Product Manual

Product Manual
Product Manual
STATUS: FINAL
VERSION: 1.0
LAST UPDATE: 14/03/2017
Summary
1. Introduction ................................................................................................................. 3
1.1 Welcome ................................................................................................................................................................ 3
1.2 Product DataSheet ............................................................................................................................................... 4
1.3 Operating Instruction ............................................................................................................................................ 5
1.3.1
Certifications ............................................................................................................................................. 5
2. Product Description ..................................................................................................... 6
2.1 High Quality Materials .......................................................................................................................................... 6
2.2 Light Source and Electronics .............................................................................................................................. 7
2.3 Connectors and Power Supply ........................................................................................................................... 8
2.4 Three Layers Optic ............................................................................................................................................... 9
3. Installation ................................................................................................................. 10
3.1 Physical Mounting............................................................................................................................................... 10
3.2 Electrical connection .......................................................................................................................................... 11
3.3 Installation Recommendations .......................................................................................................................... 11
4. Maintenance ............................................................................................................. 12
1. Introduction
1.1 Welcome
Natuled Neptune Pool Light by AGS SpA is the result of years of experience in the
design of innovative lighting systems. It is engineered with superior quality materials,
proven components and breakthrough solutions to deliver impressive outcomes in
terms of light effects, efficiency and protection.
Enjoy the light as you never had before!
This document includes all technical characteristics and features, as well as using
information and installation instructions.
For any other information please visit us on our web site www.natuled.com or contact
our customer service.
Product Manual
AGS SpA
Page 3
1.2 Product DataSheet
Neptune Pool Light comes in four models differing only for the outer flange physical
size and the optic design feature:
MODELS
DISTINCTIVE PARAMETERS
FLANGE SIZE 280mm
NAT_NEP001L
OPTIC DESIGN: MADREPERLA
WEIGHT: 240g
FLANGE SIZE 280mm
NAT_NEP002L
OPTIC DESIGN: FROZEN
WEIGHT: 240g
FLANGE SIZE 320mm
NAT_NEP001XL
OPTIC DESIGN: MADREPERLA
WEIGHT: 250g
FLANGE SIZE 320mm
NAT_NEP002XL
OPTIC DESIGN: FROZEN
WEIGHT: 250g
All other operating parameters are the same for all four models:
COMMON PARAMETERS
VALUE
TYPE OF USAGE
IMMERSION
PROTECTION STANDARD
IP68, IP69-K
LIGHT SOURCE
LED RGB+W
WHITE TEMPERATURE
4000°k
WHITE LUMINANCE
1800 LUMEN
RGB LUMINANCE
1200 LUMEN
TOTAL MAX LUMINANCE
3000 LUMEN
LIGHT DIFFUSION ANGLE
180°
POWER CONSUMPTION
55W (17W White + 38W RGB)
OPERATING VOLTAGE DC
24 VOLT - PWM
LIGHTS CONNECTION CABLE
5 POLES PLUG (R,G,B,W, COMMON)
MATERIAL
INOX Steel - AISI 316
OPTIC FABRIC
DOUBLE TEMPERED GLASS
WALL NICHE DIMENSION
PAR56
Product Manual
AGS SpA
Page 4
1.3 Operating Instruction
Natuled Neptune Pool Light is designed for immersion usage, in swimming pools,
SPAs and other underwater purposes. It fulfills IP68 (permanent immersion) and
IP69K (pressure resistant) protection standards to guarantee durable operating life
and optimal performance.
Do not keep Neptune powered on outside the water for more than 15 to 20
minutes to avoid overheating and possible damages. Misuse may breach
the warranty.
Neptune is meant to be wall mounted within a PAR56 standard niche. The suggested
positioning is 1 to 3 meters from the water surface. Read the installation instruction
chapter for more detailed information.
Neptune is also suitable for use in moderate saline and sulphureous environment
thanks to corrosive resistant AISI316 INOX steel used for the fixture.
Power supply (24V) and PWM light/color control is provided to the Neptune Lamp by
AGS Smart Light Platform (SLP) controller. SLP product includes a Hardware device
and a mobile Software App specifically designed for Natuled LED lights product line
control. SLP offers advanced controlling features such as:

Setup a color or a white light of your choice;

Setup a color program, like Chromotherapy, Fireplace or Strobo;

Save custom colors and programs

Setup timers for turning light and programs on and off.
For a complete description of SLP features please read the SLP product manual.
When used with one or more Neptune lights, SLP must mandatory be
powered by a protected SELV category power supply provided by AGS as
part of the Natuled product line offering. Using a different Power Supply
and/or using a different controlling unit will breach the warranty.
1.3.1 Certifications
EN60598-1, EN60598-2-1, EN60598-2-22, EN62471
Product Manual
AGS SpA
Page 5
2. Product Description
1. Light Pot: Lamp rear body and container of the electronics
2. Printed Circuit: the electronic card mounting White and RGB LEDs
3. Water proof Gasket
4. Outer Flange
5. Three layers optic
2.1 High Quality Materials
The Neptune Pool Light is made only of high quality material to ensure maximum
performance and product life cycle:

The whole headlight body and even all the fixing bolts are made of stainless
steel AISI-316 to prevent corrosion when used in saline waters.

The flange and the external side of the pot are also subject to mirror polishing
to furtherly improve resilience to corrosive agents.
Product Manual
AGS SpA
Page 6

The Electronic Card (Printed Circuit) is insulated with a specific resin put in
direct contact with the pot metal to allow improved thermal dissipation, and thus
avoiding the use of extra cooling fins.

The Neptune Pool Light is adherent to IP68 and IP69K protection standards,
thanks to the use of a special certified gasket that guarantees water-proof
operation when immersed in water and subject to high pressure. The fixture
also uses a specific electrical connector, described in the next paragraph,
IP69K certified.
2.2 Light Source and Electronics
The electronic card mounts a total of 196 LEDs RGB+W, (124 RGB and 72 White)
with a special radial layout studied to yield a high intensity light of 3000 lumens with a
total power consumption of 58W at the maximum intensity.

White LEDs produce up to 1800 Lumen at about 4000°K Temperature, and a
power consumption of 24W at max intensity;

RGB LEDs produce up to 1200 Lumen, and a power consumption of 35W at
max intensity;
Product Manual
PARAMETER
VALUE
LIGHT SOURCE
196 LEDs (124RGB, 72W)
WHITE TEMPERATURE
4000°k
WHITE LUMINANCE
1800 LUM
RGB LUMINANCE
1200 LUM
LIGHT DIFFUSION ANGLE
180°
POWER CONSUMPTION
55W (17W White + 38W RGB)
LIGHTS CONNECTION CABLE
24 VOLT – PWM 1KHz
LIGHTS CONNECTION CABLE
5 POLES PLUG (R,G,B,W, COMMON)
CRI WHITE
80
EFFICIENCY WHITE
122lm/W
EFFICIENCY RED
54lm/W
EFFICIENCY GREEN
79lm/W
EFFICIENCY BLUE
22lm/W
POWER CONNECTOR DC
16A, 150V
AGS SpA
Page 7
2.3 Connectors and Power Supply
Water proof IP69K special electrical connectors are used to connect the card. The
female plug is solded to the card and fixed to the light body.
The male plug have to be joint to a 5-poles cable,that has to connect the Lamp to the
Natuled Smart Light Platform (SLP), the controller needed to operate any Natuled
Light.
Male and Female plugs are provided with the Neptune Pool Light

Female plug – Souriau UTS6JC14E5S

Male plug – Souriau UTS714D5P32
The 5-poles cable can be ordered to AGS or purchased separately
Natuled Neptune Pool Light must only be used with a Smart Light Platform
controller powered by one or more SELV category Power Supply.
Product Manual
AGS SpA
Page 8
2.4 Three Layers Optic
The Neptune Pool Light offers a high light
diffusion effect thanks to its three layers optic
feature.
This is obtained with an original design
polycarbonate disc located between two
glasses: one of 3mm (external double
tempered glass) and the other of 1.2mm
(internal glass).
Tests made in our lab show that Neptune
lamp keeps a 100% illuminance flux up to a
120° angle, dropping to 90% illuminance at a
150° angle, and still keeping an impressive
50% illuminance at a 180° angle.
Product Manual
AGS SpA
Page 9
3. Installation
Installation of the Neptune Pool Light is done in a pool wall recess hosting a standard
PAR56 niche. The niche must have a minimum depth of 20cm to easily host the
connector and the cable.
3.1 Physical Mounting
The Neptune Pool Light can be securely fixed
into the niche without using screws, thanks to
four mounting brackets with rubber terminals
mounted to the rear of the light body.
Insert the four brackets tips inside the niche
border and then push the lamp completely inside
the niche as much as possible, until it steadily
stick to it, and the outer flange get in touch with
the pool wall.
However the Lamp border will not sealed to the niche, so as to allow water to circulate
freely around the light body, inside the niche to ensure optimal heat dissipation.
To extract the lamp from niche grab it by the flange and just pull it out.
Product Manual
AGS SpA
Page 10
The Neptune Lamp must permanently operate in complete immersion under water at
a suggested depth of 1 to 3 meters.
1-3 m
3.2 Electrical connection
When wiring the pool, make sure to leave enough
free cable inside the niche to allow plugging and
unplugging the lamp outside the water for installation
and maintenance.
Although the Neptune lamp comes with a certified
water resistant plug, it is absolutely recommended to
disconnect the power before doing any installation or
maintenance operation to avoid electrical hazard.
3.3 Installation Recommendations


The controller unit (SLP) driving the Lamp should be placed in a dry
environment at least 5 meters off the pool wet area.
The controller must be powered by a protected SELV power supply, to avoid
shock hazard
Product Manual
AGS SpA
Page 11
4. Maintenance
A periodical onsite inspection and maintenance should be performed to the Neptune
Pool Light installation, with the following purposes:

Periodically clean the units to prevent the accumulation of dirt inside the niche

Verify the integrity of the cables and plugs. If the cable or the plug are damaged
replace them as soon as possible.

Check that no condense appears on the glass within the lamp, which could
indicate a water leakage.

Check the integrity of the external glass.
In case of fault (Light not working) or any external damage to the light body, call your
reseller’s support for help. Qualified personnel will analyse the issue and if possible
will replace damaged parts with original spare parts.
If the problem cannot be solved onsite the lamp shall be replaced.
In any case, if the appliance is under valid warranty spare parts or a new lamp will be
shipped and replaced for free.
Periodic onsite inspection is not covered by AGS warranty. Any repair intervention
that may arise from inspection may be covered by warranty if required conditions
apply.
Please read AGS Natuled Warranty document for information.
Product Manual
AGS SpA
Page 12
AGS S.p.A. reserves the right of changing the content of this document without any notice. The use of this
document is restricted to recipients authorized by AGS S.p.A.
Unauthorized use, reproduction and distribution is strictly prohibited and may be prosecuted by law.
All trade names and logos contained herein are trademarks registered by AGS S.p.A.
Product Manual
AGS SpA
Page 13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising