Cable Management

Cable Management Solutions
Glide Cable Management Solutions.................................. 9.2
19" Cable Management Solutions.................................... 9.7
FiberGuide® Fibre Management System.......................... 9.10
9. Cable Management Solutions
Plenum FiberGuide® System............................................ 9.21
09/08
•
400836IN
TrueNet® Structured Cabling
Search
www.adckrone.com/in • INDIA 1800 425 8232
9.1
Search
Cable Management Solutions
ADC KRONE’s Glide Cable Management System is the solution
to long term efficiency in the building distributor, floor distributor
or any IT environment where patching is required. No matter
how long the patch cords and no matter how many cords are
used, Glide provides a neat, well managed and user friendly
cabling infrastructure allowing moves, adds and changes to
take place quickly and accurately.
The Glide vertical managers attach to each side of the 19"
rack, ensuring that the front of rack is left available for patch
panels and other patching equipment. As horizontal patch cord
minders are no longer required for every patch panel, more rack
units can be populated with patch panels or any other patching
equipment. This in turn leads to a saving in floor space, which is
valuable in high-density environments such as call centres.
The Glide system works by managing excess lengths of cable
through a series of vertical spools called ‘slack managers’
located within the Glide verticals. Each Glide vertical also has
a rib cage, which is its own set of outer cable managers. The
patented rib cages are designed to accommodate patch cords
at the front of the rack and terminated solid cables at the rear
of the rack. While decreasing the initial installation time, this
provides greater access for technicians when maintenance is
required.
400836IN
The patented rib cage design eliminates horizontal patch cord
minders and rear cable management trays. It can be used as
a single rack or inter rack unit and offers greater patch panel
density over traditional 19" cabinets.
•
With integrated front, rear, horizontal and vertical cable
management, the Glide system has built-in bend radius
protection, ensuring network integrity. The built-in slack
managers allow excess patch cord length to be easily managed
avoiding cable management nightmares.
Optional crossover troughs and horizontal cable managers are
available.
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Glide Cable Management Solutions
9.2
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
Glide Cable Management Solutions
Vertical mount managers
09/08
•
Description
Product No.
Glide 6" vertical cable manager, front only
ADCCMVIBS06F-2
Vertical mounted Glide cable manager, black in
colour and 6" (152mm) wide. Eliminates horizontal
patch cord minders. The 4 integrated slack
managers allow patch cords of any length to be
routed neatly whilst still easily accessible. Ideal for
use at the start or end of an installation of racks.
To equip both sides of a 19” rack, order 2 of these
parts.
Glide 8" vertical cable manager, front and rear
ADCCMS-08
Vertical mounted Glide cable manager, black in
colour and 8" (203mm) wide. Patented rib cage
design eliminates horizontal patch cord minders and
rear cable management trays. The 4 integrated slack
managers allow patch cords of any length to be
routed neatly whilst still easily accessible. Ideal for
use in between racks as an interconnect. To equip
both sides of a 19" rack, order 2 of these parts.
Glide 10" vertical cable manager, front and rear
Glide 6”
9. Cable Management Solutions
400836IN
TrueNet® Structured Cabling
Ordering Information
ADCCMS-10
Vertical mounted Glide cable manager, black in
colour and 10" (254mm) wide. Patented rib cage
design eliminates horizontal patch cord minders and
rear cable management trays. The 4 integrated slack
managers allow patch cords of any length to be
routed neatly whilst still easily accessible. Ideal for
use in between racks as an interconnect. To equip
both sides of a 19" rack, order 2 of these parts.
Glide 8”
Hinged Covers
Ordering Information
Description
Product No.
Glide 6" Hinged Cover
ADCC06-2
Hinged black cover to suit the Glide 6" vertical cable
manager, front only. The kit contains (2) covers for
one side of the 19" rack. To cover both sides of a
19" rack, order 2 kits.
Glide 8" Hinged Cover
ADCCMVIBC08B4
Hinged black cover to suit the Glide 8" vertical cable
manager. The kit contains (4) covers for both the
front and rear. To equip both sides of a 19" rack both
front and rear, order 2 kits.
Glide 10" Hinged Cover
ADCCMVIBC10B4
Hinged black cover to suit the Glide 10" vertical
cable manager. The kit contains (4) covers for both
the front and rear. To equip both sides of a 19" rack
both front and rear, order 2 kits.
Hinged cover
www.adckrone.com/in • INDIA 1800 425 8232
9.3
Search
Cable Management Solutions
Glide Cable Management Solutions
Horizontal Mount managers
400836IN
•
Description
Product No.
Glide 2RU horizontal crossover trough
ADCCMTG02
Horizontal Glide crossover trough handles all
cable and patch cord routing requirements, black
in colour and 2RU. Designed for top, middle or
bottom of rack. Built in bend radius protection
ensures network integrity. To equip both the front
and rear of the 19" rack, order 2 of these parts.
Glide 4RU horizontal crossover trough
Glide 2RU Horizontal
Crossover Trough
ADCCMTG04
Horizontal Glide crossover trough handles all
cable and patch cord routing requirements, black
in colour and 4RU. Designed for top, middle or
bottom of rack. Built in bend radius protection
ensures network integrity. To equip both the front
and rear of the 19" rack, order 2 of these parts.
Glide 2RU horizontal cable manager
ADCCMHIB-2U
Horizontal Glide cable manager handles all cable
and patch cord routing requirements, black in
colour and 2RU. Designed for top, middle or
bottom of rack. Built in bend radius protection
ensures network integrity. Front cover hinges down
to allow easy access when required. To equip both
the front and rear of the 19" rack, order 2 of these
parts.
Glide 4RU Horizontal
Crossover Trough
Glide 2RU Horizontal Cable
Manager
Rack
Ordering Information
Description
7' Equipment Rack
Product No.
ADCRACKBLK73
7' Rack
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Ordering Information
9.4
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
Glide Cable Management Solutions
Figure 1: Connect ports to the same side of
the same bay using vertical cable managers
with slack managers for handling extra cable
lengths.
2
2
Figure 2: Vertical cable managers integrate
cables and maintain neatness in ladder rack
and raised floor applications.
1
Figure 3: Upper and lower crossover
managers enable connection of ports on
opposite sides of the bay while maintaining
an orderly appearance.
1
15650-B
Figure 1
To
Equipment
400836IN
Overhead
Cabling
1
1
09/08
•
1
2
2
2
15647-B
15648-B
Raised
Floor Cabling
To
Equipment
Figure 3
Figure 2
www.adckrone.com/in • INDIA 1800 425 8232
9.5
9. Cable Management Solutions
TrueNet® Structured Cabling
Upper and lower crossover managers with
vertical cable managers enable easy, intuitive
cable routing.
Search
Cable Management Solutions
400836IN
•
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Glide Cable Managment Solutions
9.6
Key (Product Numbers)
1 - ADCRACKBLK73
5 - ADCCMHIB-2U
2 - ADCCMS-08
6 - ADCC06-2
3 - ADCCMVIBS06F-2
7 - ADCCMVIBC08B4
4 - ADCCMTG02
8 - ADCCMTG04
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
19" Cable Management Solutions
Used for superior horizontal cable management
of patch cords (1RU). Ideally suited for Category 6
applications by helping to maintain optimum bend
radius. The unique mounting feature allows for the
minders to clip directly to 19" racks without the
need for cage nuts.
5-ring Patch Cord Minder
Ordering Information
Description
Quantity
Colour
Product No.
5-ring Patch Cord Minder
Box of 1
Grey
6450 1 050-20
5-ring Patch Cord Minder
Box of 5
Grey
6450 5 050-20
5-ring Patch Cord Minder
Box of 1
Black
6450 1 050-30
5-ring Patch Cord Minder
Box of 5
Black
6450 5 050-30
9. Cable Management Solutions
TrueNet® Structured Cabling
5-ring Patch Cord Minder
Highway Patch Cord Minder
Highway Patch Cord Minder for 19" rack mounting.
Used for horizontal cable management (1RU).
Includes 4 jumper rings. Additional jumper rings
may be clipped to the rear for additional cable
management.
Highway Patch Cord Minder
09/08
•
400836IN
Ordering Information
Description
Quantity
Colour
Product No.
Patch Cord Minder
Box of 1
Black
6450 1 050-10
Patch Cord Minder
Box of 1
Grey
6450 1 050-00
Highway Patch Cord Minder with
Jumper Ring Kit
Highway Patch Cord Minder for 19"
rack
mounting.
Used
to
assist
with
horizontal
cable
management
(1RU).
Includes 8 jumper rings, 4 on the front and an
additional 4 that can be added to the back of the
minder for rear cable management.
Patch Cord Minder with Jumper Ring Kit
Ordering Information
Description
Quantity
Colour
Product No.
Patch Cord Minder with Jumper Ring Kit
Box of 1
Black
6450 1 050-01
www.adckrone.com/in • INDIA 1800 425 8232
9.7
Search
Cable Management Solutions
19" Cable Management Solutions
400836IN
•
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Jumper Ring Kit
Kit consists of 4 additional jumper rings for
mounting on the rear of the Highway patch
cord minder.
19" Jumper Ring Kit
Ordering Information
Description
Quantity
Colour
Product No.
19" Jumper Ring Kit
Box of 4
Grey
6450 2 016-00
19" Jumper Ring Kit
Box of 4
Black
6450 2 016-10
Rack Mount Jumper Rings
Jumper rings are used in 19" rack mounting
applications to assist with jumper management.
Plastic Jumper Ring
Ordering Information
Description
Quantity
Colour
Product No.
Plastic Jumper Ring
Bag of 1
Grey
6462 3 089-00
Plastic Jumper Ring
Bag of 1
Black
6462 3 089-03
Patch Cord Minder 2 Rack Unit
Used in 19" racks to assist with horizontal
cable management (2RU). Has large plastic
jumper rings.
Patch Cord Minder 2RU
Ordering Information
Description
Quantity
Product No.
Patch Cord Minder 2RU
Box of 1
6450 1 045-00
19" Patch Cord Minder (metal)
Used in 19" racks to assist with horizontal cable
management (2RU). Has large metal jumper rings.
Patch Cord Minder
Ordering Information
9.8
Description
Quantity
Colour
Product No.
Patch Cord Minder
Box of 1
Grey
6450 2 017-00
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
19" Cable Management Solutions
The Patch Cord Management Arm has been
designed for use in 19" racks when conventional
horizontal patch cord minders are not in use.
This product fits in place of the end cap on each
side of a patch panel and manages the cords from
2 panels.
The Patch Cord Management Arm is ideal for use with
ADC KRONE’s Dynamic Angled Patch Panel and can
also be used with any other type of patch panel.
Patch Cord Management Arm 2RU
Ordering Information
Description
Quantity
Colour
Product No.
Box of 10
Black
6450 1 188-00
Patch Cord Management Arm 2RU
Box of 10
Grey
6450 1 188-01
9. Cable Management Solutions
Patch Cord Management Arm 2RU
19" Label Holder Kit
The 19" Cover Label Kit has been designed for use
with ADC KRONE’s Dynamic Angled Patch Panel.
As well as hiding patch cords, it provides additional
labelling for 2 patch panels, so that when patched,
panels and port locations can be easily identified.
The cover clips securely onto the Cable
Management Arms (included) without the need
for any tools and can be easily removed when
panel maintenance or patching is required. Kit
includes 2 black patch cord management arms
and 1 cover label.
19” Label Holder Kit
09/08
•
400836IN
TrueNet® Structured Cabling
Patch Cord Management Arm
Ordering Information
Description
Quantity
Colour
Product No.
19" Label Holder Kit
Box of 1
Black
6450 1 189-00
www.adckrone.com/in • INDIA 1800 425 8232
9.9
Search
Cable Management Solutions
FiberGuide® Fibre Management System
4x12 90° Horizontal Elbow
FGS-MH9E-F
4" Express Exit
FGS-MEXP-E-A/B/F
4x12 Horizontal T with single 6" Exit
FGS-MHRT-F/B
4x12 Horizontal T
FGS-MHRT-F
4x24 Island T with Single 12" Exit
FGS-MHRT-H/F
4x12 Straight Section
FGS-MSHS-F
Express Exit
FGS-MEXP-A/B/F
4x6 45° Down Elbow
FGS-MD4E-B
4x12 45°
Down Elbow
FGS-MD4E-F
Trumpet Flare
FGS-MTRM-F
4x6 45° Up Elbow with Cover
FGS-MU4E-B
4x12 to Dual 4x6 Adaptor
FGS-MDSA-F2B
4x6 Straight Section
FGS-MSHS-B
4x24 45° Up Elbow
FGS-MU4E-H
4x6 Horizontal Cross
FGS-MHXP-B
Low Profile Express Exit
FGS-MEXP-LP-A/B/F
4x6 90° Down Elbow
FGS-MD9E-B
4x12 Horizontal
Cross with two
6" Exits
FGS-MHXP-B/F
Trumpet Flare
FGS-MTRM-G
4x6 45° Horizontal Elbow
FGS-MH4E-B
4x6 to 4x6 Adapter
FGS-MH4E-B
4x6 90° Up Elbow
with cover
FGS-MU9E-B
4x4 Cut in T for 4x24 FiberGuide®
FGS-MHIS-A/H
4x4 90° Horizontal Elbow
FGS-MH9E-A
4x6 Straight Section
FGS-MSHS-A
2x2 to 4x4 Adapter
FGS-MDSA-AC
400836IN
2x2 90° Extended
Horizontal Elbow
FGS-MH9A-C-45/2
or
2x2 90° Horizontal Elbow
FGS-MH9A-C
•
9.10
4x24 Horizontal Cross
FGS-MHXP-H
4x24 Straight Section
FGS-MSHS-H
4x12 to 4x24 Adaptor
FGS-MDSA-H/F
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
FiberGuide® is a raceway system designed to protect and route fibre optic patch cords,
multi-fibre cable assemblies and intrafacility fibre cable (IFC) to and from fibre splice
enclosures, fibre distribution frames and fibre optic terminal devices. FiberGuide® ensures
a two-inch minimum bend radius is maintained throughout the system.
Tool-less, Snap-Fit™ junctions, cover options and Express Exit™ drops significantly reduce
the amount of time required for installation.
www.adckrone.com/in • INDIA 1800 425 8232
2x2 Horizontal
Straight Section
FGS-MSHA-A
Search
Cable Management Solutions
FiberGuide® Fibre Management System
09/08
•
ADC KRONE’s FiberGuide® Fibre Management Systems offer the greatest breadth
of optical raceway products in the industry. In response to customer requirements,
ADC KRONE continues to innovate and improve FiberGuide® Systems, adding
greater flexibility and driving down installation time to ensure a smooth deployment.
FiberGuide® is a raceway system designed to protect and route fibre optic patch cords, multifibre cable assemblies and intrafacility fibre cable (IFC) to and from fibre splice enclosures, fibre
distribution frames and fibre optic terminal devices. FibreGuide® ensures a two-inch minimum bend
radius is maintained throughout the system. And new tool-less, SnapFit™ junctions, cover options
and Plenum Express Exit™ drops significantly reduce the amount of time required for installation.
The FiberGuide® system is a complete set of products designed and manufactured to ensure total
off-frame protection and ease of use. Basic components include horizontal and vertical straight
sections, horizontal and vertical elbows, downspouts, junctions and numerous support hardware
and flex-tube kits.
Available in a variety of sizes:
9. Cable Management Solutions
400836IN
TrueNet® Structured Cabling
The Industry’s Most Comprehensive Optical Raceway System
2x2 — Ideal for smaller installations or for vertical routing of
a maximum of four hundred 2mm fibre optic patch cords.
All 2x2 FiberGuide® products are shipped with covers.
2x6 — Designed for height-restricted environments,
this robust system provides the same support and
system flexibility of the traditional 4-inch high system
while saving 2 inches of overhead space. It features
a maximum capacity of 1,200, 2mm patch cords.
4x4 — Features the maximum capacity to
support 1,600, 2mm patch cords. It has been
engineered to allow straight sections to be selfsupporting over a span of up to 6 feet (1.83m).
4x6 — Features the same benefits of the 4-inch system and
a maximum trough capacity of 2,400, 2mm patch cords.
4x12 — The largest system in the FiberGuide® family, this
12-inch wide trough has a maximum capacity to support
nearly 5,000, 2mm patch cords. Perfect for runs over fibre
frame lineups and perimeter routes.
www.adckrone.com/in • INDIA 1800 425 8232
9.11
Search
Cable Management Solutions
FiberGuide® Fibre Management System
and
9.12
Benefits
Speed of Installation
FiberGuide® systems feature a variety of products that allow for quick and easy installation. Express Exit™
drops as well as tool-less products including Snap-Fit™ junctions, snap-on covers and new hinged cover
options save valuable time for installers.
Speed of Deployment
The Express Exit™ system enables new drops to be added or removed quickly and easily. A drop can be
added into a fully loaded raceway in seconds—without cutting.
Raceway Flexibility
FiberGuide® features 38 support structures, over 75 fittings, multiple drop options and several other
components to suit any application you create.
Fibre Protection
ADC KRONE’s broadband expertise translates into maximum protection for your network. Two inch minimum
bend radius is maintained throughout the system regardless of the raceway size.
Strength and Durability
100% raceway reliability—stands up to any challenge.
•
400836IN
Features
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Fibre Cable Raceway Systems
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
FiberGuide® Fibre Management System
09/08
•
Recommended capacity takes into consideration random jumper placement into the FiberGuide®
system. Maximum density refers to the maximum number of fibre jumpers in a given cross-section
of a FiberGuide® installation.
ADC KRONE Recommended Density
Recommended
Patch Cord
Density (per in2)
1.7mm
Patch Cords
2.0mm
Patch Cords
3.0mm
Patch Cords
120
90
40
2x2
2x6
4x6
4x4
4x12
FiberGuide® System FiberGuide® System FiberGuide® System FiberGuide® System FiberGuide® System
Trough
Pileup
1.7
mm
2.0
mm
3.0
mm
1.7
mm
2.0
mm
3.0
mm
1.7
mm
2-inch
3-inch
4-inch
480
-
360
-
160
-
1440
-
1080
-
480
-
960 720
1440 1080
1920 1440
2.0
mm
3.0
mm
1.7
mm
2.0
mm
320
480
640
1440 1080
2160 1620
2880 2160
3.0
mm
1.7
mm
2.0
mm
480
720
960
2880 2160 960
4320 3240 1440
5760 4320 1920
3.0
mm
Maximum Density
Maximum
Patch Cord
Density (per in2)
1.7mm
Patch Cords
2.0mm
Patch Cords
3.0mm
Patch Cords
142
102
44
2x6
4x6
4x4
4x12
2x2
FiberGuide® System FiberGuide® System FiberGuide® System FiberGuide® System FiberGuide® System
Trough
Pileup
1.7
mm
2.0
mm
3.0
mm
1.7
mm
2.0
mm
2-inch
3-inch
4-inch
568
-
408
-
176
-
1704 1224
-
3.0
mm
1.7
mm
528
-
1136 816 352
1704 1224 528
2272 1632 704
2.0
mm
3.0
mm
1.7
mm
2.0
mm
3.0
mm
1.7
mm
2.0
mm
3.0
mm
1704 1224 528 3408 2448 1056
2556 1836 792 5112 3672 1584
3408 2448 1056 6816 4896 2112
TracerLight™ Patch Cords—65 Patch Cords per in2
4x6
4x4
4x12
2x2
2x6
Trough
®
®
®
®
®
Pileup FiberGuide System FiberGuide System FiberGuide System FiberGuide System FiberGuide System
2-inch
3-inch
4-inch
260
-
780
-
520
780
1040
780
1170
1560
www.adckrone.com/in • INDIA 1800 425 8232
1560
2340
3120
9.13
9. Cable Management Solutions
400836IN
TrueNet® Structured Cabling
Patch Cord Densities
Search
Cable Management Solutions
FiberGuide® Fibre Management System
Express Exit™ Units (For use with 2x6, 4x4, 4x6 and 4x12 systems)
Description
2-inch Express Exit™ Unit
4-inch Express Exit™ base with base cover
4-inch Express Exit™ rear cover kit
Rear cover, 4-inch Express Exit™—4x4 system
Rear cover, 4-inch Express Exit™—4x6 system
Rear cover, 4-inch Express Exit™—4x12 system
Low profile Express Exit™
Product No.
FGS-MEXP-A/B/F
FGS-MEXP-E-A/B/F
FGS-MEXC-E-A/B/F
FGS-MEXC-E-A
FGS-MEXC-E-B
FGS-MEXC-E-F
FGS-MEXP-LP-A/B/F
Express Exits
2x2 Fittings and Junctions
Ordering Information
Description
2x2 horizontal cross with cover
2x2 horizontal tee with cover
2x2 45º horizontal elbow with cover
2x2 90º horizontal elbow with cover
2x2 to 4-inch straight adapter with cover
2x2 end cap kit (includes junction)
2x2 45º up elbow with cover
2x2 45º down elbow with cover
2x2 90º up elbow with cover
2x2 90º down elbow with cover
2x2 junction
Product No.
FGS-MHXP-C
FGS-MHTA-C
FGS-MH4A-C
FGS-MH9A-C
FGS-MDSA-AC
FGS-HMEC-C
FGS-MU4A-C
FGS-MD4A-C
FGS-MU9A-C
FGS-MD9A-C
FGS-MJWR-C
FGS-MHTA-C
•
400836IN
2x2 Straight Section
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Ordering Information
9.14
Ordering Information
Description
6-foot horizontal straight with cover
Product No.
FGS-MSHA-C
FGS-MSHA-C
2x2 Downspout Options
Ordering Information
Description
2x2 standard downspout with cover
2x2 extended downspout with cover
2x2 flex tube attachment with 5-foot length
2-inch flex tube and 2x2 junction
2x2 extended downspout kit with 2-foot length
2-inch flex tube and cover
Dual 7/8 -inch flex tube attachment with
(2) 5-foot lengths flex tube and 2x2 junction
Kit of 107/8 -inch flex tube clamps
Product No.
FGS-MSDS-C
FGS-MDSP-C
FGS-MEX1-C-5F
FGS-KDH2-C
FGS-KT03-C
FGS-HSHC-10
www.adckrone.com/in • INDIA 1800 425 8232
FGS-MSDS-C
Search
Cable Management Solutions
FiberGuide® Fibre Management System
2x2 Direct Support Kits
09/08
•
Description
2x2 ladder rack support kit
2x2 bay top short L bracket kit
2x2 bay top long L bracket kit
2x2 digital cableway support kit
2x2 underfloor support kit
Product No.
FGS-HLR2-C
FGS-BTBS-C
FGS-BTBL-C
FGS-HDCB-C
FGS-HUFB-C
2x2 Direct Support Kits
FGS-HLR2-C
Ordering Information
Description
Aluminum track support (6-feet)
New threaded rod kit (5/8 -inch)
New threaded rod kit (1/2 -inch)
Track connecting bar kit
Ladder rack bracket kit (5/8 -inch)
Threaded rod 12" long
Dual threaded rod bracket kit
Product No.
FGS-HASK-C
FGS-HTR2-5/8
FGS-HTR2-1/2
FGS-HAEJ-C
FGS-HLDR-5/8
FGS-HTHR-5/8-12
FGS-HTUB-2-AB
FGS-HASK-C
2x6 Fittings
Ordering Information
Description
2x6 to 2x2 downspout
2x6 horizontal T
2x6 horizontal cross
2x6 90º horizontal elbow
2x6 90º down elbow
2x6 45º horizontal elbow
2x6 45º up elbow with cover
2x6 45º down elbow
2x6 to 4x4 adapter
2x6 to 4x6 adapter
2x6 trumpet flare
2x6 end cap
2x6 Express Exit
Product No.
FGS-MDSP-G
FGS-MHRT-G
FGS-MHXP-G
FGS-MH9E-G
FGS-MD9E-G
FGS-MH4E-G
FGS-MU4E-G
FGS-MD4E-G
FGS-MDSA-GA
FGS-MDSA-GB
FGS-MTRM-G
FGS-HMEC-G
FGS-MEXP-LP-G
2x6 Straight Section
Ordering Information
Description
2x6 horizontal straight section (6-feet)
2x6 horizontal straight section snap-on cover (6-feet)
2x6 horizontal straight section hinged cover
Product No.
FGS-MSHS-G
FGS-MSSC-B/G
FGS-MSNC-B/G
www.adckrone.com/in • INDIA 1800 425 8232
FGS-MSHS-G
9.15
9. Cable Management Solutions
400836IN
TrueNet® Structured Cabling
Ordering Information
Search
Cable Management Solutions
FiberGuide® Fibre Management System
2x6 Junction
400836IN
•
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Ordering Information
Description
Product No.
2x6 junction
FGS-JUNC-G
FGS-JUNC-G
4x4 Fittings and Junctions
Ordering Information
Description
4x4 downspout
4x4 and 4x6 downspout cover
4x4 extended downspout
4x4 and 4x6 extended downspout cover
4x4 horizontal T
4x4 horizontal T cover
4x4 horizontal cross
4x4 horizontal cross cover
4x4 90º horizontal elbow
4x4 90º horizontal elbow cover
4x4 45º horizontal elbow
4x4 45º horizontal elbow cover
4x4 90º up elbow with cover
4x4 90º down elbow
4x4 90º down elbow cover
4x4 45º up elbow with cover
4x4 45º down elbow
4x4 45º down elbow cover
4x4 to 4x6 straight adapter
4x4 to 4x6 straight adapter cover
4x4 end cap
4x4 snap-fit junction
4x4 cut-in T
Cut-in T fixture
4x4 IFC tie bracket
Product No.
FGS-MDSP-A
FGS-MCDS-AB
FGS-MDSP-EX-A
FGS-MCDS-EX-AB
FGS-MHRT-A
FGS-SHRT-A
FGS-MHXP-A
FGS-SHXP-A
FGS-MH9E-A
FGS-SH9E-A
FGS-MH4E-A
FGS-SH4E-A
FGS-MU9E-A
FGS-MD9E-A
FGS-SD9E-A
FGS-MU4E-A
FGS-MD4E-A
FGS-SD4E-A
FGS-MDSA-AB
FGS-SDSA-AB
FGS-HMEC-A
FGS-MFAW-A
FGS-MHIS-A
FGS-MHIS-JIG-A/B/F
FGS-HIFC-A
FGS-MDSP-A
FGS-MH9E-A
FGS-MFAW-A
4x4 Straight Section
Ordering Information
Description
6-foot horizontal straight section
6-foot horizontal straight section hinged cover
4x4 expandable straight section
6-foot horizontal straight section snap-on cover
9.16
Product No.
FGS-MSHS-A
FGS-MSHC-A
FGS-MVAR-A
FGS-MSSC-A
www.adckrone.com/in • INDIA 1800 425 8232
FGS-MSHS-A
Search
Cable Management Solutions
FiberGuide® Fibre Management System
4x4 and 4x6 Downspout Options
09/08
•
Description
4x4 downspout junction kit
2x2 flex tube attachment with 5-foot length
Product No.
FGS-MJWR-A
FGS-MEX1-C-5F
2-inch flex tube and 2x2 junction
4x4/4x6 downspout insert (adapts to 2x2 system)
FGS-HDSI-AB
4x4 trumpet flare kit
FGS-MTRM-A
4-inch square to 2-inch round adapter with
FGS-ASRI-5F
5-feet flex tubing
4-inch square to 2-inch round adapter with
4-inch square to 2-inch round adapter with
FGS-ASRI-15F
FGS-KT03-A1
length 2-inch flex tubing
4x4 dual flex tube attachment with (2) 5-foot
FGS-MDSP-EX-A
15-feet flex tubing
4x4 single flex tube attachment with (1) 5-foot
FGS-ASRI-10F
10-feet flex tubing
FGS-KT03-A
lengths 2-inch flex tubing
9. Cable Management Solutions
400836IN
TrueNet® Structured Cabling
Ordering Information
2x6, 4x4 and 4x6 Support Kits
Ordering Information
Description
New threaded rod bracket (5/8 -inch)
New threaded rod bracket (1/2 -inch)
Modified new threaded rod bracket (5/8 -inch)
Existing threaded rod bracket (5/8 -inch)
Existing threaded rod bracket (1/2 -inch)
Modified existing threaded rod bracket (5/8 -inch)
Center support bracket (5/8 -inch)
Center support bracket (1/2 -inch)
L bay support bracket
Digital cableway bracket kit (12-inch)
Digital cableway bracket kit (15-inch)
Top support C-bracket
Top support low profile C-bracket
Ladder rack center support bracket kit
Threaded rod, 5/8 -11x12-inch
Threaded rod, 5/8 -11x30-inch
Threaded rod, 5/8 -11x72-inch
Auxiliary framing clip kit 5/8 -11 thread
Auxiliary framing clip kit 1/2 -11 thread
Adjacent angle support bracket 5/8 -11/36-inch
Adjacent angle support bracket 5/8 -11/48-inch
Adjacent angle support bracket 1/2 -13/36-inch
Adjacent angle support bracket 1/2 -13/48-inch
Ladder rack bracket kit (5/8 -inch)
Unistrut nut kit (5/8 -inch)
Product No.
FGS-HNTR-5/8
FGS-HNTR-1/2
FGS-HNTR-5/8-A
FGS-HETR-5/8
FGS-HETR-1/2
FGS-HETR-5/8-A
FGS-HTUB-5/8
FGS-HTUB-1/2
FGS-HLBK
FGS-HCBL-12
FGS-HCBL-15
FGS-HNTS-5/8
FGS-HNTS-5/8-LP
FGS-HNLR-AB
FGS-HTHR-5/8-12
FGS-HTHR-5/8-30
FGS-HTHR-5/8-72
FGS-HFCK-5/8
FGS-HFCK-1/2
FGS-HASB-5/8-36
FGS-HASB-5/8-48
FGS-HASB-1/2-36
FGS-HASB-1/2-48
FGS-HLDR-5/8
FGS-HDGR
www.adckrone.com/in • INDIA 1800 425 8232
FGS-HNTR-XX
9.17
Search
Cable Management Solutions
FiberGuide® Fibre Management System
4x6 Fittings and Junctions
Description
4x6 downspout
4x4/4x6 downspout cover
4x6 extended downspout
4x4/4x6 extended downspout cover
4x6 horizontal T
4x6 horizontal T cover
4x6 horizontal cross
4x6 horizontal cross cover
4x6 90º horizontal elbow
4x6 90º horizontal elbow cover
4x6 45º horizontal elbow
4x6 45º horizontal elbow cover
4x6 45º up elbow with cover
4x6 45º down elbow
4x6 45º down elbow cover
4x6 90º down elbow
4x6 90º down elbow cover
4x6 90º up elbow with cover
4x6 cut-in T
Cut-in T fixture
4x6 trumpet flare kit
4x6 end cap
4x6 snap-fit junction
4x6 IFC tie bracket
Product No.
FGS-MDSP-B
FGS-MCDS-AB
FGS-MDSP-EX-B
FGS-MCDS-EX-AB**
FGS-MHRT-B
FGS-SHRT-B
FGS-MHXP-B
FGS-SHXP-B
FGS-MH9E-B
FGS-SH9E-B
FGS-MH4E-B
FGS-SH4E-B
FGS-MU4E-B
FGS-MD4E-B
FGS-SD4E-B
FGS-MD9E-B
FGS-SD9E-B
FGS-MU9E-B
FGS-MHIS-B
FGS-MHIS-JIG-A/B/F
FGS-MTRM-B
FGS-HMEC-B
FGS-MFAW-B
FGS-HIFC-B
FGS-MDSP-B
FGS-MFAW-B
FGS-MU9E-B
** Dual downspout requires 2 covers
Ordering Information
Description
6-foot horizontal straight section
6-foot horizontal straight section hinged cover
4x6 expandable straight section
6-foot horizontal straight section snap-on cover
Product No.
FGS-MSHS-B
FGS-MSHC-B
FGS-MVAR-B
FGS-MSSC-B/G
•
400836IN
4x6 Straight Section
FGS-MSHS-B
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Ordering Information
9.18
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
FiberGuide® Fibre Management System
4x12 Fittings
Description
4x12 horizontal T
4x12 to 4x6 horizontal T
4x12 horizontal cross
4x12 to 4x6 horizontal cross
4x12 to 4x6 adapter
4x12 90º horizontal elbow
4x12 45º horizontal elbow
4x12 end cap
4x12 cut-in T
Cut-in T fixture
4x12 45º up elbow with cover
4x12 45º down elbow
4x12 90º down elbow
4x12 trumpet flare kit
4x12 downspout with 4x6 exit
4x12 downspout with rear T
4x12 to dual 4x6 adapter
4x12 IFC tie bracket
Product No.
FGS-MHRT-F
FGS-MHRT-F/B
FGS-MHXP-F
FGS-MHXP-B/F
FGS-MDSA-FB
FGS-MH9E-F
FGS-MH4E-F
FGS-HMEC-F
FGS-MHIS-F
FGS-MHIS-JIG-A/B/F
FGS-MU4E-F
FGS-MD4E-F
FGS-MD9E-F
FGS-MTRM-F
FGS-MDSP-F
FGS-MDRT-F
FGS-MDSA-F2B
FGS-HIFC-F
FGS-MH9E-F
Covers are available for 4x12
fittings. Please contact ADC KRONE
or visit www.adckrone.com
4x12 Straight Section
Ordering Information
Description
6-foot horizontal straight section
4x12 expandable straight section
6-foot snap-on cover
Product No.
FGS-MSHS-F
FGS-MVAR-F
FGS-MSSC-F
4x12 (100mm x 300mm) Junction
Ordering Information
Description
4x12 Snap-Fit junction
Product No.
FGS-MFAW-F
09/08
•
400836IN
FGS-MSHS-F
4x12 (100mm x 300mm) System Support Kits
FGS-MFAW-F
Ordering Information
Description
New threaded rod bracket (5/8 -inch)
Existing threaded rod bracket (5/8 -inch)
Top support threaded rod bracket kit
Top support low profile threaded rod bracket kit
Trapeze bracket kit
Ladder rack center support bracket kit
Product No.
FGS-HNTR-F-5/8
FGS-HETR-F-5/8
FGS-HNTS-F-5/8
FGS-HNTS-F-5/8-LP
FGS-HNTP-F-5/8
FGS-HNLR-F
www.adckrone.com/in • INDIA 1800 425 8232
9.19
9. Cable Management Solutions
TrueNet® Structured Cabling
Ordering Information
Search
Cable Management Solutions
FiberGuide® Fibre Management System
Vertical Duct Systems
400836IN
•
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Ordering Information
9.20
Description
2x2 vertical slotted duct kit, 6-feet
2x2 vertical 1.5-inch slotted duct kit, 6-feet
2x2 vertical solid duct
1x2 vertical duct kit
1x2 solid vertical duct kit
2x2 vertical to 1x2 vertical adapter bracket
2x2 vertical slotted duct, 6-feet
2x2 vertical 1.5-inch slotted duct, 6-feet
Cover for 2x2 vertical duct, 6-feet
2x2 vertical duct mounting bracket
4x4 vertical duct kit
4x4 vertical adapter junction kit
4x4 vertical slotted duct, 6-feet
Cover for 4x4 vertical duct, 6-feet
4x4 vertical duct mounting bracket
Product No.
FGS-KTW1-C
FGS-KTW1-CA
FGS-KTW4-C
FGS-KTW1-E
FGS-KTW4-E
FGS-ACC063
FGS-MSHS-C
FGS-MSHS-CA
FGS-MSHC-C
FGS-HWMB-D
FGS-KTW2-D
FGS-MJWR-D
FGS-MSHS-D
FGS-MSHC-D
FGS-HWMB-D
FGS-KTW2-D
Accessories
Ordering Information
Description
Flex Tubing
2-inch outer diameter slotted flex tube, 5-feet
2-inch outer diameter slotted flex tube, 10-feet
2-inch outer diameter slotted flex tube, 15-feet
1-inch outer diameter slotted flex tube, 100-feet
1-inch outer diameter slotted flex tube, 150-feet
1-inch outer diameter slotted flex tube, 200-feet
1-inch outer diameter slotted flex tube, 250-feet
7/8 -inch outer diameter slotted flex tube, 5-feet
7/8 -inch outer diameter slotted flex tube, 10-feet
7/8 -inch outer diameter slotted flex tube, 15-feet
7/8 -inch outer diameter slotted flex tube, 200-feet
Accessories
Hinge kit for 4x4 and 4x6 covers (kit of 1)
Self-closing hinge (kit of 3)
Retainer rings (kit of 10)
Trough cover clip kit
Mitre box and saw
Quick knobs (10)
Quick knobs (100)
Flex tube clamps (kit of 10)
Product No.
FGS-MIDY-5F
FGS-MIDY-10F
FGS-MIDY-15F
FGS-MLDY-100F
FGS-MLDY-150F
FGS-MLDY-200F
FGS-MLDY-250F
FGS-MFTY-5F
FGS-MFTY-10F
FGS-MFTY-15F
FGS-MFTY-200F
FGS-HHGK
FGS-HVHG
FGS-HFRR-10
FGS-KTO9
FGS-MKIT-ABF
FGS-KQKB
FGS-HQKK
FGS-HHEC-10
www.adckrone.com/in • INDIA 1800 425 8232
FGS-MIDY
Search
Cable Management Solutions
Plenum FiberGuide® System
ADC KRONE’s Plenum FiberGuide® System is a fibre
cable raceway system that protects optical fibres,
routed beneath raised computer room floors
and above suspended ceilings. These physical
areas, used to transport environment air, are
typically categorized as plenum air spaces by
National Electric Code (NEC) Standards. In
general, materials used in these spaces must be
non-flammable and must not emit appreciable
amounts of smoke or toxic gases when exposed
to heat or flame.
New Plenum FiberGuide® Express Exits™ allow
jumpers to be permanently or temporarily routed
to the fibre optic terminal (FOT) equipment or
fibre frames. No cutting is required because
knockout sections can be punched out as
necessary.
Figure 1
As seen in Figure 1, the Plenum FiberGuide®
System can be used above a dropped ceiling as
well as below a raised computer floor.
Figure 2 details a layout below a computer
floor. This illustration shows a plenum FiberGuide®
System featuring new Express Exits™.
09/08
•
All plenum components, including
mounting hardware for mounting the
FiberGuide® to the raised floor struts,
are available in the Plenum FiberGuide®
product line.
Figure 2
www.adckrone.com/in • INDIA 1800 425 8232
9.21
9. Cable Management Solutions
Made from sturdy aluminum, ADC KRONE’s
Plenum FiberGuide® System protects optical fibres
by physically separating them from copper
communications cable, power cable, ground
cables, heating/ventilating ducts, water pipes and
many other obstructions commonly encountered
in plenum air spaces.
400836IN
TrueNet® Structured Cabling
System Description
Search
Cable Management Solutions
Plenum FiberGuide® System
New Express Exits™: The Plenum FiberGuide® Express Exit system allows jumpers to be routed in and
out of the system with ease. Express Exits are secured to the sidewall of a FiberGuide® straight section
where needed. No cutting is required because knockout sections allow for quick and easy deployment.
Fittings: Elbows, tees, crosses, trumpet flares and conversions. The fittings are used for changing
direction, converting from one size system to another, adding branch segments and routing the fibres in
and out of the system. Like the straight sections, snap-on covers are also available for the fittings.
Junction kits: Used for aligning and connecting straight sections and fittings. Two components are joined
by inserting them into a junction and pushing them together.
Support kits: Used to support the FiberGuide® system. The short, long, span and diagonal bracket kits
are used for supporting straight sections from round or square tubing.
Flexible tubing: Used in Plenum FiberGuide® systems when the exact layout of the equipment drop
locations is unknown or when frequent equipment relocations are expected. The flexible tubing is two
inches in diameter and attaches to the end of a straight section with an adapter. When the equipment
configuration is known, the flexible tubing is routed to the exact drop location. Other flexible tubing
components include splicing couplers, finishing couplers, mounting straps and additional lengths of
tubing.
Both patch cords and IFC cables may be installed in the Plenum FiberGuide® System. The required two
inch bend radius for patch cords is maintained at all points within the system. IFC cables require the use
of tie-down brackets to maintain the required cable bend radius specified by the cable manufacturer at
the various fittings.
4x6 Horizontal Straight Section with Express Exit Cutouts
2x2, 4x6, and 4x12 Junction Kits
•
400836IN
Straight sections: U-shaped troughs that provide a protective pathway for optical fibres. Straight
sections are usually installed horizontally but may also be installed vertically when a system is mounted
on multiple levels. Straight sections are six feet in length, and covers are also available. The covers snap
into place but can be easily removed for fibre installation.
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
System Description
2x2 Horizontal Straight Section
9.22
4x6 Horizontal Straight Section
4x12 Horizontal Straight Section
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
Plenum FiberGuide® System
Patch Cord Densities
Recommended Density
Single Patch Cords
Recommended
Patch Cord
Density (per in2)
1.7mm
2.0mm
3.0mm
120
90
40
2x2 FiberGuide®
System
Trough
Pile-up
4x6 FiberGuide®
System
1.7mm 2.0mm 3.0mm
4x12 FiberGuide®
System
3.0mm
1.7mm
2-inch
480 360
160
1440 1080 480
2880
2160
3-inch
-
-
-
-
1620 720
4320 3240 1440
4-inch
-
-
-
-
2160 960
5760 4320 1920
1.7mm
2.0mm
2.0mm
9. Cable Management Solutions
TrueNet® Structured Cabling
Recommended capacity takes into consideration random jumper placement into the FiberGuide®
system. Trough capacity refers to the maximum number of fibre jumpers in a given cross-section
of a FiberGuide® installation.
3.0mm
960
Using Lab Manual Set-ups
Pile-up beyond 2 inches is not recommended
Maximum
Patch Cord
Density (per in2)
1.7mm
Patch Cords
2.0mm
Patch Cords
3.0mm
Patch Cords
142
102
44
09/08
•
400836IN
Maximum Density
2x2 FiberGuide®
System
Trough
Pile-up
4x6 FiberGuide®
System
1.7mm 2.0mm 3.0mm
4x12 FiberGuide®
System
1.7mm
2.0mm
3.0mm
528
3408 2448 1056
1836 792
5112 3672 1584
2448 1056
6862 4896 2112
1.7mm
2.0mm
2-inch
568 408
176
1704 1224 3-inch
-
-
-
2556 4-inch
-
-
-
3408 3.0mm
Using GR-449-CORE Bellcore Formula
www.adckrone.com/in • INDIA 1800 425 8232
9.23
Search
Cable Management Solutions
Plenum FiberGuide® System
2x2 System (2"H x 2"W)
Ordering Information
Product No.
Fitting
Snap-on Cover
Number
of Junctions
Straight section
2x2 straight section—length: 6'
PFGF-PSHS-C PFGC-PSHS-C –
Fittings
2x2 horizontal T
2x2 horizontal cross
2x2 90º horizontal elbow
2x2 45º horizontal elbow
2x2 90º up elbow
2x2 90º down elbow
2x2 45º up elbow
2x2 45º down elbow
PFGF-PHRT-C PFGF-PHXP-C PFGF-PH9E-C PFGF-PH4E-C PFGF-PUPE-C PFGF-PDNE-C PFGF-PU4E-C PFGF-PD4E-C PFGC-PHRT-C PFGC-PHXP-C PFGC-PH9E-C PFGC-PH4E-C PFGC-PUPE-C PFGC-PDNE-C PFGC-PU4E-C PFGC-PD4E-C 3
4
2
2
2
2
2
2
Trumpet flares
2x2 trumpet flare—3 sided
2x2 trumpet flare—4 sided
PFGF-PTRM-C PFGF-PFPT-C Conversions
2x2 Plenum to 4x6 Plenum conversion
2x2 Plenum to 4x12 Plenum conversion
PFGF-PDSA-C/B PFGF-PDSA-C/F Junctions
2x2 junction
2x2 end cap—Includes 2x2 junction
PFGF-PJWR-C PFGF-PMEC-C –
–
–
–
PFGC-PDSA-C/B
PFGC-PDSA-C/F
(1) 2x2 (1) 4x6
(1) 2x2 (1) 4x12
– – –
–
•
400836IN
Description
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
The 2x2 Plenum FiberGuide® system interfaces with ADC KRONE’s standard 2x2 FiberGuide® System
and requires no special conversion piece.
9.24
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
Plenum FiberGuide® System
4x6 System (4"H x 6"W)
Product No.
Fitting
Snap-on Cover
Number
of Junctions
Straight section
4x6 straight section—6' long
PFGF-PSHS-B PFGC-PSHS-B –
Fittings
4x6 horizontal T
4x6 horizontal cross
4x6 90º horizontal elbow
4x6 45º horizontal elbow
4x6 90º up elbow
4x6 90º down elbow
4x6 45º up elbow
4x6 45º down elbow
PFGF-PHRT-B PFGF-PHXP-B PFGF-PH9E-B PFGF-PH4E-B PFGF-PUPE-B PFGF-PDNE-B PFGF-PU4E-B PFGF-PD4E-B PFGC-PHRT-B PFGC-PHXP-B PFGC-PH9E-B PFGC-PH4E-B PFGC-PUPE-B
PFGC-PDNE-B
PFGC-PU4E-B PFGC-PD4E-B 3
4
2
2
2
2
2
2
Trumpet flares
4x6 trumpet flare—3 sided
4x6 trumpet flare—4 sided
PFGF-PTRM-B PFGF-PFPT-B – – –
–
PFGF-PPSC-B –
1*
Conversions
4x6 Plenum to 4x6 standard conversion
* One 4x6 Plenum junction kit
required; 4x6 standard junction
is not required
4x6 Plenum to 12" Plenum conversion
Junctions
4x6 junction
4x6 end cap—includes 4x6 junction
PFGF-PDSA-B/F PFGF-PJWR-B PFGF-PMEC-B PFGC-PDSA-B/F
–
–
(1) 4x6, (1) 4x12
–
–
09/08
www.adckrone.com/in • INDIA 1800 425 8232
9.25
9. Cable Management Solutions
Description
•
400836IN
TrueNet® Structured Cabling
Ordering Information
Search
Cable Management Solutions
Plenum FiberGuide® System
4x12 System (4"H x 12"W)
Ordering Information
Product No.
Number
of Junctions
Fitting
Snap-on Cover
Straight section
4x12 straight section—6' long
PFGF-PSHS-F PFGC-PSHS-F Fittings
4x12 horizontal T
4x12 horizontal cross
4x12/4x6 horizontal T
4x12 90º horizontal elbow
4x12 45º horizontal elbow
4x12 90º up elbow
4x12 90º down elbow
4x12 45º up elbow
4x12 45º down elbow
PFGF-PHRT-F PFGF-PHXP-F PFGF-PHRT-F/B PFGF-PH9E-F PFGF-PH4E-F PFGF-PUPE-F PFGF-PDNE-F PFGF-PU4E-F PFGF-PD4E-F PFGC-PHRT-F PFGC-PHXP-F PFGC-PHRT-F/B
PFGC-PH9E-F PFGC-PH4E-F PFGC-PUPE-F PFGC-PDNE-F PFGC-PU4E-F PFGC-PD4E-F Trumpet flares
4x12 trumpet flare—3 sided
4x12 trumpet flare—4 sided
PFGF-PTRM-F PFGF-PFPT-F – – –
–
Junctions
4x12 junction
4x12 end cap—includes 4x12 junction
PFGF-PJWR-F PFGF-PMEC-F – –
–
–
Description
–
3
4
(2) 4x12, (1) 4x6
2
2
2
2
2
2
Accessories (Support Bracket Kits)
Description
Product No.
Short bracket kit
for use with 2x2 and 4x6 sizes; 8.21" overall length
PFGF-SSPT-C/B
Short bracket kit with square U-bolt for easy access mounting
PFGF-EASSPT-C/B
Long bracket kit
for use with 2x2, 4x6, and 4x12 sizes; 18.84" overall length
PFGF-LSPT-C/B/F
Long bracket kit with square U-bolt for easy access mounting
PFGF-EALSPT-C/B/F
Span bracket kit
for use with 2x2, 4x6, and 4x12 sizes; spans 24" center to center floor struts
PFGF-ESPT-C/B/F
Span bracket kit with square U-bolt for easy access mounting
PFGF-EAESPT-C/B/F
Diagonal span bracket kit
for use with 2x2, 4x6, and 4x12 sizes; spans diagonally up to 34" between struts
PFGF-DSPT-C/B/F
Diagonal span bracket kit with square U-bolt for easy access mounting
PFGF-EADSPT-C/B/F
•
400836IN
Ordering Information
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
All support bracket kits fit round support pedestals sizes 0.5" to 1.125".
9.26
www.adckrone.com/in • INDIA 1800 425 8232
Search
Cable Management Solutions
Plenum FiberGuide® System
Accessories (Flexible Tubing)
Ordering Information
Product No.
One hose adapter, with 5' (1.53m) hoses and finishing couplers
PFGF-KT03-C
Two hose adapter, with 5' (1.53m) hoses and finishing couplers
PFGF-KT03-B
Extension tube, 5' (1.53m) long with splice coupler
PFGF-HEXT
Finishing coupler
PFGF-HFIN
Mounting strap
PFGF-HMST
PFGF-HSPL
Flexible tubing, 2" (5.08cm) inner diameter
(X = length in feet: 5, 15, 35, 75, 110, 150)
PFGF-MIDY-XFI
Tie down bracket for IFC
PFGF-PIFC
9. Cable Management Solutions
Splicing coupler
09/08
•
400836IN
TrueNet® Structured Cabling
Description
www.adckrone.com/in • INDIA 1800 425 8232
9.27
400836IN
•
09/08
9. Cable Management Solutions
TrueNet® Structured Cabling
Search
9.28
www.adckrone.com/in • INDIA 1800 425 8232

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project