Tech Necessities TN-1 bluetooth speaker User manual

Tech Necessities TN-1 bluetooth speaker User manual

Below you will find brief information for bluetooth speaker TN-1. This pocket Bluetooth speaker allows you to connect to a Bluetooth enabled device and stream music from this device wirelessly up to 10 metres away. The speaker features a built-in microphone, allowing you to answer and end phone calls hands-free. It comes with a Micro USB charging cable and an AUX cable for connecting to devices without Bluetooth.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

TN-1 Bluetooth speaker User Manual | Manualzz

pocket bluetooth speaker

Model: TN-1

Please retain this User Manual for future use and reference.

Image above only as a reference - colours may vary.

Important Safety Instructions

When using any electrical apparatus, always observe safety regulations and use basic safety precautions to reduce the risk of fire, electric shock and personal injury, including the following;

1. Read, Keep and Follow these safety instructions.

2. Keep out of reach of young children.

This apparatus is not suitable for use by young children without supervision. Young children must be supervised to ensure that they do not play with the apparatus.

3. This apparatus is not intended for use by persons (including young children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or given specific instruction about the use of this appliance by a person responsible for their safety.

7. DO NOT block any ventilation openings. Keep away from curtains, newspapers and restricted areas.

Always allow a sufficient gap around the apparatus to avoid overheating.

8. DO NOT use near any heat sources such as radiators, gas heaters, stoves or other apparatus (including amplifiers) that produce heat. Do not leave in direct sunlight.

9. WARNING. Do not place any naked flame source, such as lighted candles on any electrical apparatus.

10. WARNING! Connect to a suitable USB

Source (5V / 500Ma) only.

4. WARNING. Do not insert any objects into any openings of an electrical apparatus.

5. WARNING. Do not use this apparatus near water. To avoid the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not expose the apparatus to dripping water or splashes.

11. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way eg. when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen onto the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

6. Do not immerse in any liquid while in use or while cleaning. Clean only with a damp cloth and dry with a dry towel.

Do not use harsh abrasives as these may damage plastic parts.

12. WARNING. Do not use any electrical apparatus outdoors. If any electrical apparatus is to be used outdoors, use a suitable Isolating transformer or

Electrical Safety Switch (RCD).

Important Safety Instructions continued

13. For household use only. This apparatus is not intended for commercial use.

14. This apparatus is manufactured with non-replaceable Lithium battery. DO NOT attempt to replace this battery.

15. DO NOT leave this product on charge for extended periods of time.

16. If this apparatus is to be used by a third party, please supply these instructions with it.

17. No liability will be accepted for any personal injury or damage caused by failure to follow these instructions.

Thank you for purchasing the TN-1 Tech Necessities Bluetooth Speaker.

The TN-1 Bluetooth speaker was designed and created by Tech Necessities to provide the user with a high quality product experience. This speaker can be used for various occasions that require a convenient and on the go music solution.

Please read the following manual in full before proceeding to using this product.

User Manual Contents

1. What’s in the Box

2. Guide to your Bluetooth Speaker

3. Button Functions

4. Getting Started

5. Making a Bluetooth Connection

6. Making an AUX connection

7. Hands-free Functions

8. Charging your Bluetooth speaker

9. Care and Maintenance

10. Trouble Shooting

What’s in the Box?

TN1 Bluetooth Speaker

Micro USB Charging Cable

AUX Cable (3.5mm cable)

User Manual

Guide to your Bluetooth Speaker

1 2 3 4

5 6 7

8 9

5

6

7

8

9

Location

1

2

3

4

Description

Volume Decrease /

Previous Track

Play / Pause

Volume Increase /

Next Track

Hands-free

ON / OFF

DC 5V

AUX

LED light

Microphone

Function

Long press to turn speaker volume down.

Short press to skip to the previous track.

Short press to Pause and Play music. Hold to cancel current Bluetooth connection.

Long press to turn speaker volume up.

Short press to skip to the next track.

Short press to answer / hang up the telephone call of the connected mobile.

Slide to turn speaker ON and OFF.

Micro USB port for charging.

AUX input for 3.5mm cable connection.

Light indication for pairing and charging.

Microphone location for hands-free calls.

Getting Started

Before proceeding to operate the product as you read through these instructions please take some time to read and understand the steps and instructions beforehand.

Making a Bluetooth Connection

This pocket Bluetooth speaker is equipped with Bluetooth technology allowing you to connect to a Bluetooth enabled device and streaming music from this device wirelessly up to 10 metres away.

Step One

Turn on your Bluetooth speaker by sliding the ON / OFF button on the rear of the speaker.

Step Two

Once ON, the LED on the front grill of the speaker will flash the colour BLUE. The flashing BLUE LED indicates the speaker is searching for a Bluetooth connection.

Step Three

Using a Bluetooth enabled device such as laptop or smartphone; enter the Bluetooth settings to search and select the name ‘TN-1’ in the device list. If a password is required please use ‘0000’

Step Four

Once the connection is successful and stable your speaker will emit 3 short beeps. You are now ready to enjoy music wirelessly from your connected device.

Important features to know whilst connected

Disconnect the Bluetooth connection and connect to a new device

If you wish to switch to another external Bluetooth device, hold down the PLAY

/ PAUSE button pairing key for 4-5 seconds to cancel current connection. To connect another device, follow the steps as above.

Your speaker will remain connected to your connected device

Although you may turn OFF your Bluetooth speaker, when turned back on, the speaker will automatically connect to the last successfully paired device when turned ON again.

Volume Controls whilst connected

When paired, both volume controls are functional. Ensure volume is adjusted on both external device and speaker to reach an ideal speaker volume.

Making an AUX Connection

Once the speaker is powered ON, you can proceed with establishing an AUX connection between your speaker and an external device. To make an AUX connection, insert the supplied AUX cable into the rear AUX input on the speaker and the external device.

Volume control on speaker and device is synchronized in AUX mode.

Hands-Free Function

When the Bluetooth speaker is paired with your mobile by Bluetooth, you can press the

Hands-Free Button to answer or hang up the telephone call.

If you have answered the telephone call by short pressing the Hands-Free button, your voice will be transferred by the built-in microphone and you will hear the caller’s voice from the Bluetooth speaker.

Charging your Bluetooth Speaker

To charge the TN-1 Speaker, please use the USB cable provided. Any other power supply used with this device may damage the speaker. When your speaker is charging, the LED will stay a constant RED. When the charging is completed, the LED light will turn off.

Ensure any USB socket used for charging is 5V DC and rated in excess of 1 AMP.

IMPORTANT!

AVOID leaving your speaker on charge for long periods of time.

AVOID leaving speaker in a low battery / zero battery state as it will affect the life of your battery.

Care and Maintenance

For any maintenance or repairs of your speaker, please contact customer support.

Please DO NOT attempt to repair this speaker yourself as this may void any product warranty given.

When cleaning the speaker, the speaker must be turned OFF before you begin.

Do not use volatile solvents (such as ethanol) chemicals may damage the speaker.

Only use mild detergent and slightly damp cotton or microfibre cleaning cloth.

If the cotton or cloth is too wet, it may drop water into the product panels and speakers which may cause the product to malfunction.

Troubleshooting

In the event that you encounter any problems using this product, please refer to the below before contacting customer support

The speaker has no sound

Adjust the volume on the speaker and any connected devices.

Please ensure the AUX cable is connected correctly.

No power or not charging

Please make sure that the USB cable is plugged in properly.

Please check the cable is not faulty.

Bluetooth signal is weak and music is dropping out

Please ensure your battery is fully charged.

Please ensure you are not further than 10 metres away from the Bluetooth

speaker.

Product Specification

Speaker Driver:

Power Supply:

40mm

USB (5V, 500 mA)

Battery Charging Time: 2-3 Hours

Product Size: 131 x 38 x 61 mm

While every effort has been made in the preparation of this User Manual, the publishers cannot be held responsible for the accuracy of the information contained herein or any consequences arising from it.

Guarantee Card

This product is guaranteed against faulty materials and workmanship for a period of one year from the date of purchase. The obligation to the purchaser under this warranty is limited to servicing the unit and replacing defective parts when the product is returned freight prepaid to the retailer. This warranty becomes void if the product has been tampered with, damaged by accident, damaged in any other way by improper use or has been purchased second hand. All production orders have quality inspections. In the unlikely event of a deficiency, please contact the retailer from which this product was purchased.

WARRANTY FOR PRODUCTS USED COMMERCIALLY LIMITED TO 90 DAYS

TYPE OF PRODUCT: _____________________________________________________

MODEL NO.: ____________________ PURCHASE DATE: ______________________

PRODUCT PURCHASED FROM: ___________________________________________

________________________________________________________________________

YOUR NAME: ___________________________________________________________

ADDRESS: ______________________________________________________________

________________________________________________________________________

PHONE NUMBER: ________________________________________________________

IMPORTANT!

Please retain this warranty card along with your purchase receipt. Please do not post to the retailer or importer. If service is required, both of these documents are to be returned with the product to your retailer, otherwise a fee may be charged.

NEW ZEALAND CALL TOLL FREE 0800-898 580

advertisement

Key Features

  • Bluetooth connectivity
  • Hands-free calling
  • AUX input
  • Compact size
  • Long battery life

Frequently Answers and Questions

How do I connect the TN-1 Bluetooth speaker to my phone?
Turn on the speaker, then go to your phone's Bluetooth settings and select 'TN-1'. Enter the password '0000' if prompted.
How do I charge the TN-1 Bluetooth speaker?
Use the supplied Micro USB cable to connect the speaker to a 5V power source. The LED light will turn red while charging and turn off when fully charged.
Can I use the TN-1 Bluetooth speaker for hands-free calling?
Yes, the TN-1 Bluetooth speaker has a built-in microphone for hands-free calling. Press the Hands-Free button to answer or hang up a call.

Related manuals

Download PDF

advertisement