wireless - Veracity
I N S T A L L A T I O N
T O O L S
D ATA S H E E T
PORTABLE POE INSTALLATION TOOL & WIRELESS LINK
WIRELESS
WIRELESS
Install, configure,
focus andalign IP
cameras with a wireless link to your tablet or phone
POINTSOURCE Wireless is a battery
powered POE injector, with a wireless
network link, designed to allow simple
and efficient IP camera installation
with live video to smartphones, tablets
and laptops.
|
Allows local viewing of IP camera video wirelessly on smart devices close to camera
|
Enables rapid and precise adjustment of camera
alignment, focus and field of view
|
Removable, rechargeable battery with sufficient power
for a day’s installation work
|
Additional spare batteries available for rapid swap over
|
Supports all classes of 802.3af and 802.3at POE devices
|
Includes convenient USB charging point for tablets and smart phones
Portable POE battery pack with
removable, rechargeable battery
module, for site installation of IP
cameras and site surveys
POINTSOURCE WIRELESS has automatic camera discovery and wireless
video to your smart phone or tablet, and is ideal for powering POE IP
cameras in-situ, when in-line POE is not yet available. It includes a
convenient USB charging port for your phone or tablet.
Battery Powered POE Injector
Veracity’s POINTSOURCE Wireless is a
portable, battery-powered POE injector
providing wireless network access
to the IP camera it is powering. It is
connected directly to the camera using
a standard Ethernet network cable.
Wireless Network Access
POINTSOURCE Wireless delivers POE
to the camera and connects the IP
camera to the embedded wireless
access point. By logging into the
wireless network, live video can be
viewed wirelessly on a smartphone,
laptop or tablet.
POINTSOURCE Wireless features
automatic camera discovery, including
ONVIF. It has a default network SSID
with password and an IP address for
cAMPOINT
SMART APP
accessing the device itself. These may
be changed as required by the user.
The wireless link can be switched
between 2.4GHz and 5GHz. A reset
function is available to reset the device
to default factory settings.
configuration of the POINTSOURCE
Wireless itself and showing the IP
address of the connected camera.
Configuration functionality depends
upon the IP camera manufacturer’s
supported features and functions.
The wireless LED flashes as the unit
boots up and is steady when the link
is available. The POE port LED shows
when the camera is powered, whilst
the network port LEDs indicate the
wired link speed (10/100) and network
activity.
The system firmware is fieldupgradeable to allow updates for new
features and special camera types.
Browser Connection
Upon connecting to POINTSOURCE
Wireless with a wireless-networkenabled laptop, tablet or smartphone,
through a browser, the user is
presented with a web page, allowing
DATA
CAMPOINT Smart App
Veracity provide a smart app called
CAMPOINT (on iOS and Android) for
IP camera configuration. This enables
simple wireless viewing of video from
one or more IP cameras on a smart
phone or tablet. CAMPOINT runs on
smart phones and tablets to make IP
camera installations simple, fast and
convenient to use.
DATA
TABLET/
SMARTPHONE
POE
IP CAMERA
ETHERNET WITH POE
WIRELESS ETHERNET
POINTSOURCE Wireless powers the IP
camera with POE and provides wireless
network access to the camera.
I M A G I N A T I O N
|
I N N O V A T I O N
|
I N T E G R A T I O N
D ATA S H E E T
POINTSOURCE Wireless is an
indispensable tool for all IP
camera installers
The POINTSOURCE Wireless package includes the POINTSOURCE
Wireless unit, rechargeable battery module (removable), shoulder strap,
universal charger (UK, US, EU & AU plugs), and Quick Start Guide.
POE and POE Plus
LED Indicator
Battery Life and Status
POINTSOURCE Wireless complies
with universal IEEE 802.3af and IEEE
802.3at POE standards, and can
deliver up to 25 watts of POE power.
Integrated network crossover ports
allow the direct connection of a laptop,
smartphone, or tablet (shown in the
diagram opposite).
The POE port LED indicates when POE
is being delivered to a compatible
device connected to the Camera port.
If an incompatible device is connected
(or needs too much power) then the red
LED will flash indicating the problem.
POINTSOURCE Wireless has a battery
life of 3 to 5 years, or 200 - 1000 cycles
depending upon discharge depth and
operating temperature. The battery
status indicator shows the remaining
charge in steps of 25%. The simple
design of the system allows a battery
to be recharged whilst POINTSOURCE
Wireless continues to be used with a
second battery.
USB Charging Point
A convenient 5V USB port is provided
for charging smart phones and tablets,
whilst on site. The USB port has no data
connection function.
Removable Battery Module
POINTSOURCE Wireless has an easily
removable, rechargeable battery module
which provides enough power for a
full day’s installation work. The quick
release battery module is removed
for recharging purposes.
Extra battery modules are available
as an option.
IP CAMERA INSTALLATION TOOL COMPARISON TABLE
PRODUCTCONNECTION
PINPOINT™
Wired connection
PINPOINT Wireless™
POINTSOURCE Plus™
POINTSOURCE Wireless™ Wireless connection
Wired connection
POE POWER SOURCE
w
Requires POE input (pass-through)
w
Provides POE output (from battery)
Wireless connection
*Additional battery modules are available. Part code VAD-PS-BM
www.veracityglobal.com
I N S T A L L A T I O N
T O O L S
WIRELESS
TECHNICAL SPECIFICATION
POWER
POE output
USB charging port
Battery type
Discharge time
Charger
NETWORK
Wired network interface
IP setting
Wireless network interface
Wireless SSID
Wireless security
48V DC, IEEE 802.3af/at compliant (POE, POE Plus)
5V, 2.1A, power only, no data
Maintenance-free, sealed lead-acid battery, 12V, 3.4Ah
6 hours continuous for a 5 watt camera (typical)
Three-stage intelligent (14.4V / 1A / 13.8V float)
‘Camera’ port: 10BaseT/100BaseTX with POE
‘Network’ port: 10BaseT/100BaseTX data only
Automatic or manual configuration of IP address (IPv4)
IEEE 802.11b/g/n/ac
2.4GHz b/g/n (default) – channels 1, 6 or 11
5GHz a/ac/n – channels 36, 40 or 44
User configurable
WPA2-PSK with user configurable password
LED INDICATORS & CONNECTORS
POE status indicator
Battery status indicator
Network port LEDs
Wireless indicator
Network connectors
USB connector
Charging connector
Red LED shows ON, flash indicates error, off indicates no POE
Green four-bar display indicates charge level: 100% - 75% - 50% - 25%
Green: Link speed
Orange: Network activity
Blue LED ON shows wireless link on; flash indicates booting up
2 x RJ45, one with POE
1 x USB Type A (power only)
2.1mm jack, centre positive (on battery module – remove to charge)
COMPATIBILITY
Camera discovery
Supported IP cameras
Automatic camera discovery using Bonjour or WS-Discovery (ONVIF)
All IP cameras supporting live-viewing via browser on smart device
or with RTSP url address and CAMPOINT Smart App
PHYSICAL / ENVIRONMENTAL
Dimensions
Weight
Operating temperature
Storage temperature
Battery charging temperature Relative humidity
L 205mm W 100mm H 150mm ( 5 5/16 x 3 15/16 x 8 1/16 in)
Unit including battery module: 2.2kg (4.8lb) Battery module: 1.6kg (3.5lb)
0°C to 50°C (32°F to 122°F)
-30°C to 70°C (-22°F to 158°F)
0°C to 35°C (32°F to 95°F)
20% to 85%, non-condensing
COMPLIANCE
Main unit
Battery module
EN 55022 Class B, FCC Part 15 Subpart B Class A + B, ICES-003 Class B,
VCCI Class B, C-tick S/NZS CISPR 22 Class B, IEC/EN/UL 60950-1, CE,
RoHS, REACH, WEEE
UL, IMDG, IATA (non-restricted, OK to transport by air), CE, RoHS,
WEEE, ADR, ECHA, DoT
WARRANTY
Veracity 2-year warranty
PRODUCT CODES
VAD-PSW
VAD-CHGR VAD-PS-BM
POINTSOURCE Wireless unit, portable POE injector. Includes carry strap,
battery module, universal charger (UK, US, EU, AU ) and Quick Start Guide.
Additional battery charger
Additional battery module
* The Battery Module is WEEE Compliant. When the battery has reached end-of-life it must be disposed of either at a lead-acid battery collection facility,
or via Veracity’s defined RMA process. Please contact rma@veracityuk.com or support@veracityusa.com for further details.
Americas Sales
Veracity USA Inc.
Tel: 1-800-679-1590
Fax: 1-800-679-0714
www.veracityglobal.com
sales@veracityusa.com
POINTSOURCE Plus is also available,
providing battery-powered POE at lower cost
for a wired connection to a local laptop.
© Veracity UK Ltd 2016 All rights reserved. WV1.2 UK
Under no circumstances should this document be reproduced,
distributed or changed, partially or wholly, without written,
formal authorisation from Veracity UK Ltd.
PINPOINT, PINPOINT Wireless, POINTSOURCE Plus,
POINTSOURCE Wireless are trademarks of Veracity UK Ltd
EMEA Sales
Veracity UK Ltd
Prestwick International Aerospace Park
4 Dow Road
Prestwick
KA9 2TU
UK
Tel +44 (0) 1292 264967
Fax +44 (0) 845 528 1081
www.veracityglobal.com
sales@veracityuk.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising