CW532-5-833L

rev.2.0 18.11.15
CW532-5-833L
•
•
•
•
•
•
Green DPSS Line Laser Module
532 nm, <5 mW
60° Fan Angle
Automatic Power Control
3 VDC Input Voltage
IR Filter
Description
CW532-5-833L is a small size diode pumped solid state (DPSS) Nd:YVO4+KTP line laser module with a 60° line generating lens,
emitting at a wavelength of 532 nm, and an optical output power of <5 mW. It features automatic power control (APC) driving
electronics for stable operation, an IR filter to block residue IR radiation, and is designed for 3 VDC supply voltage. A matching
power supply is optionally available for quick setup (see page 3 for details).
Maximum Ratings (T
CASE
= 25°C)
Min.
Values
Max.
Operating temperature
+ 15
+ 30
°C
Storage temperature
- 20
+ 80
°C
Parameter
Unit
Electro-Optical Characteristics (T
Parameter
Peak Wavelength
CASE =
25°C)
Min.
Values
Typ.
Max.
531
532
533
nm
5
mW
Radiated Power
Beam diameter at aperture
1.5
Fan angle*
60
Transverse mode
Unit
mm
deg.
TEM00
Warm up time
<3
s
Beam divergence
1.2
mrad
Operating Current
Supply Voltage
200
2.2
mA
3
3.2
Body
brass
Collimating lens
acryl
2” cylinder lens, glass
Line generating lens
Ø 8 x 35 (53)
Dimensions
Leads
MTTF
VDC
mm
2 x 10 cm, 26 AWG PVC-Free
3000
h
* Fan angles of 45° and 120° are available on request
www.roithner-laser.com
1
11.0
Ø4.0
Ø8.0
Outline Dimensions
35.0
18.0
all dimensions in mm
Electrical Connection
Lead
Red
Black
Description
+VDC
GND
Precautions
Static Electricity:
Precautions against electrostatic discharge (ESD) must be taken when handling or operating the module. Surge
voltage or electrostatic discharge can result in complete failure of the laser diode.
Heat Sinking:
In order to maintain lifetime and stability of the laser diode it is essential to provide efficient heat management. For long
time stable operation proper contact between laser module and heat sink is mandatory.
Safety:
This laser module emits highly concentrated visible light which can be hazardous to the human eye and skin. It is
classified as CLASS 3R laser product according to IEC 60825-1 and 21 CFR Part 1040.10 Safety Standards. Actual
laser light emitted and precautions necessary strongly depend on mode of operation.
www.roithner-laser.com
2
Accessories
Laser Power Supply LPS31
•
•
•
•
•
•
110-230 VAC universal input voltage
Small ripple (<80 mV)
AC Europlug (CEE7/16)
ON/OFF switch
IEC 60130-10 Type A connector
Output 3 VDC, max. 1 A
© All Rights Reserved
The above specifications are for reference purpose only and subjected to change without prior notice
www.roithner-laser.com
3

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project