DF-EX2700P Instructions
DF-EX2700P Instructions
Operation panel Figure
Interface Description 1
12V:Power Input
Interface Description 2
B:RS485 interface
G:Common ground
C:Control common line
I:IRIS control line
A:RS485 interface
ALARM:Alarm Output
GND:Common ground
F:FOCUS control line
XIR:Night Vision synchronization input
Z:ZOOM control line
TOUT: RS232 interface
RIN: RS232 interface
Key Description
*** XXX key functions for the operating status ,XXX is the menu key function status
FAR
UP.................Focus far / up to select the menu
NEAR DOWN..........Focus Near / down to select the menu
ICR
MENU...........Manual night type /MENU
WIDE LEFT..............Zoom away / impairment adjustment
TELE RIGHT..........Zoom Near / value adjustments
MENU ICR................Open / Close menu / manual night vision
Procedure Description
1:When powered on, press and hold the MENU button for about 2 seconds to enter
the menu settings, the screen displays the menu options; If you press the MENU
button again for about 2 seconds to exit the menu and display.Click the MENU button
to set the menu state, when a menu item with the "!" "ADJ" or "number or the letter"
option, you can adjust the parameters for this menu item by LEFT and RIGHT keys.
2: Press the UP and DOWN keys to select the menu.
3:When FREEZE = EN or ON, press the MENU button to freeze or unfreeze the
image in the menu state.
4:When A.NIGHT = OFF, the circumstances under close the menu, press the MENU
button to manually turn on or off the night vision shortcuts.
5:When WB MODE = white balance correction, click the MENU button to trigger the
white balance correction.
6:When the zoom to the appropriate location, open the menu and then close the menu
when users see the display:? SAVE when YES-W/NO-T flashes, if you need to save
settings Press WIDE button, if the user does not need to save the settings can be
TELE key. Save time before other operations after 5 seconds.
7:When using infrared light or white reflective object too strongly, external
synchronous infrared control XIR-IN interface allows the camcorder to an external
infrared lights genlock. (At this point the camera menu A.INGHT set XIR-IN)
8:When using the automatic night vision function, set the menu items in the aperture,
shutter and other settings become automatic, automatic night vision is not normal if
you find the time, do the menu item A4 items to the factory default settings.
9:DEFAULT when the user operates the menu, click the MENU key to enter a key to
recovery, after the operation is complete exit the menu and save the settings.
Remote Control
1.Remote control connection:The back end of the six-pin socket camera DC12V
marked by the decoder output port, GND, COM, Z, F, I. correspondence connection
2.Remote menu functions operating instructions:Use PC video card monitoring
software control, iris + mouse click and hold long shell open and close the menu.
After entering the menu and click IRIS + can set the menu options. Click Focus (FAR
or NEAR) up or down to select the menu. When you click when the selected aperture
+ to manually adjust the distance zoom shell click the parameter value of any items.
After exiting the menu, when the menu is set to manual focus Focus shell Click
artificially manual focus. When the aperture is set to manual, click on IRIS +, parameters manually adjust the iris aperture manually press night vision conversion.
When people like the opportunity to manually night vision night vision function
automatically to manual states. As promised automatic night vision need to re-set the
menu.
OSD MENU
1: CAM:ID----------OFF/000
Camera ID: OFF/SET/ON
Press the MENU butt on for about 2 seconds to enter the menu settings, press UP or
DOWN to select menu items,click MENU can be set OFF / SET / ON.Set a digital
display, press LEFT or RIGHT ID number can be set (000-999). Note that when you
set down selection menu ID can not be adjusted to OFF / ON mode must be
completed using the MENU key to set the desired user ID again, and then UP or
DOWN button to select the other menus.In any menu settings, the user can press the
MENU button to exit the menu settings, the system will automatically prompt to save
the settings and exit the menu. When this item is set as OFF, the screen will exit the
menu without any ID code display, such as a user ID code needed to display, set this
item is set to ON and then quit, the user ID you set will be displayed in the lower right
corner of the screen, for the user to identify the camera.This function is used when
installing multiple simultaneous users machine, allows easy identification of signal
sources; If users install only a single camera, it is recommended not to use this
feature, so to cover part of the image.
2: FOCUS------------AUTO/MANUAL
Enter the menu, click the MENU select the menu state. Open the manual focus setting
MANUAL; press LEFT / RIGHT manual focus mode, set the AUTO open autofocus.
There NEAR, FAR key after set MANUAL, exit the menu, manual focusing directly.
In ATW press NEAR / FAR key to manual focus, press the TELE / WIDE into auto
focus.
3: SHUTTER---------AUTO/MANUAL
Enter the menu, click the MENU Settings AUTO / MANUAL. MANUAL set to open
the shutter manually, press LEFT / RIGHT to manually adjust the shutter value. The
larger the value, the shorter the exposure time, the darker the image, the more noise.
AUTO manually set the shutter closes, enter the automatic shutter mode.
4: IRIS-----------------AUTO/MANUAL
Enter the menu, click the MENU Settings AUTO / MANUAL. MANUAL opened
manually set the aperture, press LEFT / RIGHT to manually adjust the aperture value.
When the larger the value, the smaller the amount of light, the darker the image.
AUTO manual iris setting off into the auto iris mode.
5: BRIGHT------------AUTO/MANUAL
Enter the menu, click the MENU can be set to AUTO or MANUAL. When set to
MANUAL press RIGHT or LEFT to adjust the value (when adjusting brightness,
exposure, gain, with a corresponding change).
6: GAIN----------------AUTO/MANUAL
Select this option and enter the menu, click the MENU button can be set to AUTO or
MANUAL mode. When set to MANUAL mode, press LEFT or RIGHT buttons to
adjust the value.
7: SHARP--------------AUTO/MANUAL
Select this option and enter the menu, click the MENU button can be set to AUTO or
MANUAL mode. When set to MANUAL mode, press LEFT or RIGHT buttons to
adjust the image edge sharpness. Black and white mode when the effect would be
more significant.
8:WB MODE---------AUTO/INDOOR/OUTDOOR/REVISE/ATW/R.GAIN/B.GAIN
Enter the menu, press LEFT / RIGHT to select six kinds of white balance modes:
AUTO---------Auto white balance (no character display)
INDOOR------Indoor white balance (bulb symbol is displayed)
OUTDOOR---Outdoor white balance (sun symbol logo)
REVISE-------White balance correction (symbols displayed on the standard)
ATW-----------Automatically trigger tracking (Show ATW)
WB-MAN-----Manual white balance (Show WB-MAN)
When setting the white balance manually enter: R.GAIN, B.GAIN, press LEFT or
RIGHT to adjust the red, blue gain.
R.GAIN--------Red Gain
When the white balance mode is set to manual mode, the red display ADJ adjustable
gain character, press LEFT or RIGHT to adjust the red gain, failure to display DIS
characters
B.GAIN--------Blue Gain
When the white balance mode is set to manual mode, adjust the blue gain ADJ
character display, press LEFT or RIGHT to adjust the blue gain, failure to display DIS
characters
9: A.NIGHT------------ON/OFF/XIN-IN
Enter the menu, click the MENU settings. When a user is set to ON, the automatic
night vision feature is turned on (when the ambient light is dark, it will be
automatically converted into night vision mode, the image becomes black and white,
and infrared sensors). In this case, the user should be aware of possible 2,3,4,5,6,7
other items set to Auto (default setting). If this is set to OFF, the user can press the
LEFT / RIGHT button to switch color / black and white state. When this is set to XIRIN mode, the user can use the back-end interface (XIR-I), when the input +12 V, will
be automatically converted into night vision mode, it will automatically return to the
state of the input color 0V or not connected, you can synchronized with infrared light.
10: SBLC----------------ON/OFF
Enter the menu, click Settings MENU ON / OFF, ON is set to open SBLC, press
LEFT / RIGHT buttons to adjust the parameter values SBLC, the adjustment range
(AS-7 --- AS +7). Select "OFF", under normal circumstances, when the light is too
strong or too dark, the user can open the menu is set to "ON", and check and adjust
the parameter values until the best results so far.
11: BLC------------------ON/OFF
Enter the menu, click MENU to open or close the backlight compensation. When the
backlight compensation will open symbols displayed on the screen.
12: D.ZOOM------------ON/OFF
Enter the menu, click MENU to open or close the digital zoom display.
13: OSD------------------ON/OFF
Enter the menu, click MENU to open or close the zoom scroll bar display.
14: MIRROR------------ON/OFF
Enter the menu, click the MENU enables the camera to turn on / off the Flip
Horizontal.
15: V.TIRN---------------ON/OFF
Enter the menu, click the MENU enables the camera to turn on / off the vertical flip.
16: FREEZE--------------ON/OFF
Enter the menu, click the MENU enables the camera to turn on / off the image freeze
mode.
17: EFFECT--------------OFF/PE/BW
Enter the menu, click to select MENU PE negative mode, B / W & W mode, and OFF
to return to normal mode.
18: ALARM--------------OFF/13 MODE
Enter the menu, click Settings MENU ON / OFF, press LEFT or RIGHT to enter the
alarm options.
19: P.ZONE1,2--------------ON/POSITION/SIZE/OFF
Click the MENU button to set the mask setting mode
ON:Open the shield zone display
POS:Adjust the position of masking area, press LEFT / RIGHT / UP / DOWN to
adjust.
SIZE:Adjust the masking size, press LEFT / RIGHT / UP / DOWN to adjust the size.
OFF:Close masking zone display
20: Z.SPEED----------------Numerical(06)
Zoom speed 01-08, 01 is the slowest, 08 is the fastest, factory setting is 06
Specification
Model
DF-EX2700P
Image sensor
1/4-type Super HAD II CCD
Image sensor (Number
Approx. 570,000pixels
of effective pixels)
Horizontal resolution
670TVL
Signal system
PAL
Minimum illumination
Colour: 0.6 lx;Typical (F1.6,AGC on, 1/50 s)Colour: 0.04
(50%, Normal mode)
lxTypical (F1.6,AGC on, 1/3 s)
ICR-ON: 0.01 lx(F1.6, AGC on,1/3 s)
Recommended
100 lx to 100,000 lx
illumination
S/N ratio
More than 50 dB
Gain
Auto / Manual (-3 step to 28 step, +2 step / total 16 steps)
Max. Gain Limit (6 step to 28step, +2 step step / total 12 steps)
Shutter speed
1/1 s to 1/10,000 s, 22 steps
Sync system
Internal / External (V-Lock)
Exposure control
Auto, Manual, Priority mode (shutter priority & iris priority), Bright, EV
compensation, Slow AE
Backlight compensation
Yes
Aperture control
16 steps
White balance
Auto, ATW, Indoor, Outdoor, Outdoor Auto, Sodium Vapor Lamp
(Fix / Auto), One-push, Manual
40x optical zoom
Lens
f=3.06 mm (wide) to 122.4 mm (tele)
F1.6 to F4.6
Digital zoom
12x (480x with optical zoom)
Focusing system
Auto (Sensitivity: normal, low), One-push AF, Manual, Interval
AF, Zoom Trigger AF, Focus compensation in ICR on
Horizontal viewing angle
60.0?(wide end) to 1.6?(tele end)
Minimum object distance
10 mm (wide end) to 1500 mm (teleend) (Default: 320 mm)
Video output (SD)
Analog: VBS Y/C, Digital: Y/Cb/Cr 4:2:2 (ITU-R BT656 Style)
Camera control interface
VISCA (CMOS 5 V level), Baud rate: 9.6 Kbps, 19.2 Kbps, 38.4
Kbps Stop bit: 1 bit
Camera features
Auto ICR
YES
Wide-D*1
YES (On / Off) (On: 90dB)
Noise reduction
YES
Progressive scan mode
YES
Image stabilizer
YES
Stablezoom
YES
Digital output
YES
Tone reproduction
YES(VE)
Spherical
masking
privacy
zone
YES
Motion detection
YES
Alarm
YES
Slow AE response
Yes (Approx. 2 minutes)
Picture effects
E-Flip,
Nega
Art,
Black
&
White,
Mirror
image,
Colour
enhancement
Picture freeze
YES
Slow shutter
YES
Temperature readout
YES
Title display
20 characters/line, max. 11 lines
Camera mode display
YES
Key switch control
YES
Camera operation switch
YES
General
Power requirements
6.0 V to 12.0 V DC
Power consumption
2.4 W (zoom / focus inactive, 9 V), 3.2 W (zoom/focus active, 9
V)
Operating temperature
-5 ℃ to +60 ℃ (23℉ to 140℉)
Storage temperature
-20 ℃ to +60 ℃ (-4℉ to 140 ℉)
Operating humidity
20% to 80%, Absolute humidity: 36 g/m3
Storage humidity
20% to 95%, Absolute humidity: 36 g/m3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising