Sensor®+ Racks ETC
ETC®
Sensor®+ Racks
Sensor+ Series
O R D E R I N G I N F O R M AT I O N
Installation Racks
MODEL
DESCRIPTION
SR48+
Sensor+ 48 Module Rack
SR24+
Sensor+ 24 Module Rack
SR12+
Sensor+ 12 Module Rack
SR6+
Sensor+ 6 Module Rack
SR24+1P
Sensor+ 24 Module Single Phase Rack
SR12+1P
Sensor+ 12 Module Single Phase Rack
SR6+1P
Sensor+ 6 Module Single Phase Rack
Rack Options*
MODEL
DESCRIPTION
AT48
Amp-Trap fuse option for 48-module rack
AT24
Amp-Trap fuse option for 24-module rack
AT12
Amp-Trap fuse option for 12-module rack
G E N E R A L I N F O R M AT I O N
BK48
Bus kit for 2 – 48-module racks
Sensor+ dimming systems provide high density, professional features
and exceptional reliability for lighting applications that require the
best the entertainment industry can offer.
BK24
Bus kit for 2 – 24-module racks
BK12
Bus kit for 2 – 12-module racks
AUX30-48
30” Auxiliary Rack(s) for 48-module rack
APPLICATIONS
• Professional and educational theatre
• Production studios
• Concert and performance halls
• Themed retail and dining
• Multi-use Convention Centers
• Houses of Worship
FEATURES
• High dimmer density
• Up to two 2.4kW dimmers per module
• 6, 12, 24, and 48 module racks available
• Rugged industrial construction
• Installation flexibility
• Adaptable modular design
• 100,000A Short Circuit Current Rating (SCCR)
• Advanced configuration editing built into rack
• Stores up to 128 presets in memory
• Direct Ethernet control signal input
• Two DMX512-A inputs
• Standard system and rack monitoring with
diagnostic reporting
• Supports ETC Dimmer Doubling™
ACCESSORIES
• SmartLink® Button Stations and SmartLink TimeClock
• Dimmer Doubler
• Sound Suppression Hood
• Floor pedestal for 24-module rack
• Document holder
AUX19-48
19” Auxiliary Rack(s) for 48-module rack
AUX19-24
19” Auxiliary Rack(s) for 24-module rack
AUX19-12
19” Auxiliary Rack(s) for 12-module rack
Vibration Reduction mounts available for all Sensor+ racks. Contact ETC for details.
Note: Power feeds above 800A up to 2000A require addition of a 30” auxiliary rack.
*
Rack Accessories
MODEL
DESCRIPTION
SSSh24-48
Sensor+ Sound Suppression Hood – large
SSSh6-12
Sensor+ Sound Suppression Hood – small
Pedestal
Floor pedestal for 24-module rack
DH
Document Holder
SmartLink Accessories
MODEL
DESCRIPTION
S-LPB
SmartLink Power Board for Sensor+ Racks*
S-10005
SmartLink 5-Button Station*
S-10010
SmartLink 10-Button Station*
*One SmartLink Power Board required for station support.
S-LPB supports up to four stations.
Only one S-LPB may be enabled in a system.
1 of 4
ETC®
Sensor®+ Racks
Sensor+ Series
S P E C I F I C AT I O N S
A D D I T I O N A L I N F O R M AT I O N
GENERAL
• Racks available in four sizes:
-- SR6+
6 modules, 12 dimmers maximum
-- SR12+ 12 modules, 24 dimmers maximum
-- SR24+ 24 modules, 48 dimmers maximum
-- SR48+ 48 modules, 96 dimmers maximum
• Dual density (two dimmers per module), single density and
half density dimmer modules available
• Operating temperature: 0-40°C / 32-104°F
-- Dimmer room HVAC systems must at all times maintain
the specified ambient temperature at the dimmer rack.
Dimming systems operating within 10°F of the upper or
lower temperature limits must strictly follow installation
and operation guidelines to operate reliably.
• Relative humidity: 10-90% non-condensing
• All racks UL and cUL Listed
• UL924 Listed for Bypass operation
MECHANICAL
• Rugged 16-gauge steel construction
• Fine-textured, scratch-resistant, epoxy paint
• SR6+ and SR12+ uses wall mount installation
• SR24+ can be wall or pedestal mounted
• SR48+ is floor mounted
• Top and bottom conduit access through removable panels
(SR48+) or knockouts (SR6+, SR12+, and SR24+)
• No tools required for module removal or installation
• Keyed module slots prevent insertion of inappropriate
module types
• Front access to all wiring and terminations
• Full height locking door
• Electrostatic air filter easily removed from door for
periodic cleaning
• High efficiency cooling system with airflow sensor
• High visibility LED status beacon
ELECTRICAL
• SR6+, SR12+ and SR24+ accept:
-- Three phase 120/208 VAC
-- Single phase 120/240 VAC
• SR48+ accepts:
-- Three phase 120/208 VAC
• Line feed frequencies from 47-63Hz
• Line feed voltage range is 91-139 VAC*
• Load terminals accept up to #4 AWG (25mm2) wire
• Short Circuit Current Rating: 100,000A RMS symmetrical
at 240VAC
• Auxiliary equipment racks and custom switchgear/distribution
available (call ETC for details)
*Note: Suggested max main transformer tap 135V to allow for
line fluxuation
CONTROL ELECTRONICS
• Sensor+ Control Electronics Module (CEM+)
• Single Ethernet control signal input
• Two DMX512-A inputs
• Standard diagnostic reporting via browser-based interface or
DimStat™ software
• Supports Dimmer Doubling™
• Supports SmartLink® control of presets
OPTIONS
• Advanced Features (AF) dimmer-specific load and
diagnostic reporting
• Amp-Trap® fuses to allow feeding individual racks from
oversize mains
• Bus kits available
• Vibration reduction kits available for all racks
• SmartLink Power Board
• SmartLink TimeClock
Compatible Dimmer Modules
SENSOR STANDARD MODULES
MODEL
DESCRIPTION
D15/D20
Dual 15A/20A Dimmer Module – 350μS
D15E/D20E
Dual 15A/20A Dimmer Module – 500μS
D50AF
Single 50A Dimmer Module – 500μS – AF
D100AF*
Half 100A Dimmer Module – 500μS – AF
SENSOR SPECIAL PURPOSE MODULES
ELV10
Dual 10A Dimmer Module for electronic low
voltage transformers
D15FB/D20FB
Single 15A/20A Dimmer Module for two wire
fluorescent with emergency battery backup
D15F/D20F
Single 15A/20A Fluorescent Dimmer Module
R15AF/R20AF
Dual 15A/20A Relay Module
CC15/CC20
Dual 15A/20A Constant Circuit Breaker Module
AFM
Air Flow Module
*Half-density modules use two module slots.
Control Modules
MODEL
DESCRIPTION
CEM+
Control Electronics Module +
Load Wiring Lug Capacity
CONNECTION
WIRE SIZE
10A, 15A, 20A, and 50A lugs
4 AWG Max. (25mm2)
100A lugs
2/0 Max.
Primary Feed Lug Capacity
CONNECTION
WIRE SIZE
FEED RATING
SR48+
Dual 600 kcmil – 2 AWG
800A*
SR24+
Dual 350 kcmil – 4 AWG
400A
SR12+
Dual 250 kcmil – 6 AWG
200A
SR6+
Single 2/0 – 14 AWG
100A
Sound Pressure Level (dBA)
MODEL
dBA @ 1000Hz (1kHz)**
WITHOUT
WITH SSSh***
SR48+
37.0
30.9
SR24+
40.2
34.0
SR12+
41.8
33.8
SR6+
26.0
21.4
*With addition of an AX48-30 rack and amp traps, feeder sizes can increase up to 2000A max.
See Sensor Aux Bay Data sheet for more details.
**dBA values for each Sensor rack measured at one meter. Visit www.etcconnect.com for full
spectrum dBA ratings.
***Sensor S ound Supression hood (SSSh).
2 of 4
ETC®
Sensor®+ Racks
Sensor+ Series
TYPICAL SYSTEM RISER
DMX Plug-in
DMX
Booth
DMX Plug-in
DMX
SmartLink®
Stage
Preset 1
Preset 2
Preset 3
Preset 6
Preset 7
Preset 8
Preset 1
Preset 4
Preset 9
Preset 5
Preset 10
Preset 2
Preset 3
Preset 1
Preset 6
Preset 4
Preset 2
Preset 7
Preset 5
Preset 3
Preset 8
Preset 1
Preset 4
Preset 9
Preset 5
Preset 10
Preset 2
Preset 3
Preset 4
Preset 5
Congo® jr™ Console
Sensor+ Dimming System
TYPICAL NETWORK RISER
Link Power
Aux Power
Unison® Control Stations
Link Power
PC for ETC software
CMEi in
ER4 Rack
Switch
Radio Focus
Remote
(Transmitter)
Eos Remote Video Interface
Eos® Console
DMX
Net3 DMX Gateway
Net3™ DMX Gateway
DMX from
external source
Sensor+ Dimming System
Radio Focus
Remote
(Receiver)
3 of 4
To moving lights
or any DMX device
ETC®
Sensor®+ Racks
Sensor+ Series
PHYSICAL
Empty Dimmer Rack Weights
MODEL
WEIGHT
SHIPPING WEIGHT
lbs
kgs
lbs
kgs
188
86
198
90
SR48+ Door
31
14
35
SR24+
107
49
115
SR24+ Door
17
8
20
SR12+
45
21
50
23
SR12+ Door*
11
5
14
6.5
SR6+ with Door
36
16
45
21
SR48+
*
*
Installation Rack Dimensions
MODEL
HEIGHT
WIDTH
DEPTH
inches
mm
inches
mm
inches
mm
SR48+
83.1
2110
14.6
370
22.8
580
16
SR24+
45.8
1160
14.6
370
16.8
430
53
SR12+
25.8
660
14.6
370
13.3
340
9
SR6+
16.4
420
14.6
370
13.3
340
Rack doors ship separately.
*
SR48+
Full Dimmer Rack Weights
MODEL
MAX. WEIGHT
TYPICAL WEIGHT
lbs
kgs
lbs
kgs
SR48+
493
224
459
209
SR24+
261
119
244
111
SR12+
115
53
105
48
SR6+
71
33
66
30
Maximum – D100AF modules (11.7lbs/slot)
*
All racks
require minimum
clearance
above fan
10.0”
250mm
83.1”
2110mm
SR24+
Typical – D20 modules (5lbs/slot)
Refer to module datasheets to calculate rack weight for other module types.
45.8”
1160mm
SR12+
25.8”
660mm
SR6+
16.4”
420mm
Wall or
other
barrier
(all racks)
14.6”
370mm
14.6”
370mm
13.3”
340mm
6”
150mm
13.3”
340mm
17”
460mm
17”
460mm
14.6”
370mm
14.6”
370mm
6”
150mm
6”
150mm
16.8”
430mm
22.8”
580mm
17”
460mm
6”
150mm
17”
460mm
Corporate Headquarters • 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA • Tel +1 608 831 4116 • Fax +1 608 836 1736
London, UK • Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK • Tel +44 (0)20 8896 1000 • Fax +44 (0)20 8896 2000
Rome, IT • Via Pieve Torina, 48, 00156 Rome, Italy • Tel +39 (06) 32 111 683 • Fax +44 (0) 20 8752 8486
Holzkirchen, DE • Ohmstrasse 3, 83607 Holzkirchen, Germany • Tel +49 (80 24) 47 00-0 • Fax +49 (80 24) 47 00-3 00
Hong Kong • Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong • Tel +852 2799 1220 • Fax +852 2799 9325
Web • www.etcconnect.com • Copyright©2011 ETC. All Rights Reserved. All product information and specifications subject to change. 7151L1001 Rev. I USA 07/11 Sensor® products protected by one or more of the following U.S. Patent Numbers 5,323,088, 5,352,088, 7,233,112, 7,019,469, 6,849,943, and 6,002,563; European Number 0603333T2; German 69203609.
4 of 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising