Category 6 UTP Copper Cabling System Selection Guide

Category 6 UTP Copper Cabling System Selection Guide
Category 6 UTP Copper Cabling System Selection Guide
System
requirements:
• Category 6 Copper Cabling Systems provides headroom assurance that
exceed requirements of ANSI/TIA-568-C.2 Category 6, and ISO 11801
Class E channel standards
• Jack modules are 100% tested to ensure NEXT and RL performance and are
individually serialized for traceability; utilize patent-pending enhanced Giga-TX™
Technology for jack terminations; optimizes performance by maintaining cable pair
geometry and eliminating conductor untwist
• Patch cords are 100% performance tested and wired T568B; constructed of 24 or
28 AWG stranded, UTP copper cable and modular plugs for superior performance;
nominal cable diameter is 0.235 in (6.0mm) for 24 AWG and 0.150 in (3.8mm) for
28 AWG
• Modular patch panels accept all Mini-Com® Modules; angled patch panels facilitate
proper bend radius control and minimize the need for horizontal cable managers
Part Number
Jack Module
Category 6 Mini-Com® TX6™ PLUS UTP Jack Module.
1
10
CJK688TGBU
Category 6 Mini-Com® TX6™ PLUS UTP, Keyed, Jack Module.
1
10
CJR688TG**
Category 6 Mini-Com® TX6™ Plus UTP Right Angle Jack Module.
1
10
CJH688TG**
Category 6 Mini-Com® TX6™ Plus UTP Shuttered Jack Module.
1
10
CJT688TG**
Category 6 Mini-Com® TX6™ Plus UTP 28/30AWG Jack Module.
1
10
CJE688TG**
Category 6 Mini-Com® TX6™ Plus UTP Corrosive Resistant
Jack Module.
1
10
Category 6, 24 AWG UTP patch cord with TX6™ Modular Plugs
on each end.
1
10
Category 6, 28 AWG, UTP patch cord with TX6™ Modular Plugs
on each end.
1
10
Category 6, 24 AWG keyed, UTP patch cord with TX6™ PLUS
Keyed Modular Plug on one end and TX6™ PLUS Non-Keyed
Modular Plug on the other end.
1
10
48-port, angled, modular patch panel with rear mounted
faceplates. 1 RU.
24-port, angled, flush mount patch panel supplied with rear
mounted faceplates. 1 RU.
48-port, angled, high density modular patch panel with enhanced
labeling features. 1 RU.
48-port, angled, flush mount patch panel supplied with rear
mounted faceplates. 2 RU
1
10
1
10
1
10
1
10
48-port, high density modular patch panel with rear mounted
faceplates. 1 RU.
24-port flush mount patch panel supplied with rear mounted
faceplates. 1 RU.
48-port, high density modular patch panel with enhanced labeling
features. 1 RU.
48-port flush mount patch panel supplied with rear mounted
faceplates. 2 RU.
1
10
1
10
1
10
1
10
Right Angle Jack Module
Shuttered Jack Module
28/30AWG Jack Module
Corrosive Resistant Jack Module
UTP Patch Cord
UTPSP**Y
28 AWG UTP Patch Cord
UTP28SP**
Keyed UTP Patch Cord
UTPKSP**
Angled Modular Patch Panels
CPPA48HDWBLY
CPPA24FMWBLY
CPPA48HDWBLY
CPPA48HDEWBL
CPPA48FMWBLY
Flat Modular Patch Panels
CPP48HDWBLY
CPP48HDEWBL
Std.
Ctn.
Qty.
CJ688TGIW*
Keyed Jack Module
CJ688TGIW
Part Description
Std.
Pkg.
Qty.
CPP24FMWBLY
CPP48HDEWBL
CPP48FMWBLY
*Contact Customer Service or visit www.panduit.com for available standard module colors and/or patch cord colors
and lengths.
^One rack space = 1.75" (44.45mm).
Category 6 UTP Copper Cabling System Selection Guide
Part Number*
Part Description
TX6500™ Premium Category 6 U/UTP Copper Cable
Flammability
Rating
Color
Length
Region
Availability
PUP6504BU-UY
Category 6 premium, plenum (CMP), 4-pair,
U/UTP copper cable. Conductors are 23 AWG
construction with FEP insulation, twisted in pairs,
separated by an integrated pair divider and
protected by a low smoke, flame-retardant
PVC (CMP) jacket.
CMP
Blue
1,000
ft./
305m
North
America
PUR6504BU-UY
Category 6 premium, riser, (CMR), 4-pair,
U/UTP copper cable. Conductors are 23 AWG
construction with polyolefin insulation, twisted in
pairs, separated by an integrated pair divider and
protected by a flame-retardant PVC (CMR) jacket.
CMR
Blue
1,000
ft./
305m
North
America
PUP6004BU-W
Category 6 enhanced, plenum (CMP), 4-pair
U/UTP copper cable. Conductors are 23 AWG
construction with FEP/polyolefin insulation,
twisted in pairs, separated by an integrated
pair divider and protected by a low smoke,
flame-retardant PVC (CMP) jacket.
CMP
Blue
1,000
ft./
305m
North
America
PUR6004BU-W
Category 6 enhanced, plenum (CMR), 4-pair
U/UTP copper cable. Conductors are 23 AWG
construction with FEP/polyolefin insulation,
twisted in pairs, separated by an integrated
pair divider, and protected by a flame-retardant
PVC (CMR) jacket.
CMP
Blue
1,000
ft./
305m
North
America
PUL6004WH-FE
Category 6 enhanced, low smoke zero halogen,
(LSZH-1), 4-pair U/UTP copper cable. Conductors
are 23 AWG construction with polyethylene
insulation, twisted in pairs, separated by an
integrated pair divider and protected by a
flame-retardant (LSZH-1) jacket.
LSZH-1
White
1,000
ft./
305m
Latin
America,
Asia Pacific
PUL6004WH-KE
Category 6 enhanced, low smoke zero halogen
(LSZH-1) 4-pait copper cable. Conductors are
23 AWG construction with polyethylene insulation,
twisted in pairs, separated by an integrated pair
divider and protected by a flame-retardant
(LSZH-1) jacket.
LSZH-1
White
1,000
ft./
305m
EMEA
PUZ6004WH-CEG
Category 6 enhanced, low smoke zero halogen
(LSZH-3), 4-pair U/UTP copper cable. Conductors
are 23 AWG construction with polyethylene
insulation, twisted in pairs, separated by an
integrated pair divider, and protected by a
flame-retardant (LSZH-3) jacket.
LSZH-3
White
1,000
ft./
305m
Latin
America,
Asia Pacific,
EMEA
PUC6004BU-FE
Category 6 enhanced, (CM), 4-pair U/UTP copper
cable. Conductors are 23 AWG construction with
polyolefin insulation, twisted in pairs, separated
by an integrated pair divider, and protected by a
flame-retardant PVC (CM) jacket.
CM
Blue
1,000
ft/
305m
Latin
America,
Asia Pacific,
EMEA
PUR6004BU-FE
Category 6, riser (CMR), 4-pair, U/UTP copper
cable. Conductors are 23 AWG construction with
polyolefin insulation, twisted in pairs, separated
by an integrated pair divider, and protected by a
flame-retardant PVC (CMR) jacket.
CMR
Blue
1,000
ft. /
305m
Latin
America,
Asia Pacific
TX6000™ Enhanced Category 6 U/UTP Copper Cable
*Contact Customer Service for region availability and other cable colors.
(continued on next page)
Category 6 UTP Copper Cabling System Selection Guide
Flammability
Rating
Color
Part Description
PUP6C04BU-U
Category 6, plenum (CMP), 4-pair, U/UTP copper
cable. Conductors are 23 AWG construction
with FEP/polyolefin insulation, twisted in pairs,
separated by a tape, and protected by a low
smoke, flame-retardant PVC (CMP) jacket.
CMP
Blue
1,000
ft./
305m
North
America
PUR6C04BU-U
Category 6, riser (CMR), 4-pair, U/UTP copper
cable. Conductors are 23 AWG construction with
polyolefin insulation, twisted in pairs, separated by
a tape, and protected by a flame-retardant PVC
(CMR) jacket.
CMR
Blue
1,000
ft./
305m
North
America
PUL6C04WH-CE
Category 6 enhanced, low smoke zero halogen
(LSZH-1), 4-pair U/UTP copper cable. Conductors
are 24 AWG construction with polyethylene
insulation, twisted in pairs, separated by an
integrated pair divider, and protected by a
flame-retardant (LSZH-1) jacket.
LSZH-1
White
1,000
ft. /
305m
Latin
America,
Asia Pacific
PUL6C04WH-KE
Category 6 enhanced, low smoke zero halogen
(LSZH-1), 4-pair U/UTP copper cable. Conductors
are 24 AWG construction with polyethylene
insulation, twisted in pairs, separated by an
integrated pair divider, and protected by a
flame-retardant (LSZH-1) jacket.
LSZH-1
White
1,000
ft./
305m
EMEA
PUC6C04BU-CE
Category 6 enhanced, (CM), 4-pair U/UTP copper
cable. Conductors are 24 AWG construction with
polyolefin insulation, twisted in pairs, separated
by an integrated pair divider, and protected by a
flame-retardant PVC (CM) jacket.
CM
Blue
1,000
ft./
305m
Latin
America,
Asia Pacific,
EMEA
PUR6C04BU-C
Category 6, Riser (CMR), 4-pair, U/UTP copper
cable. Conductors are 24 AWG construction with
polyolefin insulation, twisted in pairs, separated
by a tape, and protected by a flame-retardant
PVC (CMR) jacket.
CMR
Blue
1,000
ft./
305m
Latin
America,
Asia Pacific
PUP6C2804BU-U
Category 6, plenum (CMP), 4-pair, U/UTP copper
cable. Conductors are 28 AWG construction
with FEP/polyolefin insulation, twisted in pairs,
separated by an integrated pair divider, and
protected by a low smoke, flame-retardant
PVC (CMP) jacket
CMP
Blue
1,000
ft./
305m
North
America
PUR6C2804BU-U
Category 6, riser (CMR), 4-pair, U/UTP copper
cable. Conductors are 28 AWG construction with
polyolefin insulation, twisted in pairs, separated
by an integrated pair divider, and protected by
a flame-retardant PVC (CMR) jacket.
CMR
Blue
1,000
ft./
305m
North
America
PUD6C2804BU-CE
Category 6, low smoke zero halogen
(LSZH-1, LSZH-3) and (CM), 4-pair,
U/UTP copper cable. Conductors are 28 AWG
construction with polyethylene insulation, twisted
in pairs and protected by a flame-retardant
(LSZH-1, LSZH-3, CM) jacket.
LSZH-1
LSZH-3
CM
Blue
1,000
ft./
305m
Latin
America,
Asia Pacific,
EMEA
TX6™ Category 6 U/UTP Copper Cable
Length
Region
Availability
Part Number*
TX6-28™ Category 6 28 AWG U/UTP Copper Cable
*Contact Customer Service for region availability and other cable colors.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800-777-3300
©2017 Panduit Corp.
ALL RIGHTS RESERVED.
COSG13--WW-ENG
1/2017
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising