- Computers & electronics
- Telecom & navigation
- Mobile phones
- Car kits
- Diamond Antenna
- HRKS
- Instructions
- 2 Pages
Diamond Antenna HRKS Mobile Antenna Mount Instructions
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
▼
Scroll to page 2
HRKS Adhesive Backed Antenna Mount General Specifications Adhesive backed for easy mounting UHF Mounting base, adjustable position Black Finish Power Rating: 350 Watts Coaxial Cable: 13.5” RG316 Teflon cable with SMA connector and PL259 adapter. RECOMMENDED ANTENNAS: NR770HA or NR770HB INSTALLATION INSTRUCTIONS 1. Choose desired mounting location on vehicle to ensure maximum strength of mount and best performance of antenna. Location must be a flat surface preferably window, roof, or trunk lid. Avoid obstructions such as window defrosters, hatches, or air spoilers. Figure A. 2. When desired location is determined, surface must be cleaned thoroughly to ensure proper adhesion to mounting surface. Figure B. Clean surface thoroughly 3. Mount must be attached with longer surface pointed to front of vehicle (Roof or Trunk mounting) or vertical (Window mounting) Figure C. WARNING: IF MOUNTED TO VEHICLE PAINT, IT COULD REMOVE OR DISCOLOR PAINT. CHOOSE MOUNTING LOCATION CAREFULLY. DIAMOND ANTENNA IS NOT RESPONSIBLE FOR ANY VEHICLE DAMAGED BY MOUNTING TO VEHICLE PAINT. Figure C Roof or Trunk mounting Figure A Figure B 1.5” 4” Window defrosters Window mounting Hatches or spoilers 4. Route coaxial cable from antenna mount to radio. Curved surfaces 5. Attach connector to radio. If radio has UHF connector, assemble PL-259 adapter to cable end and attach to radio. REMOVING MOUNT Figure D If it becomes necessary to remove HRK mount from vehicle, we suggest using heavy gauge fishing line to remove seal from surface of mount and vehicle. Figure D. ( NOTE: Contact Diamond Antenna customer service for reattachment kit) PARTS LIST Mount Attachment 0210101 HRKS Mount Plate 0210102 Mount Structure 0210108 Spring 0210104 Hex Nuts 0210109 Washer 0210105 Adhesive Sheet 0210103 Mount Plate Adjustment Knob 0210105 Adhesive Sheet DIAMOND ANTENNA Products are distributed by RF PARTS COMPANY 435 S. Pacific S treet San Marcos, CA 920 78 (770) 614-7443 DIAMOND ANTENNAS are distributed by R.F. Parts Co. San Marcos, Ca (760) 744-0900 www.diamondantenna.net Hex Wrench 0210107
advertisement