E Series *TD-000525-00*

E Series *TD-000525-00*
E Series
Quick Start Guide
Input Configuration
E Series two-way loudspeakers and subwoofers are designed for externally powered operation. Pass-throughs permit connection to multiple loudspeakers. The
two-way models feature internal passive crossovers for full-range operation. To use them with subwoofers, use an active crossover and separate amplification to
split the subwoofer frequencies and the remainder of the audio spectrum.
PLD and GXD Series amplifiers have E Series voicings available in their presets and loudspeaker profiles. TouchMix digital mixers also have E Series voicings
available, for use in systems that don't have PLD or GXD Series amplifiers.
E Series E10, E12, E15 Block Diagram and Input Plate
1
1
2
2
85
1
1
2
2
HPF
HF
LPF
LF
— Figure 1 —
E Series E18sw Block Diagram and Input Plate
1
1
2
2
NL4
1
1
2
2
NL4
4
Barrier
Strip
— Figure 2 —
TD-000525-00-B
*TD-000525-00*
LF
Connections
Full Range Stereo System
NL4
Amplifier
1
1
2
2
1
1
2
2
NL4
Speaker
GXD Series power amplifier preset:
GXD Preset
ST SAT FULLRANGE
R
Input
L
NL4
Amplifier
P6 ST E10 (stereo E10)
P10 ST E12 (stereo E12)
P12 ST E12 DANCE (stereo E12 dance)
P14 ST E15 (stereo E15)
P16 ST E15 DANCE (stereo E15 dance)
1
1
2
2
1
1
2
2
NL4
Speaker
— Figure 3 —
Single Channel, Sub / Satellite Option 1
NL4
Amplifier
Input
1
1
2
2
NL4
Amplifier
1
1
2
2
1
1
2
2
1
1
2
2
GXD Series power amplifier preset:
GXD
P3 Preset
SUB SAT 80HZ
SUB SAT nn HZ
— Figure 4 —
TD-000525-00-B
NL4
Speaker
2
NL4
Speaker
Single Channel, Sub / Satellite Option 2
NL4
Amplifier
1
1
2
2
1
1
2
2
NL4
Speaker
Cross-wired 1 - 2, 2 - 1
GXD Preset
SUB SAT nn HZ
Input
GXD Series power amplifier preset:
P3 SUB SAT 80HZ
NL4
Amplifier
1
1
2
2
1
1
2
2
NL4
Speaker
— Figure 5 —
Dual Channel, Sub / Satellite System
GXD Series power amplifier preset:
To Right
Satellite GXD Preset
ST SAT nn HZ
R
Input
L
P7 ST E10 + SUB
P8 ST E10 DANCE + SUB
P11 ST E12 + SUB
P12 ST E12 DANCE + SUB
P15 ST E15 + SUB
P17 ST E15 DANCE + SUB
1
NL4
1
Amplifier 2
2
To Left
Satellite
1
1
2
2
NL4
Speaker
To Right
Subwoofer
GXD Preset
ST SUB nn HZ
GXD Series power
amplifier preset:
P18 ST E18 SUBS
To Left
Subwoofer
NL4
Amplifier
1
1
2
2
1
1
2
2
— Figure 6 —
TD-000525-00-B
3
NL4
Speaker
Dual Channel, Sub / Satellite System with 4-channel PLD
PLD Series power amplifier
preset:
F11 Dual bi-amp mode
PLD Series power amplifier
loudspeaker profiles:
CH A • E18sw
CH B
•
•
•
•
•
CH C
• E18sw
E10 +SUB
E12 +SUB
E12 dance +SUB
E15 +SUB
E15 dance +SUB
CH D • E10 +SUB
•
•
•
•
E12 +SUB
E12 dance +SUB
E15 +SUB
E15 dance +SUB
— Figure 7 —
TD-000525-00-B
4
Pole Mounting
The E Series loudspeakers (E10, E12, E15) can be mounted above the E18
subwoofer using the 24-inch pole included with the subwoofer.
WARNING!: This pole, if used inappropriately, may
result in the loudspeaker system being top-heavy and
hazardous. Ensure that your system will resist tipping
and that it sits on a solid, level surface.
WARNING!: Always use two persons to lift the
loudspeaker onto the pole.
Do not move a subwoofer if a loudspeaker and pole are
mounted on it.
Refer to — Figure 8
1. Place the E18 subwoofer (1) on a solid level surface positioned where you
want to use it.
2. Screw the threaded end of the 24-inch mounting pole (3) clockwise into the
pole-mounting bracket (2) on top of the subwoofer. Hand tighten only.
3. Select one of the two pole mount cups on the E Series loudspeaker:
• The rear cup (4) has no tilt.
• The front cup (5) gives a downward tilt of 10°.
4. Carefully place the loudspeaker onto the pole.
Installation Options
The following options require purchasing an accessory kit designed for the
E Series loudspeakers.
Yoke Mounting the Loudspeakers
A yoke accessory allows the E10, E12, or E15 to be mounted on a surface, such
as a wall or ceiling. The E18 subwoofer cannot be yoke-mounted. Each model
has a corresponding yoke accessory kit:
• E10 Yoke Accessory Kit E10 Yoke
• E12 Yoke Accessory Kit E12 Yoke
• E15 Yoke Accessory Kit E15 Yoke
— Figure 8 —
Suspending the Loudspeakers
The E10, E12, and E15 can be suspended using the M8 Suspension Kit M8 KIT A. The E18 Subwoofer cannot be suspended.
Subwoofer Caster Kit FG-000972-00
Optional casters are available to install on the subwoofer to make it more mobile, ideal for use in portable sound systems.
TD-000525-00-B
5
Mailing Address:
QSC, LLC
1675 MacArthur Boulevard
Costa Mesa, CA 92626-1468 USA
Telephone Numbers:
Main Number: +1 (714) 754-6175
Sales & Marketing: +1 (714) 957-7100 or toll free (USA only) (800) 854-4079
Customer Service: +1 (714) 957-7150 or toll free (USA only) (800) 772-2834
Facsimile Numbers:
Sales & Marketing FAX: +1 (714) 754-6174
Customer Service FAX: +1 (714) 754-6173
World Wide Web:
www.qsc.com
E-mail:
info@qsc.com
service@qsc.com
tech_support@qsc.com
© 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and
Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com.
TD-000525-00-B
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising