MSR100 - LCD Vision
POWERED
SPEAKER
MSR100
Compact in size but big in sound and versatile features, the MSR100
packs a powerful sonic punch — making it ideal for a wide range of
applications and almost anywhere in your stage setup.
All-in-one sound solution — powerful, versatile, reliable
All-around performer
The MSR100 fills many sound reinforcement and stage monitor needs in one inexpensive, lightweight package. As a mixer,
power amplifier, and speaker system combined in a single, compact unit, it's perfect for
small events and club gigs. Mix in a CD player, rhythm machine and/or keyboard with
your voice — all without the need of a separate mixer or power amplifier. And since it's
made by Yamaha, the MSR100 provides the
high-quality performance you need with
exceptional ease-of-use and reliability.
High power, great sound
The 100-watt power amplifier built into the
MSR100 delivers plenty of output, ensuring
that you'll be heard with full dynamic range
and clarity. This specially designed amplifier has been optimized for use with the
speaker section of the MSR100 to give you
the absolute clearest and cleanest sound
possible.
An 8” custom woofer handles the low end,
while a 1” pure titanium diaphragm compression driver delivers the high frequencies.
The horn of the MSR100 provides a wide
90°X40° sound dispersion for optimum audience coverage.
output. Two-band EQ — high and low —
gives you further control over the final sound.
A convenient CLIP indicator alerts you when
the input signal is too high, letting you avoid
distortion. For larger events, the MSR100’s
special LINK OUT jack can be used to connect multiple units and expand your sound
coverage.
Flexible placement options
455.5 (18.22")
137
120 (4.8")
255 (10.2")
(5.48")
275 (11")
2-M8x25
EQ
LOW
HIGH
MASTER
LEVEL
P.AMP
NW
HF
SUM
INPUT3
(-10dB)
LINK OUT
(-10dB)
Mic
S112IV
Power
amplifier
Acoustic
Electric
Guitar
MIXER
MSR100
CD Player
GENERAL –––———————————————————
Type
2-way Bass Reflex Powered Speaker
Components
LF: 8" Cone
HF: 1" Compression Driver
Frequency Response 55Hz~20kHz (-10dB)
Maximum SPL
112dB (1m)
Dispersion
90° (H) / 40° (V)
Dimensions
275x455.5x255mm
(WxHxD)
(10-13/16"x17-15/16"x10-1/25")
Weight
11kg (24.2lbs)
INPUT1
(-50/+4dB)
INPUT2
(-10dB)
Convenient monitoring system in larger setups
SPECIFICATIONS
BLOCK DIAGRAM
LOW
CUT
MSR100
Portable
keyboard
unit: mm (inch)
A simple but effective mixer built into the
rear of each unit provides 3 inputs with master EQ for precise sound control. The input 1
XLR connector accommodates almost any
microphone or line input (with a -50dB/+4dB
pad switch), while line sources can be connected by phone jack to the input 2 and input
3 connectors. This makes the MSR100 perfect for small events and club gigs.
Naturally, each input has its own level control, with a Master Level control for overall
LOW
BOOST
MIXER
REAR PANEL
Versatile mixer and connections
+4 dB
-50dB
Compact, yet powerful stereo PA system
Mic
The MSR100 is compact, lightweight, and
ready to go anywhere you go. Besides a
built-in handle, its distinctive design lets you
stand the unit upright for conventional sound
reinforcement, or lay it on its angled side for
use as a floor monitor.
The MSR100 is as rugged as it is versatile,
with a durable polypropylene enclosure that
stands up to the rigors of the road. A variety
of mounting options also let you place it on a
pole, suspend it from the ceiling, attach it to a
wall, or even safely stack multiple units on
the floor.
DIMENSIONS
All-in-one features and versatile connections —
for any application or setup
LF
AMPLIFIER SECTION ————————————————
Maximum Output Power
100W at 1kHz. THD=1%, RL=6Ω
Crossover Frequency 4kHz
Input Sensitivity INPUT 1: -50dB*/+4dB* (with select SW)
INPUT 2 & 3: -10dB*
Input Impedance LINE 1 & 2 & 3: 10kΩ
Link Out
-10dB*/ 10kΩ
Controls
Level Control INPUT 1 & 2 & 3, Master Level
EQ LOW: ±3dB at 60Hz, HIGH: ±6dB at 10kHz
Power Switch
ON / OFF
Connectors
INPUT 1:
XLR-3-31 (balanced)
INPUT 2&3: Phone (unbalanced)
LINK OUT: Phone (unbalanced)
Indicator
Green LED: Power on, Red LED: Clip
Power Requirements US & Canadian Models: AC120V 60Hz
European Models: AC230V 50Hz
AT Models: AC240V 50Hz
Power Consumption US & Canadian Models: 70W
European Models: 70W
AT Models: 70W
Optional Accessories Wall Bracket: BWS50-260/320
Ceiling Bracket: BCS251
Baton Bracket: BBS251
Speaker Stand: STS-50
*0dB=0.775V
Specifications and appearances are Subject to change without notice.
http://www.yamaha.co.jp/english/
http://www.yamaha.co.jp/product/proaudio/homeenglish/
‘KANDO’ …Inspiring the Heart and Spirit.
This document is printed on chlorine-free (ECF) paper with soy ink.
LPA470 Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising