VWR® Thermal Shake Touch
5 year warranty
Intuitive 4.3” color LCD touch screen
Supplied with 1.5mL block
VWR® Thermal Shake Touch
VWR® cooling TheRmal shake Touch
VWR® cooling Thermal shake Touch
intuitive 4.3” color lcD touch screen
ability for rapid heating, cooling and high speed shaking
The VWR® Cooling Thermal Shake Touch is designed for applications that require
consistent and precise results. With heating, cooling and shaking capabilities, the
VWR® Cooling Thermal Shake Touch uses interchangeable blocks to accommodate
a wide variety of tubes and microplates. The easy-to-use 4.3” color LCD touch screen
allows the user to save and visibly track progress through the live status bar for five user
defined programs, each with five individual steps. The unit’s enhanced electronics and
dual temperature sensors provide accurate, dependable temperature settings across
the operating range.
operating Features:
low profile design: The low profile design minimizes the unit’s footprint on the bench.
PiD temperature controller: Maintains precise temperature control from 13°C below
ambient to 100°C. Easy-to-use controls allow user to adjust temperature in 0.1°
increments.
lcD touch screen: Enables faster setting of temperature, speed and time, which can
all be viewed at once. Display features on-screen help topics with operational tips.
Touch screen is compatible with rubber gloves used in labs. USB port can transfer
information to a flash drive for data logging, program storage and software updates.
Program control: Program control capabilities allow user programmable operation for
automated use and memory for five separate, 5-step programs.
89232-904
Temperature Range
Temperature accuracy
speed Range
17°C below ambient to 100°C
± 0.5°C between 20°C and 45°C
± 2°C below 20°C
and above 45°C
300 to 3000rpm
speed accuracy
± 2%
Temperature ramp rate: Adjustable temperature ramp rate feature separately defines
the heating and cooling rates in increments of 0.5°C/min.
Timer
1 minute to 99 hours, 59 minutes
orbit
3mm (0.12”)
single point calibration mode: For maximum temperature accuracy, the single point
calibration procedure allows the user to calibrate up to 6 different defined temperatures.
heating Rate
5°C/min
cooling Rate
above ambient: 2-3°C/min
below ambient: 0.5-1.0°C/min
Pulse mode feature: The unit is equipped with a pulse mode feature ideal for quick
vortex applications.
10.25 x 9.75 x 5.2”
(26 x 24.8 x 13.2cm)
safety Features:
17lbs (7.7kg)
cool touch housing: Constructed from a high-quality heat and chemical resistant ship Weight
polymer. The unit’s housing remains cool to the touch throughout normal operating
operating conditions:
temperatures.
Unit can operate in conditions from 5 to 35°C (41 to 95°F), maximum
maximum temperature limiting function: Ensures the temperature will not exceed 80% relative humidity, non-condensing.
user defined limits allowing control of temperature sensitive samples.
applications:
hot top indicator: A hot top warning will illuminate when the temperature reaches Cell cultures, DNA, RNA, hybridization, and protein studies.
40°C and will remain lit until the unit is cooled below 40°C.
audible alarm: In timed mode, an alarm will sound if the timer reaches zero or set- ordering information
point temperature is reached. Additionally, the heat function will automatically shut off if Unit includes a 92” (234cm) detachable, 3-wire cord and plug (230 volt
the unit recognizes an internal issue.
units are supplied with Euro type plug). Unit is also supplied with a 1.5mL
optional nisT traceable certificate: Includes a 3 point NIST traceable calibration. block, a rack and a cover. 2 year limited warranty on parts and labor.
®
®
The traceable certificate includes actual calibration measurement data and uncertainty. Eppendorf Thermomixer R blocks are compatible on the VWR Cooling
Thermal Shake Touch.
The calibration laboratory is ISO/IEC 17025 compliant.
VWR® cooling Thermal shake Touch
cat. no.
Cooling Thermal Shake Touch
Cooling Thermal Shake Touch
Cooling Thermal Shake Touch with NIST Traceable Certificate
Cooling Thermal Shake Touch with NIST Traceable Certificate
120V | 1.8 amps | 215 watts
230V | 0.9 amps | 210 watts
120V | 1.8 amps | 215 watts
230V | 0.9 amps | 210 watts
89232-904
89232-906
89370-964
89370-966
VWR® TheRmal shake Touch
VWR® Thermal shake Touch
The VWR® Thermal Shake Touch is designed for applications that require consistent
and precise results. With heating and shaking capabilities, the VWR® Thermal Shake
Touch uses interchangeable blocks to accommodate a wide variety of tubes and
microplates. The easy-to-use 4.3” color LCD touch screen allows the user to save and
visibly track progress through the live status bar for five user defined programs, each
with five individual steps. The unit’s enhanced electronics and temperature sensor
provide accurate, dependable temperature settings across the operating range.
operating Features:
low profile design: The low profile design minimizes the unit’s footprint on the bench.
89232-908
PiD temperature controller: Maintains precise temperature control from 4°C above
ambient to 100°C. Easy-to-use controls allow user to adjust temperature in 0.1°
increments.
lcD touch screen: Enables faster setting of temperature, speed and time, which can
all be viewed at once. Display features on-screen help topics with operational tips.
Touch screen is compatible with rubber gloves used in labs. USB port can transfer
information to a flash drive for data logging, program storage and software updates.
Temperature Range
Program control: Program control capabilities allow user programmable operation for
automated use and memory for five separate, 5-step programs.
speed Range
Temperature accuracy
4°C above ambient to 100°C
± 1°C between 20°C and 45°C
± 2°C above 45°C
300 to 3000rpm
Temperature ramp rate: Adjustable temperature ramp rate feature separately defines
the heating rate in increments of 0.5°C/min.
speed accuracy
Timer
1 minute to 99 hours, 59 minutes
single point calibration mode: For maximum temperature accuracy, the single
point calibration procedure allows the user to calibrate up to 6 different user defined
temperatures.
orbit
3mm (0.12”)
Pulse mode feature: The unit is equipped with a pulse mode feature ideal for quick
vortex applications.
safety Features:
cool touch housing: Constructed from a high-quality heat and chemical resistant
polymer. The unit’s housing remains cool to the touch throughout normal operating
temperatures.
maximum temperature limiting function: Ensures the temperature will not exceed
user defined limits allowing control of temperature sensitive samples.
hot top indicator: A hot top warning will illuminate when the temperature reaches
40°C and will remain lit until the unit is cooled below 40°C.
± 2%
heating Rate
5°C/minute
10.25 x 9.75 x 5.2”
(26 x 24.8 x 13.2cm)
ship Weight
17lbs (7.7kg)
operating conditions:
Unit can operate in conditions from 5 to 35°C (41 to 95°F), maximum
80% relative humidity, non-condensing.
applications:
Cell cultures, DNA, RNA, and protein studies.
ordering information
audible alarm: In timed mode, an alarm will sound if the timer reaches zero or setpoint temperature is reached. Additionally, the heat function will automatically shut off if
the unit recognizes an internal issue.
Unit includes a 92” (234cm) detachable, 3-wire cord and plug (230 volt units
are supplied with Euro type plug). Unit is also supplied with a 1.5mL block,
a rack and a cover. 2 year limited warranty on parts and labor. Eppendorf®
optional nisT traceable certificate: includes a 3 point NIST traceable calibration. The
traceable certificate includes actual calibration measurement data and uncertainty. The
calibration laboratory is ISO/IEC 17025 compliant.
Thermomixer R® blocks are compatible on the VWR Thermal Shake
Touch.
VWR® Thermal shake Touch
cat. no.
Thermal Shake Touch
Thermal Shake Touch
Thermal Shake Touch with NIST Traceable Certificate
Thermal Shake Touch with NIST Traceable Certificate
120V | 1.8 amps | 215 watts
230V | 0.9 amps | 210 watts
120V | 1.8 amps | 215 watts
230V | 0.9 amps | 210 watts
89232-908
89232-910
89370-968
89370-970
VWR® accessoRies
VWR® accessories
VWR® microplate Block
sample Type
no. of Wells
Well Diameter
Well Depth
1
5.06 x 3.38” (12.9 x 8.6cm)
1.00” (2.5cm)
sample Type
no. of Wells
Well Diameter
Well Depth
0.5mL Tubes*
30
0.312” (0.79cm)
1.01” (2.57cm) 5.7 x 4.1 x 1.8” (14.5 x 10.4 x 4.6cm)
89232-914
1.5mL Tubes*
24
0.438” (1.11cm)
1.32” (3.35cm) 5.7 x 4.1 x 2.1” (14.5 x 10.4 x 5.3cm)
89232-916
2.0mL Tubes*
24
0.454” (1.15cm)
1.32” (3.35cm) 5.7 x 4.1 x 2.1” (14.5 x 10.4 x 5.3cm)
89232-918
5-7mL Tubes
24
0.472” (1.20cm)
1.35” (3.43cm) 5.7 x 4.1 x 2.2” (14.5 x 10.4 x 5.6cm)
89232-920
no. of Wells
Well Diameter
24
0.496” (1.26cm)
no. of Wells
Well Diameter
15mL Conical Tubes
9
0.680” (1.73cm)
4.02” (10.2cm) 5 x 4 x 5” (12.7 x 10.2 x 12.7cm)
89232-924
50mL Conical Tubes
4
1.180” (3.00cm)
3.89” (9.88cm) 5 x 4 x 5” (12.7 x 10.2 x 12.7cm)
89232-926
Microplate Thermal Block with Lid
Dimensions
6.5 x 4.75 x 4” (15.2 x 10.2 x 5.1cm)
cat. no.
89232-912
VWR® Tube Blocks
Dimensions
cat. no.
* Supplied with rack and cover
VWR® cryo Tube Block
sample Type
2.0mL Cryo Tubes
Well Depth
Dimensions
1.34” (3.40cm) 5.7 x 4.1 x 2.2” (14.5 x 10.4 x 5.6cm)
cat. no.
89232-922
VWR® conical Tube Blocks
sample Type
Well Depth
Dimensions
cat. no.
VWR® inDusTRy sTanDaRD
VWR® introduces The new industry standard
The all new VWR Thermal Shake Touch line offers industry leading performance, features, and experiment traceability that is unmatched in the marketplace.
The Temperature Ranges Will Take your experiments Further
dard.
The Ramp Rates Will get you There Faster
The VWR Cooling Thermal Shake Touch will get you to your set-point faster; but, if your experiment requires a little more care, you can adjust these heating and
cooling rates according to your needs.
When Traceability matters – VWR is your only choice
The VWR Thermal Shake Touch line is the only thermal shaker line available in the marketplace with a NIST (National Institute of Standard and Technology)
standard).
VWR® inDusTRy sTanDaRD
Touch screen Technology
Touch panel is sealed for easy cleaning
Manual calibration is easy and intuitive
Help available on every screen in 6 languages: English, Spanish, French, Portuguese,
German, and Italian
<
Clear 4.3” LCD screen is
easy to view from a distance
Program tracking provides clear
visual progress
>
<
Active settings are
always visible
>
Temperature and speed
settings are easy and intuitive
>
>
Intuitive interface makes for easy operation and programming
1213 Lit. No. 93574W
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising