SMART kapp iQ 65 board specifications

SMART kapp iQ 65 board specifications
smarttech.com/docfeedback/170816
Specifications
SMART kapp iQ™ 65 board
Overview
With a SMART kapp iQ™ 65 board, you can capture notes and ideas, present
information and collaborate with others in simple but powerful ways.
Connect a Bluetooth®-enabled mobile device to the board by scanning the Quick
Response (QR) code on the board’s screen. When you first connect your mobile
device, you’re directed to the Apple App Store or Google Play™ to download the
SMART kapp® app. After installing the app, you can connect to your board and share
notes with others. You can write notes in black or red ink using the provided pens and
erase notes with the pens’ erasers or with your palm or fist.
The board’s 4K ultra-high-definition resolution display provides optimal image clarity and viewing from any angle.
See education.smarttech.com for more information about SMART kapp iQ.
Dimensions and weights1
Dimensions
Weight
138 lb. (62.4 kg)
38 1/2" (97.8 cm)
31 5/8" (80.4 cm)
Shipping dimensions (including pallet)
69 1/4" × 49 5/8" × 11 7/8"
(175.8 cm × 126.1 cm × 30.3 cm)
Shipping weight
182 lb. (82.4 kg)
56 1/4" (142.8 cm)
59 3/8" (150.8 cm)
4 3/4"
(12 cm)
1All dimensions ± 1/8" (0.3 cm). All weights ± 2 lb. (0.9 kg).
smarttech.com/kb/170816
1
SPECIFICATIONS
SMART KAPP IQ 65
Hardware
Interaction
Touch technology
DViT® (Digital Vision Touch) technology
Multitouch capabilities
8 touches 2
Object awareness
Behavior adjusts automatically to whatever tool or object is being used, whether it’s a pen,
finger, eraser or palm.
Pen ID™
Two people can write independently and simultaneously, using different colored ink.
Display
Type
LED
Aspect ratio
16:9
Optimal resolution
3840 × 2160 at 30 Hz (HDMI® input only)
Horizontal frequency
244–280 kHz (analog and digital)
Vertical frequency
24–120 Hz
Contrast ratio (typical)
1400:1
Brightness (maximum)
360 cd/m²
Pixel pitch
0.372 mm
Gamut
72% of NTSC
Viewing angle
178°
Response time (typical) 8 ms
Wireless technology
Bluetooth 4.0 dual mode (backwards compatible with Bluetooth 2.1 + EDR)
Capture options
Establish a Bluetooth wireless connection with a supported mobile device (see below) by
scanning the board’s unique QR code
Presence detection
Presence detection sensor on the bottom frame
Audio
10 W integrated side-firing speakers (×2)
Noise level
35 dBA
Included cables and
accessories
8' (2.4 m) country-specific power cable
16' 5" (5 m) USB cable3
Pen (×2)
Included hardware
AM30-ENT appliance
2Requires SMART Product Drivers to be installed, and some applications might not support 8 touches
3 HDMI cable not included (See Cable requirements for HDMI cable requirements.)
2
smarttech.com/kb/170816
SPECIFICATIONS
SMART KAPP IQ 65
Mounting holes
For a standard VESA® 400 mm × 400 mm mounting plate
13 3/4" (34.9 cm) from the bottom of the interactive flat panel
Mounting bracket depth
Minimum depth of 1 5/8" (4.2 cm) for all components on the back of the interactive flat panel to
clear the wall
Connectors
Side
Side connector panel:
USB 2.0 Type-B
HDMI 1.4 in
Stereo 3.5 mm out
RS-232 in
Bottom
USB 2.0 Type-A
Back
AC power inlet
AM30-EDU appliance:
USB 3.0 Type-A (×2)
USB 2.0 Type-B 4
USB 2.0 Type-B
HDMI 1.4 in
HDCP encrypted HDMI 1.4 out
RJ45
Installation requirements
Board
See the SMART kapp iQ boards administrator’s guide (smarttech.com/kb/171038)
SMART kapp app
Apple devices
iOS 8.1 or later operating system software
50 MB of storage
iPhone 4S or later
Third generation iPad or later
First generation iPad mini or later
Fifth generation iPod touch or later
Android™ devices
Android 4.4.4 (KitKat) or later operating system
50 MB of storage (internal or SD card)
1024 MB of RAM
720p or better screen resolution
Bluetooth 2.1 + EDR
3 megapixel or better rear-facing camera (recommended)
SMART kapp viewer
Mobile
Safari for iOS 8.1 or later operating system software
Chrome™ for Android 39.0.2171.93 or later
Desktop
Internet Explorer® 10 or later
Chrome 39.0.2171.95 or later
Firefox® 34.0.5 or later
Safari 8.0 or later
4 For service use only
smarttech.com/kb/170816
3
SPECIFICATIONS
SMART KAPP IQ 65
Room computers and guest laptops
General requirements
See smarttech.com/kb/170978
4K UHD
Graphics card that can support 3840 × 2160 resolution at 30 Hz and that has 1 GB DDR 5 memory
See kb.smarttech.com/?q=15546
Cable requirements
HDMI
HDMI 1.4 compliant or better
Maximum length: 23' (7 m)
Notes:
Use only certified HDMI cables that have been tested to support the performance standard
you require.
The performance of cables longer than 23' (7 m) is highly dependent on the quality of the
cable.
USB
Maximum length: 16' (5 m)
Important
Using cables that exceed these maximum lengths may produce unexpected results, degraded
picture quality or USB connectivity. Refer to the SMART installation standards
(smarttech.com/kb/171035) for a comprehensive guide on cables and extensions for SMART
hardware products.
Storage and operating requirements
Power requirements
100V to 240V AC, 50 Hz to 60 Hz
Power consumption at 77°F (25°C)
Standby mode
48 W
Normal operating
187 W
Maximum operating
199 W
Operating temperature
41–95°F (5–35°C)
Storage temperature
-4–140°F (-20–60°C)
Humidity
5–80% relative humidity, non-condensing
Certification and compliance
Regulatory certification
UL (U.S./Canada), FCC, IC, CE Mark, RCM Mark
Environmental compliance
4
European Union
REACH, RoHS, WEEE and Packaging
U.S.
Packaging and Conflict Minerals
smarttech.com/kb/170816
SPECIFICATIONS
SMART KAPP IQ 65
Purchasing information
Order number
KAPP-IQ65
SMART kapp iQ 65 board
Optional accessories
WM-SBID-501
Fixed wall mount for SMART interactive flat panels
Other
See smarttech.com/businessaccessories
Warranty
Two-year limited equipment warranty
smarttech.com/support
smarttech.com/contactsupport
© 2016 SMART Technologies ULC. All rights reserved. SMART kapp, SMART kapp iQ, DViT, Pen ID, smarttech, the SMART logo and all SMART taglines are trademarks or registered
trademarks of SMART Technologies ULC in the U.S. and/or other countries. iPhone, iPad, iPod touch and Safari are trademarks of Apple Inc., registered in the U.S. and other countries.
Google Play, Android and Chrome are trademarks of Google Inc. The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such marks by SMART Technologies ULC is
under license. “HDMI” and all associated logos are trademarks of HDMI Licensing, LLC. All other third-party product and company names may be trademarks of their respective owners. This
product and/or use thereof is covered by one or more of the following U.S. patents: www.smarttech.com/patents. Contents are subject to change without notice. 11/2016.
smarttech.com/kb/170816
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising