PASSWORD
• SET MAX LOCK
• SET MAX FREEZE LOCK
• SET MAX UNLOCK
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
23
Intel® X18-M/X25-M SATA SSD
6.1.6
48-Bit Address Command Set
The Intel X18-M/X25-M SATA SSDs support the 48-bit Address command set, which
consists of
• FLUSH CACHE EXT
• READ DMA EXT
• READ NATIVE MAX ADDRESS EXT
• READ SECTOR(S) EXT
• READ VERIFY SECTOR(S) EXT
• SET MAX ADDRESS EXT
• WRITE DMA EXT
• WRITE MULTIPLE EXT
• WRITE SECTOR(S) EXT
6.1.7
Device Configuration Overlay Command Set
The Intel X18-M/X25-M SATA SSDs support the Device Configuration Overlay command
set, which consists of
• DEVICE CONFIGURATION FREEZE LOCK
• DEVICE CONFIGURATION IDENTITY
• DEVICE CONFIGURATION RESTORE
• DEVICE CONFIGURATION SET
6.1.8
General Purpose Log Command Set
The Intel X18-M/X25-M SATA SSDs support the General Purpose Log command set,
which consists of
• READ LOG EXT
• WRITE LOG EXT
6.2
SATA Commands
The SATA 2.6 specification is a super set of the ATA/ATAPI-7 specification with regard to
supported commands. The Intel X18-M/X25-M SATA SSDs support the following
features that are unique to the SATA specification.
6.2.1
Software Settings Preservation
The Intel X18-M/X25-M SATA SSDs support the SET FEATURES parameter to enable/
disable the preservation of software settings.
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
24
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
6.2.2
Native Command Queuing
The Intel X18-M/X25-M SATA SSDs support the Native Command Queuing (NCQ)
command set, which consists of
• READ FPDMA QUEUED
• WRITE FPDMA QUEUED
Note:
7.0
With a maximum queue depth equal to 31.
References
This document references standards defined by a variety of organizations. Use the
following list to identify the location of an organization’s standards information.
Table 17.
Standards References
Date or
Rev. #
Dec 2008
Title
Location
VCCI
http://www.vcci.or.jp/vcci_e/general/join/index.html
RoHS
Search for material description datasheet at http://
intel.pcnalert.com
July 2007
SFF-8144, 1.8” drive form factor
http://www.sffcommittee.org
June 2007
Intel Matrix Storage Manager
http://support.intel.com/support/chipsets/imsm/
February 2007
Serial ATA Revision 2.6
http://www.sata-io.org
May 2006
SFF-8223, 2.5" Drive w/Serial Attachment
Connector
http://www.sffcommittee.org
May 2005
SFF-8201, 2.5” drive form factor
http://www.sffcommittee.org
April 2004
ATA-6 spec
http://www.t13.org/project/d1410r3b-ATA-ATAPI-6.pdf
April 2004
ATA-7 Volume 1
http://www.t13.org/Documents/UploadedDocuments/
docs2007/D1532v1r4bAT_Attachment_with_Packet_Interface__7_Volume_1.pdf
International Electrotechnical Commission
EN 61000
4-2
(Personnel Electrostatic Discharge
Immunity)
4-3
(Electromagnetic compatibility (EMC))
4-4
(Electromagnetic compatibility (EMC))
4-5
(Electromagnetic compatibility (EMC))
4-6
(Electromagnetic compatibility (EMC))
4-11 (Voltage Variations)
http://www.iec.ch
ENV 50204
(Radiated electromagnetic field from digital radio
telephones)
http://www.iec.ch
July 2007
1995
1996
1995
1995
1997
1994
1995
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
25
Intel® X18-M/X25-M SATA SSD
8.0
Terms and Acronyms
This document incorporates many industry- and device-specific words. Use the
following list to define a variety of terms and acronyms.
Table 18.
Glossary of Terms and Acronyms
Term
Definition
ATA
Advanced Technology Attachment
ATAPI
Advanced Technology Attachment Packet Interface
BER
Bit error rate, or percentage of bits that have errors relative to the total number of bits
received
BIOS
Basic Input / Output System
Chipset
A term used to define a collection of integrated components required to make a PC
function.
Device Initiated Link Power
Management (DIPM)
The ability of the device to request SATA link power state changes.
DIPM
Device Initiated Power Management (SATA hard disk drive)
DMA
Direct Memory Access
DRAM
Dynamic Random Access Memory
EXT
Extended
FP
First Party
GB
Giga-byte defined as 1x109 bytes
HCI
Host Controller Interface
HCT
Hardware Compatibility Test
HDD
Hard Disk Drive
Host Initiated Link Power
Management
The ability of the host to request SATA link power state changes.
Hot Plug
A term used to describe the removal or insertion of a SATA hard drive when the system is
powered on.
IOPS
Input output operations per second
iMSM
The Intel Matrix Storage Manager device driver and associated system software.
LBA
Logical Block Address
LPM
Link Power Management: the ability of the SATA link layer to enter one of two lower power
consuming states, partial and slumber
MB
Mega-bytes defined as 1x106 bytes
MP
Multi-Processor
MTBF
Mean time between failure
Native Command Queuing (NCQ)
The ability of the SATA hard drive to re-order commands in order to maximize the
efficiency of gathering data from the platters.
NOP
No Operation
NTFS
NT File System
OEM
Original Equipment Manufacturer
OS
Operating System
Port
The point at which a SATA drive physically connects to the SATA controller.
RAID
Redundant Array of Independent Disks
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
26
January 2009
Order Number: 319765-005US
Intel® X18-M/X25-M SATA SSD
Table 18.
Glossary of Terms and Acronyms (Continued)
Term
Definition
RMS
Root Mean Squared
RPM
Revolutions Per Minute
RTM
Release To Manufacture
SATA
Serial ATA
SFF
Small Form Factor
SMART
Self-Monitoring, Analysis and Reporting Technology: an open standard for developing hard
drives and software systems that automatically monitors a hard drive’s health and reports
potential problems.
SSD
Solid State Drive
TBD
To Be Determined
WHQL
Microsoft* Windows Hardware Quality Labs
Write Cache
A memory device within a hard drive, which is allocated for the temporary storage of data
before that data is copied to its permanent storage location.
VCCI
Voluntary Control Council for Interface
9.0
Revision History
Date
Revision
January 2009
005
Added Random IOPs numbers on page 1 and page 8.
Modified Identify Device Info for word 59 and 106 on page 20.
December 2008
004
Modified thickness information on the ordering table on page 2.
003
Included capacity and weight for 160 GB on page 1.
Updated ordering information on page 2.
Updated User Addressable Sectors for 160 GB on page 7.
Added 1.8” 8mm Intel X18-M SATA SSD mechanical info page 13.
Updated identify device information on words 60, 84, 85, 87, 88 and 100 on page 20.
Added VCCI certification on page 25.
July 2008
002
Modified Idle Power Number on page 1.
Modified Weights for different form factors on page 1.
Modified Shock Spec on page 1 and Table 10, Shock and Vibration Specifications.
Updated Active and Idle Power number on Table 8, Typical Power Consumption.
Corrected Temp Gradient unit on Table 9, Temperature Related Specifications.
Updated Identify Device Data on Table 16, Returned Sector Data.
Maximum Queue Depth number changed to 31 on 6.2.2.
Updated Sustained Read Bandwidth number on page 1 and Table 3 on page 7.
Added extra information on altitude in 3.4.2.
Updated RoHS reference in Table 17 on page 25.
May 2008
001
Initial Release. Earlier information released as Intel® High Performance Solid State Drive
Advance Product Manual - 318512-002US.
December 2008
January 2009
Order Number: 319765-005US
Description
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
27
Intel® X18-M/X25-M SATA SSD
Intel® X18-M/X25-M SATA Solid State Drive
Product Manual
28
January 2009
Order Number: 319765-005US
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising