NovelSat NSR9100/NSR9800 N+1 Redundancy Switch Series

NovelSat NSR9100/NSR9800 N+1 Redundancy Switch Series
NovelSat NSR9100 N+1 Redundancy Switch
NovelSat NSR9800 N+1 Redundancy Switch
NovelSat NSR9100/NSR9800
N+1 Redundancy Switch Series
The NovelSat N+1 Redundancy Switch
solution enables hot standby redundancy
for up to 8 NovelSat modulators,
demodulators or modems. The N+1
switch supports RF switching as well as
terrestrial interfaces switching.
The redundancy switching system
monitors the ‘health’ of the protected
units and, in case of an alarm, copies the
failed unit’s configuration to the redundant
unit and automatically replaces the faulty
unit’s functions with the spare (+1) unit.
Key Features
•Supports switching of modulator, demodulator
and modem
•Support from 1+1 up to 8+1 units
•Automatic or manual backup switching mechanism
•Automatic or manual unit recovery
•Automatic or manual configuration file transfer
and recovery
•Full redundancy of all ports (RF and terrestrial)
•Alarm status front panel indications
•Dual Power Supply (110/220v AC or -48v DC)
•Management & Control via Web GUI, CLI, SNMP and
front panel
The redundancy switch can support
from 1+1 configuration using the
NSR9100 1U chassis and up to 8 + 1 with
a single NSR9800 3U chassis (up to 3
supported ports).
•All protected TX ports include power monitoring
•Extractable switching cards
•Supports additional expansion units
•Optional telecom switching cards (E1, E3)
NSR9100 vs NSR9800 Configuration Support
Both the NovelSat NSR9100 and NSR9800 redundancy switch are designed for flexibility, enabling various
configurations depending on which ports (interfaces) require coverage (L band TX, L band RX, IF band, ASI, GbE, TSoIP).
NSR9100 (1U chassis) Supported Configurations
NSR9800 (3U chassis) Supported Configurations
Backup Interfaces
Backup Interfaces
Product
Redundancy
Configuration
NS1000
Modulator
NS1000
Modulator
ASI 1
ASI 2
NS1000
Full support for any
interface combination
1:1
Up to 4:1
1:1
Full support for any
interface combination
NS2000
Demodulator
Up to 4:1
Any one of three
Interfaces
1:1
Any two out of three
Interfaces
Redundancy
Configuration
ASI 1
ASI 2
GbE
Up to 8:1
Full support for any
interface combination
NS2000
Demodulator
Up to 8:1
Full support for any
interface combination
NS3000/
NS300X
Up to 4:1
Full support for any
interface combination
NS3000/
NS300X
Up to 8:1*
Any one of three
Interfaces
Modulator
Any one of three
Interfaces
NS2000
Demodulator
NS3000/
NS300X
Product
GbE
*More than one interface requires an additional NS9100 or NS9800 unit.
Two NSR9x00 Redundancy Units can be cascaded
to expand support for additional (more than 8)
components – Modulators, Demodulators, and Modems.
NovelSat NSR9100/NSR9800 Specifications
Specifications
L band frequency range
IF band range
Input power
Power monitoring
DC path through
Dimensions (mm)
Certification
950-2400MHz
50-180MHz
Up to +20dBm
Down to -35dBm
Standard up to 18V/1A
1:1 card L band TX port up to 48V/4A (BUC feeding support)
1U: H: 43, W: 439 L: 440
3U: H: 130, W: 439 L: 317
CB, TUV, CE
Unit LEDs
PS1, PS2
Alarm
Auto
Manual
Remote
Alarm R to 8
Protected R to 8
Power supply status indications
General unit alarm
Unit operating in automatic mode
Unit is operating in manual mode
Unit is controlled from remote
Operational units alarm status
Green no alarm
Red reporting alarm
Off – not connected
Operational units protection status
Green – can be protected
Red – not protected
Orange – is replaced by redundant unit
Off – masked
Related NovelSat products: NS3000 Professional High-Data Rate Satellite Modem (up to
850Mbps), NS300X IP Satellite Modem (up to 30Mbps), NS1000 Satellite Modulator, NS2000
Satellite Demodulator.
5/2016
www.novelsat.com info@novelsat.com
Hayetzira 3, Raanana 4366348 Israel
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising