PSU INSTALLATION INSTRUCTIONS

PSU INSTALLATION INSTRUCTIONS
PSU INSTALLATION INSTRUCTIONS
The PSU can be suspended using a Ceiling Plate CP1, Tube Mount TM05 or Girder Clamp GC25 and drilled
column of various lengths. There are 2 types of PSU, standard and cradle. On the standard version the PSU
is screwed into the base of the projector using original projector fixings or screws provided with the PSU.
Some projectors have to have their feet removed to gain access to the fixing hole. On the cradle version the
projecotr is placed in the cradle, either the correct way up or in some circumstances inverted.
All PSU's have full swivel and tilt, achieved by friction and once correctly adjusted will remain as set.
Close to ceiling installations can be achieved using a Pegged Ceiling Plate CP3,
which fits directly to the PSU socket. Alternatively the CP1CF has no sockets
and fits directly onto the PSU cross bar.
Installations requiring special mounting solutions can be
assessed and quoted for.
SUSPENDED INSTALLATION
CP1
1. Establish the required projector to screen distance and fix the
Ceiling Plate to the ceiling through the holes provided using suitable
fixings (not supplied).
SAFETY. We recommend installation by a Qualified Tradesperson,
using masonry plugs or other reliable fixings to ensure safe installation.
- Consult your builder or architect if in doubt.
2. Connect the column into the Ceiling Plate socket using
the throughbolt - tighten completely.
3. Undo the 2 hex-headed bolts at either side of the PSU
and detach the 2 parts. Fix the top part (with socket) into
the column using the throughbolt - tighten all
throughbolts and allen screws completely.
Column
STANDARD PSU
4. Fix the bottom part of the PSU to the projector using
the fixing screws and refit the 2 parts of the PSU.
Adjust for tilt and tighten.
CRADLE PSU
5. Place the projector in the cradle part of the PSU and refit
the 2 parts of the PSU. Adjust for tilt and tighten.
Electrical and signal cables can be routed through the column.
PSU
Typical Standard
Mount Shown
PSU
Typical Cradle
Mount Shown
COL
If you require further information call 01865 767676
UNPSU1102
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising