Indoor Accessories Remote Lighting Lifter IA

Indoor Accessories Remote Lighting Lifter IA
application
specifications
• The PFI-100 Remote Lighting Lifter can remotely
raise and lower luminaires that are positioned as
high as 82 feet in the air.
• This unit also supplies the power to the luminaire
and automatically turns it off when the luminaire
begins to lower.
• Luminaires can be programmed to lower to
specific heights or all the way to the floor.
• Safety design automatically stops lowering when
luminaire comes in contact with any object.
• Lifting Weight : 110-220 lbs
• Lifting Distance : 82 ft.
• Number of Lifting Wires : 4
• Voltage : 120/277
• Net Weight of Lifter : 55 lbs
• Rated Current of Illuminator : 64 A
• Type of Electric Motor : BLDC
• Speed : 16.4 ft/min
• Lifting Wire OD : 3.0 mm
construction and features
• The Lighting Lifter works with a hand held remote
or with low voltage wiring.
• The Lighting Lifter can be 120 or 277 volt and
supplies voltage to the fixture.
• The power is not turned on to the fixture until the
lifter is in the “Home” position and the contacts
are fully engaged. This eliminates any possible
sparking and makes sure the electrical contacts do
not wear out.
• The circular contacts ensure they always make
contact when the lifter rises to the “Home”
position.
• The Lifter can be programmed to stop at any
height the customer desires.
• The Lighting Lifter can be operated one at a time,
in groups, or the whole room all at once.
• The “remote control” can be used to turn the
lights on and off while connected to the lifter.
• A special “locking system” holds the tension off the
cable when the lowering device is in the “Home”
position. This is a safety device to prevent the
system from accidentally lowering.
• The Lighting Lifter is ETL approved.
Ordering: see the Lighting Lifter Quote Request Form to order
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
IA-19050 03/13 IA-19050
Indoor Accessories
Remote Lighting Lifter
PFI-100
Specifier’s Reference
Project
Type
Model No.
Comments
IA-19050
dimensions
Remote Lighting Lifter PFI-100
15-5/16"
(388.9mm)
15-5/16"
(388.9mm)
15-1/4"
23-7/8"
(606.4mm) (387.4mm)
11-1/2"
(292.1mm)
© 2013 Koninklijke Philips Electronics N.V. All rights reserved.
Specifications are subject to change without notice.
www.philips.com/luminaires
IA-19050 03/13 Philips Lighting Company
200 Franklin Square Drive
Somerset, NJ 08873
Phone: 855-486-2216
Philips Lighting Company
281 Hillmount Road
Markham ON, Canada L6C 2S3
Phone: 800-668-9008
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising