10/100 Fast Ethernet PCI Adapter
10/100 Mbps Ethernet, 32-bit CardBus
EtherFast Integrated PC Card
Model No: SP160T
1. Features
Congratulations on purchasing your new SP160T 10/100
Mbps Integrated PC Card. This document introduces the
features and how to install and use the PC Card.
•
Integrates RJ-45 connector into the PCMCIA card
•
Complies with PCMCIA Release 2.1 specifications
and later
•
Complies with IEEE 802.3 10Base-T and 802.3u
100Base-TX
•
PC Card standard 68-pin 32-bit CardBus interface
•
Supports Nway auto-negotiation for 10/100 Mbps
full/half-duplex
•
Support all popular Network Operating Systems
•
“Hot Swap” card insertion and removal
•
Link and Active LEDs
2. Package Contents
Please ensure that the following items are included in
your package. If any items are missing, contact your
dealer.
•
SP160T, 10/100 Mbps Ethernet Integrated PC Card
•
Driver diskette
•
Installation guide
LINK/ACT LED
10/100 LED
RJ-45
SP160T 10/100 Mbps Ethernet Adapter
1
3. Driver installation for Windows 98
1.
Insert the PCMCIA Ethernet Card into an available
PCMCIA slot on your notebook.
2.
After Windows 98 detects the PCMCIA Ethernet
Card, the Add New Hardware Wizard window
appears.
3.
Click Next to continue the installation. A screen
appears prompting you to select an installation
method.
4.
Select Search for the best driver for your device
and click Next.
5.
Insert the driver disk and let Windows 98 search
floppy disk drive only. Click Next to continue.
2
6.
A screen appears telling you that it has located the
PCMCIA Ethernet Card driver. Click Next.
Windows will copy files to the hard drive.
7.
Then, click Finish to finish driver installation. And
you should reboot your system to complete the
installation.
3
4. Driver installation for Windows 2000
1.
Insert the PCMCIA Ethernet Card into an available
PCMCIA slot on your notebook.
2.
After Windows 2000 detects the PCMCIA Ethernet
Card, the Found New Hardware Wizard window
appears.
3.
Click Next to continue the installation. A screen
appears prompting you to select an installation
method.
4.
Select Search for a suitable driver for my device
(recommended) and click Next.
5.
Ensure that the Specify a location box is checked.
Click Next.
4
6.
Type “ A:\WIN2000” where “A” is your floppy
diskette drive letter. Insert the driver disk, and
click OK.
7.
Click Next to continue.
8.
The Digital Signature Not Found window appears.
Click Yes to continue.
5
P/N: 50001-121640
9.
Click Finish to complete the PCMCIA Ethernet
Card installation.
10. You should reboot the computer to insure a
successful installation.
6
Note
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising