Installation Instruction IPS Video Analytics for Axis ACAP

Installation Instruction IPS Video Analytics for Axis ACAP
Installation Instruction
IPS Video Analytics for Axis ACAP Cameras and Encoders
Contents
1
Axis camera configuration ............................................................................................................. 2
1.1
1.2
IP configuration .......................................................................................................................... 2
Setting up date and time ............................................................................................................ 4
2
Installing an IPS Analytics Application .......................................................................................... 5
3
Licensing an IPS Analytics Application ......................................................................................... 6
3.1
Automatic (online) licensing........................................................................................................ 6
3.2
Manual (offline) licensing............................................................................................................ 8
3.2.1
Requesting a licence key file ............................................................................................... 8
3.2.2
Licensing the analytics application in the camera or encoder ............................................. 10
4
Updating ........................................................................................................................................ 13
1 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
1 Axis camera configuration
1.1
IP configuration
The IP configuration procedure described below assigns a fixed IP address to the camera.
Note: There are two ways to access the TCP/IP Settings dialog. They are:
Setup | Basic Setup | TCP / IP
Setup | System Options | Network | TCP/IP | Basic
The second access option is used in the following description.
1. Open the camera’s website.
2. Select Setup | System Options | Network | TCP/IP | Basic.
3. Enter the IP address and the subnet mask.
4. Enter the address of your router in the Default router field.
5. Click the Save button.
2 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
6. Enter the address of a DNS server (e.g. 8.8.8.8) in the Primary DNS server field under Setup |
System Options | Network | TCP/IP | Advanced.
7. Click the Save button.
3 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
1.2
Setting up date and time
1. Select Setup | System Options | Date & Time.
2. Select the appropriate Time zone.
3. Select the Time mode.
4. Click the Save button.
4 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
2 Installing an IPS Analytics Application
IPS gives you a licence code and access data for downloading the application file from the IPS web site.
Download the application file.
Use the following procedure to load the application file into the camera:
1. Connect the camera to the PC running the browser (Microsoft Internet Explorer or Mozilla Firefox) you intend to use to load the application file into the camera.
2. Launch the browser and open the camera’s website.
3. Click on Setup.
4. Select Applications.
5. Select Packages.
6. Click the Browse… button.
7. Select the folder where you saved the application file (e.g. in a USB stick) and select the file.
8. Click the Upload Package button.
9. Wait until the application appears in the Installed Applications list.
Attention: Do not click Start until you have licensed the application.
5 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
3 Licensing an IPS Analytics Application
If your camera or encoder has Internet access you may choose automatic licensing, if not you have to
use manual licensing.
Important note: Due to the Axis licensing procedure a licence generated using automatic licensing cannot be used any longer after an application or firmware update. Therefore manual licensing is strongly
recommended.
3.1
Automatic (online) licensing
If the camera in which you wish to license the analytics application has Internet access, you can license it
automatically. Use the following procedure:
1. Open the camera’s website.
2. Enter the address of your router in the Default router field under Setup | System Options |
Network | TCP/IP | Basic.
3. Click the Save button.
4. Enter the address of the DNS server (e.g. 8.8.8.8) in the Primary DNS server field under Setup |
System Options | Network | TCP/IP | Advanced.
5. Click the Save button.
6. Select Setup | Applications | <application name> | License.
Replace <application name> by the name of the analytics application installed on your camera
or encoder.
7. Enter the licence code (that you received from Securiton by e-mail) in the License code field of
the Automatic installation pane.
8. Enter the customer information.
9. Click the Install button.
6 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
10. Select Applications | Packages and <application name>.
Replace <application name> by the name of the analytics application installed on your camera
or encoder.
11. Click the Start button.
7 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
3.2
Manual (offline) licensing
3.2.1
Requesting a licence key file
The application must be licensed before you use it in the camera.
Use the following procedure:
1. Locate the serial number of the device (camera or encoder) on its website (under Setup | Basic
Setup | Instructions). The serial number equals the MAC address without the colons.
The licence code you received from Securiton by e-mail should be at hand.
2. Open the Axis website (www.axis.com).
3. Select Camera applications on the home page.
4. Click License key registration.
5. In the Application field select Use License Code:
6. Enter the license code and the serial number, and then click Proceed.
8 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
7. Enter the requested information. Note: required fields are marked by a red asterisk.
8. Click the Confirm button.
9 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
9. Click the download link for the licence key file.
10. Save the licence key file.
3.2.2
Licensing the analytics application in the camera or encoder
Use the following procedure to license the analytics application in the camera or encoder:
1. Open the camera’s website.
2. Select Setup | Applications | <application name> | License.
Replace <application name> by the name of the analytics application installed on your camera
or encoder.
3. Click the Browse… button.
4. Select the licence key file.
5. Click the Install button.
10 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
11 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
6. Select Applications | Packages and <application name>.
Replace <application name> by the name of the analytics application installed on your camera
or encoder.
7. Click the Start button.
12 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
4 Updating
For updates of the analytics application the following rules apply:
An update is only possible if the licensing has been made using Manual (offline) licensing.
A new minor version may be licensed with the same licence key file as the previous version.
For a new major version a new licence must be purchased.
Important note: If you update the analytics application, the configuration data is lost.
Use the following procedure to update an IPS Analytics Application:
1. Open the camera’s website.
2. Select Setup | Applications | Packages and under Installed Applications select <application
name>.
3. Click the Stop button.
4. Click the Remove button.
5. Load the new version of the application as described under Installing an IPS Analytics Application.
6. License the new version as described under Licensing the analytics application in the camera
or encoder in the chapter Manual (offline) licensing.
7. Configure the analytics application.
Copyright
2012 Securiton GmbH. IPS and the IPS logo are registered trademarks of Securiton GmbH.
Securiton GmbH has included the information contained in this manual to the best of its knowledge. Content of this documentat ion
exclusively serves information purposes and may be changed without prior notice. Securiton GmbH accepts no responsibility for
damage or accidents, which occur as a consequence of information, which has been given regarding devices or components not
manufactured by itself. Securiton GmbH accepts no responsibility for changes or modifications, which have not been explicitly
authorised by Securiton GmbH.
13 / 13 | 07/12/12 | V3.21 R01
A Business Unit of Securiton GmbH
IPS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising