Instruction Manual

Instruction Manual
SVAT ELECTRONICS
Now You Can See
Wireless Color Mini Pinhole
Security Camera System
COMPLETE SYSTEM
Instruction Manual
Model #
WSE103
www.svat.com
SVAT ELECTRONICS
Now You Can See
WSE103
www.svat.com
SVAT ELECTRONICS
Now You Can See
PRODUCT WARRANTY & REGISTRATION
Please visit our website at www.svat.com to apply for your
products warranty registration.
The warranty registration for is located under the support tab on the SVAT website.
We take quality very seriously. This is why all of our products come with a one year warranty from the
original purchase date against defects in workmanship and materials.
If you have warranty or support issues please contact us using any of the following methods:
SVAT Electronics USA
2315 Whirlpool St., Unit 333
NIagara Falls, New York
USA 14305
SVAT Electronics Canada
4080 Montrose Road
Niagara Falls, ON
Canada L2H 1J9
Phone: 866.946.7828
Fax: 888.771.1701
Email: support@svat.com
Website: www.svat.com
Warranty Terms
1. SVAT products are guaranteed for a period of one year from the date of purchase against defects in
workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price
at SVAT's option.
2. When service is required, the warranty is validated by the submission of a fully completed warranty card.
3. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered
with contrary to the applicable instruction manual.
4. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this
warranty.
5. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself
and no other warranty, expressed or implied is provided. SVAT assumes no responsibilities for any other
claims not specifically mentioned in this warranty.
6. This warranty does not cover the shipping cost, insurance or any other incidental charges.
7. You MUST call SVAT before sending any product back for repair. You will be given a Return Authorization
number. When returning the product for warranty service, please pack it carefully in the original box with all
supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem
(include RA #).
8. This warranty is valid only in Canada and the U.S.A.
9. This warranty card cannot be re-issued.
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Graphic Symbol Explanation:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE
WSE103
www.svat.com
SVAT ELECTRONICS
Now You Can See
TABLE OF CONTENTS
WHAT IS INCLUDED ............................................................1
WHAT IS COMPATIBLE ........................................................1
FEATURES............................................................................2
THINGS TO CONSIDER ......................................................2
INSTALLING THE CAMERA ................................................3
INSTALLING THE RECEIVER ..............................................3
ADVANCED FEATURES ......................................................4
OPERATING MODES ..........................................................5
TROUBLESHOOTING ..........................................................6
SPECIFICATIONS..............................................................7-8
NOTES ..................................................................................9
WHAT IS INCLUDED
1 Wireless Receiver
1 Color Camera
Mounting Bracket
Portable Battery Clip
4 PIN DIN to
RCA Wire (male)
2 Power Adapters
-
Mounting Hardware
1 Year Warranty
Instruction Manual
Online/Toll Free Tech Support
WHAT IS COMPATIBLE
The WSE103 is compatible with TVs, VCRs, DVRs, computers and other SVAT systems including:
WSE103C
WSE103
WSE201C
GX515
GX522
ClearVu DVRs
1
SVAT ELECTRONICS
Now You Can See
Congratulations on your purchase of the WSE103. The WSE103 consists of a
wireless receiver and a wireless miniature camera, and is an ideal product for
covert monitoring in your home or business.
FEATURES
•
2.4GHz wireless technology
•
Discreet monitoring with miniature color camera
•
Receiver supports audio output
•
Three channel selection for camera
•
Expandable - supports up to 3 cameras
•
Manual or auto switching between cameras
•
Adjustable cycle time between cameras
•
Battery operable for portable monitoring
THINGS T O CONSIDER BEFORE INSTALLATION
For best performance, follow these simple guidelines:
•
Camera(s) should be installed between 8 and 13 feet above the area to
be monitored
•
For best transmission, avoid installations where there are thick walls or major
obstructions between the camera and receiver
•
Ensure there are no obstructions in the camera's view, to maximize viewing area.
WSE103
2
SVAT ELECTRONICS
Now You Can See
INSTALLING THE CAMERA (TRANSMITTER)
1.
Unpack the camera.
2.
Decide whether the camera will be wall-mounted or sit on a desk/table top. If wall
mounting, use the mounting hardware. The camera can be adjusted for either
mounting scenario by rotating the camera to the required position.
3.
Decide whether to connect using AC power or 9 volt battery. If using a battery,
connect the 9V battery to the battery adapter, then connect it to the power jack of
the camera. If using the camera power adapter, just connect the power jack. Make
sure the camera is positioned no more than 5 1/2 feet from an AC power outlet.
4.
Select the camera operating channel on the slide switch on side of the housing.
Move the switches to positions 1,2, or 3.
The camera (Transmitter) installation is now complete.
INSTALLING THE RECEIVER
MAIN OPERATION
1.
Connect one end of the cable (4 PIN DIN) to the back of the receiver, and the yellow
plug (RCA composite) to the VIDEO IN jack of your TV/VCR/DVR. If you are using
this system with a camera that supports audio, also plug in the red and white
RCA plugs.
2.
Plug the receiver's power supply into the power jack located on the back of the unit
and plug the power adapter into any power outlet.
3.
Place the receiver either on top or near your TV. Rotate the antenna to a
vertical position.
4.
Set your TV to VIDEO INPUT mode to view your camera.
5.
For recording camera footage using your VCR, see advanced features.
WSE103
3
SVAT ELECTRONICS
Now You Can See
AVOIDING INTERFERENCE
The 2.4 GHz video signals pass easily through your home's interior walls, but the signal
may be reflected by power wires or plumbing inside the wall. If reception is poor, moving
the camera or receiver may fix this problem. Houses with steel frames may experience
interference as well. Microwave ovens, cordless phones and wireless routers are the
most common source of interference. Try to avoid mounting the receiver near these or
other sources of RF interference.
ADVANCED FEATURES
Multi-Camera Operation
The WSE103 is designed to work with up to 3 cameras. Additional cameras are sold
separately (indoor - WSE103C / outdoor - WSE201C).
*IMPORTANT
When using more than one camera, make sure you assign each camera a specific
channel (1-3). The channel switch is located on the back of the camera.
Accordingly the DIP switch located on the back of the receiver should be adjusted to
reflect the channel in use.
WSE103
4
SVAT ELECTRONICS
Now You Can See
OPERATING MODES
The system can be set to operate in one of 2 modes: AUTO or MANUAL. The desired
operating mode can be selected using the buttons on the front panel of the receiver.
Auto
Pressing the AUTO button places the system into auto mode. In this mode, the system
automatically cycles through all active cameras. When a camera detects motion above
the preset level, your television will display the picture from that camera for a few
seconds, and the beeper will sound. To avoid searching the channels that do not have
cameras/transmitters assigned to them, set those corresponding dip switches (located on
the back panel of the receiver) to the OFF position.
The dwell/cycle time (time taken to switch between cameras) is preset to four seconds
and can be adjusted between 2-30 seconds. To adjust the dwell/cycle time, press both
the AUTO and MANUAL buttons at the same time for each second you would like to add.
Release the buttons, and the LED light will flash green for each second that was added
to the dwell time. Increasing the dwell/cycle time past 30 seconds will revert it back to 2
seconds.
Manual
To view a specific camera on the receiver, press the MANUAL button. The receiver will
switch to a different camera each time the MANUAL button is pressed. There are 3 LEDs
on the front of the receiver, and the appropriate LED will light up to indicate the camera
that is active. For example, if you press the manual button to view camera 2, the middle
LED will be lit. To avoid searching the channels that do not have cameras assigned to
them, set those corresponding dip switches (located on the back panel of the receiver) to
the OFF position.
CONNECTING TO A VCR
You can connect a VCR to the system to allow recording of your camera footage. To
connect the receiver to a VCR for recording purposes, use the RCA adapter cable and
connect the appropriate ends to the A/V Out jack on the receiver, and the other
corresponding ends to the audio and video inputs of the VCR.
WSE103
5
SVAT ELECTRONICS
Now You Can See
TROUBLESHOOTING
If you are having trouble operating this product, please consult the guide below
Problem
Solution
No camera picture
1.
2.
2.
Blank TV screen
1.
2.
3.
4.
5.
Interferance on camera
picture
1.
2.
3.
Check all connections and AC adapters.
Ensure camera(s) and receiver are set to
correct channels.
Make sure camera is within range of
the receiver.
Make sure the receiver is switched ON.
Make sure the AC adapter is plugged in
If using batteries for the camera, make sure
they are charged.
Make sure your TV is set to the Video
Input channel.
Ensure the RCA plugs are connected to both
the receiver and the back of your TV/VCR.
Make sure each camera is within range, and
that no obstructions are blocking the signal.
Try repositioning the camera, receiver, or both
to improve the reception quality.
Reposition other nearby equipment
transmitting on the 2.4 GHz frequency.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
WSE103
6
SVAT ELECTRONICS
Now You Can See
SPECIFICATIONS
INDOOR RECEIVER
Number of Cameras Supported ....................3
Wireless Frequency........................................2.4GHz
Channel Frequencies ....................................2.414, 2.432, 2.468
Motion Activated Alert ....................................No
Audio Activated Alert ......................................No
Output terminal ..............................................4 PIN DIN to RCA
Auto-Scanning ................................................Yes
Housing Material ............................................ABS plastic
Housing Color ................................................Graphite Grey
Operating temperature .................................. -40F ~ 1040F
Operating Humidity ........................................Less than 85%
Receiver Power Input ....................................DC 9V 300mA
Power Adapter Input ......................................AC 120V 60Hz
Dimensions ....................................................3.25" x 1.0" x 5.0"
Weight ............................................................0.32 lbs
INDOOR CAMERA
Image sensor..................................................1/4" Color CMOS
Outdoor use....................................................No
IP Rating ........................................................N/A
Maximum Wireless Range
Optimum Wireless Range
(Line of Sight)
..........300 ft
(Line of Sight) ............100
ft
Wireless Frequency........................................2.4GHz
Wireless Channel Frequencies ......................2.414, 2.432, 2.468
Resolution ......................................................360 Horizontal TV Lines
Night Vision ....................................................No
Number of IR LEDs and Range ....................N/A
IR LED control ................................................No
Min. Illumination ............................................2 lux
Battery Operable ............................................Yes, 9V
Viewing Angle ................................................50 Degrees
TV System......................................................NTSC
WSE103
7
SVAT ELECTRONICS
Now You Can See
Focal Length ..................................................6.0 mm
Focus Type ....................................................Fixed Focus
Microphone ....................................................No
Motion Detection ............................................No
Audio Activation..............................................No
Sun Shield ......................................................No
Housing Material ............................................ABS plastic
Housing Color ................................................Midnight Black
Electronic shutter speed ................................1/60-1/15,000 sec
Signal/Noise Ratio..........................................48dB
Power LED Indicator ......................................No
Camera Bracket ............................................Yes
Operating temperature ..................................-40F to 1040F
Camera Power Input ......................................DC 9V 300mA
Power Adapter Input ......................................AC 120V 60Hz
Dimensions ....................................................0.82" x 0.82" x 1.10"
Weight ............................................................0.44lbs
WSE103
8
SVAT ELECTRONICS
Now You Can See
NOTES
WSE103
9
SVAT ELECTRONICS
Now You Can See
SVA
SVAT SUPPORTS CRIME STOPPERS
STOPPERS
Crime Stoppers programs are operated as non-profit charities and are managed by a
volunteer board of directors who raise funds and pay rewards to individuals who
anonymously call with information that helps solve crime.
Rewards are paid for tips that lead to the arrest and indictment of people charged with
felony offences, and to date Crime Stoppers statistics show a conviction rate of
approximately 95%.
CRIME STOPPERS INTERNATIONAL
P.O. Box 614
Arlington, Texas
U.S.A 76004-0614
PLACE
POSTAGE
HERE
To receive more information about Crime Stoppers or to make a charitable donation
please fill in the fields on the back of this page, cut on the dotted line and mail in.
WSE103
www.svat.com
SVAT ELECTRONICS
Now You Can See
SVA
SVAT SUPPORTS CRIME STOPPERS
STOPPERS
To receive more information about Crime Stoppers or to make a charitable donation
please fill in the fields below, cut on the dotted line and mail in.
CRIME STOPPERS INTERNATIONAL
Crime Stoppers International is an organization of community based civilian Crime Stoppers
programs, which assist police in solving crime. You can find more information about
Crime Stoppers at www.c-s-i.org
Local Crime Stoppers programs are partnerships between the public, media and local policing
organizations. Each program is run by a citizen board, whose purpose is to advertise a local
telephone number, which anonymous persons can call with information regarding a crime. Callers
(tipsters) may be eligible for a cash reward for their information.
If your community does not have a Crime Stoppers program and would like information about
starting one, return this card with the following information.
CITY:________________________________________
NAME:_____________________________________________ PHONE:_____________________________________
ADDRESS:_________________________________________
PROV/STATE:__________________ COUNTRY:_____________________ POSTAL/ZIP CODE:__________________
E-MAIL ADDRESS:_________________________________________________________________________________
Charitable donations can be made to “CSI” by returning this card in an envelope with your check or money order to
the address on the other side.
Amount $__________________
THANK YOU
www.svat.com
WSE103
SVAT ELECTRONICS
Now You Can See
WSE103
www.svat.com
SVAT ELECTRONICS
Now You Can See
www.svat.com
Disclaimer
S VAT d o e s n o t e n d o r s e a n y o f S VAT p r o d u c ts f o r a n y i l l e g a l
a c t i v i t i e s . S VAT i s n o t r e s p o n s i b l e o r l i a b l e i n a n y w a y
s h a p e o r f o r m f o r a n y d a m a g e , v a n d a l i s m , t h e ft o r a n y
o t h e r a c t i o n t h a t m a y o c c u r w h i l e a S VAT p r o d u c t i s i n u s e
b y t h e p u r c h a s e r.
Model #
WSE103
www.svat.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising