Enjoy D-STAR Communication

Enjoy D-STAR Communication
VHF/UHF DUAL BAND DIGITAL TRANSCEIVER
Enjoy D-STAR Communication
More Actively and More Comfortably
Terminal Mode and Access Point Mode
Full dot-matrix LCD
Bluetooth®
GPS
iOS™/Android™ Apps
DV
Gateway
Ac
Intuitive User Interface
Terminal Mod
e
Flexible Installation
ce
s s Point Mode
Compact, User-Friendly VHF/UHF Dual Bander
Offers a Variety of Operating Styles
Smart Operation
Advanced Operation with a
Smart device and Bluetooth
®
Applications for iOS™ and Android™ devices*
DV GATEWAY FUNCTIONS
The RS-MS1I (for iOS™ devices) and RS-MS1A (for Android™
devices) enable you to wirelessly connect to the ID-4100A and
remotely set the DR functions, link with a map application and
send/receive messages over the DV mode. In addition, pictures
taken by a smart device can be transmitted via the DV Fast Data
mode or DV mode.
Terminal Mode and Access Point Mode
Expand Communication Coverage and Fun
Terminal and Access Point modes* enable you to enjoy long-distance D-STAR (Digital Smart Technology for Amateur
Radio) communication through the Internet. You can access the D-STAR repeater network through the Internet, regardless
of locations and conditions of nearby repeaters.
* The optional UT-137 Bluetooth unit must be installed in the ID-4100A. Some functions may not
work properly, depending on smart devices used.
Wireless Operation with VS-3 Bluetooth® Headset*
The optional VS-3 Bluetooth® headset provides convenient wireless
communication away from the transceiver. The VS-3 remotely
controls the ID-4100A with three programmable buttons.
* An optional free download software, RS-MS3W is required to be installed in the PC. An optional free download application, RS-MS3A is required to be installed, in the Android™ device.
Terminal Mode
Access Point Mode
®
By connecting the ID-4100A to the Internet through a Windows
PC or Android™ device, the Terminal mode enables you to use a
D-STAR repeater to make D-STAR gateway calls.
* Installation example (Using the optional OPC-2350LU data cable and RS-MS3W software for Windows® PC)
®
* The optional UT-137 Bluetooth® unit must be installed in the ID-4100A.
The Access Point mode enables another D-STAR transceiver to
make D-STAR gateway calls through the ID-4100A connected to
the Internet. 50 watts of output power can be used for a D-STAR
access point.
OPC-2350LU
DR function setting example
Text messaging example
Sending picture example
Repeater map example
©2014 Google - Map data
©2014 Google
OPC-2350LU
DV Fast Data Mode*
CQ
ID-4100A
Windows® PC or
Android™ device
D-STAR
repeater
ID-4100A
Windows® PC or
Android™ device
D-STAR
repeater
By using the data place in voice
frames, the ID-4100A transfers data
3.5 times faster (3480 bps) than in the
conventional DV mode (with voice).
Conventional low-speed data mode
950 bps
DV Fast data mode
3480 bps
* The DV Fast Data mode is not compatible with the DV
mode low-speed data communication.
Flexible Installation
User Friendly
Compact, Detachable Controller
for Flexible Installation
DR Function with the
Latest Icom User Interface
The controller can be attached or detached from the main unit
for flexible installation. By using the supplied OPC-837 controller cable, you can install the controller up to 3.5 meters
(11.5 ft) away from the main unit.
DR (D-STAR Repeater) Function
VHF/UHF DUAL BAND DIGITAL TRANSCEIVER
The DR function makes D-STAR communications simple. By
simply selecting a destination call sign in “To”, and your access
repeater in “From”, you can talk with other D-STAR users. In
addition, using the reflector function, you can talk through several repeaters at once.
Easy-to-Read Full Dot-Matrix Display
To increase the amount of display information, a full dot-matrix
display is used in the ID-4100A. For example, Repeater list or
GPS position information are clearly arranged and easy to read.
Actual size
microSD Card Slot for Voice and Data Storage*
Selectable LCD and Key Backlight Color
When used with a microSD card, you can store
various information including voice memory, TX
voice message, QSO log, RX history log and GPS
log data. Memory channels and other settings
can be saved and loaded into the transceiver.
The backlight color of the LCD and keys is selectable from white,
green, amber or blue. Using the backlight night time setting
function, the display backlight brightness can automatically be
changed when the designated time comes.
* A microSD card is required separately.
microSD card slot
Integrated GPS Receiver
GPS position information example
Repeater list example
DV/FM Near Repeater Search Function
The DV/FM near repeater search function assists you in accessing
nearby repeaters, even in areas you are visiting for the first time.
The function searches for nearby repeaters using the repeater
memories with the GPS position information.
* Vehicle installation example (Using the optional MBF-1 mount base and MBA-8 controller bracket)
* To use the near repeater search function, the position data of the repeater is required. The
ID-4100A will be shipped with the D-STAR repeater memories preprogrammed, but the position
data of some D-STAR repeaters may not be entered or exact.
Green
Amber
The integrated GPS receiver shows your own position, course,
speed and altitude on the display and can be used for exchanging position reports, D-PRS and searching for nearby repeaters.
Wideband Receiver
The ID-4100A receives 118–174 and 230–550 MHz*1. You can
listen to air band, marine, weather channels*2 and other VHF and
UHF utility communications.
*1 Working range not guaranteed. *2 USA version only.
Blue
Other Features
•The QUICK key allows instant access to menus listing dedicated functions
depending on mode
• Multiple scan functions for Memory/Bank scan, Full scan, Band scan,
Program scan, Program link scan, Duplex scan Tone scan and DR scan
• 16 channels of DTMF memory (24-digit)
• CTCSS/DTCS signaling with the split tone functions (analog mode)
• 8.33 kHz air band channel reception
• Auto repeater function (USA version only)
• HM-207S remote-control hand microphone (supplied as standard)
VHF/UHF DUAL BAND DIGITAL TRANSCEIVER
SPECIFICATIONS
OPTIONS
Some options may not be available in some countries. Please ask your dealer for details.
Bluetooth® UNIT &
Bluetooth® HEADSET
HAND MICROPHONES
GENERAL
Frequency coverage
Version
USA
Export
Transmit
Receive
144–148, 430–450 MHz 118–174, 230–550 MHz*1
137–174, 400–470 MHz*2 118–174, 230–550 MHz*2
Guaranteed range *1 144–148, 430–450 MHz, *2 144–148, 430–440 MHz.
Type of emission
Mode
Operating temperature range
Frequency stability
Antenna impedance
F2D, F3E, F7W
DV, FM, FM-N, AM (RX only), AM-N (RX only)
–10°C to +60°C; 14°F to +140°F
±2.5 ppm (–10°C to +60°C on the basis of 25°C)
50 Ω (SO-239)
1000 regular channels, 4 call channels, 50 program scan
Number of memory channels
edges, 1500 repeater memories and 300 GPS memory
Power supply requirement
13.8 V DC ±15%
Current drain Tx
13.0 A
(approximate) Rx
1.2 A/0.9 A (Max. audio/Stand-by)
Main unit + Controller
150 × 40 × 171.9 mm; 5.9 × 1.6 × 6.8 in
Controller
122 × 40 × 29.9 mm; 4.8 × 1.6 × 1.2 in
Dimensions
(W×H×D, Projections are not included.)
Weight
Main unit
1.1 kg; 2.4 lb
(approximate) Controller
100 g; 3.5 oz
TRANSMITTER
Output power (at 13.8 V DC)
Max. frequency deviation
Spurious emissions
Microphone impedance
50 W, 15 W, 5 W (Hi, Mid, Low)
±5.0 kHz/±2.5 kHz (W/N)
Less than –60 dBc
600 Ω (8-pin modular)
RECEIVER
Intermediate frequencies
46.35 MHz/450 kHz (1st/2nd)
FM, FM-N
Less than 0.18 μV (amateur bands at 12 dB SINAD)
Sensitivity
Less than 0.22 μV (at 1% BER)
DV
Squelch sensitivity
Less than 0.13 μV (threshold)
FM/FM-N
More than 60 dB/55 dB
Selectivity
DV
More than 50 dB
Spurious and image rejections
More than 60 dB
Audio output power
More than 2.0 W (10% distortion, 8 Ω load)
External speaker connector
2 conductor 3.5 (d) mm (1⁄8ʺ)/8 Ω
(Except amateur bands.)
Receiver sensitivity
FM/FM-N (12 dB SINAD)
137–159.995 MHz Less than 0.32 μV
230–259.995 MHz Less than 1.8 μV
322–374.995 MHz Less than 0.56 μV
400–499.995 MHz Less than 0.32 μV
AM/AM-N (10dB S/N)
118–136.991 MHz Less than 1.0 μV
260–321.995 MHz* Less than 1.8 μV
160–174.000 MHz
260–321.995 MHz
375–399.995 MHz
500–550.000 MHz
Less than 0.32 μV
Less than 0.56 μV
Less than 0.56 μV
Less than 0.56 μV
HM-232
HM-209 Active
noise canceling
HM-207S
UT-137
HM-154
VS-3
Use with UT-137
in a pair
EXTERNAL SPEAKERS
CONTROLLER
EXTENSION CABLE
MICROPHONE
EXTENSION CABLES
SP-35: 2 m (6.5 ft) cable SP-30
SP-35L: 6 m (19.6 ft)
102.5 mm (4 inch )
cable
diameter speaker
OPC-1156
3.5 m (11.4 ft) cable with
a modular connector
OPC-440: 5 m (16.4 ft)
OPC-647: 2.5 m (8.2 ft)
MOUNTING BASE &
CONTROLLER BRACKET
MOUNTING BRACKET
MBA-8
MBF-1
Suction cup mounting base.
MBA-8 is required.
DATA COMMUNICATION
CABLE
OPC-2350LU
USB cable for connection with an Android™
device or a PC.
MBF-4
For mounting the main
unit.
SOFTWARE/APPLICATION
• RS-MS1A: Remote control application for Android.™
• RS-MS1I: Remote control application for iOS.™
• RS-MS3A: Terminal/AP mode application for Android.™
• RS-MS3W: Terminal/AP mode software for Windows® PC.
• CS-4100: Programming software for Windows® PC.
* Applications for Android™ can be freely download from Google Play.
* Application for iOS™ can be freely download from App StoreSM.
* Software for Windows® PC can be freely download from the Icom website.
OTHER OPTIONS
• OPC-478UC: USB programming
cable for PC.
• OPC-1529R: RS-232 data communication cable for PC.
• OPC-589: Microphone adapter
cable for use with a 8-pin
microphone.
Software/Application Comparison Chart
Software/App
RS-MS1A
RS-MS1I
RS-MS3A
RS-MS3W
CS-4100
230–259.995 MHz* Less than 5.6 μV
322–374.995 MHz* Less than 1.8 μV
OS
Android™ 4.0 or later
iOS™ 8.0.1 or later
Android™ 4.0 or later
Windows® 7 or later
Windows® 7 or later
Function
Remote control operation
Remote control operation
Terminal/Access Point mode
Terminal/Access Point mode
Programming
Required option
UT-137
UT-137
OPC-2350LU
OPC-2350LU
microSD card/OPC-2350LU/
OPC-1529R/OPC-478UC
Main unit
(Front panel)
* Only AM mode.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
• Hand microphone, HM-207S
• Controller cable, OPC-837 (3.5 m; 11.4 ft)
Controller Connector
microSD Card Slot
• DC power cable, OPC-345B
• Microphone hanger • Spare fuse
Microphone
Connector
(Rear panel)
Note for the Terminal mode and Access point mode:
• An Internet IP connection is necessary for a PC (Windows®) or Android™ device. (Either a dynamic or static IP
address can be used.) • Before you set up the Access point, check any regulations or laws in your country.
• Only one D-STAR transceiver can transmit through an Access point at a time. • For the Access point or Terminal mode operation, you must register your MY and Access point call signs with a Gateway repeater/server that
has the RS-RP3C installed.
Data Jack
External Speaker Jack
Antenna Connector
D-STAR (Digital Smart Technology for Amateur Radio) is a digital radio protocol developed by JARL (Japan Amateur Radio League). Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan,
the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries. Android and Google Play are registered trademarks or trademarks of Google Inc. Windows is either a registered
trademark or a trademark of Microsoft Corporation in the United States and/or other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is
under license. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. App Store is a service mark of Apple Inc. All other trademarks are the properties of their respective holders.
NEVER operate the transceiver while driving a vehicle. Safe driving requires your full attention—anything less may result in an accident.
1-1-32, Kamiminami, Hirano-Ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013
12421 Willows Road NE,
Kirkland, WA 98034, U.S.A.
Phone: +1 (425) 454-8155
Fax:
+1 (425) 454-1509
E-mail: sales@icomamerica.com
URL: http://www.icomamerica.com
Communication Equipment
Auf der Krautweide 24
65812 Bad Soden am Taunus, Germany
Phone: +49 (6196) 76685-0
Fax:
+49 (6196) 76685-50
E-mail: info@icomeurope.com
URL: http://www.icomeurope.com
Zac de la Plaine,
1 Rue Brindejonc des Moulinais, BP 45804,
31505 Toulouse Cedex 5, France
Phone: +33 (5) 61 36 03 03
Fax:
+33 (5) 61 36 03 00
E-mail: icom@icom-france.com
URL: http://www.icom-france.com
Glenwood Centre #150-6165
Highway 17A, Delta, B.C.,
V4K 5B8, Canada
Phone: +1 (604) 952-4266
Fax:
+1 (604) 952-0090
E-mail: info@icomcanada.com
URL: http://www.icomcanada.com
Ctra. Rubi, No. 88 "Edificio Can Castanyer"
Bajos A 08174, Sant Cugat del Valles,
Barcelona, Spain
Phone: +34 (93) 590 26 70
Fax:
+34 (93) 589 04 46
E-mail: icom@icomspain.com
URL: http://www.icomspain.com
Unit 1 / 103 Garden Road,
Clayton, VIC 3168 Australia
Phone: +61 (03) 9549 7500
Fax:
+61 (03) 9549 7505
E-mail: sales@icom.net.au
URL: http://www.icom.net.au
Rua Itororó, 444 Padre Eustáquio
Belo Horizonte MG,
CEP: 30720-450, Brazil
Phone: +55 (31) 3582 8847
Fax:
+55 (31) 3582 8987
E-mail: sales@icombrazil.com
Blacksole House, Altira Park,
Herne Bay, Kent, CT6 6GZ, U.K.
Phone: +44 (0) 1227 741741
Fax:
+44 (0) 1227 741742
E-mail: info@icomuk.co.uk
URL: http://www.icomuk.co.uk
6F No. 68, Sec. 1 Cheng-Teh Road,
Taipei, Taiwan, R.O.C.
Phone: +886 (02) 2559 1899
Fax:
+886 (02) 2559 1874
E-mail: sales@asia-icom.com
URL: http://www.asia-icom.com
www.icom.co.jp/world
No.101, Building 9, Caifuxingyuan Park,
No.188 Maoting Road, Chedun Town,
Songjiang District, Shanghai, 201611, China
Phone: +86 (021) 6153 2768
Fax:
+86 (021) 5765 9987
E-mail: bjicom@bjicom.com
URL: http://www.bjicom.com
Count on us!
Your local distributor/dealer:
17HS0100** © 2017 Icom Inc.
Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising