Untitled-1
 Intelligent addressable systems
Devices - network interfaces
Network interfaces
Eaton offer multiple network interfaces which allow our panels and devices a
wider variety of functionality. These network interfaces allow the connection of
the Eaton network system to a computer network, and PC based applications
such as site monitor, site graphic and web server.
TCP/IP interface
EC400
Dual-channel LonWorks
BMS interface
EC200
Lon to RS232 adaptor
EC0232
Lon network booster
EC540
Typical applications:
The EC400 is a high performance,
reliable and secure network
infrastructure device for accessing
Eaton Lon Network of intelligent
addressable control panels over
intranet or ethernet.
Typical applications:
The EC200 dual-channel
LonWorks BMS interface is an
"add-on" to the network which
translates the pre-configured
network variables to a set of
un-configured network variables
which can then be bound to a
BMS, giving full access to the fire
network data.
Typical applications:
The EC0232 Lon to RS232
adapter allows connection of
our system network (LonWorks)
devices to PC based applications
such as site monitor, site graphics
and web server.
The EC400's built in configuration
| _ server manages up to 256 IP
Fibre Optic Poinetasamnt Lirkannel without a
dedicated management PC.
In addition to the standard
adaptor, Eaton offer 2 variants
for use with a HMX PA/VA
system - the ECO232PAVA
with no handshaking, and the
LonWorks Lon-Fiber
EC0232PAVA3D with a 3 min
time delay. NODE y ADAPTR
Control Panel = CFSFLO2 uan 8 vicgw 9 Pane
8 5 expert knowledge and'dedica
Network Card — troubleshooting tool.
Fibre Optic Multi-Drop Link
Fibre optic multi-drop link -
example network diagram
Typical applications:
The Lon network booster (EC540)
Is the solution to interconnect
multiple ElA-709 channels.
This unit provides up to 5 ports
and routes packets between
these ports. In spite of its small
size the (EC540) provides best
class performance and flexibility
in use.
In order to provide the optimal
Easy to uhderttiher diagnobtinWorksouter configuration the (EC540)
FbreEDs all/DARIIES tginstaN@BE supports 2 to 5 ports as well as
fhe 2 operating modes "smart
switch mode" and "configured
a cartputer mode”.
—Fbre — Fore — — Fibre a
CFSFLO2 CFSFLO2 CFSFLO2 CFSFLO2
Lon-Fiber Lon-Fiber Lon-Fiber Lon-Fiber
ADAPT® ADAPT® ADAPT® ADAPT®
| LonWorks | LonWorks | LonWorks |_| LonWorks
е| | NODE | «|| NODE | «|| NODE | «|| NODE
о Control Panel о Control Panel о Control Panel о Control Panel
= & = & = & = &
о O O O
=| Network Card “| Network Card =| Network Card | Network Card
5 5 5 5
a LonWorks a LonWorks a LonWorks || LonWorks
NODE NODE NODE NODE
Control Panel Control Panel Control Panel Control Panel
& & & &
Network Card Network Card Network Card Network Card
36 EATON - FIRE AND VOICE ALARM SYSTEMS CF-CC2556 January 2015 ( €
Intelligent addressable syster8l
e
Devices - network interfac
BACnet gateway
EC650
Modbus gateway
EC700
Typical applications:
The BACnet gateway (EC650) is a
CEA- 709/BACnet gateway which
maps CEA-709 network variables
(NVs) to standard BACnet server
objects. When ordered with this
part code (EC650), the LonWorks
to BACnet address mapping is
pre-loaded and ready for use with
the the intelligent addressable
CF3000 system interface board.
Catalogue numbers
Typical applications:
The modbus gateway is part of
the InfraLINK range of network
infrastructure components from
partners.
All of the modbus gateways
feature a robust hardware platform
with high performance CPU and
UART for fast communications
without loss of data. The
LonWorks to modbus address
mapping is pre-loaded and ready
for use with the CF3000 fire
system interface board.
Single mode Lon to
fibre optic adapter
CFSLO
Dual channel Lon to
fibre optic adapter
CFSLO2
Typical applications:
The single mode Loan to fiber
optic adapter (CFSFLO1) allows
connection of the system
network (LonWorks) devices
through optical fibre, and to allow
both point to point or multi drop
topology.
Typical applications:
The dual channel Lon to fiber
optic adapter (CFSFLO2) allows
connection of the system
network (LonWorks) devices
through optical fibre, and to allow
both point to point or multi drop
topology.
Description Code Description Code
Dual-channel lonworks BMS interface (non handshake) EC200 TCP/IP interface EC400
Dual-channel lonworks BMS interface (handshaking) EC200H Lon network booster EC540
Dual-channel lonworks BMS interface EC200S Bacnet gateway EC650B
(self configuring for use with EC700)
Modbus gateway EC700
Lon to RS232 adapter EC0232
Single mode lon to fibre optic adaptor CFSLO1
Lon to RS232 adapter EC0232PAVA
(For HMX pa/va system - no handshake) Dual channel lon to fibre optic adaptor CFSLO2
Lon to RS232 adapter EC0232PAVAS3D
(For HMX pa/va system - 3 min time delay)
EATON - FIRE AND VOICE ALARM SYSTEMS CF-CC2556 January 2015 37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising