IS Series Using Inputs for Background Music

IS Series Using Inputs for Background Music
APPLICATION NOTE
IS Series Using Inputs for Background Music
The IS Series has the ability to tie a music source to the line level inputs of the IS-CCU. This source can then be played
over the system by triggering one of the inputs. The source will be played over the system for the duration that the trigger
input is shorted together.
IS Series Input for Background Music Block Diagram
Paging Amplifier
Office
Trigger
Hallway
7
PQRS
2
ABC
5
JKL
8
3
DEF
6
PRIVACY TRANSFER
LIST
99.9
SETTING
MNO
9
TUV
WXYZ
0
#
ZOOM
BGM Source
WIDE
PA OUTPUT
P1
P2
P3
CONTACT OUTPUT
P4
L1
L2
L3
L4
L5
L6
CONTACT INPUT
L7
L8
CHIME INPUT
S1 E S2 E S3 E S4 E
B1
STRIP LENGTH
STRIP LENGTH
B2
11m
φ0.65~φ1.2
11m
φ0.8~φ1.2
POWER
STRIP LENGTH
11mm
φ0.8~φ1.2
IS-RCU
1CX1
1CX2
2CX1
2CX2
3CX1
3CX2
MASTER STATION
4CX1
4CX2
M1
M2
M3
M4
VIDEO/AUDIO
DOOR/SUB STATION
D1
D3
D2
D4
IS-SCU
1MX1
1MX2
1MX3
2MX1
IS-IPC
2MX2
2MX3
VIDEO OUTPUT
V1
IP1
IP2
V2
00-MA-CA-DD-RE-SS
ETHERNET
LAN
Link/
ACT
IP3
All the ports except [LAN] are not
for LAN network.
Do NOT connect to LAN network.
IS-CCU
DC48 V
AC POWER INPUT
AC100-240 V ~
50/60 Hz
DC POWER OUTPUT
DC48 V 2 A
+
SPEAKER
4
IS-RS
STATUS
IS-PU
HANDSET
1
GHI
CALL
TRANSMITCALL/TALK
Classroom
Door
Features
Overview
The IS-CCU has 4 trigger inputs (S1-S4), and 2 line level inputs (B1-B2). The line level inputs can be accessed when one
of the trigger inputs are shorted. The source material will then be played over a designated paging zone for the duration of
the short. Higher level calls, chime schedules, and paging announcements will override the line level input.
Procedure
Access the programming by logging into the IS Series intercom system. Access the IS-CCU in the Advance Station
Settings menu and assign the trigger input and line level input. Key areas are listed below. For complete instructions, refer
to the IS Series Local Setting Manual.
• Click Advanced Station Settings
◦ Select the IS-CCU
◦ Click Advanced Settings button
◦ Click Contact input button
◦ Select input to be used (S1-S4) from the drop down
◦ Click Normally open (NO) radio button
◦ Click Broadcast chime radio button
◦ Click External sound source radio button
◦ Select External sound source 1 or External sound source 2 from the drop down menu
(External sound source 1 = B1 input. External sound source 2 = B2 input.)
◦ Select Chime priority from the drop down menu (priority level for playing music)
◦ Select Zone name from the drop down menu
• Close the windows and click Temporarily stored to save changes
• Update the system
The background music source will now play over the designated zone any time the trigger input is shorted.
For more details about the features and information above, please contact Technical Support.
Aiphone Corporation | www.aiphone.com | tech@aiphone.com | (800) 692-0200
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising