Position Board Utility2 Installation Instructions

Position Board Utility2
Installation Instructions
Introduction
Thank you for purchasing Position Board Utility2.
This document explains how to install and uninstall
(Note-1)
Position Board Utility2
. Please read carefully before
installing the product to your personal computer.
(Note-1): Position Board Utility2 includes position board device
driver, position board API library, and position board
test tool that can execute the development of control
application and operation confirmation for Mitsubishi
Electric position board MR-MC2
.
Acknowledgements
• Reprinting or reproducing the part or all the contents of this
document in any form for any purpose without the permission of
Mitsubishi Electric Corporation is strictly forbidden.
• Although we have made the utmost effort to follow the revisions
of the software and hardware, in some cases, unsynchronized
matter may occur.
• The information in this document may be subject to change
without notice.
• We do not take any responsibility for the virus infection and
network failure caused by temporary deactivation of antivirus or
security software.
Product Makeup
Quantity
computer
1.Insert the CD-ROM to the CD-ROM drive. Double-click "Setup.exe"
Contents
®
®
Microsoft Windows supported personal computer
1
Microsoft Windows 8.1 English version (64-bit/32-bit)
1
Microsoft Windows 8 English version (64-bit/32-bit)
Software license agreement
1
• We do not guarantee any commercially available Microsoft
Windows Operating System products that are introduced in this
manual.
• This software's copyright is owned by Mitsubishi Electric
Corporation.
• This software requires one license per computer to be purchased.
However, only position board API library and position board device
driver could be used for royalty free.
• This product (including manual) can be used under the Software
License Agreement only.
• We do not take any responsibilities for the consequences of
operating this product (including manual).
• User's Manual in the CD-ROM is a PDF file. To View the PDF file,
®
®
Adobe Reader is required. Download from the Adobe Systems
Incorporated website.
• Log on to a personal computer as a user having an attribute of "Administrator" (Computer administration).
• Terminate all the applications running under Microsoft Windows Operating System before installation.
• Install this product before connecting a personal computer and a position board via PCI/CompactPCI/PCI Express BUS interface or
USB interface.
• When using antivirus or security software, the warn appears and you may not be able to install. Deactivate temporarily antivirus or
security software before installation.
information.
Position Board Utility2 CD-ROM
Precautions
Confirm before installation
2.Following the instructions on the screen, select or enter the necessary
Installation Instructions (This manual)
Personal computer main body
MRZJW3-MC2-UTL
Item
Personal
Product name
Install Position Board Utility2 to a personal computer.
(Otherwise, it is displayed as "setup".) in the CD-ROM.
Operating Environment
Model name
Installation
Microsoft Windows 7 English version (64-bit/32-bit)
OS
[Service Pack 1]
®
Microsoft Windows Vista English version (32-bit)
[Service Pack 2]
Precautions
• When using Windows 8.1/ Windows 8/Windows 7/Windows Vista, the User Account Control screen appears if user account control is
enabled. Click "Yes" or Allow".
When using Windows 8.1/ Windows 8/
Windows 7
When using Windows Vista
1.Select "Yes".
1.Select "Allow".
®
Microsoft Windows XP English version (32-bit)
[Service Pack 3]
Desktop PC:
®
CPU
®
Intel Celeron Processor 2.8GHz or higher
Laptop PC :
®
Intel Pentium M Processor 1.7GHz or higher
Required
1GB or more recommended (For 32-bit edition)
memory
2GB or more recommended (For 64-bit edition)
When installing Position Board Utility2:
Available hard
Available hard disk space : 1GB or more
disk space
When operating Position Board Utility2:
Available virtual memory space : 512MB or more
Disk drive
CD-ROM supported disk drive
Monitor
Resolution 1024 x 768 pixels or higher
Communication
PCI/CompactPCI /PCI Express BUS
interfaces
USB port
®
®
Precautions
(1) The following functions cannot be used when the computer is
running under Microsoft Windows 8.1, Microsoft Windows 8,
Microsoft Windows 7, Microsoft Windows Vista, Microsoft
Windows XP. This product may not perform properly when these
functions are used.
• Activating the application with Windows compatible mode
• Simplified user switch-over
• Remote desktop
• Large fonts (Detail settings of screen property)
• DPI setting other than that of the normal size (Detail settings of
screen property)
(2) In Windows 8.1/Windows 8/Windows 7/Windows Vista, log in as
a user having User authority or higher.
(3) The following functions cannot be used when the computer is
running under Windows 7.
• Windows XP Mode, Touch
(4) The following functions cannot be used when the computer is
running under Windows 8.1/Windows 8.
• Hyper-V, Modern UI Style, Touch
BCN-B62008-303D
PBUTL2-I-INSE
• If the following messages are displayed several times before completing the installation of this product, the device driver must be installed.
• If the device driver is not installed, connection may be partly interrupted. In this case, reinstall Position Board Utility2.
When using Windows 8.1/Windows 8/
Windows 7/Windows Vista
When using Windows XP
1.Select "Install this driver software anyway" and install the
1.Select "Continue Anyway" and install the device driver.
device driver.
Continue to the Backside
BCN-B62008-303D
PBUTL2-I-INSE
• If an overwrite install has been done to upgrade the version of Position Board Utility2 when using Windows 8.1/Windows 8/
Windows 7/Windows Vista, the following message may be displayed. In this case, select "This program installed correctly".
Installing the PCI/CompactPCI/PCI Express device driver
When using Windows XP, in order to connect with a position board via PCI/CompactPCI/PCI Express BUS interface, the
PCI/CompactPCI/PCI Express device driver needs to be installed. When using Windows 8.1/Windows 8/Windows
7/Windows Vista, the PCI/CompactPCI/PCI Express device driver is automatically installed.
When using Windows 8.1/Windows 8/
®
Windows 7/Windows Vista
When using Windows XP
1.The "Found New Hardware Wizard" appears when connecting the position
board to the personal computer only for the first time. The same screen
appears when the slot to be connected is changed.
2.The "Welcome to the Found New Hardware Wizard" dialog may appear. In
this case, select "No, not this time".
3.The "This wizard helps you install software for." dialog appears. Select "Install
the software automatically [Recommended]".
4.The "The Wizard has finished installing the software for." dialog appears. The
1.Select "This program installed correctly".
installing of the PCI/CompactPCI/PCI Express device driver completes by
clicking "Finish".
• The "Found New Hardware Wizard" may temporarily appear during the installation. This occurs for requesting a device registration to
Windows, and this screen will disappear automatically after the completion of the registration processing of Windows. At this time,
never execute any operation to the "Found New Hardware Wizard".
• When using Windows Vista/Windows XP, by not installed, the "Found New Hardware Wizard" may appear, when turning on the power
supply of personal computer connecting a position board. In this case, select "Cancel" for all, although the screen appears only the
number of the connected position boards that have not been recognized.
When using Windows Vista
When using Windows XP
Installing the USB device driver
When using Windows XP, in order to connect with a position board via USB interface, the USB device driver needs to be
installed. When using Windows 8.1/Windows 8/Windows 7/Windows Vista the USB device driver is automatically installed.
When using Windows XP
1.The "Found New Hardware Wizard" appears when connecting the USB of the
position board to the personal computer only for the first time. The same
screen appears when the USB port to be connected is changed.
2.The "Welcome to the Found New Hardware Wizard" dialog may appear. In this
case, select "No, not this time".
3.The "This wizard helps you install software for." dialog screen appears. Select
"Install the software automatically [Recommended]".
4.The dialog of Windows Logo Test appears. The installing of the USB device
driver completes by clicking "Continue Anyway".
1.Select "Cancel".
1.Select "Cancel".
Uninstallation
Uninstall Position Board Utility2 from a personal computer.
1.Execute the Position Board Utility2 uninstallation from the control panel of
Windows.
Microsoft, Windows, Windows Vista, and Windows XP are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
Celeron, Intel, and Pentium are either registered trademarks or trademarks of Intel Corporation in the United States and/or other countries.
PCI Express is either a registered trademark or trademark of PCI-SIG.
CompactPCI is a registered trademark of PCI Industrial Computer Manufacturers Group.
Adobe, Acrobat, and Reader are either a registered trademark or trademark of Adobe Systems Incorporated in the United States and/or other countries.
The company names, system names and product names mentioned in this manual are either registered trademarks or trademarks of their respective
companies.


In some cases, trademark symbols such as ' ' or ' ' are not specified in this manual.
BCN-B62008-303D
PBUTL2-I-INSE
BCN-B62008-303D
PBUTL2-I-INSE

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project